Cisco Meraki. Setup Guide. Published April Version 1.0

Transcription

1 Cisco Meraki Setup Guide Published April Version 1.0

2 Disclaimer THIS DOCUMENTATION AND ALL INFORMATION CONTAINED HEREIN ( MATERIAL ) IS PROVIDED FOR GENERAL INFORMATION PURPOSES ONLY. GLOBAL REACH AND ITS LICENSORS MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THE MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE MATERIAL IS ERROR- FREE, ACCURATE OR RELIABLE. GLOBAL REACH RESERVES THE RIGHT TO MAKE CHANGES OR UPDATES TO THE MATERIAL AT ANY TIME. Limitation of Liability IN NO EVENT SHALL GLOBAL REACH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR DAMAGES FOR LOSS OF PROFITS, REVENUE, DATA OR USE, INCURRED BY YOU OR ANY THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT OR TORT, ARISING FROM YOUR ACCESS TO, OR USE OF, THE MATERIAL. 2 Global Reach Technology globalreachtech com

3 IMPORTANT - BEFORE YOU START Before attempting to integrate your hardware controller in to Odyssys, please ensure that ALL of the following requirements are in place; You have a controller sat in an environment where Access Points are configured to work with the controller, i.e - DNS, DHCP options configured correctly Access points should be able to successfully obtain the configuration from controller Your client environment is configured to allow clients to; Associate to an Access Point Obtain an IP address Access to the internet Components required to be configured and working in your environment before attempting integration with Odyssys; DHCP Server DNS Server Firewall NAT PLEASE NOTE - Odyssys does not use standard RADIUS ports so please make sure you allow the ports in your firewall defined in your manager.odyssys.net Captive Portal settings. This is a technical document and as such, integration of your hardware with Odyssys should only be handled by trained individuals. 3 Global Reach Technology globalreachtech com

4 GETTING STARTED WITH ODYSSYS Before you attempt to configure your controller for use with Odyssys, you will need to create your own Captive Portal in order to get the required details. 1. Navigate to the address 2. Login using your Customer ID, Username and Password 3. Using the navigation panel on the left side, click Captive Portals -> Captive Portals and then click Create Captive Portal 4. Enter in the following details for your Captive Portal Name: <Enter a name for your captive portal> Description: <Enter a description for your captive portal> RADIUS Shared Secret: <Either keep the current shared secret or create your own> Hardware Vendor: Meraki Click Create to complete initial Captive Portal setup 4 Global Reach Technology globalreachtech com

5 5. Click on the newly created Captive Portal and it will display the information required to setup your Cisco Meraki Please Note: The information will differ per Captive Portal created and is unique to each individual Captive Portal. Please check your Odyssys account for your own details. 5 Global Reach Technology globalreachtech com

6 CONFIGURING ODYSSYS WITHIN CISCO MERAKI 1. Login to your Cisco Meraki Dashboard (dashboard.meraki.com) 2. Click Configure -> SSIDs 3. Click rename to assign a name to your SSID and then click save. 4. Click edit settings and enter in the following settings Association requirements Open (no encryption) Splash Page Sign on with my RADIUS server. RADIUS for splash page These details are obtained from your Odyssys account. RADIUS accounting RADIUS accounting is enabled (Note - You may need to send a support request to Meraki to enable this feature) RADIUS accounting servers - These details are obtained from your Odyssys account. 6 Global Reach Technology globalreachtech com

7 7 Global Reach Technology globalreachtech com

8 Walled Garden Walled Garden is enabled. Walled Garden Ranges - These details are obtained from your Odyssys account, under the Captive Portal -> General Info tab and click Show Walled Garden IPs (Note - You may need to send a support request to Meraki to enable domain based Walled Garden entries) Save your changes. 8 Global Reach Technology globalreachtech com

9 5. From the sidebar go to Configure ->Splash Page. 6. Enter in the following settings Custom splash URL Enter in the Splash Page URL from your Odyssys account. Splash behavior - Enter in the Success Page URL from your Odyssys account. Save your changes. 7. Return to the Wireless -> SSIDs page, and enable your SSID. 9 Global Reach Technology globalreachtech com

10 ACCESS CONTROL LIST ADDRESSES Please note that you will need to do an nslookup for the current ip addresses of the DNS names of some authentication providers due to the provider having changing IP addresses. There may also be more than one IP address per DNS name. Odyssys Twitter api.twitter.com *.twimg.com Google Facebook *.facebook.com *.akamaihd.net *.fbcdn.net connect.facebook.com LinkedIn PayPal Express Checkout / / / / /32 If you wish to disable Apple's Captive Assistant please add the following to your walled garden captive.apple.com 10 Global Reach Technology globalreachtech com

11 FREQUENTLY ASKED QUESTIONS Q. I want to add different authentication provider types, how do I do this? A. Please see our Odyssys Authentication guide for further information. Q. I need more information on how to setup Odyssys A. Please see our Odyssys setup guide. 11 Global Reach Technology globalreachtech com

12 GLOSSARY ACL - Access Control List AAA - Authentication, Authorization, and Accounting DHCP - Dynamic Host Configuration Protocol DNS - Domain Name Service NAT - Network Address Translation PORT - A process-specific or an application-specific software construct serving as a communication endpoint, which is used by the Transport Layer protocols of Internet Protocol suite, such as User Diagram Protocol (UDP) and Transmission Control Protocol (TCP) RADIUS - Remote Authentication Dial In User Service(RADIUS) SHARED SECRET - A single password shared between two devices SSID - Service Set Identifier - A unique identifier for your Wi-Fi service WLAN - Wireless Local Area Network WLC - Wireless Local Area Network Controller 12 Global Reach Technology globalreachtech com

13 Global Reach Technology Ltd Craven House, 121 Kingsway London WC2B 6PA T +44 (0) info@globalreachtech.com Copyright Global Reach Technology Limited All rights reserved. Global Reach and the Global Reach logo are registered trademarks.