Symphony SoundBite: Quick Start with Symphony Studio. Installation and Configuration
|
|
|
- Sylvia Richard
- 5 years ago
- Views:
Transcription
1 Symphony SoundBite: Quick Start with Symphony Studio Installation and Configuration Document Number: DSPB56371UGQS Rev. 2 September 2008
2 How to Reach Us: Home Page: USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH N. Alma School Road Chandler, Arizona or Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen Muenchen, Germany (English) (English) (German) (French) support@freescale.com Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo , Japan or support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center 2 Dai King Street Tai Po Industrial Estate Tai Po, N.T., Hong Kong support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado or Fax: LDCForFreescaleSemiconductor@hibbertgroup.com Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals, must be validated for each customer application by customer s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. Freescale Semiconductor, Inc All rights reserved.
3 Contents About This Document...4 Chapter 1 Introduction Symphony SoundBite Hardware...5 Chapter 2 Configuring Symphony Studio Installation Initial Configuration External Tool Debug Configuration...7
4 About This Document This document details the installation and configuration particulars for Symphony Studio when used with the Symphony SoundBite development board. Audience This guide is intended for new users to Symphony Studio and the Symphony SoundBite development board. Organization This document is organized into the following chapters: Chapter 1 Chapter 2 Introduction to Symphony SoundBite Installation and initial configuration guide for Symphony Studio References For more information, see the following documents: Symphony SoundBite: Reference Manual Symphony Studio: Eclipse for Symphony DSPs User s Guide Symphony SoundBite: Assembly Project Template User s Guide Symphony SoundBite: Demo Application User s Guide 4
5 Chapter 1 Introduction Symphony Studio is a new integrated development environment (IDE) that supports Freescale s Symphony family of 24-bit digital signal processors. Symphony Studio differs substantially from the previous suite of development tools for these DSPs. This document provides a brief introduction to this new IDE particularly as it relates to software development for the Symphony SoundBite target hardware. This document is meant to supplement the user s guides included with the Symphony Studio installation. It contains information and configuration particular to the use of Symphony Studio with the Symphony SoundBite development board. 1.1 Symphony SoundBite Hardware The Symphony SoundBite is an inexpensive but feature-packed solution for audio digital signal processing based on the DSPB56371 digital signal processor. The Symphony SoundBite supports the simultaneous input and output of eight channels of analog audio or six channels of analog with digital stereo optical SP/DIF through the eight 3.5 mm stereo jacks on the board. Sample rates of up to 192 khz are supported with the four 24-bit stereo codecs mounted on the board. A serial I2C EEPROM provides non-volatile storage for the DSP as well as also allowing the board to operate stand-alone (DSP application code is stored in the EEPROM). An eight-position DIP switch and nine LEDs are connected to GPIO pins on the DSP and are available for user interaction and indication. An expansion header is provided to facilitate off-board expansion. The on-board USB interface is built around the FT It provides for low-level JTAG and OnCE debugging capability with the use of Symphony Studio. Symphony Studio allows application development in assembly alone or C and assembly. Additionally, it provides for high-level SPI and I2C communication via the DSP s SHI port, which provides data pipe between the host PC and the DSP. Data or application code can be transmitted through the data pipe. 5
6 Chapter 2 Configuring Symphony Studio 2.1 Installation This installation guide refers to the production release of Symphony Studio Newer versions might be different than what is described here. If you are installing a different version, refer to the notes for that release for more details. Begin the installation process by launching the installation utility Symphony_Studio_IDE.exe. Follow the instructions of the installer as they are presented. Pay particular attention to the installation path of Symphony Studio. No spaces are permitted in the pathname with the current release, so the usual Program File installation directory is not usable. The default C:\Symphony-Studio is preferred and is assumed throughout. When the installation is complete, a dialog box with several checkbox options is presented. The built-in USB-to- JTAG command converter on the Symphony SoundBite board requires the FTD2XX drivers to be installed. Leave the FTD2XX box checked in this final dialog box and click Finish. 2.2 Initial Configuration Launch Symphony Studio. On the first launch, the Workspace Launcher dialog box will be presented. The default workspace name is workspace and is placed in the user s working directory. The name and location may be changed. The default name and location is assumed throughout. Click OK. Once it is fully launched, the newly created workspace opens with a Welcome window. Perform the following steps: 1. Click the Workbench icon, which looks like an arrow rolled over on itself. 2. Right-click the Resource button in the upper right corner of the window and select Close. 3. Click the Open Perspective button near the top center and select Debug. 4. Click the Open Perspective button again (now next to the Debug button on the upper right) and select C/C++. The two clickable buttons in the upper right corner of the Symphony Studio window are used for changing between the two perspectives, C/C++ and Debug. The C/C++ perspective is where all the project management and editing or coding occurs. The Debug perspective is where the debugging activities occur. The workspace is now configured in the default state that is assumed throughout. 6
7 2.3 External Tool An external tool is the mechanism by which the Symphony Studio GUI debugger connects to a target, where that target might be actual target hardware or the software simulator. The target can be locally connected to the host PC, or remotely connected. That is, when it is remotely connected, it is running on a separate machine but accessible through the TCP/IP network by the host machine. In either case, the external tool is software that listens on a TCP/IP port for a connection from the debugger, and then relays data between the debugger and the target. To create the external tool configuration for the Symphony SoundBite, perform the following steps. 1. Select the dropdown menu Run > External Tools > External Tools. 2. Select the External Tool template OpenOCD GDB Server. 3. Double-click the selection or click on the New Launch Configuration button. The New Launch Configuration button looks like a sheet of paper with a yellow + on it. 4. Choose in the Device pull down menu and choose soundbite in the Dongle pull down menu. 5. Connect the Symphony SoundBite board to the host PC and allow Windows time to recognize and install the drivers. 6. After the hardware is ready, click the Run button to launch the External Tool. After launching, the console tab should display a single status line with no errors similar to the following: Info: openocd.c:82 main(): Open On-Chip Debugger ps001 ( :00 CEST) If an error message occurs (displayed on the line below the info line above), re-launch the External Tool for Symphony SoundBite. Sometimes OpenOCD is unable to immediately connect to the debugger port of the DSP Also, once an External Tool configuration has been launched, it can be re-launched by using the numbered entry in the Run > External Tools history submenu or the Run button in the button bar of the Symphony Studio window (the button that has a green circle with a white triangle in it with a little red toolbox in the lower right corner). 2.4 Debug Configuration The Commands tab in Symphony Studio is where Gnu debugger commands can be specified to be executed at the beginning of a debug session (Initialize commands) or to be executed any time application code from a project is executed (Run commands). Since the debugger is not able to reset the DSP through the JTAG/OnCE port, the DSP56371 on the Symphony SoundBite requires the DSP to be forced into a reset-like state so that all queued interrupts are cleared and all the on-chip peripherals are reset. The processor state is not changed, so application code cannot assume that core registers are in their default reset states. The Initialize commands are used to force a reset-like state during the Initialize phase of debugging, before any application code is downloaded or run. 7
8 When using the Freescale Debug configuration, Symphony Studio automatically configures the Debug launch configuration to force the DSP on the Symphony SoundBite into the reset-like state. You can verify this by performing the following steps: 1. Select the Run > Debug... menu to open the Debug configuration dialog box. 2. Select the Symphony SoundBite debug configuration. If this is not a selection, create it using the Freescale template. 3. Click on the Commands tab. In the Initialize commands text box, verify that the following four lines of text are included: M p:0 0x M p:1 0x set $pc=0 cont Line 1 writes the value 0x84, which is the opcode for the RESET instruction, at P:0. Line 2 writes the value 0x200, which is the opcode for the DEBUG instruction, at P:1. Line 3 changes the DSP s PC to 0. Line 4 instructs the debugger to tell the DSP to begin executing instructions normally, stopping at the DEBUG instruction at P:1. These four instructions are executed every time a Debug configuration is launched and before the project s application code is downloaded. 8
Upgrade the Solution With No Changes 2 Upgrade the Solution With No Changes If a Codebase does not contain updates to its properties, it is possible t
Freescale Semiconductor Application Note Document Number: AN3819 Rev. 0.0, 02/2009 Methods for Upgrading Freescale BeeStack Codebases 1 Introduction This note describes how to upgrade an existing Freescale
PCB Layout Guidelines for the MC1321x
Freescale Semiconductor Application Note Document Number: AN3149 Rev. 0.0, 03/2006 PCB Layout Guidelines for the MC1321x 1 Introduction This application note describes Printed Circuit Board (PCB) footprint
Electrode Graphing Tool IIC Driver Errata Microcontroller Division
Freescale Semiconductor User Guide Addendum TSSEGTUGAD Rev. 1, 03/2010 Electrode Graphing Tool IIC Driver Errata by: Microcontroller Division This errata document describes corrections to the Electrode
Component Development Environment Installation Guide
Freescale Semiconductor Document Number: PEXCDEINSTALLUG Rev. 1, 03/2012 Component Development Environment Installation Guide 1. Introduction The Component Development Environment (CDE) is available as
MPC8349E-mITX-GP Board Errata
Freescale Semiconductor Document Number: MPC8349EMITX-GPBE Rev. 2, 01/2007 MPC8349E-mITX-GP Board Errata This document describes the known errata and limitations of the MPC8349E-mITX-GP reference platform.
56F8300 BLDC Motor Control Application
56F8300 BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document 56F8300 16-bit Digital Signal Controllers 8300BLDCQETD Rev. 2 08/2005 freescale.com Document
Mechanical Differences Between the 196-pin MAP-BGA and 196-pin PBGA Packages
Freescale Semiconductor Engineering Bulletin EB360 Rev. 1, 10/2005 Mechanical Differences Between the 196-pin MAP-BGA and 196-pin PBGA Packages This document describes the differences between the 196-pin
ColdFire Convert 1.0 Users Manual by: Ernest Holloway
Freescale Semiconductor CFCONVERTUG Users Guide Rev.0, 09/2006 ColdFire Convert 1.0 Users Manual by: Ernest Holloway The ColdFire Convert 1.0 (CF) is a free engineering tool developed to generate data
Using IIC to Read ADC Values on MC9S08QG8
Freescale Semiconductor Application Note AN3048 Rev. 1.00, 11/2005 Using IIC to Read ADC Values on MC9S08QG8 by Donnie Garcia Application Engineering Microcontroller Division 1 Introduction The MC9S08QG8
56F805. BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document. 56F bit Digital Signal Controllers
56F805 BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document 56F800 6-bit Digital Signal Controllers 805BLDCQETD Rev. 08/2005 freescale.com BLDC Motor Control
USB Bootloader GUI User s Guide
Freescale Semiconductor User s Guide Document Number: MC9S08JS16UG Rev. 0, 10/2008 USB Bootloader GUI User s Guide by: Derek Liu Applications Engineering China 1 Overview The MC9S08JS16 (JS16) supports
Using the Project Board LCD Display at 3.3 volts
Freescale Semiconductor SLK0100AN Application Note Rev. 0, 1/2007 By: John McLellan Applications Engineering Austin, TX 1 Introduction This document guides you through the steps necessary to use the LCD
Using the Multi-Axis g-select Evaluation Boards
Freescale Semiconductor Application Note Rev 2, 10/2006 Using the Multi-Axis g-select Evaluation Boards by: Michelle Clifford and John Young Applications Engineers Tempe, AZ INTRODUCTION This application
HC912D60A / HC912Dx128A 0.5µ Microcontrollers Mask sets 2K38K, 1L02H/2L02H/3L02H & K91D, 0L05H/1L05H/2L05H
Freescale Semiconductor Engineering Bulletin EB664 Rev. 6, 08/2006 HC912D60A / HC912Dx128A 0.5µ Microcontrollers Mask sets 2K38K, 1L02H/2L02H/3L02H & K91D, 0L05H/1L05H/2L05H by: Devaganesan Rajoo HC12
MC33696MODxxx Kit. 1 Overview. Freescale Semiconductor Quick Start Guide. Document Number: MC33696MODUG Rev. 0, 05/2007
Freescale Semiconductor Quick Start Guide Document Number: MC33696MODUG Rev. 0, 05/2007 MC33696MODxxx Kit by: Laurent Gauthier Toulouse, France 1 Overview This document provides introductory information
Updating the Firmware on USB SPI Boards (KITUSBSPIEVME, KITUSBSPIDGLEVME)
Freescale Semiconductor User s Guide Document Number: KTUSBSPIPRGUG Rev. 1.0, 7/2010 Updating the Firmware on USB SPI Boards (KITUSBSPIEVME, KITUSBSPIDGLEVME) Figure 1. KITUSBSPIEVME and KITUSBSPIDGLEVME
56F805. Digital Power Factor Correction using Processor Expert TM Targeting Document. 56F bit Digital Signal Controllers. freescale.
56F805 Digital Power Factor Correction using Processor Expert TM Targeting Document 56F800 6-bit Digital Signal Controllers 805DPFCTD Rev. 0 08/2005 freescale.com Digital Power Factor Correction This
etpu General Function Set (Set 1) David Paterson MCD Applications Engineer
Freescale Semiconductor Application Note Document Number: AN2863 Rev. 0, 12/2007 etpu General Function Set (Set 1) by David Paterson MCD Applications Engineer 1 Introduction This application note complements
MPC8260 IDMA Timing Diagrams
Freescale Semiconductor Application Note Document Number: AN2177 Rev. 4, 07/2006 MPC8260 IDMA Timing Diagrams By DSD Applications, NCSG Freescale Semiconductor, Inc. The MPC8260 PowerQUICC II integrated
EchoRemote Evaluation Software for Windows
Freescale Semiconductor Application Note Document Number: AN2953 Rev.1, 05/2007 EchoRemote Evaluation Software for Windows 1 Overview EchoRemote is a Microsoft Windows program that communicates with the
Freescale BeeStack Documentation Overview Document Number: BSDO Rev /2008
Freescale BeeStack Documentation Overview Document Number: BSDO Rev. 1.0 04/2008 How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale
Design Recommendations to Implement Compatibility Between the MC13783VK and the MC13783VK5
Freescale Semiconductor Application Note Document Number: AN3417 Rev. 0.1, 01/2010 Design Recommendations to Implement Compatibility Between the MC13783VK and the MC13783VK5 by: Power Management and Audio
SGTL5000 I 2 S DSP Mode
Freescale Semiconductor Application Note Document Number: AN3664 Rev. 2, 11/2008 SGTL5000 I 2 S DSP Mode by Name of Group Freescale Semiconductor, Inc. Austin, TX 1 Description SGTL5000 supports multiple
MC56F825x/MC56F824x (2M53V) Chip Errata
Freescale Semiconductor MC56F825XE_2M53V Chip Errata Rev. 1, 05/2012 MC56F825x/MC56F824x (2M53V) Chip Errata The following errata items apply to devices of the maskset 2M53V. 2012 Freescale Semiconductor,
MC33794 Touch Panel System Using E-Field Sensor Setup Instructions
Freescale Semiconductor MC33794SIUG User s Guide Rev. 1.0, 09/2005 MC33794 Touch Panel System Using E-Field Sensor Setup Instructions Reference Design Documentation for RDMC33794 This document contains
Functional Differences Between the DSP56307 and DSP56L307
Freescale Semiconductor Engineering Bulletin EB361 Rev. 3, 10/2005 Functional Differences Between the DSP56307 and DSP56L307 The DSP56307 and DSP56L307, two members of the Freescale DSP56300 family of
Interfacing MPC5xx Microcontrollers to the MFR4310 FlexRay Controller David Paterson MCD Applications, East Kilbride
Freescale Semiconductor Application Note Document Number: AN3256 Rev. 2, 2/2008 Interfacing MPC5xx Microcontrollers to the MFR4310 FlexRay Controller by: David Paterson MCD Applications, East Kilbride
MTIM Driver for the MC9S08GW64
Freescale Semiconductor Application Note Document Number: AN4160 Rev. 0, 8/2010 MTIM Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group India IDC MSG NOIDA 1 Introduction
Optically-Isolated Multilink BDM Interface for the S08/S12 Microcontrollers by Michael A. Steffen
Freescale Semiconductor Application Note AN3589 Rev. 0, 02/2008 Optically-Isolated Multilink BDM Interface for the S08/S12 Microcontrollers by Michael A. Steffen 1 Introduction This application note explains
Interfacing HCS12 Microcontrollers to the MFR4200 FlexRay Controller
Freescale Semiconductor Application Note AN3216 Rev. 0, 2/2006 Interfacing HCS12 Microcontrollers to the MFR4200 FlexRay Controller by: David Paterson MCD Applications, East Kilbride 1 Introduction Freescale
Converting Earlier Versions of CodeWarrior for StarCore DSPs Projects to Version
Freescale Semiconductor Document Number: AN4253 Application Note Rev. 1, 01/2011 Converting Earlier Versions of CodeWarrior for StarCore DSPs Projects to Version 10.1.8 by DevTech Customer Engineering
etpu Automotive Function Set (Set 2)
Freescale Semiconductor Application Note Document Number: AN3768 Rev. 0, 05/2009 etpu Automotive Function Set (Set 2) by: Geoff Emerson East Kilbride U.K. 1 Introduction This application note complements
Pad Configuration and GPIO Driver for MPC5500 Martin Kaspar, EMEAGTM, Roznov Daniel McKenna, MSG Applications, East Kilbride
Freescale Semiconductor Application Note Document Number: AN2855 Rev. 0, 2/2008 Pad Configuration and GPIO Driver for MPC5500 by: Martin Kaspar, EMEAGTM, Roznov Daniel McKenna, MSG Applications, East Kilbride
Using the PowerQUICC II Auto-Load Feature
Freescale Semiconductor Application Note Document Number: AN3352 Rev. 0, 01/2007 Using the PowerQUICC II Auto-Load Feature by David Smith/Patrick Billings Field Application Engineering/DSD Applications
XGATE Library: ATD Average Calculating a rolling average from ATD results
Freescale Semiconductor Application Note AN3226 Rev. 0, 2/2006 XGATE Library: ATD Average Calculating a rolling average from ATD results by: Steve McAslan MCD Applications, East Kilbride 1 Introduction
Introduction to LIN 2.0 Connectivity Using Volcano LTP
Freescale Semiconductor White Paper LIN2VOLCANO Rev. 0, 12/2004 Introduction to LIN 2.0 Connectivity Using Volcano LTP by: Zdenek Kaspar, Jiri Kuhn 8/16-bit Systems Engineering Roznov pod Radhostem, Czech
Functional Differences Between DSP56302 and DSP56309 (formerly DSP56302A)
Freescale Semiconductor Engineering Bulletin EB346 Rev. 3, 10/2005 Functional Differences Between DSP56302 and DSP56309 (formerly DSP56302A) To meet the increasing demands for higher performance and lower
MPC5200(b) ATA MDMA, UDMA Functionality BestComm Setup Recommendations
Freescale Semiconductor Engineering Bulletin Document Number: EB711 Rev. 0, 05/2009 MPC5200(b) ATA MDMA, UDMA Functionality BestComm Setup Recommendations by: Peter Kardos Application Engineer, Roznov
MC33897 Single-Wire CAN Transceiver Reliability and Quality Documents
Freescale Semiconductor Reliability & Qualifications RQA33897 Rev. 2.0, 8/2006 MC33897 Single-Wire CAN Transceiver Reliability and Quality Documents The device(s) in this document successfully completed
Clock Mode Selection for MSC8122 Mask Set K98M
Freescale Semiconductor Application Note AN2904 Rev. 0, 11/2004 Clock Mode Selection for MSC8122 Mask Set K98M By Donald Simon and Wes Ray This application note describes the MSC8122 clock modes for mask
MSC8144AMC-S Getting Started Guide
Freescale Semiconductor Hardware Getting Started Guide Document Number: MSC8144AMCSHWGSG Rev. 2, 07/2008 MSC8144AMC-S Getting Started Guide This document describes how to connect the MSC8144AMC-S card
MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnLE Series
Freescale Semiconductor Technical Data Document Number: MPC7410ECS08AD Rev. 1, 11/2010 MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnLE Series This document describes
MPR083 Proximity Evaluation Kit User s Guide
Freescale Semiconductor User s Guide Rev 2, 04/2008 MPR083 Proximity Evaluation Kit User s Guide by: Laura Salhuana Introduction This guide will aid you in connecting the MPR083 Evaluation Kit Board to
MCF5216 Device Errata
Freescale Semiconductor Device Errata MCF5216DE Rev. 1.7, 09/2004 MCF5216 Device Errata This document identifies implementation differences between the MCF5216 processor and the description contained in
MCF5445x Configuration and Boot Options Michael Norman Microcontroller Division
Freescale Semiconductor Application Note Document Number: AN3515 Rev. 1, 04/2008 MCF5445x Configuration and Boot Options by: Michael Norman Microcontroller Division 1 Configuration Modes The Freescale
DSP56F827 Digital Signal Controller
Freescale Semiconductor DSP56F827E Rev. 8.0, 12/2005 56F827 Chip Errata DSP56F827 Digital Signal Controller This document reports errata information on chip revision B. Errata numbers are in the form n.m,
Migrating from the MPC852T to the MPC875
Freescale Semiconductor Application Note Document Number: AN2584 Rev. 1, 1/2007 Migrating from the MPC852T to the MPC875 by Ned Reinhold NCSD Applications Freescale Semiconductor, Inc. Austin, TX This
Integrating FreeMASTER-Time Debugging Tool with CodeWarrior for Microcontrollers v10.x Project
Freescale Semiconductor Application Document Number: AN4771 Integrating FreeMASTER-Time Debugging Tool with CodeWarrior for Microcontrollers v10.x Project 1. Introduction This application note describes
56F Phase AC Induction Motor V/Hz Control using Processor ExpertTM Targeting Document 56F bit Digital Signal Controllers
56F8300 3-Phase AC Induction Motor V/Hz Control using Processor Expert TM Targeting Document 56F8300 16-bit Digital Signal Controllers 8300ACIMTD Rev. 1 08/2005 freescale.com Document Revision History
Differences Between the DSP56301, DSP56311, and DSP56321
Freescale Semiconductor Engineering Bulletin Document Number: EB724 Rev. 0, 11/2009 Differences Between the DSP56301, DSP56311, and DSP56321 This engineering bulletin discusses the differences between
Gallium Arsenide PHEMT RF Power Field Effect Transistor
Technical Data Available at http://www.freescale.com/rf, Go to Tools Rev., 6/2005 Reference Design Library Gallium Arsenide PHEMT Power Field Effect Transistor Device Characteristics (From Device Data
Affected Chips Description Impact and Workaround
Freescale Semiconductor MC56F8013E Rev. 3, 08/2007 56F8013 Preliminary Chip 56F8013 Digital Signal Controller numbers are in the form n.m, where n is the number of the errata item and m identifies the
Power Cycling Algorithm using the MMA73x0L 3-Axis Linear Accelerometer
Freescale Semiconductor Application Note Rev 1, 06/2007 Power Cycling Algorithm using the MMA73x0L 3-Axis Linear Accelerometer by: Kimberly Tuck Accelerometer Systems and Applications Engineering Tempe,
MPR121 Jitter and False Touch Detection
Freescale Semiconductor Application Note Rev 1, 03/2010 MPR121 Jitter and False Touch Detection INTRODUCTION Touch acquisition takes a few different parts of the system in order to detect touch. The baseline
2005: 0.5 PQ-MDS-PCIEXP
HW Getting Started Guide PQ-MDS-PCIEXP Adaptor December 2005: Rev 0.5 PQ-MDS-PCIEXP Adaptor HW Getting Started Guide Step 1:Check HW kit contents 1.PQ-MDS-PCIEXP Adaptor 2.PIB (Platform I/O Board) to PCIEXP
XGATE Library: Using the Freescale XGATE Software Library Steve McAslan MCD Applications, East Kilbride
Freescale Semiconductor Application Note AN3145 Rev. 0, 2/2006 XGATE Library: Using the Freescale XGATE Software Library by: Steve McAslan MCD Applications, East Kilbride 1 Introduction The Freescale S12X
Getting Started with the Student Learning Kit Application Module Using the MC9S12DT256 Microcontroller Application Module
Freescale Semiconductor APS12DT256PG Quick Reference Guide Rev. 0, 9/2007 Getting Started with the Student Learning Kit Application Module Using the MC9S12DT256 Microcontroller Application Module For use
Programming the Keyboard Interrupt Module (KBI) on HC(S)08 MCUs
Freescale Semiconductor Application Note AN2900 Rev. 0, 01/2005 Programming the Keyboard Interrupt Module (KBI) on HC(S)08 MCUs by: Gabriel Sanchez Barba RTAC Americas Mexico Overview This document is
Utilizing Extra FC Credits for PCI Express Inbound Posted Memory Write Transactions in PowerQUICC III Devices
Freescale Semiconductor Application Note Document Number: AN3781 Rev. 0, 06/2009 Utilizing Extra FC Credits for PCI Express Inbound Posted Memory Write Transactions in PowerQUICC III Devices This application
Managing Failure Detections and Using Required Components to Meet ISO7637 pulse 1 on MC33903/4/5 Common Mode Choke Implementation
Freescale Semiconductor Application Note AN3865 Rev. 1.0, 2/2010 Managing Failure Detections and Using Required Components to Meet ISO7637 pulse 1 on MC33903/4/5 Common Mode Choke Implementation 1 Overview
Keil uvision 4 Kinetis Support for Freescale MQX RTOS Release Notes
Keil uvision 4 Kinetis Support for Freescale MQX RTOS 3.7.0 Release Notes PRODUCT: Keil uvision 4 Kinetis Support for Freescale MQX RTOS 3.7.0 PRODUCT VERSION: 1.0 DESCRIPTION: Adding support for Keil
IIC Driver for the MC9S08GW64
Freescale Semiconductor Application Note Document Number: AN4158 Rev. 0, 8/2010 IIC Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group Noida India 1 Introduction This document
Using the Knock Window etpu Function
Freescale Semiconductor Application Note Document Number: AN3772 Rev. 0, 05/2009 Using the Knock Window etpu Function by: David Paterson 1 Introduction This application note provides simple C interface
56F Phase Switched Reluctance Motor Control With Hall Sensors using Processor Expert Targeting Document
56F8300 3-Phase Switched Reluctance Motor Control With Hall Sensors using Processor Expert Targeting Document MC56F8300 16-bit Digital Signal Controllers 8300SRMHSTD Rev. 0 2/2005 freescale.com Document
Using the Serial Peripheral Interface (SPI) Module on 68HC(9)08 Microcontrollers
Freescale Semiconductor Application te AN2878 Rev. 0, 01/2005 Using the Serial Peripheral Interface (SPI) Module on 68HC(9)08 Microcontrollers by: Rogelio Reyna García RTAC Americas Mexico Overview This
TLB Translation Setup for MPC745x and MPC744x in Non-Extended Mode
Freescale Semiconductor Application Note AN2796 Rev. 1, 5/2006 TLB Translation Setup for MPC745x and MPC744x in Non-Extended Mode by Amanuel Belay Computing Platform Division Freescale Semiconductor, Inc.
Implementing a Double-Precision (32-Bit) Complex FIR Filter on the MSC8101 Device
Freescale Semiconductor Application Note AN2208 Rev. 2, 12/2004 Implementing a Double-Precision (32-Bit) Complex FIR Filter on the MSC8101 Device By Tina Redheendran This document describes an optimized
Using an I 2 C EEPROM During MSC8157 Initialization
Freescale Semiconductor Application Note AN4205 Rev. 0, 11/2010 Using an I 2 C EEPROM During MSC8157 Initialization The MSC8157 family allows you to use an I 2 C EEPROM to to initialize the DSP during
16-bit MCU: S12XHY256 Automotive Cluster Demo by: Jose M. Cisneros Steven McLaughlin Applications Engineer Microcontroller Solutions Group, Scotland
Freescale Semiconductor Users Guide Document Number: S12XHY256ACDUG Rev. 0, 10/2010 16-bit MCU: S12XHY256 Automotive Cluster Demo by: Jose M. Cisneros Steven McLaughlin Applications Engineer Microcontroller
SynkroRF Network. User s Guide
SynkroRF Network User s Guide Document Number: SYNKROUG Rev. 1.2 06/2011 How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor
Simplified Device Data Structures for the High-End ColdFire Family USB Modules Melissa Hunter Applications Microcontroller Solutions Group
Freescale Semiconductor Application Note Document Number: AN3631 Rev. 0, 03/2008 Simplified Device Data Structures for the High-End ColdFire Family USB Modules by: Melissa Hunter Applications Microcontroller
Using the ColdFire+ Family Enhanced EEPROM Functionality Melissa Hunter Derrick Klotz
Freescale Semiconductor Application Note Document Number: AN4306 Rev. 0, 05/2011 Using the ColdFire+ Family Enhanced EEPROM Functionality by: Melissa Hunter Derrick Klotz 1 Introduction The ColdFire+ family
Ordering Information Industry standard SOT343R package Device weight = g (typical) Available only in tape and reel packaging Available only in
Freescale Semiconductor Technical Data Document Number: MBC13916/D Rev. 2.2, 05/2006 MBC13916 MBC13916 General Purpose SiGe:C RF Cascode Low Noise Amplifier 1 Introduction The MBC13916 is a costeffective,
MPXHZ6400A. Freescale Semiconductor Technical Data. MPXHZ6400A Rev 0, 08/2005
Freescale Semiconductor Technical Data Media Resistant and High Temperature Accuracy Integrated Silicon Pressure Sensor for Measuring Absolute Pressure, On-Chip Signal Conditioned, Temperature Compensated
MPC8260 SDRAM Timing Diagrams
Freescale Semiconductor Application Note Document Number: AN2178 Rev. 2, 07/2006 MPC8260 SDRAM Timing Diagrams The MPC8260 PowerQUICC II integrated communications processor provides one SDRAM interface
MPR121 Proximity Detection
Freescale Semiconductor Application Note Rev 0, 03/2010 MPR121 Proximity Detection INTRODUCTION MPR121 is a feature rich, second generation touch sensor controller after Freescale s initial release of
Using the CAU and mmcau in ColdFire, ColdFire+ and Kinetis
Freescale Semiconductor Document Number: AN4307 Application Note Rev. Rev.0, 5/ 2011 Using the CAU and mmcau in ColdFire, ColdFire+ and Kinetis by: Paolo Alcantara RTAC Americas Mexico 1 Introduction This
PDB Driver for the MC9S08GW64
Freescale Semiconductor Application Note Document Number: AN4163 Rev. 0, 8/2010 PDB Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group Noida India 1 Introduction This document
MCF54451, MCF54452, MCF54453, MCF54454,
Chip Errata MCF54455DE Rev. 5, 8/21 MCF54455 Chip Errata Revision: All Supports: MCF5445, MCF54451, MCF54452, MCF54453, MCF54454, and MCF54455 Summary of MCF5445x Errata The latest mask of the MCF5445x
Introduction to the S12G Family EEPROM Including a Comparison between the S08DZ, S12XE, and S12P Families
Freescale Semiconductor Application Note Document Number: AN4302 Rev. 0, 04/2011 Introduction to the S12G Family EEPROM Including a Comparison between the S08DZ, S12XE, and S12P Families by: Victor Hugo
Use of PGA on MC56F800x Interaction of PDB, PGA and ADC
Freescale Semiconductor Document Number: AN4334 Application Note Rev. 0, 03/2012 Use of PGA on MC56F800x Interaction of PDB, PGA and ADC by: William Jiang System and Application, Microcontroller Solutions
Using the Kinetis Family Enhanced EEPROM Functionality
Freescale Semiconductor Application Note Document Number: AN4282 Rev. 1, 03/2015 Using the Kinetis Family Enhanced EEPROM Functionality by: Melissa Hunter Derrick Klotz 1 Introduction Some of the Kinetis
Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated
Freescale Semiconductor Technical Data Rev 5, 05/2005 Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated The piezoresistive transducer is a state-of-the-art
Using the ColdFire EMAC Unit to Improve RSA Performance Jim Stephens Freescale Semiconductor
Application Note AN3038 Rev. 0, 09/2005 Using the ColdFire EMAC Unit to Improve RSA Performance by: Jim Stephens The widely used RSA public key cryptographic algorithm requires modular exponentiation of
PQ-MDS-QOC3 Module. HW Getting Started Guide. Contents. About This Document. Required Reading. Definitions, Acronyms, and Abbreviations
HW Getting Started Guide PQ-MDS-QOC3 Module July 2006: Rev. A Contents Contents........................................................................................ 1 About This Document..............................................................................
Figure 1. Power Barrel Connector Requirements
Freescale Semiconductor Quick Start Guide Rev. 0.1, 06/29/2004 DEMO9S12NE64 Demo Quick Start Guide Introduction This kit and guide contains everything you need to get started. You will connect the board
Using GCR4 to Adjust Ethernet Timing in MSC8144 DSPs
Freescale Semiconductor Application Note Document Number: AN3811 Rev. 0, 4/2009 Using GCR4 to Adjust Ethernet Timing in MSC8144 DSPs This application note assists board designers to implement Ethernet
MSC8144 Device Reset Configuration For the MSC8144ADS Board
Freescale Semiconductor Application Note Document Number: AN3424 Rev. 0, 05/2007 MSC8144 Device Reset Configuration For the MSC8144ADS Board by Andrew Temple NCSG DSP Applications Freescale Semiconductor,
MBC13720 SiGe:C Low Noise Amplifier with Bypass Switch Device
Freescale Semiconductor Data Sheet: Technical Data Document Number: MBC13720 Rev. 4, 09/2011 MBC13720 MBC13720 SiGe:C Low Noise Amplifier with Bypass Switch Device MBC13720NT1 1 1 Refer to Table 1. Package
LFAE Bootloader Example and Interface for use with AN2546 Daniel McKenna MCD Applications, East Kilbride Scotland
Freescale Semiconductor Application Note Document Number: AN3391 Rev. 0, 01/2007 LFAE Bootloader Example and Interface for use with AN2546 by: Daniel McKenna MCD Applications, East Kilbride Scotland 1
Using the Asynchronous DMA features of the Kinetis L Series
Freescale Semiconductor Document Number:AN4631 Application Note Rev. 0, 12/2012 Using the Asynchronous DMA features of the Kinetis L Series by: Chris Brown 1 Introduction The power consumption of devices
Addendum to HPCN User s Guide: Quick-Start Guide
Freescale Semiconductor Document Number: HPCNUGAD Rev. 0.5, 1/2007 Addendum to HPCN User s Guide: Quick-Start Guide This quick-start guide explains how to prepare the High-Performance Computing Platform-Net
PowerQUICC HDLC Support and Example Code
Freescale Semiconductor Application Note Document Number: AN3966 Rev. 0, 11/2009 PowerQUICC HDLC Support and Example Code High-level data link control (HDLC) is a bit-oriented protocol that falls within
1 Introduction. 2 Problem statement. Freescale Semiconductor Engineering Bulletin. Document Number: EB727 Rev. 0, 01/2010
Freescale Semiconductor Engineering Bulletin Document Number: EB727 Rev. 0, 01/2010 Enabling and Disabling ECC on MC9S08DE60/MC9S08DE32 Microcontrollers by: Philip Drake, 8-Bit Systems and Applications
Using DMA to Emulate ADC Flexible Scan Mode on Kinetis K Series
Freescale Semiconductor Document Number: AN4590 Application Note Rev 0, 9/2012 Using DMA to Emulate ADC Flexible Scan Mode on Kinetis K Series by: Lukas Vaculik Rožnov pod Radhoštem Czech Republic 1 Introduction
56F Phase Switched Reluctance Motor Sensorless Control using Processor Expert Targeting Document
56F8300 3-Phase Switched Reluctance Motor Sensorless Control using Processor Expert Targeting Document MC56F8300 16-bit Digital Signal Controllers 8300SRMxxTD Rev. 0 2/2005 freescale.com Document Revision
SCI Driver for the MC9S08GW64
Freescale Semiconductor Application Note Document Number: AN4161 Rev. 0,8/2010 SCI Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group Noida India 1 Introduction This document
Interfacing MPC5500 Microcontrollers to the MFR4310 FlexRay Controller Robert Moran MCD Applications, East Kilbride, Scotland
Freescale Semiconductor Application Note Document Number: AN3269 Rev. 3, 02/2010 Interfacing MPC5500 Microcontrollers to the MFR4310 FlexRay Controller by: Robert Moran MCD Applications, East Kilbride,
I.MX Platform Advanced Toolkit Standard Version User s Guide
I.MX Platform Advanced Toolkit Standard Version User s Guide Rev. 1.4 01/2008 How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor
Mask Set Errata for Mask 2M40J
Mask Set Errata MSE9S08QE8_2M40J Rev. 3, 8/2010 Mask Set Errata for Mask 2M40J Introduction This report applies to mask 2M40J for these products: MC9S08QE8 MCU device mask set identification The mask set