01 TitU1+U4.fm Seite 1 Freitag, 7. Mai :43 15

Transcription

1 01 TitU1+U4.fm Seite 1 Freitag, 7. Mai :43 15

2 #HMC QRG DIS.book Seite 1 Freitag, 7. Mai :43 15 LOOKING FOR MORE INFORMATION This Quick Reference Guide does not replace the User s Manual. If you require additional information or are unsure of a specific issue, please refer to the User s Manual. The asterisk * identifies optional equipment. Functional introduction System overview System components Menu system Bottom status line Main menu, content area and Options menu Basic functions Audio settings FM and AM mode HD Radio (TM) information Switching to FM/AM mode and switching bands Tuning to stations Storing stations XM Satellite Radio mode XM Satellite Radio information Switching to XM Satellite Radio mode Tuning to channels Storing channels DISC mode Loading/ejecting a disc Opening the DISC main menu Audio disc playback Video DVD/CD playback Table of contents AUX mode Connecting an AUX device Supported signal sources AUX main menu ipod playback USB playback ipod and USB playback functions.. 18 AUX source playback PHONE Pairing a mobile phone Connecting a mobile phone Device list and pairing/connection status Calling functions Navigation XM NavTraffic information Navigation main menu Entering destinations After entering the destination During route guidance Settings menu Audible driving recommendations Map functions

3 #HMC QRG DIS.book Seite 2 Freitag, 7. Mai :43 15 Table of contents Voice control General information Help function (teleprompter) Example FM/AM mode Example PHONE mode Operating picklists Command overview INFO INFO main menu Information functions Car setting functions System setting functions Rear Camera* Switching the rear camera view on.. 31 Switching the rear camera view off

4 #HMC QRG DIS.book Seite 3 Freitag, 7. Mai :43 15 Functional introduction System overview Steering wheel Display Head unit Main function buttons Controller 3

5 #HMC QRG DIS.book Seite 4 Freitag, 7. Mai :43 15 Functional introduction System components Controller functions Head unit The head unit is located in the vehicle dashboard. You can push, turn and press the controller. Display Controller Press : Switching audio/ video playback off /on Press and hold: Switching the display off Turn : Setting the volume Disc slot Ejecting a disc Loading a disc Display The display is located in the vehicle dashboard. It does not have any controls. Central control panel The central control panel is located in the front in the vehicle center console. It comprises the controller and the main function buttons. Main function buttons Controller Controller Push : Switching between the different menu areas. Push : Scrolling through a list page by page, or moving to a menu item. Push : Moving the map. Turn to the left or right : Highlighting a menu item and scrolling through a list item by item. Controller Press: Confirming a highlighted menu item. In the following descriptions, highlighting and confirming a menu item is combined into one prompt for action and referred to as selecting. 4

6 #HMC QRG DIS.book Seite 5 Freitag, 7. Mai :43 15 Functional introduction Main function buttons (long press) and (short press) Opening the main menu for the active main function. Switching to DISC mode and playing discs Tuning to a station via the presets (FM or AM) Switching to FM/AM mode, switching the FM mode and switching bands. (short press) Going back one menu level Switching between fullscreen video and menu screen: Video DVD Video CD AUX video Calling up the map display and switching to Navigation mode Switching the map from scroll mode to position mode while the map is displayed Calling up a current audible driving recommendation Opening the Navigation main menu Opening the INFO main menu Opening the PHONE main menu Switching to AUX mode Switching to XM Satellite Radio mode Function buttons on the steering wheel Skipping chapters forward/back ( video DVD) Skipping tracks forward/ back (Audio disc, Video CD, ipod 1 mobile digital device, USB memory stick) and (long press) Tuning to a station via a station search (FM or AM) Tuning to a channel via the channel list (XM Satellite Radio) Selecting discs and playing discs Fast forwarding/ reversing (USB memory stick, ipod 1 mobile digital device) 1 ipod is a trademark of Apple Inc. 5

7 #HMC QRG DIS.book Seite 6 Freitag, 7. Mai :43 15 Functional introduction and Setting the volume (short press) Calling up main functions (long press) Switching audio/video playback off/ on Activating/deactivating the voice control system (short press) Opening the PHONE main menu Switching private mode on/off Accepting an incoming call Accepting a call-waiting call and holding the first call Swapping between two calls (long press) Cancel outgoing call Using redial Rejecting an incoming call Ending a call Ending the active call Menu system Top status line The top status line shows various information. Currently active main function Currently active entertainment source Preset of the currently tuned station in the presets Currently played frequency (in case of DISC mode currently played track or chapter) Audio play mode/stereo availability Bottom status line The bottom status line shows the controller icons among other things. Action of the controller The icons,, and represent the directions of movement of the controller. The icon represents turning the controller. Each individual icon can be shown in white or gray. White icon: Pushing or turning as appropriate initiates an operation. Gray icon: Pushing or turning as appropriate does not initiate an operation Main menu, content area and Options menu Main menu Content area (blue frame = area is active) Highlighted menu item in the content area : Options menu is available : Currently tuned station Basic functions Selecting a menu item Turn until the desired menu item is highlighted, then press. 6

8 #HMC QRG DIS.book Seite 7 Freitag, 7. Mai :43 15 Functional introduction Opening the Options menu Closing a menu Setting the balance/fader Setting the treble/mid/bass With the content area active (blue frame around), push once. You can now select further menu items. Push once, or briefly press. Audio settings In a main menu, select Settings. In the Audio Settings menu, select Balance/Fader. In the Audio Settings menu, select Treble/Mid/Bass. The Audio Settings menu appears, see the following illustration. Main menu Top status line Content area Highlighted menu item in the Options menu Options menu Bottom status line Switching between different menu areas Push repeatedly until the desired area is active (blue frame around it). If a Settings selection menu appears: Select Audio. The Audio Settings menu appears. Audio Settings menu Scale for the fader setting Fader indicator Balance indicator Scale for the balance setting To switch between Balance and Fader: Press. The previously inactive function is now active. To set a value: Turn until the desired setting is reached. Scale for the treble setting Scale for the mid setting Scale for the bass setting Treble indicator Mid indicator Bass indicator Activating a scale: Press or push repeatedly until the desired scale is active. To set a value: Turn until the desired setting is reached. 7

9 #HMC QRG DIS.book Seite 8 Freitag, 7. Mai :43 15 Functional introduction/fm and AM mode Switching surround on/off In the Audio Settings menu, select Surround. Status display Menu item Surround Depending on the previous status, the function will be switched on or off. = function switched on = function switched off Saving the settings The system saves a setting automatically.the respective menus are automatically closed after a short time. HD Radio (TM) information HD Radio TM Technology Manufactured Under License From ibiquity Digital Corporation. U.S. and Foreign Patents. HD Radio TM and the HD Radio logo are proprietary trademarks of ibiquity Digital Corporation. The Driver Information System is able to receive standard analog FM/AM radio broadcasting as well as digital HD Radio TM FM/AM broadcasting. HD Radio TM is a technology to carry digital broadcasting as well as analog ones using existing FM and AM broadcasting frequencies. HD Radio TM reception is available in the United States, including Alaska and Hawaii. Switching to FM/AM mode and switching bands. Press. Illustration shows the FM main menu while receiving a analog FM signal Currently active mode/band Highlighted main menu item Currently active entertainment source Preset of the currently tuned station in the presets If transmitted name of the currently tuned station, else frequency Indicator for stereo reception (analog FM reception only) or HD Radio TM reception (digital AM/FM reception only) If transmitted program type of the currently tuned station (analog FM reception only) or song title currently playing (digital AM/FM reception only), else no display Main menu Tuning to stations Tuning to a FM station via the local station list In the FM Main menu, select Local Stations. The station list appears. To tune to a station: Select the desired station in the station list. Tuning to a station via the presets In the FM or AM Main menu, select Presets. The presets appear. 8

10 #HMC QRG DIS.book Seite 9 Freitag, 7. Mai :43 15 FM and AM mode Preset number of the currently tuned station : Currently tuned station Presets To tune to a station: Select the desired station in the list. Tuning to a station via a search In the FM or AM Main menu, select Tune & Seek. Option 1: Briefly push. The seek proceeds upwards or downwards and stops at the next receivable station. Option 2:: Push or push and hold. The frequency increases or decreases. After releasing, the seek stops at the next receivable station. Tuning to a station via manual tuning In the FM or AM Main menu, select Tune & Seek. Turn. The frequency increases or decreases, depending on the direction of rotation. Tuning to a station via the Scan function To start the Scan function: In the FM or AM main menu, select Scan. The Scan function starts, a corresponding message is displayed. The Scan function will stop automatically, if the frequency from where it has been started is reached again. To stop the Scan function manually: Press. Storing stations Tune to a desired station. In the FM or AM main menu, select Presets. The presets appear. To select a preset: Turn until the desired preset number (here 6) is highlighted. Currently tuned frequency Currently tuned frequency Frequency of the currently tuned station Preset number 6 9

11 #HMC QRG DIS.book Seite 10 Freitag, 7. Mai :43 15 FM and AM mode/xm Satellite Radio mode To store the currently tuned station in the selected preset: Press and hold until the station is stored. XM Satellite Radio information Switching to XM Satellite Radio mode Press. Tuning to channels Tuning to a channel via the Tune & Seek menu In the XM Satellite Radio main menu, select Tune & Seek. The Tune & Seek menu appears. Tuning to a channel via the channel presets In the XM Satellite Radio main menu, select Presets. The presets appear. XM and the XM logos are registered trademarks of XM Satellite Radio Inc. XM Satellite Radio offers the reception of a wide range of programs, e.g. music, sports, news - all in digital quality. XM Satellite Radio is available in the United States (except Alaska and Hawaii) and Canada. Currently active mode Highlighted main menu item Currently active entertainment source Preset of the currently tuned channel in the presets Channel name or number of the currently tuned channel Indicator for XM Satellite Radio mode If transmitted song title currently playing, else no display Main menu Tune & Seek menu Currently tuned channel Info display To tune to a channel: Turn. The system tunes to the next or to the previous available subscribed channel, depending on the rotation. : Currently tuned channel Presets To tune to a channel: Select the desired channel. Tuning to a channel via the Scan function To start the Scan function: In the XM Satellite Radio main menu, select Scan. The Scan function starts, a corresponding message is displayed. 10

12 #HMC QRG DIS.book Seite 11 Freitag, 7. Mai :43 15 XM Satellite Radio mode The Scan function will stop automatically, if the channel from where it has been started is reached again. To stop the Scan function manually: Press. Tuning to a channel via the channel list The channel list contains only channels you have subscribed. In the XM Satellite Radio main menu, select Channel List. The channel list appears. To tune to a channel: Select the desired channel. Tuning to a channel via the category list In the XM Satellite Radio main menu, select Category List. The category list appears. Going back to the category list : Currently tuned channel Channel number Channel name Select the desired channel. To go back to the category list: Press or select the menu item. Tune & Seek menu To tune to a channel: Turn. Option 1 to request the channel preset list: After tuning to the desired channel, push. The Options menu appears. : Currently tuned channel Channel number Channel name Channel list : Currently active category Category list Select the desired category. A channel list according to the selected category appears. Storing channels Storing a channel via the Tune & Seek menu In the XM Satellite Radio main menu, select Tune & Seek. The Tune & Seek menu appears. Menu item Store to Presets Options menu 11

13 #HMC QRG DIS.book Seite 12 Freitag, 7. Mai :43 15 XM Satellite Radio mode Select Store to Presets. The channel preset list appears. Option 2 to request the channel preset list: After tuning to the desired channel, press and hold until the channel preset list appears. To store the channel: Select the desired preset. Storing a channel via the channel presets In the XM Satellite Radio main menu, select Presets. The presets appear. Currently tuned channel Preset number 3 To select a preset (e.g. preset number 3): Highlight the preset number 3. Option 1 to store the currently tuned channel in the preset number 3: Press and hold until the channel is stored. Option 2 to store the currently tuned channel in the preset number 3: Push. The Options menu appears. Menu item Store Channel Options menu Select Store Channel. The channel is stored. Storing a channel via the channel list In the XM Satellite Radio main menu, select Channel List. The channel list appears. : Currently tuned channel Channel number Channel name Channel list To store the currently tuned channel: Highlight the currently tuned channel and push. The Options menu appears. Menu item Store Channel Options menu In the Options menu, select Store Channel. The channel preset list appears. In the channel preset list, select the desired preset. The channel is stored. 12

14 #HMC QRG DIS.book Seite 13 Freitag, 7. Mai :43 15 DISC mode Loading/ejecting a disc The Driver Information System features a built-in disc changer magazine with six compartments. Disc slot Ejecting a disc Loading a disc Loading one disc Briefly press. The system will prompt you to insert a disc with the message Please insert Disc. Insert a disc into the slot. The system will load the disc and then play it. Loading more than one disc Press and hold. Insert the next disc only when prompted with the message Please insert Disc. Ejecting one disc Briefly press. The system will eject the last disc played if available. Remove the disc from the slot. Ejecting more than one disc Press and hold. Remove the discs from the slot one after another. Opening the DISC main menu At least one disc must be loaded. Press. If the system switches to AUX mode: Press again. DISC main menu during playback Illustration shows audio CD playback Currently active mode DISC main menu with list of discs Currently active entertainment source Track currently playing Track list of the disc currently playing (MP3: or folder list) Name of the disc currently playing : track currently playing (MP3: or current folder) Disc currently playing Icon for an audio CD : disc currently playing Audio disc playback Selecting and playing discs Select an audio disc in the list of discs in the DISC main menu. Pausing/resuming playback In the track list, select the track currently playing. The system will pause or resume playback, depending on the previous status. = pause = play Selecting tracks/folders Selecting folders is only available for MP3 or wma discs. Folders can only be selected if the audio files were organized into folders when the disc was created. 13

15 #HMC QRG DIS.book Seite 14 Freitag, 7. Mai :43 15 DISC mode Fast forwarding/reversing In the track list, highlight any track and push. The Options menu appears. Repeating a track/folder and random play Random play Random play of all tracks: Highlight the track currently playing. or Illustration shows the folder/track list of a MP3 disc Moving to the upper folder Folder : Track currently playing Track Highlighted track Track/folder list To switch to the next folder level up: Select. To open a folder: Select the desired folder. To play a track: Select the desired track. Skipping tracks forward/back Press or on the steering wheel. Options menu To start forwarding/ reversing: Highlight FF or REW. Then press and hold. To terminate forwarding/ reversing: Release. Folder Highlighted track Track Repeating a track/folder Repeating a track: Highlight the desired track. or Repeating a folder: Highlight the desired folder. To open the Options menu: Push. Select Repeat Track or Repeat Folder. = function switched on = function switched off Random play within a specific folder: Highlight the desired folder. To open the Options menu: Push. In the Options menu, select Random Disc or Random Folder. = function switched on = function switched off Scan function In the track list, highlight the track from which you want the function to start. Push. The Options menu appears. 14

16 #HMC QRG DIS.book Seite 15 Freitag, 7. Mai :43 15 DISC mode Opening the DISC main menu during video playback Press and hold until the DISC main menu appears. To return to the video fullscreen display: Press. Options menu To switch the function on/ off: Select Scan. = function switched on = function switched off Video DVD/CD playback The video playback function is only available with the gear in P (Park). Switching to DISC mode and starting video DVD/CD playback At least one video DVD/CD must be loaded. Press. If the system switches to AUX mode: Press again. Illustration shows video DVD playback Currently active mode DISC main menu with list of discs Currently active entertainment source Chapter or track currently playing Content area with native video DVD menu or navtive video CD menu Name of the disc currently playing Open the Settings menu Highlighted disc Disc type icon ( = video DVD, = video CD) : disc currently playing To play a disc: Select a video DVD/CD in the list of discs in the DISC main menu. Audio and Video Settings In the DISC main menu, select Settings. The Settings selection menu appears. Settings selection menu Audio settings In the Settings selection menu, select Audio. The Audio Settings menu appears. Audio Settings menu To set the balance/fader: See the section Setting the balance/fader on page 7. To set the treble/mid/bass: See the section Setting the treble/mid/bass on page 7. To switch surround on/off: See the section Switching surround on/off on page 8. Video settings In the Settings selection menu, select Video. The Video Settings menu appears. 15

17 #HMC QRG DIS.book Seite 16 Freitag, 7. Mai :43 15 DISC mode Video Settings menu To set the aspect ratio: Select Aspect Ratio to open the aspect ratio menu and select the desired setting. To set the brightness, color or contrast: Select Brightness, Color or Contrast and turn until the desired setting is reached. The system saves the settings automatically. Native video DVD menu The native video DVD menu includes the following functions: Returning to video DVD fullscreen display DVD top menu/dvd menu which is part of the DVD itself. Chapter list Selecting titles Switching subtitles on/off Switching audio track Switching viewing angle Depending on the content of the DVD currently playing, certain menu items may have no function even though they are displayed. Opening the native video DVD menu During video DVD playback, press. The native video DVD menu appears. Native video DVD menu Example of a function: Selecting titles In the native video DVD menu, select Title List. The title list appears. Select the desired title. Native video CD menu The native video DVD menu includes the following functions: Returning to video CD fullscreen display Switching the display of the PBC (Playback Control) menu on/off Opening the PBC menu Calling up the track list Depending on the content of the video CD currently playing, certain menu items may have no function even though they are displayed. Opening the native video CD menu During video CD playback, press. The native video CD menu appears. Native video CD menu Example of a function: Selecting tracks In the native video CD menu, select Track List. The track list appears. Select the desired track. 16

18 #HMC QRG DIS.book Seite 17 Freitag, 7. Mai :43 15 DISC mode/aux mode Video DVD/CD on-screen menu During video DVD/CD playback, press. The video DVD/CD on-screen menu will be shown over the video currently playing. Fast reverse Fast forward Shows the selected menu item - Depending on the content of the disc currently playing, certain menu items may have no function even though they are displayed. Connecting an AUX device AUX main menu Press. If the system switches to DISC mode: Press again. Pausing/resuming playback Illustration shows video DVD on-screen menu Pause/resume playback Skip chapter back Skip chapter forward Open the native DVD/CD menu Close the on-screen menu Call up the chapter list (video DVD) or the track list (video CD) Select. The system will pause or resume playback, depending on the previous status. Skippping chapters Select or. Fast reversing/forwarding Highlight or, thenpress and hold. To terminate fast reversing/ forwarding, release. 3.5 mm (0.14") jack socket USB socket Supported signal sources You can connect the following signal sources to the Driver Information System: 3rd to 5th generation ipod or ipod Mini ipod is a trademark of Apple Inc. USB memory stick containing audio files AUX signal source (commercially available audio/ video signal source) Illustration shows ipod playback Currently active mode AUX main menu with list of signal sources Currently active entertainment source : Track currently playing Track currently playing Content area with track list (Blue frame = area active) Top category of the track currently playing 17

19 #HMC QRG DIS.book Seite 18 Freitag, 7. Mai :43 15 AUX mode ipod playback Please use a special ipod cable available for purchase at a Hyundai dealership for proper operation. Starting playback Connect an ipod mobile digital device or open the AUX main menu. Playback of the currently active track in the ipod mobile digital device will be continued. Opening the ipod menu During ipod playback push oruntil the content area is active (blue frame around it). With the content area active, press repeatedly until the ipod menu appears. ipod menu Navigating within the ipod menu Forwards: Select a menu item in the ipod menu. Backwards: Press. To play a track: Select the desired track. USB playback Starting playback Option 1: Connect an USB memory stick containing audio files. Option 2: Open the AUX main menu and, if necessary, select the USB stick as the signal source. Selecting tracks/folders Moving to the upper folder Folder : Track currently playing Track Highlighted track Track/folder list To switch to the next folder level up: Select. To open a folder: Select the desired folder. You will see the tracks stored in this folder. To play a track: Select the desired track. ipod and USB playback functions Pausing/resuming playback Highlight the track currently playing and press. The play icon or the pause icon shows the corresponding status. Skipping tracks forward/back Press or on the steering wheel. Fast forwarding/reversing Highlight any track and push once. To start forwarding/ reversing: Select FF or REW. Then press and hold. To terminate forwarding/ reversing: Release. Blue frame Content area 18

20 #HMC QRG DIS.book Seite 19 Freitag, 7. Mai :43 15 AUX mode Repeating a track/folder and random play (only USB) Folder Track Highlighted track Repeating a track/folder Repeating a track: Highlight the desired track. or Repeating a folder: Highlight the desired folder. Random play Random play of all tracks: Highlight the track currently playing. or Random play within a specific folder: Highlight the desired folder. To open the Options menu: Push. To switch a function on/off: In the Options menu, select Random Track or Random Folder. = function switched on = function switched off Repeating a track and random setting (only ipod ) Random setting The random setting switches the shuffle song function of the ipod mobile digital device on or off. Highlight any track. To open the Options menu: Push. To switch the function on/ off: In the Options menu, select Random. = function switched on = function switched off Scan function (only USB) Highlight the track from which you want the function to start. To open the Options menu: Push. AUX source playback Connect an AUX (audio/video) signal source. If necessary, select the desired signal source in the AUX main menu. The AUX full-screen display appears. Start playback on the AUX signal source. To open the AUX main menu during AUX source playback: Press. To return to the AUX fullscreen display: Press. To open the Options menu: Push. To switch a function on/off: In the Options menu, select Repeat Track or Repeat Folder. = function switched on = function switched off Repeating a track Highlight the desired track. To open the Options menu: Push. To switch the function on/ off: In the Options menu, select Repeat Track. = function switched on = function switched off To switch the function on/ off: In the Options menu, select Scan. = function switched on = function switched off 19

21 #HMC QRG DIS.book Seite 20 Freitag, 7. Mai :43 15 PHONE Pairing a mobile phone To use a mobile phone with the system, it must be equipped with Bluetooth wireless technology and with the following Bluetooth 2.0 profiles: Hands-free profile (HFP) Phone book access profile (PBAP) The Bluetooth feature on the mobile phone must be activated before attempting to pair or connect a mobile phone. To open the PHONE main menu: Press. If the system switches to INFO mode: Press again. In the PHONE main menu, select Connect Phone. The device list appears. Device list Select Register New Phone. The Bluetooth name of the Driver Information System is GENESIS, it is displayed under this name on the mobile phone. Bluetooth name of the Driver Information System Passkey Remaining time for entry of the passkey Start pairing on the mobile phone. When prompted, enter the passkey. Connecting a mobile phone After the system is switched on, it automatically attempts to reconnect with the last mobile phone connected. The following conditions must be met for this: The mobile phone is switched on and is within the system reception range. The mobile phone is still paired with the system. Bluetooth is activated on the mobile phone. In the Settings menu, BT Autoconnection is activated =. Settings menu Device list and pairing/ connection status To open the PHONE main menu: Press. If the system switches to INFO mode: Press again. Select Connect Phone. The device list appears. : Mobile phone is paired with the system and currently connected : Mobile phone is paired with the system, but not currently connected Phone name Device list Connection status icon = No mobile phone is connected, = A mobile phone is connected 20

22 #HMC QRG DIS.book Seite 21 Freitag, 7. Mai :43 15 PHONE/Navigation Calling functions Initating an outgoing call To open the PHONE main menu: Press. If the system switches to INFO mode: Press again. Select Dial Number. The input menu appears. Input field with digits already entered Speller Enlarged display of the currently highlighted character in the speller Initiate a call Store number in the phonebook Delete the last digit in the input field Delete all digits in the input field Currently highlighted digit The input menu has two usercontrol areas: The area with the speller and the area with, and. To move from one area to another: Push. To enter a number: In the speller, highlight a digit by turning and press. The digit is entered and appears in input field. To initiate a call: From the speller, push and select CALL. To cancel a call: Press. Using the call history list In the PHONE main menu, select Call History. The call history list appears. To initiate a call: Select the desired entry. The mobile phone initiates the call. If the other party answers, the call is active and you conduct it over the hands-free unit. Accepting/rejecting an incoming call The call menu is displayed when there is an incoming call. Select Accept or Reject. When you accept the call you conduct it over the hands-free unit. Ending a call In the call menu, select END. XM NavTraffic information Licensing information XM, XM NavTraffic and the XM logos are registered trademarks of XM Satellite Radio Inc. Availability information The XM NavTraffic service is available for a modest monthly fee. It covers many metropolitan markets. For further information about XM NavTraffic please visit the following website: 21

23 #HMC QRG DIS.book Seite 22 Freitag, 7. Mai :43 15 Navigation Navigation main menu In the Navigation main menu, you can access the following menu items: Destination for entering destinations Show Route for displaying the calculated route again (only available when route guidance is active) Change Route for adding and changing waypoint (only available if a destination has been entered) Edit Addr. Book for editing Address Book entries Settings for general settings Opening the Navigation main menu Press. Navigation main menu Highlighted menu item Submenu items of the highlighted menu item Entering destinations The entering of a destination is possible via: an address, the Previous Destinations, intersection input, POI name, POI category, POI phone number, a POI vicinity search, the Address Book, an emergency destination, the map. Various examples are desrcibed in the following. Entering a destination via the address and house number In the Navigation main menu, select Destination. A selection list appears. In the selection list, select Address. The address input menu appears. Input progress display (in the example currently entered state/province) Hit list (empty if no address has been entered) Input field Predictive speller Confirm entry Delete all characters in the input field Delete the last character in the input field Menu item for entering the state/province Enlarged display of the currently highlighted character in the predictive speller Enter the address information (i.e. state, street name, house number, city). To enter a character: In the predictive speller, highlight a character and press. The character is entered and appears in the input field. To delete characters in the input field: Select (delete last character) or (delete all characters). To confirm an entry: If OK is highlighted, press. If prompted, select an entry in the hitlist. 22

24 #HMC QRG DIS.book Seite 23 Freitag, 7. Mai :43 15 Navigation Entering a POI destination via POI name In the Navigation main menu, select Destination. A selection list appears. In the selection list, select Point of Interest. The POI main menu appears. POI main menu Select Name. The POI name input menu appears. Input progress display (in the example currently entered state/province) Hit list (empty if no name has been entered) Input field Predictive speller Menu item for setting a category/city filter Delete all characters in the input field Delete the last character in the input field Menu item for entering the state/province Push and select State/ Prov.. Enter a state/province as with entering an address on page 22. Enter a POI name and push to complete the entry. You will see the POI list. POI list POI with sub entries (number of sub entries) Select an entry in the list. Selecting a POI destination via a vicinity search POIs (points of interest) include gas stations, restaurants and banks, for example. Press. The map appears. Press. The Options menu appears. Select POI Icon. The POI menu appears. Map display shows night mode POI menu POI categories already activated Activate or deactivate desired POI categories and subcategories. You can activate a maximum of fice categories. = activated = deactivated 23

25 #HMC QRG DIS.book Seite 24 Freitag, 7. Mai :43 15 Navigation Press repeatedly until the POI menu appears again. In the POI menu, select Show POI List. A selection list appears. Select a POI in the list. Entering the destination via the map Press. The map appears. Push (and hold) to move the target crosshairs to the desired location on the map. Press. You may be prompted to confirm that you wish to accept the destination. Select Yes. After entering the destination Route calculation After the destination has been confirmed, route calculation starts. After the route has been calculated, you will see the map, route information and the Options menu on the right. Map display shows night mode Remaining distance/journey time to destination Route information Options menu Waypoints (Yellow icons ) Destination (Icon ) Route Current vehicle position Functions available in the Options menu Start Route Guidance manually Other Routes for calculating alternative routes Simulate Route for simulating the journey Change Route for adding and changing waypoints During route guidance Route and route guidance options Press. The map appears. Press. The Options menu appears. Suspending/resuming route guidance In the Options menu, select Cancel/Suspend or Resume Guidance. Changing the route In the Options menu, select Reroute/Detour. The Route menu appears, = current active route. Select another route by the available categories. or Select a distance to block a route section. The system calculates the new route. Settings menu In the Navigation main menu, select Settings. The Settings menu appears. 24

26 #HMC QRG DIS.book Seite 25 Freitag, 7. Mai :43 15 Navigation Functions available in the Settings menu Setting the volume of the audible driving recommendations Map display settings Ferry preference settings Avoid Area settings Displaying navigation information Reset function Audible driving recommendations Setting the volume In the Settings menu, select Guidance Volume, followed by Adjust Volume. Turn until the desired setting is reached. The system saves this setting automatically. Repeating a recommendation Press. Map functions Calling up the map display Press. The map display appears. Map display shows day mode Currently set map orientation Current set map scale Remaining distance/journey time to destination Current vehicle position Route Outside temperature Voice control is active XM NavTraffic information available Switching the map orientation Press. The map display appears. Press. The Map Options menu appears. Select Heading Up View or North Up View. = fixed map orientation, north is always at the top = dynamic map orientation, driving direction is always at the top Map display settings In the Navigation main menu, select Settings. The Settings menu appears. Select Map Display. You can select various functions such as switching the map display to day, night or automatic mode, or switching between miles and kilometers display. Moving the map/setting the map scale To activate scroll mode: Push, or. If the map was previously in position mode, it will switch to scroll mode and the target crosshairs will be displayed. Map display shows night mode Information on the crosshairs position Crosshairs Current vehicle position Straight line distance and direction from current vehicle position to crosshairs position Currently set map scale 25

27 #HMC QRG DIS.book Seite 26 Freitag, 7. Mai :43 15 Navigation/Voice control To move the map: Push and hold, or. The map moves accordingly. To set the map scale: Turn until the desired scale is reached. To set the map to the vehicle position: Press. The crosshairs disappear. The map is automatically set to the current vehicle position and is in position mode. Information on the current vehicle position Press. You will see an information display at the top, if the digital map contains corresponding data. General information Commands must be pronounced clearly in a quiet environment for voice commands. For saying a command, press on the steering wheel and await the signal tone. Help function (teleprompter) The help function provides an audible and visual help component, also referred to as a teleprompter. The help function can be activated at any time using the command Help, or it is automatically activated as soon as receives an incorrect voice input or command. Example FM/AM mode Switching to FM/AM mode Press on the steering wheel and say Radio after the signal tone. The FM or AM main menu appears on the display. The last selected station is played. Tuner mode help Press on the steering wheel and say Radio commands after the signal tone. The teleprompter is opened. You will hear all commands available for FM, AM or XM tuner mode. Example PHONE mode Switching to PHONE mode Phone commands can be used only while a Bluetooth mobile phone is connected to the system. Press on the steering wheel and say Bluetooth after the signal tone. The PHONE main menu appears on the display. Dialing a number Press on the steering wheel and say Dial number after the signal tone. Use the numbers 0 to 9 to enter the number. 26

28 #HMC QRG DIS.book Seite 27 Freitag, 7. Mai :43 15 Voice control Operating picklists The voice control system can display picklists to you on the display, for example the channel list in the XM tuner mode. Scrolling through a picklist You can scroll through any picklist using the commands Next page, Previous page, Back, First Page or Last Page. Selecting an entry in a picklist Within picklists, you have the following two options for selecting an entry. Option 1: Say the contents as they are displayed in the row. Option 2: Say Line...(1-8). Command overview Group commands (Help) For the help function Help For the main functions Main menu For tuner mode Radio commands Station commands Frequency commands For DISC and AUX mode Media commands Disc commands Track commands Folder commands For PHONE mode Phone commands For Navigation mode Navigation commands Address book commands Destination search commands Route guidance commands Map commands For Various commands Various commands Tuner commands Mode selection commands Radio XM Help command Radio commands Wave band selection commands FM AM FM mode commands FM1 FM2 Station selection commands (FM/AM tuner mode only) Next station Previous station Seek up Seek down Frequency selection commands (FM/AM tuner mode only) FM...( ) AM...( ) Preset selection command Preset...(1-16) Station scan command Scan 27

29 #HMC QRG DIS.book Seite 28 Freitag, 7. Mai :43 15 Voice control Channel commands (XM tuner mode only) Next channel Previous channel Channel...(1-255) Channel by name DISC and AUX commands Mode selection commands Disc External device ipod USB AUX Help command Media commands Disc selection commands Next disc Previous disc Disc...(1-6) Folder selection commands Next folder Previous folder Track selection commands Next track Previous track Track...(1-99) Random function commands Random song Random stop Phone Commands Mode selection command Bluetooth Help command Phone commands Dialing commands Dial number Redial Call by name Call...* 1 Call...* 1 Home Call...* 1 Mobile Call...* 1 Work Storing command Store number Navigation commands Mode selection command Navigation Help command Navigation commands Destination entering commands Enter state Enter province Enter city Enter address Phone number search Address Book commands Navigate home Navigate work Navigate to favorite point... (1-4) Navigate to previous destination Navigate to Address Book Navigate to...* 2 Suspending/resuming route guidance command Suspend route guidance Resume route guidance 1. Name of the phonebook entry 2. Name of the address book entry 28

30 #HMC QRG DIS.book Seite 29 Freitag, 7. Mai :43 15 Voice control/info Route redefining commands Reroute Reroute shortest distance Reroute minimize freeway Reroute minimize toll road Reroute shortest time Detour setting commands Detour Detour 1 mile or Detour 1 kilometer Detour 2 miles or Detour 2 kilometer Detour 5 miles or Detour 5 kilometer Detour 10 miles or Detour 10 kilometer The usage of miles or kilometer depends on the map display setting, see section Map display settings on page 25. Navigation announcement commands Guidance voice off Guidance voice on Map commands Display map Map zoom in Map zoom out Map zoom maximum Map zoom minimum Display route Map north up Map heading up Traffic information commands Traffic Information On Traffic Information Off Various commands Help command Various commands Other available commands Display off Display on Display on Front full display off Front full display on AV off AV on INFO main menu Press. If the system switches to INFO mode: Press again. The INFO main menu appears. Various functions are available, please see the following description. INFO main menu The availability of a function depends on the vehicle equipment. 29

31 #HMC QRG DIS.book Seite 30 Freitag, 7. Mai :43 15 INFO Information functions Climate shows driver and passenger temperature settings, outside temperature, and fan setting. Highlight the desired menu item and push once to open the Options menu. Display brightness Select Display Brightness followed by turning until the desired setting is reached. Vehicle Height shows the current vehicle height setting. Suspension Info shows the suspension hardness setting. Car setting functions Car Settings include settings such as Auto Door Lock or Key Activates Alarm. In the INFO main menu, select Car Settings. Car Settings menu : Currently active setting Options menu Select the desired setting. System setting functions System Settings include settings such as Language or Display Brightness. In the INFO main menu, select System Settings. The System Settings menu appears. Various functions are available, please see following descriptions. System Settings menu : Options menu is available Function Display Off or Full Display Off Certain information will continue to be displayed even when the display is switched off using the function Display Off. Using the function Full Display Off, you can completely switch off the display. Select Display Off or Full Display Off. Other functions Highlight a menu item with Options menu available. Push once to open the Options menu. : Currently active setting Options menu Select the desired setting. 30

32 #HMC QRG DIS.book Seite 31 Freitag, 7. Mai :43 15 Rear Camera* Switching the rear camera view on The availability of this function depends on the vehicle equipment. Shift the gear lever to the position R (Reverse). The monitor will switch to rear camera view. The display in the vehicle may be different from the picture below. Red line Yellow line Green line The three lines, and are showing the following distances, each measured from the rear bumper: Red line = 1.64 ft (50 cm) Yellow line = 3.28 ft (100 cm) Green line = 9.84 ft (300 cm) Switching the rear camera view off The rear camera view will automatically switch off if the gear lever is shifted to the position D and the vehicle exceeds a certain speed. While the rear camera view is displayed, shift the gear lever to any position except R. The monitor will return to the normal view. 31

33 #HMC QRG DIS.book Seite 32 Freitag, 7. Mai :43 15