Can't connect since changing Internet provider

Transcription

1 Can't connect since changing Internet provider Roadshow Support -> Can't connect since changing Internet provider #1/9 Posted: :00 Post subject: Can't connect since changing Internet provider Hi: I've been reading threads but I can't still get online wifi with my Pcmcia Orinoco Gold. I've got the nameservers changed to nameserver and and I've got Prism2 changed to not use dhcp and I've selected as ip and as netmask. I've tried as nameservers the gateway or also the DNS'. I can ping the router address or also the nameservers or , but I can not ping it says "Host name lookup failure". Ping failed returncode 20 I don't know how to configure HOSTS. I also don't know what wirelessmanager makes in the user-startup. In my startup-sequence I use like I've always done SetPrism2Defaults SSID JAZZTEL_4xrs TEXTKEY Z00xxxxxxx JAZZTEL_4xrs is the name of my wifi signal, the one I use in my laptop without problems. The textkey is right too. If I start IBrowse it complains "Host loockup failed. No DNS entries found". Rotzloeffel #2/9 Posted: :37 Post subject: Re: Can't connect since changing Internet provider wrote: looks like your networkcard uses the same ip as your router... this will never work... there went something wrong by canging the ip to as you mentioned above. check your config-file in Devs:Netinterfaces/

2 Thomas #3/9 Posted: :05 Post subject: Re: Can't connect since changing Internet provider wrote: I've got Prism2 changed to not use dhcp Why did you stop using DHCP? Normally, if you have a router, changing the provider does not need any changes on the computers. Only the settings of the router need to be adjusted. #4/9 Posted: :36 Post subject: Re: Can't connect since changing Internet provider Rotzloeffel wrote: wrote: looks like your networkcard uses the same ip as your router... this will never work... there went something wrong by canging the ip to as you mentioned above. check your config-file in Devs:Netinterfaces/ Oh, yes sorry. It seems it was the last time I changed something. I've put it right again with now, but it doesn't connect to internet. Edit: 37 again now. Thomas I disabled dhcp because if I leave it, after a time it just says "Address allocation for Prism2 timed out. In fact I've got saved all of the files of the old configuration I was using with my former internet provider (the new ones supply a new preconfigured router), and first I only changed the dns' and the SetPrism2Defaults SSID name and textkey. I changed the key on the router to have the same one I was using, and it works with my mobile or my laptop. Today I've received an internet pcmcia card that uses Ethernet cable, but I think I will have the same problems and also I'm not sure what to change. Anyway I would prefer to use Wifi instead. I repeat I don't have an idea what to make with "HOSTS" -I didn't make anything with my former provider and I've never noticed "wirelessmanager" doing anything or asking for a key or whatever. I add the key in the s-s, I suppose that's right.edit: I forgot I put the key when installing it. Now I've deleted the files of Prism2V2 and reinstalled Prism2 that was working before, but it's the same. I was wrong, sorry. I told I can make a ping, but NOT, I can't (at least toda). It says "unknown error code". I've tried assigning from Google too but it's the same with the ping. Amiga Future - 2

3 I will be glad to post any test you tell me or ipconfig in my laptop you ask me. Edit: Screenshot with SGrab: url= #5/9 Posted: :33 Post subject: My IpConfig: Code: Microsoft Windows [Versión ] Copyright (c) 2009 Microsoft Corporation. Reservados todos los derechos. C:\Users\Retrofan>ipconfig /all Configuración IP de Windows Nombre de host : Retrofan-C64 Sufijo DNS principal..... : Tipo de nodo : híbrido Enrutamiento IP habilitado... : no Proxy WINS habilitado..... : no Lista de búsqueda de sufijos DNS: Home Adaptador de LAN inalámbrica Conexión de red inalámbrica 2: Estado de los medios : medios desconectados Sufijo DNS específico para la conexión.. : Descripción : Microsoft Virtual WiFi Miniport A dapter Dirección física : 00-E0-4C-02-F8-72 Adaptador de LAN inalámbrica Conexión de red inalámbrica: Sufijo DNS específico para la conexión.. : Home Descripción : Realtek RTL8188SU Wireless LAN n USB 2.0 Network Adapter Dirección física : 00-E0-4C-02-F8-72 Vínculo: dirección IPv6 local... : fe80::b027:99cc:b695:739b%12(preferido) Dirección IPv : (Preferido) Máscara de subred : Concesión obtenida : lunes, 11 de enero de :32: 50 La concesión expira : jueves, 14 de enero de :09 :08 Puerta de enlace predeterminada..... : Amiga Future - 3

4 Servidor DHCP : IAID DHCPv : DUID de cliente DHCPv : A-9C-13-F5-F4-6D-04- E8-A3-CA Servidores DNS : NetBIOS sobre TCP/IP : habilitado Adaptador de Ethernet Conexión de área local: Sufijo DNS específico para la conexión.. : Home Descripción : Realtek PCIe GBE Family Controlle r Dirección física : F4-6D-04-E8-A3-CA Vínculo: dirección IPv6 local... : fe80::50c2:b5cb:7f09:5f89%11(preferido) Dirección IPv : (Preferido) Máscara de subred : Concesión obtenida : lunes, 11 de enero de :32: 47 La concesión expira : jueves, 14 de enero de :32 :47 Puerta de enlace predeterminada..... : Servidor DHCP : IAID DHCPv : DUID de cliente DHCPv : A-9C-13-F5-F4-6D-04- E8-A3-CA Servidores DNS : NetBIOS sobre TCP/IP : habilitado C:\Users\Retrofan> #6/9 Posted: :37 Post subject: With "GetStatus" I get: -bsdsocket.library ( ) -Networking interfaces are available and configured -No point-to-point networking interfaces are available and configured -Broadcast networking interfaces are available and configured -Name resolution servers are configured -Routing information is configured -The Default route is configured I've reinstalled Prism2V2 and disabled the line in the S-S where I was setting the Defaults. What do I think? I think my new router needs to add or change some config Roadshow needs. I didn't know you were also here Thomas and I'm glad, but I think this is somekind of "Impossible Mission" to get the Amiga online with my new internet provider and I will have to wait a couple of years without internet to change it Thomas #7/9 Posted: :22 Post subject: Amiga Future - 4

5 I don't know how the prism2 driver works. Is there any indication whether the connection is established or not? The fact that DHCP times out might indicate that the connection is not up. I don't think the problem is with Roadshow. You should first make sure that prism2 successfully connects to the router. The readme of prim2v2 says that some WIFI cards don't support CCMP encryption. Maybe you have to allow TKIP in the router configuration. Or maybe the new router supports a different frequency band. Make sure that both the router and the prism2 card transmit on the same band. And try DHCP over ethernet cable. If this works, then there surely is something wrong with your WIFI config. #8/9 Posted: :09 Post subject: Thomas wrote: I don't know how the prism2 driver works. Is there any indication whether the connection is established or not? The fact that DHCP times out might indicate that the connection is not up. I don't think the problem is with Roadshow. You should first make sure that prism2 successfully connects to the router. The readme of prim2v2 says that some WIFI cards don't support CCMP encryption. Maybe you have to allow TKIP in the router configuration. Or maybe the new router supports a different frequency band. Make sure that both the router and the prism2 card transmit on the same band. And try DHCP over ethernet cable. If this works, then there surely is something wrong with your WIFI config. Thanks Thomas. You seem to be right. Tomorrow I will look with more time. I've disabled Wirelessmanager from the user-startup and I've started it later. Wirelessmanager is a program in C that Prism2V2 adds. It creates a key when you install the program after asking your SSID name and key. I've tried with the SetPrism2Defaults in the S-S disabled or enabled just in case. Making a run c:wirelessmanager prism2.device tells: Trying to assiciate with... SSID="JAZZTEL_4xrs" freq=2432mz WPA: Failed to set WPA key management and encription suites. Tomorrow I will try to use another kind of key in the router or something. I remember Prism2V2 gives the option to use another encription code, but I don't remember which. #9/9 Posted: :02 Post subject: Many thanks Thomas. I've been tinkering with the router and the key encription and now I am online finally with Wifi. Amiga Future - 5