ITBraindumps. Latest IT Braindumps study guide

Transcription

1 ITBraindumps Latest IT Braindumps study guide

2 Exam : Title : Implementing Cisco IP Routing Vendor : Cisco Version : DEMO Get Latest & Valid Exam's Question and Answers 1 from Itbraindumps.com. 1

3 NO.1 A network engineer is trying to implement broadcast-based NTP in a network and executes the ntp broadcast client command. Assuming that an NTP server is already set up, what is the result of the command? A. It enables receiving NTP broadcasts on all interfaces globally. B. It enables receiving NTP broadcasts on the interface where the command was executed. C. It enables a device to receive NTP broadcast and unicast packets. D. It enables a device to be an NTP peer to another device. NO.2 Where can NetFlow export data for long term storage and analysis? A. flat file B. another network device C. collector D. syslog Answer: C NO.3 Which are two methods for migrating routing protocols?(choose Two) A. ACL B. Route targets C. Redistribution D. Changing AD Distance E. Transitions mechanisms Answer: C,D NO.4 You need the IP address of the devices with which the router has established an adjacency. Also, the retransmit interval and the queue counts for the adjacent routers need to be checked. What command will display the required information? A. show ip eigrp interfaces B. show ip eigrp neighbor C. show ip eigrp adjacency D. show ip eigrp topology NO.5 A network engineer enables OSPF on a Frame Relay WAN connecton to various remote stes, but no OSPF adiacencies come up. Which two actions are possible solutions for this issue? (Choose Two) A. Ensure that the OSPF process number matches among all remote sites B. Change the network type to point-to-multipont under WAN interface. C. Configure the neighbor command under OSPF process for each remote site D. Change the networktype to nonbroadcast mutpoint access. E. Enable virtual Inks.,C Get Latest & Valid Exam's Question and Answers 2 from Itbraindumps.com. 2

4 NO.6 Which prefix is matched by the command ip prefix-list name permit /16 ge 24 le 24? A /24 B /24 C /23 D /16 NO.7 Which two configurations can a PPPoE client support? (Choose Two) A. The client is connecting over an ATM PVC B. Eight clients are configured on a single CPE. C. The client is connected to multiple hosts over DMVPN D. The client is installed on the same network device as the server.,c NO.8 Refer to the exhibit. Which option prevents routing updates from being sent to the DHCP router, while still allowing routing update messages to flow to the Internet router and the distribution switches? A. Core(config-router)# passive-interface default Core(config-router)# no passive- interface Gi0/0 Core(config-router)# no passive-interface Gi3/1 Core(config-router)# no passive-interface Gi3/2 B. Core(config-router)# passive-interface Gi0/0 Core(config-router)# passive-interface Gi3/1 Core(config-router)# passive-interface Gi3/2 Get Latest & Valid Exam's Question and Answers 3 from Itbraindumps.com. 3

5 DHCP(config-router)# no passive-interface Gil1/0 C. Internet(config-router)# passive-interface default Core(config-router)# passive- interface default DSW1(config-router)# passive-interface default DSW2(config-router)# passive-interface default D. DHCP(config-router)# passive-interface default DHCP(config-router)# no passive- interface Gi1/0 Internet(config-router)# passive-interface Gi0/1 Internet (config-router)# passive-interface Gi0/2 Answer: A NO.9 Refer to the exhibit. Which option describes why the EIGRP neighbors of this router are not learning routes that are received from OSPF? A. The subnet defined in OSPF is not part of area 0. B. There is no overlap in the subnets advertised. C. Default metrics are not configured under EIGRP. D. The routing protocols do not have the same AS number. Answer: C NO.10 Single Multi-Homed what is True? A. connected to two ISPs using redudant links B. connected to two ISPs using single links C. connected to one ISP using redudant links D. connected to one ISP using single links NO.11 Which Cisco IOS VPN technology leverages IPsec, mgre, dynamic routing protocol, NHRP, and Cisco Express Forwarding? A. Cisco Easy VPN B. FlexVPN C. DMVPN Get Latest & Valid Exam's Question and Answers 4 from Itbraindumps.com. 4

6 D. GETVPN Answer: C NO.12 Customer enabled new link to partner using RIPng, how and where is RIPng configured? A. global B. (Other) C. router D. interface Answer: D NO.13 Which LSA type can exist only in an OSPF NSSA area? A. type 7 LSA B. type 3 LSA C. type 1 LSA D. type 5 LSA Answer: A NO.14 A Question: 461 that problem you need to configure? A. neighbor... ebpg-multihop [2] B. no synchronize C. load balancing something D. neighbor... update source loopback 0 Answer: A NO.15 DRAG DROP Drag and drop the statement from the left onto the correct IPv6 router security features on the right. Answer: Get Latest & Valid Exam's Question and Answers 5 from Itbraindumps.com. 5

7 NO.16 Where do you enable RIPng? A. Something config B. Interface config C. Global config D. Router config E. Something else config OmniSecuR2#configure terminal OmniSecuR2(config)#interface serial 1/0 OmniSecuR2(config-if)#ipv6 rip OmniSecuRIPng enable OmniSecuR2(config-if)#exit OmniSecuR2(config)#exit OmniSecuR2# NO.17 DRAG DROP Drag each statement about authentication, authorization, and accounting on the left to the matching category on right. Answer: Get Latest & Valid Exam's Question and Answers 6 from Itbraindumps.com. 6

8 NO.18 Refer to the exhibit. Get Latest & Valid Exam's Question and Answers 7 from Itbraindumps.com. 7

9 Based on this FIB table, which statement is correct? A. The router will listen for all multicast traffic. B. There is no default gateway. C. The gateway of last resort is D. The IP address of the router on FastEthernet is NO.19 Which three TCP enhancements can be used with TCP selective acknowledgments? (Choose three) A. header compression B. keepalive C. time stamps D. explicit congestion notification E. TCP path discovery F. MTU window,c,d NO.20 Which statement describes the difference between a manually configured IPv6 in IPv4 tunnel versus an automatic 6to4 tunnel? A. An automatic 6to4 tunnel does not require dual-stack (IPv4 and IPv6) routers at the tunnel endpoints. B. An automatic 6to4 tunnel allows multiple IPv4 destinations. C. A manually configured IPv6 in IPv4 tunnel does not require dual-stack (IPv4 and IPv6) routers at the tunnel endpoints. D. A manually configured IPv6 in IPv4 tunnel allows multiple IPv4 destinations. Get Latest & Valid Exam's Question and Answers 8 from Itbraindumps.com. 8