Planning the Electrical Systems
|
|
- Junior Stewart
- 5 years ago
- Views:
Transcription
1 Planning the Electrical Systems Before you begin The following files are needed for this Let Me Try exercise: For Imperial: For Metric: c06_archi-elec_tut1.rvt M_ c06_archi-elec_tut1.rvt To access the files from your dataset: If you haven t downloaded the dataset yet, open your course homepage. Click on the link: Click here to download the dataset for this course. Save the course dataset to the C:\ drive on your computer. Options for opening a Revit MEP project file(s): Begin by dragging it directly into the application or by using the Open command from the Application menu. Double click a Revit MEP file, but be aware that if you have more than one version of Revit MEP installed on your computer, the file will open in the last version of Revit MEP you used. Please ensure you save all your projects to your computer as directed by the Let Me Try instructions. Please ensure you save all your projects to your computer as directed by the Let Me Try instructions.
2 In this exercise, you will specify the settings for the electrical system and also load the family components required for the project. Opening the Project File In this section, you will open the project. 1. Choose Open > Project from the Application Menu; the Open dialog box is displayed. 2. In the dialog box, browse to C: Revit_MEP_2014_Essentials Creating_Electrical_System folder and then select the c06_archi_elec_tut1 (M_ c06_archi_elec_tut1) file. Next, choose the Open button; the project file is opened. Specifying Electrical Settings 1. Choose the Electrical Settings button from the Electrical panel of the Systems tab; the Electrical Settings dialog box is displayed. 2. In the left pane of this dialog box, click on the Wiring > Wiring Types node; a table is displayed. 3. Choose the Add button in the dialog box; a new row is displayed in the table. 4. In this row, specify the settings as follows: Name: AL-THHN Material: Aluminium Temperature: 75 Insulation: THHN Max Size: 500 Neutral Required: Select the check box Conduit Type: Steel Neutral Size: Hot Conductor 5. Next, in the left pane of the dialog box, select the Voltage Definitions node: a table is displayed. 6. In the table, retain the default settings for all the parameters, refer to the image below.
3 7. In the left pane of the dialog box, select the Distribution Systems node; a table is displayed in the right pane. 8. Retain the default settings in this table, as shown in the image below. 9. In the left pane of the dialog box, click on the Load Calculations node; various options related to the calculations of the electrical load are displayed in the right pane. 10. In the right pane, choose the Load Classifications button; the Load Classifications dialog box is displayed, as shown in the image below. 11. In the Load classification types area of this dialog box, select the Other option and then in the right side of the dialog box, ensure that the Other option is selected in the Demand Factor drop-down list. 12. Choose the browse button displayed next to the Demand Factor drop-down list; the Demand Factors dialog box is displayed, as shown in the image below.
4 13. In this dialog box, ensure that the Other option is selected in the Demand factor types area and then select the By load option from the Calculation method drop-down list; a table is displayed below it. 14. In the Calculation options area, select the Incrementally for each range radio button and then choose the Split the selected row button twice (icon displayed in + symbol). On doing so, two rows are added to the table; refer to the image below.
5 15. Now, assign the settings in this table, as given in the image below. 16. Choose OK; the Demand Factors dialog box is closed. Again, choose OK twice in the Load Classifications and Electrical Settings dialog boxes to close them. Loading the Electrical Components 1. Choose the Load Family tool from the Load from Library panel; the Load Family dialog box is displayed. 2. In the dialog box, browse to the US Imperial > Electrical > MEP > Electric Power > Distribution folder (for metric, browse to US Metric > Electrical > MEP > Electric Power > Distribution) and then select the Lighting and Appliance Panelboard - 208V MLO - Surface.rfa (for metric, M_ Lighting and Appliance Panelboard - 208V MLO - Surface.rfa) file from it. 3. Press and hold the CTRL key, and then select the Lighting and Appliance Panelboard - 480V MCB - Surface.rfa (for metric, M_Lighting and Appliance Panelboard - 480V MCB - Surface.rfa) file. 4. Choose the Open button; the Load Family dialog box is closed and the selected families are loaded in the project. 5. Repeat Steps 1 and 2 and select the other family files required for this tutorial from their respective folders. Refer to the table given next for the name of the file and their folder locations.
6 Saving and Closing the Project In this section, you need to save the project and the settings. 1. Choose Save As > Project from Application Menu; the Save As dialog box is displayed. 2. In this dialog box, browse to the C: rmp_2014 c06 folder and then in the File name edit box, enter the text c06_office-space_tut1a (for metric, M_c06_Office-Space_tut1a) and then choose the Save button to save the current project file with the specified name and to close the Save As dialog box. 3. Choose the Close option from Application Menu; the file is closed.
Heating and Cooling Load Analysis
Heating and Cooling Load Analysis Before you begin The following files are needed for this Let Me Try exercise: For Imperial: For Metric: c04_tut3_analysis_rmp2015 M_c04_tut3_analysis_rmp2015 To access
More informationPlacing Air Terminals
Placing Air Terminals Before you begin The following files are needed for this Let Me Try exercise: For Imperial: For Metric: c05_office-space_tut1.rvt M_ c05_office-space_tut1.rvt To access the files
More informationPlacing Spaces. Let Me Try! Before you begin. The following files are needed for this Let Me Try exercise: M_c04_archi_spaces_rmp2015.
Placing Spaces Before you begin The following files are needed for this Let Me Try exercise: For Imperial: For Metric: c04_archi_spaces_2016.rvt M_c04_archi_spaces_rmp2015.rvt To access the files from
More informationAdd Blocks to a Catalogue
Add Blocks to a Catalogue Before you begin The following files are needed for this Let Me Try exercise: c5tut03.dwg c5tut02.pcat You have several options available for accessing the file(s): 1. You can
More informationExchange Address Book Order
Exchange Address Book Order From your Outlook Ribbon, locate the Address Book Click on Tools, Options 3 options are available, as shown below, select Custom to arrange the order of your address books.
More informationSmart Hangers. Powerful solution for placing hangers in BIM model
Powerful solution for placing hangers in BIM model Working with MEP elements Smart Hangers extension Autodesk Revit Architecture/Structure/MEP and Autodesk Revit BIM software Smart Hangers powerful solution
More informationUser Account Manager
CHAPTER 4 Note User accounts can be accessed only when operating in Internal Directory mode. To access User tasks, log in to the system (see Logging In section on page 2-1). Then, from the Home page, click
More informationUsing File Cabinet In OwlNet
Navigating to the File Cabinet Using File Cabinet In OwlNet You may want to display the File Cabinet for any of the following reasons: To browse the items stored there. To organize saved items into folders.
More informationJoin Queries in Cognos Analytics Reporting
Join Queries in Cognos Analytics Reporting Business Intelligence Cross-Join Error A join is a relationship between a field in one query and a field of the same data type in another query. If a report includes
More informationSMART Recorder. Record. Pause. Stop
SMART Recorder The recorder is used to record actions that are done on the interactive screen. If a microphone is attached to the computer, narration can be recorded. After the recording has been created,
More informationDeveloping Intelligent Apps
Developing Intelligent Apps Lab 1 Creating a Simple Client Application By Gerry O'Brien Overview In this lab you will construct a simple client application that will call an Azure ML web service that you
More informationMicrosoft Office Outlook 2007: Intermediate Course 01 Customizing Outlook
Microsoft Office Outlook 2007: Intermediate Course 01 Customizing Outlook Slide 1 Customizing Outlook Course objectives Create a custom toolbar and customize the menu bar; customize the Quick Access toolbar,
More informationepact2 guide Using Selection Steps to show data totalled at multiple organisation/bnf levels within an analysis
epact2 guide Using Selection Steps to show data totalled at multiple organisation/bnf levels within an analysis Contents 1. Getting started page 2 2. Create a basic analysis Page 2 3. Filtering to limit
More informationFace to Face Thermal Link with the Thermal Link Wizard
SECTION 1 Face to Face Thermal Link with the 1 SECTION 1 Face to Face Thermal Link with the Thermal Link Wizard The following is a list of files that will be needed for this tutorial. They can be found
More informationToolkit Activity Installation and Registration
Toolkit Activity Installation and Registration Installing the Toolkit activity on the Workflow Server Install the Qfiche Toolkit workflow activity by running the appropriate SETUP.EXE and stepping through
More informationA Dreamweaver Tutorial. Contents Page
A Dreamweaver Tutorial Contents Page Page 1-2 Things to do and know before we start Page 3-4 - Setting up the website Page 5 How to save your web pages Page 6 - Opening an existing web page Page 7 - Creating
More informationBRIEFCASES & TASKS ZIMBRA. Briefcase can be used to share and manage documents. Documents can be shared, edited, and created using Briefcases.
BRIEFCASES & TASKS ZIMBRA BRIEFCASES Briefcase can be used to share and manage documents. Documents can be shared, edited, and created using Briefcases. Options Briefcase New Briefcase To create briefcases,
More informationMAIL MERGE LABELS USE THE MAIL MERGE WIZARD
MAIL MERGE LABELS USE THE MAIL MERGE WIZARD When working with the Mail Merge feature, it is possible to create several types of documents, such as labels. In this document, information on how to set up
More informationWorkflow automation Hot Tickets
Tutorial Workflow automation Hot Tickets Software version: Asanti 1.0 Document version: February 25, 2014 This tutorial demonstrates how to use Hot Tickets in Asanti. Sample files: \\[YOUR ASANTI SERVER]\Supportfiles\SampleFiles\Asanti
More informationTutorial 2. Building a Database and Defining Table Relationships
Tutorial 2 Building a Database and Defining Table Relationships Microsoft Access 2010 Objectives Learn the guidelines for designing databases and setting field properties Modify the format of a field in
More informationAccess Review. 4. Save the table by clicking the Save icon in the Quick Access Toolbar or by pulling
Access Review Relational Databases Different tables can have the same field in common. This feature is used to explicitly specify a relationship between two tables. Values appearing in field A in one table
More informationA Frontpage Tutorial. Contents Page
A Frontpage Tutorial Contents Page Page 1-2 Things to do and know before we start Page 3.How to save your web pages Page 4.Opening an existing web page Page 5..Creating more web pages Page 6-8.Adding tables
More informationHome page. Set Do Not Disturb. Set call forwarding
Home page The Home page appears immediately after users log in to Cisco Unified CM User Options. It can also be accessed by clicking Home in the Toolbar. The Home page contains general settings. The Home
More informationVerifying a Restore Repository
Verifying a Restore Repository As a part of the Laserfiche backup verification process, you may be asked to verify the contents of a Laserfiche restore repository. Once a month, an archival copy of the
More informationWord 2007 Appendix B Copy Student Files to Hard Drive
Word 2007 Appendix B Copy Student Files to Hard Drive Purpose Before you begin, you need to copy the contents of your student CD to your computer s hard drive. The following lesson will step you through
More informationCrot. Installation instructions & Tutorial. Anti plagiarism solutions. Desktop version. (c) Crot: Anti plagiarism solutions
Crot Anti plagiarism solutions Desktop version Installation instructions & Tutorial This document is under development. Please send all your enquiries to moodlecrot[@]gmail.com Contents Installation...
More informationv Working with Rasters SMS 12.1 Tutorial Requirements Raster Module Map Module Mesh Module Time minutes Prerequisites Overview Tutorial
v. 12.1 SMS 12.1 Tutorial Objectives This tutorial teaches how to import a Raster, view elevations at individual points, change display options for multiple views of the data, show the 2D profile plots,
More information1. Right-click the worksheet tab you want to rename. The worksheet menu appears. 2. Select Rename.
Excel 2010 Worksheet Basics Introduction Page 1 Every Excel workbook contains at least one or more worksheets. If you are working with a large amount of related data, you can use worksheets to help organize
More informationComputer Applications Data Processing
Lesson 4: Changing the Workbook Appearance Microsoft Excel 2016 IN THIS CHAPTER, YOU WILL LEARN HOW TO Format cells. Define styles. Apply workbook themes and Excel table styles. Make numbers easier to
More informationAdding entry information
BioNumerics Tutorial: Adding entry information 1 Aim Adding entry information to a BioNumerics database can be done in two ways: either manually via the keyboard, or with the import tools available in
More informationSharing your own BGSU Exchange calendar in Outlook 2007
Sharing a calendar Outlook gives you a variety of ways to share calendars with colleagues and friends. It also enables you to download public calendars from the internet, such as the schedule of your favorite
More informationA TUTORIAL ON WORD. Katie Gregory
A TUTORIAL ON WORD Katie Gregory First, CLICK HERE Then, find Microsoft Word under programs and the Microsoft Office 2013 Folder This is what the document should look like when opened. SAVING A WORD DOCUMENT
More informationProject Collaboration
Bonus Chapter 8 Project Collaboration It s quite ironic that the last bonus chapter of this book contains information that many of you will need to get your first Autodesk Revit Architecture project off
More informationNavigating a Database Efficiently
Navigating a Database Efficiently 1 Navigating a Database Efficiently THE BOTTOM LINE Often, the people who use a database are not the same people who create a database, and thus they may have difficulty
More informationCustomer Support Guide Creating a custom Headcount Dashboard
Customer Support Guide Creating a custom Headcount Dashboard Contents Purpose... 2 Rationale... 2 Step by Step Instruction... 3 Related Documentation... 11 Package Version Date HCM 16.01 02/02/2017 HCM
More informationEasy Windows Working with Disks, Folders, - and Files
Easy Windows 98-3 - Working with Disks, Folders, - and Files Page 1 of 11 Easy Windows 98-3 - Working with Disks, Folders, - and Files Task 1: Opening Folders Folders contain files, programs, or other
More informationOrganize Mail into Folders
Organize Mail into Folders In an effort to organize all of the emails that you receive, you can create mail folders to store them in. One email can be stored in multiple folders. Click the + next to Folders
More informationVictaulic Tools for Revit
Victaulic Tools for Revit User Manual Revit 2016, 2017, 2018 Table of Contents Introduction Section 01 Licensing Page 3 Section 02 Pipe Tools (Pipe / Duct Splitting) Page 4 Section 03 Pipe Tools (Pipe
More informationMicrosoft Word Basic Editing. Lesson , John Wiley & Sons, Inc. Microsoft Official Academic Course, Microsoft Word
Microsoft Word 2013 Lesson 2 Basic Editing 2014, John Wiley & Sons, Inc. Microsoft Official Academic Course, Microsoft Word 2013 1 Objectives 2014, John Wiley & Sons, Inc. Microsoft Official Academic Course,
More informationMAIL MERGE DIRECTORY USE THE MAIL MERGE WIZARD
MAIL MERGE DIRECTORY USE THE MAIL MERGE WIZARD When working with the Mail Merge feature, it is possible to create several types of documents, such as directories. A directory is a list of the data in the
More information1. Below is an example 1D river reach model built in HEC-RAS and displayed in the HEC-RAS user interface:
How Do I Import HEC-RAS Cross-Section Data? Flood Modeller allows you to read in cross sections defined in HEC-RAS models, automatically converting them to Flood Modeller 1D cross sections. The procedure
More informationWorking with Images 1 / 12
V2 APRIL 2017 1 / 12 To brighten up your website it is often nice to have images inserted onto various pages of your website. We have an easy option to size these photos on your page, as well as aligning
More informationjdoe 5. In the password field, enter in the same password you use to logon to your workstations. 6. Click OK.
Outlook Web Access Quick Start Document Logging On 1. Open Internet Explorer. 2. Type http://webmail.min201.org in the address bar or go to www.min201.org and click on I Webmail. 3. Enter the following
More information1 Introduction. ThinPrint Client Installation Page 1
ThinPrint Client Installation Page 1 1 Introduction In order to reduce the amount of bandwidth used when printing and to improve the overall performance and online experience for the customers that we
More informationResidential 1-Line Multifamily Instructions. User s Manual APPROVED. Copyright 2016 Durand & Associates. Page 1
Residential 1-Line 2017 Multifamily Instructions APPROVED User s Manual Copyright 2016 Durand & Associates Page 1 Using Residential 1-Line 2017 with Excel Excel 1997-2003 This product was designed with
More informationTicket Mail Merge Instructions for MS Word 2007 and 2010
Before starting the mail merge process make sure both the ticket template merge document and bidder number excel file are saved to your computer. These files are located on the volunteer resource site
More informationOUTLOOK COMMAND CENTER
NEIL MALEK, MCT There is so much you can do automatically in Outlook with just a few clicks. In this session, we ll be focused on tools like the Favorites Panel, To-Do Bar, Quick Steps, Color Coding, and
More informationUsing Microsoft Word. Text Editing
Using Microsoft Word A word processor is all about working with large amounts of text, so learning the basics of text editing is essential to being able to make the most of the program. The first thing
More informationHousekeeping...1 Introduction...1 Using folders...1 Archiving s...8
9742C: Use and Maintain Personal E-Mail Housekeeping...1 Introduction...1 Using folders...1 Archiving emails...8 Housekeeping Introduction In this section you will learn how develop good email housekeeping
More informationCOMM 391 Winter 2014 Term 1. Tutorial 1: Microsoft Excel - Creating Pivot Table
COMM 391 Winter 2014 Term 1 Tutorial 1: Microsoft Excel - Creating Pivot Table The purpose of this tutorial is to enable you to create Pivot Table to analyze worksheet data in Microsoft Excel. You should
More informationTRAINING MODULE APOGEE PREPRESS 8.0 VERSIONING
TRAINING MODULE APOGEE PREPRESS 8.0 VERSIONING This document is only a preview of the training module. If you would like to obtain more information about this training module, please contact your local
More informationTo complete this project, you will need the following folder:
= CHAPTER 1 Windows 7 More Skills 12 Use Libraries to Organize Files A library is a collection of files and folders stored in different locations on your computer that can be viewed as a single folder.
More informationv Importing Rasters SMS 11.2 Tutorial Requirements Raster Module Map Module Mesh Module Time minutes Prerequisites Overview Tutorial
v. 11.2 SMS 11.2 Tutorial Objectives This tutorial teaches how to import a Raster, view elevations at individual points, change display options for multiple views of the data, show the 2D profile plots,
More informationPlease Note: If you're new to Revit, you may be interested in my " Beginner's Guide to Revit Architecture
Please Note: If you're new to Revit, you may be interested in my " Beginner's Guide to Revit Architecture " 84 part video tutorial training course. The course is 100% free with no catches or exclusions.
More informationAutoCAD MEP edition. Updates for The Aubin Academy Master Series. Paul F Aubin Darryl McClelland, LEED AP Martin Schmid, PE Gregg Stanley
The Aubin Academy Master Series AutoCAD MEP 2012 edition Updates for 2013 Paul F Aubin Darryl McClelland, LEED AP Martin Schmid, PE Gregg Stanley G3B Press 2 Updates for 2013 Updates for 2013 WELCOME If
More informationDealing with Event Viewer
Dealing with Event Viewer Event Viewer is a troubleshooting tool in Microsoft Windows 2000.This how-to article will describe how to use Event Viewer. Event Viewer displays detailed information about system
More informationQuickStart Guide. Using Receipt Store Concur Technologies Inc. All rights reserved. Revised: March 7,
QuickStart Guide Using Receipt Store Revised: March 7, 2012 1 Using Receipt Store The Receipt Store feature allows you to associate receipt images with specific expense entries. It also allows managers
More informationVersion 9 Client Workflow Interface (Dashboard) Quick Start Guide
Version 9 Client Workflow Interface (Dashboard) Quick Start Guide Client Workflow Interface (Dashboard) Quick Start Guide The Quick Start Guide will walk you through the initial steps of using the Progeny
More informationSteady-State and Transient Thermal Analysis of a Circuit Board
Steady-State and Transient Thermal Analysis of a Circuit Board Problem Description The circuit board shown below includes three chips that produce heat during normal operation. One chip stays energized
More informationREVIT - ENTOURAGE & MATERIALS
TUTORIAL C-29B: REVIT - ENTOURAGE & MATERIALS This Tutorial explains how to insert Entourage Elements such as Revit People and Trains; as well as, how to apply materials to all the various Revit components
More informationTutorial 3 - Performing a Change-Point Analysis in Excel
Tutorial 3 - Performing a Change-Point Analysis in Excel Introduction This tutorial teaches you how to perform a change-point analysis while using Microsoft Excel. The Change-Point Analyzer Add-In allows
More informationStudent Manual. Cognos Analytics
Student Manual Cognos Analytics Join Queries in Cognos Analytics Reporting Cross-Join Error A join is a relationship between a field in one query and a field of the same data type in another query. If
More informationRevit MEP Project Setup Procedure
NOTE: The following summarize the steps required to set up a Revit MEP project from scratch where an architectural model is linked into the MEP project. This information is not authorized by Autodesk and
More informationManaging the Capability Catalog in Cisco UCS Manager
Managing the Capability Catalog in Cisco UCS Manager This chapter includes the following sections: Capability Catalog, page 1 Activating a Capability Catalog Update, page 3 Verifying that the Capability
More informationRevit Architecture 2015 Basics
Revit Architecture 2015 Basics From the Ground Up Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More information2. create the workbook file
2. create the workbook file Excel documents are called workbook files. A workbook can include multiple sheets of information. Excel supports two kinds of sheets for working with data: Worksheets, which
More informationApplied Machine Learning
Applied Machine Learning Lab 3 Working with Text Data Overview In this lab, you will use R or Python to work with text data. Specifically, you will use code to clean text, remove stop words, and apply
More informationWorking with Macros. Creating a Macro
Working with Macros 1 Working with Macros THE BOTTOM LINE A macro is a set of actions saved together that can be performed by issuing a single command. Macros are commonly used in Microsoft Office applications,
More informationUsing Dreamweaver. 4 Creating a Template. Logo. Page Heading. Home About Us Gallery Ordering Contact Us Links. Page content in this area
4 Creating a Template Now that the main page of our website is complete, we need to create the rest of the pages. Each of them will have a layout that follows the plan that is shown below. Logo Page Heading
More informationWord 2007 Mail Merge
Word 2007 Mail Merge Mail Merge is the production of multiple documents from a single template form and a structured data source. This helps to create personalized letters and pre-addressed envelopes or
More informationChapter 12 Dealing With Data Tutorial
Chapter 12 Dealing With Data Tutorial 1. Visit the student website at for this textbook at www.clowjames.net/students. 2. Download the following files: Chapter 12 Dealing with Data (SPSS data file) Chapter
More informationv CMS-Flow SMS Tutorials Requirements Time Prerequisites Objectives
v. 12.2 SMS 12.2 Tutorial Objectives This lesson demonstrates how to prepare a grid and run a solution using. Prerequisites SMS Overview Requirements Map Module Cartesian Grid Module Scatter Module Time
More informationAnonymous Group Manager GUI Tool
This chapter provides details on the Anonymous Group Manager GUI tool and how to manager Anonymous Groups using the Cisco SCA BB. This chapter describes how to use the Anonymous Group Manager graphical
More informationSwitchboard. Creating and Running a Navigation Form
Switchboard A Switchboard is a type of form that displays a menu of items that a user can click on to launch data entry forms, reports, queries and other actions in the database. A switchboard is typically
More informationv SMS Tutorials Working with Rasters Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Objectives Learn how to import a Raster, view elevations at individual points, change display options for multiple views of the data, show the 2D profile plots, and interpolate
More informationThis tutorial covers the basics of working importing scatter data into SMS and exporting SMS data as a text file.
v. 13.0 SMS 13.0 Tutorial Objectives This tutorial covers the basics of working importing scatter data into SMS and exporting SMS data as a text file. Prerequisites None Requirements Scatter Module Map
More informationTable of Contents. Table of Contents... I. Table of Figures... III. Tutorial VIII-A Nesting Branch General Example...4
Table of Contents Radiant Technologies, Inc. 2835D Pan American Freeway NE Albuquerque, NM 87107 Tel: 505-842-8007 Fax: 505-842-0366 e-mail: radiant@ferrodevices.com Table of Contents... I Table of Figures...
More informationClassic Headlines & Featured App Guide
Classic Headlines & Featured App Guide Blackboard Web Community Manager Trademark Notice Blackboard, the Blackboard logos, and the unique trade dress of Blackboard are the trademarks, service marks, trade
More informationDropSend Getting Started Guide
DropSend Getting Started Guide DropSend. 2016 Step 1: How to send a file without registration If you want to quickly send a large file, you can do it from the homepage in just a couple of clicks. Here
More informationHeat Exchanger Efficiency
6 Heat Exchanger Efficiency Flow Simulation can be used to study the fluid flow and heat transfer for a wide variety of engineering equipment. In this example we use Flow Simulation to determine the efficiency
More informationManaging the Capability Catalog in Cisco UCS Manager
Managing the Capability Catalog in Cisco UCS Manager This chapter includes the following sections: Capability Catalog, page 1 Activating a Capability Catalog Update, page 3 Verifying that the Capability
More informationLayout Tutorial. Getting Started. Creating a Layout Template
Layout Tutorial This tutorial will explain how create a layout template, send views to a layout page, then save the document in PDF format. In this tutorial you will learn about: Creating a Layout Template
More informationBeginner s Guide to Microsoft Excel 2002
Beginner s Guide to Microsoft Excel 2002 Microsoft Excel lets you create spreadsheets, which allow you to make budgets, track inventories, calculate profits, and design charts and graphs. 1. Open Start
More informationCOMPUTER TRAINING WORKSHOP MEETING MAKER
COMPUTER TRAINING WORKSHOP MEETING MAKER Presented By Information Technology Services Support Table of Contents Overview 2 Introduction to Calendar 2 The Main Window 3 The Daily View 4 The Taskbar 4 Proposing
More informationManage the Capability Catalog in Cisco UCS Manager
Manage the Capability Catalog in Cisco UCS Manager Capability Catalog, on page 1 Activating a Capability Catalog Update, on page 2 Verifying that the Capability Catalog Is Current, on page 3 Viewing a
More informationTraining Content Key Terms... 1 How to Run a Report... 2 How to View a Dashboard... 5 How to Modify & Customize Reports... 6
Salesforce Reporting Tools Technical Assistance email: support@salesforce.asu.edu Salesforce: http://asu.my.salesforce.com Training Content Key Terms... 1 How to Run a Report... 2 How to View a Dashboard...
More informationRead Temperature Data
Read Temperature Data Exercise 5 Completed front panel and block diagram In this exercise, you will create a program using SensorDAQ s Analog Express VI to collect temperature data and display it on a
More informationMultimedia Authoring LAB-7 CSA 216
Add a Flash movie You can import a Flash movie for the lens term that uses animation to demonstrate how light enters the camera lens. Authorware lets you scale the dimensions of the movie upon import.
More informationIn this exercise, you ll create a netcdf raster layer using the variable tmin. You will change the display by selecting a different time step.
Learning to Work with Temporal Data in ArcGIS Working with a netcdf File in ArcGIS Objective NetCDF (network Common Data Form) is a file format for storing multidimensional scientific data (variables)
More informationIntroduction & Navigation
Introduction & Navigation Logging In to Marketing Cloud 1. Open a tab in either the Chrome or Firefox web browser. 2. Place your cursor in the URL bar then type mc.exacttarget.com. 3. Strike the Enter
More informationCreating a Dashboard Prompt
Creating a Dashboard Prompt This guide will cover: How to create a dashboard prompt which can be used for developing flexible dashboards for users to utilize when viewing an analysis on a dashboard. Step
More informationMicrosoft Power BI Tutorial: Importing and analyzing data from a Web Page using Power BI Desktop
Microsoft Power BI Tutorial: Importing and analyzing data from a Web Page using Power BI Desktop Power BI Desktop In this tutorial, you will learn how to import a table of data from a Web page and create
More informationFolders Projects, Folders and Menus. Table of Contents. 1.0 Folder Types. 2.0 Folder Menu Commands
Folders Projects, Folders and Menus Table of Contents 1.0 Folder Types 2.0 Folder Menu Commands 1.0 Folder Types ProjectWise folders differ from Windows folders in that each ProjectWise folder has a type,
More informationTutorial: Using LiDAR Data for Power Line Corridor Management
Tutorial: Using LiDAR Data for Power Line Corridor Management Contents Introduction... 2 Software requirements... 2 Sample data... 2 Exercise 1: Power line corridor modeling... 3 Classifying power lines
More informationQuick Reference Guide SharePoint Quick Reference Guide
Quick Reference Guide 1 P age Table of Contents What is SharePoint?... 3 1. Home Page Layout... 4 2. Uploading Documents to a Library... 6 3. To Open a Document... 7 4. To Delete a Document... 7 5. Adding
More informationStep by Step: Create a Table of Contents USE the First Ladies Research with Endnotes that is open from the previous exercise.
Step by Step: Create a Table of Contents USE the First Ladies Research with Endnotes that is open from the previous exercise. 1. Position the insertion point at the beginning of the document. Add a next
More informationTutorial 1. Creating a Database
Tutorial 1 Creating a Database Microsoft Access 2010 Objectives Learn basic database concepts and terms Explore the Microsoft Access window and Backstage view Create a blank database Create and save a
More informationAutodesk Revit MEP: Fast Families for Engineers David Butts Gannett Fleming
David Butts Gannett Fleming MP2531-L Once you start using Revit MEP, you find out that you need to learn how to create custom families and fast! This hands-on lab starts with the basics of creating custom
More informationCollections. Learning Objectives. In this Job Aid, you will learn how to:
Collections Learning Objectives In this Job Aid, you will learn how to: 1 Create a new Collection page 3 2 Add content to an existing Collection page 6 3 View the content in a Collection page 9 4 Order
More informationScheduling Weights via Volumes in Revit
Page 1 of 9 Scheduling Weights via Volumes in Revit Calculating the Weight of any Material by a Volume parameter Autodesk Revit Structure has many great functions and ways to model. It is also great at
More information