DataMan Configuration Codes

Transcription

1 DataMan Configuration Codes 9/26/2014 Version 5.4

2 Legal Notices The software described in this document is furnished under license, and may be used or copied only in accordance with the terms of such license and with the inclusion of the copyright notice shown on this page. Neither the software, this document, nor any copies thereof may be provided to, or otherwise made available to, anyone other than the licensee. Title to, and ownership of, this software remains with Cognex Corporation or its licensor. Cognex Corporation assumes no responsibility for the use or reliability of its software on equipment that is not supplied by Cognex Corporation. Cognex Corporation makes no warranties, either express or implied, regarding the described software, its merchantability, non-infringement or its fitness for any particular purpose. The information in this document is subject to change without notice and should not be construed as a commitment by Cognex Corporation. Cognex Corporation is not responsible for any errors that may be present in either this document or the associated software. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, nor transferred to any other media or language without the written permission of Cognex Corporation. Copyright 2014 Cognex Corporation. All Rights Reserved. Portions of the hardware and software provided by Cognex may be covered by one or more of the U.S. and foreign patents listed below as well as pending U.S. and foreign patents. Such pending U.S. and foreign patents issued after the date of this document are listed on Cognex web site at VisionPro , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , EP , JP , JP DataMan , , , , , , , , , , , , , , , , , , US A1, US A1, US A1, US A1, US A1, US A1, US A1, US A1, US A1, US A1, US A1, US A1, US A1, US A1, US , US A1, US A1, US A1, WO A1, EP CVL , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , EP , JP , JP VGR , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , OMNIVIEW , , , , , , , , , CVL Vision Library , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , EP , JP , JP SMD , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , P a g e 2

3 Legal Notices , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , BGA II and BGA III , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Wire Bonder , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , The following are registered trademarks of Cognex Corporation: acureader BGAII Check it with Checker Checker Cognex Vision for Industry CVC-1000 CVL DataMan DisplayInspect DVT EasyBuilder IDMax In-SightIn-Sight 2000 In-Sight (insignia with cross-hairs) MVS-8000 OmniView PatFind PatFlex PatInspect PatMax PatQuick SensorView SmartLearn SmartView SMD4 UltraLight Vision Solutions VisionPro VisionView The following are trademarks of Cognex Corporation: 3D-Locate 3DMax CheckPoint Cognex VSoC FFD ilearn InspectEdge Legend LineMax NotchMax ProofRead SmartAdvisor SmartSync SmartSystem Other product and company names mentioned herein are the trademarks, or registered trademarks, of their respective owners. P a g e 3

4 Contents Configuration Codes... 6 Product Settings... 7 Reset... 8 Diagnostics... 9 Setup Light Aimer Trigger Type Global Shutter Emulation Custom Commands Maximum Exposure Symbology Settings D Symbology Settings D Symbology Settings Training Data Validation/Data Formatting Non-Printable Characters Wireless Buffering Power Management Wake-up Message PS/2 Keyboard Emulation Enable Mobile Computer Keyboard Emulation ASCII keyboard command codes USB Connection USB Mode Communication Settings RS-232 Baud Rate RS-232 Parity Settings RS-232 Databit Settings RS-232 Stopbit Settings RS-232 Handshaking RS-232 Routing Network Settings Decode Settings Master/Slave Keyboard Country P a g e 4

5 Contents Alt Key Combo Zero Padding USB Keyboard Inter-Character Delay Code Quality Settings P a g e 5

6 Configuration Codes Configuration Codes Configuration Codes are special Data Matrix codes to configure your reader without the Setup Tool. Lights and beeping indicate that a Configuration Code was read. Beeps can also indicate that a command has not been executed: if the code is read but the command is not executed (e.g. because of the command not being valid for the type of reader used for reading the code), the reader gives 2 beeps. You can read these codes without enabling the decoding of Data Matrix symbols. In such cases, make sure that you use Manual or Presentation trigger mode. Adjust focus settings if you have trouble reading Configuration Codes. NOTE: When using wireless handheld readers, the reader must be put on the base station for security reasons after reading a printed configuration code. P a g e 6

7 Product Settings Product Settings Reset Scanner to Factory Defaults Reset Code Quality Calibration DM100 DM8600 Reset Base Station to Factory Defaults P a g e 7

8 Reset Reset Reboot Scanner Reboot Base Station P a g e 8

9 Diagnostics Diagnostics Output Diagnostic String (only with RS-232 and USB connections) Output Diagnostic String (through the DM8000 Base Station with RS-232 and USB connections) DM8000 wireless P a g e 9

10 Setup Setup Enable Setup 1 Only DM8500 DM8600 Enable Setup 2 Only DM8500 DM8600 Enable Setup 3 Only DM8500 DM8600 Enable Setup 4 Only DM8500 DM8600 P a g e 10

11 Light Aimer Light Aimer *Light aimer ON (default for DMAE50, DM50, DM60, DM100, DM200, and DM8000) DM300 DM500 DM8000 *Light aimer OFF (default for DM300 and DM500) DM300 DM500 DM8000 P a g e 11

12 Trigger Type Trigger Type Enable Presentation *Enable Manual (button) (default for all devices except for DM500) Enable Single (external) DM300 DM500 DM503 Enable Burst (external) DM300 DM500 DM503 Enable Self (internal) DM300 DM500 DM503 *Enable Continuous (external) (default for DM500) DM300 DM500 DM503 P a g e 12

13 Global Shutter Emulation Global Shutter Emulation Enable Global Shutter Emulation DMAE50 *Disable Global Shutter Emulation DMAE50 P a g e 13

14 Custom Commands Custom Commands Enable Serial Trigger DM300 DM500 DM503 *Disable Serial Trigger DM300 DM500 DM503 Enable Echo Commands DM300 DM500 DM503 *Disable Echo Commands DM300 DM500 DM503 P a g e 14

15 Maximum Exposure Maximum Exposure 100 us DM50 DM60 DM300 DM500 DM503 DM us DM50 DM60 DM300 DM500 DM503 DM8000 *170 us (default for DM500) DM50 DM60 DM300 DM500 DM503 DM us DM50 DM60 DM300 DM503 DM us DM50 DM60 DM300 DM503 DM8000 P a g e 15

16 Maximum Exposure 800 us DM50 DM60 DM300 DM503 DM8000 *1000 us (default for DM50, DM60, DM300, and DM503) DM50 DM60 DM300 DM503 DM us DM50 DM60 DM503 DM us DM50 DM60 DM503 DM us DM50 DM60 DM503 DM us DM50 DM60 DM503 DM8000 P a g e 16

17 Maximum Exposure *13333 us (default for DM8000) DM50 DM60 DM503 DM us DM50 DM60 DM503 DM us DM50 DM60 DM503 DM8000 P a g e 17

18 Symbology Settings Symbology Settings *Enable ID Max DM50 DM60 DM100 DM200 DM300 DM500 DM503 Enable ID Quick DM50 DM60 DM100 DM200 DM300 DM500 DM503 *Enable Data Matrix (default for all devices except for DM500) *Disable Data Matrix (default for DM500) Enable QR Code *Disable QR Code P a g e 18

19 Symbology Settings Enable MaxiCode (Only supported on X models) DM50 DM60 DM300 DM500 DM503 DM8050 DM8600 *Disable MaxiCode (Only supported on X models) DM50 DM60 DM300 DM500 DM503 DM8050 DM8600 Enable Aztec Code DM300 DM503 DM8050 DM8600 *Disable Aztec Code DM300 DM503 DM8050 DM8600 *Enable Code 128 Disable Code 128 P a g e 19

20 Symbology Settings *Enable UPC/EAN Disable UPC/EAN *Enable Code 39 Disable Code 39 DMAE50 DM50 DM60 M100 DM200 DM300 DM500 DM503 DM700 DM8000 *Enable Code 93 (default for all devices except for DM500) *Disable Code 93 (default for DM500) P a g e 20

21 Symbology Settings Enable Interleaved 2 of 5 DM300 DM500 DM503 DM700 DM8000 *Disable Interleaved 2 of 5 *Enable Codabar (default for all devices except for DM500) *Disable Codabar (default for DM500) Enable Pharmacode *Disable Pharmacode P a g e 21

22 Symbology Settings *Enable PDF417 (default for handheld readers) *Disable PDF417 (default for fixed mount readers) Enable Databar *Disable Databar Enable Micro PDF417 *Disable Micro PDF417 DM300 DM500 DM503 DM700 DM8000 P a g e 22

23 Symbology Settings Enable EAN.UCC Composite *Disable EAN.UCC Composite Enable POSTNET *Disable POSTNET Enable PLANET *Disable PLANET P a g e 23

24 Symbology Settings Enable Japan Post *Disable Japan Post Enable Australia Post *Disable Australia Post Enable UPU *Disable UPU P a g e 24

25 Symbology Settings Enable Intelligent Mail Barcode *Disable Intelligent Mail Barcode DataMatrix Symbol Difficulty - Easy DM8100 DM8500 DM8600 *DataMatrix Symbol Difficulty - Medium DM8100 DM8500 DM8600 DataMatrix Symbol Difficulty - Hard DM8100 DM8500 DM8600 *QR Symbol Difficulty - Easy DM8100 DM8500 DM8600 P a g e 25

26 Symbology Settings QR Symbol Difficulty - Medium DM8100 DM8500 DM8600 QR Symbol Difficulty - Hard DM8100 DM8500 DM8600 P a g e 26

27 2D Symbology Settings 2D Symbology Settings Enable Extreme Print Growth (Data Matrix only) DMAE50 DM100 DM200 DM700 DM8100 DM8500 *Disable Extreme Print Growth (Data Matrix only) DMAE50 DM100 DM200 DM700 DM8100 DM8500 P a g e 27

28 1D Symbology Settings 1D Symbology Settings *Enable Use Target Decoding (simulates laser scanning) (default for handheld readers except for DM8000) DMAE50 DM100 DM200 DM700 DM8000 *Disable Use Target Decoding (simulates laser scanning) (default for fixed mount readers, DM8000, and ) DMAE50 DM100 DM200 DM700 DM8000 *Enable Short Quiet Zone DM300 DM500 DM503 DM700 DM8000 Disable Short Quiet Zone DM300 DM500 DM503 DM700 DM8000 Code Orientation: Omnidirectional DM50 DM60 DM300 DM500 DM503 P a g e 28

29 1D Symbology Settings Code Orientation: Ladder and Picket Fence DM50 DM60 DM300 DM500 DM503 Code Orientation: Ladder DM50 DM60 DM300 DM500 DM503 Code Orientation: Picket Fence (for readers which support oriented 1-D reading) DM50 DM60 DM300 DM500 DM503 *Enable HOTBARS DM500 Disable HOTBARS DM500 P a g e 29

30 Training Training Enable incremental training DM300 DM500 DM503 *Disable incremental training DM300 DM500 DM503 Enable untrained symbologies DM300 DM500 DM503 *Disable untrained symbologies DM300 DM500 DM503 P a g e 30

31 Data Validation/Data Formatting Data Validation/Data Formatting Enable DoD UID Validation with UII Output DM300 DM500 DM503 DM700 DM8000 *Disable DoD UID Validation with UII Output DM300 DM500 DM503 DM700 DM8000 Use Next Code As Match String (Enable Match String Validation prior to reading this code) DMAE50 DM50 DM60 DM100 DM200 DM300 DM500 DM503 DM700 DM8000 Enable Input 1 Save Match String DM50 DM60 DM300 DM500 DM503 *Disable Input 1 Save Match String DM50 DM60 DM300 DM500 DM503 P a g e 31

32 Data Validation/Data Formatting Enable Button Save Match String DM300 DM500 DM503 *Disable Button Save Match String DM300 DM500 DM503 P a g e 32

33 Non-Printable Characters Non-Printable Characters Enable Translate Unprintable Characters *Disable Translate Unprintable Characters P a g e 33

34 Wireless Wireless Unassign Reader from Base Station DM8000 Force Pairing Mode DM8050, DM8600 P a g e 34

35 Buffering Buffering *Enable Offline Buffering DM8000 Wireless Disable Offline Buffering DM8000 Wireless *Offline Buffering Mode - Multiple DM8000 Wireless Offline Buffering Mode - Single DM8000 Wireless P a g e 35

36 Power Management Power Management Disable Hibernation Mode DM8000 Wireless *Enable Hibernation Mode DM8000 Wireless Disable Power Off Mode DM8000 Wireless Enable Power Off Mode DM8000 Wireless P a g e 36

37 Wake-up Message Wake-up Message Enable Output Diagnostic String on Wake-up *Disable Output Diagnostic String on Wake-up P a g e 37

38 PS/2 Keyboard Emulation Enable PS/2 Keyboard Emulation Enable PS/2 Keyboard Emulation Enable DM50 DM700 DM8000 DO NOT scan this code when you have an actual keyboard connected. *PS/2 Keyboard Emulation Disable DM50 DM700 DM8000 Base Station PS/2 Keyboard Emulation Enable DO NOT scan this code when you have an actual keyboard connected. Base Station PS/2 Keyboard Emulation Disable P a g e 38

39 Mobile Computer Keyboard Emulation Mobile Computer Keyboard Emulation Mobile Computer Keyboard Emulation Enable *Mobile Computer Keyboard Emulation Disable P a g e 39

40 ASCII keyboard command codes ASCII keyboard command codes 1. Set the data formatting on the DataMan to "Full String". 2. Put the reader into keyboard mode and scan the code. The DataMan will execute this command. ENTER main ENTER, not numeric keypad ENTER ESCAPE BACKSPACE TAB ALT+A specifically the left ALT key ALT+B specifically the left ALT key ALT+C specifically the left ALT key P a g e 40

41 ASCII keyboard command codes ALT+D specifically the left ALT key ALT+E specifically the left ALT key ALT+F specifically the left ALT key ALT+G specifically the left ALT key ALT+H specifically the left ALT key ALT+I specifically the left ALT key ALT+J specifically the left ALT key ALT+K specifically the left ALT key P a g e 41

42 ASCII keyboard command codes ALT+L specifically the left ALT key ALT+M specifically the left ALT key ALT+N specifically the left ALT key ALT+O specifically the left ALT key ALT+P specifically the left ALT key ALT+Q specifically the left ALT key ALT+R specifically the left ALT key ALT+S specifically the left ALT key P a g e 42

43 ASCII keyboard command codes ALT+T specifically the left ALT key ALT+U specifically the left ALT key ALT+V specifically the left ALT key ALT+W specifically the left ALT key ALT+X specifically the left ALT key ALT+Y specifically the left ALT key ALT+Z specifically the left ALT key PRINTSCREEN P a g e 43

44 ASCII keyboard command codes F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 P a g e 44

45 ASCII keyboard command codes HOME ARROW UP PAGE UP ARROW LEFT ARROW RIGHT END ARROW DOWN PAGE DOWN INSERT DELETE P a g e 45

46 ASCII keyboard command codes GUI LEFT GUI RIGHT ALT+F1 specifically the left ALT key ALT+F2 specifically the left ALT key ALT+F3 specifically the left ALT key ALT+F4 specifically the left ALT key ALT+F5 specifically the left ALT key ALT+F6 specifically the left ALT key P a g e 46

47 ASCII keyboard command codes ALT+F7 specifically the left ALT key ALT+F8 specifically the left ALT key ALT+F9 specifically the left ALT key ALT+F10 specifically the left ALT key F11 F12 ALT+F11 specifically the left ALT key ALT+F12 specifically the left ALT key P a g e 47

48 ASCII keyboard command codes ALT+ENTER specifically the left ALT key and main ENTER CTRL+A specifically the right CTRL key CTRL+B specifically the right CTRL key CTRL+C specifically the right CTRL key CTRL+D specifically the right CTRL key CTRL+E specifically the right CTRL key CTRL+F specifically the right CTRL key CTRL+G specifically the right CTRL key P a g e 48

49 ASCII keyboard command codes CTRL+H specifically the right CTRL key CTRL+I specifically the right CTRL key CTRL+ specifically the right CTRL key CTRL+K specifically the right CTRL key CTRL+L specifically the right CTRL key CTRL+M specifically the right CTRL key CTRL+N specifically the right CTRL key CTRL+O specifically the right CTRL key P a g e 49

50 ASCII keyboard command codes CTRL+P specifically the right CTRL key CTRL+Q specifically the right CTRL key CTRL+R specifically the right CTRL key CTRL+S specifically the right CTRL key CTRL+T specifically the right CTRL key CTRL+U specifically the right CTRL key CTRL+V specifically the right CTRL key CTRL+W specifically the right CTRL key P a g e 50

51 ASCII keyboard command codes CTRL+X specifically the right CTRL key CTRL+Y specifically the right CTRL key CTRL+Z specifically the right CTRL key CTRL+F1 specifically the right CTRL key CTRL+F2 specifically the right CTRL key CTRL+F3 specifically the right CTRL key CTRL+F4 specifically the right CTRL key CTRL+F5 specifically the right CTRL key P a g e 51

52 ASCII keyboard command codes CTRL+F6 specifically the right CTRL key CTRL+F7 specifically the right CTRL key CTRL+F8 specifically the right CTRL key CTRL+F9 specifically the right CTRL key CTRL+F10 specifically the right CTRL key CTRL+F11 specifically the right CTRL key CTRL+F12 specifically the right CTRL key CTRL+ENTER specifically the right CTRL key and main ENTER P a g e 52

53 ASCII keyboard command codes CTRL specifically the right CTRL key SHIFT+F1 specifically the left SHIFT key SHIFT+F2 specifically the left SHIFT key SHIFT+F3 specifically the left SHIFT key SHIFT+F4 specifically the left SHIFT key SHIFT+F5 specifically the left SHIFT key SHIFT+F6 specifically the left SHIFT key SHIFT+F7 specifically the left SHIFT key P a g e 53

54 ASCII keyboard command codes SHIFT+F8 specifically the left SHIFT key SHIFT+F9 specifically the left SHIFT key SHIFT+F10 specifically the left SHIFT key SHIFT+F11 specifically the left SHIFT key SHIFT+F12 specifically the left SHIFT key SHIFT+ENTER specifically the left SHIFT key and main ENTER P a g e 54

55 USB Connection USB Connection *USB-COM/RS-232 DMAE50 DM50 DM60 DM100 DM700 DM8000 USB Keyboard DMAE50 DM50 DM60 DM100 DM700 DM8000 Enable USB Keyboard for the base station *Disable USB Keyboard for the base station Enable Enumerate in HID mode only Reboot needed for changing between HID and USB mode of base/reader! Disable Enumerate in HID mode only Reboot needed for changing between HID and USB mode of base/reader! P a g e 55

56 USB Mode USB Mode USB compatibility mode enabled DMAE50 DM50 DM60 DM100 DM700 DM8000 *USB compatibility mode disabled DMAE50 DM50 DM60 DM100 DM700 DM8000 USB compatibility mode enabled USB compatibility mode disabled USB 2.0 mode DM8000 P a g e 56

57 USB Mode *USB 1.1 mode DM8000 USB 2.0 mode on base station *USB 1.1 mode on base station P a g e 57

58 Communication Settings Communication Settings *Enable DHCP (default for all Ethernet readers) DMAE50 DM60 DM200 DM300 DM500 DM503 DM8000 DO NOT SCAN this code with a DM8000 wireless reader. Enable Multi-Port (RS-232 Sharing) DM50 DM60 DM100 DM200 DM300 DM500 DM503 *Disable Multi-Port (RS-232 Sharing) DM50 DM60 DM100 DM200 DM300 DM500 DM503 Enable EtherNet/IP DM60 DM200 DM300 DM500 DM503 DM8000 (corded) Enable EtherNet/IP (DM8000 wireless) P a g e 58

59 Communication Settings *Disable EtherNet/IP DM60 DM200 DM300 DM500 DM503 DM8000 (corded) *Disable EtherNet/IP (DM8000 wireless) Enable PROFINET DM60 DM200 DM300 DM500 DM503 DM8000 (corded) Enable PROFINET (DM8000 wireless) *Disable PROFINET DM60 DM200 DM300 DM500 DM503 DM8000 (corded) *Disable PROFINET (DM8000 wireless) P a g e 59

60 Communication Settings Enable SLMP Protocol DM60 DM200 DM300 DM500 DM503 DM8000 (corded) Enable SLMP Protocol (DM8000 wireless) *Disable SLMP Protocol DM60 DM200 DM300 DM500 DM503 DM8000 (corded) *Disable SLMP Protocol (DM8000 wireless) Enable Modbus TCP DM60 DM200 DM300 DM500 DM503 DM8000 (corded) Enable Modbus TCP (DM8000 wireless) P a g e 60

61 Communication Settings *Disable Modbus TCP DM60 DM200 DM300 DM500 DM503 DM8000 (corded) *Disable Modbus TCP (DM8000 wireless) P a g e 61

62 RS-232 Baud Rate RS-232 Baud Rate 9600 BPS DM300 DM500 DM503 DM700 DM8000 (corded) 9600 BPS (DM8000 wireless) BPS DM300 DM500 DM503 DM700 DM8000 (corded) BPS (DM8000 wireless) BPS DM300 DM500 DM503 DM700 DM8000 (corded) BPS (DM8000 wireless) P a g e 62

63 RS-232 Baud Rate *57600 BPS (default for DMAE50, DM300, and DM8000) DM300 DM500 DM503 DM700 DM8000 (corded) BPS (DM8000 wireless) * BPS (default for DM50, DM60, DM100, DM200, DM500, DM503, and DM700) DM50 DM60 DM100 DM200 DM300 DM500 DM503 DM700 DM8050 DM8600 P a g e 63

64 RS-232 Parity Settings RS-232 Parity Settings None All readers None (DM8000 wireless) Odd All readers Odd (DM8000 wireless) Even All readers P a g e 64

65 RS-232 Parity Settings Even (DM8000 wireless) Mark DM8050 DM8600 Mark (DM8000 wireless) Space DM8050 DM8600 Space (DM8000 wireless) P a g e 65

66 RS-232 Databit Settings RS-232 Databit Settings Databit 7 DM300 DM500 DM503 DM700 DM7500 DM8000 (corded) Databit 7 (DM8000 wireless) Databit 8 DM300 DM500 DM503 DM700 DM7500 DM8000 (corded) Databit 8 (DM8000 wireless) P a g e 66

67 RS-232 Stopbit Settings RS-232 Stopbit Settings Stopbit 1 DM300 DM500 DM503 DM700 DM7500 DM8000 (corded) Stopbit 1 (DM8000 wireless) Stopbit 2 DM300 DM500 DM503 DM700 DM7500 DM8000 (corded) Stopbit 2 (DM8000 wireless) P a g e 67

68 RS-232 Handshaking RS-232 Handshaking *RTS/CTS Off DMAE50 DM7500 DM8000 (corded) RTS/CTS Off (DM8000 wireless) RTS/CTS On DMAE50 DM7500 DM8000 (corded) RTS/CTS On (DM8000 wireless) P a g e 68

69 RS-232 Routing RS-232 Routing *Route to associated reader DM8000 (wireless) Route to base station DM8000 (wireless) P a g e 69

70 Network Settings Network Settings Enable Network Client DM60 DM300 DM500 DM503 DM8000 *Disable Network Client DM60 DM300 DM500 DM503 DM8000 P a g e 70

71 Decode Settings Decode Settings *Never Read the Same Code Twice Off DM50 DM60 DM300 DM500 DM503 DM8000 Never Read the Same Code Twice On DM50 DM60 DM300 DM500 DM503 DM8000 P a g e 71

72 Master/Slave Master/Slave Enable MST DM60 DM300 DM500 DM503 *Disable MST DM60 DM300 DM500 DM503 Select Reader as Master DM60 DM300 DM500 DM503 Deselect Reader as Master DM60 DM300 DM500 DM503 P a g e 72

73 Keyboard Country Keyboard Country *USA DMAE50 DM50 DM100 DM700 DM8000 *USA (DM8000 wireless) Germany DMAE50 DM50 DM100 DM700 DM8000 Germany (DM8000 wireless) France DMAE50 DM50 DM100 DM700 DM8000 France (DM8000 wireless) P a g e 73

74 Keyboard Country Spain DMAE50 DM50 DM100 DM700 DM8000 Spain (DM8000 wireless) Japan DMAE50 DM50 DM100 DM700 DM8000 Japan (DM8000 wireless) Norway DMAE50 DM50 DM100 DM700 DM8000 Norway (DM8000 wireless) P a g e 74

75 Keyboard Country Finland DMAE50 DM50 DM100 DM700 DM8000 Finland (DM8000 wireless) Alt Key Combo DMAE50 DM50 DM100 DM700 DM8000 Alt Key Combo (DM8000 wireless) P a g e 75

76 Alt Key Combo Zero Padding Alt Key Combo Zero Padding *Enable Alt Key Combo Zero Padding DMAE50 DM50 DM100 DM700 DM8000 *Enable Alt Key Combo Zero Padding (DM8000 wireless) Disable Alt Key Combo Zero Padding DMAE50 DM50 DM100 DM700 DM8000 Disable Alt Key Combo Zero Padding (DM8000 wireless) P a g e 76

77 USB Keyboard Inter-Character Delay USB Keyboard Inter-Character Delay *100 ms OFF DMAE50 DM50 DM100 DM700 DM ms ON DMAE50 DM50 DM100 DM700 DM8000 *0 ms OFF 100 ms ON P a g e 77

78 Code Quality Settings Code Quality Settings Code Quality On DM100 *Code Quality Off DM100 *Enable Bright Field Diffuse Perpendicular (90) DM100 Disable Bright Field Diffuse Perpendicular (90) DM100 *Enable Dark Field 30 Degree All Quadrants (30Q) DM100 Disable Dark Field 30 Degree All Quadrants (30Q) DM100 P a g e 78

79 Code Quality Settings *Enable Dark Field 30 Degree E-W Quadrants (30T) DM100 Disable Dark Field 30 Degree E-W Quadrants (30T) DM100 *Enable Dark Field 30 Degree N-S Quadrants (30T) DM100 Disable Dark Field 30 Degree N-S Quadrants (30T) DM100 Enable Custom Light Configuration DM100 *Disable Custom Light Configuration DM100 * - default setting P a g e 79