MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnLE Series
|
|
|
- Jocelyn Harrison
- 5 years ago
- Views:
Transcription
1 Freescale Semiconductor Technical Data Document Number: MPC7410ECS08AD Rev. 1, 11/2010 MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnLE Series This document describes part-number-specific changes to the MPC7410 RISC Microprocessor Hardware Specifications (Document No. MPC7410EC). Specifications provided in this document supersede those in the MPC7410 RISC Microprocessor Hardware Specifications, Rev. 1 or later, for the part numbers listed in Table A only. Specifications not addressed herein are unchanged. Because this document is frequently updated, see the website listed on the back page of this document or contact your Freescale sales office for the latest version. Freescale Part Numbers Affected: MPC7410THX400LE MPC7410THX450LE MPC7410THX500LE MC7410TVU400LE 2010 Freescale Semiconductor, Inc. All rights reserved.
2 Table A. Part-Number-Specific Changes Operating Conditions Freescale Part Number CPU Frequency (MHz) V DD T J ( C) OV DD (V) Significant Changes from Hardware Specification MPC7410THX500LE V ±100 mv 40 to /2.5/3.3 Extended temperature range. For all DC/AC document, see the MPC7410RX500LE MPC7410THX450LE V ±100 mv 40 to /2.5/3.3 Extended temperature range. For all DC/AC document, see the MPC7410RX450LE MPC7410THX400LE V ±100 mv 40 to /2.5/3.3 Extended temperature range. For all DC/AC document, see the MPC7410RX400LE MC7410TVU400LE V ±100 mv 40 to /2.5/3.3 Extended temperature range. For all DC/AC document, see the MC7410VU400LE DC Electrical Characteristics The MPC7410TxxnnnLE series DC electrical characteristics are identical to that of the MPC7410, with the exception shown in Table B. Table B. Recommended Operating Conditions Characteristic Symbol Recommended Value Unit Die-junction temperature T j 40 to 105 C Note: See the MPC7410 RISC 2 Freescale Semiconductor
3 Part Numbers Addressed by this Specification Table C provides the ordering information for the MPC7410TxxnnnLE series. Table C. Part Marking Nomenclature MPC 7410 T xx nnn L E Product Code Part Identifier Process Descriptor Package Processor Frequency 1 Application Modifier Revision Level MPC 7410 T: 40 to 105 C HX = HCTE_CBGA L: 1.8 V ±100 mv E: 1.4; PVR = 800C 1104 MC VU = HCTE_CBGA (Lead Free C5 Solder Spheres) 400 Note: 1. Processor core frequencies supported by parts addressed by this specification only. Parts addressed by other specifications may support other maximum core frequencies. Part Marking Parts are marked as the example shown in Figure A. MPC7410 THXnnnLE MMMMMM ATWLYYWWA 7410 BGA Notes: nnn is the speed grade of the part. MMMMMM is the 6-digit mask number. ATWLYYWWA is the traceability code. CCCCC is the country of assembly. This space is left blank if parts are assembled in the United States. Figure A. Part Marking for BGA Device Freescale Semiconductor 3
4 Document Revision History Table D provides a revision history for this document. Table D. Document Revision History Revision Date Substantive Chagnes(s) 1 11/2010 Removed HX from document title. Added MC7410TVU400LE to list of devices covered by this document. Updated Table C, Part Marking Nomenclature, to include MC7410TVU400LE /2005 Document template update 0 10/2003 Initial release. Document ID change from MPC7410THXLEPNS for Part Number Specification to MPC7410ECS08AD for Hardware Specification Addendum. 4 Freescale Semiconductor
5 How to Reach Us: Home Page: Web Support: USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL East Elliot Road Tempe, Arizona or Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen Muenchen, Germany (English) (English) (German) (French) Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku Tokyo Japan or support.japan@freescale.com Asia/Pacific: Freescale Semiconductor China Ltd. Exchange Building 23F No. 118 Jianguo Road Chaoyang District Beijing China support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center or Fax: Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters which may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc. Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org Freescale Semiconductor, Inc. Document Number: MPC7410ECS08AD Rev. 1 11/2010
SGTL5000 I 2 S DSP Mode
Freescale Semiconductor Application Note Document Number: AN3664 Rev. 2, 11/2008 SGTL5000 I 2 S DSP Mode by Name of Group Freescale Semiconductor, Inc. Austin, TX 1 Description SGTL5000 supports multiple
Design Recommendations to Implement Compatibility Between the MC13783VK and the MC13783VK5
Freescale Semiconductor Application Note Document Number: AN3417 Rev. 0.1, 01/2010 Design Recommendations to Implement Compatibility Between the MC13783VK and the MC13783VK5 by: Power Management and Audio
MPC5200(b) ATA MDMA, UDMA Functionality BestComm Setup Recommendations
Freescale Semiconductor Engineering Bulletin Document Number: EB711 Rev. 0, 05/2009 MPC5200(b) ATA MDMA, UDMA Functionality BestComm Setup Recommendations by: Peter Kardos Application Engineer, Roznov
Updating the Firmware on USB SPI Boards (KITUSBSPIEVME, KITUSBSPIDGLEVME)
Freescale Semiconductor User s Guide Document Number: KTUSBSPIPRGUG Rev. 1.0, 7/2010 Updating the Firmware on USB SPI Boards (KITUSBSPIEVME, KITUSBSPIDGLEVME) Figure 1. KITUSBSPIEVME and KITUSBSPIDGLEVME
MC56F825x/MC56F824x (2M53V) Chip Errata
Freescale Semiconductor MC56F825XE_2M53V Chip Errata Rev. 1, 05/2012 MC56F825x/MC56F824x (2M53V) Chip Errata The following errata items apply to devices of the maskset 2M53V. 2012 Freescale Semiconductor,
Utilizing Extra FC Credits for PCI Express Inbound Posted Memory Write Transactions in PowerQUICC III Devices
Freescale Semiconductor Application Note Document Number: AN3781 Rev. 0, 06/2009 Utilizing Extra FC Credits for PCI Express Inbound Posted Memory Write Transactions in PowerQUICC III Devices This application
MTIM Driver for the MC9S08GW64
Freescale Semiconductor Application Note Document Number: AN4160 Rev. 0, 8/2010 MTIM Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group India IDC MSG NOIDA 1 Introduction
Upgrade the Solution With No Changes 2 Upgrade the Solution With No Changes If a Codebase does not contain updates to its properties, it is possible t
Freescale Semiconductor Application Note Document Number: AN3819 Rev. 0.0, 02/2009 Methods for Upgrading Freescale BeeStack Codebases 1 Introduction This note describes how to upgrade an existing Freescale
MPR121 Jitter and False Touch Detection
Freescale Semiconductor Application Note Rev 1, 03/2010 MPR121 Jitter and False Touch Detection INTRODUCTION Touch acquisition takes a few different parts of the system in order to detect touch. The baseline
PCB Layout Guidelines for the MC1321x
Freescale Semiconductor Application Note Document Number: AN3149 Rev. 0.0, 03/2006 PCB Layout Guidelines for the MC1321x 1 Introduction This application note describes Printed Circuit Board (PCB) footprint
MPC8349E-mITX-GP Board Errata
Freescale Semiconductor Document Number: MPC8349EMITX-GPBE Rev. 2, 01/2007 MPC8349E-mITX-GP Board Errata This document describes the known errata and limitations of the MPC8349E-mITX-GP reference platform.
PowerQUICC HDLC Support and Example Code
Freescale Semiconductor Application Note Document Number: AN3966 Rev. 0, 11/2009 PowerQUICC HDLC Support and Example Code High-level data link control (HDLC) is a bit-oriented protocol that falls within
MC33696MODxxx Kit. 1 Overview. Freescale Semiconductor Quick Start Guide. Document Number: MC33696MODUG Rev. 0, 05/2007
Freescale Semiconductor Quick Start Guide Document Number: MC33696MODUG Rev. 0, 05/2007 MC33696MODxxx Kit by: Laurent Gauthier Toulouse, France 1 Overview This document provides introductory information
Using the PowerQUICC II Auto-Load Feature
Freescale Semiconductor Application Note Document Number: AN3352 Rev. 0, 01/2007 Using the PowerQUICC II Auto-Load Feature by David Smith/Patrick Billings Field Application Engineering/DSD Applications
USB Bootloader GUI User s Guide
Freescale Semiconductor User s Guide Document Number: MC9S08JS16UG Rev. 0, 10/2008 USB Bootloader GUI User s Guide by: Derek Liu Applications Engineering China 1 Overview The MC9S08JS16 (JS16) supports
IIC Driver for the MC9S08GW64
Freescale Semiconductor Application Note Document Number: AN4158 Rev. 0, 8/2010 IIC Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group Noida India 1 Introduction This document
MPR121 Proximity Detection
Freescale Semiconductor Application Note Rev 0, 03/2010 MPR121 Proximity Detection INTRODUCTION MPR121 is a feature rich, second generation touch sensor controller after Freescale s initial release of
Managing Failure Detections and Using Required Components to Meet ISO7637 pulse 1 on MC33903/4/5 Common Mode Choke Implementation
Freescale Semiconductor Application Note AN3865 Rev. 1.0, 2/2010 Managing Failure Detections and Using Required Components to Meet ISO7637 pulse 1 on MC33903/4/5 Common Mode Choke Implementation 1 Overview
Differences Between the DSP56301, DSP56311, and DSP56321
Freescale Semiconductor Engineering Bulletin Document Number: EB724 Rev. 0, 11/2009 Differences Between the DSP56301, DSP56311, and DSP56321 This engineering bulletin discusses the differences between
Using the CAU and mmcau in ColdFire, ColdFire+ and Kinetis
Freescale Semiconductor Document Number: AN4307 Application Note Rev. Rev.0, 5/ 2011 Using the CAU and mmcau in ColdFire, ColdFire+ and Kinetis by: Paolo Alcantara RTAC Americas Mexico 1 Introduction This
Electrode Graphing Tool IIC Driver Errata Microcontroller Division
Freescale Semiconductor User Guide Addendum TSSEGTUGAD Rev. 1, 03/2010 Electrode Graphing Tool IIC Driver Errata by: Microcontroller Division This errata document describes corrections to the Electrode
Migrating from the MPC852T to the MPC875
Freescale Semiconductor Application Note Document Number: AN2584 Rev. 1, 1/2007 Migrating from the MPC852T to the MPC875 by Ned Reinhold NCSD Applications Freescale Semiconductor, Inc. Austin, TX This
MPC7455 RISC Microprocessor Hardware Specifications Addendum for the XPC74n5RXnnnNx Series
Freescale Semiconductor Advance Information Document Number: MPC7455ECS02AD Rev. 1.2, 10/2005 MPC7455 RISC Microprocessor Hardware Specifications Addendum for the XPC74n5RXnnnNx Series This document describes
PDB Driver for the MC9S08GW64
Freescale Semiconductor Application Note Document Number: AN4163 Rev. 0, 8/2010 PDB Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group Noida India 1 Introduction This document
Changing the i.mx51 NAND Flash Model for Windows Embedded CE TM 6.0
Freescale Semiconductor Application Note Document Number: AN3986 Rev. 0, 02/2010 Changing the i.mx51 NAND Flash Model for Windows Embedded CE TM 6.0 by Multimedia Applications Division Freescale Semiconductor,
16-bit MCU: S12XHY256 Automotive Cluster Demo by: Jose M. Cisneros Steven McLaughlin Applications Engineer Microcontroller Solutions Group, Scotland
Freescale Semiconductor Users Guide Document Number: S12XHY256ACDUG Rev. 0, 10/2010 16-bit MCU: S12XHY256 Automotive Cluster Demo by: Jose M. Cisneros Steven McLaughlin Applications Engineer Microcontroller
Use of PGA on MC56F800x Interaction of PDB, PGA and ADC
Freescale Semiconductor Document Number: AN4334 Application Note Rev. 0, 03/2012 Use of PGA on MC56F800x Interaction of PDB, PGA and ADC by: William Jiang System and Application, Microcontroller Solutions
Component Development Environment Installation Guide
Freescale Semiconductor Document Number: PEXCDEINSTALLUG Rev. 1, 03/2012 Component Development Environment Installation Guide 1. Introduction The Component Development Environment (CDE) is available as
MSC8144AMC-S Getting Started Guide
Freescale Semiconductor Hardware Getting Started Guide Document Number: MSC8144AMCSHWGSG Rev. 2, 07/2008 MSC8144AMC-S Getting Started Guide This document describes how to connect the MSC8144AMC-S card
MCF54451, MCF54452, MCF54453, MCF54454,
Chip Errata MCF54455DE Rev. 5, 8/21 MCF54455 Chip Errata Revision: All Supports: MCF5445, MCF54451, MCF54452, MCF54453, MCF54454, and MCF54455 Summary of MCF5445x Errata The latest mask of the MCF5445x
Using an I 2 C EEPROM During MSC8157 Initialization
Freescale Semiconductor Application Note AN4205 Rev. 0, 11/2010 Using an I 2 C EEPROM During MSC8157 Initialization The MSC8157 family allows you to use an I 2 C EEPROM to to initialize the DSP during
Mechanical Differences Between the 196-pin MAP-BGA and 196-pin PBGA Packages
Freescale Semiconductor Engineering Bulletin EB360 Rev. 1, 10/2005 Mechanical Differences Between the 196-pin MAP-BGA and 196-pin PBGA Packages This document describes the differences between the 196-pin
Introduction to the S12G Family EEPROM Including a Comparison between the S08DZ, S12XE, and S12P Families
Freescale Semiconductor Application Note Document Number: AN4302 Rev. 0, 04/2011 Introduction to the S12G Family EEPROM Including a Comparison between the S08DZ, S12XE, and S12P Families by: Victor Hugo
etpu Automotive Function Set (Set 2)
Freescale Semiconductor Application Note Document Number: AN3768 Rev. 0, 05/2009 etpu Automotive Function Set (Set 2) by: Geoff Emerson East Kilbride U.K. 1 Introduction This application note complements
Using the Project Board LCD Display at 3.3 volts
Freescale Semiconductor SLK0100AN Application Note Rev. 0, 1/2007 By: John McLellan Applications Engineering Austin, TX 1 Introduction This document guides you through the steps necessary to use the LCD
VortiQa Enterprise Quick Start Guide
Freescale Semiconductor Document Number: VQSEQSG Quick Start Guide Rev. 0, 06/2009 VortiQa Enterprise Quick Start Guide 1 Introduction This document describes how to set up and install the VortiQa software
i.mx31 PDK Power Measurement with GUI
Freescale Semiconductor Application Note Document Number: AN4061 Rev. 0, 02/2010 i.mx31 PDK Power Measurement with GUI by Multimedia Application Division Freescale Semiconductor, Inc. Austin, TX This application
Using the ColdFire+ Family Enhanced EEPROM Functionality Melissa Hunter Derrick Klotz
Freescale Semiconductor Application Note Document Number: AN4306 Rev. 0, 05/2011 Using the ColdFire+ Family Enhanced EEPROM Functionality by: Melissa Hunter Derrick Klotz 1 Introduction The ColdFire+ family
1 Introduction. 2 Problem statement. Freescale Semiconductor Engineering Bulletin. Document Number: EB727 Rev. 0, 01/2010
Freescale Semiconductor Engineering Bulletin Document Number: EB727 Rev. 0, 01/2010 Enabling and Disabling ECC on MC9S08DE60/MC9S08DE32 Microcontrollers by: Philip Drake, 8-Bit Systems and Applications
Using DMA to Emulate ADC Flexible Scan Mode on Kinetis K Series
Freescale Semiconductor Document Number: AN4590 Application Note Rev 0, 9/2012 Using DMA to Emulate ADC Flexible Scan Mode on Kinetis K Series by: Lukas Vaculik Rožnov pod Radhoštem Czech Republic 1 Introduction
Mask Set Errata for Mask 2M40J
Mask Set Errata MSE9S08QE8_2M40J Rev. 3, 8/2010 Mask Set Errata for Mask 2M40J Introduction This report applies to mask 2M40J for these products: MC9S08QE8 MCU device mask set identification The mask set
MPC8260 IDMA Timing Diagrams
Freescale Semiconductor Application Note Document Number: AN2177 Rev. 4, 07/2006 MPC8260 IDMA Timing Diagrams By DSD Applications, NCSG Freescale Semiconductor, Inc. The MPC8260 PowerQUICC II integrated
Interfacing MPC5500 Microcontrollers to the MFR4310 FlexRay Controller Robert Moran MCD Applications, East Kilbride, Scotland
Freescale Semiconductor Application Note Document Number: AN3269 Rev. 3, 02/2010 Interfacing MPC5500 Microcontrollers to the MFR4310 FlexRay Controller by: Robert Moran MCD Applications, East Kilbride,
ColdFire Convert 1.0 Users Manual by: Ernest Holloway
Freescale Semiconductor CFCONVERTUG Users Guide Rev.0, 09/2006 ColdFire Convert 1.0 Users Manual by: Ernest Holloway The ColdFire Convert 1.0 (CF) is a free engineering tool developed to generate data
Using the Kinetis Family Enhanced EEPROM Functionality
Freescale Semiconductor Application Note Document Number: AN4282 Rev. 1, 03/2015 Using the Kinetis Family Enhanced EEPROM Functionality by: Melissa Hunter Derrick Klotz 1 Introduction Some of the Kinetis
Pad Configuration and GPIO Driver for MPC5500 Martin Kaspar, EMEAGTM, Roznov Daniel McKenna, MSG Applications, East Kilbride
Freescale Semiconductor Application Note Document Number: AN2855 Rev. 0, 2/2008 Pad Configuration and GPIO Driver for MPC5500 by: Martin Kaspar, EMEAGTM, Roznov Daniel McKenna, MSG Applications, East Kilbride
Using GCR4 to Adjust Ethernet Timing in MSC8144 DSPs
Freescale Semiconductor Application Note Document Number: AN3811 Rev. 0, 4/2009 Using GCR4 to Adjust Ethernet Timing in MSC8144 DSPs This application note assists board designers to implement Ethernet
EchoRemote Evaluation Software for Windows
Freescale Semiconductor Application Note Document Number: AN2953 Rev.1, 05/2007 EchoRemote Evaluation Software for Windows 1 Overview EchoRemote is a Microsoft Windows program that communicates with the
etpu General Function Set (Set 1) David Paterson MCD Applications Engineer
Freescale Semiconductor Application Note Document Number: AN2863 Rev. 0, 12/2007 etpu General Function Set (Set 1) by David Paterson MCD Applications Engineer 1 Introduction This application note complements
Using the Asynchronous DMA features of the Kinetis L Series
Freescale Semiconductor Document Number:AN4631 Application Note Rev. 0, 12/2012 Using the Asynchronous DMA features of the Kinetis L Series by: Chris Brown 1 Introduction The power consumption of devices
Optically-Isolated Multilink BDM Interface for the S08/S12 Microcontrollers by Michael A. Steffen
Freescale Semiconductor Application Note AN3589 Rev. 0, 02/2008 Optically-Isolated Multilink BDM Interface for the S08/S12 Microcontrollers by Michael A. Steffen 1 Introduction This application note explains
Converting Earlier Versions of CodeWarrior for StarCore DSPs Projects to Version
Freescale Semiconductor Document Number: AN4253 Application Note Rev. 1, 01/2011 Converting Earlier Versions of CodeWarrior for StarCore DSPs Projects to Version 10.1.8 by DevTech Customer Engineering
HC912D60A / HC912Dx128A 0.5µ Microcontrollers Mask sets 2K38K, 1L02H/2L02H/3L02H & K91D, 0L05H/1L05H/2L05H
Freescale Semiconductor Engineering Bulletin EB664 Rev. 6, 08/2006 HC912D60A / HC912Dx128A 0.5µ Microcontrollers Mask sets 2K38K, 1L02H/2L02H/3L02H & K91D, 0L05H/1L05H/2L05H by: Devaganesan Rajoo HC12
Power Cycling Algorithm using the MMA73x0L 3-Axis Linear Accelerometer
Freescale Semiconductor Application Note Rev 1, 06/2007 Power Cycling Algorithm using the MMA73x0L 3-Axis Linear Accelerometer by: Kimberly Tuck Accelerometer Systems and Applications Engineering Tempe,
Using the Multi-Axis g-select Evaluation Boards
Freescale Semiconductor Application Note Rev 2, 10/2006 Using the Multi-Axis g-select Evaluation Boards by: Michelle Clifford and John Young Applications Engineers Tempe, AZ INTRODUCTION This application
Errata to the MPC8280 PowerQUICC II Family Reference Manual, Rev. 1
Freescale Semiconductor Addendum Document Number: MPC8280RMAD Rev. 1.5, 12/2010 Errata to the MPC8280 PowerQUICC II Family Reference Manual, Rev. 1 This errata document describes corrections to the MPC8280
Keil uvision 4 Kinetis Support for Freescale MQX RTOS Release Notes
Keil uvision 4 Kinetis Support for Freescale MQX RTOS 3.7.0 Release Notes PRODUCT: Keil uvision 4 Kinetis Support for Freescale MQX RTOS 3.7.0 PRODUCT VERSION: 1.0 DESCRIPTION: Adding support for Keil
MPC8569E Instruction RAM Microcode Package Release 169
Freescale Semiconductor Release Note MPC8569EIRAMPKGRN_169 Dec 1, 2009 Rev. 0 MPC8569E Instruction RAM Microcode Package Release 169 General This release note reflects differences between the QUICC Engine
Errata to MPC8569E PowerQUICC III Integrated Processor Reference Manual, Rev. 2
Freescale Semiconductor Addendum Document Number: MPC8569ERMAD Rev. 2.1, 12/2011 Errata to MPC8569E PowerQUICC III Integrated Processor Reference Manual, Rev. 2 This errata describes corrections to the
56F8300 BLDC Motor Control Application
56F8300 BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document 56F8300 16-bit Digital Signal Controllers 8300BLDCQETD Rev. 2 08/2005 freescale.com Document
Mask Set Errata for Mask 5L35K
Freescale Semiconductor MSE908GR16_5L35K Mask Set Errata Rev. 2, 12/2010 Mask Set Errata for Mask 5L35K Introduction This report applies to mask 5L35K for these products: MC68HC908GR16 The mask set is
SCI Driver for the MC9S08GW64
Freescale Semiconductor Application Note Document Number: AN4161 Rev. 0,8/2010 SCI Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group Noida India 1 Introduction This document
Support for IEEE 1588 Protocol in PowerQUICC and QorIQ Processors
Freescale Semiconductor Application Note Document Number: AN3423 Rev. 0, 09/2010 Support for IEEE 1588 Protocol in PowerQUICC and QorIQ Processors by Networking and Multimedia Group Freescale Semiconductor,
PowerQUICC II Parity and ECC Capability
Freescale Semiconductor Application Note Document Number: AN2682 Rev. 1, 01/2007 PowerQUICC II Parity and ECC Capability by DSD Applications, Freescale Semiconductor, Inc. Austin, TX Ensuring the integrity
MC33897 Single-Wire CAN Transceiver Reliability and Quality Documents
Freescale Semiconductor Reliability & Qualifications RQA33897 Rev. 2.0, 8/2006 MC33897 Single-Wire CAN Transceiver Reliability and Quality Documents The device(s) in this document successfully completed
Interrupts in Decoupled Parallel Mode for MPC5675K Configuration and Usage
Freescale Semiconductor Document Number: AN4495 Application Note Rev. 0, 3/2012 Interrupts in Decoupled Parallel Mode for MPC5675K Configuration and Usage by: Tomas Kulig Automotive and Industrial Solutions
56F805. BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document. 56F bit Digital Signal Controllers
56F805 BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document 56F800 6-bit Digital Signal Controllers 805BLDCQETD Rev. 08/2005 freescale.com BLDC Motor Control
Using the Knock Window etpu Function
Freescale Semiconductor Application Note Document Number: AN3772 Rev. 0, 05/2009 Using the Knock Window etpu Function by: David Paterson 1 Introduction This application note provides simple C interface
Interfacing and Configuring the i.mx25 Flash Devices
Freescale Semiconductor Application Note Document Number: AN4016 Rev. 0, 03/2010 Interfacing and Configuring the i.mx25 Flash Devices by Multimedia Applications Division Freescale Semiconductor, Inc. Austin,
MCF5445x Configuration and Boot Options Michael Norman Microcontroller Division
Freescale Semiconductor Application Note Document Number: AN3515 Rev. 1, 04/2008 MCF5445x Configuration and Boot Options by: Michael Norman Microcontroller Division 1 Configuration Modes The Freescale
ORDERING INFORMATION. Device Marking MPXC2011DTI Tape and Reel 423A Date Code, Lot ID MPXC2012DTI Tape and Reel 423A Date Code, Lot ID
Freescale Semiconductor High Volume Sensor for Low Pressure Applications Freescale Semiconductor has developed a low cost, high volume, miniature pressure sensor package which is ideal as a sub-module
MC9S08DZ60 Migrating from the 3M05C to M74K Mask Set D. Scott Brown Applications Engineering Microcontrollers Solutions Group Austin, TX, USA
Freescale Semiconductor Application Note Document Number: AN3776 Rev. 0, 09/2008 MC9S08DZ60 Migrating from the 3M05C to M74K Mask Set by: D. Scott Brown Applications Engineering Microcontrollers Solutions
Functional Differences Between the DSP56307 and DSP56L307
Freescale Semiconductor Engineering Bulletin EB361 Rev. 3, 10/2005 Functional Differences Between the DSP56307 and DSP56L307 The DSP56307 and DSP56L307, two members of the Freescale DSP56300 family of
Using IIC to Read ADC Values on MC9S08QG8
Freescale Semiconductor Application Note AN3048 Rev. 1.00, 11/2005 Using IIC to Read ADC Values on MC9S08QG8 by Donnie Garcia Application Engineering Microcontroller Division 1 Introduction The MC9S08QG8
Sensorless BLDC Motor Control Based on MC9S08PT60 Tower Board User Guide
Freescale Semiconductor Document Number:S08PT60UG User Guide Rev. 0, 02/2013 Sensorless BLDC Motor Control Based on MC9S08PT60 Tower Board User Guide 1 Overview This user guide describes the basic steps
Media Streaming to i.mx31 PDK over Wireless LAN
Freescale Semiconductor Application Note Document Number: AN4174 Rev. 0, 07/2010 Media Streaming to i.mx31 PDK over Wireless LAN by Multimedia Applications Division Freescale Semiconductor, Inc. Austin,
Interfacing MPC5xx Microcontrollers to the MFR4310 FlexRay Controller David Paterson MCD Applications, East Kilbride
Freescale Semiconductor Application Note Document Number: AN3256 Rev. 2, 2/2008 Interfacing MPC5xx Microcontrollers to the MFR4310 FlexRay Controller by: David Paterson MCD Applications, East Kilbride
i.mx51 WinCE Clock Setting
Freescale Semiconductor Application Note Document Number: AN4140 Rev. 0, 06/2010 i.mx51 WinCE Setting by Multimedia Applications Division Freescale Semiconductor, Inc. Austin, TX 1 Introduction This application
Freescale Semiconductor. Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated MP3V5050.
Freescale Semiconductor Integrated Silicon Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated The series piezoresistive transducer is a state-of-the-art monolithic silicon pressure
Gallium Arsenide PHEMT RF Power Field Effect Transistor
Technical Data Available at http://www.freescale.com/rf, Go to Tools Rev., 6/2005 Reference Design Library Gallium Arsenide PHEMT Power Field Effect Transistor Device Characteristics (From Device Data
Freescale Semiconductor. Integrated Silicon Pressure Sensor, On-Chip Signal Conditioned, Temperature Compensated and Calibrated MP3V5004G.
Freescale Semiconductor Integrated Silicon Pressure Sensor, On-Chip Signal Conditioned, Temperature Compensated and Calibrated The series piezoresistive transducer is a state-of-the-art monolithic silicon
MC33794 Touch Panel System Using E-Field Sensor Setup Instructions
Freescale Semiconductor MC33794SIUG User s Guide Rev. 1.0, 09/2005 MC33794 Touch Panel System Using E-Field Sensor Setup Instructions Reference Design Documentation for RDMC33794 This document contains
i.mx31 PDK 1.3 to PDK 1.4 Revision Changes Linux
Freescale Semiconductor Document Number: 926-77774 Application Note Rev. 1.2, 10/2008 i.mx31 PDK 1.3 to PDK 1.4 Revision Changes Linux This document explains the application changes for the Linux i.mx31
Addendum to HPCN User s Guide: Quick-Start Guide
Freescale Semiconductor Document Number: HPCNUGAD Rev. 0.5, 1/2007 Addendum to HPCN User s Guide: Quick-Start Guide This quick-start guide explains how to prepare the High-Performance Computing Platform-Net
56F805. Digital Power Factor Correction using Processor Expert TM Targeting Document. 56F bit Digital Signal Controllers. freescale.
56F805 Digital Power Factor Correction using Processor Expert TM Targeting Document 56F800 6-bit Digital Signal Controllers 805DPFCTD Rev. 0 08/2005 freescale.com Digital Power Factor Correction This
TLB Translation Setup for MPC745x and MPC744x in Non-Extended Mode
Freescale Semiconductor Application Note AN2796 Rev. 1, 5/2006 TLB Translation Setup for MPC745x and MPC744x in Non-Extended Mode by Amanuel Belay Computing Platform Division Freescale Semiconductor, Inc.
Symphony SoundBite: Quick Start with Symphony Studio. Installation and Configuration
Symphony SoundBite: Quick Start with Symphony Studio Installation and Configuration Document Number: DSPB56371UGQS Rev. 2 September 2008 How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com
ADC Driver for MC9S08GW64
Freescale Semiconductor Application Note Document Number: AN4169 Rev. 2, 2010 ADC Driver for MC9S08GW64 by: Tanya Malik Microcontroller Solutions Group Noida India 1 Introduction ADC converts an input
Writing Touch Sensing Software Using TSI Module
Freescale Semiconductor Document Number: AN4330 Application Note Rev. 0, July 2011 Writing Touch Sensing Software Using TSI Module by: Daniel Martínez Microcontroller Solutions Group Guadalajara 1 Before
Clock Mode Selection for MSC8122 Mask Set K98M
Freescale Semiconductor Application Note AN2904 Rev. 0, 11/2004 Clock Mode Selection for MSC8122 Mask Set K98M By Donald Simon and Wes Ray This application note describes the MSC8122 clock modes for mask
Mask Set Errata for Mask REV3.1_2N89D
Freescale Semiconductor MPC5643L_REV3.1_2N89D Mask Set Errata Rev. 29 MAR 2012 Mask Set Errata for Mask REV3.1_2N89D Introduction This report applies to mask REV3.1_2N89D for these products: MPC5643L Errata
MPR083 Proximity Evaluation Kit User s Guide
Freescale Semiconductor User s Guide Rev 2, 04/2008 MPR083 Proximity Evaluation Kit User s Guide by: Laura Salhuana Introduction This guide will aid you in connecting the MPR083 Evaluation Kit Board to
Multichannel Communication Controller HDLC Superchannel Mode on the MPC8560
Freescale Semiconductor Application Note Document Number: AN3541 Rev. 0, 1/2008 Multichannel Communication Controller HDLC Superchannel Mode on the MPC8560 by Michael Johnston Networking and Multimedia
MC9S08DZ60 Flash Usage Considerations Andy McKechan Applications Engineer East Kilbride
Freescale Semiconductor Engineering Bulletin Document Number: EB695 Rev. 0, 07/2008 MC9S08DZ60 Flash Usage Considerations by: Andy McKechan Applications Engineer East Kilbride 1 Introduction Freescale
Asymmetric C++ Multicore Application for StarCore DSPs
Freescale Semiconductor Document Number: AN4220 Application Note Rev. 0, 01/2011 Asymmetric C++ Multicore Application for StarCore DSPs by Devtech Customer Engineering Freescale Semiconductor, Inc. Austin,
PMSM Vector Control with Encoder on Kinetis Setup Guide for Demo Kits without a Tablet PC
Freescale Semiconductor User s Guide Document Number: PMSMCONUG Rev. 0, 10/2011 PMSM Vector Control with Encoder on Kinetis Setup Guide for Demo Kits without a Tablet PC by: Matus Plachy System Application
Freescale BeeStack Documentation Overview Document Number: BSDO Rev /2008
Freescale BeeStack Documentation Overview Document Number: BSDO Rev. 1.0 04/2008 How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale
Functional Differences Between DSP56302 and DSP56309 (formerly DSP56302A)
Freescale Semiconductor Engineering Bulletin EB346 Rev. 3, 10/2005 Functional Differences Between DSP56302 and DSP56309 (formerly DSP56302A) To meet the increasing demands for higher performance and lower
Mask Set Errata for Mask 2N40C
Freescale Semiconductor S08PT60_2N40C Mask Set Errata Rev. 30 26 MAR 2012 Mask Set Errata for Mask 2N40C Introduction This report applies to mask 2N40C for these products: S08PT60 Errata ID 4044 BDC: a
NetComm Software Errata
NetComm Software Errata Release GA 4.7 Document ID: NCSWErrata Check out our web page for all NetComm Software related updates, at: http://www.freescale.com/netcommsw Freescale Semiconductor, Inc., 2013.