This unit has a long cord that can easily be tripped on or pulled on, causing injury,please make sure

Transcription

1 Model: CHT915

2 This unit has a long cord that can easily be tripped on or pulled on, causing injury,please make sure

3

4 POWER SOURCE Insert the small plug from supplied AC/DC adaptor to DC IN jack on the rear of the unit and insert the AC/DC adaptor to the wall outlet having AC ~;50/60 Hz. NOTE:This AC/DC adapter is intended to be correctly operated in a vented indoor wall outlet. INSTALLATION Placing on Floor in Vertical AC/DC adapter To the DC IN jack on the rear of unit. Screw Washer Plastic Base Assemble the plastic base to the main body with the supplied screw and washer as the figure above.

5 Placing on Floor in Vertical (Continued): Remote Sensor Speaker Net Speakers The Speaker Net can be take out and reassembled as the figure above. 4

6 Placing on Table in Horizontal To place the unit on a flat surface such like table, insert the 2 (two) suppliedplastic Brackets into the small slot of the holder on the rear of unit as the Fig.1 below. Small Slot Fig.1 Fig.2 Insert the 2 (Two) supplied Plastic Stands into the inner small slot as the Fig. 2 above. 4

7 Wall Mount 1. Wall mount the unit to the wooden wall A : Mounted the 2 (Two) supplied Metallic Brackets on the wooden wall by the 4 (Four) supplied screws as the Fig.1 below: Fig.1 Holes distance:31.6 inches supplied bracket in same horizontal level supplied screws supplied screws supplied bracket B : Put the sound bar onto the Metallic Brackets as Fig.2 below. Make sure they are firm and stable. Fig.2 Big Slot Wooden Wall 5

8 INSTALLATION Wall Mount (Continued): 2. Mount on Wall Mark and drill 4 holes with 31.6 inches distance in same horizontal level. A.Mark the position of the mounting holes on the wall using a pencil. B.Drill appropriate holes by powerful electric drill on wall. C.Insert the supplied plastic inserts into the holes by hammer. D.Mounted the supplied Metallic Brackets to the holes with supplied screws. E.Put the unit to the Metallic Brackets as the figure below. Big Slot Wall 6

9 LOCATION OF CONTROLS MAIN UNIT 1. INDICATOR 2. AUX IN 2 jack 3. SOURCE button 4. VOL- (Volume Down) button 5. EQ (Equalizer) button 6. VOL+ (Volume Up) button 7. POWER button 8. / TUNE+ button 9. (Play/Pause) button 10. / TUNE- button 11. FM Antenna 12. AUX IN 1 jacks 13. DC IN jack 1 INDICATOR AUX IN EQ SOURCE VOL- VOL+ 7 8 POWER TUNE- TUNE ANT R L AUX IN 1 DC IN DC 16V, 1.8A 13 7

10 LOCATION OF CONTROLS REMOTE CONTROL POWER 2 3 TUNE- SOURCE TUNE VOL EQ POWER button 2. / TUNE - button 3. VOL (Volume)+/- buttons 4. SOURCE button 5. (Mute) button 6. / TUNE+ button 7. (Play/Pause) button 8. EQ (Equalizer) button 8

11 BATTERY INSTALLATION--- REMOTE CONTROL -First Time Use Remove and discard the insulation tab as figure on the right -Replacing Batteries For Remote Control 1. Push and slide out the battery holder as figure 1 below. 2. Replace the battery with a new CR2025 button cell as the polarity markings on the rear of the Remote Control. 3. Close the battery holder. Fig.1 Fig.2 Fig.3 BATTERY PRECAUTIONS EFFECTIVE DISTANCE OF REMOTE TRANSMITTER Remote Sensor. Approx.15 feet 9

12 GENERAL OPERATIONS 1. Connect the AC/DC adapter to the unit and wall outlet as the previous procedure. The red indicator will light. 2. Press the Power button on the unit or remote control to power on the unit from standby mode. 3. Press the SOURCE button repeatedly to switch to desired mode.the color of Indicator will turn to corresponding color as below: ~ Green: Radio ~ Blue: BT(Blue Tooth) ~ Purple: AUX IN 1 ~ Orange: AUX IN 2 4. During Playback: ~ Press the VOL (Volume) buttons to adjust volume level as desired. ~ Press the EQ button repeatedly to select and set equalizer mode as desired. ~ Press (Mute) button on the Remote Control to turn off the sound. Press again to resume. 5. When finished listening, press the Power button to power off the unit.the indicator will turn Red. 6. If long period of time will not use the unit, unplug the AC/DC Adaptor from the wall outlet. 10

13 LISTEN TO FM RADIO 1. Power ON the unit as previous procedures. 2. Press the SOURCE button repeatedly until the color of the indicator changed to Green. 3. Press and hold the /TUNE - or /TUNE + buttons until the indicator starts blinking. The unit will start to search next (or previous) available FM radio station then plays. 4. Repeat the same procedures until the desired radio station are received. FM Antenna The Antenna wire on the rear of the unit is for radio reception. If reception is weak, unwind and extend the wire or relocate the wire to improve the radio reception. BLUETOOTH PARING AND PLAYBACK 11

14 L AUX IN 1 : LISTEN TO TV/DVD/VCR/DVR White Audio out jacks on TV/DVD/ VCR/DVR AUX IN 1 R AUX IN 1 Red (RCA cable included) DVD 1. Connect one end of RCA audio connection cable (supplied) to the AUX IN 1 jacks on the rear of the unit as the figure above. 2. Connect the other end to the Audio out jacks on the external player (such as Television, VCR, DVD Player, DVR... etc.). 3. Power ON the unit as previous procedures. 4. Press the SOURCE button repeatedly until the color of indicator turns to Purple. 5. Play the music in the external player as usual. (Make sure the volume output level of the player is in high level. Otherwise, sound from this unit is weak). 12

15 AUX IN 2 : LISTEN TO EXTERNAL AUDIO DEVICES INDICATOR AUX IN 2 EQ SOURCE VOL- VOL+ POWER TUNE- TUNE+ 1. Connect one end of supplied audio connection cable to the AUX IN 2 jack on the top of the unit as the figure above. 2. Connect the other end to the Audio out/line out/phone jack on the external player (such like ipod, iphone, ipad, MP3 player, Discman... etc.). 3. Power ON the unit as previous procedures. 4. Press the SOURCE button repeatedly until the color of Indicator turns to Orange. 5. Play the music in the external player as usual. (Make sure the volume output level of the player is in high level. Otherwise, sound from this unit is weak). 13

16 TROUBLESHOOTING GUIDE Check the followings before requesting service SYMPTOM POSSIBLE CAUSE POSSIBLE SOULTION No power Power AC/DC adapter not connected The unit is in Standby mode Connect the power AC/DC adapter Press button to turn on the unit No sound Volume in minimum position The connected device is not in payback mode Input source incorrect Raise volume level by pressing the VOL (Volume) + button Play the music/movie in the connected device as usual and make sure the volume level of it is in high level Press the SOURCE button repeatedly to set the input source to the desired mode Sound distortion Bass level of the connected device too high Volume level too high Reduce the bass level of the connected device Reduce the volume level by pressing the VOL (Volume ) - button Remote not working The batterry is consumed Replace with new battery Bluetooth reception failure The external device is far from the unit Have not paired Put the external BT device close to the unit Pair both units as BT pairing page 14

17 GENERAL SPECIFICATIONS Power Source... DC V; 1.8A. Radio Coverage...FM MHz Impedance of Speakers: Loud Speakers... 8 Ohm, 15W x 2 Tweeters... 8 Ohm, 5W x 2 Bluetooth Effective Range in Open Aera...Up to 32 feet Remote Effective Range...Up to 15 feet Accessories 1 x AC/DC Adaptor ( Input: AC V~ ; 50/60Hz; 0.8A.Output: DC V; 1.8A ) 1 x Remote Control, using CR 2025 button cell ( Included,already installed in remote control ) 1 x Stereo Audio Connection Cable with 3.5mm stereo plugs 1 x User's Manual 1 x RCA Connection Cable 1 x Plastic Base 2 x Metallic Brackets 4 x Plastic Inserts ( For Wall Mount ) 4 x Metallic Screws ( For Wall Mount ) 2 x Plastic Brackets ( For Stand on Flat Surface ) 15

18 16 15