POCKET FOLDER & SPECIALTY DIE CATALOG

Size: px
Start display at page:

Download "POCKET FOLDER & SPECIALTY DIE CATALOG"

Transcription

1 POCKET FOLDER & SPECIALTY DIE CATALOG for the graphic designer over 00 dies in stock Professional Presentation Folders A division of Lane Press of Albany

2 1 7 " x " " double pockets " x " " single pocket 2 8 " x "." double pockets " x ".2" double pockets or smaller no..2 " x " " double pockets " x " Tri-fold " center position file tab." to.7" fold out panel " double pockets or smaller no " x 1"." double pockets. 1." x " Expansion " double pockets." expansion spine.2" expansion pockets &.2 " x " " single pocket " x " Tri-fold " single center pocket " x "." single pocket. 8.2" x " 2." single pocket

3 1 1. " x." " single pocket " x "." single pocket (right side) curved front panel. This style is particularly effective using Duplex cover " x " " single pocket " x " Expansion " double pockets.2" expansion spine,." expansion pockets & " x." Expansion." double pockets." expansion spine.2" expansion pockets &.2..." x " Expansion " double pockets.7" expansion spine,.187" expansion pockets no " x " Expansion " single pocket.7" expansion spine, pocket &.7.7" x " " double pockets (2 up die -2" apart) " x " " double pockets " x " Tri-fold Expansion 2.7" single center pocket.2" expansion spines, pocket & " x " " double pockets." x " file tab (." from top of back panel). 2 " x " " double pockets (2 dies)

4 " + " + " x " Tri-fold Expansion 2.7" & 2." center expansion pockets.2" expansion spines no " x 10"." double pockets " +.2" x.7" 18.2" x " continuous pocket.7 " x " " double pockets " +.7" x.7".7" full length right." double pockets left.7..7." x 1"." single pocket " +." x " Expansion.7" double pockets.7" right pocket expansion." expansion spine.7" full length reinforced " x 10" 2." double pockets " x 1" 2." single pocket no 1 2. " x " " single pocket rounded corner on pocket 0.." x " " double pockets " x " " double pockets

5 " x " " double pockets " x " Expansion " double pockets.2" expansion spine, pocket & left normal " x " " double triangle pockets." + " x.7" Envelope/Folder." expansion sides round corner on front.".. " +.7" x "." double pockets.7" full length reinforced - left pocket.7..7 " x " Expansion." double pockets 1" expansion spine,." expansion pockets & " x 1" " double pockets 1." x." " double pockets " x 1" Expansion " double pockets 1" spine,." expansion pockets &. 1 " x " " double pockets 2 " x " Expansion " double pockets.87" x " file tab on left body 1" from top.2" expansion spine, pocket & left normal.2 8 " x "." double pockets 1.87" x." front window.

6 " x " 1.7" single pocket no " x " " double curved corner pockets " x ".7" double pockets.7.2" x.7" " x 7" side pockets, rounded tops " x " " double pockets (2 up die.2" apart).2" x "." continuous pocket double wide score on spine & pocket " x " " double pockets.7" x 10"." double pockets 10.. " x "." x " single pocket on both sides of pocket." x.7".2" double pockets " x "." single pocket angle cut on pocket & front cover. " x " " single pocket for cover

7 1. 7." x "." double pockets. " x ".7" x 10.2" side pocket (either side) round top " x 10"." double pockets on pockets " x.7" Tri-fold " x 8.87" single pocket File tab full-length, either side no " x." " single pocket (2 up die 1" apart). " x.7" Tri-fold " single pocket both sides of pocket.7 70 " x.2" " double pockets.2 " x " " x 8.2" side pockets, round tops " x " Tri-fold 2.7" center pocket no 2.7 " x ".7" single arched pocket " x ".7" x 8.2" side pockets, round tops " x 10" 2.87" double pockets (2 up die-chop cut)

8 7 " x "." double angled pockets " x.7" Envelope " x "." double angled pockets no..87" x " 2." tapered double pockets 2. 7." x " " single pocket for cover. 81 " x " 2." double pockets " x " Expansion " double pockets.2" expansion spine." expansion pocket & (2 dies)..87" x " Tri-fold Expansion." expansion spines 2." double pockets center pocket no on right pocket " x " Envelope." expansion spine & pocket " x 8." " single pocket no " x " Envelope." expansion spine & pocket " x " " single pocket 8

9 8. 1." x." " single pocket. " x " 1." single round pocket " x.7" " single pocket.7." x " Full length." file tab " double pockets 87 " x "." double pockets no.." x " " double pockets. x " file tab." from top of back panel. 88 " x " " side pocket with angle cut " x " 8" to " pocket and flap with locking closure " x " 2" single round pocket 2 " x " Expansion." double arched pockets.2" expansion spine " x " 2." single round pocket 2..2 x.2" Tri-fold

10 " x "." double pockets.7" full length right rolodex card on left pocket..7 " x " Tri-fold " double pockets 8 10 " x.7" curved " to.2" pocket.7 " x "." double pockets " x " Expansion " double pockets.2" expansion spine." expansion pockets &. " x " " double pockets " x " " single pocket no (2 up die 1.7" apart)." x " " double pockets " x " Tri-fold circle tab " double pockets + " single pocket " x " curved.2" to 2.7" pocket (either side) " x 10" " double pockets 10 " x " angled." to 2." pocket

11 " x " Tri-fold " triple pockets on outside pockets " x." " single pocket. 0.7 " x.7" Tri-fold 2" triple pockets no.7 2.7" x.2" " single pocket tapers down to 1.2" ( up die) outside inside 7. " x " Tri-fold " single pocket " x.7" Expansion.2" double pockets." expansion spine " x " " single pocket no ( up die).87 8 " x.2" with." x.2" file tab on right body.2" double pockets left pocket rolodex card " x " double." vertical pockets. 8.2" x.7" Tri-fold." single pocket 1.7" x 1.7" window on front cover no " x ".2" single pocket.2 " x " Tapered corner on top front of folder " single pocket

12 1 " x " Expansion." single pocket on left." expansion spine 2" foldover flap with holes.. 7 " x "." single pocket " x " one " pocket on left one 8" pocket on right two thin oval brochure cuts.2" wide on left pocket 8." x " Expansion " double pockets.7" expansion spine.7" expansion pockets & " x "." double pockets " x." file tab centered. 10." x " Expansion.7" round corner double pockets.2" expansion on spine, " right pocket & tab 1" X " reinforced tab on body " x "." double pockets right pocket is." wide.. " x " Tri-fold with locking tab." double pockets left pocket. " x " " single pocket " x " vertical pocket " x "." double round corner pockets " + " + " x " Tri-fold Expansion " triple pockets." left expansion spine.2" right expansion spine " x.7" Expansion " single pocket.2" expansion spine.7

13 " x.7" " double pockets " x." file tab right pocket all rounded corners left pocket.7. " x " Expansion." double pockets.2" expansion spine " x " Tri-fold." double pockets." expansion spine on " foldover..." x ".7" single pocket (2 up die) " x.7" Expansion.7" double pockets." expansion spine.2" expansion pockets & tabs 1" x.7" full length foldover tab on right body 1" x 7" foldover tab on left body " x " Tri-fold " single right pocket with half circle head 12 7 " x " 7" single pocket tapers to.". 7 7" x " 2." double pockets " x " " single right pocket.7" x " 2.2" single pocket " x 1." " double pockets 1. " x " Tri-fold " single pocket 1

14 " x "." x.2" file tab." double pockets. " x " Tri-fold Expansion." expansion spines & pocket.7" single center pocket no " x " 2.7" double pockets 2.7 " x 1" Expansion " double pockets." expansion spine,.2" expansion pockets & tabs " x " 7" single pocket, doglegs down to 2.2" " x." Envelope.7" expansion spines & (2 up) " x " " double pockets " x " Expansion " double pockets.2" expansion spine, right pocket & left normal " x " " double pockets. " x " " double pockets, dogleg on left pocket " x " " vertical pocket " x " Expansion " double pockets 1." expansion spine,.7" expansion pockets &.7 1

15 " x " " double pockets reinforced are length of body " x " Tri-fold." single pocket, center perf on pocket fold ideal for business reply card " x " " & " vertical pockets.7.7" x " angled." to." pocket.. 1.7" x " Expansion Full length.7" file tab " x " double pockets." expansion spine..7 1." + x.7" File folder Three scores in center.02" apart." x " file tab on front." x 7.7" tab on back.. x x " x " Expansion " double pockets." expansion spine.2" expansion pockets &.2." x " Envelope/Folder (2 up) " x " Tri-fold " single pocket " x " 0" to " double pockets brochure slits each pocket " x " " single pocket " x " curved side pocket.2" x.".2" pocket. 1

16 " x " Expansion." vertical pockets.2" center expansion spine " x " " x " angled single pocket " x " Expansion " vertical pocket.187" expansion spine &.187 " x " " double continuous pocket score " x "." double pockets. " x " Expansion Tri-fold..7" &.2" expansion spines " triple pockets w/." expansions w/." expansion " x " Expansion " double pockets.7" expansion spine, right pocket & left normal.7.7.7" x " Tri-fold " single pocket " x " Envelope " single glued pocket die cut windows half moon BC slit cut-out for thumb pull " x " Tri-fold " double pockets 17 " x 1." 7" x." single pocket " x " 7.87" stair step double pockets

17 " x " Expansion 8.87" side pocket." expansion spine, pocket & " x " " double pockets " x.7" 2 up File Folder. x.2" file tabs.7.7 " x " Expansion " double pockets.2" expansion spine " x " " vertical pocket " x " Tri-fold " center pocket no " x "." left side pocket.7" right side pocket..7.87" x " Full length.2" vertical pocket with angle cut " x 1" Envelope " flap 1." Envelope with 2.7" fold in flaps " x " Tri-fold " double pockets " x " Tri-fold w/ right 2.2" pocket and center pocket diecut outline of people

18 " x " Roll fold " pocket right side roll fold, finished size "x ".7" x." Envelope half moon cutouts 1" side & bottom " x 1"." double pockets 1 " x 1." Envelope.7" top & bottom " x " " double round corner pockets " x " " single angled pocket 1." x.7"." double pockets full length reinforced both sides " x "." single pocket. 17 " x " Expansion " double pockets.2" expansion spine." x " file tab " x.7" Envelope half moon cutouts 1", side & bottom (2 up die 1" apart) " x " Tri-fold " center pocket overlapping panels with locking tab no " x " " single pocket 18

19 20 " x " " single pocket 2 " x " Tri-fold " single right pocket rolodex perf in right side panel 2.7 perf " x.2" Envelope half moon cutouts 1", side & bottom.2 " x " Expansion " vertical pocket.2" expansion spine & pocket 207 " x " 2." single pocket (2 up die 2.2" apart) " x " Expansion " pocket " x 8" vertical pocket.2" +.2" double expansion spine inside outside 21. " x " Tri-fold Expansion." expansion spines " pockets left & right. " x." CD pocket sides " x." " double pockets " x ".7" curved vertical pocket " x." " double pockets (2 up die." apart) " x " " single pocket

20 " x 8" 1" expansion." pockets w/ expansion on right " x.7" certificate holder " x " " double pockets.7 22 " x " " pocket for cover no 21 " x " Tri-fold " pockets left & right " x.7" Tri-fold.87" pocket " x." Box diecut window window " x " " vertical pocket " x 1" Envelope w/.7" double expansion " x " " curved double pockets 222 " x " Tri-fold." continuous pocket no diecut oval window. 228 " x ".7" continuous pocket.7 20

21 22. 2." x.2" Envelope half moon cutouts 1" side & bottom.2 " x " angled.2" to " pockets " x 10.2" Envelope " x " 2.2" vertical pocket " x "." round corner pockets.." x 8" Tri-fold." pocket no " x." " double pockets..7" x.2" Expansion Envelope.2" vertical pockets.2" expansion spine " x 1." " double pockets 1. " x " " vertical rounded pocket 2 " x " " single rounded pocket for cover 20 1" x " " single pocket for cover 1 21

22 " x.2".87" notched pocket.87.2." x 10.2" Envelope " x.7".2" vertical pocket.7 " x " Envelope/Folder with." x." file tab on right body " " x." Panel Brochure. 10" x 1" Envelope/ Folder with 1" x 2" flap 10" " x "." double pockets.2" vertical locking closure " x " Expansion " double pockets." expansion spine.2" expansion pockets & " x.7" Tri-fold " pocket " x " Tri-fold Expansion." expansion spines " center pocket.2" expansion pocket no " x " CD Jacket " x " " curved pocket 22

23 2 " x " Tri-fold.2" center pocket no.2 2 " x " flat with.2 expansion on " vertical pocket.2 2.2" x " Tri-fold.7" full-width pocket no " x " " curved pocket " x.2" Rollfold brochure 2 up.2" x.2" " vertical pocket " x "." curved pocket " x " w/ " half circle star diecut flap." pocket " x." Five Panel Brochure.7" expansion spines no. 7.." x.7" 7.2" angled double pockets " x 1.7" Envelope 1" gusset scores gusset 1.7 " x ".7" x 2." perf area 2 up (use for membership cards, coupons, passes, etc.)

24 " x " " pockets 10.2" x ".7" pocket " x " Expansion " rounded pockets.2" expansion spine.2 " x.2" " vertical pocket " x ".7" rounded pockets.7 " x.7" Expansion.7" expansion spine.2" pocket " x "." right pocket.2" left vertical pocket " x " 2.87" curved pocket.7 curved pocket " x." Expansion Tri-fold.7" pockets 1/8" expansion spine " x 10" Roll fold 7. right pocket " x " Tri-fold " curved pocket 1/8" expansion spine. 27 " x." Panel Brochure. 2

25 " x " " pocket for cover." x." Envelope CD / DVD mailer " x " Door hanger " pocket 2 up die,." apart. " x " Envelope 1." gussets " x " roll-fold 2.2" pocket no 2.2 " x " double." vertical pockets. 280 " x."." pocket.. 28 " x "." curved pocket " 7." x " Tri-fold " pocket " x " Tri-fold." pocket." expansion spine no " x ".87" pocket.2" x " Tri-fold " pocket.87 2

26 28 " x." " curved pocket. 2 " x " Expansion.2" expansion spine " pockets.2" 20 2 " x " Expansion." pocket.2" brochure slits.2" expansion spine..2" " x " 1." pocket " x " Expansion " pocket.2" expansion spine & pocket " x " " pocket " x " " rounded pockets." brochure slit.7" x " " pockets 2 " x " Panel no Other specialty die-cutting available 2.2 STOP.2" x.2" Gift Card Holder 1.7" pocket no Annual Golf Outing or other Fund Raiser? Make your brochures or invitations stand out...with a CUT-out. See the back cover for more inspiration... 2

27 Index size die # size die #.2 x x 10.7 x 178, 27.7 x 1.7 x 22.7 x.2.87 x 100, 1.87 x x 80, 17 x 81 x 87 x x 2, 2, 2, 7, 8, 88, 1,, 18, 1, 201, 21, 2, 27, 2 x. 1,.2 x x x.7. x x 10. x.7 8, 2, 2. x x x. 210 x x 1. x.. x. 8. x x 1. x 0, 10, x 28.7 x 1.87 x 2 x 1 x. 27 x x 2, 10, 10, 2, 2, 2 x.7 7 x x 202 x 1.2 x x x. 20. x 2.2 x. 2.7 x 10 8, 2.7 x x x 8 7 x 10 7 x 12, x 7. x x x 10 1 x. x 20 x, 1, 2,,, 71,, 0, 222, 22, 2 x.2 x x, x x x x x x 1,, 1, 1, 17, 22, 20 x.7 22, 27 x 10, 20 x 1 1, 12 x x x x 21, 20, 282 x 8, 207 x 0 x 28 x. 280 x 7, 7, 107, 108, 1, 10,, 17, 21, 2 x.2 8 x.7, 8, 0, 12 x 1, 2,,,, 7, 8,, 18, 1, 20, 2,,, 7, 8,,, 7, 70,,,, 10, 10,, 2,,,,, 1, 1, 1, 1, 1, 17, 18, 10,, 1, 1, 18, 12, 17, 172, 17, 177, 17, 180, 181, 18, 18, 188, 1, 18, 208, 2, 21, 227, 228, 21, 2, 2, 21, 22, 22, 2, 27, 270, 27, 28, 287, 21, 22 x. 1, 28 x x 28.2 x 7.2 x x 2, 288

28 size die # size die #. x.7. x 8, 17. x 10, 17, 21, 28, 0, 8, 1, 7,2,, 1, 18, 20. x 1,. x x x x, 7, 1.87 x x.7 8, 1 10 x 7, x x x 10.2 x x 1 1 x 7 x 0 x 2 x 2 1 x 20 CD Holders, 21, 2 Certificate 22 Holder Envelope/ Folders Expansion Folders, 77, 78, 7, 1, 1, 17, 18,,1, 200, 20, 20, 221, 22, 20, 28, 27, 28, 2, 28, 278, 28, 28 10, 1, 1, 20, 21, 2, 2, 28, 1, 2,,,, 7, 77, 78, 82,,, 7, 1,, 8,, 12, 1, 1,, 12, 1, 1, 1, 1, 10, 1, 170, 172, 177, 181, 188, 17, 208, 2, 21, 217, 28, 20, 21, 2, 2, 270, 27, 287, 20, 21, 2 File Folders,1, 1, 182, 28, 2 File Tabs,18, 27, 28,, 2, 8, 2,, 7, 101, 8,, 1, 1, 17, 1, 1, 1, 18, 1, 17, 28, Specialty, 2, 2, 27, 2, 27, 2 Brochures Specialty Folders Tri-Fold & Multi-Panel 1,,, 7, 70, 101, 0, 1,, 10, 1, 17, 18,, 18, 1, 170, 17, 178, 18, 18, 10,, 1, 18, 220, 21, 2, 22, 278, 2, 28, 287, 288, 2,, 2, 2,, 8,, 82,, 101, 10, 10, 0, 1,,, 1,, 1,,, 1, 18, 177, 178, 17, 18, 18, 1, 208, 2, 21, 222, 27, 2, 2, 22, 270, 27, 27, 287, 288, 2...more of our specialty die-cutting Table Tents and Pyramids Door Hangers You may also want to consider direct-mail marketing...your message makes the CUT! Conference Proceedings CD Envelopes & Jackets Professional Presentation Folders A division of Lane Press of Albany plus, we have circles, squares, ovals, stars and much more...give us a call Kairnes Street Albany, NY 20 Phone: (18) 8-12 Fax (18) 8-2

MOHAWK DIMENSIONAL 8 MOHAWKCONNECTS.COM

MOHAWK DIMENSIONAL 8 MOHAWKCONNECTS.COM MOHAWK DIMENSIONAL A growing product line of perforated and scored packaging, promotional, photo and presentation products for short run digital printing made from premium papers and synthetic substrates

More information

A Global Leader in Finishing Solutions

A Global Leader in Finishing Solutions A Global Leader in Finishing Solutions Integrated Web Finishing Systems Presentation Copyright 2015 Integrated Web Finishing Systems. All rights reserved. Brand and product names are Trademarks or Registered

More information

EngView Library of Standard Packaging Designs ECMA INDEX Folding Carton

EngView Library of Standard Packaging Designs ECMA INDEX Folding Carton EngView Library of Standard Packaging Designs Folding Carton Last update: October, 2000 Copyright 2000 EngView Systems Corp. ECMA A112 ECMA A113 ECMA A114 ECMA A115 Inverted Reverse Inverted Reverse with

More information

meaden Special Shaped Punches & Dies Information English Version

meaden Special Shaped Punches & Dies Information English Version Special Shaped Punches & Dies Information English Version 210 West 83rd Street Burr Ridge, Illinois 60521 Telephone: 630/655-0888 FAX: 630/655-3012 Internet www.printing.com How to Order Specials Clearance.515"

More information

MOHAWK DIMENSIONAL MOHAWK DIMENSIONAL

MOHAWK DIMENSIONAL MOHAWK DIMENSIONAL A diverse product line of perforated and scored packaging, promotional, photo and presentation products for short run digital printing made from premium papers and synthetic substrates for superior print

More information

the YES packaging catalog > promotional packaging > custom printing > package design and engineering > digital packaging

the YES packaging catalog > promotional packaging > custom printing > package design and engineering > digital packaging the YES packaging catalog > promotional packaging > custom printing > package design and engineering > digital packaging Over a century of combined print and packaging experience. 100 years is a long time,

More information

CONTENTS MY STYLE. MY UNIQUE PORTFOLIO SERIES PERSONAL ORGANIZER SERIES LEATHER GOODS SERIES 19

CONTENTS MY STYLE. MY UNIQUE PORTFOLIO SERIES PERSONAL ORGANIZER SERIES LEATHER GOODS SERIES 19 excellent class leather handicraft TM CONTENTS SERIES 03-12 PERSONAL SERIES 13-18 LEATHER GOODS SERIES 19 MY STYLE. MY UNIQUE P o r t f o l I d A41001 A4-shape Tri-fold Portfolio with document pockets,

More information

* For stacking height of other products within the ranges please refer to modular compatibilty charts

* For stacking height of other products within the ranges please refer to modular compatibilty charts WHY CHOOSE R-KIVE FROM FELLOWES? Fellowes began with archival storage products over 90 years ago and is a market leader in branded archival storage in USA, Canada and the UK. The extensive range includes

More information

Commercial Envelopes Regular

Commercial Envelopes Regular STOCK ENVELOPES The following pages list most of the envelopes commonly stocked. Commercial Envelopes Regular Air Mail Envelopes 5 Commercial Envelopes Standard Window Document Envelopes 6 Booklet Envelopes

More information

Custom Printing Pricelist

Custom Printing Pricelist J & S Business Products, Inc. Custom Printing - 011 Pricelist Call Today 877--09 Custom Printing - 011 Pricelist Questions? Need specific quote? Like to start an order? Call our office at 1-877--09 or

More information

.75 DOOR ACCESSORIES. Concealed Screw Surface Bolts. 4" Concealed Screw Surface Bolt. 6" Concealed Screw Surface Bolt. 8" Concealed Screw Surface Bolt

.75 DOOR ACCESSORIES. Concealed Screw Surface Bolts. 4 Concealed Screw Surface Bolt. 6 Concealed Screw Surface Bolt. 8 Concealed Screw Surface Bolt Concealed Screw Surface Bolts 4" Concealed Screw Surface Bolt 8527 6" Concealed Screw Surface Bolt 8528 8" Concealed Screw Surface Bolt 8529 12" Concealed Screw Surface Bolt 8530.75 Mortise Strike Lip

More information

RATHETING TAPS AND DIES SETS RATCHETING TAPS & DIES Pc. Ratcheting Tap and Die Set SAE

RATHETING TAPS AND DIES SETS RATCHETING TAPS & DIES Pc. Ratcheting Tap and Die Set SAE RATHETING TAPS AND DIES 82811-65 Pc. Ratcheting Tap and Die Set SAE 82800 Large Tap and Die Ratcheting T Wrench 82801 Large Locking Tap Adapter 82802 Large Hex Die Adapter 3881 Medium Tap and Die Ratcheting

More information

This is a one-week excerpt from the Starfall Kindergarten Mathematics Teacher s Guide. If you have questions or comments, please contact us.

This is a one-week excerpt from the Starfall Kindergarten Mathematics Teacher s Guide. If you have questions or comments, please contact us. UNIT 6 WEEK 13 This is a one-week excerpt from the Starfall Kindergarten Mathematics Teacher s Guide. If you have questions or comments, please contact us. Email: helpdesk@starfall.com Phone: 1-888-857-8990

More information

Trimble FabShop RELEASE NOTES

Trimble FabShop RELEASE NOTES RELEASE NOTES Trimble FabShop Please print and read this entire document. This document contains summary information on new features, late-breaking product information, updates, and troubleshooting tips

More information

Aerospace Sheet Metal Design

Aerospace Sheet Metal Design CATIA V5 Training Foils Aerospace Sheet Metal Design Version 5 Release 19 January 2009 EDU_CAT_EN_ASL_FI_V5R19 1 About this course Objectives of the course Upon completion of this course you will be able

More information

Introduction. Using Shapes. Word 2010 Working with Shapes. Video: Working with Shapes in Word To Insert a Shape: Page 1

Introduction. Using Shapes. Word 2010 Working with Shapes. Video: Working with Shapes in Word To Insert a Shape: Page 1 Word 2010 Working with Shapes Introduction Page 1 You can add a variety of shapes to your document including arrows, callouts, squares, stars, flowchart shapes and more. Want to set your name and address

More information

2nd Grade. 2D Shapes - Part 1 Angles and Sides. Slide 1 / 117 Slide 2 / 117. Slide 3 / 117. Slide 4 / 117. Slide 6 / 117.

2nd Grade. 2D Shapes - Part 1 Angles and Sides. Slide 1 / 117 Slide 2 / 117. Slide 3 / 117. Slide 4 / 117. Slide 6 / 117. Slide 1 / 117 Slide 2 / 117 2nd Grade Geometry Presentation 1 2015-11-30 www.njctl.org Slide 3 / 117 Table of ontents Presentation 1 2 Shapes - Sides and ngles - Part 1 2 Shapes - Part 2 Lab: 2 Shapes

More information

Multimedia 2 Desktop Publishing Project: Create Your Own Business

Multimedia 2 Desktop Publishing Project: Create Your Own Business Multimedia 2 Desktop Publishing Project: Create Your Own Business Examples Sheet Note that these examples do not necessarily meet the guidelines in your grade sheet. They are here for reference purposes

More information

CHAPTER 6 THE SUITES VECTOR DRAWING SUITE

CHAPTER 6 THE SUITES VECTOR DRAWING SUITE CHAPTER 6 THE SUITES There are two additional tool bar suites for Project Designer sold separately as add-on modules. These are the Vector Drawing Suite, and the Pattern Modeling Suite. This section will

More information

Aerospace Sheet Metal Design

Aerospace Sheet Metal Design CATIA V5 Training Foils Aerospace Sheet Metal Design Version 5 Release 19 January 2009 EDU_CAT_EN_ASL_FF_V5R19 1 About this course Objectives of the course Upon completion of this course you will be able

More information

Classic ipad/tablet Stand Display

Classic ipad/tablet Stand Display Classic ipad/tablet Stand Display The Classic ipad Stand is a versatile and functional stand that can be used with ipad 2 and later and Samsung Galaxy 10.1. The angle can be adjusted and the ipad can be

More information

Print-Ready PDF Specifications

Print-Ready PDF Specifications The key to ensuring your job will print as expected, in the time frame expected, is all components of a job be submitted as independent print-ready PDF files. A print-ready PDF is a file that must meet

More information

,

, DIGITALPRESS COLOUR PRINTING/ BASE PRICES Letter Legal Tabloid 1-9 1.04 1.45 1.89 10-49 0.95 1.35 1.69 50-99 0.85 1.30 1.59 100-499 0.75 1.25 1.49 500-999 0.65 1.15 1.29 1,000 + 0.59 0.99 1.19 COLOUR PRINTING/

More information

Visualising Solid Shapes

Visualising Solid Shapes VISUALISING SOLID SHAPES 2 7 7 Visualising Solid Shapes Chapter 15 15.1 INTRODUCTION: PLANE FIGURES AND SOLID SHAPES In this chapter, you will classify figures you have seen in terms of what is known as

More information

9 Start button Start a job, depending on which mode is selected. 10 Fax button Send faxes. 11 Back button Return to the previous screen.

9 Start button Start a job, depending on which mode is selected. 10 Fax button Send faxes. 11 Back button Return to the previous screen. Quick Reference Use the To 9 Start button Start a job, depending on which mode is selected. > Settings > > Paper Menu > > Paper Size/Type > Learning about the printer Using the printer control panel 10

More information

Made in India. Leather Collection. Catalogue 2017 LEATHER. - lamps & small furniture - business gifts - office accessories

Made in India. Leather Collection. Catalogue 2017 LEATHER. - lamps & small furniture - business gifts - office accessories Leather Collection Catalogue 2017 LEATHER - lamps & small furniture - business gifts - office accessories Updated April 2017 Technical characteristics Examples of customisation Leather Environmentally-friendly

More information

Shippensburg Math & Computer Day 2013 Individual Math Contest

Shippensburg Math & Computer Day 2013 Individual Math Contest Shippensburg Math & Computer Day 2013 Individual Math Contest 1. Row n of Pascal s Triangle lists all the coefficients of the expansion of (1 + x) n. What is the smallest value of n for which the sum of

More information

BIG SAVINGS Available thru February 29, 2016

BIG SAVINGS Available thru February 29, 2016 BIG SAVINGS Available thru February 29, 2016 * In the unlikely event we do not have inventory you may choose a designated item of equal or greater value. SQUARE CORNER CUSTOM DECALS Durable & Economical

More information

Tutorial 1 Engraved Brass Plate R

Tutorial 1 Engraved Brass Plate R Getting Started With Tutorial 1 Engraved Brass Plate R4-090123 Table of Contents What is V-Carving?... 2 What the software allows you to do... 3 What file formats can be used?... 3 Getting Help... 3 Overview

More information

ABCs of Direct Mail. Tips for More Effective Marketing Publications

ABCs of Direct Mail. Tips for More Effective Marketing Publications ABCs of Direct Mail Tips for More Effective Marketing Publications ABCs of Direct Mail 2 Introduction Direct mail is a growing business and everyone is eager and excited to jump on board. The problem is

More information

Shippensburg Math & Computer Day 2013 Individual Math Contest Solutions

Shippensburg Math & Computer Day 2013 Individual Math Contest Solutions Shippensburg Math & Computer Day 2013 Individual Math Contest Solutions 1. Row n of Pascal s Triangle lists all the coefficients of the expansion of (1 + x) n. What is the smallest value of n for which

More information

everyday essentials for real estate

everyday essentials for real estate everyday essentials for real estate www.merrillshop.com/remax 800.344.2902 Business CardS Business cards may be the most compact tool in your real estate marketing arsenal, but they can still have a huge

More information

Big Bang. Impact-protective thin and light case For ipad mini and ipad mini with Retina display. Setup Guide

Big Bang. Impact-protective thin and light case For ipad mini and ipad mini with Retina display. Setup Guide Big Bang Impact-protective thin and light case For ipad mini and ipad mini with Retina display Setup Guide Contents English..........................................3 www.logitech.com/support/big-bang-mini

More information

ALLPLASTICS ENGINEERING PTY LTD P: (02) F: (02) E:

ALLPLASTICS ENGINEERING PTY LTD P: (02) F: (02) E: Counter Standing: SINGLE, DUAL AND MULTI-COMPARTMENT LEAFLET HOLDERS 1/3 A4 SIZE STANDS C104 2C112 2C110 3C104 3C110H 1 /3 rd A4 104mm x 32mm Double DL & 1 /3 rd A4 112mm x 32mm x 2 2 compartment DL 1

More information

Loading paper in Trays 1-3 see page 2. Loading paper in the Multi-Purpose Tray see page 6. Using custom size paper see page 8.

Loading paper in Trays 1-3 see page 2. Loading paper in the Multi-Purpose Tray see page 6. Using custom size paper see page 8. Phaser 6200 Color Laser Printer Trays This section covers: Loading paper in Trays 1-3 see page 2. Loading paper in the Multi-Purpose Tray see page 6. Using custom size paper see page 8. For a list of the

More information

TRAINING GUIDE WCS - VIEW MANAGER - PART-2

TRAINING GUIDE WCS - VIEW MANAGER - PART-2 TRAINING GUIDE WCS - VIEW MANAGER - PART-2 Mastercam Training Guide Objectives The learner will create the geometry and toolpaths for WCS-Part-2. This Lesson will cover the following topics: Create a 3-dimensional

More information

LITERATURE HOLDERS Acrylic & Vinyl

LITERATURE HOLDERS Acrylic & Vinyl LITERATURE HOLDERS Acrylic & Vinyl Literature Solutions We stock a full-line inventory and offer a wide variety of styles and sizes of literature holders made from different materials that include Slant

More information

Volume 15 January 2013

Volume 15 January 2013 Volume 15 January 2013 CONTENTS AT A GLANCE PAGE 4-12...RATE FOLD APPENDUM, NEW PRICES PAGE 13...DOMESTIC EXTRA SERVICES PAGE 14-21...COMMERCIAL LETTERS, CARDS, FLATS AND PARCELS MOVE UPDATE PAGE 22-26...FOLDED

More information

Creating a Text Frame. Create a Table and Type Text. Pointer Tool Text Tool Table Tool Word Art Tool

Creating a Text Frame. Create a Table and Type Text. Pointer Tool Text Tool Table Tool Word Art Tool Pointer Tool Text Tool Table Tool Word Art Tool Picture Tool Clipart Tool Creating a Text Frame Select the Text Tool with the Pointer Tool. Position the mouse pointer where you want one corner of the text

More information

Geometry 10 and 11 Notes

Geometry 10 and 11 Notes Geometry 10 and 11 Notes Area and Volume Name Per Date 10.1 Area is the amount of space inside of a two dimensional object. When working with irregular shapes, we can find its area by breaking it up into

More information

END-TAB FILE FOLDERS. Custom Fastener Positions for Folders, Dividers and Filebacks Point Double Ply End Tab 9 1 /2" H x 12 1 /4" W (Manila)

END-TAB FILE FOLDERS. Custom Fastener Positions for Folders, Dividers and Filebacks Point Double Ply End Tab 9 1 /2 H x 12 1 /4 W (Manila) END-TAB FILE FOLDES Custom Fastener Positions for Folders, Dividers and Filebacks 8 SFSA EFSA 5 6 7 0FB 05FB Point Double Ply End Tab (Manila) 00 0 BM BM- 00 0 BM- Barkley compatible) Point Single Ply

More information

how to send mail through ccsd

how to send mail through ccsd how to send mail through ccsd HOW TO SEND MAIL THROUGH CCSD TABLE OF CONTENTS: INTER-OFFICE MAIL...3-4 PROPER ADDRESSING...5-8 USPS FIRST CLASS MAIL...7 USPS PRE-SORT FLATS...9 NON-PROFIT/ PERMIT #1 MAIL...

More information

60th ANNUAL HIGH SCHOOL HONORS MATHEMATICS CONTEST

60th ANNUAL HIGH SCHOOL HONORS MATHEMATICS CONTEST 60th ANNUAL HIGH SCHOOL HONORS MATHEMATICS CONTEST April, 017 on the campus of the University of California, San Diego PART I 5 Questions Welcome to the contest! Please do not open the exam until told

More information

Digital Storefront. Go to log in screen either through Send to Copy Center or

Digital Storefront. Go to log in screen either through Send to Copy Center or Digital Storefront Welcome to Digital Storefront. This new product is being introduced by the UC Copy Center and will allow users to send all of their print jobs electronically as well as being automatically

More information

Do Now # 1 Label the Photoshop Interface.

Do Now # 1 Label the Photoshop Interface. Class Warmup AVTECH Do Now # 1 Label the Photoshop Interface. The Menu Bar The Options Panel The Canvas The Navigator Panel The History Panel Button The Workspace Button The Tool Bar The Layers Panel The

More information

Production materials. National Film Board of Canada

Production materials. National Film Board of Canada 3.1 VHS box 3.3 VHS jacket 3.5 VHS gumbo jacket 3.7 DVD box 3.9 DVD disc 3.10 CD-ROM disc 3.11 Package contents 3.12 One-sheet Bilingual version 3.14 One-sheet Unilingual version 3.16 One-sheet and presentation

More information

Loading paper and specialty media Learning about the printer. Stop all printer activity. 7 Back button Return to the previous screen.

Loading paper and specialty media Learning about the printer. Stop all printer activity. 7 Back button Return to the previous screen. Quick Reference Use the 6 Stop or Cancel button To Stop all printer activity. Loading paper and specialty media Learning about the printer Using the printer control panel 0 Use the 9 To Display View the

More information

Shutter Design. Standard Shutters

Shutter Design. Standard Shutters Shutter Design Revised: DEC. 2017 Standard Shutters Sunland Shutters builds all panels so that the top rail and the bottom rail are as close to the same size as possible. When ordering adjacent shutters

More information

SOLID PERFORMANCE, AT A GREAT PRICE

SOLID PERFORMANCE, AT A GREAT PRICE SOLID PERFORMANCE, AT A GREAT PRICE There is simply not enough time in the day to search the web, or call around looking for the best deal. You don t need to. Norton Metal is a comprehensive abrasive line

More information

Module 4A: Creating the 3D Model of Right and Oblique Pyramids

Module 4A: Creating the 3D Model of Right and Oblique Pyramids Inventor (5) Module 4A: 4A- 1 Module 4A: Creating the 3D Model of Right and Oblique Pyramids In Module 4A, we will learn how to create 3D solid models of right-axis and oblique-axis pyramid (regular or

More information

Release Highlights for BluePrint-PCB Product Version 3.0

Release Highlights for BluePrint-PCB Product Version 3.0 Release Highlights for BluePrint-PCB Product Version 3.0 Introduction BluePrint V3.0 Build 568 is a rolling release, containing defect fixes for 3.0 functionality. Defect fixes for BluePrint V3.0 Build

More information

Scroll through menus or move between screens and menu options. Increase the numeric value of an option or setting being displayed. Save settings.

Scroll through menus or move between screens and menu options. Increase the numeric value of an option or setting being displayed. Save settings. Quick Reference Learning about the printer Use the 5 Right arrow button To Scroll through menus or move between screens and menu options. Increase the numeric value of an option or setting being displayed.

More information

UNIT 7 Mensuration Activities

UNIT 7 Mensuration Activities UNIT 7 Mensuration Activities Activities 7.1 Tangram 7.2 Closed Doodles 7.3 Map Colouring 7.4 Euler's Formula 7.5 Square-based Oblique Pyramid 7.6 Klein Cube (3 pages) 7.7 Transforming Polygons 7.8 Tubes

More information

Table of contents. What is new in Advance Steel 2014 WELCOME TO ADVANCE STEEL USER INTERFACE ENHANCEMENTS... 6 MODELING JOINTS...

Table of contents. What is new in Advance Steel 2014 WELCOME TO ADVANCE STEEL USER INTERFACE ENHANCEMENTS... 6 MODELING JOINTS... Table of contents WELCOME TO ADVANCE STEEL 2014... 5 USER INTERFACE ENHANCEMENTS... 6 User interface 1: Customizable tool palette... 6 User interface 2: Collision check results... 7 User interface 3: Steel

More information

12 m. 30 m. The Volume of a sphere is 36 cubic units. Find the length of the radius.

12 m. 30 m. The Volume of a sphere is 36 cubic units. Find the length of the radius. NAME DATE PER. REVIEW #18: SPHERES, COMPOSITE FIGURES, & CHANGING DIMENSIONS PART 1: SURFACE AREA & VOLUME OF SPHERES Find the measure(s) indicated. Answers to even numbered problems should be rounded

More information

How to draw and create shapes

How to draw and create shapes Adobe Flash Professional Guide How to draw and create shapes You can add artwork to your Adobe Flash Professional documents in two ways: You can import images or draw original artwork in Flash by using

More information

GUNNAR GMC Dynamic Box-Making Templates Reference Guide

GUNNAR GMC Dynamic Box-Making Templates Reference Guide GUNNAR GMC Dynamic Box-Making Templates Guide by Jared Davis MCPF, GCF GUNNAR T1 Box-Making Tools With the optional, award-winning T1 scoring and creasing tool, the scope of a GUNNAR CMC can broaden beyond

More information

If you have any questions, please send them to me via at No phone calls please. Thank you.

If you have any questions, please send them to me via  at No phone calls please. Thank you. 2018 Stamford Downtown Events Printing Needs Stamford Downtown Five Landmark Square, Suite 110, Stamford, CT 06901 Fax 203-348-6857, annette@stamford-downtown.com In order to try to reduce our printing

More information

Describe Plane Shapes

Describe Plane Shapes Lesson 12.1 Describe Plane Shapes You can use math words to describe plane shapes. point an exact position or location line endpoints line segment ray a straight path that goes in two directions without

More information

BOXES / ALBUMS CD/DVD ALBUMS CAT. NO. HOLDS CASE SIZE GRAPHIC TRIM SIZE (HXW)

BOXES / ALBUMS CD/DVD ALBUMS CAT. NO. HOLDS CASE SIZE GRAPHIC TRIM SIZE (HXW) BOXES / ALBUMS CD/DVD ALBUMS CAT. NO. HOLDS SIZE GRAPHIC TRIM SIZE (HXW) CD2 2 50 6-1/16 H x 14-1/16 W CD4 4 50 6-1/16 H x 14-1/16 W CD6 6 50 6-1/16 H x 14-1/16 W CD8 8 50 6-1/16 H x 14-1/16 W CD10 10

More information

Wrought Iron Brochure

Wrought Iron Brochure Wrought Iron Brochure Page 2 Spikes 9211 24mm 125x63mm 9212 26mm 140x70mm 9213 28mm 170x85mm 126/B/6 20mm 80x45mm 126/B/7 25mm 125x64mm 126/B/8 38mm 140x80mm 9543 13mm 133x59mm 9542 14mm 153x70mm 9541

More information

DrawPlus X8. Quick Start Guide. Simple steps for getting started with your drawing.

DrawPlus X8. Quick Start Guide. Simple steps for getting started with your drawing. DrawPlus X8 Quick Start Guide Simple steps for getting started with your drawing. In this guide, we will refer to specific tools, toolbars and tabs. Use this visual reference to help locate them on the

More information

How to create shapes. Drawing basic shapes. Adobe Photoshop Elements 8 guide

How to create shapes. Drawing basic shapes. Adobe Photoshop Elements 8 guide How to create shapes With the shape tools in Adobe Photoshop Elements, you can draw perfect geometric shapes, regardless of your artistic ability or illustration experience. The first step to drawing shapes

More information

Today we will be exploring three-dimensional objects, those that possess length, width, and depth.

Today we will be exploring three-dimensional objects, those that possess length, width, and depth. Lesson 22 Lesson 22, page 1 of 13 Glencoe Geometry Chapter 11.1 3-D figures & Polyhedra Today we will be exploring three-dimensional objects, those that possess length, width, and depth. In Euclidean,

More information

SHAPE, SPACE and MEASUREMENT

SHAPE, SPACE and MEASUREMENT SHAPE, SPACE and MEASUREMENT Types of Angles Acute angles are angles of less than ninety degrees. For example: The angles below are acute angles. Obtuse angles are angles greater than 90 o and less than

More information

Strategy. Using Strategy 1

Strategy. Using Strategy 1 Strategy Using Strategy 1 Scan Path / Strategy It is important to visualize the scan path you want for a feature before you begin taking points on your part. You want to try to place your points in a way

More information

Instrument Prep & Pack Tables... Ergonomic/Hydraulic

Instrument Prep & Pack Tables... Ergonomic/Hydraulic Instrument Prep & Pack Tables... Ergonomic/Hydraulic KTW Medical offers the finest ergonomic solution with push button height adjustability. Designed to maximize productivity and reduce overexertion we

More information

Module 4B: Creating Sheet Metal Parts Enclosing The 3D Space of Right and Oblique Pyramids With The Work Surface of Derived Parts

Module 4B: Creating Sheet Metal Parts Enclosing The 3D Space of Right and Oblique Pyramids With The Work Surface of Derived Parts Inventor (5) Module 4B: 4B- 1 Module 4B: Creating Sheet Metal Parts Enclosing The 3D Space of Right and Oblique Pyramids With The Work Surface of Derived Parts In Module 4B, we will learn how to create

More information

Surface Area and Volume

Surface Area and Volume Surface Area and Volume Level 1 2 1. Calculate the surface area and volume of each shape. Use metres for all lengths. Write your answers to 4 decimal places: a) 0.8 m Surface Area: Volume: b) 1 m 0.2 m

More information

a 3-dimensional solid with a circular base and a curved surface that meets at a point

a 3-dimensional solid with a circular base and a curved surface that meets at a point q. Super Solids Whole Class or Small Group Geometric Vocabulary reproducible (2 per student) (pg. 20) Super Solids reproducible (pg. 24) Make photocopies of the Geometric Vocabulary (2 per student) and

More information

The World s Leading Stamping Die Design Software for AutoCAD!

The World s Leading Stamping Die Design Software for AutoCAD! DIE is a comprehensive suite of AutoCAD based software products designed to automate many facets of the stamping die design process. DIE software modules can operate independently to address specific design

More information

GRADE 1 SUPPLEMENT. March Calendar Pattern C7.1

GRADE 1 SUPPLEMENT. March Calendar Pattern C7.1 GRADE 1 SUPPLEMENT Set C7 Geometry: Describing 3-D Shapes Calendar Pattern Includes March Calendar Pattern C7.1 Skills & Concepts H identify, name, and describe 3-D shapes in isolation and in everyday

More information

If you have any questions, please send them to me via at No phone calls please. Thank you.

If you have any questions, please send them to me via  at No phone calls please. Thank you. 2019 Stamford Downtown Events Printing Needs Stamford Downtown Five Landmark Square, Suite 110, Stamford, CT 06901 Fax 203-348-6857, annette@stamford-downtown.com In order to try to reduce our printing

More information

(With effect from 1 October 2012)

(With effect from 1 October 2012) R R (With effect from 1 October ) st UK ISO 01: ISO 1: 1 2 3 7 9 11 13 1 1 17 1 19 1 117 1 11 1 1 9 13 1 1F 171 173 13 1 1 1 1 191 Clear Holder 1 Pocket, Transparent Colours Twin Poly Folder Clear Holder

More information

Flexi and Digi Packs Specification Booklet Design and Print

Flexi and Digi Packs Specification Booklet Design and Print Stebbing Recording Centre Ltd - Update 2018 Flexi and Digi Packs Specification Booklet Design and Print Templates in booklet are Adobe Illustrator based and to scale Contact Graphics: 0800 506 116 / graphic@stebbing.co.nz

More information

Filing and Storage Accessories

Filing and Storage Accessories Filing and Storage Accessories 1 Contents We make things easy to file so you ll find them easily! 02 File Covers 12 File Pockets & Wallets 16 Clips & Fasteners 20 28 30 Labels Archive Box Systems Accessories

More information

Product Catalog 2018

Product Catalog 2018 Product Catalog 2018 MODERN & CLASSIC DESIGN Modern design with straight lines became very popular in the last few years. Because of symmetrical shape same handle can be installed on left or right facing

More information

Estimate Detail by Process - Est All Inclusive Costs

Estimate Detail by Process - Est All Inclusive Costs Estimate Detail by - Est. 35125 All Inclusive s September 24, 218 Monday 7:3am Estimate Date: 9/24/218 Due Date: 9/24/218 Est #: 35125 Job #: Customer #: DALLASSYMPHO DALLAS SYMPHONY ASSOCIATION, INC.

More information

Franchise Marketing System 2018

Franchise Marketing System 2018 Franchise Marketing System 2018 Direct Mail Programs New Homeowner You determine the home value and the target area. We create three cards together. The cards are loaded into an automated mailing site

More information

Creating A Ticket Format

Creating A Ticket Format Creating A Ticket Format Have More Questions? 1. Log in to Administration. 2. Expand the Regional Information folder and click on the Ticket Formats icon. 3. In the Ticket Format field, right-click and

More information

Adobe Flash CS4 Part 1: Introduction to Flash

Adobe Flash CS4 Part 1: Introduction to Flash CALIFORNIA STATE UNIVERSITY, LOS ANGELES INFORMATION TECHNOLOGY SERVICES Adobe Flash CS4 Part 1: Introduction to Flash Fall 2010, Version 1.0 Table of Contents Introduction...3 Downloading the Data Files...3

More information

Unit 7: 3D Figures 10.1 & D formulas & Area of Regular Polygon

Unit 7: 3D Figures 10.1 & D formulas & Area of Regular Polygon Unit 7: 3D Figures 10.1 & 10.2 2D formulas & Area of Regular Polygon NAME Name the polygon with the given number of sides: 3-sided: 4-sided: 5-sided: 6-sided: 7-sided: 8-sided: 9-sided: 10-sided: Find

More information

WINDOW TECHNOLOGY ORDER CATALOG. Single & Double Hung Window Hardware

WINDOW TECHNOLOGY ORDER CATALOG. Single & Double Hung Window Hardware WINDOW TECHNOLOGY ORDER CATALOG Single & Double Hung Window Hardware Door Single Multipoint & Double Locking Hung Hardware System Solid Table of brass Contents handle & 45mm plate series 0. Constant Force

More information

CREATE A ROADMAP WITH A BOTTLE OF WINE

CREATE A ROADMAP WITH A BOTTLE OF WINE 1 CREATE A ROADMAP WITH A BOTTLE OF WINE 2 PLANNING AND DIGITISING YOUR OWN DESIGNS BERNINA Embroidery Software Designer Plus V5 and 6. PLANNING THE DESIGN. Good embroidery is the result of careful planning.

More information

If you have any questions, please send them to me via at No phone calls please. Thank you.

If you have any questions, please send them to me via  at No phone calls please. Thank you. 2017 Stamford Downtown Events Printing Needs Stamford Downtown Five Landmark Square, Suite 110, Stamford, CT 06901 Fax 203-348-6857, annette@stamford-downtown.com In order to try to reduce our printing

More information

Inventor 201. Work Planes, Features & Constraints: Advanced part features and constraints

Inventor 201. Work Planes, Features & Constraints: Advanced part features and constraints Work Planes, Features & Constraints: 1. Select the Work Plane feature tool, move the cursor to the rim of the base so that inside and outside edges are highlighted and click once on the bottom rim of the

More information

dia. grit type R type S eblend surface conditioning disc

dia. grit type R type S eblend surface conditioning disc QUICK CHANGE Discs blend Mini E Quick Change Flap Discs The Mini E flap discs are manufactured using the best zirconia abrasive on a heavy cloth backing. Mini E discs features a quick change system using

More information

PRESENTATION & STORAGE FOLDERS & CASES

PRESENTATION & STORAGE FOLDERS & CASES Edition 19 PRESENTATION & STORAGE FOLDERS & CASES Multi-disc Ring Binder Folders, Blu-Ray, DVD, CD Cases & Sleeves website: www.soundpack.com.au freecall: 1800 818 166 phone: 08 9249 4111 email: sales@soundpack.com.au

More information

INKSCAPE BASICS. 125 S. Prospect Avenue, Elmhurst, IL (630) elmhurstpubliclibrary.org. Create, Make, and Build

INKSCAPE BASICS. 125 S. Prospect Avenue, Elmhurst, IL (630) elmhurstpubliclibrary.org. Create, Make, and Build INKSCAPE BASICS Inkscape is a free, open-source vector graphics editor. It can be used to create or edit vector graphics like illustrations, diagrams, line arts, charts, logos and more. Inkscape uses Scalable

More information

If you have any questions, please send them to me via at No phone calls please. Thank you.

If you have any questions, please send them to me via  at No phone calls please. Thank you. 2015 Stamford Downtown Events Printing Needs Stamford Downtown Five Landmark Square, Suite 110, Stamford, CT 06901 Fax 203-348-6857, annette@stamford-downtown.com In order to try to reduce our printing

More information

Using the Shaping Tools to Modify Objects

Using the Shaping Tools to Modify Objects Using the Shaping Tools to Modify Objects In CorelDRAW, shaping commands give users a powerful means to create new shapes or manipulate current shapes by adding, subtracting, or dividing them. Shaping

More information

Click on the Latest materials download link on the downloads page and save the file to your desktop for easy access.

Click on the Latest materials download link on the downloads page and save the file to your desktop for easy access. Download / Extract the Materials File. Click on the Latest materials download link on the downloads page and save the file to your desktop for easy access. When down loaded double click on the materials.exe

More information

Stainless Steel Hatch Fasteners Page

Stainless Steel Hatch Fasteners Page Izerwaren numbers Stainless Steel Hatch Fasteners Page -4-3-0-0 hatch fasteners, flush type with separate key sea water resistant - leak proof finish: rolled Installation: Drill hole: 22.5 mm Ø / 7/8 Back

More information

Main Idea: classify polygons and determine which polygons can form a tessellation.

Main Idea: classify polygons and determine which polygons can form a tessellation. 10 8: Polygons and Tesselations Main Idea: classify polygons and determine which polygons can form a tessellation. Vocabulary: polygon A simple closed figure in a plane formed by three or more line segments

More information

Inkscape Interface. commands panes snap. tool. menus. controls. controls. toolbox. canvas. page. palette

Inkscape Interface. commands panes snap. tool. menus. controls. controls. toolbox. canvas. page. palette Inkscape Interface menus box canvas page palette commands panes snap Toolbox Interface Inkscape Selectionmenus Edit Paths by Nodes box Rectangle Align and Distribute pane Fill and Stroke panecommands panes

More information

EDEXCEL NATIONAL CERTIFICATE UNIT 4 MATHEMATICS FOR TECHNICIANS OUTCOME 1

EDEXCEL NATIONAL CERTIFICATE UNIT 4 MATHEMATICS FOR TECHNICIANS OUTCOME 1 EDEXCEL NATIONAL CERTIFICATE UNIT 4 MATHEMATICS FOR TECHNICIANS OUTCOME 1 TUTORIAL 4 AREAS AND VOLUMES Determine the fundamental algebraic laws and apply algebraic manipulation techniques to the solution

More information

MIRROR POLISHED POSTS See page 46

MIRROR POLISHED POSTS See page 46 PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.

More information

G r a d e 1 1 A p p l i e d M a t h e m a t i c s ( 3 0 S ) Final Practice Examination

G r a d e 1 1 A p p l i e d M a t h e m a t i c s ( 3 0 S ) Final Practice Examination G r a d e 1 1 A p p l i e d M a t h e m a t i c s ( 3 0 S ) Final Practice Examination G r a d e 1 1 A p p l i e d M a t h e m a t i c s Final Practice Examination Name: Student Number: For Marker s Use

More information

Polyhedron 10.1 POLYHEDRONS, PRISMS, AND PYRAMIDS. A solid made up of Polygons. face. edge. vertex

Polyhedron 10.1 POLYHEDRONS, PRISMS, AND PYRAMIDS. A solid made up of Polygons. face. edge. vertex 10.1 POLYHEDRONS, PRISMS, AND PYRAMIDS Polyhedron Definition A solid made up of Polygons Picture/Example face edge vertex prefix for a polyhedron Gives you the number of faces on the polyhedron. Tetrahedron,

More information

3 Sleep button Enable Sleep mode or Hibernate mode. Notes:

3 Sleep button Enable Sleep mode or Hibernate mode. Notes: Quick Reference Use the To 3 Sleep button Enable Sleep mode or Hibernate mode. Indicator light color and its corresponding printer status Indicator light Printer status Off The printer is off or in Hibernate

More information