Aluminum Electrolytic Capacitors Radial High Temperature Standard

Transcription

1 Aluminum Electrolytic Capacitors Radial High Temperature Standard Longer life Higher temperature 038 RSU 105 C 125 C 140 RTM Lower Z Lower Z 150 RMI 146 RTI Fig. 1 QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 5 x 11 to 18 x 40 Rated capacitance range, 1 μf to μf Tolerance on ± 20 % Rated voltage range, U R 10 V to 450 V Category temperature range -40 C to +105 C Endurance test at 105 C 2000 h Useful life at 105 C 2500 h Useful life at 40 C, 1.6 x I R applied h Shelf life at 0 V, 105 C 1000 h FEATURES Useful life: 2500 h at 105 C Miniaturized, high CV-product per unit volume Charge and discharge proof Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case, insulated with a blue sleeve Pressure relief for case Ø D 6.3 mm Material categorization: for definitions of compliance please see APPLICATIONS Industrial, telecom and domestic appliances Decoupling, smoothing, filtering, buffering in SMPS Portable and mobile equipment (small size, low mass) MARKING The capacitors are marked (where possible) with the following information: Rated capacitance (in μf) Tolerance on rated capacitance, code letter in accordance with IEC (M for ± 20 %) Rated voltage (in V) Date code, in accordance with IEC Code indicating factory of origin Name or logo of manufacturer Negative terminal identification Series number (142) Based on sectional specification IEC / EN Climatic category IEC / 105 / 56 Revision: 19-Sep-16 1 Document Number: 28402

2 SELECTION CHART FOR, U R, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) U R (V) x x x x 11 8 x x x 11 8 x x x x 11 5 x x 11 8 x x x x x 11 8 x x x x 11 8 x 12 8 x x x x x 11 8 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x SELECTION CHART FOR, U R, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) U R (V) x 11 5 x x x 11 8 x x x 11 8 x 12 8 x x x 12 8 x x x x x x x x x x x x x x x x x x x x x x x x x x Revision: 19-Sep-16 2 Document Number: 28402

3 DIMENSIONS in millimeters AND AVAILABLE FORMS Ø D Ø D L F 15 min. Ø d 5 min F Ø d Fig. 2 - Form CA Long leads Fig. 3 - Form CB Cut leads Dimensions of lead space F see Table 2 Fig. 4 - Form TNA, Form TFA Taped in box (ammopack), straight leads Case Ø D = 5 mm to 8 mm; Lead space F is 5 mm Fig. 5 - Form TFA Taped in box (ammopack), formed leads Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE Ø D x L CASE CODE Ø d Ø D max. L max. F MASS (g) FORM CA Note For detailed tape dimensions please refer to packaging information: PACKAGING QUANTITIES FORM CB FORM TFA, TNA 5 x ± x ± x ± x ± x ± x ± x ± x ± x 20 19a ± x ± x ± x ± x ± x ± x ± Revision: 19-Sep-16 3 Document Number: 28402

4 ELECTRICAL DATA SYMBOL DESCRIPTION Rated capacitance at 100 Hz, tolerance ± 20 % I R Rated RMS ripple current at 100 Hz, 105 ºC I L2 I L5 tan Max. leakage current after 2 min at U R = 10 V to 100 V Max. leakage current after 5 min at U R = 200 V to 450 V Max. dissipation factor at 100 Hz Note Unless otherwise specified, all electrical values in Table 2 apply at T amb = 20 C, P = 86 kpa to 106 kpa, RH = 45 % to 75 %. ORDERING EXAMPLE Electrolytic capacitor 142 series 470 μf / 25 V; ± 20 % Nominal case size: Ø 10 mm x 12 mm; Form TFA Ordering Code: MAL E3 Table 2 ELECTRICAL DATA AND ORDERING INFORMATION ORDERING CODE MAL NOMINAL I U R I R CASE SIZE 100 Hz L2 BULK PACKAGING tan FREQ. TAPED AMMOPACK 100 Hz 2 min (V) Ø D x L 105 ºC 100 Hz CODE (μa) (1) LONG LEADS CUT LEADS (mm) (ma) FORM F FORM F FORM F FORM F CA (mm) CB (mm) TNA (mm) TFA (mm) x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E Revision: 19-Sep-16 4 Document Number: 28402

5 ELECTRICAL DATA AND ORDERING INFORMATION ORDERING CODE MAL NOMINAL I U R I R CASE SIZE 100 Hz L2 BULK PACKAGING tan FREQ. TAPED AMMOPACK 100 Hz 2 min (V) Ø D x L 105 ºC 100 Hz CODE (μa) (1) LONG LEADS CUT LEADS (mm) (ma) FORM F FORM F FORM F FORM F CA (mm) CB (mm) TNA (mm) TFA (mm) x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E x MF E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E Revision: 19-Sep-16 5 Document Number: 28402

6 ELECTRICAL DATA AND ORDERING INFORMATION ORDERING CODE MAL NOMINAL I U R I R CASE SIZE 100 Hz L2 BULK PACKAGING tan FREQ. TAPED AMMOPACK 100 Hz 2 min (V) Ø D x L 105 ºC 100 Hz CODE (μa) (1) LONG LEADS CUT LEADS (mm) (ma) FORM F FORM F FORM F FORM F CA (mm) CB (mm) TNA (mm) TFA (mm) x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E E x MF E E Note (1) Determines the applicable row in the table Multiplier of Ripple Current (I R ) as a Function of Frequency Revision: 19-Sep-16 6 Document Number: 28402

7 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage U s 1.15 x U R Reverse voltage U rev 1 V Current After 2 min at U R = 10 V to 100 V I L x U R or 3 μa, whichever is greater Leakage current I After 5 min at U R = 200 V to 450 V L x U R + 15 μa ( x U R 1000) I L x U R + 25 μa ( x U R > 1000) Inductance Case Ø D 8 mm Typ. 13 nh Equivalent series inductance (ESL) Case Ø D = 10 mm Typ. 16 nh Case Ø D 12.5 mm Typ. 18 nh Resistance Equivalent series resistance (ESR) Calculated from tan max. and (see Table 2) ESR = tan /2 f CAPACITANCE (C) 1.2 C C C 0 = Capacitance at 20 C, 100 Hz Curve 1: 10 V Curve 2: 63 V Curve 3: 100 V T amb ( C) 1.1 C C Curve 1: 10 V Curve 2: 63 V Curve 3: 100 V 10 2 C 0 = Capacitance at 20 C, 100 Hz f (Hz) 10 4 T amb (20 C) Fig. 6 - Typical multiplier of capacitance as a function of ambient temperature Fig. 7 - Typical multiplier of capacitance as a function of frequency RIPPLE CURRENT AND USEFUL LIFE Table 3 ENDURANCE TEST DURATION AND USEFUL LIFE ENDURANCE USEFUL LIFE AT 105 C AT 105 C (h) (h) Note Multiplier of useful life code: CCC206 Revision: 19-Sep-16 7 Document Number: 28402

8 I A I R CCC Lifetime multiplier I A = Actual ripple current at 100 Hz, 105 C I R = Rated ripple current at 100 Hz, 105 C (1) Useful life at 105 C and I R applied (1) T amb ( C) Fig. 8 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 4 MULTIPLIER OF RIPPLE CURRENT (I R ) AS A FUNCTION OF FREQUENCY Table 5 FREQUENCY (Hz) FREQ CODE I R MULTIPLIER MF MF MF TEST PROCEDURES AND REQUIREMENTS TEST PROCEDURE NAME OF TEST REFERENCE (quick reference) IEC / Endurance EN T amb = 105 C; U R applied; 2000 h subclause 4.13 Useful life Shelf life (storage at high temperature) Surge CECC subclause IEC / EN subclause 4.17 IEC / EN subclause 4.14 T amb = 105 C; U R and I R applied; 2500 h T amb = 105 C; no voltage applied; 1000 h After test: U R to be applied for 30 min, 24 h to 48 h before measurement From source of 1.15 x U R : RC = 0.1 s ± 0.05 s; 1000 cycles of 30 s on, 330 s off, at 105 C REQUIREMENTS C/C: ± 20 % tan 2 x spec. limit I L5 spec. limit C/C: ± 30 % tan 3 x spec. limit I L5 spec. limit no short or open circuit total failure percentage: 1 % C/C: ± 20 % tan 2 x spec. limit I L5 spec. limit C/C: ± 25 % tan 1.5 x spec. limit I L5 spec. limit Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 19-Sep-16 8 Document Number: 28402

9 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000