|
|
- Evangeline Austin
- 5 years ago
- Views:
Transcription
1
2
3
4
5
6
7
8 Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased durability easy and quick installation reasonable cost minimum delivery time At the same time, the correct design and selection of the cable tray system is critical for the optimum performance of the system, both in technical and economical terms. For that reason, this catalogue is also a guide to the best selection and use of cable support products. This way, each project s specifications will be fully met with a system of minimum purchase, installation and maintenance costs. The first few pages provide some basic technical instructions for the correct selection of: corrosion resistance cable tray support type dimensions of supports and cable trays material thickness and distance between supports By following the instructions and the detailed product description of each product, engineers can easily select the correct item for each application. GUARANTEE METALLODOMI S.A. covers with limited guarantee of twe (2) years from the day of purchase for all the products manufactured Hot Dip Galvanized According to DIN EN ISO George Koundourakis General Manager Page 3
9 TECHNICAL INSTRUCTIONS Corrosion Resistance Selection Our products are classified according to their corrosion resistance level as follows: 1. Products made of pre-galvanized sheet metal. Method: The sheet metal is dipped in zinc bath at 450 ο C according to the EN ISO standard. The resulting zinc layer has an average thickness of 20μm. The next step is punching and bending of the metal sheet. The surfaces resulting from cutting and punching are also protected against corrosion (up to 2mm of sheet thickness) due to the formation of zinc oxide. Use: Dry-air, indoor applications. 2. Products made of mild steel sheet and then hot-dip galvanized. Method: The mild steel sheet is punched and formed. The next step is hot-dip galvanizing according to the EN ISO 1461 standard. The resulting zinc thickness is about 60 μm. Use: Indoor applications with high moisture or outdoor applications. 3. Products made of stainless steel. Method: Stainless steel sheet is punched and formed. Use: Special applications, food or chemical industries and seaside installlations. Additional types of corrosion resistance can also be applied and offered: Products made of raw steel sheet, electro-galvanized Products made of mild steel sheet, hot-dip galvanized and epoxy powder coated. 4. Life span The life span of a zinc-coated material cannot be accurately predicted. However, it can be roughly estimated according to environmental conditions: The basic criterion for selecting the suitable cable support system is the type and cross-section of the cables. For example, large cross-section cables which are energy carriers release significant quantities of heat, therefore they need to be routed using cable ladders in order to enable the air flow around the cables. Telephone, network, signal cables or even low power cables can be routed through cable trays. Page 4
10 TECHNICAL INSTRUCTIONS Selection of Cable Support System Selection of dimensions When the cross section and the number of cables to be routed are known, the suitable cable tray cross section can be estimated. The suggested selection process is the following: 5. The sum of cable cross sections is calculated. 6. The result is multiplied by a factor of 1.3 to take into account the random placement of the cables into the cable tray. 7. The new result is multiplied again with a minimum factor of 1.3 to consider some extra free space in the cable tray for possible additional cables to be routed through the cable tray in the future. 8. The cable tray cross section (width x height) that will be selected must be equal to or greater than the result of the above mentioned calculations. In order to facilitate calculations, the following table contains the dimensions of the most commonly used cables. It must be noted however that the values in the table are approximate. The respective tables of the cable manufacturer should be used for better results. Page 5
11 TECHNICAL INSTRUCTIONS Diameters and Cross Sections of commonly used Cables Multi-thread Power Cables Single-thread Power Cables Page 6 Type Diameter Cross section (cm 2 ) 1 x 4 6,5 0,33 1 x 6 7 0,38 1 x ,50 1 x 16 9,5 0,71 1 x 25 12,5 1,23 3 x 1,5 8,5 0,57 3 x 2,5 9,5 0,71 3 x ,95 4 x 1,5 9 0,64 4 x 2,5 10,5 0,87 4 x 4 12,5 1,23 4 x 6 13,5 1,43 4 x 10 16,5 2,14 4 x ,84 4 x 25 23,5 4,34 4 x ,31 5 x 1,5 9,5 0,71 5 x 2,5 11 0,95 5 x 4 13,5 1,43 5 x 6 14,5 1,65 5 x ,54 5 x 16 21,5 3,63 5 x ,31 7 x 1,5 10,5 0,87 7 x 2,5 13 1,33 Signal Cables Type Diameter Cross section (cm 2 ) 2 x 2 x 0,6 5 0,20 4 x 2 x 0,6 5,5 0,24 6 x 2 x 0,6 6,5 0,33 10 x 2 x 0,6 7,5 0,44 20 x 2 x 0,6 9 0,64 40 x 2 x 6,6 11 0,95 60 x 2 x 0,6 13 1, x 2 x 0,6 17 2, x 2 x 0,6 23 4,15 2 x 2 x 0,8 6 0,28 4 x 2 x 0,8 7 0,38 6 x 2 x 0,8 8,5 0,57 10 x 2 x 0,8 9,5 0,71 20 x 2 x 0,8 13 1,33 40 x 2 x 0,8 16,5 2,14 60 x 2 x 0,8 20 3, x 2 x 0,8 25,5 5, x 2 x 0,8 32 8,04 Type Diameter Cross section (cm 2 ) 1 x ,87 1 x 16 11,5 1,04 1 x 25 12,5 1,23 1 x 35 13,5 1,43 1 x 50 15,5 1,89 1 x 70 16,5 2,14 1 x 95 18,5 2,69 1 x ,5 3,30 1 x ,5 3,98 1 x ,91 1 x ,16 1 x ,07 3 x 1,5 11,5 1,04 3 x 2,5 12,5 1,23 3 x 10 17,5 2,41 3 x 16 19,5 2,99 3 x ,31 3 x ,07 3 x ,18 4 x 1,5 12,5 1,23 4 x 2,5 13,5 1,43 4 x 6 16,5 2,14 4 x 10 18,5 2,69 4 x 16 21,5 3,63 4 x 25 25,5 5,11 4 x ,16 4 x ,07 4 x ,08 4 x ,95 4 x ,85 4 x ,35 4 x ,24 4 x ,42 5 x 1,5 13,5 1,43 5 x 2,5 14,5 1,65 5 x 6 18,5 2,69 5 x 10 20,5 3,30 5 x 16 22,5 3,98 5 x 25 27,5 5,94 5 x ,08 5 x ,57
12 Cable Weight Tables TECHNICAL INSTRUCTIONS Multi-thread Power Cables Type Type Signal Cables Weight (kg/m) 1 x 4 0,08 1 x 6 0,105 1 x 10 0,155 1 x 16 0,23 1 x 25 0,33 3 x 1,5 0,135 3 x 2,5 0,19 3 x 4 0,265 4 x 1,5 0,16 4 x 2,5 0,23 4 x 4 0,33 4 x 6 0,46 4 x 10 0,69 4 x 25 1,64 4 x 35 2,09 5 x 1 0,19 5 x 2,5 0,27 5 x 4 0,41 5 x 6 0,54 5 x 10 0,85 5 x 16 1,35 5 x 25 1,99 7 x 1,5 0,235 7 x 2,5 0,35 Weight (kg/m) 2 x 2 x 0,6 0,03 4 x 2 x 0,6 0,035 6 x 2 x 0,6 0,05 10 x 2 x 0,6 0, x 2 x 0,6 0,11 40 x 2 x 0,6 0,2 60 x 2 x 0,6 0, x 2 x 0,6 0, x 2 x 0,6 0,87 2 x 2 x 0,8 0,04 4 x 2 x 0,8 0,055 6 x 2 x 0,8 0,08 10 x 2 x 0,8 0, x 2 x 0,8 0, x 2 x 0,8 0,38 60 x 2 x 0,8 0, x 2 x 0,8 0, x 2 x 0,8 1,79 Cable weight calculation In order to proceed with the selection of cable support system, the total cable weight per meter length must be calculated first. For this calculation, cable weights can be found in tables provided by cable manufacturers. Such a table is provided below. Single-thread Power Cables Type Weight (kg/m) 1 x 10 0,18 1 x 16 0,24 1 x 25 0,35 1 x 35 0,46 1 x 50 0,6 1 x 70 0,8 1 x 95 1,1 1 x 120 1,35 1 x 150 1,65 1 x 300 3,2 3 x 1,5 0,19 3 x 2,5 0,24 3 x 10 0,58 3 x 16 0,81 3 x 50 1,8 3 x 70 2,4 3 x x 1,5 0,22 4 x 2,5 0,29 4 x 6 0,4 4 x 16 1,05 4 x 25 1,6 4 x 35 1,75 4 x 50 2,3 4 x 70 3,1 4 x 95 4,2 4 x 120 5,2 4 x 150 6,4 4 x 185 8,05 4 x x 1,5 0,27 5 x 2,5 0,35 5 x 6 0,61 5 x 10 0,88 5 x 16 1,25 5 x 25 1,95 5 x 50 3,5 Page 7
13 TECHNICAL INSTRUCTIONS SELECTION OF METAL SHEET THICKNESS & DISTANCE BETWEEN SUPPORTS According to the total cable weight per meter that has been calculated, the metal sheet thickness and the distance between supports can be selected. In this catalogue, a chart is provided for every cable tray type that gives the maximum allowed load per unit length for any combination of sheet metal thickness and distance between supports. By using the charts, the selected cable support system will be both robust and cost effective. Selection of support type The two basic criteria for selecting the support type are: The mounting surface (floor, wall, or ceiling) The load to be supported Our products cover all combinations of mounting surface and load to be supported. MATERIAL THICKNESS t=0,75mm Page 8
14 TECHNICAL INSTRUCTIONS SELECTION OF METAL SHEET THICKNESS & DISTANCE BETWEEN SUPPORTS According to the total cable weight per meter that has been calculated, the metal sheet thickness and the distance between supports can be selected. In this catalogue, a chart is provided for every cable tray type that gives the maximum allowed load per unit length for any combination of sheet metal thickness and distance between supports. By using the charts, the selected cable support system will be both robust and cost effective. Selection of support type The two basic criteria for selecting the support type are: The mounting surface (floor, wall, or ceiling) The load to be supported Our products cover all combinations of mounting surface and load to be supported. MATERIAL THICKNESS t=1,00mm Page 9
15 TECHNICAL INSTRUCTIONS SELECTION OF METAL SHEET THICKNESS & DISTANCE BETWEEN SUPPORTS According to the total cable weight per meter that has been calculated, the metal sheet thickness and the distance between supports can be selected. In this catalogue, a chart is provided for every cable tray type that gives the maximum allowed load per unit length for any combination of sheet metal thickness and distance between supports. By using the charts, the selected cable support system will be both robust and cost effective. Selection of support type The two basic criteria for selecting the support type are: The mounting surface (floor, wall, or ceiling) The load to be supported Our products cover all combinations of mounting surface and load to be supported. MATERIAL THICKNESS t=1,25mm Page 10
16 TECHNICAL INSTRUCTIONS SELECTION OF METAL SHEET THICKNESS & DISTANCE BETWEEN SUPPORTS According to the total cable weight per meter that has been calculated, the metal sheet thickness and the distance between supports can be selected. In this catalogue, a chart is provided for every cable tray type that gives the maximum allowed load per unit length for any combination of sheet metal thickness and distance between supports. By using the charts, the selected cable support system will be both robust and cost effective. Selection of support type The two basic criteria for selecting the support type are: The mounting surface (floor, wall, or ceiling) The load to be supported Our products cover all combinations of mounting surface and load to be supported. MATERIAL THICKNESS t=1,50mm Page 11
17 P RODUC TS C ATALOGUE Metallodomi products are manufactured as follows: CHAPTER 1 Cable Trays Series 35 Light duty Heavy duty Series 60 Light duty Heavy duty Series 85 Light duty Heavy duty Series 110 Light duty Heavy duty Cable tray and accessory covers CHAPTER 2 Support Systems Cable Ladders Series 35, 60, 85, 110 Light duty Series 35, 60, 85, 110 Middle duty Series 35, 60, 85, 110 Heavy duty CHAPTER 3 Cable Ladders Series 35 Light duty Heavy duty Series 60 Light duty Heavy duty Series 85 Heavy duty Series 110 Heavy duty Cable ladder and accessory covers Page 12
18 COMMENTS CABLE TRAYS: Cable trays are the most common solution for supporting and routing of cables in an installation. For this reason, cable trays are available in a variety of sizes and standards, in order to cover the wide range of applications. Cable trays and their accessories are classified in series Η35, Η60, Η85 and Η110 according to their profile height. It must be noted that all products displayed as perforated in this catalogue, are available in non-perforated form as well. Cable trays are delivered in 3-meter long pieces. Other lengths between 2.5m and 6m are available on request. The corrosion resistance level available for each product is noted in the following tables with the respective letter: P: Pre-galvanized metal sheet H: Hot-dip galvanized metal sheet S: Stainless steel metal sheet In addition, all available products can be delivered epoxy powder coated to any desired color. TYPE H60 STOCK LENGTH: 3000mm PRODUCT DESCRIPTION PERFORATION: for ease in cable mounting and vetilation, holes 7x30mm in crossshape and hole centers 50mm in x-axis and 25mm in y-axis are punched. BENDED EDGE: on top of side rail for reinforcement and cable protection. Cable trays can be manufactured from steel sheet pregalvanized acc. to EN ISO and also available in stock hot-dip galvanized acc. to EN ISO On request cable trays made of stainless steel sheets can be manufactured. Page 13
19 CABLE TRAYS Type H35 - Light Duty Pre-Galvanized / EN ISO X X X X X X X X Type H60 - Light Duty Pre-Galvanized / EN ISO X X X X X X X X X Type H85 - Light Duty Pre-Galvanized / EN ISO X X X X X X X Type H110 - Light Duty Pre-Galvanized / EN ISO X X X X X X X STOCK LENGTH: 3000mm Page 14 On request all products can be manufactured unperforated.
20 CABLE TRAYS Type H35 - Heavy Duty Pre-Galvanized / EN ISO X X X X X X X X Type H60 - Heavy Duty Pre-Galvanized / EN ISO X X X X X X X X X Type H85 - Heavy Duty Pre-Galvanized / EN ISO X X X X X X X Type H110 - Heavy Duty Pre-Galvanized / EN ISO X X X X X X X STOCK LENGTH: 3000mm On request all products can be manufactured unperforated. Page 15
21 CABLE TRAYS Type H35 - Extra Heavy Duty Pre-Galvanized / EN ISO X X X X X X X X Type H60 - Extra Heavy Duty Pre-Galvanized / EN ISO X X X X X X X X X Type H85 - Extra Heavy Duty Pre-Galvanized / EN ISO X X X X X X X Type H110 - Extra Heavy Duty Pre-Galvanized / EN ISO X X X X X X X STOCK LENGTH: 2500mm On request all products can be manufactured unperforated. Page 16
22 CABLE TRAYS Type H35 - Heavy Duty Pre-Galvanized / EN ISO & Epoxy Powder Coated P X P X P X P X P X P X P X P X Type H60 - Heavy Duty Pre-Galvanized / EN ISO & Epoxy Powder Coated P X P X P X P X P X P X P X P X P X Type H85 - Heavy Duty Pre-Galvanized / EN ISO & Epoxy Powder Coated P X P X P X P X P X P X P X Type H110 - Heavy Duty Pre-Galvanized / EN ISO & Epoxy Powder Coated P X P X P X P X P X P X P X STOCK LENGTH: 3000mm On request all products can be manufactured unperforated. Page 17
23 CABLE TRAYS Type H35 - Heavy Duty Hot Dip Galvanized / EN ISO X X X X X X X X Type H60 - Heavy Duty Hot Dip Galvanized / EN ISO X X X X X X X X X Type 85 - Heavy Duty Hot Dip Galvanized / EN ISO X X X X X X X Type H110 - Heavy Duty Hot Dip Galvanized / EN ISO X X X X X X X STOCK LENGTH: 3000mm Page 18 On request all products can be manufactured unperforated.
24 CABLE TRAYS Type H35 - Extra Heavy Duty Hot Dip Galvanized / EN ISO X X X X X X X X Type H60 - Extra Heavy Duty Hot Dip Galvanized / EN ISO X X X X X X X X X Type H85 - Extra Heavy Duty Hot Dip Galvanized / EN ISO X X X X X X X Type H110 - Extra Heavy Duty Hot Dip Galvanized / EN ISO X X X X X X X STOCK LENGTH: 2500mm On request all products can be manufactured unperforated. Page 19
25 CABLE TRAYS Type H35 - Heavy Duty Hot Dip Galvanized / EN ISO 1461 & Epoxy Powder Coated P X P X P X P X P X P X P X P X Type H60 - Heavy Duty Hot Dip Galvanized / EN ISO 1461 & Epoxy Powder Coated P X P X P X P X P X P X P X P X P X Type H85 - Heavy Duty Hot Dip Galvanized / EN ISO 1461 & Epoxy Powder Coated P X P X P X P X P X P X P X Type H110 - Heavy Duty Hot Dip Galvanized / EN ISO 1461 & Epoxy Powder Coated P X P X P X P X P X P X P X STOCK LENGTH: 3000mm Page 20 On request all products can be manufactured unperforated.
26 CABLE TRAYS Type H35 - Inox X X X X X X X X X X X X X X X X Type H60 - Inox X X X X X X X X X X X X X X X X X X Type H85 - Inox X X X X X X X X X X X X X X Type Inox X X X X X X X X X X X X X X STOCK LENGTH: 2500mm On request all products can be manufactured unperforated. Page 21
27 CABLE TRAY FITTINGS Cable Tray Bends 45 o - Light Duty Pre-Galvanized / EN ISO X X X X X X X X X X X X X X X X X X X X X X X X X X X X Cable Tray Bends 90 o - Light Duty Pre-Galvanized / EN ISO X X X X X X X X X X X X X X All cable tray fittings are manufactured also in heavy duty, extra heavy duty, heavy duty and epoxy powder coated, pre-galvanized or hot dip galvanized and also INOX or non perforated X X X X X X X X X X X X X X Page 22
28 CABLE TRAY FITTINGS Cable Tray TEE-pcs - Light Duty Pre-Galvanized / EN ISO X X X X X X X X X X X X X X X X X X X X X X X X X X X X Cable Tray Crossing-pcs - Light Duty Pre-Galvanized / EN ISO X X X X X X X X X X X X X X X X X X X X X X X X X X X X All cable tray fittings are manufactured also in heavy duty, extra heavy duty, heavy duty and epoxy powder coated, pregalvanized or hot dip galvanized and also INOX or non perforated. Page 23
29 CABLE TRAY FITTINGS Cable Tray Vertical Bends - Light Duty Pre-Galvanized / EN ISO X X X X X X X X X X X X X X X X X X X X X X X X X X X X Cable Tray Seperator - Pre-Galvanized / EN ISO DIMENSIONS 019.D035 35mm 019.D060 60mm 019.D085 85mm 019.D mm Cable Tray End/Reduction - Pre-Galvanized / EN ISO All cable tray fittings are manufactured also in heavy duty, extra heavy duty, heavy duty and epoxy powder coated, pre-galvanized or hot dip galvanized and also INOX or non perforated. DIMENSIONS 095.S X S X S X S X S X S X S X S X 60 Page 24
30 CABLE TRAY COVERS Cable Tray Covers - Pre-Galvanized / EN ISO X X X X X X X X ÌÇÊÏÓ: 3000 mm LENGTH: 3000 mm Cable Tray Cover Bends 45 o - Pre-Galvanized / EN ISO Cable Tray Cover Bends 90 o - Pre-Galvanized / EN ISO All cable tray covers are manufactured also in heavy duty, extra heavy duty, heavy duty and epoxy powder coated, pre-galvanized or hot dip galvanized and also INOX or non perforated. Page 25
31 CABLE TRAY COVER FITTINGS Cable Tray TEE-pc Covers - Pre-Galvanized / EN ISO Cable Tray Crossing-pc Covers - Pre-Galvanized / EN ISO Cable Tray Vertical Bend Covers - Pre-Galvanized / EN ISO All cable tray cover fittings are manufactured also in heavy duty, extra heavy duty, heavy duty and epoxy powder coated, pre-galvanized or hot dip galvanized and also INOX or non perforated Page 26
32 CABLE LADDERS Light Duty Pre-Galvanized / EN X X X X X X X X X X X X X X X X X X X X X X X X X X X X STOCK LENGTH: 3000mm PRODUCTS DESCRIPTION Ladder steps every 310mm with perforation for ease in cable mounting. Page 27
33 CABLE LADDERS Heavy Duty Pre-Galvanized / EN X X X X X X X X X X X X X X X X X X X X X X X X X X X X STOCK LENGTH: 2500mm PRODUCTS DESCRIPTION Ladder steps every 310mm with perforation for ease in cable mounting. Page 28
34 CABLE LADDERS Heavy Duty Pre-Galvanized / EN & Epoxy Powder Coated P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X STOCK LENGTH: 3000mm PRODUCTS DESCRIPTION Ladder steps every 310mm with perforation for ease in cable mounting. Page 29
35 CABLE LADDERS Heavy Duty Hot Dip Galvanized / EN X X X X X X X X X X X X X X X X X X X X X X X X X X X X STOCK LENGTH: 2500mm PRODUCTS DESCRIPTION Ladder steps every 310mm with perforation for ease in cable mounting. Page 30
36 CABLE LADDERS Heavy Duty Hot Dip Galvanized / EN 1461 & Epoxy Powder Coated P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X P X STOCK LENGTH: 2500mm PRODUCTS DESCRIPTION Construction: Ladder steps with perforation for ease in cable mounting. Page 31
37 CABLE LADDER FITTINGS Cable Ladder Lifht Duty Bend 45 o Pre-Galvanized / EN ISO WIDTH THICKNESS Cable Ladder Light Duty Bend 90 o Pre-Galvanized / EN ISO WIDTH THICKNESS Cable Ladder Light Duty TEE-pcs Pre-Galvanized / EN ISO WIDTH THICKNESS Cable Ladder Light Duty Crossing-pcs Pre-Galvanized /EN ISO WIDTH THICKNESS All cable ladder fittings are manufactured also in heavy duty, extra heavy duty, heavy duty and epoxy powder coated, pre-galvanized or hot dip galvanized and also INOX or non perforated and in all side heights PRODUCTS DESCRIPTION Ladder steps with perforation for ease in cable mounting. Page 32
38 CABLE LADDER FITTINGS Cable Ladder Light Duty Vertical Bend Pre-Galvanized / EN ISO WIDTH THICKNESS Cable Ladder Separator - Pre-Galvanized / EN ISO LENGTH: 3000mm : 039.D60 F: 049.D60 Cable Ladder Reducers-end-pc Galvanized / EN ISO WIDTH 095.S S S S S S S S Page 33
39 CABLE LADDER COVER FITTINGS Cable Ladder Covers - Pre-Galvanized / EN ISO WIDTH WEIGHT THICKNESS (F) (kg/m) , , , , , , , , Cable Ladder Bend 45 o Covers Pre-Galvanized / EN ISO WIDTH THICKNESS Cable Ladder Bend 90 o Covers Pre-Galvanized / EN ISO WIDTH THICKNESS All cable ladder cover fittings are manufactured also in heavy duty, extra heavy duty, heavy duty and epoxy powder coated, pre-galvanized or hot dip galvanized and also INOX or non perforated and in all side heights. Page 34
40 CABLE LADDER COVER FITTINGS Cable Ladder TEE-pc Covers Pre-Galvanized / EN ISO WIDTH THICKNESS Cable Ladder Crossing-pc Covers Pre-Galvanized EN ISO WIDTH THICKNESS All cable ladder cover fittings are manufactured also in heavy duty, extra heavy duty, heavy duty and epoxy powder coated, pre-galvanized or hot dip galvanized and also INOX or non perforated and in all side heights. Page 35
41 SUPPORT SYSTEMS Pre-Galvanized Connectors 016.IC IC IC IC110 CONNECTOR 35mm 60mm 85mm 110mm U-RAIL CONNECTOR 016.C X35 CONNECTOR 018.VC VC VC VC110 VERTICAL CONNECTOR 35mm 60mm 85mm 110mm On request all products can be manufactured also: hot dip galvanised according to DIN from stainless steel epoxy powder coated Page 36
42 SUPPORT SYSTEMS C Type Support Rails X Page 37
43 SUPPORT SYSTEMS Double Support C Type Rails 40 Χ Double Support C Type Rails 40 Χ x x Rail Brackets MRB 40 X40 DESCRIPTION 072.MRB MRB MRB MRB MRB MRB600 MRB 100 mm MRB 200 mm MRB 300 mm MRB 400 mm MRB 500 mm MRB 600 mm Double Rail Brackets MRB 40 X40 DESCRIPTION 072.MRBD MRBD MRBD MRBD MRBD MRBD600 MRB 100 mm MRB 200 mm MRB 300 mm MRB 400 mm MRB 500 mm MRB 600 mm Page 38
44 SUPPORT SYSTEMS Rail Joints RAIL CONNECTION ELBOW 079.MRCE45 MRCE 45 ï RAIL CONNECTION ELBOW 079.MRCE90 MRCE 90 ï 079.MRC200 RAIL CONNECTOR MRC 079.MRSH MRSH40 RAIL SAFETY HOLDER MRSH 32X20mm MRSH 40X40mm 079.MRSH MRSH40 RAIL SUPPORT PLATE MRSH 32X20mm MRSH 40X40mm Page 39
45 LIGHT DUTY SUPPORT SYSTEMS Support - pcs CEILING TRAPEZIUM FIXING 099.TRAFIX 103.LKS SUPPORT LKS LKS 079.CA7040 CEILING ELBOW 70x40mm 097.WS WS WS300 BACK PLATE SUPPORT 100mm 200mm 300mm 099.HS HS HS HS200 HANGING SUPPORT 50mm 100mm 150mm 200mm Page 40
46 LIGHT DUTY SUPPORT SYSTEMS Light Duty Support Angle DIMENSIONS 075.SA / SA / SA / SA / SA /400 Heavy Duty Support Angle DIMENSIONS 076.SA / SA / SA / SA / SA / SA /600 Light Duty U-Type Support Rail X Support Mounting Examples Page 41
47 MEDIUM DUTY SUPPORT SYSTEMS Support Rail U-Type 55x35 WEIGHT THICKNESS (kg/m) U 55x35 Ceiling Head Plate WEIGHT THICKNESS (kg/pc) U 55x35 - Rail Bracket LENGTH WEIGHT THICKNESS (kg/pc) 072.SB SB SB SB SB SB SB Page 42
48 HEAVY DUTY SUPPORT SYSTEMS Support U-Type 70x50 LENGTH WEIGHT (kg/pc) Support Bracket KTA LENGTH WEIGHT (kg/pc) 074.WB WB WB WB WB WB WB Page 43
49 EXTRA HEAVY DUTY SUPPORT SYSTEMS Support Type I80 LENGTH WEIGHT (kg/pc) 071.I I I I I I I I I Support Bracket KTT LENGTH WEIGHT (kg/pc) 071.I I I I I I I I I Page 44
50 SUPPORT SYSTEMS Support Materials C RAIL BOLTS 100.FL70451 M8 X FL70453 M8 X FL70462 M10 X FL70463 M10 X TKEM8 103.TKEM10 PROFILE CLAMPS HEAVY DUTY M8 M TRSM8 PROFILE CLAMPS LIGHT DUTY M8 CHAIN PROFILE CLIPS 103.CSM8 CABLE LADDER HOLDER 103.LKS LKS PIPE CLIPS 103.PS20 Φ20 TRAY COVER SHUTTER 050.LD INOX CUTTING DISKS 103.DC115X10X22 Á DC115X16X22 Á DC125X10X22 Á DC125X16X22 Á DC180X16X22 Á Page 45
51 SUPPORT SYSTEMS Threaded Rods DIMENSIONS LENGTH 102.TR M TR M TR M TR M TR M TR M Support Materials NUTS 103.NM NM NM NM12 M6 M8 M10 M12 SQUARE NUTS 103.PNM PNM PNM12 M8 M10 M12 SPRING NUTS 103.NMSNL8 103.NMSNL10 M8 M10 RAIL NUTS CLICK FIT 103.FL FL80308 M8 M10 WASHER 103.WM08 M8 103.WM10 M WM12 M WM08 M8 X WM10 M10 X WM12 M12 X CNM8 103.CNM CNM12 THREADED ROD CONNECTOR M8 M10 M12 Page 46
52 SUPPORT SYSTEMS Connecting Materials 100.RHBS RHBS RHSB06035 ROUND HEAD BOLTS M6 X 13 (set) M6 X 25 (set) M6 X 35 (set) 100.HB HB HB HB HB10030 HEXAGON BOLTS M8 X 15 (set) M8 X 20 (set) M8 X 25 (set) M10 X 20 (set) M10 X 30 (set) WEDGE ANCHORS 104.MA08085 M8/ MA08095 M8/ MA10070 M10/ MA10090 M10/ MA12110 M12/ WAM WAM8 104.WAM WAM12 DROP IN ANCHORS M6 M8 M10 M ST ST ST ST12 DROP IN ANCHORS TOOL M6 M8 M10 M NAM NAM NAM12 NYLON ANCHORS Ö8 Ö10 Ö12 WOOD SCREWS 101.S X S X S X S X 70 WOOD SCREW STUNDS 101.SC08080 M8 X SC08100 M8 X SC08120 M8 X SC10080 M10 X SC10100 M10X SC10120 M10 X SC10140 M10 X SC10160 M10 X 160 Page 47
CABLE ROUTING SYSTEMS. WIRE CABLE TRAYS - locking trays PRODUKTINFORMATION
C B L E S N I T T I O N CBLE ROUTING SYSTEMS WIRE CBLE TRYS - locking trays PRODUKTINFORMTION Table of Contents. Locking Cable Trays S20 - S22N, S121-S123.... Pgs 4-5 Locking Cable Trays K25 - K91... Pgs
More informationCABLE ROUTING SYSTEMS. WIRE CABLE TRAYS - standard open trays PRODUCT INFORMATION
C L E S N I T T I O N CLE ROUTING SYSTEMS WIRE CLE TRYS - standard open trays PROUCT INFORMTION Table of Contents Open cable trays S25 - S26, S30M - S35W.... Pgs 4-5 Open cable trays S36 - S39W, S30- -
More informationProduct catalogue. Aztec International S.A., ul. Bułgarska 63/65, Poznań, Poland, phone ,
Product catalogue Delivery Programme 2014 Status 02/2014 - Subject to change - Index Rail system... 4 Accessories mounting rails... 11 Rail connectors... 11 Cross connectors... 12 Module clamps... 13 Module
More informationIdeal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
More informationè PERFORATED CABLE TRAY CABLE TRAYS
PERFORATED CABLE TRAY CABLE TRAYS CABLE TRAY CT CT cable tray, is made of sheet steel 0.8 up to 1.5mm thickness. The final product (standard edition), is pregalvanized (EN 10147) and it is suitable for
More informationGratings. From building facades to heavy vehicle traffic. Types and versions. We can help you choose
Grating Gratings From building facades to heavy vehicle traffic Gratings are typically used in industrial settings and environments with stringent safety requirements. However, they can also be used as
More informationReduces installation time Locks tray into position - no hardware required
Tablok Profile Reduces installation time ocks tray into position - no hardware required TabokSystem Drastically reduce installation time with the Tabok profile. Used to mount tray on walls, floors and
More informationDimensions in mm in mm in. R in mm in mm mm. Weight. Dimensions in.
Wall Termination / Universal Blind End 1.950 in. 49.53 mm 0.463 in. 11.76 mm 1.00 in. 25.4 mm 0.75 in. 19.05 mm 9.50 in. 241.3 mm R 0.156 in. 3.962 mm 1.962 in. 49.83 mm 0.367 in. 9.322 mm 0.962 in. 24.43
More informationSYSTEM 25 SYSTEM 50 AS SYSTEM 63 SYSTEM 75 SYSTEM 100. Alsident System 50. Antistatic (AS) Product Information
Alsident System 50 Antistatic (AS) Product Information . System 50 Antistatic General Information Product Specification Product description System 50 Antistatic Alsident System Airflow between 45-85 m
More informationPowder coated. Hot dip galvanised and powder coated Throughbolt anchor, Page /
TRAFFIC-LINE Protection Bollard Product description page 28 Bollard 1,000mmH, yellow, for surface mounting Dimension Finish weight (kg/ea.) Powder coated 194.15.516 1,000 x 100 x 100 16 10 / 15 days Hot
More informationE-LINE TLS CABLE TRAY SYSTEMS. Mesh Wire Cable Tray TLS TLS.
E-LINE TLS LE TRY SYSTEMS TLS Mesh Wire able Tray TLS www.eae.com.tr TLS able asket able asket Modules E-Line TLS TLS + Intersection Module TLS Flat Tee Module TLS orizontal Elbow Module ONTENTS 2- able
More informationnls Product List 1st February, 2014 Tel: Fax: Coombes Drive, Penrith, NSW, 2750 Australia
15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical Accessories Code Item Inner
More informationlindab duct suspension & support system Duct suspensions & Support systems
Duct suspensions & Support systems Content Duct suspensions & Support systems Duct suspension Duct suspension FB... UVH... 0 UVH0... 0 Threaded rod OSB 0...0 DRSN... 0 DRSNR... 0 Channels and channel brackets
More informationNorth US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183
North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06
More informationChannels and Bracketery
Channels and Bracketery Channel Sections and Cantilever Arms CSS1/ CSS1/ CSS1/ CSS1/ CSS1 CSS1 CS1/ CS1/ CS1/-HDG CS1/-SS CS1/ CS1/ CS1/-HDG CS1/-HDG CS1/-SS CSL1 Material thickness: 1.mm Weight: 1.1 kg/m
More informationTILBURY STEEL SERVICE CENTRE
TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury
More informationSCREWED ELECTRO GALVANISED CONDUIT CLASS 3. AS/NZ CONDUIT ELECTRO GALVANISED ( 4 M LENGTHS ) CONDUIT HOT DIP GALVANISED ( 4 M LENGTHS )
SCREWED ELECTRO GALVANISED CONDUIT CLASS 3. AS/NZ 2053.7 CONDUIT ELECTRO GALVANISED ( 4 M LENGTHS ) COND20GAL COND25GAL COND32GAL COND40GAL COND50GAL 20 mm Electro Galvanised 4 metre 25 mm Electro Galvanised
More information11. Wall and Floor Mounted Clips
11. Wall and Floor Mounted Clips The Flamco s BM range of wall mounted clips is designed for installing threaded tubes, sprinkler pipes, thin wall steel tubes and copper pipes. These one piece clips, complete
More informationROLLING COUNTER SHUTTERS
500 ROLLING COUNTER SHUTTERS EXCEPTIONAL SECURITY AND AESTHETICS WAYNE DALTON COMMERCIAL DOOR SYSTEMS The Wayne Dalton Rolling Counter Shutter system provides the perfect solution for smaller openings
More informationService poles for industrial applications
Service poles for industrial applications Ready to go. The ISS basic profile Our industry service poles bundle power, data and compressed air in a compact and robust manner. This means relocations, for
More informationWrought Iron Brochure
Wrought Iron Brochure Page 2 Spikes 9211 24mm 125x63mm 9212 26mm 140x70mm 9213 28mm 170x85mm 126/B/6 20mm 80x45mm 126/B/7 25mm 125x64mm 126/B/8 38mm 140x80mm 9543 13mm 133x59mm 9542 14mm 153x70mm 9541
More informationNational Light Sources Pty Ltd Electrical Accessories - Date 8th April, Coombes Drive, Penrith, NSW, 2750 Australia
National Light Sources Pty Ltd 15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical
More informationMIRROR POLISHED POSTS See page 46
PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.
More informationMetfab - 7 Ricdanic Drive, BAYSWATER,Vic,3153 Ph:
Mild Steel Flat Mild Steel Flat 10x3 4m Rydal 65x5 6m Flat 13x3 4m Rydal 65x6 6m Flat 13x5 4m Rydal 65x8 6m Flat 16x3 4m Rydal 65x10 6m Flat 16x5 4m Rydal 65x12 6m Flat 16x8 6m Flat 75x5 6m Flat 20x3 6m
More informationHot Rolled Steel Products. Contents
Hot Rolled Steel Products Contents Angles 2 Bar Gratg 3 Beams & Tees 4 Cap Rail 6 Channels 6 Expanded Metal 8 Flats & Strip 9 Floor Plate 12 Grip Step 13 Ladder Rung 13 Pipe 13 Plate 14 Rebar 14 Rounds
More information060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
More informationWIRE AND CABLE MANAGEMENT
Wire and Cable Management Solutions A variety of items are available for managing and organizing wire and cable in common systems and cabinet environments. From cable rack, auxiliary framing to network
More informationROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.
ROUND BEND U-BOLTS Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2)
More informationSHELVING 45 AND TYRE RACKS
AND TYRE RACKS AND TYRE RACKS Particularly suitable for the storage of heavy and bulky materials (cannot be used as a pallet rack). Made entirely of certified first grade steel sheet and profiled with
More informationIRONRIDGE PRODUCT CATALOG
IRONRIDGE PRODUCT CATALOG Effective March 15, 2011 Product Catalog March 15, 2011 2 What s New: 1. New Products: a. End Caps for XRS and XRL Rails Page 6 b. End Clamps I, J, K, Page 7 and updated sizing
More informationThe cable tray system KP EBO Systems (manufactured by pultrusion) provides maximum fl exibility and effi ciency and a support distance of up to 4 m.
CALE TRAY SYSTEM GFK KP KSystem KP Cable tray systems available in height 50 80 110 Cable trays Dividers Covers Accessoires Fittings 54 The cable tray system KP EO Systems (manufactured by pultrusion)
More informationElectrical Accessories 1st June, 2016
15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical Accessories Code Item Inner
More informationHot dipped, galvanised steel (pre-galvanised) Supplied in 3 metre lengths Return flanged, perforated tray 50MM 75MM 100MM 150MM 225MM 300MM 450MM
Steel Cable Tray Light Duty Cable Tray Medium Duty Tray Hot dipped, galvanised steel (pre-galvanised) Supplied in 3 metre lengths Single flanged, perforated tray Hot dipped, galvanised steel (pre-galvanised)
More informationGALVANIZED-COATED SHELFING SYSTEM SHELVING FOR FOOD
ALVANIZED-COATED SHELFIN SYSTEM SHELVIN FOR FOOD ALVANIZED COATED SHELVIN ALVANIZEDRAL 7035 Entirely made of first grade steel and cold-profiled with galvanized steel according to the Sendzimir process
More information10. EMC accessories. Chapter. EMC shield rails and accessories 10.3 EMC shield clamps and accessories 10.7 Earthing strips Cable clips 10.
10. EMC accessories Chapter EMC shield rails and accessories 10.3 EMC shield clamps and accessories 10.7 Earthing strips 10.11 Cable clips 10.13 More Informations about cabinet wiring with LÜTZE LSC AirSTREAM:
More informationSeries 75. Steel Roller Shutters
Roller Shutters consist of individual interlocking steel slats, providing high strength security for commercial and industrial applications such as factories, loading docks, workshops and warehouses. FEATURES
More informationROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.
Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2) hex nuts. In addition,
More informationStairtreads and landings
Stairtreads and landings Stairtreads and landing Weland manufactures straight stairtreads and landings from grating, slit plank type flooring and plank type flooring. The majority of the stairtreads and
More information1COMPRESSION FITTINGS
SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and
More informationPanel Enclosures. Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet
Panel Enclosures Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge steel (see page 153) All continuous
More informationPMCL Series Mounts RACK/CEILING/WALL MOUNTS, UNIVERSAL CAMERA MOUNT, MONITORS
PRODUCT SPECIFICATION control site PMCL Series Mounts RACK/CEILING/WALL MOUNTS, UNIVERSAL CAMERA MOUNT, MONITORS Product Features For Use with VESA -Compliant Monitors Rack Mounts for All 200/300/400 Series
More informationAIR TERMINALS: COPPER
AIR TERMINALS: COPPER A ADAPTER TYPE B LESS ADAPTER LA TYPE A B C A B C A B C 3 8 COPPER POINTS (CLASS I ONLY) 1 2 COPPER POINTS (CLASS I OR II) 5 8 COPPER POINTS (CLASS I OR II) THE 3 8 COPPER AND ALUMINUM
More informationData Sheets Wiring Components. Fanning Strips. Guide Rings and Holder. Guide Hooks. Spacer Bars. Dummy Plates. Contact. Christian Jaramillo-Arriagada
Data Sheets Wiring Components Fanning Strips Guide Rings and Holder Guide Hooks Spacer Bars Dummy Plates Contact Fax: 0621 683206777 Fanning Strips Wiring Components For a clear connecting arrangement
More informationMultitronic. Technical data
Multitronic EMC Aluminium enclosure system for MCR technology Integrated guide grooves for PCB s External mounting slots with spring nuts Technical data Material: DIN EN 573 EN AW-AlMgSi Ingress protection:
More informationTimken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly
Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication
More informationAccessory Guide Indoor AP Accessories
Indoor AP Accessories INDOOR SKU Compatible Products Description Kit Contents 902-0120-0000 R720 R710 R700* R600* R610* R500* R510* R310 * fits AP, but does not support padlock security Multipurpose mounting
More informationAccessory Guide ZoneFlex Indoor AP Accessories
ZoneFlex Indoor AP Accessories INDOOR SKU Compatible Products Description Kit Contents 902-0120-0000 ZoneFlex R720 ZoneFlex R710 ZoneFlex R700* ZoneFlex R600* ZoneFlex R610* ZoneFlex R500* ZoneFlex R510*
More informationArgenta W A L L M O U N T I N G M E T A L C A B I N E T S
Argenta W A L L M O U N T I N G M E T A L C A B I N E T S The ARGENTA Series is a group of metal enclosures used to house on the inside electrical or electronic switchgear, controlgear and equipment necessary
More informationFLEXIMARK Cable Marking Systems
Custom Plastic Marking Systems 598 UNITRONIC Bus Cables & Connectors MINI/MAXI Plastic Marking Systems 599 Print-Your-Own Plastic Marking Systems 607 Custom Stainless Steel Marking Systems 610 Stainless
More informationAcoustic baffle system
OWAconsult collection Unit Acoustic baffle system Unit mineral tiles Unit Constellation α w = 0.60 NRC = 0.6 Technical data mineral tiles Dimensions Material Heights: 0 mm, 00 mm lengths: 00 mm, 0 mm,
More informationProducts Catalogue I. Mounting runners and components:
I. Mounting runners and components: 110111-R Mounting runner 40*40 mm M8 slot nut / M10 bolt length: 6.100 mm span width as per statics 110111-N 110112-R Mounting runner 40*40 mm with sideward screw channel
More informationRobust Clamps Shock-proof load range
Robust Clamps Shock-proof load range Your application takes centre stage Robust Clamps Stainless steel Features: Extremly strong Vibration proof Impact and shock load... specific demands require specific
More informationRequired Tools. Ford Transit Connect J4075 with R16 Tracks TRANSIT CONNECT 69 RAIL IBI. Marker. 7/16 / 9/16 / 1/2 Wrench.
IBI Required Tools INSTRUCTION MANUAL Marker 7/16 / 9/16 / 1/2 Wrench Drill with 3/8 Drill Bit Allen Key Ford Transit Connect J075 with R16 Tracks Part # J075 Rails 96 Bars 55 [ ] BLACK WHITE SILVER [
More informationbar Round (303S31) Round (303S31) Bright Drawn H9 Dia (in) Weight/m (Kg) Weight/m (Kg) Dia (in) 20mm
A World of Metal bar mm mm mm mm mm 7mm mm 9mm 0mm 0.0 0.0 0.0 0.0 0. 0. 0.9 0. 0. 0.0 0. 0.9 0.0 0.0 0. 0. 0.7 mm mm mm mm mm 7mm mm 0mm mm mm mm 0.9 0.99.0...9.7..00..7.9.0...0 (0S) Bright Drawn H9
More informationMETRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL
METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL CHAINWHEELS Page 2 Ductile Iron wheels Sprocket-Type, for use with Single Loop Cut Used to operate overhead valves from
More informationWHOLESALE TO THE INDUSTRY
YORK MANUFACTURING SERVICES 65 ST. REGIS CRES. NORTH, TORONTO, ONT. M3J 1Y9 WHOLESALE TO THE INDUSTRY We, at York Manufacturing Services (Y.M.S.) have been in the business of supplying the sign industry
More informationOTHER FLAGPOLES 3 Other flagpoles FLAGMORE ACTION / Flagpole 6-2 meters Flagpole for temporary in ground installation. Delivered complete with cleat holes. Cleat holes on,5 m from the bottom or at any
More information3630P Encl 34X28 Enclosure Panel. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 3630P Encl 34X28 Enclosure Panel Cooper B-Line/Cable Tray Manufacturer Weight per unit Product Category Features Material
More informationwire guards PLAST D FUSERS FLUORESCENT LIGHTING FIXTURE PROTECTION Wire Guards / Fluorescent lighting fixture protection / Product Description:
Wire Guards FLUORESCENT LIGHTING FIXTURE PROTECTION Wire Guard units offer an inexpensive way to protect light fixtures from excessive abuse. Wire Guard units can be fabricated to fit most shapes of light
More information09LD/GD. Air-Cooled Condensers/Air-Cooled Fluid Coolers. Nominal cooling capacity kw 09LD/GD 09GD
Air-Cooled Condensers/Air-Cooled Fluid Coolers 09LD/GD 09GD 09LD/GD Nominal cooling capacity 281-987 kw The 09LD air-cooled condensers are designed for refrigeration plants where a halogenated hydrocarbon,
More informationFLEXBOX. Installation Guide
FLEXBOX Installation Guide FLEXBOX 1 Important Safety Instructions WEIGHT LIMIT MAXIMUM WEIGHT 50 LBS. THE STRUCTURE TO WHICH THE BOX IS MOUNTED (CEIL- ING, WALL, TABLE, POLE) MUST BE ABLE TO SUPPORT FIVE
More informationData sheet. Server Rack ( heavy duty rack cabinet ) W:600 = D:1000
Data sheet Server Rack ( heavy duty rack cabinet ) General description This is a unique server enclosure which is designed for housing heavy server & Networking systems, Server Rack cabinets are compatible
More informationCNC Tool Storage Solutions
CNC Tool Storage Solutions Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes itself in
More informationSection 1 Specialty Profiles
Contents Basic Series 17-31 Section 1 Basic & Specialty Specialty 32x18 Frame 45-46 & End Caps 30 Series 32-35 Door Rolling Door Guide 47 Sliding Door Guide 48 28 Series 36- Panel Stiffener/Handle 49 Panel
More information604 SOCKET HEAD BUTTON SCREWS
600 SOCKET HEAD CAP SCREWS Page........626 634 602 SOCKET SET SCREWS 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS Page........635 636 Page........637
More informationCLAMPS & SUPPORTS CATALOG
ISO-900:2008 CLAMPS & SUPPORTS CATALOG Phone: 28 96 0900 Fax: 28 96 000 Email: sales@expotechusa.com Web: expotechusa.com 32 Cat. No. Page Cat. No. Page Cat. No. Page 07667... 6 03936... 2 038292... 0
More informationFlamco Mounting products
M O U N T I N G P R O U C T S 8 Flamco Mounting products K BALL AN HINGE JOINT VG ANGULAR PLATE KCL PROFILE CLAMP GP MOUNTING PLATE BMG ASSEMBLY STRIP Edition 2007 / UK Mounting products The best flexible
More informationJUMO PINOS L01. Calorimetric flow sensor. Brief description. Special features. Customer benefits. Data Sheet
sales@jumo.co.uk info.us@jumo.net Page 1/9 JUMO PINOS L01 Calorimetric flow sensor Brief description The JUMO PINOS L01 flow sensor serves the measuring and monitoring of flow velocities of water and aqueous
More information52 x 50 x light-grey, similar to RAL 7035 CM /1 CM 52/DT /1 CT /1 CT 52/DT /1 M A/B C/D PG A/B C/D
Polycarbonate/ABS housings Protection class: IP66 acc. to EN 60529 Protective insulation: complete protective insulation Burning behaviour PC: UL 94-V2 Burning behaviour ABS: UL 94-HB Toxicity: halogen-free
More informationCNC Tool Storage Solutions
CNC Tool Storage Solutions Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes itself in
More informationCABLE TRAY SYSTEM 234
CALE TRAY SYSTEM 234 235 WALKALE CALE TRAY SYSTEM Heavy Duty Cable Tray solid, splice plate not included S RSUS 110.100OV 110/4,3 100/3,9 2 S RSUS 110.200OV 110/4,3 200/7,8 2 S RSUS 110.300OV 110/4,3 300/11,7
More informationFIXPOINTS PICTORIAL INDEX
Cable Support Systems 149 FIXPOINTS PICTORIA INDEX FASTENERS AND CONNECTORS HN Hexagon Nuts [/] FW Flat Washers [/]. Dia. HN06 HN06H M6 0.15 100 HN08 HN08H M8 0.46 100 HN10 HN10H M10 0.75 100 HN12 HN12H
More informationE-KAB N E SERIES WALL- MOUNTED DISTRIBUTION SWITCHBOARDS
E-KAB N E SERIES WALL- MOUNTED DISTRIBUTION SWITCHBOARDS DUVAR T P TES SAT KAB NLER www.eae-et.com.tr EAE Elektroteknik A.S. reserves rights to make changes within this document without prior notice. CONTENTS
More informationCom-Tray. Under Floor. Labor-saving assembly Field proven and tested Superior construction Shipped ready to assemble
Com-Tray Chalfant, a leading supplier of cable trays and systems for utilities, industrial plants, and commercial service, offers Com-Tray, a unique modular, cost-saving system for routing and protecting
More informationSECTION CONTENTS COMPUTER BRACKETS COMPUTER BRACKET WORKSHEET MOUNTING BRACKETS
PC BOARD HARDWARE SECTION CONTENTS COMPUTER BRACKETS........... 123-125 COMPUTER BRACKET WORKSHEET. 126-127 MOUNTING BRACKETS................ 118-119 PC BOARD ACCESSORIES Board Guides..........................
More informationPOLE DISPLAY SOLUTIONS & ACCESSORIES
& ACCESSORIES Pole Display Solutions Litho poles and bases are an excellent and versatile way to highlight a message. Pole dimensions are in lengths from two to six feet and 1 to 1-3/4 inch diameters.
More informationLift Up Floor Locks Multi-Directional Castor. W Series. M Series (full stainless steel) WHEELS & CASTORS
Lift Up Floor s Multi-Directional Castor K Series M Series O Series M Series (full stainless steel) W Series WHEELS & CASTORS WWW.SITECRAFT.COM.AU WHEELS & CASTORS Lift Up Floor s Used on warehouse trolleys,
More informationExtract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
More informationVision To be recognized as the top roller shutter manufacturer in Malaysia through our people, quality of products and commitment to our clients.
PROFILE COL Shutters Specialists was established in 1986 as a manufacturer and supplier of roller shutters across Malaysia. In order to become the leading roller shutter manufacturer in Malaysia, we continue
More informationInForm Superstructures
Advantages InForm racks are fitted between the vertical profiles and thus ensure a generous amount of open working table surface. Devices are installed directly in the 3HU and 6HU racks, additional devices
More informationmodular enclosure MUREVA, IP65 weatherproof & versatile enclosures aesthetics multi-functional evolutionary ergonomics and time saving security
aesthetics c Elegant and robust design. c Colour easy to integrate in any environment. weatherproof & versatile enclosures multi-functional c Different solutions for: industrial control, electrical distribution,
More information20CATALOGUE 14PRODUCT. Monolyth has a wide range of 19 rack for equipment storage lockers
20CATALOGUE 14PRODUCT MONOLYTHCABINETS Monolyth has a wide range of 19 rack for equipment storage lockers of various sizes to meet any space requirements or needs, offering maximum performance in, computer,
More information4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT
4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT Y1 1710 2690 1710 2690 0 10 0 10 set by hand or by optional RCU (Remote Control Unit) X Y2 X 65 65 4-Port Antenna 1710 2690/1710
More informationUltrasonic Flow Meter Brochure
Ultrasonic Meter Brochure Rev. 2011/06/10 www.sitelab.us.com Descriptions SL1168 Ultrasonic meter uses the latest digital technology and low-voltage broadband pulse transmission. The instrument is tolerant
More informationFLEXIMARK Cable Marking Systems
Custom Plastic Marking Systems 598 UNITRONIC Bus Cables & Connectors MINI/MAXI Plastic Marking Systems 599 Print-Your-Own Plastic Marking Systems 607 Custom Stainless Steel Marking Systems 610 Stainless
More informationLaserlyte Alignment System
Laserlyte Alignment System A Global Laser Brand The LaserLyte alignment system is a unique, user adjustable, plug and play system suitable for a wide range of applications, i.e. alignment and these applications
More informationSTAKE POCKET AND RAIL CLAMP LAYOUT (6302 & 6314) - PAGE 1 B - End 6302 A - End 6302 Centerline of stake pockets
STAKE POCKET AND RAIL CLAMP LAYOUT (6302 & 6314) - PAGE 1 B - End 6302 A - End 6302 Centerline of stake pockets ( Typical D&RGW cast stake pocket) 40 over the end sills 2-11 6-4 9-9 13-2 16-7 20-0 20-0
More informationItems Dimension(WxDxH) Max.Capacity Mounting P-FDB8 181X45X207mm 8 ports & splice Pole/Wall P-FDB16 220x80x300mm 16 ports & splice Pole/Wall
P-FDB General Features Available in 2 sizes, P-FDB8 and P-FDB16 Can accommodate 1x8 / 1X16 PLC splitters and 8 / 16 SC adapters Ultra violet resistant and waterproof Wall and pole mountable 2 inlet ports,
More informationKully Reference Book
Kully Reference Book Serving the Greater Mid-West since 1946 Angles Channels Beams Rounds Sheets Squares Flats Rebar Wire Mesh Black & Galvanized Pipe Anchor Bolts Plastic, Copper, Black, Galvanized Pipe
More information37 Polished Stainless Steel
80 BAWER 81 82 1,5 mm SERIES BAWER 37 37 Polished Stainless Steel Example of fitting-out Stainless Steel AISI 304/X5CrNi18-10/1.4301-2R Thickness mm 1,5 Mechanical resistance; water resistance Laser and/or
More informationWeatherproof enclosures for all corrosive environments
IP 66 MRIN INETS N ENLOSURES >>> Marina cabinets polyester - IP 66 - IK 10 www.klinkmann.com Weatherproof enclosures for all corrosive environments 362 56 362 76 Technical characteristics (p. 289) IP 66
More information10.0 Enclosures Enclosures. Integrated Routing Connectorised Fibre Enclosure 143. Integrated Routing Fibre Enclosure 144. Integrated Routing 145
10.0 Integrated Routing Connectorised Fibre Enclosure 143 Integrated Routing Fibre Enclosure 144 Integrated Routing 145 Integrated Routing Module 146 CPU - Customer Premise Unit 147 BFP - Building Flexibility
More informationBall and Socket Shafts Series 0.800
Ball and Socket Shafts Series 0.0 Ball and Socket Shafts Series 0.0.1 Size 0..9 Md max Nm double, with length compensation, Standard bore Spline profile Standard bore Spline profile Standard bore When
More informationCombi-System. Composition pipe Copipe
Combi-System Composition pipe Copipe no. Composition pipe Copipe white rolls DN 10 x 2.0 mm length per roll 50 m 150 10 54 length per roll 100 m 150 01 54 length per roll 200 m 150 02 54 DN 12 16 x 2.0
More informationSnap locks and door locks
TopLine Cabinets - type A The modern design of the TopLine cabinets creates a visual calmness in the department. Behind the calm exterior you will find a highly functional diverse interior with endless
More informationTYPE 4/12 PREMIER SERIES
Type 4 / 12 Enclosures TYPE 4/12 PREMIER SERIES ENCLO- Contemporary Contemporary Design Design Seamless Seamless Foam-In-Place Foam-In-Place Gasketing Gasketing Utility Utility Brackets Brackets for for
More informationAssembly and Setup Manual
M-12 Series Copyboard / C-12 Series Captureboard Assembly and Setup Manual This is the installation and assembly manual for the M-12 series Copyboard and C-12 series Captureboard. (The copyboard and/or
More informationCable tray systems. 04 KTS Masterkatalog Länder / en / 25/10/2016 (LLExport_04366) / 25/10/ Always indicate the item number when ordering.
Cable tray systes 62 Cable tray KRS 64 Accessories KRS 68 6 , side Cable tray KRS, side KRS 00 FS KRS 020 FS KRS FS KRS 040 FS KRS 050 FS KRS 060 FS Width Useful ength crosssection c² 2 000 84 200 2 000
More informationACO Access Covers. ACO Access Covers. ACO technical catalogue ACO Access Cover UNIFACE PAVING SOLID
ACO Access Covers ACO Access Covers ACO technical catalogue ACO Access Cover UNIFACE PAVING SOLID ACO gully Content General introduction 3 page UNIFACE ACO Access Covers UNIFACE 4 ACO Access Covers UNIFACE
More informationEXTENSA. Motorized projection screen for wall or ceiling installations. Product specifications: Aspect Ratios: Available dimensions
Motorized projection screen for wall or ceiling installations Product specifications: Electrically operated projection screen 230 volt (50Hz) with a usage of no more than 4 Ampere (158.7 Watt). The motor
More information