Additional Information about Using DS8000 with Non-IBM Software

Transcription

1 IBM System Storage DS8000 Series Independent Software Vendor (ISV) Matrix ISV Interoperability Last updated: Nov 17, 2008 The information in this matrix identifies products that have been demonstrated to interoperate with the designated DS8000 series product. It does not indicate that the subject products will work in every possible configuration. IBM plans to update the interoperability matrix on an ongoing basis as interoperability testing and certifications are completed. Additional Information about Using DS8000 with Non-IBM Software The information in this document describes those software configurations that were successfully tested by IBM and/or vendors. Not every product within a vendor s product line was tested and not every possible configuration was tested. It is also probable that an ISV product not listed or a configuration not identified will interoperate correctly. IBM does not warrant interoperability functionality or problem resolution of any listed product or of an unlisted product. IBM does not prohibit other vendor products from being used with IBM s DS8000 Series products. Removal of these software additions may be required for Product Support to provide problem determination and resolution of a DS8000 Hardware issue. Regardless of whether a software program is listed in this document, IBM does not support other vendors software therefore, IBM Product Support cannot provide telephone, on-site, or development lab support for vendors software. Likewise, IBM Product Support does not provide a single vendor interface for problem isolation and resolution for other vendors. For problems in the software that IBM ships pre-installed, IBM may work with IBM s software suppliers. IBM does not guarantee that all problems will be resolved. Also, IBM does not guarantee to resolve all problems in IBM-supplied products that only appear when other (bug-free) non-ibm hardware or software is also used. Customers should contact the corresponding vendor for related pre-sales and post-sales support issues, as Product Support can only assist on DS8000 Series specific items. Customers who desire a turnkey multi-vendor support solution should investigate an IBM Global Services multi-vendor support contract.

2 ISV Interoperability with the System Storage DS8000 Series ISV Product or Program RAC 10g R2 DS8000 Model Operating System AIX 5.3 Description of Deliverable URL si/fcgibin/ssialias?infotype=sa&subty pe=wh&appname=stg_ts_u SEN&htmlfid=TSW03024USE N&attachment=TSW03024USE N.PDF RAC 10g R2 RHEL 4.4 WP RAC 11g R1 WP R2 on RHEL4 R2 on RHEL 4.4 R2 on RHEL4.4 RHEL4.4 on Linux are System x3850, DS8000, and on Linux are System x3950, DS8000, and on Linux are System x3550, DS8000, and ::NO::P2_VC_ID:48 ::NO::P2_VC_ID:436 ::NO::P2_VC_ID:422

3 ISV Product or Program DS8000 Model Operating System Description of Deliverable URL ESRP ESRP Exchange Tivoli Storage Manager Exchange 2007 Tivoli Storage Manager Exchange 2007 backup and recovery with SVC and TSM Exchange Symantec Backup Exec 11d Exchange Veritas NetBackup 6.0 R2 SP2 Server 2008 Exchange Solution Reviewed Program guide Exchange Solution Reviewed Program guide Installation and Configuration Guide Installation and Configuration Guide Backup and Recovery guide with SVC and TSM - Best Practices cookbook Configuration and Best Practices -us/exchange/bb aspx 03.ibm.com/support/techdocs/a tsmastr.nsf/webindex/wp docs/atsmastr.nsf/webindex/w P WP WP WP WP si/fcgibin/ssialias?infotype=sa&subty pe=wh&appname=stg_ts_u SEN&htmlfid=TSW03003USE N&attachment=TSW03003USE N.PDF

4 Additional ISV Solutions Utilizing IBM System Storage DS8000 Real Application Clusters (RAC) databases 1. Leveraging DS8000 Advanced Copy Services for User-Managed Backup and Recovery RAC 10g g R2 with Automatic Storage Management and IBM System Storage FlashCopy Backup and Recovery Procedures 3. Deploying an RAC 10g Database on AIX 5.3 with an IBM DS8000 and DS6000 Storage Subsystem EN&attachment=TSW03024USEN.PDF 4. Deploying RAC 10g and 11g on Red Hat Enterprise Linux with DS Guidelines for using IBM TotalStorage DS8000 Series for Database Disaster Recovery using Global Mirror ftp://service.boulder.ibm.com/storage/disk/dsfamilyasync_oscp.pdf 6. Guidelines for using IBM TotalStorage DS8000 Series for Database Disaster Recovery using Metro Mirror function 7. Guidelines for using IBM TotalStorage DS8000 Series for Database snapshot using the FlashCopy Advance Function 1. Technical Solutions Guide: Installation and Configuration guide for implementing a Exchange Server VSS-based Backup & Recovery solution on IBM System Storage DS8000 and DS6000 using Tivoli Storage Manager 2. Technical Solutions Guide: Installation and Configuration guide for implementing a Exchange Server 2007 SP1 VSS-based Backup & Recovery solution on IBM System Storage DS8000, DS6000, and DS4000 using Tivoli Storage Manager

5 3. Technical Solutions Guide: Best practice cookbook for implementing a clustered Exchange Server VSS-based Backup and Recovery solution on IBM System Storage DS8000 and DS6000 using Symantec Backup Exec 11d 4. Technical Solutions Guide: Configuration and Best Practices guide for implementing a Exchange Server VSS-based Backup & Restore solution on IBM System Storage DS8000 and DS6000 using Symantec NetBackup EN&attachment=TSW03003USEN.PDF 5. Exchange 2007 Backup/Recovery Guide with SVC and Tivoli Storage Manager: Exchange 2007 backup & recovery guide with virtualized storage using Server 2008 with TSM on IBM System Storage DS4800,, and SVC Exchange 2007 SP1 ESRP: ESRP Exchange 2007 SP1 w/svc & 1GB size. Symantec Veritas Storage Foundation and High Availability Solutions from Symantec Corp. have been tested and are demonstrated to interoperate with DS8000 series products. See the platform specific sections of the DS8000 Interoperability Matrix for details of specific Veritas products (VxVM & VCS) used in these qualifications. See the "IBM System Storage and Symantec" page at for more information.