Architectural Trim & Moldings
|
|
- Clement Montgomery
- 5 years ago
- Views:
Transcription
1 Architectural Trim & Moldings Often, it s the subtle touches that make the biggest impact. With Stylmark s TrimMaker, you can easily add accent to walls, ceilings, soffits and columns to provide a smooth transition between planes. Installation is simple. Just secure the base and snap the trim into place. TrimMaker is available in hundreds of shapes, colors and finish combinations. You can also group shapes to create your own look or work with our engineers to design a shape that s perfect for your unique application. Curving 2 Endcaps 3 Base Installation Options 4 Quarter Rounds 6 Half Rounds 8 Rectangulars 11 Special Shapes 14 Bases 16 Plastic Base Clips & Adapters 18
2 Curving Bring it all together with a few carefully placed curves. Stylmark is able to curve virtually all of our products to meet your radius requirements. Simply provide us with dimensions as indicated below and watch your design come to life! (S) (L) CHORD (C) (IR) (IR) EXAMPLE Required Information: Trim Maker part number Orientation of part to be curved Radius (IR) Arc Length (S) Chord (c) or Included Angle (α) Straight Length (L) Notes: Customer templates are not required Provide AutoCAD or SolidWorks drawing if available For architectural trim applications, mount plates may need to be sectioned to accommodate the radius The maximum amount of usable material per 12 length after curving is Stylmark Architectural Trim and Moldings
3 Metal, Light & Color Endcaps TrimMaker is easy to order. Simply select the trim shape and accompanying base that best fits your requirements. Next calculate the amount of material you need (overall length) and determine the number of 12 stock lengths required. When your application of TrimMaker leaves an outside edge exposed, endcaps may be inserted to give the trim a more finished appearance. Most shapes have a matching left hand and right hand endcap available. Endcaps are designed to install by sliding their tabs into the base or by siliconing the endcap to the end of the trim. TRIM ENDCAPS MATCHES TRIM SHAPE BASE Stylmark Architectural Trim and Moldings 3
4 Base Options Stylmark offers three base options for securing aluminum extrusions to their surfaces. Each options is designed to accommodate different tolerances of aluminum & wall conditions. Option One: Stylmark s standard aluminum base that secures to the wall and the aluminum extrusion is pressed onto the base. Option Two: Plastic base clips that are secured to the wall and the aluminum extrusion is pressed onto the clips. This option is ideal for extrusions that have an inch or less opening. Stylmark recommends a minimum of five base clips per 12ft extrusion. Option Three: This options utilizes a smaller base profile than extrusion opening with a plastic adaptor that allows for easy alignment with the benefit of a plastic adaptor. OPTION ONE: STANDARD ALUMINUM BASE STEP 1: Ensure the mounting suface is flat and level. Mount the necessary length of the base in the desired location by driving fasteners through pre-punched mounting holes. STEP 2: Align the TrimMaker extrusion to the catch rails of the base and press it into the base. 4 Stylmark Architectural Trim and Moldings
5 Metal, Light & Color Base Options OPTION TWO: PLASTIC BASE CLIPS STEP 1: Ensure the mounting surface is flat and level. Mark reference line for plastic base clips. Place plastic base clip in correct location by driving fasteners through pre-punched mounting holes. STEP 2: Align the TrimMaker extrusion to the catch rails of the plastic base clip and press it into the base. OPTION THREE: ALUMINUM BASE WITH PLASTIC CLIP ADAPTOR STEP 1: Ensure the mounting suface is flat and level. Mount the necessary length of the base in the desired location by driving fasteners through pre-punched mounting holes. STEP 2: Attach plastic clip adaptor to base. Stylmark recommends 5 plastic clip adaptors per 12ft extrusion - a minimum of one at each end and 2-3 in even increments. STEP 3: Align the TrimMaker extrusion to the catch rails of the plastic adaptor and press it into the base Stylmark Architectural Trim and Moldings 5
6 Quarter Rounds OPENING RADIUS PART # RADIUS OPENING ALUMINUM BASE NUMBER(S) PLASTIC BASE CLIPS BASE & ADAPTOR COMBO ENDCAP RH ENDCAP LH /4 5/ /4 11/ /2" 1" * * 2-1/2 2" & & & & Notes: * Special order only - See following pages for specific profile information. 6 Stylmark Architectural Trim and Moldings
7 Metal, Light & Color Quarter Rounds Part # Part # Part # /4 1-1/ 5/8 11/16 1-1/4 1-1/2 Aluminum Base: Plastic Base Clips: (red) Endcaps: RH , LH Aluminun Base: Endcaps: RH , LH Plastic Base Clips: (black) Endcaps: RH , LH Part # * Part # * Part # / 2 2-1/2 3 Plastic Base Clips: (black) Endcaps: RH , LH Base & Adaptor Combo: & (Green) Endcaps: RH , LH Base & Adaptor Combo: & (Green) Endcaps: RH , LH Notes: * Special order only. = finished surface Stylmark Architectural Trim and Moldings 7
8 Half Rounds OPENING RADIUS DIAMETER PART # RADIUS DIAMETER OPENING ALUMINUM BASE NUMBER(S) PLASTIC BASE CLIPS BASE & ADAPTOR COMBO ENDCAP # /8 3/4 5/ /2 1 5/ /8 1-1/4 11/ or /4 1-1/ or or ** * 1-1/4 2-1/ / / & & & & & & & Notes: * Special order only - See following pages for specific profile information ** Part # has a 3/4 return 8 Stylmark Architectural Trim and Moldings
9 Metal, Light & Color Half Round Part # Part # Part # /8 3/8 5/8 1/ 11/16 5/8 1-1/4 1-1/8 Aluminum Base: Plastic Base Clips: (Red) Base & Adaptor Combo: n/a Endcaps: Aluminum Base: Plastic Base Clips: (Red) Base & Adaptor Combo: n/a Endcaps: Aluminum Base: or Base & Adaptor Combo: n/a Endcaps: n/a Part # Part # Part # ** 7/16 1-1/ Aluminum Base: or (Recessed) Endcaps: or (Recessed) Endcaps: Part # * Part # Endcaps: /4 2-1/ 1-1/ Base & Adaptor Combo: & (Green) Endcaps: Base & Adaptor Combo: & (Green) Endcaps: Notes: * Special order only. ** Part # has a 3/4 return = finished surface Stylmark Architectural Trim and Moldings 9
10 Half Rounds Part # Part # / 6 Aluminum Base: Base & Adaptor Combo: & (Yellow) Endcaps: Aluminum Base: Base & Adaptor Combo: & (Orange) Endcaps: = finished surface 10 Stylmark Architectural Trim and Moldings
11 Metal, Light & Color Rectangulars OPENING A B PART # A B OPENING ALUMINUM BASE NUMBER(S) PLASTIC BASE CLIPS BASE & ADAPTOR COMBO ENDCAP # /4 3/4 5/ /4 3/16 21/ /2 5/ /8 21/ or /2 1/ or * (scalloped surface) 1-1/2 1/ or & & & / or or & /4 1/2 1" or / ** 3 1-1/ / /4 4-1/ /4 4-1/ & & & & & & Notes: * Part# has a scalloped on the 1-1/2 surface **Special order only - See following pages for specific profile information Stylmark Architectural Trim and Moldings 11
12 Rectangulars Part # Part # Part # /8 21/3 13/64 5/8 1/ Aluminum Base: Plastic Base Clips: (Red) Base & Adaptor Combo: n/a Endcaps: Aluminum Base: Plastic Base Clips: (Grey) Base & Adaptor Combo: n/a Endcaps: n/a Aluminum Base: Plastic Base Clips: (Red) Base & Adaptor Combo: n/a Endcaps: n/a Part # Part # Part # * (scalloped on surface) 1-3/8 1-1/ 1-1/ 21/64 1/ 1/ or (recessed) Base & Adaptor Combo: & (Blue) Endcaps: or (recessed) Base & Adaptor Combo: & (Blue) Endcaps: or (recessed) Base & Adaptor Combo: & (Blue) Endcaps: Part # Part # Part # /8 2-1/4 1/ or (recessed) Base & Adaptor Combo: n/a Endcaps: or (recessed) Base & Adaptor Combo: & (green) Endcaps: or (recessed) Base & Adaptor Combo: n/a Endcaps: Notes: * Part# has a scalloped on the 1-1/2 surface = finished surface 12 Stylmark Architectural Trim and Moldings
13 Metal, Light & Color Rectangulars Part # Part # ** Part # / Base & Adaptor Combo: & (Green) Endcaps: Base & Adaptor Combo: & (Green) Endcaps: Aluminum Base: Base & Adaptor Combo: & (Yellow) Endcaps: Part # Part # Part # / 6 4-1/ Aluminum Base: Base & Adaptor Combo: & (Yellow) Endcaps: Aluminum Base: Base & Adaptor Combo: & (Orange) Endcaps: Aluminum Base: Base & Adaptor Combo: & (Orange) Endcaps: = finished surface Notes: ** Special order only Stylmark Architectural Trim and Moldings 13
14 Special Shapes Part # Part # * Part # * 2 1/ 1 1/ /16 1 3/ /8 1/ 1 3/8 Aluminum Base: Base & Adaptor Combo: & (Yellow) Endcaps: RH , LH Plastic Base Clips: (black) Endcaps: Aluminum Base: Base & Adaptor Combo: & (Yellow) Endcaps: RH , LH Part # Part # Part # * 1 1/ 4 1/ 1/ 2 7/8 R 3/8 1/4 Aluminum Base: Base & Adaptor Combo: & (Yellow) Endcaps: RH , LH Base & Adaptor Combo: & (Green) Endcaps: Endcaps: RH , LH Part # * Part # * Part # /8 1/ 2-5/8 Endcaps: RH , LH Base & Adaptor Combo: & (Green) Endcaps: Base & Adaptor Combo: & (Green) Endcaps: RH , LH Notes: * Special order only. = finished surface 14 Stylmark Architectural Trim and Moldings
15 Metal, Light & Color Special Shapes Part # Part # * Part # / 1/ 5/8 2-3/16 Base & Adaptor Combo: & (Green) Endcaps: RH , LH Endcaps: Endcaps: RH , LH Part # Part # * Part # * 1-1/ 1/ 1-1/ 1- Endcaps: RH , LH Base & Adaptor Combo: & (Green) Endcaps: RH , LH Endcaps: n/a Part # Part # Part # /4 1/4 1/ R 2 4-1/ 5-1-1/4 1-1/ 1-7/8 2-3/8 Aluminum Base: Base & Adaptor Combo: & (Orange) Endcaps: RH , LH Aluminum Base: Base & Adaptor Combo: n/a Endcaps: n/a Notes: * Special order only. = finished surface Stylmark Architectural Trim and Moldings 15
16 Bases Part # Part # Part # Trim Shape /16 3-3/16 1/4 1/4 Base Part # Part # Part # /16 1/4 13/16 1/4 2-3/16 1/4 3/8 Part # Part # /64 3-3/16 1/4 3/16 1/4 1/ 13/3 = finished surface 16 Stylmark Architectural Trim and Moldings
17 Metal, Light & Color Bases Part # Part # /8 13/ /16 9/16 Part # Part # /16 1/8 3-3/3 = finished surface Stylmark Architectural Trim and Moldings 17
18 Plastic Base Clips Part # (Black) (For 1 openings) Part # (Grey) (For 5/8 openings) Part # (Red) (For 5/8 base lobe openings) Plastic Base Adapters Part # (Green) (For 2 openings) Part # (Yellow) (For 3 openings) Part # (Orange) (For 4.5 openings) Part # (Blue) (For 1 openings) Part # (Grey) (For 5/8 openings) Part # (Red) (For 5/8 base lobe openings) = finished surface 18 Stylmark Architectural Trim and Moldings Rev A (1/2019)
Architectural Trim & Moldings
Architectural Trim & Moldings Often, it s the subtle touches that make the biggest impact. With Stylmark s TrimMaker, you can easily add accent to walls, ceilings, soffits and columns, or provide a smooth
More informationHardware & Accessories
Hardware & Accessories Assure that your installations and designs are completed in professional fashion by utilizing Stylmark s Hardware and Accessories. This catalog represents a collection of these items,
More informationShelving. Power Track Light Shelves 2 Shelf Edge 4 Shelf Standards & Brackets 5 Flexis DisplayMaker Shelving 8
Shelving Stylmark s shelving products have clean lines that provide an attractive accent to any area. Constructed of aluminum or stainless steel, these elegant framed shelves are available with or without
More informationAutodesk Inventor 6 Essentials Instructor Guide Chapter Four: Creating Placed Features Chapter Outline This chapter provides instruction on the follow
Chapter Four: Creating Placed Features Chapter Outline This chapter provides instruction on the following topics and provides exercises for students to practice their skills. Day Two Topic: How to create
More informationINSTALLATION INSTRUCTIONS
Design and Assembly Envisor components are designed to function as an Equipment Screening System. Modular by Design allows for a more user-friendly installation. This instruction packet is intended to
More informationModule 5: Creating Sheet Metal Transition Piece Between a Square Tube and a Rectangular Tube with Triangulation
1 Module 5: Creating Sheet Metal Transition Piece Between a Square Tube and a Rectangular Tube with Triangulation In Module 5, we will learn how to create a 3D folded model of a sheet metal transition
More informationDL-FLEX- CHANNEL FEATURE MATRIX SUGGESTED MOUNTING TECHNIQUES. Type. Project CHANNELS FOR DL-FLEX SERIES MOUNTING CHANNELS. Catalog No.
CHANNEL FEATURE MATRIX ROUGH-IN MEDIUM DEPTH PROFILE SMALL DEPTH PROFILE BASIC CH-RI-11 CH-RI-12 CH-RI-13 CH-RI-14 CH-ME-21 DL-FLEX-UP DL-FLEX-HO DL-FLEX-UP-ULTRA DL-FLEX-HD DL-FLEX-UP-RGB DL-FLEX-UP-CTA
More informationAP-120 Series AP Mounting Kit
AP-120 Series AP Mounting Kit Installation Guide The AP-120 series mounting kit provides additional mounting options for the AP-120 series wireless access points. The mounting kit includes the following
More informationInventor 201. Work Planes, Features & Constraints: Advanced part features and constraints
Work Planes, Features & Constraints: 1. Select the Work Plane feature tool, move the cursor to the rim of the base so that inside and outside edges are highlighted and click once on the bottom rim of the
More informationME 120: Impeller Model in Solidworks 1/6
ME 120: Impeller Model in Solidworks 1/6 Steps to Draw Pump Impeller: The steps below show one way to draw the impeller. You should make sure that your impeller is not larger than the one shown or it may
More informationSolid Modeling: Part 1
Solid Modeling: Part 1 Basics of Revolving, Extruding, and Boolean Operations Revolving Exercise: Stepped Shaft Start AutoCAD and use the solid.dwt template file to create a new drawing. Create the top
More informationSolidWorks Intro Part 1b
SolidWorks Intro Part 1b Dave Touretzky and Susan Finger 1. Create a new part We ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select File New Templates IPSpart If the SolidWorks
More informationTV & Office Solutions by equip solutions with a high value of benefit
TV & Office Solutions by equip solutions with a high value of benefit The brand equip stands for a product development driven by quality management and continuous adjustments to the requirements of the
More informationVTube-LASER Quick Start Guide for FARO QUANTUM from a Traditional Tube Print
VTube-LASER Quick Start Guide for FARO QUANTUM from a Traditional Tube Print This guide shows how to setup VTube-LASER from a tube print and then measure and qualify demo tube 4 using a FARO ScanArm. A
More informationInstallation and Set-up of Dome Camera Wall Arm (Zxx-WM2A)
Installation and Set-up of Dome Camera Wall Arm (Zxx-WM2A) The dome camera wall arm mount is designed to provide a sturdy and aesthetic mounting option for the GANZ ZC-5000, ZC-8000 and ZN-DTxMA series
More informationAutodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies
Autodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies Tim Varner - 2004 The Inventor User Interface Command Panel Lists the commands that are currently
More informationComplex Shapes Creation with Hybrid Modelling
Complex Shapes Creation with Hybrid Modelling Peter De Strijker Technical Sales Executive MFG - Benelux Our Customer s Industries Discrete product manufacture Agenda Quality Analyses of sketches and surfaces
More informationHow to Create a Fountain Pen
How to Create a Fountain Pen Lesson 4 How to Create a Fountain Pen This lesson will guide you in building a fountain pen. You will use the following tools: NURBS curves. Extrusion. Mirror. Trim. Blend
More informationone pulse per 360 degree rotation accuracy 0.25 degrees
date 07/18/2014 page 1 of 8 SERIES: AMT10 DESCRIPTION: MODULAR INCREMENTAL ENCODER FEATURES patented capacitive ASIC technology low power consumption CMOS outputs 16 DIP switch selectable resolutions index
More informationStrategy. Using Strategy 1
Strategy Using Strategy 1 Scan Path / Strategy It is important to visualize the scan path you want for a feature before you begin taking points on your part. You want to try to place your points in a way
More informationRGB SkyLine Rigid Border Tubing Installation Instructions
RGB SkyLine Rigid Border Tubing Installation Instructions Project Planning and Preparation(s) What you will need for parts and pieces... XXX XX Step One: Take a lineal measurement of the overall length
More informationSolidWorks 2½D Parts
SolidWorks 2½D Parts IDeATe Laser Micro Part 1b Dave Touretzky and Susan Finger 1. Create a new part In this lab, you ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select
More informationKwikmark Windows Software Suite
Kwikmark Windows Software Suite Features & Highlights Dozens of Enhanced Functions Cloning is one of the many time saving and machine streamlining features that are included in the kwikpro control package
More informationMounting Accessory Guide
Apr. 12 2010 Table of Contents Mounting Accessory Guide 1 Overview 5 Introduction... 5 Types of Mounting Methods... 5 Surface... 5 Wall... 5 L-Type Wall Mount (PMAX-0308) 6 Heavy Duty Wall Mounts (PMAX-0305
More informationIS-DM220/IR/HB IS-DM220
IS-DM220/IR/HB IS-DM220 Installation Guide Indoor/Outdoor Ver. 1.2 00P6NX223ZXSEA2 Table of Contents 1. Indoor Camera Installation... 3 1.1 Hard Ceiling... 3 1.2 In-Ceiling (T-Bar) Mounting... 13 1.3 4S
More informationWhisperTrac 3000 installation guide
WhisperTrac 3000 installation guide Table of contents WhisperTrac Installation Guide Elements of the WhisperTrac system.................................................... 3 Section 1: Mounting Mounting
More informationTUTORIAL 2. OBJECTIVE: Use SolidWorks/COSMOS to model and analyze a cattle gate bracket that is subjected to a force of 100,000 lbs.
TUTORIAL 2 OBJECTIVE: Use SolidWorks/COSMOS to model and analyze a cattle gate bracket that is subjected to a force of 100,000 lbs. GETTING STARTED: 1. Open the SolidWorks program. 2. Open a new part file.
More informationMacBook Core 2 Duo Clutch Cover
MacBook Core 2 Duo Clutch Cover Replacement Replace the clutch cover on your MacBook Core 2 Duo. Written By: Ben Eisenman ifixit CC BY-NC-SA www.ifixit.com Page 1 of 29 INTRODUCTION Replace the curved
More informationBELLOWS COVERS AND.
BELLOWS AND COVERS www.joycedayton.com BELLOWS AND COVERS REDUCE EXPENSIVE MAINTENANCE AND DOWN TIME Protect your Equipment Investment When bellows and covers are fitted to machinery, expensive maintenance
More informationFormulate 20 x 20 Island Exhibit - Kit 10
Formulate 20 x 20 Island Exhibit - Kit 10 CFAB-K-10 Formulate Fusion provides an unparalleled dynamic that elevates and accentuates a message and brand, but also maximizes the return on tradeshow investment.
More informationTDM To MiniMech conversion ProceDure
TDM To MiniMech conversion ProceDure (Model 9100 ATM) TDN 07102-00079 Apr 1 2009 CorporATe HeAdquArTers: 522 E. Railroad Street Long Beach, MS 39560 PHONE: (228) 868-1317 FAX: (228) 868-0437 COPYRIGHT
More informationKM6-II Subracks. APW Electronic Solutions. 152 APW Electronic Solutions Toll Free (800) Fax: (858)
KM6-II Subracks Fully compatible with DIN41494 part 5 and IEC60297-3. KM6-II Standard is available in kit form, offering quick and simple assembly. KM6-II Universal is a highly versatile subrack system,
More informationPixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com S: 96.524.8242 CAN: 59.885.5775 Product Diversity
More informationPixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 96.524.8242 CAN: 59.885.5775 Product Diversity
More informationAddendum to the Actalyst Interactive Digital Signage Installation and User s Guide
Addendum to the Actalyst Interactive Digital Signage Installation and User s Guide This addendum contains information about the Actalyst Interactive Overlay that has changed since the release of the Actalyst
More informationVisualMILL Getting Started Guide
VisualMILL Getting Started Guide Welcome to VisualMILL Getting Started Guide... 4 About this Guide... 4 Where to go for more help... 4 Tutorial 1: Machining a Gasket... 5 Introduction... 6 Preparing the
More informationSection 1 Specialty Profiles
Contents Basic Series 17-31 Section 1 Basic & Specialty Specialty 32x18 Frame 45-46 & End Caps 30 Series 32-35 Door Rolling Door Guide 47 Sliding Door Guide 48 28 Series 36- Panel Stiffener/Handle 49 Panel
More informationASSEMBLY AND ADJUSTMENT
EDGE-WALL MONITOR ARM EDGE-WALL Rev A 2/17 Model EDGE-WALL-SLV ASSEMBLY AND ADJUSTMENT EDGE-WALL MONITOR ARM PLEASE REVIEW these instructions before beginning the installation. Check that all parts and
More informationModeling a Gear Standard Tools, Surface Tools Solid Tool View, Trackball, Show-Hide Snaps Window 1-1
Modeling a Gear This tutorial describes how to create a toothed gear. It combines using wireframe, solid, and surface modeling together to create a part. The model was created in standard units. To begin,
More informationand see how good you look! Dress it with a SIMCO housing 2004 PRODUCT SELECTION GUIDE FOR PLASTIC ENCLOSURES Handheld Cases Pocket Size Enclosures
Pocket Size Enclosures Handheld Cases Desktop Housings Utility Boxes Dress it with a SIMCO housing and see how good you look! 2004 PRODUCT SELECTION GUIDE FOR PLASTIC ENCLOSURES PRECISION ENCLOSURES TO
More informationGV-EL124S Electric Strike
GV-EL124S Electric Strike Featured with a built-in door status sensor, the GV-EL124S is a fail-secure electric strike, but it is field convertible from fail secure to fail safe. It can be mounted either
More informationExercise Guide. Published: August MecSoft Corpotation
VisualCAD Exercise Guide Published: August 2018 MecSoft Corpotation Copyright 1998-2018 VisualCAD 2018 Exercise Guide by Mecsoft Corporation User Notes: Contents 2 Table of Contents About this Guide 4
More informationTV Brackets by equip The perfect solution to securely mount your TV
TV Brackets by equip The perfect solution to securely mount your TV No matter what s the size, if you want your TV in a fix position or want it to tilt, we have the solution you re been looking for. intro
More informationDEFLECTION AND TWIST MEASUREMENT SYSTEM (DTMS) Model 47
Features DEFLECTION AND TWIST MEASUREMENT SYSTEM (DTMS) Model 47 Results are not affected by the motion or acceleration of the structure being tested Three or five degrees of freedom are measured between
More informationSetup Information Panosaurus May 3, 2011
Setup Information Panosaurus 2.0 www.gregwired.com May 3, 2011 Please take the time to read all of the setup information to ensure success and ease of use of this tripod head. Much of the setup is a one
More informationSwitches and Indicators 84
Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories
More informationwire guards PLAST D FUSERS FLUORESCENT LIGHTING FIXTURE PROTECTION Wire Guards / Fluorescent lighting fixture protection / Product Description:
Wire Guards FLUORESCENT LIGHTING FIXTURE PROTECTION Wire Guard units offer an inexpensive way to protect light fixtures from excessive abuse. Wire Guard units can be fabricated to fit most shapes of light
More informationPRODUCT SPECIFICATIONS Pillar Table
PROUT SPIITIONS Pillar March 2017 Worksurfaces Standard worksurface tops are nominal 1 1 / 4 overall thickness with.030 thick high-pressure laminate top surface and.028 phenolic backer (bottom surface).
More informationCONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Receptacle Kit and a Protective Cover Assembly.
Revised Sept-28-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Instructions CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Kit
More informationTOP SELLING MODEL. Classic swivel USB drive with silver clip. Available in 5 colors: white, orange (021), blue (286C), black and red (185C).
Custom USB Drives from a Canadian Memory distributor and manufacturer with over 15 years of experience in the computer industry. Free setup Free 1-2 color print or 1-location engrave Free upload of up
More informationM204SMB Surface Mount Box Instructions
Instruction Sheet 860337070 Issue 7, June 2013 M204SMB Surface Mount Box Instructions General The CommScope M204SMB surface mount box (SMB) is designed for interior surface-mounted applications and can
More informationMOLD DESIGN. Presented by: Nakul Singh, Tim Ralph, Jamie Curtis and Tim Winsor
MOLD DESIGN Presented by: Nakul Singh, Tim Ralph, Jamie Curtis and Tim Winsor Mold Design Three main components: (a) Core This duplicates the inner surface of the model. It is larger than the finished
More informationFootprints by K Framing Catalog
Footprints by K Framing Catalog Standard Frames Prints MUST be mounted on Foam Core or on a Canvas Stretcher Frame to be framed. Note: Foam Core Mounted prints include glare-free glass. Glass cannot be
More informationInstallation Guide. Room Temperature Sensors. Mounting. Location and Cover Removal (All) STE-6011 Only. STE-6010/6013/6015 Only
Room Temperature Sensors STE-6010/6011/6013/6015 Mounting Location and Cover Removal (All) Install the sensor on an inside wall where it can sense the average room temperature and be away from direct sunlight,
More informationFurther Information can be found at
Below is a step by step guide to assembling the Hurricane-Rig. Remember that this is a precision optical instrument. Excessive force can bend critical parts. If treated well it should give many years of
More informationParametric Piping Models. Naveed Anwar July 2003
Parametric Piping Models Naveed Anwar July 2003 The Idea Basic idea is to assign parametric objects to basic line or area objects in the SAP2000 model and then generate detailed mesh for each object, on-demand
More informationModular Series Mounting Solutions
At Peerless-AV, we understand that installers and integrators are continuously exposed to unique installation applications. One-size-fits-all mounts simply don t fit all real world applications. Our Modular
More informationWall-Mounted Sit-Stand Desk - Single Monitor
Wall-Mounted Sit-Stand Desk - Single Monitor Product ID: WALLSTS1 This wall-mounted sit-stand desk is perfect for areas that don t have enough space for a traditional sitstand desk. Its compact, wall-mounted
More informationBattery Holder. Chapter 9. Boat. A. Front Extrude. Step 1. Click File Menu > New, click Part and OK. SolidWorks 10 BATTERY HOLDER AA BOAT Page 9-1
Chapter 9 Boat Battery Holder A. Front Extrude. Step 1. Click File Menu > New, click Part and OK. AA Step 2. Click Front (plane) in the Feature Manager and click Sketch from the Content toolbar, Fig. 1.
More informationCreate a Rubber Duck. This tutorial shows you how to. Create simple surfaces. Rebuild a surface. Edit surface control points. Draw and project curves
Page 1 of 24 Create a Rubber Duck This exercise focuses on the free form, squishy aspect. Unlike the flashlight model, the exact size and placement of the objects is not critical. The overall form is the
More informationSM (SURFACE MOUNTED) WIREWAY: I SERIES
SM (SURFACE MOUNTED) WIREWAY: I SERIES DUPLEX POWER AND AV / TELECOM ANYWHERE The new Connectrac SM (Surface Mounted) Wireway installs directly onto any type of flooring. It s the industry s newest alternative
More informationSheet Metal Overview. Chapter. Chapter Objectives
Chapter 1 Sheet Metal Overview This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements of design,
More informationThis attractive raceway conceals and
Access 5000 Nonmetallic Surface Raceway System 5000 Two-Piece Multiple Channel Raceway This attractive raceway conceals and organizes electrical wiring and low-voltage cabling in a sleek, handsome molding.
More information120Ra-1 Pentium III Processor Installation Insert
120Ra-1 Pentium III Processor Installation Insert PN: 455-01614-000 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials,
More informationPhotocopiable/digital resources may only be copied by the purchasing institution on a single site and for their own use ZigZag Education, 2013
SketchUp Level of Difficulty Time Approximately 15 20 minutes Photocopiable/digital resources may only be copied by the purchasing institution on a single site and for their own use ZigZag Education, 2013
More informationChapter 16: Boat Hull - Loft and Sweep
This tutorial demonstrates classic boat hull lofting techniques using typical plan and profile curves. The classic hull shape is based on a design from an old Boat Builder s Handbook magazine. Many designs
More informationOpen Desktop WorkStation System Components Items Labeled in RED are ESD Sensitive
Page 1 of 21 Open Desktop WorkStation System Components Items Labeled in RED are ESD Sensitive Back Plane Pegasos IDE Cable Hard Drive Video Card G4 CPU IDE Cable CDROM Page 2 of 21 Remove top of case
More informationChapter 6: Create Surfaces from Curves
A common way of working in 3-D is to draw curves that represent edges, profiles, cross-sections, or other surface features and then to use surfacing commands to create surfaces from those curves. Edge
More informationWireframe Editing. DesignShop V9 Quick Reference Guide
Wireframe Editing DesignShop V9 Quick Reference Guide w w w. m e l c o u n i v e r s i t y. c o m DesignShop Wireframe Symbols Icons Straight Point (Non-Selected points display in blue) (Selected Points
More informationWIRE AND CABLE MANAGEMENT
Wire and Cable Management Solutions A variety of items are available for managing and organizing wire and cable in common systems and cabinet environments. From cable rack, auxiliary framing to network
More informationMPS-Lite. A range of Blank and Connectorized panels in 3 standard widths to fit a 2RU / 3.50 vertical space, plus Adapters to accommodate them.
MPS-Lite A range of Blank and Connectorized panels in 3 standard widths to fit a 2RU / 3.50 vertical space, plus Adapters to accommodate them. A size panel (0.90 x 3.50 ) + more B Size panels (1.80 x 3.50
More informationEND PANELS WIRE GRID END PANELS. Used on ends of Wall or Island sections End Panel hooks are reversible for left hand and right hand applications
END SOLUTIONS 133 END PANELS Used on ends of Wall or Island sections End Panel hooks are reversible for left hand and right hand applications Example Part # : EP 48 22 06 LAX 1. End Panel: EP 2. Uprite
More informationPFPDARM3 Product Illustration
PFPDARM3 Product Illustration page 1 of 15 PFPDARM3 Components & Fasteners 1x 1x 4x 4x 8x 4x 1 each TOOLS REQUIRED Phillips Screwdriver 1/2" Wrench 1/2" Socket Wrench 3/32" (2.38mm) 3/16" (4.76mm) 1/8"
More informationipod Classic Headphone Jack & Hold Switch Replacement
ipod Classic Headphone Jack & Hold Switch Replacement Replace Headphone Jack & Hold Switch to fix no audio and/or no unlock Written By: irobot ifixit CC BY-NC-SA www.ifixit.com Page 1 of 22 INTRODUCTION
More informationModel No LED Type LED Qty Color Per Pack Voltage Power (per
LED Type LED Qty Color Per Pack Voltage Power (per Test Data Length x Width mtr) 0.5mtr SMD3825 IP20 (limit 3 per customers, +$2 for add Qty) LSTR1-20-60C1 3000K Warm White 340lm 60pcs / M 5000x8mm DC12V
More informationrgb line voltage led strip light series
rgb line voltage led strip light series Model: LUm-B34XTS-XXX DMX CONTROLLABLE This high voltage LED Strip Light 120V and requires no transformers or drivers. The light source consists of 3,300 equally
More informationProperties of a Circle Diagram Source:
Properties of a Circle Diagram Source: http://www.ricksmath.com/circles.html Definitions: Circumference (c): The perimeter of a circle is called its circumference Diameter (d): Any straight line drawn
More informationAutodesk Inventor - Basics Tutorial Exercise 1
Autodesk Inventor - Basics Tutorial Exercise 1 Launch Inventor Professional 2015 1. Start a New part. Depending on how Inventor was installed, using this icon may get you an Inch or Metric file. To be
More informationMantraJet 1100 CD/DVD autoprinter Operator s manual
MantraJet 1100 CD/DVD autoprinter Operator s manual Rev 1.00 May 7, 2008 Table of contents 1. Specifications.. Page 2 2. Unpacking you MantraJet 1100 Page 3 3. Using your autoprinter for the first time.
More information2 PIECE BOARD-TO-BOARD
2 PIECE BOARD-TO-BOARD 201-01-123 1. SPECIFICATION DISTRIBUTION No restrictions for issue 2. SCOPE This specification contains the application notes for the 9159 two part connectors. 3. PRODUCTS 10-9159
More informationSPECS
Custom USB Drives from a Canadian Memory distributor and manufacturer with over 13 years of experience in the computer industry. Free setup Free 1-2 color print or 1-location engrave Free upload of up
More informationG12/G12x USER S MANUAL
G12/G12x USER S MANUAL TABLE OF CONTENTS SECTION 1 SLIDE CONFIGURATION SECTION 2 SLIDE CONFIGURATION ACCESSORIES SECTION 3 TABLETOP CONFIGURATION SECTION 4 TABLETOP CONFIGURATION ACCESSORIES SECTION 5
More informationAM-516. Adaptor Ring. User s Manual. Complies with FD8162 fixed dome camera. Rev IP Surveillance
AM-516 Adaptor Ring User s Manual Complies with FD8162 fixed dome camera Rev. 1.0 IP Surveillance I Overview AM-516 Adaptor Ring Adaptor ring for FD8162 fixed dome camera. The supported installation types
More informationInnovation Meets Illumination
Innovation Meets Illumination Equiline Economy Puck Pockit POINT LED 2.5 W, 12VDC 1W, 12VDC EquiLine Economy Puck Recess or Surface Mount 2-1/4 Recess hole 90 light spread Dimmable Works well with all
More information10 ModLite Minimal (Option 3) Trade Show Display Booth
This Display provides a modern, slick, and stylish appearance. The extrusion based exhibit features a NEW velcro-applied fabric graphic. Headers and wings are available in UV printed graphics or frosted
More informationCLAMPS & SUPPORTS CATALOG
ISO-900:2008 CLAMPS & SUPPORTS CATALOG Phone: 28 96 0900 Fax: 28 96 000 Email: sales@expotechusa.com Web: expotechusa.com 32 Cat. No. Page Cat. No. Page Cat. No. Page 07667... 6 03936... 2 038292... 0
More informationNPort S8000 Series Quick Installation Guide
NPort S8000 Series Quick Installation Guide Edition 6.0, March 2016 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778
More informationThis attractive raceway conceals and
5000 Two-Piece Multiple Channel Raceway Access 5000 Nonmetallic Surface Raceway System This attractive raceway conceals and organizes electrical wiring and low-voltage cabling in a sleek, handsome molding.
More informationRANGE SUMMARY OF RITEL PRODUCTS, AS SUPPLIED BY ELLMAX ELECTRONICS LTD., LONDON
Ellmax Electronics Ltd Unit 29 Leyton Business Centre Etloe Road, Leyton, London, E10 7BT Tel: 020 8539 0136 Fax: 020 8539 7746 Email: ellmaxelec@aol.com Web: www.ellmaxelec.com Ritel s range of quality
More informationSolid Bodies and Disjointed bodies
Solid Bodies and Disjointed bodies Generally speaking when modelling in Solid Works each Part file will contain single solid object. As you are modelling, each feature is merged or joined to the previous
More informationipod Classic Click Wheel Replacement Written By: irobot ifixit CC BY-NC-SA Page 1 of 25
ipod Classic Click Wheel Replacement Written By: irobot ifixit CC BY-NC-SA www.ifixit.com Page 1 of 25 INTRODUCTION The click wheel receives the feedback of your fingers and transmits it to the logic board.
More informationSNOWBOARD RACK KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 25
SNOWBOARD RACK KIT P/N 2881251 APPLICATION Pro Ride RMK 155 and 163, Axys RMK 155, 163, and 174 BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please
More informationK2 RIT-SPLIT LED Indicator Mod dated 18 October 2003 Circuit Design by: Wayne Burdick, N6KR Implementation by: Tom Hammond, NØSS
K2 RIT-SPLIT LED Indicator Mod dated 18 October 2003 Circuit Design by: Wayne Burdick, N6KR Implementation by: Tom Hammond, NØSS Show & Tell Pictorial Supplement to the K2 RIT-SPLIT LED Mod Documentation
More informationSECTION TAPER-LOC DRY GLAZE GLASS RAILING SYSTEMS. A. Monolithic Tempered Glass Dry Glazed Railing Assemblies.
1 SECTION 05 7310 TAPER-LOC DRY GLAZE GLASS RAILING SYSTEMS PART 1 GENERAL 1.1 SECTION INCLUDES A. Monolithic Tempered Glass Dry Glazed Railing Assemblies. 1.2 RELATED SECTIONS A. Section 05 5000 - Metal
More informationMacBook Core 2 Duo Optical Drive
MacBook Core 2 Duo Optical Drive Replacement Written By: Dozuki System 2017 guides.crucial.com Page 1 of 17 INTRODUCTION Upgrade or replace the combo or SuperDrive (requires a slim drive). TOOLS: Coin
More informationMiniature Inductive Prox TL-W
Miniature Inductive Prox Subminiature, Flat-Pack DC Sensor Fits Tight Spaces Watertight construction conforms to IP67 Space-saving mounting area, as small as 10 x 27 mm ( 0.39 x 1.06 in), is ideal for
More informationCatalog. Summer
Catalog Summer 2016 403-800-3044 customercare@utechnology.ca www.utechnology.ca Table of Contents Part A: Ceiling and Cabinet Lights MIKRA Cabinet Lighting 1 DISC DL-DIRECT 2 Part B: LED Flex Tape UNITI
More informationBuy Direct From The Manufacturer And Save!!!! 1
Vinyl Railing 2017 One stop shopping for all your Railing needs Use The Material The Professionals Use Vinyl Railing Services We Offer Boxed Railing Kits 36" Tall 4x4, 5x5 and 6x6 Railing Post Options
More informationFeature-Based Modeling and Optional Advanced Modeling. ENGR 1182 SolidWorks 05
Feature-Based Modeling and Optional Advanced Modeling ENGR 1182 SolidWorks 05 Today s Objectives Feature-Based Modeling (comprised of 2 sections as shown below) 1. Breaking it down into features Creating
More informationFormulate Accent - 04
Formulate Accent - 04 FMLT-WL04 Formulate accents enhance the funtionality of any 10ft or 20ft backwall and add more real estate for messaging too! With monitor supports, literature pockets, shelves, tables,
More information