M-APR-Seminar: Schedule for January 20th, 2017

Transcription

1 Organizer: Prof. Dr. Wolfgang Schlüter (Hochschule Ansbach) Content 1. PARTICIPANTS OVERVIEW SESSIONS... 4 Optical and Communication Networks (only A.M.)... 4 Materials and Manufacturing (A.M.)... 5 Materials and Manufacturing (P.M.)... 6 (A.M.)... 7 (P.M.)... 7 Power I (A.M.)... 8 Power I (P.M.)... 9 Power II (A.M.) Power II (P.M.) Robotics (A.M.) Robotics (P.M.) Car- (A.M.) Car- (P.M.) Software Engineering I (A.M.) Software Engineering I (P.M.) Software Engineering II (only A.M.) Logistics and Organization (only P.M.) POSTER- Logistics and Organization / Power (A.M.) POSTER- Car (A.M.) POSTER- Robotics / Software Engineering (P.M.) POSTER- / Materials and Manufacturing / Optical and Communication Networks (P.M.) LOCATIONS

2 1. PARTICIPANTS Hochschule Amberg-Weiden: 16 Hochschule Ansbach: 6 Hochschule Augsburg: 20 Hochschule Deggendorf: 16 Hochschule Ingolstadt: 18 Hochschule München: 11 Hochschule Nürnberg: 24 Hochschule Regensburg: 73 Sum: 184 2

3 Detaillierte Zeitpläne siehe nachfolgende Session-Pläne M-APR-Seminar: Schedule for January 20th, OVERVIEW 8 : : 3 0 Check-In für alle Teilnehmer: Aushändigung der Teilnehmerunterlagen: Antestate, Namenschilder und Gutscheine für Kaffee, Brezen & Kuchen Room: Room: Room: Room: Room: Optical and Communication Networks Materials and Manufacturing Power I Power II Chairman: Prof. Uhl Chairman: Prof. Walter Chairman: Prof. Kirchhöfer Chairman: Prof. Rosenbauer Chairman: Prof. Pröbstle Room: Room: Room: /28 Room: /31 9 : : 3 0 Robotics Car Software Engineering I Software Engineering II Chairman: Hr. Seifert Chairman: Hr. Zacharias Chairman: Prof. Moog Chairm.: Prof. Müller-Feuerstein Room: 70 EG-POSTER-Session Room: 70 OG-POSTER-Session Power Logistics and Organization Car Chairman: Prof. Schlüter Chairman: Prof. Sover 1 2 : : 3 0 Mittagspause Room: Room: Room: Room: Materials and Manu-facturing Power I Power II Chairman: Prof. Walter Chairman: Prof. Kirchhöfer Chairman: Prof. Rosenbauer Chairman: Prof. Pröbstle Room: Room: Room: /28 Room: / : : 4 5 Robotics Car Software Engineering I Logistics and Organization Chairman: Hr. Seifert Chairman: Hr. Zacharias Chairman: Prof. Moog Chairm: Prof. Müller-Feuerstein Room: 70 EG-POSTER-Session Materials and Manufac. Techn/ / Optical. and Communication Networks Chairman: Prof. Sover Room: 70 OG-POSTER-Session Robotics / Software Engineering Chairman: Prof. Schlüter 1 5 : : 0 0 Check-Out für alle Teilnehmer: Rückgabe der Antestate 3

4 3. SESSIONS Optical and Communication Networks (only A.M.) TIME: 9:30-11:30 LOCATION: CHAIRMAN: Prof. Dr. Christian Uhl 9 : : : : :10-10:25 10:30-10:45 10:50-11:05 11:10-11:25 Cornelia Ozga Nürnberg Concepts for LED light mixing for advanced lightening applications Christian Billig Deggendorf Time-Sensitive Networking in industrial and automotive systems Maximilian Hasenberger Deggendorf CUBS - CMUT based sensors Daniel Möllenbeck Deggendorf Glass for light converting systems by usage of collective LED modules Andreas Popp Deggendorf Specification and Design of an Appropriate Honeynet System Robert Schneider Deggendorf Removal simulation and tool parameterization 4

5 Materials and Manufacturing (A.M.) TIME: 9:30-12:30 LOCATION: CHAIRMAN: Prof. Dr.-Ing. Michael S. J. Walter 9 : : : : :10-10:25 10:30-10:45 10:50-11:05 11:10-11:25 11:30-11:45 11:50-12:05 12:10-12:25 David Fichtner Nürnberg Production of metallic Prototypes by the combined use of Stereolithography and Investment Casting Marius Kaspers Amberg/Weid. rapid test for DNA analysis at the crime scene Dominik Will Amberg/Weid. Laser structuring of plastics mold steels Roman Sammer Deggendorf RF Structures on Organic Circuit Boards in the Millimeter Wave Frequency Range Sebastian Wittmann Regensburg Optical Separation of stress and doping in Graphene membranes via Raman Spectroscopy Sebastian Malz Regensburg Concrete Moisture Simulation Model Michael Mayer Regensburg Implementing of a folding and crimping machine for coronary SDS Friedrich Muehlenberg Regensburg Commissioning of a test stand for induction of artificial vascular injuries Sven Steinmann Regensburg Simulation of Impact Damage in Fiber Reinforced Plastic with a Discrete Cohesive Failure Model 5

6 Materials and Manufacturing (P.M.) TIME: 13:30-16:45 LOCATION: CHAIRMAN: Prof. Dr.-Ing. Michael S. J. Walter 13:30 13:45 13:50 14:05 14:10 14:25 14:30 14:45 14:50 15:05 15:10 15:25 15:30 15:45 15:45 16:00 16:05 16:20 16:25 16:40 Thomas Simson Amberg/Weid. Laser postprocessing of selective laser melted surfaces Raphael Wagensonner Deggendorf Thermal membrane distillation Maximilian Dittmer Regensburg Fabrication of measuring glasses for determination of concentrations in suspensions Maximilian Faber Regensburg Numerical simulation of multi-row bolted joints on composite tubes under bending load Sebastian Hederer Regensburg Numerical and experimental determination of the failure curve of the dual phase steel DP800 Fabian Koch Regensburg Model Setup and FE-simulation of a forming tool component Kaffeepause Matthias Laub Regensburg Laser Cutting of Coronary Stents Magdalena Gasteiger Nürnberg Method of preparing standard samples of Aluminum and Iron for chemical analysis with Optical Emission Spectrometer Julia Hoppe Nürnberg Origin of sodium ions in fogging films of showcase glasses 6

7 (A.M.) TIME: 9:30-11:50 LOCATION: CHAIRMAN: Prof. Dr.-Ing. Hermann Kirchhöfer 9 : : : : :10-10:25 10:30-10:45 10:50-11:05 11:10-11:25 11:30-11:45 Michael Hoerner Nürnberg Parameter identification of a permanent magnet synchronous motor Armin Becher Ingolstadt Novel Approach to Measure Varying Motion-to-Photon Latency in Distributed VR-Systems Barbora Blahnikova Regensburg Multilyzer - Microfluidic Online Mesauring System for the Analysis of Environmentally Relevant Substances Dominik Jungtaeubl Regensburg Influence of psychosocial stress on the biomechanical system Mischa Mühling Regensburg Adapting a shoulder complex to a musculoskeletal force dependent kinematics thorax model Johannes Reschke Regensburg Implementation of a Steered Response Power Acoustic Camera Martin Peterlik Deggendorf Influence of Analog-Digital-Conversion and Algorithm on Signal-to-Noise-Ratio in a Laser-Range- Finding System (P.M.) TIME: 13:30-15:10 LOCATION: CHAIRMAN: Prof. Dr.-Ing. Hermann Kirchhöfer 13:30 13:45 13:50 14:05 14:10 14:25 14:30 14:45 14:50 15:05 Veronika Rembart Deggendorf Sensory determination of the insetting birth process by breeding sows Johann Weiß Deggendorf Investigation and Evaluation of Different Approaches to Optimize the Selectivity of a Metal Detector Bilal Vana Regensburg Development of a Gas Sample Vale for determining the composition of the Chamber Gas in a Combustion Engine - Part 5: Prototype experiments Andreas Zagler Regensburg Development of a sound detector device for photoacoustic spectroscopy Dominik Müller Ingolstadt Development of a Thermal Impedance Equipment for Reliability Analysis of High Power Semiconductors. 7

8 Power I (A.M.) TIME: 9:30-12:30 LOCATION: CHAIRMAN: Prof. Dr.-Ing. Georg Rosenbauer 9 : : : : :10-10:25 10:30-10:45 10:50-11:05 11:10-11:25 11:30-11:45 11:50-12:05 12:10-12:25 Sebastian Mathes Nürnberg Active vibration damping of electrical machines on elastic steel frame foundations Michael Heberl Regensburg Electrochemical reduction of CO2 on silver nanowire catalysts Reinhard Kreuzer Regensburg Re-parameterization of reactive power characteristics of distributed generation to relieve the substation transformer Ulrike Mayer Regensburg Conflict analysis of the supply of control energy from the distribution grid with regard to grid safety management Johannes Reinl Regensburg Independent Power-to-Gas Bettina Vogl Regensburg A study of reactive power management in the electrical grid of Austria Michael Fischer Augsburg Transient Simulation Model of Biomass Power Plants in an Isolated Grid Matthias Hiermeier Ingolstadt technique to determine the impedance of automotive energy nets for stability analysis purpose based on a floating capacitor H-bridge converter Nico Schmied München First prototype of a bidirectional DC/DC converter for coupling of traction HV-batteries 8

9 Power I (P.M.) TIME: 13:30-15:30 LOCATION: CHAIRMAN: Prof. Dr.-Ing. Georg Rosenbauer 13:30 13:45 Jegor Kern Amberg/ Weiden Optimization of a micro-chp system regarding the thermodynamic and commercial specifications 13:50 14:05 14:10 14:25 14:30 14:45 14:50 15:05 15:10 15:25 Markus Lang Ingolstadt A new Technology for fast switching of SiC MOSFETs Julia Abb Regensburg Single and dual source supplied lithium bromide heat transformers Albert Biber Regensburg Optimization of a Carbon Dioxide Refrigeration Cycle Tobias Schindler Nürnberg Model Based Control Design for SoCs Klaus Seibold Nürnberg Design of a test station to investigate flue gas condensation 9

10 Power II (A.M.) TIME: 9:30-12:30 LOCATION: CHAIRMAN: Prof. Dr. Günther Pröbstle 9 : : : : :10-10:25 10:30-10:45 10:50-11:05 11:10-11:25 11:30-11:45 11:50-12:05 12:10-12:25 Barbara Plura Augsburg Economic evaluation of the utilized flexibility of a Smart Grid Fabian Junker Ingolstadt Electricity Load Forecasting for Rural Settlements within Southern Africa to Optimize Off-Grid Microgrids Dirk Schneider Nürnberg and Modelling of the Heat Transfer in Smooth and Corrugated Tubes Tobias Wolf Nürnberg Sensorless pressure control in inverter-driven pump plants with model-based state estimation Thilo Hoffmann Regensburg Direct integration of an ORC-system in an internal combustion engine Florian Lesch Regensburg Organic Rankine Cycle Christopher Mühlbauer Regensburg Preparatory examinationes for the evidence of a grid-conducive reactive power call from company`s compensation systems in a field test Tobias Sator Regensburg Utilisation of RONTs to enable reactive power supply in a distribution grid Florian Zacherl Regensburg Investigation of different pre-injection configurations and coking behaviour of a diesel engine fueled with straight vegetable oils 10

11 Power II (P.M.) TIME: 13:30-15:30 LOCATION: CHAIRMAN: Prof. Dr. Günther Pröbstle 13:30 13:45 Julius Seidler Amberg/ Weiden Ignition trade-off in combustion engines: Current ignition systems caught between intensified ignition conditions and load limits 13:50 14:05 14:10 14:25 14:30 14:45 14:50 15:05 15:10 15:25 Robert Urbaneck Ingolstadt Occurrence of High Frequency Perturbation in Automotive Power-Supply Networks and the Impact in DC-DC Multi-Phase Converters Andreas Berling Regensburg Conception of the measurements and planned evaluations for the low voltage reconstruction Eugen Gribel Regensburg Commissioning and optimization of a Stirling Engine Steffen Keilbach Nürnberg Testing and adjusting a MPP tracking DC/DC converter for a PV application Lukas Rabenstein Nürnberg (Semi-) analytically calculation of eddy current losses in permanent magnet synchronous motors 11

12 Robotics (A.M.) TIME: 9:30-11:30 LOCATION: CHAIRMAN: M. Sc. Bastian Seifert 9 : : : : :10-10:25 10:30-10:45 10:50-11:05 11:10-11:25 Tobias Fink Nürnberg Using a Signed Distance Function Map Representation for a Probability Based 2D Scan Registration Approach Johanna Gleichauf Nürnberg Sensor Fusion of a 2D Laser Scanner and a Thermal Camera for Robust Localisation Franz Haubner Regensburg Smart Workbench: Basic Concept for Reactions to adapt a Collaborative Lightweight Robot to his Current Scene Michael Feustle Augsburg Determination of contact forces of a tool safety device for the human robot collaboration Andreas Vogl Deggendorf Localisation of an Automated Guided Vehicle Florian Kasper Ingolstadt Force Control in Robotics to Develop Advanced Fields of Application Robotics (P.M.) TIME: 13:30-14:50 LOCATION: CHAIRMAN: M. Sc. Bastian Seifert 13:30 13:45 13:50 14:05 14:10 14:25 14:30 14:45 Franziska Frenzel Nürnberg Intuitive human machine interface for multi robot systems Dominik Heigl Nürnberg Intuitive human machine interface for multi robot systems Michael Schneider Regensburg Modelling and Simulation of a 5-Axis milling machine with MODELICA for improving the trajectory management Tim Drouven Ingolstadt Hardware in the Loop Simulation for Micro Air Vehicle 12

13 Car- (A.M.) TIME: 9:30-12:30 LOCATION: CHAIRMAN: M. Sc. Konstantin Zacharias 9 : : : : :10-10:25 10:30-10:45 10:50-11:05 11:10-11:25 11:30-11:45 11:50-12:05 12:10-12:25 Johannes Rösler Nürnberg Development of an intelligent infrastructure and Car2X data transfer Christian Stahl Nürnberg Development of an autonomously driving interconnected vehicle Florian Schweiger Deggendorf DC fast charging station with intelligent load distribution Aaron Heinz Ingolstadt mixed reality driving simulation Sebastian Salich Ingolstadt Investigation of the Zero-Current Switched Class E Converters for automotive Wireless Power Transfer Inductive Charging Applications Matthias Niegl München Model-Based Steering ECU Application Using Offline Simulation (Software in the Loop) Johannes Morgenschweis Regensburg Comparative Study on Exhaust Gas Recirculation Methods for Passenger Car Diesel Engines Christopher Sittl Regensburg Acoustic Analysis of Combustion Engines Nils Weiß Regensburg Security research on connected cars 13

14 Car- (P.M.) TIME: 13:30-16:05 LOCATION: CHAIRMAN: M. Sc. Konstantin Zacharias 13:30 13:45 13:50 14:05 14:10 14:25 14:30 14:45 14:50 15:05 15:05 15:20 15:25 15:40 15:45 16:00 Stefan Stiegler Amberg/Weid. Implementation of an embedded platform with a 4G module for communication for electric vehicle Martin Schmidtner Augsburg Electromagnetic calculation of an permanent excited synchronous motor with Comsol Multiphyics Marcel Dietz Ingolstadt Optimization of the Voltage Stability in automotive Energy Net Voltage using Capacitors Jürgen Gebhard Regensburg Experimental investigations on urea processing in the combustion chamber within the scope of SCR-aftertreatment technology to reduce nitrogen oxide emissions Kaffeepause Sebastian Kestl Regensburg Model based control function for a dual stage turbocharged diesel engine Sebastian Kraust Regensburg A First Concept for Predicting Road Users in Urban Environments for Autonomous Vehicles Paul Mäule Regensburg Oil consumption measurement of gasoline engines 14

15 Software Engineering I (A.M.) TIME: 9:30-12:30 LOCATION: /28 CHAIRMAN: Prof. Dr. Mathias Moog 9 : : : : :10-10:25 10:30-10:45 10:50-11:05 11:10-11:25 11:30-11:45 11:50-12:05 12:10-12:25 Christian Neuberger Nürnberg R_Visualizer - Distributed Control System Visualization and Control TIm Oliver Mehling Augsburg Developing a Logical Architecture for Satellites based on CUBESAT attitude control system Fabian Weisshaar Augsburg A Cautious Look at Using Internet Standards-to-be in Research Work Peter Semmelbauer Deggendorf Implementation of a security concept for BACnet/IP Niklas Hehenkamp Ingolstadt Decrease of Response Time and Estimation of Speedup for Parallel Automotive Software Dominik Müller Ingolstadt Development of a Thermal Impedance Equipment for Reliability Analysis of High Power Semiconductors. Christina Obermaier Ingolstadt Challenges in Testing Multi-Hop Inter Vehicle Communication Maximilian Woerner München Security Analysis of IoT Platforms Sarah Symelka Regensburg Preprocessing Log Data for Anomaly Detection with SVMs 15

16 Software Engineering I (P.M.) TIME: 13:30-16:05 LOCATION: /28 CHAIRMAN: Prof. Dr. Mathias Moog 13:30 13:45 13:50 14:05 14:10 14:25 14:30 14:45 14:50 15:05 15:05 15:20 15:25 15:40 15:45 16:00 Benjamin Weigl Amberg/Weiden Performance Analysis of Lightweight Cryptographic Primitives on Automotive Embedded Controller Michael Mogk Augsburg Analysis of Malicious Software on IoT Devices Julian Sarcher Augsburg Applying an Iterative Refinement Approach to an Configurable Architecture for the Generalized Hough Transform Michael Okon Ingolstadt Potentials of Machine Learning in Production Context Kaffeepause Jihad Taha München The systematic and comprehensive development of an Assembly Assistant System. Patrick Sekler Nürnberg Implementing an R&I flowchart into a virtual model Alexander Zoellner Augsburg Memory access module and non-linear image transformation for ASTERICS 16

17 Software Engineering II (only A.M.) TIME: 9:30-12:30 LOCATION: /31 CHAIRMAN: Prof. Dr.-Ing. Sascha Müller-Feuerstein 9 : : : : 0 5 Florian Großmann Nürnberg Determination of suitable parameters for standard controllers in pump systems Florian Fischer Augsburg A risk map of the industrial IT-security in Germany 10:10-10:25 Katharina Madita Sophie Herpich Augsburg Personalizing Gamification in the e-health application CARE 10:30-10:45 10:50-11:05 11:10-11:25 11:30-11:45 11:50-12:05 12:10-12:25 Fabian König Augsburg Analysis of protocol-based attacks on industrial networks using the example of the S7-Protocol. Thomas Kristlbauer Deggendorf Evaluation of Real-time Systems on Microcontrollers Christoph Hartmann Ingolstadt Massive Parallelization of Real-World Automotive Real-Time Software on GPGPUs Leonhard Bielmeier München Analysis of internet user pseudonyms and possible relations to user behavior, using public meta information. Matthias Schreiner Regensburg Security in Smart Grids? developing a honeynet for control boxes Julian Rost Amberg/Weiden Design and Implementation of automated tests for the improvement of the code quality 17

18 Logistics and Organization (only P.M.) TIME: 13:30-15:30 LOCATION: /31 CHAIRMAN: Prof. Dr.-Ing. Sascha Müller-Feuerstein 13:30 13:45 13:50 14:05 14:10 14:25 14:30 14:45 14:50 15:05 15:10 15:25 Philipp Gruber Augsburg Controlling of Logistics Service Supplier Andreas Miller Augsburg Potential use of the industrial internet Stefan Rockinger Augsburg Business models of unicorn startups Lea-Alina Skorupa Augsburg Motivation of Employees in Logistic Sectors Lukas Burseg München Development and Implementation of a Model-Based Systems Engineering Approach for Mechatronic Systems Design in a Product-Lifecycle-Mangement Environment Thomas Rieger München Installation planning of an assembly line and implementation of smart sensor solutions 18

19 POSTER- Logistics and Organization / Power (A.M.) TIME: 9:30-12:30 LOCATION: 70 EG CHAIRMAN: Prof. Dr. Wolfgang Schlüter Vorname Nachname Hochschule Titel Logistics & Org. Sophie Bracks Regensburg Influence of Stochastics within Production Planning Katja Hampel Amberg/Weiden Proteins and high-valued Substances from Microorganisms Power Technolo. Michael Steiner Amberg/Weiden Exhaust Air Treatment using Biological Reaktors Power Technolo. Peter Stüber Amberg/Weiden Numerical simulation of spherical packed beds in thermal energy storages Power Technolo. Christian Habermeyer Ansbach Realization of a hardware in the loop direct current generator test bench Power Technolo. Sonja Baumgartner Augsburg Modelling of photovoltaic systems in an isolated grid using a transient simulation tool Power Technolo. Willy May Ingolstadt Automotive multi-phase dc-dc converter based on galium nitride (GaN) MOSFETs as switching devices Power Technolo. Annemarie Storch München Integration of a latent heat storage in a VRF- System Power Technolo. Felix Wange München Experimental investigation of geometric parameters at a solar chimney test rig Power Technolo. Daniel Both Nürnberg Evaluation of the "TI C2000 Concerto Support Package" for Simulink Power Technolo. Quoc Viet Bui Nürnberg Field Oriented Control of an Asynchronous Motor Power Technolo. Bastian Hackenberg Regensburg Operating parameters to optimize the packings of a trickle-bed-reactor Power Technolo. Justus Hofmeister Regensburg Surface Area Maximization and Area-Volume-Ratio Optimization of Trickle Bed Rector Packings in terms of Hydrogen Solubility for Biological Methanation Power Technolo. Anja Kaul Regensburg Investigations for optimisation of the trickle bed reactor process for biological methanation Power Technolo. Johannes Rauch Regensburg Analysis and identification of correlations between electrical quantities in a distribution grid Power Technolo. Kilian Rehorik Regensburg Flux model of an induction machine for field oriented control Power Technolo. Sandra Schmid Regensburg Heat and Moisture Monitoring at Haus Schminke by Hans Scharoun Power Technolo. Felix Senftl Regensburg Evaluation of Aptitude of Electrolyzers Power Technolo. Johannes Roßmann Regensburg Thermal Aging Behaviour of Distribution Transformers 19

20 POSTER- Car (A.M.) TIME: 9:30-12:30 LOCATION: 70 OG CHAIRMAN: Prof. Dr.-Ing. Alexandru Sover Vorname Nachname Hochschule Titel Car Philipp Heß Amberg/Weiden Development of a method for a passive evaluation of the throughput of a mobile connection Car Felix Reichenberger Amberg/Weiden Design and test of a voltage dc-link pre- and discharge system Car Sebastian Wieland Amberg/Weiden Special routing methods for electric vehicles Car Tiffany Haas Ansbach Battery Electric Vehicles (BEVs) - Increasing range by using renewable energies Car Tamara von Sawitzky Ingolstadt Augmented Reality Windshield Display-supported Assisted Driving and Passenger Entertainment Car Michael Rödig München State-of-the-Art analysis of automated Automotive Pentests Car Matthias Wagner München Exhaust gas analysis of an emission optimized direct-injected 2-stroke single cylinder research engine Car Thomas Wocheslander München Development of a lightweight optimized motorcycle frame for the Moto2 class Car Alexander Grimm Regensburg Development of a modular mechanical library for a powertrain of an electric vehicle with Modelica Car Johann Mieslinger Regensburg Synthesis gas test bench for development of exhaust aftertreatment systems Car Michael Mosandl Regensburg Development of a test bench for energetic verification of a central vehicle auxiliaries drive Car Johannes Schmalzl Regensburg PEMS² - basis Car Mathias Schoierer Regensburg Development an experimental infrastructure for the detection of the real power consumption in an electronic direct injection driver. Car Florian Werner Regensburg Conception and implementation of a software entity for the calculation of the optimal powertrain operating state for the 'Engine Management System 3' 20

21 POSTER- Robotics / Software Engineering (P.M.) TIME: 13:30-16:30 LOCATION: 70 OG CHAIRMAN: Prof. Dr. Wolfgang Schlüter Vorname Nachname Hochschule Titel Robotics Klajdo Fyraj Deggendorf An Augmented Reality approach for the interaction between a human and an automation process Robotics Dimitrij- Marian Holm München SLAM in dynamic Environments Robotics Andreas Linderer Regensburg Parameter identification of contact models for telerobotic systems Robotics Sandra Rochholz Regensburg Robust Detection of Human Hands based on Color and Depth Image Fusion for Human Machine Interaction Software Engineering Software Engineering Software Engineering Software Engineering Software Engineering Software Engineering Software Engineering Jakob Krieg Ansbach Software-based analysis and visualization of process data in melt and die casting industry Christian Fischer Augsburg Challenges in the development of mobile multimedial cross-platform apps Tobias Seel Augsburg Attacking Multipath TCP - Methods, Techniques and Mitigation Helmut Engelhardt Nürnberg Evaluation of a 3D mine shaft reconstruction method with 2D laser scans using forward projection and truncated signed distance function (TSDF). Robert Mendel Regensburg Barrett's Esophagus Analysis with Convolutional Neural Networks Mark Schatz Regensburg Security and privacy of user-related data in profoundly cross-linked and dynamic systems Michael Tahedl Regensburg Development of components for a 1-D-multiphysics simulation tool 21

22 POSTER- / Materials and Manufacturing / Optical and Communication Networks (P.M.) TIME: 13:30-16:30 LOCATION: 70 EG CHAIRMAN: Prof. Dr.-Ing. Alexandru Sover Vorname Nachname Hochschule Titel Rebecca Frank Ansbach Development of an experimental method to substitute fishmeal and -oil with insect meal in the diet of juvenile carp Florian Brendel Regensburg Concept and Structure of a Smart Meter Test Laboratory Wolfgang Ernst Ansbach Development of a concept for a test facility to determine the U- value of buildings envelope components Jens Wolf Ansbach Can potassium-additives solve the phosphorus-problem? - a thermo-chemical treatment of sewage sludge ash Christoph Winter Deggendorf High speed volumetric flow measurement in microchannels Jonas Busch Ingolstadt Planning of a thermodynamic hydraulic testing rig for heatpumps and heat exchangers Daniel Dzibela Regensburg An outline of hidden Markov model based speech enhancement Peter Gaida Regensburg Photoacoustic for trace gas sensing Martin Kerschensteiner Regensburg Motion sensors measurements processing and features extraction for a smart toothbrush Alexander Pilling Regensburg Determining psychological stress from physiological biosignals Florian Schröder Regensburg Development of a realistic, elastic heart model, including the near to the heart located blood vessels, for the investigation of the influence of artificial heart valves on the flow field in coronary arteries Anna Schwitalla Regensburg Development of an extended non-newtonian blood viscosity model for enhanced numerical flow simulations (CFD) in complex, multi-scale geometries 22

23 Materials and Manufacturing Materials and Manufacturing Materials and Manufacturing Materials and Manufacturing Materials and Manufacturing Kevin Schmitt Amberg/W. Alginite - A sedimentary rock with great potential Timo Bohmann Regensburg Analysis of the sound propagation in anisotropic materials Manuel Döring Regensburg Simulative examination of the movement curve of a pressing tool Lisa Obermaier Regensburg Establishing histologic method of PMMA embedding Nina Prem Regensburg Spectroscopic analysis of magneto-active polymers (MAP) Optical and Communication Networks Marco Reuter Amberg/Wei den Optimization of Laser Scanner Dynamics with Adaptive Signal Processing and Control Algorithms Optical and Communication Networks Optical and Communication Networks Arthur Holzner Augsburg Redundant connection of industrial systems with Multipath-TCP Kevin Urbanek Regensburg Flow analysis in patient-specific, realistic models of aneurysms to develop a prediction model for risk of rupture and for improved surgical planning 23

24 4. LOCATIONS Gebäude 51 Vortrag-Sessions Gebäude 70 Check In / Check Out Poster-Sessions Gebäude 92 Vortrag-Sessions 24