MK-EZ PROFILER OWNER'S MANUAL, PARTS LIST & OPERATING INSTRUCTIONS

Transcription

1 MK-EZ PROFILER OWNER'S MANUAL, PARTS LIST & OPERATING INSTRUCTIONS Revision Manual Part No OM Caution: Read all safety and operating instructions before using this equipment. This owners manual MUST accompany the equipment at all times.

2 EXPLODED VIEW MK-EZ PROFILER PART #

3 PARTS LIST MK-EZ PROFILER PART # ITEM DESCRIPTION PART# OTY. 1 HOSE, VINYL, 1/4 X 3/8 (6.0') PUMP, WATER 115V/60HZ UL/CSA VP 1 3 CARTON, 13-1/2 X 12-1 X 9-3/ WRENCH, TILESAW, 11/16 OPEN END SCREW, SOCKET HEAD CAP 3/8-16 X CARD, WARRANTY REGISTER SAW TAG, SERIAL NUMBER, BLANK RW 1 8 SCREW, SOCKET HEAD CAP 3/8-16 X DRAIN PLUG, W/RING MASONRY LABEL SHEET (NOT SHOWN) CARTON, MK100/101 SERIES PL KR PL 1 12 CARTON, TRAY, MK-100/ ADAPTER, 1/2 NPT X 1/4 BARB OWNERS MANUAL, MK-EZ PROFILER OM 1 15 ASSY, MOTOR, 120V, EZPR ASSY, FRAME AND TABLE, EZPR WRENCH, 1" OPEN END, THIN SHEET, LABEL, EZPR ASSY, PAN, EZPR MMK-400BDB 3-1/2 X /8R

4 EXPLODED VIEW MK-EZ PROFILER ASSY, MOTOR PART #

5 PARTS LIST MK-EZ PROFILER ASSY, MOTOR PART # ITEM DESCRIPTION PART# OTY. 1 WASHER, FLAT, USS, 3/ SCREW, 3/8-16 X 1-1/4 HEX HEAD CAP CLAMP, CUSHION LOOP 3/ SCREW, FLAT HEAD 1-32 X 5/ 8" MTR, ELECT, 7.4 AMP 120V R 1 6 SCREW, 8-32 X 3/8 PAN HEAD PHILLIPS KNOB, TRI PLASTIC, 1" FITTING, 1/4 FNPT X 1/4 BARB SCREW, 1/4-20 X 1/2 SOCKET HEAD CAP NUT, HEX, NYL, CASTING, BASE, EZPR, COMP CASTING, SLIDE, EZPR, COMP CASTING, MTR MOUNT, EZPR, COMP KNOB, 3/8-16 X 3, EZPR KNOB, 1/4-20 X 2, EZPR SPRING, EXTEN,.250 X 1.0 X BRACKET, BRUSH MNT, EZPR ASSY, BRUSH, EZPR FITTING, 1/4 MNPT X LOC-LINE NOZZLE, LOC-LINE, 1/8"

6 EXPLODED VIEW & PARTS VIEW MK-EZ PROFILER ASSY, FRAME & TABLE PART # ITEM DESCRIPTION PART# OTY. 1 WASHER, FLAT, USS, 3/ SCREW, HEX, 3/8-16 X 3/ PLUG, PLASTIC, 1 SQ GA FRAME, EZ PROFILER TABLE, LEFT, EZPR, COMP TABLE, RIGHT, EZPR, COMP STRAP, TABLE, EZPR SCREW, HEX HD, 1/4-0 X 2-1/ ASST, FENCE, EZPR

7 EXPLODED VIEW MK-EZ PROFILER ASSY, FRAME & TABLE PART # ITEM DESCRIPTION PART# OTY. 1 SCREW, FLAT HEAD CAP #8-32 X 3/ FENCE, EZPR STRIP, DELRIN, 1/4 X 5/8 X 12, COMP

8 EXPLODED VIEW & PARTS VIEW MK-EZ PROFILER PAN PART # ITEM DESCRIPTION PART# OTY. 1 WASHER, FLAT, SAE, 1/ SCREW, HEX, HD, TAP, 1/4-20 X BUMPER, 1/4 HD, TAP, 1/4-20 X NUT, HEX, NYLK, 1/ WASHER, 1/4 RUBBER FENDER PAN, PLASTIC, EZPR

9 NOTES 31

10 ACCESSORIES MK Diamond Profile Bits are designed to provide an initial shaping before the polishing process. They are for profiling tile, marble, granite and all types of stone with superior performance and durability. Engineered specifically for the EZ-Profiler these wet cutting profile bits have a 5/8" - 18 female thread. MK-400BDB Brazed Diamond Profile Bits These vacuum brazed diamond profile wheels provide a cost effective and efficient means for profiling marble, soft-granite, travertine and porcelain tile. Each wheel is designed for fast material removal and improved life providing a perfect profile. Each wheel has a rubber guide to protect the wheel from marring the material. Diameter Profile/Radius Diameter Nut Part # 3-1/2" A - 3/8" 3-1/2" 5/8" /2" A - 3/16" 3-1/2" 5/8" /2" B - 1/2" 3-1/2" 5/8" " C - 3/4" 4" 5/8" " E - 45 Bevel 4" 5/8" MK-480SDR Segmented Diamond Profile Bits The segmented design provides aggressive shaping and longer life. The design of the profile bit allows fast, even removal rates with minimal effort. Shape Profile/Size Diameter Nut Part # Half Bullnose B-10mm 3-1/2" 5/8" Half Bullnose B-15mm 3-3/4" 5/8" Half Bullnose B-20mm 3-3/4" 5/8" Ogee F-20mm 3-1/2" 5/8" A B C E F 32

11 NOTES 33

12 ORDERING & RETURN INSTRUCTIONS ORDERING INFORMATION You may order MK Diamond products through your local MK Diamond distributor or, you may order direct from MK Diamond. When ordering direct from MK Diamond, please have the following information ready before calling: The Model Number of the saw The Serial Number of the saw Where the saw was purchased and when The Part Number for the part(s) being ordered The Part Description for the part(s) being ordered NOTE: Standard orders are $50.00 or more when ordering direct from MK Diamond. A $6.00 charge will be added to orders having a net billing value under $ A nominal handling fee of $5.00 may apply to some orders. All parts may be ordered by calling toll free to or and asking for Customer Service. For technical questions, call RETURN MATERIALS POLICY To expedite the service relative to the return of a product purchased through MK Diamond, please observe the following: NOTE: When returning all items, they must have been purchased within the previous twelve (12) months. Have the Model Number of the saw Have the Serial Number of the saw Have the location of where the saw was purchased Have the date when the saw was purchased Contact Customer Service for approval to return the item(s) Obtain a Returned Goods Number (RGA) authorizing the return Follow the packaging instructions in the following section Ensure the RGA number is on the outside of the returned package Ensure your item(s) are prepaid to the destination For returned items, call toll free to or and ask for Customer Service. PACKAGING INSTRUCTIONS Remove the Cutting Head Dry the equipment before shipping When packing, include the following: Profiler, Diamond Tool and Frame Assembly Package the unit in its original container or one of comparable size (do not ship the unit partially exposed) Ensure all parts are secured in the packaging to prevent moving AUTHORIZED SERVICE CENTERS For quicker repair time, you may contact MK Diamond Customer Service, toll free, at or for the Authorized Service Center closest too you or visit our web site at For technical questions, call

13 ORDERING & RETURN INSTRUCTIONS CONTACT: Please contact MK Diamond Products, Inc. Customer Service Department with any questions you might have regarding distributors, parts or service. Telephone: (800) Fax: (310) Customer Service Hours: Monday through Friday, 6AM-4PM PST MK Diamond Products, Inc Storm Parkway Torrance, CA MK DIAMOND PRODUCTS, INC. LIMITED WARRANTY MK DIAMOND PRODUCTS, INC. will guarantee every machine they build, to be free from defects in material and workmanship for (1) one year from date of purchase. The obligation of MK DIAMOND PRODUCTS, INC. under this warranty is limited to the repair or replacement of any parts which, under normal use, prove to be defective in material or workmanship. The parts involved or the unit in question should be returned to MK DIAMOND PRODUCTS, INC. or to a point designated by us, transportation prepaid. This warranty does not obligate us to bear the cost of labor or transportation charges in connection with replacement or repair of defective parts. Likewise, it shall NOT apply to any unit which has been subjected to misuse, neglect or accident. This warranty does NOT apply to any machine which has been repaired or altered outside our factory. This warranty does NOT obligate MK DIAMOND PRODUCTS, INC., with respect to items not of our manufacture, such as engines, motors, hydraulics, etc., which are subject to their own guarantees and warranties. We shall in no event be liable for consequential damages or contingent liabilities arising out of failure of any equipment or parts to operate properly. COPYRIGHT 2018, MK DIAMOND PRODUCTS, INC. ALL RIGHTS RESERVED. The MK Diamond logo is a registered trademark of MK Diamond Products, Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property of their respective owners and used with permission. MK Diamond may have patents, patent applications, trade marks, copyrights of other intellectual property right covering this product in this document. This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold. The information and specifications included in this publication were in effect at the time of approval for printing. 35

14 OWNER'S MANUAL, PARTS LIST & OPERATING INSTRUCTIONS MK Diamond Products, Inc Storm Parkway Torrance, CA Toll-Free: (800) Phone: (310) Fax: (310)