Turns innovation into fascination signage with OSRAM LEDs

Transcription

1 Turns innovation into fascination signage with OSRAM LEDs New 03

2 One-stop solution provider for signage One-stop solution provider for signage Thanks to an efficient overall system, OSRAM sets standards for modern signage with maimum cost efficiency and durability as well as minimal maintenance requirements. The portfolio consists of particularly robust LED modules, perfectly matched control gears and practical tools for quick and easy installation. Discover the second generation: BoLED Plus and BackLED Plus OSRAM portfolio for signage Products Accessories & services Light management solutions The new generation of BoLED Plus and BackLED Plus modules from OSRAM has been significantly optimized. Here are the most important improvements at a glance: Higher application fleibility and easy installation Smaller module dimensions Additional mounting profile for BackLED Plus More value for money Lower investment costs Single-board cuttability The cutting resolution is one module LED modules: BoLED Side BoLED Side Plus BoLED Back Plus BoLED Back Plus DS BackLED S, M and L Plus NEW OPTOTRONIC control gears: OPTOTRONIC V:, 30, 60, 0 W OPTOTRONIC : 30, 0, 80, 0, 40 W OPTOTRONIC DIM: 80, 0, 40 W Universal mounting profiles for BoLED and BackLED Calculation tools, e.g. OSRAM LED designer Checklist for signage applications Trainings Service and application support Technical application guides OT DIM OTi DALI DIM * OTi DALI DIM LI * * For further information, see

3 One-stop solution provider for signage Your benefits System + guarantee OSRAM LED designer Maimum reliability System + Guarantee on LED modules and control gears Efficient system solutions Click & Play: Mounting profile reduces installation time Uniform illumination and backlighting Unique Flat-Ray Technology provides uniform illumination LED modules from OSRAM achieve their optimum functionality when operated as a system in conjunction with OSRAM ECGs, as both components are always perfectly matched to one another. That s why we offer a comprehensive guarantee for control gears and LED modules from OSRAM. All details on the relevant products and systems, registration and the general guarantee requirements can be found at: Simply by entering some basic data, this online software automatically calculates the required number of components and the correct arrangement of the LED modules in order to ensure a homogeneous backlighting of the given application. + = 3

4 Light boes Light boes The robust BoLED module chains are especially suited for the uniform illumination of single and double-sided light boes. The LED modules are connected with fleible cables and therefore do not have to be connected separately. With the BoLED mounting profile, the installation of the modules becomes even easier. 4

5 Light boes BoLED Side BoLED Side Plus BoLED Back Plus Illumination through side lighting 8 LED modules per chain Uniform backlighting thanks to specially designed elliptical lenses Optional application of the BoLED mounting profile Illumination through side lighting 3 LED modules per chain Light colors: White 600 K, 4000 K and 3000 K Optional application of the BoLED mounting profile Uniform backlighting with minimum number of modules 3 LED modules per chain Light colors: White 600 K, 4000 K and 3000 K Optional application of the BoLED mounting profile For information on the mounting profiles, see page.

6 BoLED Back Plus DS BoLED Back Plus DS The BoLED Back Plus DS modules are perfectly designed for larger double-sided light boes. Together with the dedicated mounting accessories of profile and brackets, the installation of the system is easy, quick and safe. The Flat-Ray Technology allows for the uniform illumination of both sides of the light bo. 6

7 BoLED Back Plus DS BoLED Back Plus DS Innovative mounting system One BoLED Back Plus DS chain comprises 6 LED modules with LEDs each 80 lm (600 K) per module with a power consumption of 7.0 W Efficacy of up to 80 lm/w including optics Required BoLED mounting accessories (profile and brackets) Brackets allow for an installation of the mounting profile at an angle of 90 Easy installation by clicking the profile into the bracket One bracket for the left side and one for the right side 7

8 Channel letters Channel letters The highly efficient BackLED Plus module chains are an economical alternative to conventional neon tubes for the uniform backlighting and/or illumina tion of channel letters even at high pitches between LED modules. 8

9 Channel letters BackLED S Plus For small and/or flat channel letters 90 LED modules per chain Light colors: White 600 K, 4000 K and 3000 K; blue Smallest operating unit: Three LED modules without termination unit, one or two LED modules with termination unit For medium-sized channel letters as well as for light bo applications 40 LED modules per chain Light colors: White 600 K, 4000 K and 3000 K; red and orange Optional application of the BackLED mounting profile For large and/or deep channel letters as well as for light bo applications 3 LED modules per chain Light colors: White 600 K, 4000 K and 3000 K Optional application of the BackLED mounting profile For information on the mounting profiles, see page. 9

10 OPTOTRONIC control gears Efficient constant-voltage LED drivers OPTOTRONIC control gears OPTOTRONIC -volt and 4-volt control gears are perfectly matched to the LED modules applied for signage. Together, all components form an etremely efficient unit. In order to meet the high levels of durability and installation convenience required for outdoor applications, they comply with the highest quality standards and thus make the overall system even more economical. V Power output of -volt control gears: W, 30 W, 60 W, 0 W Type of protection: and IP66 Smart Power Supply Power output of 4-volt control gears: 30 W, 0 W, 80 W, 0 W, 40 W 4-volt control gears optionally available with integrated...0-volt dimming interface Type of protection: and IP66 Smart Power Supply 0

11 Mounting profi les Mounting profi les Mounting profile for BoLED Side, Side Plus and Back Plus BX-MP Mounting profile for BoLED Back Plus DS BX-DS-MP Mounting profile for and L Plus BA-MP Optional mounting profile for easy installation Slide holes for fiation of cables and easier LED module distance calculation Required mounting accessories (profile and brackets) for easy installation Slide holes for fiation of cables and easier LED module distance calculation Optional mounting profile for easy installation

12 More information and tools: OSRAM GmbH Head office Marcel-Breuer-Strasse Munich Germany Phone Fa EBW00GB 0/3 OSRAM S-GI MK EM Subject to change without notice. Errors and omissions ecepted.

13 osram. sram.de/li sram de chtwerbung OPTOTRONIC control gears Mounting profile ) Side lighting (single and double-sided) ) Backlighting (single-sided) 3) Backlighting (double-sided) OT /0-40/ P V On the inside of the edges (BoLED Side and Side Plus with BX-MP) V OT 60/0-40/ P OT 30/0-40/4 P V OT 30/0-40/ P OT 0/0-40/4 P V OT 0/0-40/ P Turns innovation into fascination signage with OSRAM LEDs OT 80/0-40/4 (DIM) P Dedicated mouting profile with mounting brackets for BoLED Back Plus DS with BX-DS-MP On the back plane of the light bo (BackLED L/M Plus with BA-MP, BoLED Back Plus with BX-MP) New 03 Technical data Mounting profile functions and dimensions Product reference BoLED Mounting Profile BoLED Back Plus DS Mounting Profile BackLED L/M Plus Mounting Profile Total length:,000 mm Total length:,36 mm Slot holes for the mounting of the profile on the rear board or side board of the light bo. Holes for the easy installation of a mounting grid. The constant hole spacing of /0 mm provides consistent pitches of LED modules without measuring. Square holes for simple fiing of electrical cables with cable ties. Embossings/edges for the easy click-in of the individual LED modules (Click & Play). Holes for the easy installation of a mounting grid. The constant hole spacing of 0 mm provides consistent pitches of LED modules without measuring. Mounting brackets for BoLED Back Plus DS to connect the mounting profile with LED modules to the mounting profile which is assembled on the side of the bo. Marcel-Breuer-Strasse Munich Germany Phone Fa OT 40/0-40/4 (DIM) P Reduces installation time and costs Minimized mechanical installation effort: - Can be easily cut to a shorter length - Minimal effort required for measuring and marking - No templates necessary - Reduced number of mounting points Minimal electrical wiring required Power Power factor half load/full load Overload protection OT /0-40/ P OT 30/0-40/ P OT 60/0-40/ P OT 0/0-40/ P OT 30/0-40/4 P OT 0/0-40/4 P OT 80/0-40/4 P OT 80/0-40/4 DIM P OT 0/0-40/4 P OT 0/0-40/4 DIM P OT 40/0-40/4 P OT 40/0-40/4 DIM P V V V V IP66 IP66 IP66 IP66 W 30 W 60 W 0 W 30 W 0 W 80 W 80 W 0 W 0 W 40 W 40 W / / / / / / / / / / / /0.9 Special features: Efficient constant-voltage LED driver Operation at ambient temperatures of - C to + C Lifetime of up to 0,000 h at Ta = +4 C* Type of protection:, IP66 Smart Power Supply 0/3 OSRAM S-GI MK EM Subject to change without notice. Errors and omissions ecepted. Head office: OT 0/0-40/4 (DIM) P OSRAM GmbH Total length:,000 mm Ingr ngress es Ingress protection OPTOTRONIC 000 Output voltage 0 Product number Click & Play (installation of the LED modules) Easy and uniform positioning of the LED modules thanks to mounting grid Quick and easy click-in of the LED modules without tools Additional sticking or screwing also possible (modules come with prefabricated screw holes and adhesive strips) Applications: Outdoor signage Applications with a constant voltage of V or * Failure rate ma. 0 % Number of LED chains and modules per control gear BoLED Side BoLED Side Plus BoLED Back Plus BoLED Back Plus DS BackLED S Plus () () Chains Chains Chains Chains Modules Chains Modules Chains Modules Chains Modules Modules Modules Modules OT /0-40/ P /4 / 4 / 0 /4 8 OT 30/0-40/ P / / 6 OT 60/0-40/ P OT 0/0-40/ P OT 30/0-40/4 P /4 8 /4 8 /4 4 OT 0/0-40/4 P / 3 / 3 / 6 OT 80/0-40/4 (DIM) P /3 /3 /3 OT 0/0-40/4 (DIM) P OT 40/0-40/4 (DIM) P

14 BoLED Side BoLED Side Plus BoLED Side BoLED Back Plus BoLED Side Plus BoLED Side BoLED Back Plus DS BoLED Back Plus BoLED Side Plus BackLED S Plus BoLED Back Plus DS BoLED Back Plus BackLED S/M/L Plus Product application matri Application Light boes Type Height [m] Single-sided Small Small to Large (0.3.0) medium (>.0) (0.3.0) Depth [mm] 7 BoLED Side BoLED Side Plus BoLED Back Plus BoLED Back Plus DS BackLED S Plus BackLED S Plus BoLED Back Plus DS Channel letters Product reference Product number, ) ) ) ) ) Flat-Ray Technology Specially designed lenses provide uniform illumination at high LED pitches of LED modules (beam angle of ) Up to 30 % higher application efficiency as compared to systems without lenses BoLED Side BX03SA-W4F-76 BX03SA-W4F-840 BX03SA-W4F (3) 8 (3) 8 (3) 60 (7.) 60 (7.) 60 (7.) (49.) 376 (409.) 308 (388.) 3 (6) 3 (6) 3 (6) (3.6). (3.6). (3.6) (90) 7680 (40) 7680 (40) 3 (6) 3 (6) 3 (6) (3.6). (3.6). (3.6) (90) 7680 (40) 7680 (40) Product reference Quick selection guide: BoLED Back Plus, BoLED Back Plus DS, BackLED S/M/L Plus for light boes ) Applicable Applicable, ratio of height:depth : Applicable, ratio of height:depth 0: Applicable, depth 0 mm Double-sided light boes: BoLED Back Plus (DS) Technical data Technical data 0 00 Single-sided light boes: BoLED Back Plus BackLED S Plus All sizes All sizes All sizes All sizes Depth of light bo [mm] Double-sided Small Small to Large (0.3.0) medium (>.0) (0.3.0) Product number, ) ) ) ) ) BackLED S Plus BA0SB-W4F-76 BA0SB-W4F-840 BA0SB-W4F-830 BA0SB-B blue 90 () 90 () 90 () 4 () 8.8 (0.3) 8.8 (0.3) 8.8 (0.3) 4.4 (0.3) (3) 340 (6) 070 (3) 70 (6) red orange 40 (3) 40 (3) 40 (3) 40 (3) 40 (3) 8.8 (0.7) 8.8 (0.7) 8.8 (0.7) 8.8 (0.7) 8.8 (0.7) (7) 0 (63) 00 () 70 (8) 960 (4) BoLED Side Plus BX06SA-W4F-76 BX06SA-W4F-840 BX06SA-W4F BA03MA-W4F-76 BA03MA-W4F-840 BA03MA-W4F-830 BA03MA-R BA03MA-O BoLED Back Plus BX06BA-W4F-76 BX06BA-W4F-840 BX06BA-W4F BA03LA-W4F-76 BA03LA-W4F-840 BA03LA-W4F-830 BoLED Back Plus DS BXBA-W4F () 4. (7.) (80) (3) 3 (3) 3 (3) 7.6 (.8) 7.6 (.8) 7.6 (.8) (0) 4000 () 4000 () Quick selection guide: BoLED Back Plus, BackLED L/M/S Plus for channel letters ) Depth of channel letter [mm] BoLED Back Plus BackLED S Plus Accessory: BackLED S Plus Terminal Accessory: BoLED Mounting Profiles BA0SB-TERM ) BX-MP BX-DS-MP BX-DS-MB for BoLED Side, Side Plus, Back Plus for BoLED Back Plus DS for BoLED Back Plus DS ) Accessory: BackLED L/M Plus Mounting Profile BA-MP Modules are perfectly matched to / V OSRAM OPTOTRONIC electronic control gears. Maimum overall length: BX06SA = 9.6 m, BX06BA =.8 m, BX03SA = 3.6 m. For current photometric data and important safety, installation and application information, see Modules are perfectly matched to V OSRAM OPTOTRONIC electronic control gears. Maimum overall length: BA03LA = 9.6 m, BA03MA = 8.0 m, BA0SB () =. m, BA0SB (blue) =.6 m. For current photometric data and important safety, installation and application information, see ) In view of the comple manufacturing process for light-emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. ) "Left" and "Right" ) In view of the comple manufacturing process for light-emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. ) Can be ordered as additional accessory. Two pieces of the BackLED S Plus Terminal already come with each chain of BackLED Plus. Color No. of LED modules per chain (no. of LEDs per module) Direct-current voltage in V Rated wattage in watts per chain (rated wattage in watts per module) Beam angle in degrees Color temperature in K Luminous flu in lumen per chain (luminous flu in lumen per module) Standard pack/pcs. Optimal product performance at maimum LED pitch Good product performance at maimum LED pitch Good product performance at reduced LED pitch Limited performance no homogeneous backlighting Limited performance reduced efficiency ) The selection can vary depending on the special characteristics of the illuminated sign, e.g. concerning front material or type of application. ) Maimum distance of LED module centers [mm].