NB Appendix CIP NB-0 - Cyber Security Recovery Plans for BES Cyber Systems
|
|
|
- Colleen Harrell
- 5 years ago
- Views:
Transcription
1 This appendix establishes modifications to the FERC approved NERC standard CIP for its specific application in New Brunswick. This appendix must be read with CIP to determine a full understanding of the requirements of the standard for New Brunswick. Where the standard and appendix differ, the appendix shall prevail. For the purpose of this standard the term "Bulk Electric System" and its acronym, "BES" shall mean the "bulk power system" (BPS) as defined in the New Brunswick Reliability Standards Regulation - Electricity Act. The term BES Cyber Asset as used in this Appendix or CIP means BPS Cyber Asset as defined in section G. The term BES Cyber System as used in this Appendix or CIP means BPS Cyber System as defined in section G. The term BES Cyber System Information as used in this Appendix or CIP means BPS Cyber System Information as defined in section G. A. Introduction 1. Title: Cyber Security Recovery Plans for BES Cyber Systems 2. Number: CIP Purpose: 4. Applicability: 4.1. Functional Entities: Balancing Authority Distribution Provider is part of a Load shedding program that is subject to one or more requirements in a New Brunswick Energy and Utilities Board approved reliability standard or Regional Reliability Standard; and 1
2 Each Special Protection System or Remedial Action Scheme where the Special Protection System or Remedial Action Scheme is subject to one or more requirements in a New Brunswick Energy and Utilities Board approved reliability standard or Regional Reliability Standard Each Protection System (excluding UFLS and UVLS) that applies to Transmission where the Protection System is subject to one or more requirements in a New Brunswick Energy and Utilities Board approved reliability standard or Regional Reliability Standard Generator Operator Generator Owner Interchange Coordinator or Interchange Authority Reliability Coordinator Transmission Operator Transmission Owner 4.2. Facilities: Distribution Provider: is part of a Load shedding program that is subject to one or more requirements in a New Brunswick Energy and Utilities Board approved reliability standard or Regional Reliability Standard; and Each Special Protection System or Remedial Action Scheme where the Special Protection System or Remedial Action 2
3 5. Effective Dates: Scheme is subject to one or more requirements in a New Brunswick Energy and Utilities Board approved reliability standard or Regional Reliability Standard Each Protection System (excluding UFLS and UVLS) that applies to Transmission where the Protection System is subject to one or more requirements in a New Brunswick Energy and Utilities Board approved reliability standard or Regional Reliability Standard Responsible Entities listed in 4.1 other than Distribution Providers: Exemptions: Background: 3
4 B. Requirements and Measures R1. M1. NB Appendix CIP Table R1 Recovery Plan Specifications Part Applicable Systems Requirements Measures R2. M2. CIP Table R2 Recovery Plan Implementation and Testing Part Applicable Systems Requirements Measures
5 R3. M3. NB Appendix CIP Table R3 Recovery Plan Review, Update and Communication Part Applicable Systems Requirements Measures
6 C. Compliance NB Appendix 1. Compliance Monitoring Process: 1.1. Compliance Enforcement Authority: Compliance Enforcement Authority (CEA) means the New Brunswick Energy and Utilities Board Evidence Retention: 1.3. Compliance Monitoring and Assessment Processes: 1.4. Additional Compliance Information: 6
7 2. Table of Compliance Elements NB Appendix R # Time Horizon VRF Violation Severity Levels (CIP-009-6) Lower VSL Moderate VSL High VSL Severe VSL R1 R2 R3 7
8 D. Regional Variances E. Interpretations F. Associated Documents G. New Brunswick Definitions BPS Cyber Asset: BPS Cyber System: BPS Cyber Information: A Cyber Asset that if rendered unavailable, degraded, or misused would, within 15 minutes of its required operation, misoperation, or nonoperation, adversely impact one or more Facilities, systems, or equipment, which, if destroyed, degraded, or otherwise rendered unavailable when needed, would affect the reliable operation of the bulk power system. Redundancy of affected Facilities, systems, and equipment shall not be considered when determining adverse impact. Each BPS Cyber Asset is included in one or more BPS Cyber Systems. One or more BPS Cyber Assets logically grouped by a responsible entity to perform one or more reliability tasks for a functional entity. Information about the BPS Cyber System that could be used to gain unauthorized access or pose a security threat to the BPS Cyber System. BPS Cyber System Information does not include individual pieces of information that by themselves do not pose a threat or could not be used to allow unauthorized access to BPS Cyber Systems, such as, but not limited to, device names, individual IP addresses without context, ESP names, or policy statements. Examples of BPS Cyber System Information may include, but are not limited to, security procedures or security information about BPS Cyber Systems, Physical Access Control Systems, and 8
9 Electronic Access Control or Monitoring Systems that is not publicly available and could be used to allow unauthorized access or unauthorized distribution; collections of network addresses; and network topology of the BPS Cyber System. Version History (maintained by NBEUB) Version NBEUB Approval Date NB Appendix Effective Date Change Tracking Comments 1. Bulk Electric System(BES)replaced with bulk power system throughout 2. Revised Section A to replace NERC with New 0 09/07/16 01/01/17 Brunswick Energy and Utilities Board approved reliability standard 3. Revised Section C to clarify the NBEUB as the entity having the compliance enforcement authority for NB 4. Revised the Guidelines to remove reference to NERC for functional entities Approved Under NBEUB Matter 325 9
10 Guidelines and Technical Basis Section 4 Scope of Applicability of the CIP Cyber Security Standards Section 4.1. Functional Entities is a list of functional entities to which the standard applies. If the entity is registered as one or more of the functional entities listed in Section 4.1, then the CIP Cyber Security Standards apply. Note that there is a qualification in Section 4.1 that restricts the applicability in the case of Distribution Providers to only those that own certain types of systems and equipment listed in 4.2. Requirement R1: Requirement R2: Requirement R3: Rationale: 10
NB Appendix CIP NB-0 - Cyber Security Personnel & Training
This appendix establishes modifications to the FERC approved NERC standard CIP-004-5.1 for its specific application in New Brunswick. This appendix must be read with CIP-004-5.1 to determine a full understanding
CIP Cyber Security Configuration Change Management and Vulnerability Assessments
CIP-010-2 3 Cyber Security Configuration Change Management and Vulnerability Assessments A. Introduction 1. Title: Cyber Security Configuration Change Management and Vulnerability Assessments 2. Number:
CIP Cyber Security Configuration Change Management and Vulnerability Assessments
CIP-010-2 Cyber Security Configuration Change Management and Vulnerability Assessments A. Introduction 1. Title: Cyber Security Configuration Change Management and Vulnerability Assessments 2. Number:
Standard CIP Cyber Security Critical Cyber As s et Identification
A. Introduction 1. Title: Cyber Security Critical Cyber Asset Identification 2. Number: CIP-002-4 3. Purpose: NERC Standards CIP-002-4 through CIP-009-4 provide a cyber security framework for the identification
Standard Development Timeline
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard is adopted by the NERC Board of Trustees (Board).
CIP Cyber Security Configuration Change Management and Vulnerability Assessments
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
CIP Cyber Security Personnel & Training
A. Introduction 1. Title: Cyber Security Personnel & Training 2. Number: CIP-004-6 3. Purpose: To minimize the risk against compromise that could lead to misoperation or instability in the Bulk Electric
Standard CIP Cyber Security Critical Cyber As s et Identification
A. Introduction 1. Title: Cyber Security Critical Cyber Asset Identification 2. Number: CIP-002-4 3. Purpose: NERC Standards CIP-002-4 through CIP-009-4 provide a cyber security framework for the identification
This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective.
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Description of Current Draft
CIP Cyber Security Configuration Change Management and Vulnerability Assessments
CIP 010 1 Cyber Security Configuration Change Management and Vulnerability Assessments A. Introduction 1. Title: Cyber Security Configuration Change Management and Vulnerability Assessments 2. Number:
Standard Development Timeline
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard is adopted by the NERC Board of Trustees (Board).
Summary of FERC Order No. 791
Summary of FERC Order No. 791 On November 22, 2013, the Federal Energy Regulatory Commission ( FERC or Commission ) issued Order No. 791 adopting a rule that approved Version 5 of the Critical Infrastructure
CIP Cyber Security Systems Security Management
A. Introduction 1. Title: Cyber Security System Security Management 2. Number: CIP-007-5 3. Purpose: To manage system security by specifying select technical, operational, and procedural requirements in
CIP Cyber Security Information Protection
A. Introduction 1. Title: Cyber Security Information Protection 2. Number: CIP-011-2 3. Purpose: To prevent unauthorized access to BES Cyber System Information by specifying information protection requirements
CIP Cyber Security Security Management Controls. A. Introduction
CIP-003-7 - Cyber Security Security Management Controls A. Introduction 1. Title: Cyber Security Security Management Controls 2. Number: CIP-003-7 3. Purpose: To specify consistent and sustainable security
requirements in a NERC or Regional Reliability Standard.
A. Introduction 1. Title: Cyber Security Information Protection 2. Number: CIP 011 1 3. Purpose: To prevent unauthorized access to BES Cyber System Information by specifying information protection requirements
CIP Cyber Security Physical Security of BES Cyber Systems
A. Introduction 1. Title: Cyber Security Physical Security of BES Cyber Systems 2. Number: CIP-006-5 3. Purpose: To manage physical access to BES Cyber Systems by specifying a physical security plan in
CIP Cyber Security Recovery Plans for BES Cyber Systems
A. Introduction 1. Title: Cyber Security Recovery Plans for BES Cyber Systems 2. Number: CIP-009-6 3. Purpose: To recover reliability functions performed by BES Cyber Systems by specifying recovery plan
CIP Cyber Security Personnel & Training
A. Introduction 1. Title: Cyber Security Personnel & Training 2. Number: CIP-004-5.1 3. Purpose: To minimize the risk against compromise that could lead to misoperation or instability in the BES from individuals
Standard CIP 005 4a Cyber Security Electronic Security Perimeter(s)
A. Introduction 1. Title: Cyber Security Electronic Security Perimeter(s) 2. Number: CIP-005-4a 3. Purpose: Standard CIP-005-4a requires the identification and protection of the Electronic Security Perimeter(s)
Standard CIP 007 4a Cyber Security Systems Security Management
A. Introduction 1. Title: Cyber Security Systems Security Management 2. Number: CIP-007-4a 3. Purpose: Standard CIP-007-4 requires Responsible Entities to define methods, processes, and procedures for
CIP Cyber Security Recovery Plans for BES Cyber Systems
A. Introduction 1. Title: Cyber Security Recovery Plans for BES Cyber Systems 2. Number: CIP-009-5 3. Purpose: To recover reliability functions performed by BES Cyber Systems by specifying recovery plan
CIP Cyber Security Recovery Plans for BES Cyber Systems
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
1. SAR posted for comment on January 15, Standard Drafting Team appointed on January 29, 2014
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
A. Introduction 1. Title: 2. Number: 3. Purpose: 4. Applicability: 4.1. Functional Entities: Balancing Authority Distribution Provider
The Background, VRF/VSLs, and Guidelines and Technical Basis Sections have been removed for this informal posting. The Project 2016-02 is seeking comments around the concept of the Requirement/Measure
Standard Development Timeline
CIP-002-6 Cyber Security BES Cyber System Categorization Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the
CIP Cyber Security Electronic Security Perimeter(s)
A. Introduction 1. Title: Cyber Security Electronic Security Perimeter(s) 2. Number: CIP-005-5 3. Purpose: To manage electronic access to BES Cyber Systems by specifying a controlled Electronic Security
Standard CIP Cyber Security Incident Reporting and Response Planning
A. Introduction 1. Title: Cyber Security Incident Reporting and Response Planning 2. Number: CIP-008-4 3. Purpose: Standard CIP-008-4 ensures the identification, classification, response, and reporting
CIP Cyber Security Physical Security of BES Cyber Systems
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
CIP Cyber Security Configuration Change Management and Vulnerability AssessmentsManagement
The Background, VRF/VSLs, and Guidelines and Technical Basis Sections have been removed for this informal posting. The Project 2016-02 is seeking comments around the concept of the Requirement/Measure
This draft standard is being posted for an initial comment and ballot. The draft includes modifications to meet the directives of FERC Order No. 791.
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
CIP Cyber Security Security Management Controls
A. Introduction 1. Title: Cyber Security Security Management Controls 2. Number: CIP-003-6 3. Purpose: To specify consistent and sustainable security management controls that establish responsibility and
Standard CIP Cyber Security Security Management Controls
A. Introduction 1. Title: Cyber Security Security Management Controls 2. Number: CIP-003-4 3. Purpose: Standard CIP-003-4 requires that Responsible Entities have minimum security management controls in
Standard Development Timeline
CIP-002-6 Cyber Security BES Cyber System Categorization Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the
CIP Cyber Security Configuration Management and Vulnerability Assessments
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
Cyber Threats? How to Stop?
Cyber Threats? How to Stop? North American Grid Security Standards Jessica Bian, Director of Performance Analysis North American Electric Reliability Corporation AORC CIGRE Technical Meeting, September
Standard Development Timeline
CIP 003 7 Cyber Security Security Management Controls Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard
Standard CIP Cyber Security Systems Security Management
A. Introduction 1. Title: Cyber Security Systems Security Management 2. Number: CIP-007-4 3. Purpose: Standard CIP-007-4 requires Responsible Entities to define methods, processes, and procedures for securing
Standard CIP 007 3a Cyber Security Systems Security Management
A. Introduction 1. Title: Cyber Security Systems Security Management 2. Number: CIP-007-3a 3. Purpose: Standard CIP-007-3 requires Responsible Entities to define methods, processes, and procedures for
CIP Cyber Security Physical Security of BES Cyber Systems
A. Introduction 1. Title: Cyber Security Physical Security of BES Cyber Systems 2. Number: CIP-006-6 3. Purpose: To manage physical access to Bulk Electric System (BES) Cyber Systems by specifying a physical
CIP Cyber Security Security Management Controls. Standard Development Timeline
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
A. Introduction. Page 1 of 22
The Background, VRF/VSLs, and Guidelines and Technical Basis Sections have been removed for this informal posting. The Project 2016-02 is seeking comments around the concept of the Requirement/Measure
Standard Development Timeline
CIP-003-67(i) - Cyber Security Security Management Controls Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when
Lesson Learned CIP Version 5 Transition Program CIP : Communications and Networking Cyber Assets Version: October 6, 2015
Lesson Learned CIP Version 5 Transition Program CIP-002-5.1: Communications and Networking Cyber Assets Version: October 6, 2015 Authorized by the Standards Committee on October 29, 2015 for posting as
Standard Development Timeline
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Description of Current Draft
requirements in a NERC or Regional Reliability Standard.
CIP 002 5.1 Cyber Security BES Cyber System Categorization A. Introduction 1. Title: Cyber Security BES Cyber System Categorization 2. Number: CIP 002 5.1 3. Purpose: To identify and categorize BES Cyber
Standard Development Timeline
CIP-008-6 Incident Reporting and Response Planning Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard
Additional 45-Day Comment Period September Final Ballot is Conducted October/November Board of Trustees (Board) Adoption November 2014
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
Frequently Asked Questions November 25, 2014 CIP Version 5 Standards
Frequently Asked Questions November 25, 2014 CIP Version 5 Standards This document provides answers to questions asked by entities as they transition to the CIP Version 5 Standards. The questions are listed
Standard CIP Cyber Security Electronic Security Perimeter(s)
A. Introduction 1. Title: Cyber Security Electronic Security Perimeter(s) 2. Number: CIP-005-2 3. Purpose: Standard CIP-005-2 requires the identification and protection of the Electronic Security Perimeter(s)
Standard CIP 005 2a Cyber Security Electronic Security Perimeter(s)
A. Introduction 1. Title: Cyber Security Electronic Security Perimeter(s) 2. Number: CIP-005-2a 3. Purpose: Standard CIP-005-2 requires the identification and protection of the Electronic Security Perimeter(s)
1. SAR posted for comment on January 15, Standard Drafting Team appointed on January 29, 2014
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
CIP Cyber Security Systems Security Management
A. Introduction 1. Title: Cyber Security System Security Management 2. Number: CIP-007-6 3. Purpose: To manage system security by specifying select technical, operational, and procedural requirements in
CIP Cyber Security Incident Reporting and Response Planning
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
TOP-010-1(i) Real-time Reliability Monitoring and Analysis Capabilities
A. Introduction 1. Title: Real-time Reliability Monitoring and Analysis Capabilities 2. Number: TOP-010-1(i) 3. Purpose: Establish requirements for Real-time monitoring and analysis capabilities to support
Purpose. ERO Enterprise-Endorsed Implementation Guidance
Lesson Learned CIP Version 5 Transition Program CIP-002-5.1 Requirement R1: Impact Rating of Generation Resource Shared BES Cyber Systems Version: January 29, 2015 Authorized by the Standards Committee
A. Introduction. B. Requirements and Measures
A. Introduction 1. Title: Communications 2. Number: COM-001-3 3. Purpose: To establish Communication capabilities necessary to maintain reliability. 4. Applicability: 4.1. Functional Entities: 4.1.1. Transmission
New Brunswick 2018 Annual Implementation Plan Version 1
New Brunswick Energy and Utilities Board Reliability Standards, Compliance and Enforcement Program New Brunswick 2018 Annual Implementation Plan Version 1 December 28, 2017 Table of Contents Version History...
Additional 45-Day Comment Period and Ballot November Final Ballot is Conducted January Board of Trustees (Board) Adoption February 2015
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
Reliability Standard Audit Worksheet 1
Reliability Standard Audit Worksheet 1 CIP-002-5.1 Cyber Security BES Cyber System Categorization This section to be completed by the Compliance Enforcement Authority. Audit ID: Registered Entity: NCR
Standard Development Timeline
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard is adopted by the NERC Board of Trustees (Board).
Standard CIP Cyber Security Physical Security
A. Introduction 1. Title: Cyber Security Physical Security of Critical Cyber Assets 2. Number: CIP-006-3 3. Purpose: Standard CIP-006-3 is intended to ensure the implementation of a physical security program
CIP Information Protection
CIP-011-2 Information Protection Wayne Lewis 3/25/15 3/25/2015 1 Information Protection CIP-011-2 Purpose To prevent unauthorized access to BES Cyber System Information by specifying information protection
Standard CIP Cyber Security Systems Security Management
A. Introduction 1. Title: Cyber Security Systems Security Management 2. Number: CIP-007-1 3. Purpose: Standard CIP-007 requires Responsible Entities to define methods, processes, and procedures for securing
Implementation Plan. Project CIP Version 5 Revisions. January 23, 2015
Implementation Plan Project 2014-02 CIP Version 5 Revisions January 23, 2015 This Implementation Plan for the Reliability Standards developed as part of Project 2014-02 CIP Version 5 Revisions replaces
2017 MRO Performance Areas and an Update on Inherent Risk Assessments
MIDWEST RELIABILITY ORGANIZATION 2017 MRO Performance Areas and an Update on Inherent Risk Assessments Adam Flink, Risk Assessment and Mitigation Engineer November 16, 2016 Improving RELIABILITY and mitigating
Implementation Plan. Project CIP Version 5 Revisions 1. January 23, 2015
Implementation Plan Project 2014-02 CIP Version 5 Revisions January 23, 2015 This Implementation Plan for the Reliability Standards developed as part of Project 2014 02 CIP Version 5 Revisions replaces
Standard INT Dynamic Transfers
A. Introduction 1. Title: Dynamic Transfers 2. Number: INT-004-3 3. Purpose: To ensure Dynamic Schedules and Pseudo-Ties are communicated and accounted for appropriately in congestion management procedures.
Standard CIP-006-4c Cyber Security Physical Security
A. Introduction 1. Title: Cyber Security Physical Security of Critical Cyber Assets 2. Number: CIP-006-4c 3. Purpose: Standard CIP-006-4c is intended to ensure the implementation of a physical security
Consideration of Issues and Directives Federal Energy Regulatory Commission Order No. 791 June 2, 2014
Federal Energy Regulatory Commission Order No. 791 June 2, 2014 67 and 76 67. For the reasons discussed below, the Commission concludes that the identify, assess, and correct language, as currently proposed
Standard INT Dynamic Transfers
Standard INT-004-3.1 Dynamic Transfers A. Introduction 1. Title: Dynamic Transfers 2. Number: INT-004-3.1 3. Purpose: To ensure Dynamic Schedules and Pseudo-Ties are communicated and accounted for appropriately
CIP Cyber Security Physical Security of BES Cyber Systems
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
Critical Infrastructure Protection (CIP) Version 5 Revisions. Standard Drafting Team Update Industry Webinar September 19, 2014
Critical Infrastructure Protection (CIP) Version 5 Revisions Standard Drafting Team Update Industry Webinar September 19, 2014 Administrative Items NERC Antitrust Guidelines It is NERC s policy and practice
Consideration of Issues and Directives Federal Energy Regulatory Commission Order No. 791 January 23, 2015
Federal Energy Regulatory Commission Order No. 791 January 23, 2015 67 and 76 67. For the reasons discussed below, the Commission concludes that the identify, assess, and correct language, as currently
November 9, Revisions to the Violation Risk Factors for Reliability Standards IRO and TOP
!! November 9, 2016 VIA ELECTRONIC FILING Jim Crone Director, Energy Division Manitoba Innovation, Energy and Mines 1200-155 Carlton Street Winnipeg MB R3C 3H8 RE: Revisions to the Violation Risk Factors
Standard CIP Cyber Security Electronic Security Perimeter(s)
A. Introduction 1. Title: Cyber Security Electronic Security Perimeter(s) 2. Number: CIP-005-1 3. Purpose: Standard CIP-005 requires the identification and protection of the Electronic Security Perimeter(s)
Standard CIP-006-3c Cyber Security Physical Security
A. Introduction 1. Title: Cyber Security Physical Security of Critical Cyber Assets 2. Number: CIP-006-3c 3. Purpose: Standard CIP-006-3 is intended to ensure the implementation of a physical security
Reliability Standard Audit Worksheet 1
Reliability Standard Audit Worksheet 1 CIP-012-1 Cyber Security Communications between Control Centers This section to be completed by the Compliance Enforcement Authority. Audit ID: Registered Entity:
Standard CIP Cyber Security Critical Cyber Asset Identification
Standard CIP 002 1 Cyber Security Critical Cyber Asset Identification Standard Development Roadmap This section is maintained by the drafting team during the development of the standard and will be removed
Standard CIP Cyber Security Critical Cyber Asset Identification
Standard CIP 002 1 Cyber Security Critical Cyber Asset Identification Standard Development Roadmap This section is maintained by the drafting team during the development of the standard and will be removed
Standards Authorization Request Form
Standards Authorization Request Form When completed, email this form to: sarcomm@nerc.com NERC welcomes suggestions to improve the reliability of the bulk power system through improved reliability standards.
5. Effective Date: The first day of the first calendar quarter after applicable regulatory approval.
Introduction 1. Title: IROL and SOL Mitigation in the ERCOT Region 2. Number: IRO-006-TRE-1 3. Purpose: To provide and execute transmission loading relief procedures that can be used to mitigate SOL or
Draft CIP Standards Version 5
Draft CIP Standards Version 5 Technical Webinar Part 1 Project 2008-06 Cyber Security Order 706 Standards Drafting Team November 15, 2011 Agenda Opening Remarks John Lim, Consolidated Edison, Chair V5
Standard TOP Transmission Operations
A. Introduction 1. Title: Transmission Operations 2. Number: TOP-001-34 3. Purpose: To prevent instability, uncontrolled separation, or Cascading outages that adversely impact the reliability of the Interconnection
Project Retirement of Reliability Standard Requirements
Project 2013-02 Retirement of Reliability Standard Requirements Unofficial Comment Form for Paragraph 81 (P81) Project Retirement of Reliability Standard Requirements This form is provided in a Word format
ERO Enterprise Registration Practice Guide: Distribution Provider directly connected Determinations Version 2: July 5, 2018
ERO Enterprise Registration Practice Guide: Distribution Provider directly connected Determinations Version 2: July 5, 2018 Purpose The purpose of this Practice Guide is provide a reference to be used
Standard CIP 004 3a Cyber Security Personnel and Training
A. Introduction 1. Title: Cyber Security Personnel & Training 2. Number: CIP-004-3a 3. Purpose: Standard CIP-004-3 requires that personnel having authorized cyber or authorized unescorted physical access
CIP V5 Implementation Study SMUD s Experience
CIP V5 Implementation Study SMUD s Experience Tim Kelley October 16, 2014 Powering forward. Together. SMUD Fast Facts General Information SMUD employs approximately 2,000 individuals Service area of 900
primary Control Center, for the exchange of Real-time data with its Balancing
A. Introduction 1. Title: Reliability Coordination Monitoring and Analysis 2. Number: IRO-002-5 3. Purpose: To provide System Operators with the capabilities necessary to monitor and analyze data needed
This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective.
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
Supply Chain Cybersecurity Risk Management Standards. Technical Conference November 10, 2016
Supply Chain Cybersecurity Risk Management Standards Technical Conference November 10, 2016 Agenda Opening remarks Review conference objectives and ground rules Standards project overview Discuss draft
Violation Risk Factor and Violation Severity Level Justifications Project Modifications to CIP Standards
Violation Risk Factor and Violation Severity Level Justifications Project 2016-02 Modifications to CIP Standards This document provides the standard drafting team s (SDT s) justification for assignment
Lesson Learned CIP Version 5 Transition Program
Lesson Learned CIP Version 5 Transition Program CIP-002-5: BES Cyber Assets Version: December 7, 2015 This document is designed to convey lessons learned from NERC s various CIP version 5 transition activities.
Violation Risk Factor and Violation Severity Level Justification Project Modifications to CIP-008 Cyber Security Incident Reporting
Violation Risk Factor and Justification Project 2018-02 Modifications to CIP-008 Cyber Security Incident Reporting This document provides the standard drafting team s (SDT s) justification for assignment
CIP Cyber Security Critical Cyber Asset Identification. Rationale and Implementation Reference Document
CIP-002-4 Cyber Security Critical Cyber Asset Identification Rationale and Implementation Reference Document NERC Cyber Security Standards Drafting Team for Order 706 December 2010 This document provides
Standard Development Timeline
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Description of Current Draft
Standard COM Communication and Coordination
A. Introduction 1. Title: Communication and Coordination 2. Number: COM-002-3 3. Purpose: To ensure Emergency communications between operating personnel are effective. 4. Applicability 4.1. Reliability
Title. Critical Infrastructure Protection Getting Low with a Touch of Medium. CanWEA Operations and Maintenance Summit 2018.
Critical Infrastructure Protection Getting Low with a Touch of Medium Title CanWEA Operations and Maintenance Summit 2018 January 30, 2018 George E. Brown Compliance Manager Acciona Wind Energy Canada
NERC-Led Technical Conferences
NERC-Led Technical Conferences NERC s Headquarters Atlanta, GA Tuesday, January 21, 2014 Sheraton Phoenix Downtown Phoenix, AZ Thursday, January 23, 2014 Administrative Items NERC Antitrust Guidelines
DRAFT. Cyber Security Communications between Control Centers. March May Technical Rationale and Justification for Reliability Standard CIP-012-1
DRAFT Cyber Security Communications between Control Centers Technical Rationale and Justification for Reliability Standard CIP-012-1 March May 2018 NERC Report Title Report Date I Table of Contents Preface...