This attractive raceway conceals and

Transcription

1 5000 Two-Piece Multiple Channel Raceway Access 5000 Nonmetallic Surface Raceway System This attractive raceway conceals and organizes electrical wiring and low-voltage cabling in a sleek, handsome molding. Access Raceway is divided and the low-profile device plates deliver combinations of power and communications cabling. Access 5000 Raceway System saves time and money because it installs faster and neater than conventional in-wall wiring. It is more energy efficient because walls, vapor barriers and insulation remain intact. And it s a snap to reconfigure or add new wiring/cabling to home or office. Access 5000 Raceway installed at chair rail height. Features & Benefits Low profile base mold design. Raceway can serve as an aesthetically pleasing molding which eliminates the need for additional finishing work. Dual channel raceway. Power and low-voltage can be run in same raceway. PVC and wood veneer finishes. Attractive finishes to blend with any decor. Modular device brackets and faceplates. New and emerging power or communications technologies can be adapted or updated without major construction to reduce overall life cycle costs. Made of durable PVC material. Lightweight and easy to cut. Meets UL flammability requirements and is UL Listed/CSA Approved for up to 600 volts. Patented safety interlock system on covers. Offers additional safety for home applications. Full line of fittings and accessories. Fittings snap onto base and overlap to cover seams for quick and easy installation. Eight-foot lengths. Installs quickly by one person with fewer joints to cover. Consult factory for custom lengths. Datacom connectivity options. Accepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point of use. Sold by: Toll Free: (877) ED285R6 Updated August 2001 For latest specs visit

2 Datacom Connectivity Options Now you have a wide range of options for providing datacom connectivity into Wiremold Cable Management Systems. They are: Ortronics TracJack and Series II Modular Connectivity Solutions Pass & Seymour Activate Modular Inserts Open System Communication Modules Use these icons to determine connectivity options for each Wiremold System component: NOTE: For more information on integrating connectivity into Wiremold Cable Management Systems contact the Wiremold Applications Engineering Team or your local Wiremold Sales Representative. Ortronics Connectivity TracJack Individual Jack System Front-loading, snap-in design supports future moves adds and changes Inserts for voice, data, audio, and video Available Category 3, 5e, 6, USOC 6-position, and other media Flat or angled 45 exit configurations Choice of 13 colors and color matched to Wiremold Systems Universal T568A/B wiring format Series II Front-Loading, Module System Module design features easy snap-in front-loading design Linear 110 punch down format for easy termination Inserts for voice, data, audio, and video Available Category 3, 5e, 6, USOC 6-position, and other media Available in flat or angled 45 exit configurations Color matched to Wiremold Systems For detailed product selection refer to the Ortronics Catalog or visit Pass & Seymour Network Wiring Activate Series Front-Loading Inserts Modular inserts for voice, data, audio and video applications Front-load, snap-in design Color and texture matched to Wiremold Systems Available Category 3, 5e, 6, as well as 6-position USOC Universal T568A/B wiring format For detailed product selection refer to the Pass & Seymour Network Wiring Catalog or visit Open Connectivity Solutions Wiremold Open System Communications Modules Accommodate a wide range of manufacturers communications outlets including keystone jacks, as well as proprietary solutions from Avaya (Lucent) and NORDX Modules insert into a wide range of Wiremold Systems Pre-punched faceplates accept common communication devices 2

3 Access 5000 Base & Cover 5000B 5" [127mm] Base An integral divider forms two channels for power and low-voltage separation. Base supplied in 8' [240m] lengths. Access Raceway in standard white vinyl and maple wood veneer, also available in black, gray vinyl, and fine oak wood veneer finishes. 5000C* Cover Covers supplied in 8' [240m] lengths. 5 1/4" [133mm] Access Raceway's Base, Cover, and Trim Cover are sold separately. 5000T* Quarter Round Trim Trim covers supplied in 8' [240m] lengths. 5005* Low-Voltage Blank Plate 1 1/2" Blanks entire low-voltage recess in device plate. 4 7/32" [107mm] 5007 Device Bracket For mounting standard devices. Snaps into top section of base wherever an outlet is needed. 1 1/8" [29mm] 5007C-1A* 9/16" [14.3mm] 3 11/16" [99mm] 6 3/8" [162mm] 5 3/16" [132mm] 2" [51mm] Access 5000 Raceway Fittings External Device Cover Plate For mounting one standard device and up to two voice/data connectors. Accepts 5507 Series Faceplates and Pass & Seymour Activate Keystone Jacks and Inserts. 5007C-2RT* 15/16" [23.8mm] 9/16" [14.3mm] 5 3/16" [132mm] Deep Device Plate For mounting deeper devices such as Sentrex surge protection and GFCI devices and Ortronics communications inserts. Accepts 5507 Series Faceplates, Tracjack and Series II Inserts Base Coupling For aligning 2 13/16" base sections. [71mm] 4 9/16" [116mm] 5006* Cover Clip Covers seam 5 13/32" [137mm] between butted cover sections. 5007C-2AB* Deep Device Plate For mounting deeper 9/16" [14.3mm] devices such as Sentrex surge 5 3/16" protection and GFCI [132mm] devices and Pass & Seymour Activate communications inserts. Accepts 5507 Series 15/16" Faceplates, 2A size Activate [23.8mm] inserts, and Open System Communication Modules. 3/4" [19.1mm] NOTE:* Add suffix WH for white finish, BK for black, and GY for gray. Add suffix W for maple finish or OA for oak. 3

4 5006A Internal Wire Guard 4 19/32" Protects inside wire/cables [117mm] from gap behind butted 1 1/2" cover sections. Installed 23/32" [18.3mm] when the 5006 Cover Clips are not used. 5010A* Entrance End Fitting Used to connect 5000 to 1/2" [12.7mm] or 3/4" [19.1mm] conduit. Has 3 9/16" [90mm] Overall Assembled Depth is 1 15/16" [49mm] one 1/2" [12.7mm] or 3/4" [19mm] concentric KO for each channel. 5010R* Right End Cap For closing open right end 5 29/32" of 5000 Base run. [150mm] 1 3/16" [30mm] 5 1/16" 5/16" [7.9mm] 5010L* Left End Cap For closing 5/16" [7.9mm] open left end of 5000 Base run. Access 5000 Raceway Fittings 5018C* External Cover Elbow For mounting cover and 5 1/4" [133mm] 2 1/2" [64mm] 5018WG 2700WC 2800WC 2900WC 1 1/2" 4 3/16" [106mm] 11/16" [17.5mm] 1 1/2" 3/4" [19.1mm] trim cover at 90 external corners. External Elbow Wire Guard Installs at a mitered external elbow joint behind the covers to protect from sharp objects being inserted. Not needed when 5018C external cover elbow is used. Wire Clips Holds and secures wiring and cabling inside raceway. Mounts with adhesive backing. 5 29/32" [150mm] 1 3/16" [30mm] 5017B 1 5/16" Internal Base Elbow [33mm] For mounting base at 90 internal corners. 5 5/16" 1 1/2" 1" 1 1/2" [35mm] 1 1/2" 5017C* 2 21/32" Internal Cover Elbow For [67mm] mounting cover and trim cover at 90 internal corners. 5 5/16" 1 5/8" [41mm] 5017WG 4 3/4" [121mm] Internal Elbow Wire Guard Protects wiring at mitered internal cover; snaps into 5017B Base Elbow. Not needed when 5017C internal cover elbow is used. A full line of molded fittings are available. 5018B External Base Elbow 7/8" For mounting base at 90 [22.2mm] 1" external corners. [35mm] 5 1/16" NOTE:*Add suffix WH for White Finish, BK for Black, and GY for Gray. 4

5 55007AD Modular Furniture 55007AD-G Adapter For mounting Activate modular furniture bezel, and other modular furniture adapters. 5507B Blank Faceplate For 5507B-G covering unused compartments in the device bracket. 5507D Duplex Faceplate 5507D-G For covering duplex style devices. Accepts 106 Frame. Access 5000 Face Plates 5507RJ 5507RJ-G Dual RJ11/RJ45 Connector Faceplate For mounting one or two RJ type connectors has one opening and a KO for the other. RJ11/RJ45 and 5507RJI 5507RJI-G IBM Faceplate For mounting one RJ and one IBM type connector. 5507SW Switch Faceplate 5507SW-G For covering standard toggle switches. 5507R Rectangular Faceplate 5507R-G For covering rectangular style devices. 5507FRJ Flush Dual RJ11/ 5507FRJ-G RJ45 Faceplate For flush mounting one or two RJ type connectors has one opening and a KO for the other. 5507T1 5507T1-G 5507T2 5507T2-G Single Receptacle Faceplate For covering single receptacles 1.59" [40mm] diameter. Single Receptacle Faceplate For covering single receptacles 1.41" [35mm] diameter. NOTE: All faceplates are 4 1/4" x 1 7/8" [108mm x 47mm] S2 Ortronics Faceplate For mounting Ortronics datacom inserts. Accepts two Series II Devices. Adding or relocating an outlet is easy with Access 5000 Raceway. Wire clips support cables without obstructing access to wiring. 5

6 ACCESS 5000 RACEWAY WIRE CAPACITIES FOR POWER/TOP COMPARTMENT WIRE SIZE THHN, THWN 10 AWG AWG AWG 24 Without Device Plate.96" [24mm].74" [19mm] ACCESS 5000 RACEWAY CABLE FILL CAPACITIES FOR DATA/COMMUNICATION CABLE/WIRE SIZE O.D. Bottom Compartment Top Compartment Inches [mm] 20% Fill 40% Fill 20% Fill 40%Fill UNSHIELDED 4-pair, 24 AWG Cat 5 UTP TWISTED PAIR 4-pair, 24 AWG Cat 3 UTP TELEPHONE 2-pair, 24 AWG pair, 24 AWG pair, 24 AWG pair, 24 AWG COAXIAL RG58/U RG59/U RG62/U RG6/U TWINAXIAL 100 Ohm SHIELDED TYPE TWISTED PAIR TYPE TYPE FIBER OPTIC Two Strand (Duplex) Multimode, 62.5/125 µm * 20% cable fill is calculated to approximate reduction in cable capacity due to connectors mounted within raceway and fittings that may restrict cross sectional area. ** 40% cable fill is the maximum designed cable fill based on a proposal revision to TIA/EIA-569-A. 5.78" [147mm] 5.14" [131mm] 2.77" [70mm] 2.01" [51mm] 5.05" [128mm] ACCESS 5000 RACEWAY SYSTEM PRODUCT APPLICATIONS D A E B C F G A 5010A Entrance End Feed B 5007C-2A Deep Device Bracket C 2A Activate Connectivity Insert D 5017B, 5017C Internal Base Elbow, Internal Cover Elbow Back Feed Position E 5007C-1A Device Bracket F 5010R Right End Cap G 5010L Left End Cap H 5018B, 5018C External Base Elbow, External Cover Elbow H NOTE: Illustration is for showing product applications only. 6

7 Notes Sold by: Toll Free: (877) The Wiremold Company U.S. and International: 60 Woodlawn Street West Hartford, CT Outside U.S FAX In Canada: 850 Gartshore Street Fergus, Ontario N1M 2W FAX Copyright 2001 The Wiremold Company All Rights Reserved ED285R6 Updated August 2001 for latest specs visit