SHELVING 45 AND TYRE RACKS

Size: px

Start display at page:

Download "SHELVING 45 AND TYRE RACKS"

Antony Haynes
5 years ago
Views:

1 AND TYRE RACKS

2 AND TYRE RACKS Particularly suitable for the storage of heavy and bulky materials (cannot be used as a pallet rack). Made entirely of certified first grade steel sheet and profiled with completely automated machines and equipment. All components are cold-profiled with galvanized steel according to the Sendzimir process except for the safety offsets and hooks (protected with zinc electroplating). The design and construction have been carried out according to UNI standards and have passed the tests at the highest level. The reference standards of the theoretical calculation are: C.N.R /97 - C.N.R.10022/84 - D. Lgs. 81/08. The reference standards for materials are: UNI EN UNI EN SIDE CAPACITY VARIATIONS The table below shows the capacity of the sides according to the distance from the ground to the top edge of the first shelf or highest spacing if greater than the 1st shelf. The indicated capacities are for shelves with a minimum of 3 consecutive spans and 2 equidistant levels with the same evenly distributed load. If the number of spans is less than 3 floor fixing is obligatory to the floor and to fix the shelves with 4 bolts TE 5 x 20 with nuts and washers item S4270 (page 201). DISTANCE BETWEEN SHELVES SIDES 45 Capacity (kg) IMPORTANT (please read carefully before placing an order) Floors and ceilings Must be in good condition, without holes and accentuated unevenness and must have an appropriate consistency for the capacity of the shelves. In the case of installation to be carried out on a mezzanine floor or asphalted square it is essential to consult a specialist in order to assess the sealing and the capacity of the floor. Composition of spans For each span it is necessary to use at least 2 shelves in height with minimum 3 spans. It is also necessary to provide for the secure fastenening of the shelves (ex. with wall constraints or with links to the top) for a better stabilization of the structure. Safety It is essential to fix the sides to the floor with the number of anchors indicated on pages 200 and 202. The safety hooks must always be inserted into the battens. Elements that have been damaged must be replaced immediately. In declared seismic zones any kind of wall mounting is forbidden. The structures are intended for loading operations carried out manually, not with forklifts or pallet trucks. Capacities For each row of shelves, a plaque indicating the maximum capacity of the sides and the shelves must be placed in a visible position. The capacities indicated are always for uniformly distributed loads on the installation, installed according to our instructions and used correctly. Avoid loading the structures to the limits of their capacities. 197

3 198

4 199

5 For different measurements and capacities please consult with our sales office. BEFORE MAKING THE ORDER, PLEASE READ CAREFULLY page UPRIGHT SECTION SIDES 45 assembled, consisting of: 2 uprights gauge 15/10 2 metal bases with screws cross bars and diagonals fitted with screws pitch: 50mm. nominal capacity: 4600 Kg. actual capacity: (see table page 197) CROSS BARS DIAGONALS ANCHORS S x S x S x S x S x S x S x S x S x S x S x S x S x S x S x S x S x S x S x S x SPACER of angle section 54 x 26mm. gauge 30/10, for double-sided shelves, supplied with 2 bolts TE 6 x 20 with nuts and washers SPACE BETWEEN UPRIGHTS S It takes 2 for each link S4250 OVERALL SHELF To get the overall dimensions of the shelf you must: 1) Add the nominal length of the battens increased by 55mm. each span. 2) Add 90mm. to the total obtained to get the final dimensions including bases. Example: a shelf consisting of 3 nominal spans of 1800mm. will have a total length of 5655 mm. ( ) + ( ) + ( ) + 90 = 5655 mm. 200

6 For different measurements and capacities please contact our sales office S4255 BRACKET FOR WALL MOUNTING in profile 135 x 50mm. gauge 30/10, consisting of 2 elements with bores ø 13mm. supplied with 4 bolts TE 6 x 20 with nuts and washers, anchors not included COMPLETE SHELVES with shelves gauge 6/10 and 2 battens 65mm. h. gauge 15/10 with formed brackets, supplied with 4 safety hooks, minimum height 1st level 130mm. from the ground SHELVES 100 SHELVES 200 CAPACITY (*) (kg) S x S x S x S x S x S x S x S x S x S x S x S x S x S x S x S x S x S x S x S x S x S x S x S x S4255 from 65 to 105 S4260 S6953 REPLACEMENT ACCESSORIES S4265 S7405 DESCRIPTION S4260 ø 5 additional galvanized safety hook S x 90 x 30 S4270 additional sideboard for upright supplied with 1 bolt TE 8 x 20 with nut and washer bolts TE x 20 with nuts and washers S x 230 h plate for shelves S7405 ø 11 x 75 S4270 additional anchor for securing the sides to the floor (screws M10) Labels and magnetic rolls see page 217. (*) The indicated capacities are for evenly distributed loads. 201

7 - TYRE RACKS - TYRE RACKS NEW RELEASE For different measurements and capacities please consult with our sales office. BEFORE MAKING THE ORDER, PLEASE READ CAREFULLY page 197 SIDES 45 assembled, consisting of: 2 uprights gauge 15/10 2 metal bases with screws cross bars and diagonals, supplied with screws pitch: 50mm. nominal capacity: 4600 Kg. actual capacity: (see table page 197) UPRIGHT SECTION example: a shelf with depth of 500mm. is recommended for tyres ø from 650mm. to 800mm CROSS BARS DIAGONALS ANCHORS S x S x S x S4306 * 3700 x S4308 * 4200 x OVERALL SHELF To get the overall dimensions of the shelf you must: 1) Add the nominal length of the battens increased by 55mm. each span. 2) Add 90mm. to the total obtained to get the final dimensions including bases. Example: a shelf consisting of 3 nominal spans of 1800mm. will have a total length of 5655 mm. ( ) + ( ) + ( ) + 90 = 5655 mm. 67 * The heights 3700mm. and 4200mm. must be anchored to the wall, connected at the top or bifaced. 202

8 - TYRE RACKS For different measurements and capacities please consult with our sales office. - TYRE RACKS NEW RELEASE BATTEN PAIR TYRE RACKS gauge 15/10 with formed brackets, supplied with 4 bolts TE 5 x 20 with nuts, washers and 1 central longitudinal cross-piece LxDxH CAPACITY PER PAIR (*) (kg) S x 500 x S x 500 x S x 500 x S x 500 x COMPLETE SHELVES with shelves gauge 6/10 and 2 battens 65 mm. h. gauge 15/10 with formed brackets, supplied with 4 bolts TE 5 x 20 with nuts and washers SHELVES 100 SHELVES 200 CAPACITY (*) (kg) S x S x S x S x S4250 SPACER of angle section 54 x 26mm. x gauge 30/10, for double-sided shelves., supplied with 2 bolts TE 6 x 20 with nuts and washers. SPACE BETWEEN UPRIGHTS S It takes 2 for each link BRACKET FOR WALL MOUNTING in profile 135 x 50 gauge 30/10, consisting of 2 elements with bores ø 13 mm. supplied with 4 bolts TE 6 x 20 with nuts and washers, anchors not included. S4255 from 65 to 105 S4255 PLATE Labels and magnetic rolls see page 217. DESCRIPTION S x 230 h plate for shelves (*) The indicated capacities are for evenly distributed loads. 203

GALVANIZED-COATED SHELFING SYSTEM SHELVING FOR FOOD

GALVANIZED-COATED SHELFING SYSTEM SHELVING FOR FOOD ALVANIZED-COATED SHELFIN SYSTEM SHELVIN FOR FOOD ALVANIZED COATED SHELVIN ALVANIZEDRAL 7035 Entirely made of first grade steel and cold-profiled with galvanized steel according to the Sendzimir process