Port Replicator User s Guide

Transcription

1 Fujitsu Computer Systems Corporation Port Replicator User s Guide FPCPR87AP / FPCPR88AP / FPCPR89AP This user s guide contains information on your port replicator with your Fujitsu LifeBook. We strongly recommend that you read this guide before using the port replicator even if you are already familiar with such accessories. This user s guide is applicable to three different models, with differences noted as follows: FPCPR87AP: Port Replicator FPCPR88AP: Port Replicator with Dual-Layer Multi- Format DVD Writer FPCPR89AP: Port Replicator with DVD/CD-RW Combo Drive Device Ports/Connectors on the Port Replicator The port replicator extends the functionality of your Life- Book by providing the following ports: Four USB 2.0 ports One 15-pin D-SUB connector for external monitor One LAN (RJ-45) port One DC-in connector One DVI-D connector One headphone connector One docking connector The port replicator connects to the bottom of the notebook. 1

2 DC Power Jack USB Ports LAN Connector Security Lock Slot External Monitor Docking Connector Connector Headphone Jack DVI-D Connector Optional Optical Drive Figure 1. Port Replicator - Rear and Left Side Docking Connector Suspend/ Resume Button Air Vents Latch Release with Security Lock Slot Figure 2. Port Replicator - Front and Right Side 2

3 REAR PANEL/LEFT SIDE COMPONENTS The following is a brief description of the port replicator s rear and left side components. (Figure 1) DC Power Jack The DC power jack allows you to plug in the AC adapter or the optional Auto/Airline adapter to power your notebook. USB Ports There are four USB 2.0 ports on the port replicator. USB 2.0 ports let you connect any USB 2.0 device for up to 480 Mbps transfer rate. USB 2.0 is backward-compatible with USB 1.1. LAN (RJ-45) Jack The LAN port lets you connect an RJ-45 cable. Note that when your notebook is connected to the port replicator, the LAN port on the system is not accessible; the port replicator LAN port is the only one that can be used when attached to the system. External Monitor Port The external monitor port allows you to connect an external VGA or SVGA CRT monitor. Digital Video Interface (DVI-D) The DVI-D port allows you to connect a flat-panel LCD monitor or television that is equipped with a DVI-D port for ultra-crisp digital images and graphics. Headphone Jack The headphone jack allows you to connect headphones to your notebook. 3

4 Optical Drive (on select models) On the left-hand side of the port replicator -- depending upon which model of port replicator you purchased -- there may be a fixed optical drive. If you have an optical drive installed, see the instructions contained in Using the optional optical drive on page 8. FRONT/RIGHT SIDE COMPONENTS The following is a brief description of the port replicator s front and right side components. (Figure 2) Docking Connector The docking connector mates with the connector on the bottom of the LifeBook to connect the two electronically. Suspend/Resume Button The power on/suspend/resume button allows you to suspend/resume your system via the port replicator. Latch Release with Security Lock Slot The latch release is used to release the system from the port replicator. The security lock slot allows you to secure the port replicator with an optional security lock/cable. When the system is installed in the port replicator, the slot secures both. 4

5 Air Vents Air vents are used to cool the system to prevent overheating. To protect your notebook and/or port replicator from damage and to optimize performance, be sure to keep all air all vents unobstructed, clean, and clear of debris. This may require periodic cleaning, depending upon the environment in which the system is used. Do not operate the notebook in areas where the air vents can be obstructed, such as in tight enclosures or on soft surfaces like a bed. ATTACHING THE PORT REPLICATOR The port replicator can be attached to your notebook while the power is on, while in suspend mode, or while the power is off. The AC adapter must be plugged into the port replicator in order to use all of the ports. If the adapter is connected to the system, several of the port replicator ports will not be usable. 1. Unplug the AC adapter from the system if it is connected and any other connectors that are attached to the back of the system. 5

6 Press points Docking connector Figure 3. Attaching the Port Replicator 2. Position the system so that the docking connector on the bottom of the system is aligned with the docking connector on the port replicator (Figure 3). 3. Push your notebook down at the two press points indicated in Figure 3 to connect it securely to the port replicator. 4. Plug the AC adapter into the DC power jack on the port replicator and plug the other end into a power outlet. Attach any peripheral devices to the port replicator. 6

7 DETACHING THE PORT REPLICATOR The port replicator can be detached from your notebook while the power is on, while in suspend mode, or while the power is off. To detach the port replicator follow these steps: 1. Pull the port replicator latch release outwards (Figure 4). 2. While holding the port replicator latch release, lift your notebook to detach it from the port replicator. Figure 4. Detaching the notebook 7

8 USING THE OPTIONAL OPTICAL DRIVE Depending upon which model of port replicator you purchased, it may have a built-in optical drive. 8 Optical Drive Tray Figure 5. Optical Drive Location Emergency Tray Release Drive Tray Release Button There is a variety of media available to use with your system, depending upon the port replicator configuration you have selected. Multi-Format DVD Writers and DVD/CD-RW Combo drives are collectively known as optical drives. DVD-R/DVD-RW discs hold up to 4.7 GB of data (DVD-R discs used with Multi-Format Dual-Layer DVD writer hold up to 8.5 GB). DVD-R discs can only be written to once; DVD-RW discs can be written to several times. DVD-R/ DVD-RW discs can be played on most standard players. CD-R and CD-RW discs hold up to 700 MB of data. A CD-R disc can only be written to once; CD-RW discs can be written to over and over.

9 Depending upon your notebook configuration, you may have one of the following fixed optical drives: DVD/CD-RW combo: The combo drive allows you to access movie, software, data, or audio DVD/CDs, and to write data onto recordable CD-R and CD-RW discs. Dual-Layer Multi-Format DVD Writer: This drive allows you to access movies, software, and audio DVD/CDs as well as to read and write to CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW, and DVD RAM discs. Depending upon your port replicator configuration, if you have an optical drive model it will include one of the following software packages. FPCPR88AP (Port Replicator with Dual-Layer Multi-Format DVD Writer): Roxio Creator LJ CyberLink PowerDirector DE FPCPR89AP (Port Replicator with DVD/CD- RW Combo Drive): Roxio Creator LJ Install your media player software before first using the optical drive. Refer to the readme or help file associated with the software. 9

10 MEDIA PLAYER SOFTWARE The optical disk drive and media player software let you play DVDs and CDs on your notebook. The media player includes controls which allow you to take full advantage of the DVD movie features, as well as standard features like fast forward, fast reverse, pause, etc. With this drive you can also burn onto recordable discs. Do not operate your optical drive unless your LifeBook notebook is sitting on a flat surface. Using a drive when the system is not level may damage the drive or prevent proper operation. LOADING MEDIA ON YOUR DRIVE To load a disc into your optical drive: (Figure 6) 1. Push and release the eject button on the front of the optical drive to open the holder tray. The tray will come out of the port replicator a short distance. 2. Gently pull the tray out until a media disc can easily be placed in the tray. You should periodically check the Fujitsu website at: for current updated drivers. 10

11 All LifeBook DVD players are set to play DVD titles with region code number 1 which is specified for the North American market. The region number is a regional restriction code defined by the DVD Forum acting on Hollywood requirements. Different region codes are recorded on video DVD titles for publication in different areas of the world. If the regional code of the DVD player does not match the regional codes on the titles, then playback is impossible. You can change the region code on the DVD player using the Properties menu of the DVD software. Note, however, that you can only change the region code up to four times. After the fourth change, the last region code entered becomes permanent, and cannot be changed. 3. Place the media into the tray, label side up, with the hole in the center of the disc. Snap the disc onto the raised circle in the center of the tray. 4. Gently push the holder tray back in until you hear a click. (Figure 6) If you have disabled the Auto Insert Notification Function, you will have to start the drive from your desktop, since your LifeBook notebook will not automatically recognize that media has been loaded. 11

12 (a) (b) (c) (d) Figure 6. Loading/Ejecting Media REMOVING MEDIA 1. Push and release the eject button on the front of the optical drive. This will stop the drive and the holder tray will come out of the LifeBook notebook a short distance. 2. Gently pull the tray out until the disc can easily be removed from the tray. 3. Carefully remove the media disc from the holder tray. 4. Gently push the holder tray back in until you hear a click. 12

13 EMERGENCY MEDIA TRAY RELEASE If for some reason the eject button fails, you can open the media tray with a paper clip inserted into the eject hole in the far right side of the front of the tray. Straighten one side of a paper clip and push it gently into the hole. The tray will pop out a short distance. (Figure 7) Figure 7. Emergency Removal of a CD/DVD 13

14 DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name: Fujitsu Computer Systems Corporation Address: 1250 E. Arques Avenue, M/S 122 Sunnyvale, CA Telephone: (408) Declares that products: - Port Replicator FPCPR87AP - Port Replicator (w/dual-layer Multi- Format DVD Writer) FPCPR88AP - Port Replicator (w/dvd/cd-rw Drive) FPCPR89AP Comply with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. 14

15 15

16 Fujitsu Computer Systems Corporation 1250 E. Arques Avenue, (M/S 122) Sunnyvale, California For more information, call FUJITSU or visit our Web site at: For technical support call: fujitsu ( ) or us at: Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Ltd. Roxio is a trademark or registered trademark of Sonic Solutions. PowerDirector is a trademark of CyberLink Corporation. All other trademarks mentioned herein are the property of their respective owners. Product description data reflects Fujitsu design objectives and is provided for comparative purposes; actual results may vary based on a variety of factors. Specifications are subject to change without notice Fujitsu Computer Systems Corporation. All rights reserved. B5FY EN-00 16