RM17UB3. Price* : USD

Transcription

1 Characteristics voltage control relay RM17-U - range V AC Product availability : Stock - Normally stocked in distribution facility Price* : USD Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters Time delay Switching capacity in VA Minimum switching current Maximum switching current Power consumption in VA Measurement range Sep 17, 2018 Zelio Control Modular measurement and control relays Voltage control relay For 3-phase supply RM17UB3 Absence of neutral Overvoltage and undervoltage between neutral Overvoltage and undervoltage between phases Adjustable s, % on crossing the threshold 1250 VA 10 ma at 5 V DC 5 A AC/DC VA at 400 V AC 50 Hz V voltage AC Utilisation category AC-12 conforming to IEC AC-13 conforming to IEC AC-14 conforming to IEC AC-15 conforming to IEC DC-12 conforming to IEC DC-13 conforming to IEC DC-14 conforming to IEC Complementary Reset time Maximum switching voltage 1500 ms time delay 250 V AC/DC [Us] rated supply voltage V AC, 50/60 Hz +/- 10 % Supply voltage limits Voltage detection threshold V AC 183 V 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

2 Control circuit frequency Hz +/- 10 % Output contacts Nominal output current Measuring cycle 1 C/O 5 A Hysteresis 2 % Delay at power up Measurement accuracy Repeat accuracy Measurement error Response time Quality labels <= 150 ms measurement cycle as true rms value <= 650 ms +/- 10 % of the full scale value +/- 0.5 % input and measurement circuit +/- 1 % time delay < 1 % over the whole range with voltage variation 0.05 %/ C with temperature variation < 200 ms in the event of a fault Overvoltage category III conforming to IEC CE Insulation resistance > 500 MOhm at 500 V DC conforming to IEC > 500 MOhm at 500 V DC conforming to IEC [Ui] rated insulation voltage 400 V conforming to IEC Operating position Connections - terminals Any position without derating Screw terminals 1 x x 4 mm² - AWG 20...AWG 11, solid cable without cable end Screw terminals 2 x x 2.5 mm² - AWG 20...AWG 14, solid cable without cable end Screw terminals 2 x x 1.5 mm² - AWG 24...AWG 16, flexible cable with cable end Screw terminals 1 x x 2.5 mm² - AWG 24...AWG 12, flexible cable with cable end Tightening torque lbf.in ( N.m) conforming to IEC Housing material Local signalling Self-extinguishing plastic LED green power ON LED yellow relay ON Mounting support 35 mm symmetrical DIN rail conforming to EN/IEC Electrical durability Mechanical durability Operating rate Safety reliability data Width Product weight cycles <= cycles <= 360 operations/hour under full load MTTFd = years B10d = in (17.5 mm) 0.18 lb(us) (0.08 kg) Environment Electromagnetic compatibility Emission standard for industrial environments conforming to EN/IEC Emission standard for residential, commercial and light-industrial environments conforming to EN/IEC Immunity for industrial environments conforming to NF EN/IEC Standards EN/IEC Product certifications Directives Ambient air temperature for storage Ambient air temperature for operation CSA C-Tick GL GOST UL 89/336/EEC - electromagnetic compatibility 73/23/EEC - low voltage directive F ( C) F ( C) Relative humidity 95 % at 131 F (55 C) conforming to IEC Vibration resistance 0.35 mm (f = Hz) conforming to IEC gn (f = Hz) conforming to IEC Shock resistance 5 gn conforming to IEC IP degree of protection IP20(Terminals) conforming to IEC IP30 (casing) conforming to IEC Pollution degree 3 conforming to IEC Dielectric test voltage 2 kv AC 50 Hz, 1 min 2

3 Non-dissipating shock wave 4 kv Ordering and shipping details Category RELAYS-MEASUREMENT (RM17-RM35) Discount Schedule CP2 GTIN Nbr. of units in pkg. 1 Package weight(lbs) 0.19 Returnability Y Country of origin ID Offer Sustainability Sustainable offer status RoHS (date code: YYWW) REACh Green Premium product Compliant - since Schneider Electric declaration of conformity Schneider Electric declaration of conformity Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold Product environmental profile Product end of life instructions California proposition 65 Available Available WARNING: This product can expose you to chemicals including: Substance 1 Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm More information For more information go to Contractual warranty Warranty period 18 months 3

4 Dimensions Drawings 3-Phase Voltage Control Relays Dimensions and Mounting 4

5 Connections and Schema 3-Phase Voltage Control Relays Wiring Diagram 5

6 Technical Description Function Diagrams Phase Failure Detection (U measured < 0.7 x nominal supply voltage) Control of Overvoltage and Undervoltage Legend Un Nominal supply voltage R Output relay Tt Overvoltage and undervoltage threshold delay (adjustable on front panel from 0.3 to 30 s) H Hysteresis U> Overvoltage threshold U< Undervoltage threshold L1, L2, L3 Phases of the supply voltage monitored 11-12, R1 output relay connections Relay status: black color = energized. 6