VMS2.0 Client Software. User Manual
|
|
- Shavonne Harmon
- 5 years ago
- Views:
Transcription
1 VMS2.0 Client Software User Manual
2 Chapter 1 Contents Brief Introduction Description Running Environment...1 Chapter 2 Installation... 2 Chapter 3 Live View User Login Adding the Device Adding Decoder Group Management Adding the Group Importing the Device to Group Removing the Devices from the Group Deleting a Group Layout...9 Chapter 4 Preview Basic Operations in Preview Preview Toolbar Starting and Stopping the Preview Starting Preview for One Camera Stopping the Preview Auto-switch in Preview I
3 4.5 Device layout round tour PTZ Control in Preview Configuring the Preset Configuring the Track Configuring the Cruise Image Parameters Preview Multi-screen Display...15 Chapter 5 Video Playback Playback Video files Buttons on Playback interface Video File Download...17 Chapter 6 E-map Management Adding an E-map Map Tree Right-click Function Adding Cameras to E-map Previewing Cameras on E-map...21 Chapter 7 Decoder Management Adding TV Wall Layout Settings Screen Input Binding Group Management Start Status...25 II
4 7.2 Decoding Management Decoding Mode Selection Decoding on Wall Decoding Round Tour Decoder Preview Buttons Decoder Playback Decoder Playback Buttons Chapter 8 Alarm Configuration New Rules of Linkage Modify the Alarm Rules Delete the Alarm Rule View Alarm Information Chapter 9 Log Management Chapter 10 User Account Management Adding the User User Right Allocation Managing the User Chapter 11 Local Configuration...40 III
5 Chapter 1 Brief Introduction 1.1 Description VMS2.0 is a versatile video management software for the DVRs, NVRs, IP cameras, decoders, etc. It provides multiple functionality, including real-time live view, video recording, remote search and playback, file backup, alarm receiving, etc., for the connected devices to meet the needs of monitoring task. With the flexible distributed structure and easy-to-use operations, the client software is widely applied to the surveillance projects of medium or small scale. This user manual describes the function, configuration and operation steps of VMS2.0 software. To ensure the properness of usage and stability of the software, please refer to the contents below and read the manual carefully before installation and operation. VMS2.0 support the initiative register and I8H two protocol at present, owns 1000-CH free authorization,and authorize the deadline for a month, equipment will not be able to be normal online after the authorization expires, if you want to get a permanent authorization,please contact with dealers to buy. 1.2 Running Environment Operation system: Windows 2003 or higher (need to install the framework4.0), recommend to use windows7 CPU: Intel(R) Celeron(R) CPU or higher models RAM: 4G or higher System environment: The program running need to occupy the database, 5050 port and 6666 port,one PC can only run one database,please make sure there being no other database normally running and the two data port are being used, otherwise it may cause the program being not able to run normally. 1
6 Chapter 2 Installation 1. Double-click the software icon to run installation program. 2. Language configuring: the program will automatically identify system language, if user want to install other language, please select in the drop-down box, initial program only support simplified Chinese and English. Click OK after configuring the installation language. 3. Click Next in the following figure. 4. Setting the install folder: The default path is C:\VMS. User can change to other folder, for example we change to the D folder here. Click Next after configuring. 2
7 5. Shortcut setting. 6. Click Next and Install to start the installation progress. 7. Click Finish to complete the installation. 3
8 Chapter 3 Live View 3.1 User Login Steps: Input the password: Initial password is Optionally, check the check-box Remember password to skip input password next time. Check the check-box Auto login to log into the software automatically. Click Login. 3.2 Adding the Device After running the VMS2.0, devices including network cameras, video encoders, DVRs, NVRs, decoder, etc., should be added to the client for the remote configuration and management, such as live view, playback, alarm setting, etc. Perform the following steps to enter the device adding interface: 1. Click the icon on the control panel. 2. Click the Add device tab. 3. Select the Protocol in the Add device interface. 4
9 4. Click Search button, then the device online will be listed on the Search device online window, shown in figure. 5. Check the device you want to add, click Select button. 6. Click Save button. 5
10 3.3 Adding Decoder 1. Click the Decoder tab in the Devices management interface, shown in figure 2. Click Add Decoder tab to enter the searching interface, shown in figure 3. Click Search button to search for the decoder online. 6
11 4. Check the decoder that needs to add, click Select button. 5. Click Save button. 3.4 Group Management The devices added should be organized into groups for a convenient management. You can get the live view, play back the record files, and do some other operations of the device through the group. Steps to enter the Group management interface: Open the Devices management page. Click the Group tab to enter the Group management interface. 7
12 3.4.1 Adding the Group Steps: 1. Right-click in right side blank are and choose Add Group, shown in figure. 2. Input a group name as you want. 3. Click Save to add the new group to the group list Importing the Device to Group Steps: 1. Select the devices in the left side list. 2. Select a group from the group list. 3. Click the button to import the selected devices to the group. 8
13 3.4.3 Removing the Devices from the Group Steps: 1. Select the devices in group list. 2. Click the button to remove the devices from the group Deleting a Group Steps: 1. Select the group in the group list. 2. Right-click on the top of the group name and select Delete Group. 3.5 Layout In the Devices Management module, click the Layout tab to enter the Layout configuring interface. 9
14 Click the Add Layout button, it will pop-up the window: Fill in the name of the layout; Select the split screen number; Click Save button. 10
15 Chapter 4 Preview 4.1 Basic Operations in Preview For the surveillance task, you can view the live video of the added network cameras and video encoders on the Main View page. And some basic operations are supported, including picture capturing, manual recording, PTZ control, etc Preview Toolbar On the preview window, the following toolbar buttons are available: Toolbar Description Toolbar Description Open/close the channel intercom Stop the channel preview Capture Full Screen Open/close the channel record Open/close the audio Stop stream Record state Window division 11
16 4.3 Starting and Stopping the Preview Starting Preview for One Camera Steps: Open the Preview page. Click the widow division toolbar to select a division mode for preview. Click and drag the camera from the Device list to the display window Stopping the Preview Steps: Select the display window. Click the icon that appears in the upper-right corner when the mouse pointer is over the display window to stop a selected channel, or click button in preview toolbar to stop all the preview. 4.4 Auto-switch in Preview The video stream of the cameras from the same group will switch automatically in a selected display window in camera auto-switch. Steps: Open the preview page. Select a display window for camera auto-switch. Select a group and right-click to start polling. You can right-click to pause or stop the camera auto switch. 12
17 4.5 Device layout round tour Add two or more than two layout (Specific operation please refer to the device management - layout), after finished the layout settings, switch to the page layout in the preview screen, as shown in the figure: Right click on the layout, one click to open the layout preview, select start polling can open multiple layout between round tour, round tour time interval can be set when set up the layout, select stop all can stop the round tour or close the current preview. 4.6 PTZ Control in Preview The software provides PTZ control for cameras with iris/focus/zoom functionality. You can set the preset, cruise and track for the cameras on the PTZ Control panel Configuring the Preset A preset is a predefined image position which contains information of iris/focus/zoom and other parameters. Perform the following steps to add a preset: Click the direction buttons and other buttons on the PTZ control panel to steer the 13
18 camera to the desired position. Select a PTZ preset number from the preset drop-down list and click. To call a configured preset, select the preset number, then click the Configuring the Track A track is a memorized, repeating series of iris/focus/zoom, and preset functions. Perform the following steps to add a track: Select the track number from the track drop-down list. Click the to start recording of this track path. Use the direction buttons to control the PTZ movement. Click to stop and save the track recording. Click the icon to call the track. To stop calling the track, click once again Configuring the Cruise A cruise is a scanning track specified by a group of user-defined presets, with the scanning speed between two presets and the cruise time at the preset separately programmable. Perform the following steps to add and call a cruise: Click a cruise number from the drop-down list. Click to add a preset, and set the time and speed for the preset. Repeat the above operation to add other presets to the cruise. Click the icon to call the cruise. 4.7 Image Parameters After opening the preview, user can adjust image parameters of picture, this adjustment didn t change the front-end parameters of IPC, just adjust the display effect on VMS of image, shown in figure : 14
19 Users can adjust the bright, contrast and related parameters according to desired. 4.8 Preview Multi-screen Display Preview module can open multiple, and the various modules are active, do not influence each other, if the user's graphics card support multi-monitor output, you can meet the requirements of multiple screen display. Don't limit the number of opening preview module, for example, open two preview module, drag out one of which,(drag it out after the same module can be dragged back), as for another display screen, the specific effect as shown in the figure below: The main screen on the left, the auxiliary screen on the right side, they do not influence each other between these two screens. 15
20 Chapter 5 Video Playback Click the icon on Control panel, entering the video playback page. 5.1 Playback Video files Steps: Check the device that needs to playback on the device list. Select the date on the calendar. Select the video location, CMS or DEVICE. Select the Stream Type, Main Stream or Sub Stream. Click Video Retrieval button. The retrieve result is shown in figure: 16
21 Click button to start playing. 5.2 Buttons on Playback interface button Description button Description Start Play Frame Play Slow Forward Capture One Splits Nine Splits Stop Play Audio Fast Forward Full Screen Four Splits Download 5.3 Video File Download Click button on the playback interface, will get into video file download interface. Steps: Select the file location, DEVICE or CMS. Select the channel. Set the start time and end time. Browse and set the download path. 17
22 Click icon to start download process. 18
23 Chapter 6 E-map Management The E-map function gives a visual overview of the locations and distributions of the installed cameras and alarm input devices. You can get the live view of the cameras on the map, and you will get a notification message from the map when alarm is triggered. Click the icon on the Control panel to open the E-map configuration page. 6.1 Adding an E-map Steps: Open the Map management page. Right click on the Map icon and click add map Click the icon and select a map file from the local path. Input a descriptive name of the added map as desired. Click to save the settings. 19
24 The map added is displayed in the Map Display Area. Use the mouse to zoom in or zoom out on the map. You can click-and-drag to adjust the map area for view. Among which, the opened map will be marked yellow as diacritical point. 6.2 Map Tree Right-click Function 1)Add Map: add new map. 2)Delete Map: delete the current selected map. 3)Add Child Map: add sub map in the current directory map, one map can add multi & multilevel sub map, after finish adding sub map, it will show on the main map as click icon, double click this icon on the main map can switch to the related sub map, button on the sub map, can return to the main map. 20
25 6.3 Adding Cameras to E-map Steps: Click to enter Map configuration interface. Click and drag the camera from device list to the desired position on the map. 6.4 Previewing Cameras on E-map Click to enter Map preview interface. Double-click the camera or right-click it and select Preview and you can get the live view of the cameras. If there is any alarm triggered, an icon will appear on the camera. 21
26 Chapter 7 Decoder Management The TV Wall module provides the video decoding functionality, and the decoded video can be displayed on the TV Wall for an attention-grabbing performance. Note: The TV Wall module only displays when Decoding Device is enabled for adding to the client. 7.1 Adding TV Wall Layout Settings Steps: Click Add TV Wall to enter TV Wall Setting interface. Set the window division matrix, maximum 8*8. Input the TV Wall Name. Make a description of the TV Wall if needed Screen Input Binding figure: Drag and drop the added decoding to the layout that has been set, as shown in the 22
27 On this interface, users can layout according to the actual situation, then make the decoder matrix corresponding to the TV wall layout, if the screen plans for round tour screen, please check whether round tour after finish setting Group Management Enter the group management, as shown in the figure: Click add group(note: only round tour screen can add groups, without round tour screen, can directly click next to skip this page). 23
28 For the round tour screen in figure 2, it can set group, step 1, set the group name and group standing time, group name customer can self define according to the actual situation, group standing time user can select between 1s to 6000s. Click confirm after finishing setting, then drag the device channel to the split screen 2, then complete the layout of the first group, as shown in the figure. After finishing setting, click add group below, can continue adding a new group, operation method is consistent with that of before, after finishing setting multi group, if you want to delete certain group, select the group, and just click delete group. After finishing setting all the group, click save and enable, it will save the group that has been set, then enable it, if click save, then it can just save the group but the 24
29 group status is disable, as shown in the figure: Start Status If you need to enable this configuration, click immediately to enable this configuration, and just click finish button below, if don't need to enable for the time being, directly click finish to exist this interface. After finish setting, the configuration scheme will display in the decoding configuration list. 7.2 Decoding Management Click icon on the Control panel, entering the decoding preview window, 25
30 shown in the figure: Decoding Mode Selection After selecting the scheme, in order to ensure the normal decoding, please set the decoders decoding mode first, decoding mode is related with the decoder, different decoder is not the same as the corresponding decoding mode, decoding mode shows decoders decoding ability, click button in the picture, as shown in the figure: Decoding mode shows the decoder current decoding ability, this decoder in the picture supports 3 types of decode mode, namely 16CH 720*576,9CH 1280*960 and 4CH 2048*1536(note: the number behind shows the max resolution that can decode, such as 9CH mode, the max resolution of which is 1280*960). To ensure the resolution of front end IPC does not exceed the resolution limit of the current decoder mode, can it normally decoding display. 26
31 7.2.2 Decoding on Wall After selected scheme, select the channel that needs decoding on wall on the left side of the device list, the decoding screen that have been dragged and dropped to the corresponding decoder can complete the decoding on the wall(note: the screen that has been set as round tour screen can not be manually dragged and drop the channel to decode can only be used for round tour): For the channel that has been dragged and dropped to the decoder screen, if want to replace other channels, just directly drag and drop the other channels to the corresponding window. If you want to delete, you can select the channel that needs to delete, then just click button: 27
32 7.2.3 Decoding Round Tour If you want to implements decoding round tour for certain decoder, you must check round tour for the decoder when configure the TV wall scheme(6.2are described in detail), round tour group is also confirmed when configure the scheme. After ensuring that the round tour group and round tour screen has been set in the scheme, click tour, and click button on the below interface, then you can start/pause the round button in the process of the round tour, you can stop the round tour(note: round tour control button is only effective for the round tour decoding, not effective for the normal decoder Decoder Preview Buttons button Description button Description Previous Group Start Roll Clear Next Group Stop Roll Full Screen 1 Splits 4 Splits 9 Splits 16 Splits Decoder Playback Switch to playback operation page, as shown in the figure: 28
33 Drag and drop the channel that needs to playback to the decoder, then select search terms(date and video path), click video retrieval button below, you can retrieve the video file of the corresponding channel, this operation is similar to the video playback module operation. After finishing the video retrieval, click button below or operate mouse to double click to position, then it will begin to play, and it can position again by double clicking on the mouse in the process of playing, as shown in the figure: Note: Due to the decoder performance limits, the decoder playback can support at most 4CH playback at the same time. 29
34 7.2.6 Decoder Playback Buttons button Description button Description Start Play Frame Play Fast Forward Capture Stop Play Slow Forward Clear Full Screen 1 Splits 4 Splits 9 Splits 16 Splits 30
35 Chapter 8 Alarm Configuration Click icon on the Control Panel, entering the alarm configuration interface. Alarm configuration is alarm rule setting module, if users want to achieve alarm linkage on VMS, must set the alarm linkage rule first, shown in the figure: The alarm configuration page will display the linkage rule that has been set at present and the enable status of the rule. 8.1 New Rules of Linkage New rules of linkage, please click Add on the upper left corner, shown in the figure: 31
36 1)Rule Name: the alarm linkage rule name, users can self define. 2)Alarm Type: Select the alarm type. 3)Alarm Source: Select the alarm source of camera that has been added to VMS. 4)Linkage Action: including map, capture, PTZ, Record, pop image and TV wall, the various definitions are as follow: Map: it shows alarm on the map interface. Capture: capture the images of linkage channels; PTZ: the PTZ can turn to certain preset point, cruise or track, after linkage. Record: after the alarm triggered, the linkage channel will start recording. Pop Image: after the alarm triggered, the linkage video channel will pop-up the preview window and stay for a period of time. TV Wall: select the channel and TV wall that needs to be on wall, after the alarm triggered, it will upload the real time preview picture of this channel to the TV wall display. 32
37 8.2 Modify the Alarm Rules After finishing adding the alarm rule, users can click the Modify icon marked in the picture to edit for the existed rule. 8.3 Delete the Alarm Rule If you want to delete the rule existed, just click Delete button in the picture, if just temporarily not enable, you can move check button in the picture. 8.4 View Alarm Information Different alarm types can be displayed on the panel: Motion Detection, Video lost, Alarm Input, and Other Alarm. Steps: Click button on the Control Panel, entering the alarm information management interface: Set the start and end time you want to search. Select the alarm type. Click the icon, then the information matching will listed, shown in figure. 33
38 34
39 Chapter 9 Log Management The log files of the client software are stored on the local PC and can be searched for checking. 5 types of log files are provided: Login/out, Device manage, Open/Close record, Linkage manage and Remote config. Steps: Click button on the Control Panel, entering the log management interface: Set the start and end time you want to search. Select the log type. Click the icon, then the information matching will listed, shown in figure. 35
40 Chapter 10 User Account Management Multiple user accounts can be added to the client software, and you are allowed to assign different permissions for different users if needed Adding the User Steps: Open the Users Management page. Click icon to open the Add user dialog box. Input the user name, password and confirm password as desired. Click User Right Allocation For the users that have been added, if want to allocate rights, click the right button marked on the picture, then begin rights allocation: 36
41 The rights can be divided into three parts, Common right, Map right and decoder right. 1)Common right:common rights including preview, playback, record, and intercom. The channel that haven t been allocated the rights will be hidden when the user log in. For example, the test user just have been allocated only 5 channels of preview right, shown in the figure: 37
42 Then the user test to login the server will only be able to see 5 channels, shown in the figure: Note: Super user admin owns the highest rights, and can not be modified Managing the User 1)Modify a user Click icon shown in the figure, it will pop up an editable interface. 38
43 Users can modify the user name and password as desired, after finish modifying, just click icon. 2)Delete a user On the User management interface, click icon of a user, then it will delete the corresponding user, among which the super user admin can not be deleted. 39
44 Chapter 11 Local Configuration Click button on the main interface, enter the local configuration interface. 1)Auto login: run the client port after checking, it will automatically login the selected server station. 2)Boot from the start: Booting will automatically run the client port after checking. 3)Auto stream: Configure the stream mode. 4)Capture path: Capture image saving path. 5)Download path: Video file saving path. 6)Export log path: The exported log profile saving path. 7)Interval of preview poll: Preview tour time interval, the default is 30s. 8)Alarm sounds: Alarm voice configuring. 9)Rec storage path settings: Configure the path and space for recording. 10)Window scale: Preview or playback window scale setting. 11)Record colors: Shows colors of different types of video recording. 12)Version: Display the version of the software. 13)Data backup and restore: Configure the backup and restore operation. 14)Effective date:shows the expiry date. 15)Enable web: Set and enable web visit. 40
Network Video Monitor Software
Network Video Monitor Software V2.0.0.7 Operation menu 1 www.opax.com Chapter 1 Product Overview 1.1 Performance instruction Network video monitoring software is a centralized management software for I8
More informationW Box VMS BOX T E C H N O L O G I E S.
W Box VMS BOX T E C H N O L O G I E S www.wboxtech.eu Contents Contents... 1 Overview... 3 1.1 Description... 3 1.2 Running Environment... 3 1.3 Function Modules... 3 Live view... 6 2.1 User Registration
More informationSiera CMS Panther v3.0
1 This manual maybe exist inexact in technology, product feature, operation discrepancy or misprint. The content of the manual will renew according to the product function enhance, and regular change or
More informationUSER MANUAL. Mac Version
USER MANUAL Mac Version Contents 1 Software Introduction... 1 1.1 Summary... 1 1.2 Install and Uninstall... 1 1.2.1 Install the Software... 1 2 Login Software... 3 2.1 Login... 3 2.2 Control Panel Instruction...
More informationCentralized Monitoring Management Platform. Manual
Centralized Monitoring Management Platform Manual 3 Contents 1. Products... 5 1.1. Summary... 5 1.2. Application Environment... 5 1.3. Install and uninstall... 6 2. Centralized Monitoring Management Platform
More informationVMS-A1 Client Software. User Manual
VMS-A1 Client Software User Manual Contents Contents... 2 Chapter1. Overview... 4 1.1 Description... 4 1.2 Features & Functions... 4 Chapter2. Update Info... 6 Chapter3. Starting VMS-A1... 7 3.1 Installing
More informationQuick Start Guide (V1.03) UD.6L0201B1064A01
ivms-4200 PCNVR Quick Start Guide (V1.03) UD.6L0201B1064A01 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact the dealer. This manual applies
More informationQuick Operation Guide of ivms-4200
Quick Operation Guide of ivms-4200 V1.02 2012-02-22 Description ivms-4200 is a video management software using a distributed structure to manage all the connectable devices. It can manage the NVR, DVR,
More informationNVMS User Manual. Version 2.1.0
NVMS-1000 User Manual Version 2.1.0 Contents 1 Software Introduction... 1 1.1 Summary... 1 1.2 Operation Environment... 1 1.3 Install and Uninstall... 2 1.3.1 Install the Software... 2 1.3.2 Uninstall
More informationManual Version: V1.01. ISS Manager Video Management Software User Manual
Manual Version: V1.01 ISS Manager Video Management Software User Manual Notice The information in this manual is subject to change without notice. Every effort has been made in the preparation of this
More informationNVMS User Manual
NVMS-1000 User Manual Contents 1 Software Introduction...1 1.1 Summary... 1 1.2 Operation Environment... 1 1.3 Install and Uninstall... 2 1.3.1 Install the Software... 2 1.3.2 Uninstall the Software...
More informationVideo Surveillance Management Software NVClient V5 User Manual
Video Surveillance Management Software NVClient V5 User Manual Version: V5.0 Update Date: 2013-12-12 Welcome Thanks for using the Company's digital video surveillance management software. Please read this
More informationivms320 Platform User Manual
ivms320 Platform User Manual Version: 9.1.8.5 Table of Contents Chapter 1 Overview... 4 1.1. Description... 4 1.2. Installation... 4 1.3. Uninstallation... 10 1.4. Log in... 13 1.4.1. First Login... 13
More informationNVMS7000 Client Software
NVMS7000 Client Software User Manual User Manual About this Manual This Manual is applicable to NVMS7000 Client Software. The Manual includes instructions for using and managing the product. Pictures,
More informationNVMS User Manual
NVMS-1000 User Manual Contents 1 Software Introduction...1 1.1 Summary... 1 1.2 Operation Environment... 1 1.3 Install and Uninstall... 2 1.3.1 Install the Software... 2 1.3.2 Uninstall the Software...
More informationCentral Management Software for NVR-915 / NVR-1615 CV5-M256
Central Management Software for NVR-915 / NVR-1615 Table of Contents Chapter 1. Main Console... 4 1.1 Tool Bar... 4 1.2 NVR List... 5 1.3 Division List... 7 1.4 Group List... 9 1.5 PTZ Panel...11 1.6 Operation
More informationTS View Client Software. User Manual
TS View Client Software User Manual 2016-03-03 User Manual About this Manual This Manual is applicable to TS View Client Software. The Manual includes instructions for using and managing the product. Pictures,
More informationManual Version: V1.15. Video Management Software Guard Station User Manual
Manual Version: V1.15 Video Management Software Guard Station User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. Disclaimer
More informationNVMS1000. User Manual
NVMS1000 User Manual Contents 1 Software Introduction... 1 1.1 Summary... 1 1.2 Operation Environment... 1 1.3 Install and Uninstall... 2 1.3.1 Install the Software... 2 1.3.2 Uninstall the Software...
More informationSURVEILLANCE KIT USER MANUAL. All in One Series
SURVEILLANCE KIT USER MANUAL All in One Series Contents Part one Basic Operation 1 1. Basic Installation 1 1. Hard Disk Installation 1 2. Mouse Connection 1 2. Starting 1 3. Turn Off 1 4. Login 2 5. Preview
More informationNVMS-7000 Client Software User Manual Version 1.03
NVMS-7000 Client Software User Manual Version 1.03 Contents Chapter 1. Overview... 3 1.1 Description... 3 1.2 Running Environment... 3 Chapter 2. Starting NVMS-7000... 4 2.1 User Registration... 4 2.2
More informationIVS2000 video monitoring Instruction manual
IVS2000 video monitoring Instruction manual Statement Because the product version upgrade or other reasons, this manual content may change. We will keep the right to change the contents of this manual
More informationivms-4200 Client Software User Manual UD.6L0206D1030A01
ivms-4200 Client Software User Manual UD.6L0206D1030A01 User Manual 2015 Hangzhou Hikvision Digital Technology Co., Ltd. This user manual is intended for users of ivms-4200 Client Software. It includes
More informationCMS Video Monitor Platform User Manual. CMS3.0 User Manual 非常感谢您购买我公司的产品, 如果您有什么疑问或需要请随时联系我们
CMS3.0 User Manual 8-8-2014 声明 非常感谢您购买我公司的产品, 如果您有什么疑问或需要请随时联系我们 This user manual will be updated when the product s function enhanced, and will regularly improved and updated the product s description
More informationManual Version: V1.01. Video Management Server Client Software User Manual
Manual Version: V1.01 Video Management Server Client Software User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. Notice
More informationVideo Management Software
Video Management Software User Manual Web: europesecurity.eu Mail: info@europesecurity.eu Tel.: 0541 352 952 User s Manual 2 Contents CHAPTER : XMS CENTRAL USER MANUAL 1 PC REQUIREMENT 3 2 INSTALL 3 3
More informationivms-4000 (V ) Decoder Control User Manual
ivms-4000 (V2.03.07) Decoder Control User Manual Table of Contents Decoder Control... 1 User Manual... 1 Table of Contents... 1 Chapter 1 Introduction... 2 1.1 Overview... 2 1.2 Computer Disposition Request...
More informationSmart Professional Surveillance System User s Manual
Smart Professional Surveillance System User s Manual Version 2.00.0 Table of Contents 1. OVERVIEW AND ENVIRONMENT...1 1.1 Overview... 1 1.2 SmartPSS Interface... 1 2. LOGIN...3 3. DEVICES...5 3.1 Auto
More informationVideo Management Software 2.0(VMS) User Manual. 1 CA-Sikring CVR:
Video Management Software 2.0(VMS) User Manual 1 CONTENT PART 1: Product Introduction... Fejl! Bogmærke er ikke defineret. 1. Overview... Fejl! Bogmærke er ikke defineret. 2. System Requirements... 2 2.1
More informationSecuGuard. Basic 5.0. User s manual. Dec Version: 5.0.x
SecuGuard Basic 5.0 User s manual Dec. 2009 Version: 5.0.x SecuGuard Basic System Requirement...5 Installation...6 Before Installing the Software... 6 Starting the Installation... 6 Quick Start...9 Install
More informationNVMS-5000 NVMS User Manual
NVMS-5000 NVMS-5000 User Manual NVMS-5000 User Manual Contents 1 Introduction... 4 1.1 NVMS-5000 Brief Introduction... 4 1.1.1 Summerization... 4 1.1.2 Software Architecture... 4 1.2 System Components...
More informationClient Software-4000(V ) User Manual
Client Software-4000(V2.00.02) User Manual Index Chapter 1 Welcome to Client Software-4000 (V2.0)... 1 1.1 Overview... 1 1.2 Computer Disposition Request... 1 1.3 Convention... 1 Chapter 2 Install & Uninstall...
More informationNetClient software user manual
NetClient software user manual 1-1. General information Net Client is an application which provides users not only viewing and controling remote DVRs, but also receiving realtime event data or alarm signals
More informationCMS Video Monitor Platform User Manual. bezpeka-shop.com. CMS3.0 User Manual 非常感谢您购买我公司的产品, 如果您有什么疑问或需要请随时联系我们 - 1 -
声明 CMS3.0 User Manual 非常感谢您购买我公司的产品, 如果您有什么疑问或需要请随时联系我们 - 1 - This user manual will be updated when the product s function enhanced, and will regularly improved and updated the product s description or
More informationVideo Capture Card Manual
Video Capture Card Manual 1. System Login System installation is completed, will generate desktop < DVR Surveillance System> icon, please double-click operation. Or choose Start -> All Programs -> DVR
More informationUser Manual. Central Monitoring Software for TER-series recorders. CenPro
EN User Manual Central Monitoring Software for TER-series recorders CenPro Contents CENPRO USER MANUAL 1 PC REQUIREMENT 3 2 INSTALL 3 3 UNINSTALL 5 4 BASIC OPERATION 7 4.1 Log In 7 4.2 Screen Layout 8
More informationerrors, or places that do not match the product. If you have any unsolved please contact our technical support department.
- 0 - Statement: This manual may contain several technical inaccuracies or typographical errors, or places that do not match the product. If you have any unsolved problems in the process of using product
More informationNVR Client system. User Guide
NVR Client system User Guide Content Chapter1 Start up and Main interface 2 1.1 Start up 2 1.2 Main interface 6 1.2.1 Interface description 6 1.2.2 Select playback channel 8 1.3 System Menu 11 1.3.1 Remote
More informationSunEyes V Series IP Camera P2P CMS user manual
SunEyes V Series IP Camera P2P CMS user manual Version: 2.0 Date: July. 2015 This document is applicable to all series devices in our company. Page 1 ON page 40 foreword The HiP2P client of IP Camera is
More informationVideo Management Software User Manual
Video Management Software User Manual Manual Version: V1.02 i Thank you for choosing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. Disclaimer CAUTION!
More informationDSS Professional FAQ. Ver:
DSS Professional FAQ Ver: 7.00.000 Contents 1 Installation and Deployment... 1 1.1 What kind of OS can install DSS Professional?... 1 1.2 What kind of performance of server can install DSS Professional?...
More informationPro71600N3 NVR User Manual
Pro71600N3 NVR User Manual User Information Admin User Name: Admin Password: IP Address: System Name: Table Of Contents 1. Menu Operation...4 1.1 Main Menu...4 2. Start & Shutdown System...5 2.1 Start
More informationContents. 1.2 Software Installation... 1
Software Manual Contents 1 Software Installation... 1 1.1 Overview...1 1.2 Software Installation... 1 2 Introduction To Basic Function...6 2.1 Login System... 6 2.2 CMS Operating Interface...6 2.2.1 Operating
More informationGuarding Expert Client Software. User Manual UD02162N
Guarding Expert Client Software User Manual UD02162N User Manual About this Manual This Manual is applicable to Guarding Expert Client Software. The Manual includes instructions for using and managing
More informationNVMS1000. User Manual
NVMS1000 User Manual Contents 1 Software Introduction... 1 1.1 Summary... 1 1.2 Operation Environment... 1 1.3 Install and Uninstall... 2 1.3.1 Install the Software... 2 1.3.2 Uninstall the Software...
More informationivms-4200 Client Software User Manual UD.6L0206D1056A01
ivms-4200 Client Software User Manual UD.6L0206D1056A01 User Manual COPYRIGHT 2015 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others,
More informationTRIDENT - CMS Plus. 64CH Central Management System Software
TRIDENT - CMS Plus 64CH Central Management System Software Please read instructions thoroughly before operation and retain it for future reference. For video demonstration about CMS Lite operation, please
More informationIMS Client Operation Guide Version V1.1 Date
Version V1.1 Date 2015-10-20 About This Document About This Document About This User Manual Please note the following points before using this user manual: This user manual is intended for persons who
More informationPro7804N1 NVR User Manual
Pro7804N1 NVR User Manual Pro7804N1 User Manual BW R6.indd 1 User Information Admin User Name: Admin Password: IP Address: System Name: Table Of Contents 1. Menu Operation...4 1.1 Main Menu...4 2. Start
More informationGV-Eye Mobile App. Contents
GV-Eye Mobile App. Contents 1.1 Specifications... 2 1.2 Supported GV-IP Devices and Software... 3 1.2.1 Supported Products for Connection... 3 1.2.2 Supported Products for Enabling Monitoring... 4 1.2.3
More informationDSS Pro FAQ. Ver:
DSS Pro FAQ Ver: 7.01.000 Contents 1 Installation and Deployment... 1 1.1 What kind of OS can install DSS Pro?... 1 1.2 What kind of performance of server can install DSS Pro?... 1 1.3 Browser Compatibility
More informationSTORM Video Management Software User s Manual
STORM Video Management Software User s Manual Version 2.0.1 Table of Contents 1. OVERVIEW AND ENVIRONMENT... 1 1.1 Overview... 1 1.2 STORM Interface... 1 2. LOGIN... 5 2.1 Initialize Device... 5 2.2 Login
More informationSecuGuard. Basic 5.0. Version: xxx
SecuGuard Basic 5.0 Ł` ˆª Ø Version: 5.0.2.xxx SecuGuard Basic ` Ø ˆ ˆ...6 ˆ Ø...7 Ł ˆ Ø»ˆÆ ˆ`... 7 ˆŁ` ˆ Ø»ˆÆ ˆ`... 7 Ø Æ Ł...10 Ø IP Camera(s)... 10 Ł` IP Camera(s)... 10 ˆ Ø Ł ˆ ˆ :... 14 Playback:...
More informationPIVOT CMS CLIENT SOFTWARE USER MANUAL
PIVOT CMS CLIENT SOFTWARE USER MANUAL 1 CMS USER GUIDE 1.1 PC REQUIREMENT Recommended PC Requirement OS CPU VGA RAM HDD Graphics Card OS CPU VGA RAM HDD Windows Vista, 7 or higher Intel Core2Quad Q9400
More informationPro7400H1 Hybrid DVR User Manual
Pro7400H1 Hybrid DVR User Manual User Information Admin User Name: Admin Password: IP Address: System Name: Table Of Contents 1. Menu Operation... 4 1.1 Main Menu... 4 2. Start Up/Shutdown System... 5
More informationError! Bookmark not defined.
HD-NVR user manual Directory Part one Basic Operation... 3 1. Basic Installation... 3 1.1 Hard Disk Installation... 3 1.2 Mouse Connection... 3 2. Starting... 3 3.Turn Off... 3 4.Login... 4 5.Preview...
More informationCMS operation instruction. Video Surveillance Management Platform Operation Instruction
Video Surveillance Management Platform Operation Instruction 1 Item 1 System function overview...3 2 System environment requirements...3 3 Software installation and uninstall... Hiba! A könyvjelző nem
More informationUser`s Manual. CMS Pro. Professional Central Monitoring Software. Full-featured Enterprise Class Surveillance Solution
Professional Central Monitoring Software CMS Pro Full-featured Enterprise Class Surveillance Solution User`s Manual This document contains preliminary information and is subject to change without notice.
More informationNVMS7000 Client Software User Manual
NVMS7000 Client Software User Manual i User Manual About this Manual This Manual is applicable to NVMS7000 Client Software. The Manual includes instructions for using and managing the product. Pictures,
More informationContents. 1.2 Software Installation... 1
Software Manual Contents 1 Software Installation... 1 1.1 Overview...1 1.2 Software Installation... 1 2 Introduction To Basic Function...5 2.1 Login System... 5 2.2 CMS Operating Interface...5 2.2.1 Operating
More informationDigital Video Surveillance Center Management Software
Digital Video Surveillance Center Management Software NVClient User Manual Revision: V3.2 Updated: 12-2011 Contents Chapter I General...- 3-1.1 INTRODUCTION... - 3-1.2 MAIN FUNCTIONS... - 3 - Chapter II
More informationProject Name SmartPSS
V2.00.1 Language Farsi, Arabic, Russian, Japanese, Korean, Turkish, Vietnamese, Thai, Indonesian, Traditional Chinese, Hebrew, Spanish, Portuguese, French, Dutch, Italian, German, Czech, Slovakia, Hungarian,
More informationLocal Playback Software User Manual
Local Playback Software User Manual UD.6L0202D1299A01 Thank you for purchasing our product. This manual applies to Local Playback software, please read it carefully for the better use of this software.
More informationUser s Manual. Surveillance Client PC Software for Windows OS & Mac OS Central Management Software. Surveillance Client
User s Manual Surveillance Client PC Software for Windows OS & Mac OS Central Management Software Surveillance Client Contents 1 Product Description...4 1.1 Important Disclaimer...4 1.2 Software Related
More informationHikCentral Control Client. User Manual
HikCentral Control Client User Manual Legal Information User Manual 2018 Hangzhou Hikvision Digital Technology Co., Ltd. About this Manual This Manual is subject to domestic and international copyright
More informationivms-4200 Client Software ivms-4200 Main Features Live View Recording Alarm Management
ivms-4200 Client Software ivms-4200 is versatile video management software for the DVRs, NVRs, IP cameras, encoders, access control devices, security control panels, video intercom devices, decoders, VCA
More informationVideo Surveillance Management Software NVClient V6 User Manual
Video Surveillance Management Software NVClient V6 User Manual Version: V6.2 Update Date: 2017/5/8 Preface Thank you for using the company's products, please read this manual carefully before using, have
More informationMirasys NVR. User s Guide
Mirasys NVR User s Guide CONTENTS Contents... 2 Before you start... 3 Introduction... 6 Logging in... 9 User interface... 13 Navigator... 16 Cameras... 25 Video outputs... 41 Digital outputs... 46 Digital
More informationIphone OS and Android
AHD Hybrid Digital Video Recorder Mobile phone application user manual Iphone OS and Android Model : 720P AHD DVR MT884 MT888 MT8816 1080P AHD DVR MT894 MT898 MT8916 www.magtec.com.my Contents 1 Network
More informationCAMERAS IP START SERIES
CAMERAS IP START SERIES Contents 1. Login Interface... 3 2. Preview... 4 2.1 Open/Close Preview... 5 2.2 Full-screen Preview... 5 2.3 Electronic Zoom-in... 5 2.3 PTZ Control... 6 3. File Management...
More informationClient Workstation Software
Client Workstation Software User and Administration Manual Version 8.5 Rev. 11/12/2012 Client Workstation Software All rights reserved. No parts of this work may be reproduced in any form or by any means
More informationUser Manual of ivms ivms-4200 Client Software. User Manual UD07013B
ivms-4200 Client Software User Manual 1 UD07013B User Manual COPYRIGHT 2017 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings,
More informationVideo recorders Series DH
Page: 1 DVRs for analog cameras, 960H, HD-SDI Viewclient Program Manual How to install and use the client program to the DVR Page: 2 Contents of this handbook This manual describes how to install and use
More informationDSS Pro FAQ. Ver:
DSS Pro FAQ Ver: 7.01.000 Contents 1 Installation and Deployment... 1 1.1 What kind of OS can install DSS Pro?... 1 1.2 What kind of performance of server can install DSS Pro?... 1 1.3 Browser Compatibility
More informationHikCentral Quick Start Guide
HikCentral Quick Start Guide Quick Start Guide COPYRIGHT 2018 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures,
More informationDS-1100KI Network Keyboard User Manual V 2.1.0
DS-1100KI Network Keyboard User Manual V 2.1.0 (V2.0) Preventive and Cautionary Tips Before connecting and operating your keyboard, please be advised of the following tips: Ensure unit is placed in a well-ventilated,
More informationUser Manual of Client Software for Embedded DVRDVS (Version 1.4)
User Manual of Client Software for Embedded DVRDVS (Version 1.4) 1 Index Version Description...3 Chapter 1 Client Software Installation...6 1.1 Notice...6 1.2 Installation...7 Chapter 2 Client Software
More informationEnterprise Pro Surveillance System User s Manual
Enterprise Pro Surveillance System User s Manual 1 Table of Contents 1 FEATURES... 6 2 INSTALLATION... 8 2.1 Environment...8 2.2 Installation...8 2.3 Un-installation...10 3 NAVIGATION AND CONTROLS OF THE
More informationTable of Contents Surveillance Center Overview...3 Log...30 Live Camera Panel...31 Live Camera Panel Explained I...32
Surveillance Center Overview...3 Introduction...3 System Requirements... 4 Features... 5 Checking the Hardware Requirements... 6 Installing and Accessing the Module... 8 Connecting a Camera to the Network...
More informationEASI MP-X Series. User Manual EASI MPR. Workstation. MPR Workstation user manual, , rev003
EASI MP-X Series User Manual EASI MPR Workstation MPR Workstation user manual, 59300234, rev003 Contents MPR Workstation Introduction...1 General...1 Software version...1 Structure of the Network...1 Workstation
More informationUser s Manual of DVR ULTIMAX. Remote Client Software V wersja 2.40
User s Manual of DVR ULTIMAX Remote Client Software V 4.0.1 ULTIMAX-304 ULTIMAX-308 ULTIMAX-316 ULTIMAX-504 ULTIMAX-508 ULTIMAX-516 ULTIMAX-704 ULTIMAX-708 ULTIMAX-716 wersja 2.40 Index 1 Software Install,
More informationPCMS User Manual. User Manual PCMS. A-Series DVR (Cloud)
PCMS User Manual A-Series DVR (Cloud) User Manual PCMS User Manual PCMS A-Series DVR (Cloud) 1 PCMS User Manual A-Series DVR (Cloud) Contents 1. Brief Introduction... 3 2. Application... 3 3. OS Compatibility...
More informationUser`s Manual. Intuitive Software icms. Convenient & Versatile Software MADE IN KOREA
Convenient & Versatile Software Intuitive Software icms User`s Manual MADE IN KOREA M3119iCMSDR This document contains preliminary information and is subject to change without notice. icms4 Table of Contents
More informationGV-Eye Mobile App. Contents
GV-Eye Mobile App. Contents 1.1 Specifications... 2 1.2 Supported GV-IP Devices and Software... 3 1.2.1 Supported Products... 3 1.2.2 Supported Products for Monitoring Activation... 4 1.2.3 Supported Products
More informationHikCentral Control Client. User Manual
HikCentral Control Client User Manual Legal Information User Manual 2018 Hangzhou Hikvision Digital Technology Co., Ltd. About this Manual This Manual is subject to domestic and international copyright
More informationMulti-NVR Manager. Quick Start Configuration Usage
Multi-NVR Manager Quick Start Configuration Usage 2014. All rights are reserved. No portion of this document may be reproduced without permission. All trademarks and brand names mentioned in this publication
More informationQuick Start Guide GV-VMS
Quick Start Guide GV-VMS Thank you for purchasing GV-VMS. This guide is designed to assist the new user in getting immediate results from the GV-VMS. For advanced information on how to use the GV-VMS,
More informationHIP2P Network Video Camera Client Terminal User Manual
HIP2P Network Video Camera Client Terminal User Manual Document version:5.1 Page 1 of 34 } Preface Thank you for using our company's products. The network video camera client terminal is used to implement
More informationSmart CMS Client HiP2P User Manual. Version:V2018.5
Smart CMS Client HiP2P User Manual http://iotsmatsolutions.net Version:V2018.5 1 1. Smart CMS client installation Please follow below steps to install the SMART CMS client monitoring system software; On
More informationIMS200 SURVEILLANCE SYSTEM USER MANUAL
IMS200 SURVEILLANCE SYSTEM USER MANUAL 1 PRECAUTIONS The contents of this manual may change due to product upgrades or other reasons. We have the right to make changes of the contents without notice. This
More informationQuick Reference Guide. For IL6000HB Series NetDVR
Quick Reference Guide For IL6000HB Series NetDVR Directory 1. Features and Specifications.1 2. Physical Interface 2 2.1 Front Panel and Interior of Product 2 2.2 Rear Panel of Product..3 3. Software Main
More informationGV-Eye Mobile App. Contents
GV-Eye Mobile App. Contents GV-Eye... 2 1.1 Specifications... 2 1.2 Supported GV-IP Devices and Software... 3 1.2.1 Supported Products... 3 1.2.2 Supported Products for Monitoring Activation... 4 1.2.3
More informationDigital Recorder End User Guide. Official UK distribution partner
Digital Recorder End User Guide Official UK distribution partner 2 Installer Information Contents General Operation Mouse Operation Logging into the System Quick Menu PTZ Control 4 5 5 6 Playback Operation
More informationivms-4000(v2.03) User Manual
ivms-4000(v2.03) User Manual Table of Contents ivms-4000(v2.03)...2 User Manual...2 Table of Contents...1 Chapter 1 Welcome to ivms-4000 (V2.03)...4 1.1 Overview...4 1.2 Computer Disposition Request...4
More informationNVR Equipment WEB Operation Guide ISSUE V1.1 DATE
NVR Equipment WEB Operation Guide ISSUE V1.1 DATE 2018-05-15 About This Document About This Document Purpose This document describes how to use the web management system for NVR and the cameras managed
More informationGuarding Expert (Android) Mobile Client Software
Overview Guarding Expert (Android) V3.2 mobile client software, which is designed for mobile phone on the basis of Android OS (Version 2.3.3 or higher), can be used to remotely monitor the live video from
More informationProduct and company names appearing in this document are trademarks of each respective company or organization.
. CMS_beta LEGAL INFORMATION Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of the company is prohibited.
More informationCMS Client Software Operation
CMS Client Software Operation 1. Download CMS...2 2. Add,delete,connect the NVR IP...2 2. View many DVR images at the same time...3 3. Intercom...5 4. Capture...6 5. PTZ control...6 6. NVR Status...7 7.
More informationDigital Recorder End User Guide
Digital Recorder End User Guide metcalfeallen www.metcalfeallen.co.uk - 01884 38222 - admin@metcalfeallen.co.uk Installer Information Metcalfe Allen Ltd Unit 7 Saunders Way Kingsmill Industrial Estate
More informationOverview CMS2. Features. Minimum System Requirements (Single site mode) Preferred System Requirements (Multi-site mode) What is CMS2?
CMS2 1 Overview CMS2 What is CMS2? CMS2 is NUVICO s new central management software compatible with our EV2 (960H) Series, Hydra HD Series, EasyNet DVR, NVR Series, and our HDoCS HD-TVI series. CMS2 has
More information