Wi-Fi. Vehicle mounted display screen

Size: px

Start display at page:

Download "Wi-Fi. Vehicle mounted display screen"

Collin Bruno Barton
5 years ago
Views:

1 Wi-Fi Vehicle mounted display screen

2 12. Simple trouble shooting 1. Screen display is not stable, there is a flash screen or automatic re opening phenomenon. Exclude :Please check whether the power supply is stable. Please confirm that the power input is up to 12V/1A. 2. Picture Caton or Huaping phenomenon appears in the same screen Exclude: Please check the surrounding wireless interference is serious, There is no signal shielding device placement, At the same time check the video line connection is normal. 3. Android Miracast Wireless connection (Common for Samsung) Exclude: Please restart your mobile phone, while checking whether the phone is ROOT. 4. HDMI No output Exclude :Connect first Display HDMI interface, Re connect the power to restart the normal. -13-

3 10. Remote control multimedia operation USB interface to access U disk,this machine recognizes the following automatic entry USB interface remote control operation Power switch 2. Main interface shortcut key(usb interface is not meet U disk,press this key will enter the system Settings) 3. Menu key 4. The left and right sides key and Fast forward and rewind 5. Up and down select key 6. OK key 7. Suspend key 8. Return key 11. Firmware upgrade Upgrade firmware COPY The root directory of U, Access USB interface, Restart the power supply, System to detect the firmware will automatically upgrade, After the restart to restart immediately after the restart U disk,delete U disk upgrade files on PC,Otherwise would recognize U disk will repeat the upgrade. Note :In the process of upgrading, please do not cut off or restart Functional characteristics Vehicle mounted WIFI high definition push device, Device connected via WIFI, Output audio and video signal,as well as the HDMI HD signal on the vehicle mounted display. No need to install any application,simple and convenient to use. The device navigation, video content synchronization on the screen, Achieve small screen to large screen sharing. Support for simultaneous online navigation,get the location, Online music, video multimedia playback,play online game function. Can also be no need to connect the network, Wireless high definition push through device WIFI connection, Pictures, music and video of the device can be synchronized to the display device. WIFI support: IEEE a/b/g/n, Band limit:2.4~ GHz Band or ~ GHz Band. Support wireless connectivity standards; WiFi AirPlay & Miracast/ Allsharecast/Screen Mirroring/DLNA,Compatible Android \IOS system. Audio and video RCA connector output ;HDMI(Maximum support 1080P)HD output. Analog output:cvbs,ypbpr,rgb, LR(audio frequency), choice PAL/NTSC Standard. Digital audio and video output: HDMI output 480p/i; 576p/i; 720p/i; 1080p/i resolution. Support USB local upgrade, Online server upgrade,mobile phone upgrades and other software updating method, Be able to timely support to the latest mobile devices. Support local USB multimedia player,the multimedia player function can be operated by a remote controller or a backstage mobile phone. Support intelligent devices online navigation, Get the location. Online music,video multimedia play function,the online play game function,faster, smoother. Support 1 AV input function, the 3 way video output. Use power supply voltage : DC 10V-24V. Working environment temperature: -10C - 70 C. Product size:25(h)*78(l)*118(w) mm.

2. Preparation before use 2.1 Hardware preparation 1.

Press the "OK" on the remote control key, enter the list of choices. 5G +2.

Wi-Fi Antenna Figure 1 Figure 2 Figure 3 3.

"OK" to play interface, press "pause" button on the remote control, can be off the air.

4 2. Preparation before use 2.1 Hardware preparation 1. Smart phone or table(please make sure your hardware supports Mircacast features or support for IOS devices). 2. Support AV input. 3. The 12V power supply interface of vehicle mounted display is detected. 3. Product composition 2. Press the "OK" on the remote control key, enter the list of choices. 5G +2.4G CAR WIFI DISPLAY IOS ANDROID DLNA Miracast RGB USB Player Wi-FI Mirror Converter Cable to AV-IN Wi-Fi Antenna Figure 1 Figure 2 Figure 3 3. According to the remote control of the direction key, choose the media file to play, press the "OK" to play interface, press "pause" button on the remote control, can be off the air. Remote control The power input line Figure 4 Figure 5 USB Support format VIDEO: AVI/MKV/MPG/MPEG/MP4 AUDIO: MP3 FLAC AAC Figure 1: Host Figure 2: Standard red yellow white AV interface Figure 3: WIFI AntennaX2 Figure 4: Remote control Figure5: ( The power input line & AV output terminal (RCA))

5 Menu P+/P- V+/V power 4. Installation method Schematic diagram AV-IN GND ACC+12V... (Option) RGB Output 6 7 HDMI Out 8.4 Video 1. Aspect Ratio Annotation: You can choose to display image length width ratio in this option. 2. TV System Annotation: Can set the display format TV,P represents a progressive scan,i is representative of interlaced scanning. 3. Scale Video Output to 90% Annotation: When there is a little bit can not be displayed around the video, Can click on this item to complete all display P 24Hz Annotation: If it is HDMI display can open this option. 9. Multimedia play 1. USB interface to access U disk,this machine recognizes the following automatic entry into the USB interface. -3- Camera On the vehicle display screen to switch the corresponding signal input: The 6 device shown in red yellow white cable received on the display on the cable. Or the 7 HDMI of the device is connected to the HDMI interface of the vehicle mounted display. Figure 1 on the device 12V power input(positive red, cathode black) Behind the car 12V power supply,yellow line control line. Above 3 devices S-AV :Red yellow white cable receive the external video input, If the connection is reversing, Figure 1 yellow line reversing control device. Video in Right Audio input Left Audio input Display Video out 2 Video out 3 4 U disk 5. Mirror image (IOS) IOS connection (Airplay Mirror),Take iphone5,ios 8 an example,look at the picture below. First open mobile wifi settings-wireless signal for connecting equipment; Call up control center to find AirplaySelect the device after the check image,mirror success! 3 IOS ANDROID 5G +2.4G CAR WIFI DISPLAY DLNA Miracast RGB USB Player 2 Telecomando The yellow line 1 ACC+12V GND

6 8.2 Network 1. WIFI Connection Annotation:We can set up the module to search the external network and connection. 2. Virtual AP Setup Annotation:Can set the network to connect a number of standards and restrictions. 1. Open the application 2. Open the Settings 8.3 Audio 1. Night Mode Annotation:This function is basically not used.(the next time you do the system Remove). 2. HDMI Output Annotation: If you use the module to support HDMI Clock to support HDMI output. 3. S/PDIF Output Annotation: If you use the module to support S/PDIF Click to support S/PDIF audio output. 4. Surround Sound Annotation: This effect is automatically run. 5. Lip Sync Annotation: This effect is automatically run. 3. Connect to the Wifi signal products 4.Slide the screen from the bottom up

$Select a product signals, sliding mirror button IOS Model description ( Image synchronization) iphone:4s\5\5c\5s\6\6 Plus... ipad:2\3\4\air\mini1\2.$

7 3. Enter the web page as the main interface is as follows. 8. System settings Select the gear icon on the phone interface,or do not meet U disk in USB interface, press the button can also be set into the interface The corresponding display screen is as follows. 5.Drag the dialog box, click the AirPlay 6.Select a product signals, sliding mirror button IOS Model description ( Image synchronization) iphone:4s\5\5c\5s\6\6 Plus... ipad:2\3\4\air\mini1\2... MAC: To check the official website of apple. 8.1 System 6. Mirror image (Android) Android native system for example (SAMSUNG Android 4.2 system) ; Open cell phone "Set" - "Display" - "wireless display", as shown in Figure

1.Open the phone Settings interface 2.To find more network of connections 3.

And then open the phone browser,input http://192.168.59.254.

manufacturers for Miracast Naming is not the same, Functional locations are not the

mirroring, Millet phone namedwlan display.

8 1.Open the phone Settings interface 2.To find more network of connections 3.Click on the screen sharing connections 2. And then open the phone browser,input Android original system connection method for the above,current mobile phone manufacturers for Miracast Naming is not the same, Functional locations are not the same,for example, Samsung models have called all share cast, Screen image, screen mirroring, Millet phone namedwlan display. After the success of the same screen,with WiFi Internet or mobile Internet without any conflict. 7. Mobile version of WIFI operating guidance 1. First use the phone WiFi connection device ID

Ord.code.: DW0140. Date: Page 1 / 7. AirPlay ios 6 & 7 or later NU_DW0140_000_ _EN

Ord.code.: DW0140. Date: Page 1 / 7. AirPlay ios 6 & 7 or later NU_DW0140_000_ _EN Ord.code.: DW0140 CAR Audio WiFi A/V mirror converter 1. Introduction AirPlay ios 6 & 7 or later This is a professional car standard WiFi A/V mirror converter of Smart Phone to Car Audio which transfers