COIL CHARACTERISTICS (Vdc) SERIES H,HD,HP,HT,HTD,HPT GENERAL CHARACTERISTICS. Date of issue: 06/ Page 2 of 5. B Vdc

Size: px

Start display at page:

Download "COIL CHARACTERISTICS (Vdc) SERIES H,HD,HP,HT,HTD,HPT GENERAL CHARACTERISTICS. Date of issue: 06/ Page 2 of 5. B Vdc"

Hilary Patrick
5 years ago
Views:

ENGINEERING DATA SHEET CONTACTOR AMP BalancedForce Design Hermetically sealed Designed to the performance standards of MILPRF6 PRINCIPLE TECHNICAL CHARACTERISTICS Contacts rated at 8 and 5 Vac, 400

1 ENGINEERING DATA SHEET CONTACTOR AMP BalancedForce Design Hermetically sealed Designed to the performance standards of MILPRF6 PRINCIPLE TECHNICAL CHARACTERISTICS Contacts rated at 8 and 5 Vac, 400 Hz, Ø and 5/00 Vac, 400Hz, 3Ø Weight 40 Oz Special units available upon request, including models with auxiliary contacts Optional Ground Fault Protection (GFP) feature available Contact factory for information on MILqualified part numbers APPLICATION NOTES: CONTACT ELECTRICAL CHARACTERISTICS Contact rating per pole and load type [] 8 5 Vac 400 Hz Load current in Amps 5/00 Vac 400 Hz 3Ø 5 Vac Hz DELTA Resistive Inductive [] Motor Intermediate current Load transfer [3] [5] 0 [5] 5/ 65 [5] 65 [5] 5/ / Featuring LEACH power and control solutions wwwesterlinecom AMERICAS 6900 Orangethorpe Ave PO Box 503 Buena Park, CA 906 Tel: (0) Fax: (0) EUROPE Rue Goethe 574 Sarralbe France Tel: (33) Fax: (33) ASIA Units 3 6/F Lakeside No8 Science Park West Avenue Phase Two, Hong Kong Science Park Pak Shek Kok, Tai Po, NT Hong Kong Tel: (85) 9 38 Fax: (85) Data sheets are for initial product selection and comparison Contact Esterline Power Systems prior to choosing a component Date of issue: 06/0 39 Page of 5 Export Control Regulation : EAR 99 These commodities, technology or software are exported from the United States in accordance with the Export Administration Regulations Diversion contrary to US law is prohibited

2 COIL CHARACTERISTICS () CODE A B C F Vac 400Hz Nominal operating voltage Maximum operating voltage Pickup voltage, maximum Nominal High temp test Continuous current test Dropout voltage, maximum Coil resistance in Ohms ±0% at 5 C Coil current max ma at 5 C 90 GENERAL CHARACTERISTICS Temperature range Minimum operating cycles (life) at rated resistive load 50, C to 7 C Minimum operating cycles (life) at 5% rated resistive load 00,000 Dielectric strength at sea level All circuits to ground and circuit to circuit 500 Vrms Coil to ground and aux contacts 000 Vrms Dielectric strength at altitude:50,000 feet Main contacts 700 Vrms Coil and aux contacts 500 Vrms Insulation resistance Initial 00 M Ω min After environmental tests 50 M Ω min Sinusoidal vibration Shock (6 ms duration) Maximum contact opening time under vibration and shock 0 µs Operate time at nominal voltage (Including bounce) Release time at nominal voltage (Including bounce) 0 G / 70 to 000 Hz 50 G 50 ms max 35 ms max [5] DC 5 ms max AC 80 ms max Contact bounce at nominal voltage Weight Power requirements: 3 ms max 40 Oz max 5 Oz max [5] at pickup 5 C 0980 watt at nominal DC voltage 435 watt max 5/00 Vac, 8 5/00 Vac, Amp 5 Amp 500 Amp 50 Amp N [6] Date of issue: 06/0 40 Page of 5

3 NUMBERING SYSTEM H X 0 X [7] HD X 0 X [8] HP X 0 X [4] HT X 0 X [7]HTD X 0 X [8]HTP X 0 X Relay family Mounting Style(A,B,Etc) Terminal & Circuit (,,3,Etc) 3Coil Voltage(A,B,C,F & N) NOTES [] Auxiliary contact rating see page 5, note [] [] Inductive load life, 0,000 cycles [3] Applicable military specification: MS775, MILR6/6, MILR6/43 [4] Suitable for transfer between unsyncronized AC power sources at the ratings indicated: 5 amperes for series "H, HD, HP"; (MS775,7,8,9,0 & 5) Amperes for series "HT, HTD, HTP"; (MS775,,7,8,9 & 0) [5] Terminal type 6, 8, & 0 [6] Suppressed "N" coil has back EMF suppression to 4 volts max Consult factory [7] Nonhermetic, gasket sealed version [8] Nonhermetic, nonmetallic cover gasket sealed version (Not available with mounting style C) Date of issue: 06/0 4 Page 3 of 5

4 CONFIGURATION STYLES STANDARD TOLERANCE: XX ± 03, XXX ± 00 Date of issue: 06/0 4 Page 4 of 5

5 TERMINAL CONFIGURATION AND CIRCUIT DIAGRAMS SERIES H,HD,HP,HT,HDT,HPT TERMINAL TYPE 3 PDT C C B B A X TERMINAL TYPE 3 PST NO C C B B A X TERMINAL TYPE 3 3 PST NO WITH SPST NO & SPST NC AUXILIARY CONTACTS C C B B A 3 X TERMINAL TYPE 4 3 PDT WITH SPST NO AUX C C B B A X TERMINAL TYPE 5 3 PDT WITH SPST NC AUX 3 C C B B A X TERMINAL TYPE 6 SPST NO DM WITH SPST NO SPST NC AUX A 3 X TERMINAL TYPE 7 3 PDT WITH SPDT AUX MOUNTING STYLE "C" ONLY 3 C C B B X TERMINAL TYPE 8 SPST NC DB WITH PDT AUX 3 A4 TERMINAL TYPE 9 IS A GENERAL CATAGORY USED FOR ALL TERMINAL TYPES NOT ILLUSTRATED FOR OTHER VARIATIONS OF TERMINAL CONFIGURATIONS PLEASE CONTACT FACTORY TERMINAL TYPE 0 SPDT DB/DM WITH PDT AUX 3 A X A4 A X X X TERMINAL TYPE, 4, 5 TERMINAL TYPE 7 STANDARD COIL "A","B","C","F" SUPPRESSED COIL "N" POLARITY INDICATION APPLIES TO DC COILS ONLY AUXILIARY CONTACT RATING: 50 8 VDC OR 5 VAC RESISTIVE INDUCTIVE LAMP CONTACT BOUNCE AT NOMINAL VOLTAGE (SECONDS) 5 AMP 3 AMP AMP 004 TERMINAL TYPE, 3, 6, 8, 0 NOTE: OTHER AUXILIARY CONTACT FORMS ARE AVAILABLE PLEASE CONTACT FACTORY NOTE: Although all configuration and/or terminal type options are available, some combinations may require a setup charge and be subject to minimum order size Date of issue: 06/0 43 Page 5 of 5

PERFORMANCE SPECIFICATION

INCH-POUND MIL-PRF-6106/13F 17 November 2011 SUPERSEDING MIL-PRF-6106/13E 10 November 2000 PERFORMANCE SPECIFICATION RELAY, ELECTROMAGNETIC, 25 AMPERE, 3PST, NO, WITH 2 AMPERE 1PDT AUXILIARY CONTACTS,