QOMO. Hi! Let s get started. QOMO

Transcription

1 QOMO Hi! Let s get started. QOMO

2

3 0 Checking the Components POWER Play/Pause Hi! MUTE VOL+ PREV Let s get started. NEXT VOL- SR- SR-2 BT OPT HDMI USB AUX AUX2 3D Soundbar Digital Optical cable Remote control Insert 2pc of AAA batteries before use Stereo RCA to 3.5mm audio cable Power adapter Wall Mount Template Mount screws Wall mount template User s guide Wall mount brackets

4 02 Product Overview Front Panel / Right Side Panel of the Soundbar M LED indicator, display different color and current mode. 2 Turns the power on or select the source input mode, press and hold to power off. 3 Adjusts the volume, when adjusting, the LED indicator flashes until the volume to the MAX or MIN. 4 Pause and play. Bluetooth Optical Coaxial AUX (R/L) When you plug in the power cord, the buttons will begin working in 2 to 4 seconds. If you want to enjoy sound only from the Soundbar, you must turn off the TV s speakers in Audio Setup menu of your TV. Refer to the owner s manual supplied with your TV AUX2 USB

5 Bottom Panel of the Soundbar OPTICAL 3 2 COAXIAL AUX L AUX R AUX2 USB DC IN POWER Digital Audio In (optical), connect to the digital (optical) output of an external device. 2 Coaxial Audio In (coaxial), connect to the digital (coaxial) output of an external device. 3 AUX (L/R), connect to the Analog output of an external device. 4 AUX2 (3.5mm jack), connect to the Analog output of an external device. 5 USB, connect a USB device here to play music files on the USB device through the Soundbar. 6 DC IN (Power Supply In), connect the AC/DC power adapter. 7 Power button, press to power on / off. When disconnecting the power cable of the DC/AC power adapter from a wall outlet, pull the plug. Do not pull the cable. Do not connect this unit or other components to an AC outlet until all connections between components are completed.

6 03 Connecting Electrical Power DC IN Outlet. Using the power adapter to connect the unit to electrical outlet in the figure 2. Press the power button to power on the Soundbar (LED indicator is on) Make sure to rest the AC/DC adapter flat on a table or the floor. If you place the AC/DC adapter so that it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the adapter and cause the adapter to malfunction.

7 04 Connecting with a TV (Choose only method) Method. Connecting with an Optical cable OPTICAL Optical OPTICAL OUT Optical digital cable (supplied) White color LED. Connect the DIGITAL AUDIO IN(OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable. 2. Press the OPT button on the remote, and the LED indicator will be WHITE You must use Soundbar s remote to power on or control the volume under this connection. If no sound or cracking noise, set your TV s audio output to PCM. Take the caps off on the OPTICAL jack TV

8 Method 2. Connecting with a Coaxial cable COAXIAL OUT COAXIAL Coaxial Coaxial digital cable (not supplied) Green color LED. With the Soundbar and TV turned on, connect the Coaxial cable as shown. 2. Green color LED appears and the Soundbar plays TV sound. If TV sound is inaudible, press the COAX button on the remote or on the right side of the Soundbar to switch to Coaxial mode. The LED will be green and TV sound is played. You must use Soundbar s remote to power on or control the volume under this connection. If no sound or cracking noise, set your TV s audio output to PCM. (Refer to TV s manual) TV

9 Additional information: How to Change My TV to PCM Step : Press "Menu" on the remote control. If you do not have a remote control, press "Menu" on the television. Step 2: Press the arrow keys on the remote to scroll to "Audio Settings." If you do not have a remote control, press the "Volume Up" and "Volume Down" buttons to scroll. Step 3: Press "OK" on the remote control. Press "Enter" on the television if you do not have a remote. If the television does not have an "Enter" button, the "Menu" button is often used. Step 4: Scroll to "Advanced Audio" and press "OK." Some televisions may not have an "Advanced Audio" menu and may list various audio settings instead. Step 5: Scroll to "Audio Output Mode" or "Digital Audio Output Mode" and press "OK." Step 6: Scroll until "PCM" is displayed as the current audio output. Step 7: Press "OK" to save the settings. Depending on the model of television, steps maybe different, please refer to TV s manual

10 Method 3. Connecting via AUX / AUX2 AUX AUX2 AUX L AUX R AUX2 RCA to 3.5mm cable (supplied) Headphone jack 2 RCA to 3.5mm cable (supplied) L AUDIO Connect AUX(L/R) on the Soundbar to the AUDIO OUT(Headphone) jack of the TV using the RCA to 3.5mm cable. Select LIGHT BLUE led indicator by pressing the AUX button on the remote. Connect AUX2 on the Soundbar to the AUDIO OUT(L/R) jack of the TV using the RCA to 2 3.5mm cable. Select Yellow led indicator by pressing the AUX2 button on the remote. If no sound or echo, set your TV s audio output to external speaker. (Refer to TV s manual) Choose only one connection from above, it depends on your TV s audio output jack R TV

11 05 Connecting an External Device BD / DVD / Set-top box / Game console Optical digital cable (supplied) OPTICAL OUT OPTICAL OUT 2 L AUDIO R RCA to 3.5mm cable (supplied) AUX2 3 Headphone jack RCA to 3.5mm cable (supplied) AUX L AUX R Optical Cable. Connect DIGITAL AUDIO (OPTICAL) on the Soundbar to the OPTICAL OUT jack of the Source Device using a digital optical cable. 2. Select WHITE led indicator by pressing the OPT button on the remote. 2 3 RCA to 3.5mm Cable. Using the RCA to 3.5mm cable to connect TV and Soundbar. 2. Select led indicator accordingly by pressing the button on the remote(aux / AUX2).

12 06 Connecting a USB USB Purple color LED USB USB Device. Connect your USB device to the USB jack on the Soundbar. 2. Select PURPLE led indicator by pressing the USB button on the remote. 3. Play music files from the USB device through the Soundbar.

13 07 Connecting a Bluetooth Device Bluetooth Blue color LED The initial connection. Press the BT button on the remote, the LED indicator blinks blue. 2. Turn on Bluetooth on the Bluetooth device. ( see the device s manual for more information) 3. Select QSB00 from the list, connect it. When your Bluetooth device is connected, the LED indicator blinks blue slowly. 4. Play music files from the device, connected via Bluetooth, throught the Soundbar. You cannot connect more than one Bluetooth device at a time. Bluetooth Device

14 Additional Bluetooth information. If you hear any break-up while streaming music from your device, move closer to your Soundbar. 2. Bluetooth signal has a range of up to 30 feet if there are no solid obstructions between your Soundbar and source device. 3. Other wireless devices may interfere with Bluetooth range, including wireless video monitors, cordless phones, wireless cameras, etc., moving or turning off these devices may improve Bluetooth range. Bluetooth signal up to 30 feet Reduce the volume on your device or Soundbar, high volume can damage your hearing.

15 08 Know Your Remote Power the remote by inserting 2 pcs of AAA batteries 3 POWER Play/Pause MUTE D SR- BT OPT COAX USB AUX AUX2 Turns the Soundbar on and off. 2 Press the button to mute and unmute. 3 Press the button to pause and play a music. 4 7 Press the buttons to adjust volume. 5 6 Press the buttons to select previous or next music file. SR Three kinds of Audio Modes to select: 3D mode fills your room with sound. SR- mode gives clear sound for TV shows and News. SR-2 mode provides deeper bass in movies and musics. 9 Press to select a source(input) connected to the Soundbar. BT : Bluetooth mode, led indicator: OPT : Optical mode, led indicator: COAX : Coaxial mode, led indicator: USB : USB mode, led indicator: AUX : AUX(R/L) mode, led indicator: AUX2 : AUX mode, led indicator:

16 09 Installing the Wall Mount. Place the wall mounting template against the wall under your TV, using a pencil to mark the bracket holes. The template must be level. Leave 3 inches at least between the template and TV. TV 2. Remove the template, using an appropriately sized drill bit, drill a hole in the wall at each marking. Be sure the wall is vertical wall. (drywall) 3. Push the green Holder-Screw to the each hole on the wall, and screw each screws (supplied) through each bracket firmly into a support Holder-Screws hole. Screw Bracket 3 inches or more Wall Mount Template 4. Install the Soundbar by hanging the bracket on the wall. Pencil Wall Mount Equipment Consult a professional installer if you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home.

17 0 Attach Soundbar to touch screen Mount on the top of Touch Screen.Attach two brackets to the holes on the horizontal support with 6pcs PWM4*6 screws according to the touch screen model. Hole location for 86 Hole location for 65 Hole location for 75

18 2.Use 2pcs PM8*2 screws to fix the assembled soundbar bracket on the top of touch screen. 3.Mount soundbar on the bracket finally.

19 Mount at the bottom of Touch Screen.Attach two brackets to the holes on the horizontal support with 6pcs PWM4*6 screws.

20 2.Use 4pcs BM8*2 screws to fix the assembled soundbar bracket at the bottom of touch screen. 3.Mount soundbar on the bracket finally.

21 Troubleshooting If you have a problem with your Sound Bar, there is quick simple solution, first make sure: The cables between Sound Bar and input devices are securely connected, the power adapter also connected to a working power source. The adapter LED indicator is lighting, and the LED indicator is lighting in the middle of Sound bar, No sound or crackling noise Check if all cables connected properly. Press Mute on the remote to ensure the Sound Bar is not muted. Press Volume+ on the remote or the right side of your Sound Bar. Make sure you have selected the right input source on your remote, and the LED is lighting accordingly. If using Bluetooth, check if the sound on your device is under minimum volume. If using Optical/Coaxial, check if your device (TV/Cable Box/Projector/etc.) audio output set to PCM or turn the Dolby/dts off. When using cable connection, make sure your device has audio output port (not input). Remote isn t working Check if the battery is installed properly with power. Check if the signal of the receiver is covered by something. The working distance of remote is 6-8m(empty place)

22 I hear buzzing or humming Ensure all cables and wires are securely connected. Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may be with the original device. Connect your device to a different input on the Sound Bar. Bluetooth can t be connected Check if the Sound Bar is connected with the third Bluetooth device. Be sure that there are no solid obstructions between the Sound Bar and source device.(within 30 feet) Reboot the Bluetooth and connect again. Can not sync to universal remote The remote only can be synced to IR learning universal remote (eg: Logitech harmony). Hear echo when watching TV Setting your TV audio to External Speaker. Mute the TV speaker. Want to remove power save feature (audo power off if no audio input)? Please contact to your retailer for assistance.

23 2 Important Notes About Service Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. 3 Specifications QSB00 Soundbar: Inputs: Sound Pressure Level (System): Frequency Response (System): Compliances: Place of Origin: Four Mid-Low Range Driver + Two High Range Driver Bluetooth / RCA / AUX / Optical / Coaxial / USB 05 db 50 Hz to 20 KHz UL, FCC, ROHS, CE China

24