Not recommended for use in applications where there is high probability for exposure to liquid (e.g., cutting fluid) on the sensing surface area.

Transcription

1 Bulletin Z Product Overview Bulletin Z Bulletin Z Zero-Force Touch Buttons are ideally suited for use in two-hand machine control systems and highly repetitive applications. Ergonomic Design The contour shape fits the palm of the hand for ease of operation and helps deter attempts to defeat two-hand control. Zero Force to Operate The electronic design with two interlinked capacitive sensors in offset planes provides increased sensitivity and good ability for distinguishing between a person's hand, even through most industrial gloves, versus most foreign objects. ATTENTION: Not recommended for use in applications where there is high probability for exposure to liquid (e.g., cutting fluid) on the sensing surface area. Table of Contents Specifications... this page LIne... - Heavy Industrial Line - Quick Disconnect Cables... - Accessories... - Wiring Diagram... - Approximate Dimensions... - Specifications Mechanical Ratings Vibration Endurance Mechanical Shock Degree of Protection Operating Force Input Voltage (Relay type) Input Voltage (Solid-State type) Electrical Design Life (Relay type) Line (Z-G) Mechanical Ratings Heavy Industrial Line (Z-H) G,. mm displacement G (mechanical durability) Type /X/ IP psi Washdown Zero Electrical Ratings Type / IP Low Voltage: V DC, V AC Full Voltage (Z-GF): V AC (+%, -%) Low Voltage (Z-GN/GP): V DC Relay output A inductive A resistive Relay output A inductive. A resistive Degree of Protection IPX Wire Range # AWG (. mm) Tightening Torque lb in ( N m) On-delay/Off-delay Off ms max. On ms max. Current Draw (Solid-State type) ma at V DC =. W (no external load) Environmental Temperature Range (Operating) C (- + F) Temperature Range (Storage) C (- + F) Humidity % RH from... C ( F) (full operation) Materials Housing/Guard Valox Gasket BUNA-N / in. Cork-BUNA-N Connector Certifications Standards Conformity Insulator material (micro connector) = nylon Insulator material (mini connector) = PVC Standards and Certifications culus, CE, C-TICK, CSA UL, CSA. No., EN/IEC --, EN-, EN--, EN-, EN- Load Life Curves for Product Line DC Voltage (V DC) - Maximum DC Load breaking capacity DC Current (A) resistive load Load Life Curves for Heavy Industrial Line Rated Operating Current (A) - Maximum load breaking capacity DC inductive load L/R= ms AC resistive load AC inductive load (pf=.) DC resistive load Rated Operating Voltage (V) Applications Detail Operations Service life (x³ operations) - Electrical endurance V AC resistive load Switching Current (A) - Electrical endurance V AC resistive load V DC resistive load V AC inductive load (pf=.) V DC inductive load L/R= ms Rated Operating Current (A) LED Blink Rate Diagnostic ** ** ** Power Up *** *** *** Noise Detection **** **** **** Margin Detection Device touched during power up. Device will resume seconds after removal of hand. Device detected an unacceptable level of noise (> V/m). Device will resume once noise subsides. A conductive film is building up on the sensing surface. Device will resume once cleared. - Publication A-CAA-EN-P

2 Bulletin Z Product Selection Line Momentary Touch Buttons Z-GFQ Z-GLQB Mounting Hole Size Input Voltage Output Type Electrical Connection. mm. mm...v AC...V DC and...v AC...V AC...V DC and...v AC No Guard Black Guard -Pin QD Z-GFQ Z-GFQB ft Cabled -Wire Z-GF Z-GFB -Pin QD Z-GLQ Z-GLQB ft Cabled -Wire Z-GL Z-GLB -Pin QD Z-GFQ Z-GFQB ft Cabled -Wire Z-GF Z-GFB -Pin QD Z-GLQ Z-GLQB ft Cabled -Wire Z-GL Z-GLB Use the configurator below to build a Bulletin Z touch button to suit your application. L F P a Input Voltage and Output Type Input: V DC and V AC Input: V AC Transistor Output V DC PNP (sourcing) output b Mounting Hole Size. mm. mm Z G L B Electrical Connection Sourcing Output Q -pin QD ft (. m) cabled ft (. m) cabled Q -pin QD ft (. m) cabled ft (. m) cabled a b c d c Blank B Y d Guard Option No guard Black guard Yellow guard These devices are transistor outputs. These devices have separate N.O. and N.C. output relays with a shared common. Safety relays should be used in conjunction with two relay output type in -hand control applications. Order separately, safety relay R-D for V, R-D for V, R-D for V.. mm touch buttons use micro connector,. mm touch buttons use mini connector. Publication A-CAA-EN-P -

3 Bulletin Z Product Selection Heavy Industrial Line Momentary Touch Buttons Heavy Industrial Z-HF Button Type Input Voltage Output Type Electrical Connection Flush Mount Heavy Industrial Z-HLY No Guard Yellow Guard...V DC and...v AC Terminal Block Z-HL Z-HLY...V AC Terminal Block Z-HF Z-HFY Use the configurator below to build a Bulletin Z touch button to suit your application. L a Voltage Input: V DC and V AC Z H L Y Mounting Type Flush mounting a b c b Input: V AC F Heavy industrial devices have an -position terminal block connection. See wiring diagrams on page - for details. Safety relays should be used in conjunction with two relay output type Zero-Force Touch Buttons in -hand control applications. Order separately, safety relay R-D for V, R-D for V, R-D for V. Quick Disconnect Cables Blank Y c Guard Option No guard Yellow guard D N a Mounting Hole Size. mm (micro). mm (mini) No right angle QD cable (micro) for -pin ( D-RA_). PD D F A C- a b c d b d QD Type Cable Length/Type F Straight QD cable C- m (micro) R Right angle QD cable C- m (micro) Pin Style A pin A pin c PD C- m (micro) E-F ft. (mini) E-F ft. (mini) E-F ft. (mini) - Publication A-CAA-EN-P

4 Bulletin Z Accessories Accessories Z-GAG Z-GAG Guards These guards help protect against accidental activation of the touch button surface and protect it from damage. Can be used for both the. mm and. mm mounted products. Yellow Plastic Black Plastic Z-GAG Z-GAG Mounting Ring Nut for. mm Holes Used on. mm devices. Z-GAH Plastic Mounting Kit Z-GAH Mounting Ring Nut for. mm Hole Used on. mm devices. Z-GAH Plastic Mounting Kit Z-GAH. mm Swivel/Tilt Mounting Assembly This bracket allows you to orient the touch button in any position. It can be mounted on any vertical or horizontal surface. Compatible with. mm mounting only.. in. ( mm) - Swivel Assembly -. in. ( mm) -. mm to. mm Hole Size Adapter This adapter allows a. mm push button operator to be installed in a panel with existing. mm mounting holes. Metal F-AHA E-AHA Black Metal E-AHA Publication A-CAA-EN-P -

5 Bulletin Z Accessories Accessories Heavy Industrial Z-HAG Guard This guard helps protects against accidental activation of the touch surface and protects it from damage. Mounting screws are included. Yellow Plastic Z-HAG Mounting Bases The heavy industrial line products mount directly on these bases. The conduit hub(s) come with a / inch opening. P-B Single Hub Base P-B Double Hub Base P-B P-B Adapter This adapter is used if mounting touch button onto a -/ in. x -/ in. (. x. mm) enclosure pattern. P-N P-N Replacement Relay Note: Package quantity of....v Z-N Z-N Replacement Screws Guard-to-Base Mounting Note: package quantity of Z-HAH Z-HAH Base Mounting Note: package quantity of Z-HAH - Publication A-CAA-EN-P

6 Bulletin Z Wiring Diagram Wiring Diagrams Touch Button Terminations Line Electrical Connections:...V DC and...v AC Input Voltage ();...V AC Input Voltage (Relay Output) Note: Separate N.O. and N.C. output relays with shared common. -Conductor Cabled () For Z-GL _ For Z-GF _ (+) L (-) L (N.O.) (N.C.) GREY (COMMON) ( N.O.) ( N.C.) ( N.C.) (+) L (-) L GREY (COMMON) (+) L (-) L ( N.O.) GREY (COMMON) Electrical Connections:...V DC Input Voltage (Transistor Output); ma Max. per Circuit Output -Conductor Cabled (+) L (-) L (N.O.) (N.C.) ( N.O.) ( N.C.) ( N.C.) (+) L (-) L (+) L (-) L ( N.O.) Heavy Industrial Line N.C. COM N.O. N.C. COM N.O. (-) L (+) L Terminal Block Publication A-CAA-EN-P -

7 Bulletin Z Approximate Dimensions Approximate Dimensions Dimensions in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes.. (.). (.) mm Version Micro Quick Disconnect. (.). (.). (.). (.) mm Version Mini Quick Disconnect. (.) mm Version Cable. (.). (.) With Guard mm Version Cable Heavy Industrial. (.) Heavy Industrial With Guard Replaceable Relay Terminal Block Cutout and Mounting Screw Locations for a Flush Mounted Cover Cut out Holes for #- Screw - Publication A-CAA-EN-P