ECT(Embedded Embedded Computing Terminal) Manual

Transcription

1 ECT(Embedded Embedded Computing Terminal) Manual Package Content 1. Thin Client based Terminal Unit Box The following items are provided with the Breeze Embedded Computing Terminal: I. Terminal Unit. II. Power Cord. III. 12V DC Adapter. 2. TFT Box Keys Keyboard Box Do s and Don ts Do s and don ts that needs to be taken care while installing the terminal is as follows 1. Do not place the terminal where it is subjected to a great deal of shock or vibration. 2. Do not use or place the terminal where there is excessive dust or heat. 3. Locate the terminal as far as possible from noisy electromechanical devices and avoid locations that are characterized by strong magnetic fields. 4. Avoid placing objects on or around the terminal that will restrict the airflow through its ventilation slots. 5. Place the terminal on a flat hard surface allowing 5 inches on all sides for ventilation. 6. Always use a grounded AC power outlet for powering the terminal. 7. Place the terminal sufficiently near the AC outlet for power connection to avoid any strain on the AC power cord. Breeze Innovations Pvt. Ltd. 1

2 Connecting the Cables to Terminal: CAUTION: Do not force the connectors into the socket. If any resistance is encountered, ensure that the connector is oriented correctly to the socket. Before connecting the cables, ensure that the cables are of the correct lengths. Before applying power to the terminal ensure the following: a. Ensure that the Power ON Switch Located at the Front Side of the terminal is switched off before connecting the connectors. The LED should not be glowing in the terminal. b. Place the keyboard in front of the Monitor and connect the keyboard cable to the PS/2 or USB Connector at the rear side. c. In case of using a RS232 Connector, Connect console cable from to the Terminal DB25 connector provided on back side. d. In case of using a network connection, connect a 10/100 Base T twisted pair network cable to the network connector. e. Depending on the configuration needs, connect a printer to the parallel/serial port f. Connect the video signal cable from the monitor to the 15 pin D type female connector at the rear side of the Terminal. Secure the cable firmly the tightening the screws available in the video signal cable. g. Plug the Power Cord in to a 230V AC Grounded AC Outlet Switching On the Terminal Connect the Power cord to the DC Adapter Plug the DC adapter Outlet to the socket in the Terminal. Connect the monitor to the Power source and switch on the monitor. Press the power on switch provided in the front side of the Terminal to turn on the terminal. The power on LED indicator located at the front will glow. When the terminal turns on, boot messages will appear on the screen and all LEDs in the keyboard turn on and off. Breeze Innovations Pvt. Ltd. 2

3 Configuring the terminal an embedded design lab Once the terminal is switched on, the Profile manager Dialog will appear Press the Tab key in the Keyboard, So that the Activate button is highlighted or selected. Then Press Space key Or Enter key to start the profile connection By Default the profile is connected to Serial port 1. To change any settings Press F3 in Profile screen or using Menu Button in the Profile manager. Terminal Screen Shortcut keys: The below shortcut keys can be activated once the profile is activated Switching between Active Profile and Profile manager Ctrl + up Arrow Menu Invoke Menu F3 Quit Menu F3 / Alt Activate Menu Item Underlined Letter Select item - Underlined Letter / Enter Key Navigate Menu Up / Down Arrow / Tab Navigate inside menu Right arrow / Left Arrow Go to Parent Menu - ESC Calendar Invoke Calendar - Right Alt + Right Shift Calendar Help - F6 Quit calendar F11 Calculator Invoke Calculator - Right Alt + Right Ctrl Quit calculator Ctrl + Q Breeze Innovations Pvt. Ltd. 3

4 UTS HOT KEY FUNCTIONS:- Key functions HOLD PRINT SCREEN SETUP DATA(NOT ACCESSIBLE TO OPERATOR) BREAK ADVANCE TICKET TYPE REVERSE TICKET TYPE II CLASS SL CLASS CC CLASS FORM No. 7(MISCELLANEOUS TICKET) BLANK PAPER TICKET ORDINARY TRAIN TYPE M/EXP TRAIN TYPE DISPLAY DETAILS OF RESPECTIVE FIELD SAME AS ---F SUPERFAST TRAIN TYPE JANSHATABDI TRAIN TYPE E/DR----T/II FORM No. 1 PLATFORM TICKET MAIN MENU SWITCH TO NEXT LIST IN FORM NO.14 FORM NO.14 RETURN TICKET TYPE TOGGLE BETWEEN FORM NO.12 AND 13 NON ISSUE FORM PREVIOUS MENU TOGGLE FROM FORM NO.1 TO BPT FORM TOGGLE FROM FORM NO.1 TO FORM NO.7 (MISC FORM) Hot key in Breeze ECT F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Ctrl + F5 Ctrl + F6 Ctrl + F7 Ctrl + F8 Ctrl + F9 Ctrl + F10 Ctrl + F11 Ctrl + F12 Num Lock (/)SLASH (*)STAR Pause Break (-)Hyphen Home (+)Plus (.)DOT Breeze Innovations Pvt. Ltd. 4

5 TOGGLE FROM FORM NO.12 TO FORM NO.1 TOGGLE FROM FORM NO.1 TO BPT FORM MAIN MENU HOLD RELEASE HOLD DISPLAY TIME Display of defined hot key stations CTRL + A CTRL + S CTRL + Q CTRL + T CTRL + R on source field Function Keys corresponding to older Keyboard Layout: Function F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 HELP DO F17 F18 F19 F20 Key / Combination F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Ctrl + F5 Ctrl + F6 Ctrl + F7 Ctrl + F8 Ctrl + F9 Ctrl + F10 Ctrl + F11 Ctrl + F12 Breeze Innovations Pvt. Ltd. 5

6 Numeric Keypad corresponding to older Keyboard Layout: Function PF1 PF2 PF3 PF4 (-)Hyphen (,)Coma Key / Combination Num Lock (/)SLASH (*)STAR Pause Break (-)Hyphen (+)Plus Diagrammatic Representation: PF1 PF2 PF , Enter Breeze Innovations Pvt. Ltd. 6