Code Reader 900FD Configuration Guide
|
|
- Emil Copeland
- 6 years ago
- Views:
Transcription
1 Code Reader 900FD Configuration Guide 1
2 Table of Contents Reader Settings Save Settings...5 (A1) Reader ID and Firmware Version... 5 (A2) Feedback Settings Beep On...5 (A3) Beep Off...5 (A4) Targeting Targeting On... 5 (B2) Targeting Off...5 (B1) Continuous Trigger Optimization and Settings Continuous Scan Off - Default...5 (B3) Continuous Scan On...5 (B4) Motion Detection Scanning Motion Detection On, Start Delay 0 - Default... 5 (C1) Motion Detection On, Start Delay 500ms... 5 (C2) Motion Detection On, Start Delay 0, Dark Environment... 5 (C3) Motion Detection On, Start Delay 500ms, Dark Environment... 5 (C4) Motion Detection Off... 5 (D1) Enable Motion detection with Stand detection - Default... 5 (D2) Disable Motion detection with Stand detection... 5 (D3) Scan Delay Duplicate Scan Disabled...5 (E1) 1 sec Duplicate Scan Delay... 5 (E2) 2 sec Duplicate Scan Delay... 5 (E3) 3 sec Duplicate Scan Delay... 5 (E4) Default Trigger Delay...5 (F1) USB Settings USB Keyboard Mode...6 (A2) USB Downloader Mode...6 (A3) USB Virtual COM One Way Mode...6 (A4) USB Native Two Way Mode...6 (B1) Reset to USB Factory Defaults...6 (B2) RS-232 Settings RS-232 Raw Mode... 6 (C1) RS-232 Packet Mode... 6 (C2) Reset to RS-232 Factory Defaults... 6 (C3) - 7 Data Bits... 6 (C4) - 8 Data Bits - Default... 6 (D1) Baud Rate... 6 (D2) Baud Rate... 6 (D3) Baud Rate... 6 (D4) Baud Rate...6 (E1) Baud Rate...6 (E2) Baud Rate...6 (E3) 2
3 Table of Contents Baud Rate...6 (E4) Baud Rate - Default...6 (F1) - Even Parity...6 (F2) - Odd Parity...6 (F3) - No Parity - Default...6 (F4) Prefix/Suffix Settings Prefix - Comma... 7 (A1) Prefix - Space... 7 (A2) Prefix - Tab (USB Keyboard Mode ONLY)... 7 (A3) Prefix - Tab (RS-232 Mode ONLY)... 7 (A4) Prefix - CRLF (RS-232 Mode ONLY)... 7 (B1) Prefix - Erase/None - Default... 7 (B2) Suffix - Line Feed (RS-232 Mode ONLY)...7 (C1) Suffix - Carriage Return Line Feed (RS-232 Mode ONLY)...7 (C2) Suffix - Carriage Return (RS-232 Mode ONLY)...7 (C3) Suffix - Tab (RS-232 Mode ONLY)...7 (C4) Suffix - Space...7 (D1) Suffix - Comma...7 (D2) Suffix - Enter (USB Keyboard Mode ONLY)...7 (D3) Suffix - Tab (USB Keyboard Mode ONLY)...7 (D4) Suffix - Erase/None - Default... 7 (E3) Erase Prefix & Suffix Data... 7 (E4) Symbologies Aztec On - Default (Aztec Code defaults to ON after purchasing/scanning a valid license and rebooting the CR900FD)...8 (A1) Aztec Off...8 (A2) Aztec Inverse On...8 (A3) Aztec Inverse & Normal...8 (A4) Codabar On - Default...8 (B2) Codabar Off...8 (B3) Code 39 On - Default...8 (B4) Code 39 Off... 8 (C1) Code 39 Enable Checksum... 8 (C2) Code 39 Disable Checksum - Default... 8 (C3) Code 39 Enable Checksum and Strip... 8 (C4) Code 39 Extended Full ASCII On... 8 (D1) Code 39 Extended Full ASCII Off - Default... 8 (D2) Code 93 On - Default... 8 (D3) Code 93 Off... 8 (D4) Code 128 On - Default...8 (E1) Code 128 Off...8 (E2) Data Matrix ON - Default (Data Matrix defaults to ON after purchasing/scanning a valid license and rebooting the CR900FD). Data Matrix cannot be disabled because Data Matrix bar codes are used for configuration, but will not scan non-configuration Data Matrix bar codes without a valid license. Data Matrix Rectangle On...8 (E3) Data Matrix Rectangle Off - Default...8 (E4) Data Matrix Inverse On...8 (F1) Data Matrix Inverse Off - Default...8 (F2) GS1 DataBar Limited On...8 (F3) GS1 DataBar 14/ Truncated 14 On...8 (F4) GS1 DataBar Stacked On...9 (A1) 3
4 Table of Contents GS1 DataBar Expanded On...9 (A2) All GS1 DataBar On - Default...9 (A3) All GS1 DataBar Off...9 (A4) PDF 417 On - Default (PDF417 defaults to ON after purchasing/scanning a valid license and rebooting the CR900FD)...9 (B3) PDF 417 Off...9 (B4) QR Code On - Default (QR Code defaults to ON after purchasing/scanning a valid license and rebooting the CR900FD)... 9 (C1) QR Code Off... 9 (C2) QR Code Enable Checksum... 9 (C3) QR Code Disable Checksum... 9 (C4) QR Code Inverse and Standard On... 9 (D1) QR Code Inverse On... 9 (D2) Enable All QR Code On (includes Micro QR)... 9 (D3) Inverse and Micro QR Code On... 9 (D4) UPC On - Default...9 (E1) UPC Off...9 (E2) UPC Extension On...9 (E3) UPC Extension Off - Default...9 (E4) Keyboard Mapping US English Keyboard Mapping - Default No Leading (A1) US English Keyboard Mapping - Leading (A2) Swiss Keyboard...10 (A3) Japanese Keyboard...10 (A4) Belgium Keyboard...10 (B1) French Keyboard...10 (B2) German Keyboard...10 (B3) Universal Keyboard Mapping...10 (B4) Control Characters for Non Printable ASCII (C1) Reader Text Commands Reader Text Commands On (C2) Reader Text Commands Off - Default (C3) Operating System Settings Enable Alternative OS (Windows CE/MAC/Linux) (D1) Disable Alternative OS (D2) Clear Reader Clear All Stored Data and Images (D3) Clear all JavaScript Rules (D4) 4
5 Save Settings Reader ID and Firmware Version Beep On Beep Off Targeting On Targeting Off Continuous Scan Off - Default Continuous Scan On Motion Detection On, Start Delay 0 - Default Motion Detection On, Start Delay 500ms Motion Detection On, Start Delay 0, Dark Environment Motion Detection On, Start Delay 500ms, Dark Environment Motion Detection Scanning Off Enable Motion detection with Stand detection - Default Disable Motion detection with Stand detection Duplicate Scan Disabled 1 sec Duplicate Scan Delay 2 sec Duplicate Scan Delay 3 sec Duplicate Scan Delay Default Trigger Delay 5
6 USB Keyboard Mode USB Downloader Mode USB Virtual COM - One Way Mode USB Native Two Way Mode Reset to USB Factory Defaults RS-232 Raw Mode RS-232 Packet Mode Reset to RS-232 Factory Defaults 7 Data Bits 8 Data Bits - Default 1200 Baud Rate 2400 Baud Rate 4800 Baud Rate 9600 Baud Rate Baud Rate Baud Rate Baud Rate Baud Rate - Default Even Parity Odd Parity No Parity - Default 6
7 Prefix - Comma Prefix - Space Prefix - Tab (USB Keyboard Mode ONLY) Prefix - Tab (RS-232 Mode ONLY) Prefix - CRLF RS-232 Only Prefix - Erase/None - Default Suffix - Line Feed RS-232 Mode Only Suffix - Carriage Return Line Feed RS-232 Mode Only Suffix - Carriage Return RS-232 Mode Only Suffix - Tab (RS-232 Mode Only) Suffix - Space Suffix - Comma Suffix - Enter USB Keyboard Mode Only Suffix - Tab USB Keyboard Mode Only Suffix - Erase/None - Default Erase Prefix & Suffix Data 7
8 Aztec On - Default (Included after purchasing Aztec license) Aztec Off Aztec Inverse On (Included after purchasing Aztec license) Aztec Inverse & Normal (Included after purchasing Aztec license) Codabar On - Default Codabar Off Code 39 On - Default Code 39 Off Code 39 Enable Checksum Code 39 Disable Checksum - Default Code 39 Enable Checksum and Strip Code 39 Extended Full ASCII On Code 39 Extended Full ASCII Off - Default Code 93 On - Default Code 93 Off Code 128 On - Default Code 128 Off Data Matrix Rectangle On (Included after purchasing Data Matrix license) Data Matrix Rectangle Off - Default Data Matrix Inverse On (Included after purchasing Data Matrix license) Data Matrix Inverse Off - Default GS1 DataBar Limited On GS1 DataBar 14/ Truncated 14 On 8
9 GS1 DataBar Stacked On GS1 DataBar Expanded On All GS1 DataBar On - Default All GS1 DataBar Off PDF 417 On - Default (Included after purchasing PDF 417 license) PDF 417 Off QR Code On - Default (Included after purchasing QR Code license) QR Code Off QR Code Enable Checksum QR Code Disable Checksum QR Code Inverse and Standard On (Included after purchasing QR Code license) QR Code Inverse On (Included after purchasing QR Code license) Enable All QR Code On (Included after purchasing QR Code license) Inverse and Micro QR Code On (Included after purchasing QR Code license) UPC On - Default UPC Off UPC Extension On UPC Extension Off - Default 9
10 US English Keyboard Mapping - Default No Leading 0 US English Keyboard Mapping - Leading 0 Swiss Keyboard Japanese Keyboard Belgium Keyboard French Keyboard German Keyboard Universal Keyboard Mapping Control Characters for Non Printable ASCII Reader Text Commands On Reader Text Commands Off - Default Enable Alternative OS (Windows CE/MAC/Linux) Disable Alternative OS Clear All Stored Data and Images Clear All JavaScript Rules 10
Code Reader 1000/1400/8000 Configuration Guide
Code Reader 1000/1400/8000 Configuration Guide Code Reader 1000 Code Reader 1400 Code Reader 8000 1 Table of Contents USB Settings USB Keyboard Mode...6 (A1) USB Downloader Mode...6 (A2) USB Virtual COM
More informationCode Reader 1000/1400/8000 Configuration Guide
Code Reader 1000/1400/8000 Configuration Guide Code Reader 1000 Code Reader 1400 Code Reader 8000 1 Table of Contents USB Settings USB Keyboard Mode...6 (A1) USB Downloader Mode...6 (A2) USB Virtual COM
More information2D Scan Engine Confguration Guide. 2D Barcode Scanner Configration Guide
2D Barcode Scanner Configration Guide 1 Table of Contents USB Settings USB Keyboard Mode...6 (A1) USB Downloader Mode...6 (A2) USB Virtual COM One Way Mode...6 (A3) USB Native Two Way Mode...6 (A4) USB
More informationConfiguration Guide. Code Reader C005435_02_CR1000_CR8000_ConfigurationGuide 1
Code Reader 1000/8000 Configuration Guide Code Reader 1000 Code Reader 8000 C005435_02_CR1000_CR8000_ConfigurationGuide 1 Table of Contents USB Settings USB Keyboard Mode...6 (A1) USB Downloader Mode...6
More informationCode Reader 2300/2600 Configuration Guide
Code Reader 2300/2600 Configuration Guide 1 Table of Contents Modem Settings (for use with the Charging Station with an Embedded CodeXML Modem or the external CodeXML M3 Modem when paired with a CR2300/CR2600)
More informationCode Reader 2300/2600/3600/CR3600 DPM Configuration Guide
Code Reader 2300/2600/3600/CR3600 DPM Configuration Guide 1 Table of Contents Modem Settings (for use with the Charging Station with an Embedded CodeXML Modem or the external CodeXML M3 Modem when paired
More informationCode Reader 4100 Configuration Guide
Code Reader 4100 Configuration Guide C006013_01_CR4100_ConfigurationGuide 1 Table of Contents Symbologies Aztec On - Default...5 (A1) Aztec Off...5 (A2) Aztec Inverse On...5 (A3) Aztec Inverse & Normal...5
More informationCR2300 CR2600 CR3600 (DPM)
CONFIGURATION GUIDE ENGLISH CR2300 CR2600 CR3600 (DPM) CONFIGURATION GUIDE: VERSION 12 SUPPORTED FIRMWARE: READERS 0956+, MODEM 2000+ RELEASE DATE: SEPTEMBER 2014 www.codecorp.com User Manuals YouTube.com/codecorporation
More informationSIMATIC Ident Handheld reading systems SIMATIC MV325 Configuration guide Compact User Manual
SIMATIC Ident Handheld reading systems Compact User Manual Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to
More informationCONFIGURATION GUIDE ID-110
CONFIGURATION GUIDE ID-110 HSD 0320.011 / 09.17-V01de Table of content Bluetooth Settings 7 Bluetooth Radio Disconnect (Reconnect via Quick Connect Barcode) 7 () Bluetooth Auto Reconnect - Default 7 ()
More informationAPPENDIX E COMMAND BARCODES
APPENDIX E COMMAND BARCODES Scan command barcode(s) to quickly configure the CHS 7X or 7XRx. By default, the CHS is in HID mode as a Keyboard device. IMPORTANT! Make sure the CHS is not connected to a
More informationDisclaimer. Please read through the manual carefully before using the product and operate it
ONEBRAND,ONESOLUTI ON 2D Handhel dbar codescanner UserManual Disclaimer Please read through the manual carefully before using the product and operate it according to the manual. It is advised that you
More informationFD-011WU. 2D Barcode Reader User Guide V1.6CC
FD-011WU 2D Barcode Reader User Guide V1.6CC Table of Contents 1 Getting Started... 1 1.1 Factory Defaults... 1 2 Communication Interfaces...2 2.1 TTL-232 Interface... 2 2.2 Baud Rate... 3 2.3 Data Bit
More informationFACTORY AUTOMATION MANUAL ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD HANDHELD - HIGH DENSITY
FACTORY AUTOMATION MANUAL ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD HANDHELD - HIGH DENSITY With regard to the supply of products, the current issue of the following document is applicable: The General Terms
More informationFactory Default Configuration. Factory Default Configuration
Factory Default Configuration Trigger Mode Terminator Factory Default Configuration Setup Code *open Parameter code close Parameter code Product information 1. Serial Port Using Serial Portread moudle
More informationMK D Imager Barcode Scanner Configuration Guide
MK-5500 2D Imager Barcode Scanner Configuration Guide V1.4 Table of Contents 1 Getting Started... 3 1.1 About This Guide... 3 1.2 Barcode Scanning... 3 1.3 Factory Defaults... 3 2 Communication Interfaces...
More information2D Imaging Barcode Scanner GLLS. Programming Guide. Advanced Handheld High-Speed Laser Scanner
2D Imaging Barcode Scanner GLLS Programming Guide 1 Advanced Handheld High-Speed Laser Scanner Revision History Changes to the original manual are listed below: Version Date Description of Version 1.0
More information2D Barcode Reader User Guide V 1.2.1
2D Barcode Reader User Guide V 1.2.1 Table of Contents 1 Getting Started... 3 1.1 About This Guide... 3 1.2 Barcode Scanning... 3 1.3 Factory Defaults... 3 1.4 Firmware Version Number... 3 2 Communication
More information2D Image Barcode Scanner Use Manual V1.0
2D Image Barcode Scanner Use Manual V1.0 Contents Chapter 1 Factory Default... 3 1. Factory Default... 3 Chapter 2 Interface... 4 1. RS-232...... 4 1.1 Baud Rate...... 4 1.2 Parity Check & Stop Bit & Data
More informationGS500 2D Area-Imaging Scanner. User Manual
GS500 2D Area-Imaging Scanner User Manual Table of Contents Table Of Contents... 1 Chapter 1 Getting Started... 6 About This Guide... 6 Barcode Scanning... 6 Barcode Programming... 6 Factory Defaults...
More information1D/2D IMAGER MODELS - 7Qi, 7Xi, D750
COMMAND BARCODES 1D/2D IMAGER MODELS - 7Qi, 7Xi, D750 This document pertains to the following 7Qi, 7Xi, D750: Model P/N 7Qi Blue 8550-00081 7Qi Gray 8550-00078 7Qi Green 8550-00090 7Qi Red 8550-00080 7Qi
More informationUser Manual. Code Reader 1200 Code Reader Manual Version 6. C003525_06_CR1200_User_Manual Release Date: 3/16/091.
User Manual Code Reader 1200 Code Reader 1210 Manual Version 6 C003525_06_CR1200_User Manual C003525_06_CR1200_User_Manual Release Date: 3/16/091 Statement of Agency Compliance The CR1200 has been tested
More informationBarcode BC-29. Decoder & Platform. Programming Manual
Barcode BC-29 Decoder & Platform Programming Manual CONTENTS Getting Started...2 Setting Procedures...3 Setting Flow Chart......4 Group 1 : Multi Validation....5 Group 2 : Hold Time...6 Group 3: Scan Mode
More informationPOWERSCAN D8590 User s Manual
POWERSCAN D8590 User s Manual P/N 83-336170 Rev A Copyright and Disclaimer Copyright 2013 Datalogic S.p.A. All rights reserved. The information contained herein is proprietary and is provided solely for
More informationRT206 User Guide. RT206 OEM 2d Scan Engine User Guide
RT206 OEM 2d Scan Engine User Guide Table Of Contents Chapter 1 Getting Started... 1 About This Guide... 1 Connecting EVK to PC... 1 Barcode Programming... 2 Factory Defaults... 2 Custom Defaults... 3
More informationIf you want to do other configurations please refer to below programming barcodes.
NT-1202 Quick Setup Guide This is 1D&2D plug and play model if you use a US keyboard. If you use other type of keyboard, plug the USB cable on your device, setup keyboard language before you use it. (refer
More informationmarson MT8200S 2D Handheld Scanner User Manual V / 6 / 25 - I -
marson MT8200S 2D Handheld Scanner User Manual V1.1 2018 / 6 / 25 - I - Table of Contents 1 Gettting Started...1 1.1 Introduction...1 1.2 Configuring MT8200S...1 1.2.1 Barcode Configurability...1 1.2.2
More informationPOSSAFE LQ300 BARKOD OKUYUCU. Configuration Manual
POSSAFE LQ300 BARKOD OKUYUCU Configuration Manual System function setting Factory Default setting All scanners have a factory default settings, scan "Factory Default "bar code, will make the scanner all
More informationCCD Barcode Scanner User Manual
CCD Barcode Scanner User Manual Introduction This product is 1D CCD barcode scanner, also known as barcode reader or barcode gun scanner, is a technical equipment to read barcode information, by adopting
More informationFACTORY AUTOMATION MANUAL ODT-HH-MAH120-HD HANDHELD - HIGH DENSITY
FACTORY AUTOMATION MANUAL ODT-HH-MAH120-HD HANDHELD - HIGH DENSITY With regard to the supply of products, the current issue of the following document is applicable: The General Terms of Delivery for Products
More informationIPDA014-2D. Embedded 2D Barcode Scan Engine. User Guide
IPDA014-2D Embedded 2D Barcode Scan Engine User Guide 1 Table Of Contents Chapter 1 Getting Started...8 Introduction...8 About This Guide...8 Barcode Scanning...9 Barcode Programming...9 Factory Defaults...9
More informationRT209 OEM 2d Scan Engine User Guide
RT209 OEM 2d Scan Engine User Guide Table Of Contents Chapter 1 Getting Started... 1 About This Guide... 1 Connecting EVK to PC... 1 Barcode Scanning... 1 Barcode Programming... 1 Custom Defaults... 3
More information2D Imaging Barcode Scanner GLLS. Programming Guide. Advanced Handheld High-Speed Laser Scanner
2D Imaging Barcode Scanner GLLS Programming Guide 1 Advanced Handheld High-Speed Laser Scanner Revision History Changes to the original manual are listed below: Version Date Description of Version 1.0
More informationThis configuration including four steps. Please scan below codes one by one.
Bluetooth Wireless Barcode Scanner Overview Netum bluetooth wireless model integrates a high-performance processer with an effective decoding board, combining a fast decoding speed. High precision and
More informationHS-2D Handheld Reader User s Manual
HS-2D Handheld Reader User s Manual P/N 83-100002 Rev A Copyright and Disclaimer Copyright 2011 Microscan Systems, Inc., 1201 S.W. 7th Street, Renton, WA, U.S.A. 98057 (425) 226-5700 FAX: (425) 226-8682
More informationPowerScan PD8590-DPM Imager Industrial Corded Handheld Bar Code Reader
PowerScan PD8590-DPM Imager Industrial Corded Handheld Bar Code Reader User s Manual Datalogic ADC, Inc. 959 Terry Street Eugene, OR 97402 USA Telephone: (541) 683-5700 Fax: (541) 345-7140 2013 Datalogic,
More informationNCR Realscan 7837 High-Performance Scanners. User s Guide Issue A
NCR Realscan 7837 High-Performance Scanners User s Guide 497-0427357 Issue A Table of Contents Chapter 1 - Getting Started About This Manual... 1-1 Unpacking the Scanner... 1-2 RealScan 7837 High-Performance
More informationBD-6500BT Bluetooth 2D Barcode Scanner Configuration Guide
BD-6500BT Bluetooth 2D Barcode Scanner Configuration Guide V 2.1 Table of Contents 1 Getting Started. 3 1.1 About This Guide.. 3 1.2 Barcode Scanning.. 3 1.3 Factory Defaults.. 3 1.4 Pairing Cradle 4 1.5
More informationThis confirguration including four steps,please scan below codes one by one.
Wireless 2D Barcode Scanner Overview Netum wireless 2D model integrates a high-performance processer with an effective decoding board, combining a fast decoding speed. High precision and a high anti-interference
More information2D Wired Barcode Scanner Overview
2D Wired Barcode Scanner Overview Netum wired 2D Plug and Play barcode scanner integrates a high performance processer with an effective decoding board, combining a fast decoding speed. IP67 waterproof
More information1D IMAGER MODELS - 7Ci, 7Di, D700
COMMAND BARCODES 1D IMAGER MODELS - 7Ci, 7Di, D700 This document pertains to the following 7Ci, 7Di, D700: The part number (P/N) is labeled inside the battery compartment for the CHS 7 Series. Ci Di Model
More informationNuscan 3200 Optical Laser Barcode Scanner
Nuscan 3200 Optical Laser Barcode Scanner Programming Manual FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
More information2D barcode scanner User Manual
2D barcode scanner User Manual V1.1 2013/06/08 Table of Contents Introduction... 4 Interface Settings... 4 RS232 Serial Port... 4 USB Interface Settings... 5 RS232 Settings... 6 Keyboard Settings... 9
More informationKeyboard Language In order to let scanner upload the codes in a correct way, you have to set the keyboard language before you use it.
2.4G Wireless Barcode Scanner Overview Netum 2.4G wireless model integrates a high-performance processer with an effective decoding board, combining a fast decoding speed. High precision and a high anti-interference
More informationIf you want to do other configurations please refer to below programming barcodes.
NT-M3 Quick Setup Guide This is a plug and play model if you use a US keyboard. If you use other type of keyboard, plug the USB cable on your device, setup keyboard language before you use it. (refer to
More informationBARCODE SCANNER. Configuration Guide - 1 -
BARCODE SCANNER Configuration Guide - 1 - Table of Contents Chapter 1 System Information 1.1 About this manual 3 1.2 How to set up the parameter 3 1.3 How to set up the parameter - II 4 Chapter 2 System
More informationOmni-Directional Barcode Scanner Model No. OM7120
Omni-Directional Barcode Scanner Model No. OM7120 User s Manual Programming with barcodes The BARCODE PROGRAMMING feature gives the possibility to change scanner settings without any tools or dismounting
More informationMD65xx Image Barcode Scanner
MD65xx Image Barcode Scanner User Manual Version: MD65xx_UM_EN_V1.1.1 Warning: Ensure that the optional DC adapter works at +5V, especially for the RS-232 interface cable. NOTICE: 1. All software, including
More informationXL D Barcode Scanner User's Manual V1.0
XL-3100 2D Barcode Scanner User's Manual V1.0 Table of Contents Revision History...-3- Chapter 1 Getting Started... 1 Introduction... 1 About This Guide... 2 Barcode Scanning... 2 Configuring the XL-3100...
More informationNLS-EM3096. OEM Scan Engine. User Guide
NLS-EM3096 OEM Scan Engine User Guide Disclaimer 2014-2018 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and operate it according
More informationProgramming with barcodes
Configuration Guide Programming with barcodes The BARCODE PROGRAMMING feature gives the possibility to change the Scantech scanner settings without any tools or dismounting the scanner from the check stand.
More informationWireless Pocket 2D Imager Scanner
Wireless Pocket 2D Imager Scanner - MS920P - User's Manual Version 1.0 2014 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. Table
More informationREADER MAH 100 TECHNICAL MANUAL READER MAH 100
READER MAH 100 TECHNICAL MANUAL Designation of this documentation: Technical manual for the Reader MAH 100 Version of the described product: 1.0 Editorial version of this documentation: 09/02 Copyright
More informationIf you want to have other configurations please refer to below programming barcodes. Check Scanner Version
NT-1228BL V18.7.12 Quick Setup Guide This model can work both via USB cable or via bluetooth. Connection Mode Working via USB cable Get Started: Connect scanner with your device via USB cable. If you use
More informationUser Manual. Part Number K11020, Rev. E, August 3, 2007 This version of the manual supports firmware and greater.
User Manual Part Number K11020, Rev. E, August 3, 2007 This version of the manual supports firmware 3.1.1000 and greater. K11020 VisionSensor 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3,
More information2D Wired Barcode Scanner Overview. Keyboard Language In order to let scanner upload the codes in a correct way, you have to set the keyboard language.
2D Wired Barcode Scanner Overview Netum wired 2D Plug and Play barcode scanner integrates a high-performance processer with an effective decoding board, combining a fast decoding speed.the device can easily
More informationSCANNING MADE SIMPLE. EM3296 OEM scan engine user guide
SCANNING MADE SIMPLE EM3296 OEM scan engine user guide Disclaimer 2016-2017 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product
More informationEM3296. OEM Scan Engine User Guide
EM3296 OEM Scan Engine User Guide Disclaimer 2016-2017 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and operate it according
More informationArea Imager Bar Code Scanner 2 D C O N F I G U R A T I O N G U I D E
Area Imager Bar Code Scanner 2 D C O N F I G U R A T I O N G U I D E Copyright @ 2017 This manual is copyrighted, with all right reserved. Under the copyright laws, this manual may not, in whole or in
More informationTable of contents. Change scanner settings Factory default settings Default message format Programming flow chart
Table of contents Change scanner settings Factory default settings Default message format Programming flow chart 1. General 1.1 Open programming mode or Close programming mode with update 1.2 Close programming
More informationNLS-EM3096. OEM Scan Engine. User Guide
NLS-EM3096 OEM Scan Engine User Guide Disclaimer 2014-2016 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and operate it according
More informationModel HP ElitePOS 2D Barcode Scanner (Black) HP ElitePOS 2D Barcode Scanner (White)
Overview Model (Black) (White) 1RL97AA 3GS20AA Introduction Deliver an efficient customer experience with the breathtaking, HP s smallest, slimmest barcode scanner, designed to complement the HP ElitePOS.
More informationInnovation By Design
Innovation By Design LAZERLOGIC LL2424 Programme Manual 01256 840927 @ sales@lazerlogic.com Kensington House, 21 Mill Road, Basingstoke, Hampshire RG24 9SN Enter/Exit Programming Mode ( represents the
More informationNT-1228BL. Quick Setup Guide V Connection Mode. Working via Bluetooth. Barcode Programming
NT-1228BL V18.7.12 Quick Setup Guide This model can work both via USB cable or via bluetooth. Connection Mode Working via USB cable Get Started: Connect scanner with your device via USB cable. If you use
More informationNLS-EM3070. OEM Scan Engine. User Guide
NLS-EM3070 OEM Scan Engine User Guide Disclaimer 2013-2017 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and operate it according
More informationHE40T Quickstart Guide Rev 2.0.0, Jan 2009
HE40T Quickstart Guide Rev 2.0.0, Jan 2009 EM-20952-1V200 Copyright and Disclaimer Copyright 2009 by Microscan Systems, Inc. 1201 S.W. 7th Street, Renton, WA, U.S.A. 98057 (425) 226-5700 FAX: (425) 226-8682
More informationHS-21/HS-41X Handheld Reader User Manual
HS-21/HS-41X Handheld Reader User Manual P/N 84-100052 Rev B Copyright and Disclaimer Copyright 2015 Microscan Systems, Inc. Tel: +1.425.226.5700 / 800.762.1149 Fax: +1.425.226.8250 All rights reserved.
More informationHE40T Quickstart Guide V1.0.1, December 2006
HE40T Quickstart Guide V1.0.1, December 2006 EM-20854-1V101 Safety Guidelines This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property.
More informationNT-1200 CCD Wired Barcode Scanner Overview
NT-1200 CCD Wired Barcode Scanner Overview Netum wired CCD Plug and Play barcode scanner integrates a high-performance processer with an effective decoding board, combining a fast decoding speed. IP67
More informationHE45T Quickstart Guide Rev 2.0.0, Jan 2009
HE45T Quickstart Guide Rev 2.0.0, Jan 2009 EM-20953-1V200 Copyright and Disclaimer Copyright 2009 by Microscan Systems, Inc. 1201 S.W. 7th Street, Renton, WA, U.S.A. 98057 (425) 226-5700 FAX: (425) 226-8682
More information2D Imaging Barcode Scanner. Programming. Advanced Handheld High Speed Laser Scanner
2D Imaging Barcode Scanner Programming 1 Advanced Handheld High Speed Laser Scanner This Programming Guide is intended for: 2D Image Handheld Scanner: Z 3172 Plus 2D Image Hands Free Scanner: Z 8072,
More informationC O N F I G U R A T I O N G U I D E
C O N F I G U R A T I O N G U I D E Copyright @ 2013, This manual is copyrighted, with all right reserved. Under the copyright laws, this manual may not, in whole or in part, be copied, photocopied, reproduced,
More informationMP168 Screen Barcode Image Platform
MP168 Screen Barcode Image Platform User Manual Version: MP168_UM_EN_V1.1.1 Notice Ensure that the optional DC adapter works at + 5 VDC, especially for the RS-232 interface cable. 1. All software, including
More informationSerial Programming Command Manual
Serial Programming Command Manual Disclaimer The information in this publication does not represent a commitment on the part of Newland. Newland shall not be liable for technical or editorial errors or
More informationIf you want to do other configurations please refer to below programming barcodes.
NT-W8 V18.9.1 Quick Setup Guide This model can work both via USB cable or 2.4G receiver. Connection Mode Working via USB cable Get Started: Connect scanner with your device via USB cable. If you use US
More informationNC-1200 BARCODE SCANNER. Configuration Guide - 1 -
NC-1200 BARCODE SCANNER Configuration Guide - 1 - Table of Contents Chapter 1 System Information 1.1 About this manual 3 1.2 How to set up the parameter-i 3 1.3 How to set up the parameter II 4 1.4 Resetting
More informationCODE READER MAH 200. Quickstart Guide
CODE READER MAH 200 Quickstart Guide Designation of this documentation: Technical manual for the Code Reader MAH 200 Version of the described product: 1.0 Editorial version of this documentation: 02/05
More informationModel NT-1203 With SPP Mode
Model NT-1203 With SPP Mode Get Started: This is 1D and 2D bluetooth scanner. Follow below "bluetooth connection" instruction to pair with your device and then setup the keyboard language (if you US keyboard,
More information2D/1D IMAGER MODEL - D740, S740, S840, S850
COMMAND BARCODES 2D/1D IMAGER MODEL - D740, S740, S840, S850 This document pertains to the following D740, S740, S840, S850: Model D740 Construction Orange Model S740 Blue Model S840 Black D740 Safety
More informationAdvanced Handheld High-Speed Laser Scanner
GLLS 1 Advanced Handheld High-Speed Laser Scanner Revision History Changes to the original manual are listed below: Version Date Description of Version 1.0 2015/03/03 Initial release 1.1 2015/04/15 Added
More informationProduct Engineering Specification Scan Utility
Product Engineering Specification Scan Utility Overview: 1. What is Scan Utility? Scan Utility provides a user interface that communicates with the scanner. It can set up the scanner, download the scanner
More information1504 Barcode Scanner. Setup barcodes included. Version 1.00
1504 Barcode Scanner Setup barcodes included. Version 1.00 Copyright 2011 CIPHERLAB CO., LTD. All rights reserved The software contains proprietary information of CIPHERLAB CO., LTD.; it is provided under
More informationMP720 Presentation Imager
MP720 Presentation Imager User Manual Version: MP720_UM_EN_V1.1.3 Notice Ensure that the optional DC adapter works at +5V, especially for the RS-232 interface cable. 1. All software, including firmware,
More information510-2d Complete Configuration Guide Worth Data Inc. 05/2010
510-2d Complete Configuration Guide Worth Data Inc. 05/2010 i User Preferences Table 5-1. User Preferences Default Table Parameter Parameter Number Default Page Number User Preferences Set Default Parameter
More informationMD22xx Barcode Scanner
MD22xx Barcode Scanner User Manual Version: MD2250_UM_EN_V3.2.18 NOTICE Ensure that the optional DC adapter works at +5 VDC, especially for the RS-232 interface cable. 1. All software, including firmware,
More information2D Imaging Barcode Scanner. Programming. Advanced Handheld High Speed Laser Scanner
2D Imaging Barcode Scanner Programming 1 Advanced Handheld High Speed Laser Scanner This Programming Guide is intended for: 2D Image Handheld Scanner: Z 3272 Plus Revision History Changes to the original
More information2D Imaging Barcode Scanner. Programming. Advanced Handheld High-Speed Laser Scanner
2D Imaging Barcode Scanner Programming 1 Advanced Handheld High-Speed Laser Scanner This Programming Guide is intended for: 2D Image Engine: Z-5212 Revision History Changes to the original manual are
More information2D Imaging Barcode Scanner GLLS. Programming Guide. Advanced Handheld High-Speed Laser Scanner
2D Imaging Barcode Scanner GLLS Programming Guide 1 Advanced Handheld High-Speed Laser Scanner This Programming Guide is intended for: 2D Image Handheld Scanner: Z-3172 Plus, Z-3272 Series 2D Image Hands-Free
More informationC O N F I G U R A T I O N G U I D E
C O N F I G U R A T I O N G U I D E Copyright @ 2013, This manual is copyrighted, with all right reserved. Under the copyright laws, this manual may not, in whole or in part, be copied, photocopied, reproduced,
More information1504/1504SE/1504A Barcode Scanner
1504/1504SE/1504A Barcode Scanner Setup barcodes included. Version 1.16 Copyright 2011~2016 CIPHERLAB CO., LTD. All rights reserved The software contains proprietary information of CIPHERLAB CO., LTD.;
More informationCD D Image Scanner Advanced Manual
CD-3200 2D Image Scanner Advanced Manual Version: A0 Contents INTRODUCTION... - 1-1. GENERAL OPTIONS... - 5-1.1. Restore to Factory Default Settings... - 5-1.2. Switch User Interface and Reset to Default
More information1504 Barcode Scanner. Setup barcodes included. Version 1.11
1504 Barcode Scanner Setup barcodes included. Version 1.11 Copyright 2011~2013 CIPHERLAB CO., LTD. All rights reserved The software contains proprietary information of CIPHERLAB CO., LTD.; it is provided
More information1504/1504SE Barcode Scanner
1504/1504SE Barcode Scanner Setup barcodes included. Version 1.15 Copyright 2011~2014 CIPHERLAB CO., LTD. All rights reserved The software contains proprietary information of CIPHERLAB CO., LTD.; it is
More information1. Factory Default Se ng (include below three steps)
2.4 GHz Wireless USB2.0 Wired Important Note: There will not have a beep sound for some of configura on.as long as light turns off a few seconds before you release the trigger bu on that means scanner
More informationC O N F I G U R A T I O N G U I D E
C O N F I G U R A T I O N G U I D E Copyright @ 2009, This manual is copyrighted, with all right reserved. Under the copyright laws, this manual may not, in whole or in part, be copied, photocopied, reproduced,
More information2D BARCODE SCANNER CA-SC-20200B
D BARCODE SCANNER CA-SC-B Quick Start Guide Getting Familiar with Your Device Thank you for choosing Capture Bar Code Scanner. All Devices deliver world-class performance for a broad range of applications
More informationUser s Manual. Xi3000 Scanner. Table of Contents
Xi3000 Scanner User s Manual Table of Contents Restore Default Settings... 1 Exit Setup without Changes... 1 Configure Through RS232... 1 List Setting... 1 Buzzer Settings... 2 Reading Redundancy Setting...
More information2D/1D IMAGER MODEL - D740, S740, S850
COMMAND BARCODES 2D/1D IMAGER MODEL - D740, S740, S850 This document pertains to the following D740, S740, S850: Model D740 Construction Orange Model S740 Blue Model S850 Black D740 Safety Green S740 Green
More informationMachine Vision Systems
Machine Vision Systems SIMATIC MV340 System Manual 2012 Legal Information Scope of Validity of this Document This documentation is valid for all supplied variations of the SIMATIC MV340 system and describes
More informationLow voltage Alarm: Scanner will make 5x beeps to remind you that it's under low voltage. Plug the USB cable to charge power for it.
NT-W6 V18.9.1 Connection Mode Working via USB cable Get Started: Connect scanner with your device via USB cable. If you use US keyboard, it's a plug and play model. If you use other type of keyboard, please
More information