HIGH PERFORMANCE AUDIO WS-MC1 WET SOUNDS MARINE MEDIA CENTER SYSTEM WS-MC1 MARINE MEDIA CENTER SYSTEM OWNER'S MANUAL WETSOUNDS.COM

Transcription

1 HIGH PERFORMANCE AUDIO WS-MC1 WET SOUNDS MARINE MEDIA CENTER SYSTEM WS-MC1 MARINE MEDIA CENTER SYSTEM OWNER'S MANUAL WETSOUNDS.COM

2 1 THANK YOU FOR PURCHASING WET SOUNDS! Congratulations! Thank You for purchasing the Wet Sounds WS-MC1 Marine Media Center System! Wet Sounds professional marine audio products represent the ultimate in high performance marine audio. Wet Sounds products are specifically engineered to withstand the rigorous marine environment. Please take a moment to read the instruction manual & connection guide before starting the installation. If you have any questions or concerns, please contact a certified Wet Sounds dealer or Wet Sounds Tech Support: WET-SPKR ( )

3 ABOUT 2 WS-MC1 MARINE MEDIA CENTER SYSTEM Operations / Installation Manual FEATURES INCLUDE: AM/FM/Weather Band tuner with RDS Bluetooth Streaming, Auxiliary, USB, Pandora Simple & Secure Bluetooth Pairing for Android & IOS (A2DP/AVRCP 1.4) 5 Ultra Bright full color TFT display displays album art via connected devices Playlist & folder browsing via BT or USB Connection 4 Zones of Independently Controllable Audio Output with 4V Signal Output Internal Power Amplifier 2 Ohm Adjustable Input Gains Day/Night Illumination & Dimming Accepts the optional MC-TR transom remote Fully upgradeable operating system software via USB port 4 Zone lighting control (with Optional WS-4Z-RGB-BB) The WS-MC1 is a marine grade 2-piece media center. Included with the WS-MC1: MC-MD Main Display w/soft plastic protective cover MC-BB Black Box 8Ft long extension cable to connect the MC-BB to the MC-MD Wiring Harness, Mounting hardware

4 3 WS-MC1 BASIC CONTROLS Main Control Knob (MCK) This allows adjustment of Main Volume. When the MCK is pressed, all audio zones are displayed. To adjust a zone, select it by pressing either the MCK or the corresponding button below the display (6). The MCK will adjust the zone that is highlighted GREEN. Continue to press the MCK until all zones are highlighted BLUE, indicating that the MAIN volume is being adjusted. The proportions of the levels selected in the individual zones will be held when the MAIN volume is adjusted. 2. POWER/MUTE Press & hold this button for power on/off. Short press this button to MUTE/unmute the volume of all zones. The MC-MD will confirm the volume is muted in the display. 3. MENU Allows access to functions that are different on each SOURCE. 4. SETUP Allows access to controls that affect all functions of the MC1, press the SETUP button until the options appear. Turn the MCK or press the ^ v buttons (6) below the display. When the desired option is highlighted, select it by either pressing the MCK, or the ENTER button below the display. AUDIO Selecting this will allow access to: EQUALIZATION Allows adjustment of BASS/MID TREBLE for all audio zones of the MC1 BALANCE Allows adjustment between left & right of each zone individually

5 WS-MC1 BASIC CONTROLS 4 ZONES Selecting this allows access to each audio zone. The options are: RENAME Allows a customized label (8 characters max) to be applied to each zone. To change the characters, rotate the MCK until the desired letter or number is displayed, then press the MCK to move to the next character & repeat the process. Once the zone label is changed, press the MCK repeatedly until all 8 characters have been changed (a blank space is available). Once the zone is renamed, the MC1 will confirm the action via the display. All zones are capable of being renamed with a custom label. ENABLE/DISABLE When a zone is disabled, it will no longer appear on the screen. LIGHTING Allows access to each lighting zone. The options are: RENAME Allows a customized label (8 characters max) to be applied to each zone. To change the characters, rotate the MCK until the desired letter or number is displayed, then press the MCK to move to the next character & repeat the process. Once the zone label is changed, press the MCK repeatedly until all 8 characters have been changed (a blank space is available). Once the zone is renamed, the MC1 will confirm the action via the display. All zones are capable of being renamed with a custom label. ENABLE/DISABLE When a zone is disabled, it will no longer appear on the screen. BLUETOOTH Displays a list of Bluetooth devices available for connection to the MC1. To connect, disconnect, or delete a displayed device, rotate the MCK until the desired device is highlighted, then choose Connect, Disconnect, or Delete using the buttons (6) below the display. Make sure the Bluetooth on the device is enabled (through the device s settings). The MC1 will confirm the action via the display. LEVEL ADJUST Allows individual volume level adjustment of the Bluetooth Audio and the Auxiliary inputs. Ideally all input sources in a system are the same volume level, but if not this adjustment might be needed if the output level of the Bluetooth Audio or the Auxiliary sources are louder than the other sources.

6 5 WS-MC1 BASIC CONTROLS LABEL PRESETS Allows the 3 shortcut keys to have customized labels applied (up to 8 characters). SHORTCUT KEYS Allows any source to be assigned to the 3 shortcut keys. Once in the Shortcut key mode, use the MCK to select from the available sources, then use the buttons below the display to assign the sources to SC1, SC2, or SC3. After the Shortcut keys are set up, pressing these buttons will select the source set to that key. LCD BRIGHTNESS Allows adjustment of the brightness of the display. Adjustment is made by either rotating the MCK, or using the buttons (6) below the display. CLOCK Selecting this allows the clock to be set. Adjustment is made by either rotating the MCK, or using the buttons below the display. DAY NIGHT MODE Allows the ability to scroll through the display options of DAY (white screen/black characters) NIGHT (black screen/ white characters) or AUTO. In AUTO mode, the display is in DAY mode until the vessel s lights are turned on, then the display goes into NIGHT mode. PLEASE NOTE in order for the AUTO function to operate properly, the Orange wire in the MC-BB harness labeled DIM INPUT must be wired to a circuit in the vessel that gets +12V whenever the main lighting switch is turned on. AUTO DIMMER Allows two options: When ON is selected, the display on the MC-MD is controlled by the dimming switch on the vessel. PLEASE NOTE in order for this function to operate properly, the Orange wire in the MC-BB harness labeled DIM INPUT must be wired to a circuit in the vessel that gets +12V whenever the main lighting switch is turned on. When OFF is selected, the dimming circuit of the vessel will not affect the display of the MC-MD. SOFTWARE Allows access to the software menu of the MC1. : VERSION Displays what version of the operating software is currently running on the MC1. Please visit to see the most up to date MC1 operating software.

7 WS-MC1 BASIC CONTROLS 6 UPDATE Allows the operating software of the MC1 to be updated while still installed in the vessel. For detailed Software updating instructions, please visit 5. SOURCE Allows access to seven different sources by pressing the buttons below the display (6): RADIO OPERATION Press SOURCE, then RADIO. BAND button: Selects FM1/FM2/AM/Weather Band. PRESETS Press PRESET to display what stations are set, then rotate the MCK to highlight a selection, then press the MCK to select that station. To manually set a preset, tune to the station, press PRESET, then press & hold either the MCK or the ENTER button. The MC1 will confirm the selection. MANUAL TUNE Press & hold the BAND button until the Manual Tune displays, then tune using the multifunction buttons below the display. AUTO STORE Press MENU, then select Auto Store The MC1 will automatically tune to & store presets in the memory. LOCAL/DISTANT STATION Press MENU, then select Local Seek Choose Off/On. RADIO BROADCAST DATA SYSTEM Press MENU, then select RBDS Choose Off/On. Note not all FM Radio stations support RBDS, so availability of this feature may be limited. RADIO REGION The MC1 is defaulted to receive broadcasts in the USA region, but Russia, Latin America, Asia, Japan, Middle East, Australia & Europe regions are also available through this setting. USB Operation Press SOURCE, then USB. Please note if there is nothing plugged into the USB port on the MC-BB, this selection will not be possible. The USB port on the MC-BB is capable of both connecting & charging Apple devices & charging most Android devices. PLAY/PAUSE, Forward/Reverse Track, Shuffle & Repeat features are all available via the buttons below the display (6). Press the MENU button to search for Playlists, Artists, Albums, Genres, Songs, Composers, Audiobooks, or Podcasts. The MC1 can display either ALL or will search alphabetically. In addition to connectivity with IOS sources, the MC-1 also allows music files (MP3 format only) to be read directly from a USB/Thumb Drive.

8 7 WS-MC1 BASIC CONTROLS BLUETOOTH AUDIO Operation Follow the instructions above to connect the desired Bluetooth device to the MC1. Press SOURCE, then BT AUDIO. PLAY/PAUSE, Forward/Reverse Track, Shuffle & Repeat are all available via the buttons below the display (6). Press the MENU button to search for Playlists, Artists, Albums, Genres, Songs, Composers, Audio books, or Podcasts. The MC-1 can display either ALL or will search alphabetically in each category. AUXILIARY INPUT Operation Press SOURCE, then AUX to allow access to the 3.5mm auxiliary input on the MC-BB. This can be used to allow connection of a variety of audio sources. PANDORA This feature allows the control of the Pandora application from the MC1 directly (Android users are limited to Bluetooth connection only, while IOS users can use both USB and Bluetooth). The Pandora app will need to be started on your device first, then press SOURCE, then PANDORA on the MC1. Features Looking Glass Allows all the stations you have created on Pandora to be displayed. Rotate the MCK to scroll through, then press to select. >II pressing this pauses the Pandora stream. Pressing it again will restart the Pandora stream. >>I Pressing this forwards to the next song on the Pandora Stream. **> Allows access to more features. The Bookmark, Thumbs Up & Thumbs Down buttons help you customize your Pandora experience. LIGHTING The MC1 allows the control of up to 4 Zones of RGB LED lighting when used with the optional WS-4Z-RGB-BB Controller. You must have this accessory to be able to control RGB LEDs with the MC1. For more details on the WS-4Z-RGB-BB visit

9 WS-MC1 BASIC CONTROLS 8 Operation Press SOURCE (2X), then LIGHTING to access the lighting control screen. Select which zone you want to control by using the buttons below the display (6), then rotate the MCK to select the feature you want to adjust, then press the MCK to select it. Power Mode Selecting this enables access to the Power/Mode feature. This allows you to quickly turn on/off either the zone selected, or all zones. The MODE feature allows the choice of a variety of LED effects: Solid - RGBs remain continuously lit at one selected color. Fade - RGBs fade from zero illumination to full illumination based on the rate chosen. Music - RGBs react to the beat of the music - Please make sure that the AUX out (3.5mm) on the MC- BB is connected to the music input of the WS-4Z-RGB-BB to make this feature function. Strobe RGBs flash continuously. Change RGBs alternate colors. Each zone will display the Power & Mode status on the main Lighting Display screen. For instance, if Zone 1 is showing ON/Change that indicates that Zone 1 is turned on & will be alternating RGB colors. Color Selecting this enables the color selection screen for one zone. Rotate the MCK to highlight the desired RGB color & press the MCK to select it. The color chosen will be displayed for each zone on the main lighting control screen. Fade Rate Selecting this enables control of the rate of fade when the fade effect is chosen. Intensity Level Allows the adjustment of the output (or brightness) of that zone s RGBs.

10 9 LIMITED WARRANTY What This Warranty Covers This is a limited warranty. This warranty covers any defect in materials and workmanship. This warranty only covers the original purchaser and is not transferable. This warranty is also only valid if the original purchase was made from an authorized Wet Sounds TM dealer. How Long Coverage Lasts This warranty extends for 2 years from the date of purchase. It is recommended to REGISTER your warranty online within 45 days of purchase at click on warranty registration. What Is Not Covered This warranty does not cover fading or discoloration caused by exposure to sunlight or chemicals such as ammonia, household bleach, or any cleaning material that contains abrasive substances. Wet Sounds, Inc. does not cover the expense for removal or re-installation. Additionally, shipping TO Wet Sounds, Inc. must be paid for by the purchaser. This warranty is void and inapplicable is Wet Sounds deems that the product was abused or misused; including but not limited to damage caused by accident, mishandling, improper installation, removing the inline fuse on the power connection, negligence, normal; wear and tear, excessive water or heat damage, freight/shipping damage, or products that have been disassembled by anyone other than Wet Sounds technical staff. Wet Sounds will not be responsible for any incidental or consequential damages, except to the extent provided (or prohibited) by applicable law. This warranty gives you specific rights, and you may also have other rights which vary from state to state. What Wet Sounds, Inc. Will Do Wet Sounds, Inc. will repair any part of your product that proves to be defective in materials or workmanship. In the event repair is not possible, Wet Sounds will replace the product in question. If it is deemed necessary Wet Sounds, Inc. will either replace the entire product with a refurbished unit or it will be replaced with a model that is similar in price is that model is no longer available. Labor costs and materials needed to complete this service will be at No Charge to the purchaser. Additionally, return shipping FROM Wet Sounds, Inc. to the purchaser will be paid for by Wet Sounds.

11 LIMITED WARRANTY 10 How To Get Service Contact Wet Sounds, Inc. either by phone ( ) or by A service representative will assist you in confirming that the problem you are experiencing is caused by a defective product and if that product is covered under warranty. The service representative will issue you a Return Manufacturer s Authorization (RMA) and other details to obtain service for your product. DO NOT RETURN YOUR PRODUCT WITHOUT THE PROPER RETURN AUTHORIZATION (RMA)! Internet Warning Wet Sounds, Inc. products sold on any nonauthorized web site or internet auction site are void of any and all manufacturer s warranty. Please contact Wet Sounds ( ) or visit our web site ( for a list of authorized online sellers or to find an authorized installing retailer near you. WET SOUNDS INC S Sam Houston PKWY W Suite 100 Houston, Texas USA

12 WET SOUNDS INC S Sam Houston PKWY W Suite 100 Houston, Texas USA