12/24/240V Full HD LED TV/DVD/USB Combo (22") Instruction Manual

Transcription

1 12/24/240V Full HD LED TV/DVD/USB Combo (22") Instruction Manual

2 Contents Important Safety Instructions What s in the Box TV Controls Stand mount guide TV Inputs and Outputs SYSTEM CONNECTIONS AV Input 8 PC Input 8 HDMI Input 9 YPbPr Component Input 9 COAXIAL Output 10 USB Input 10 Antenna Connection 11 Remote Control OSD MENU OPERATION Source Selection 15 Picture Sound Channel Feature Setup EPG PVR 33 Auto Installation MEDIA OPERATION Photo Music Mocie E-Book Built-in DVD Player Operation Cleaning and Maintenance Troubleshooting Specifications

3 Important Safety Instructions reference, along with the warranty card, purchase receipt and carton. The safety correctly adhered to. June cm (22") Full HD LED TV Part Number: PUT DC 12V Max 3A 36W Before installing this TV set, make sure your outlet voltage corresponds to the voltage stated on the appliance rating label of the power adaptor being used.. Only use this TV with the power adaptors supplied. If either plug does not fit into your outlets, consult your dealer or an RV service center for Do not overload the power outlet. CAUTION the power supply cord, plug and antenna cable to rain or moisture; do not use it anywhere near water; do not touch the power plug with wet hands. Do not let the cord hang over the edge of a table or counter, or touch hot surfaces. Do not allow anything to rest on or roll over the power cord and antenna cable. Protect the cord and run all cables so that no one steps on or trips over them. Do not run the cord near heat-producing appliances such as radiators, stoves or irons. The excessive heat could melt the insulation and expose live wires. When not in use, disconnect the power cord from the outlet. Hold the plug, not the cord, when disconnecting the unit. Pulling the cord can damage the internal wires and may cause a fire. Never touch the TV screen, antenna or cord during thunderstorms. Stop use during thunderstorms; unplug the unit when a thunderstorm is approaching. Important Safety Instructions (cont) Usage conditions and restrictions Follow the instructions in this manual when installing and adjusting the TV set. Only adjust those controls that are covered in this instruction manual; improper adjustment of other controls may result in damage. If this happens, unplug the TV and have it serviced by appropriately qualified personnel. Do not change or modify the TV set in any way. Only use the attachments/ accessories specified. Do not cover the ventilation openings with items such as newspapers, tablecloths, curtains etc., as this could impede ventilation. Do not insert any objects of any kind into this unit through the ventilation slots or DVD slot, as they could touch the current-carrying parts or short-circuit parts, resulting in fire, electric shock or damage to the unit. Do not touch the screen with fingers, as this may scratch or smudge the TV screen. Do not expose the batteries to excessive heat such as sunshine, fire or the like. Unplug the TV set in all of the following circumstances: If it has been subject to impact or has been dropped and is damaged. If its voltage adaptor plugs, or the wall socket, are damaged. The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Young children should be supervised to ensure they do not play with the TV. Position If a television is not positioned in a sufficiently stable location, when stand mounted, it can potentially be hazardous if it falls. Many injuries, particularly to children, can be avoided by taking simple precautions such as: Using cabinets, shelves or stands that provide a sturdy support for the TV and are not in areas where the TV can be accidently knocked or bumped. Only using furniture that can safely support the television. Ensuring the TV is not overhanging the edge of the supporting furniture. Not placing the TV on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the TV to a suitable support. Not standing the TV on cloth or other materials placed between the TV and supporting furniture. Educating children about the dangers of climbing up to reach the TV controls. 2 3

4 Important Safety Instructions (cont) When deciding where to put the TV set, make sure the location is: Well ventilated. Leave at least a 20cm space all around the TV set for good ventilation. Protected from overheating and away from direct sunlight. Away from damp and cold. Away from areas with extremes of temperature (below 0 C or exceeding 40 C) or moisture. Away from moisture drips or splashes. Protected from excessive dust. Do not install this equipment in a confined space such as a bookcase or similar. Do not put any objects filled with liquids, such as vases, on top of the TV set. Do not place any naked flame sources, such as lighted candles, on top of the TV. What s in the Box 22" TV with inbuilt DVD Player Column bracket 12/24/240V FHD LED TV/DVD/USB Combo Remote Control (22") Instruction Manual Manual 4 Screws 4 Screws 4 5

5 TV Controls Stand mount guide Screw hole A Screws TV Controls 1. VOL(+) - This button increases the TV s volume. If the OSD menu is active, pressing this button will move the selection to the right. 2. VOL(-) - This button decreases the TV s volume. If the On Screen Display(OSD) menu is active, pressing this button will move the selection to the left. 3. CH(+) - This button performs the channel up function. If the OSD menu is active, this button functions as up control for the menu. 4. CH(-) - This button performs the channel down function. If the OSD menu is active, this button functions as down control for the menu. 6. MENU - This button activates the OSD menu. If a sub-menu is active, pressing this button will return the selection to the previous menu level. 5. SOURCE - This button switches between all the different sources of the TV. When the OSD is active, this button acts as the enter button and confirms the menu selection. 7. After you load a disc, press to play the disc, and press twice to pause. 8. Press the button when the power is on the disc will eject, Press the button again to load the disc automatically. 9. POWER( ) - Turn on the TV by pressing the button once. Press the button again to turn off the TV. Screw hole B Screw hole C Screw hole D Screws Instructions: 1. Place the TV unit on a flat and clean surface. 2. Attach stand mount using 4 screws through holes B into A. 3. Place the base on to the mount with the supplied screws through holes D into C. TV Inputs & Outputs Rear Bottom EARPHONE OUT DC 12V four 6 VIDEO 2 PC AUDIO VGA HDMI L R Rear Side COAXIAL OUT RF USB Y Pb Pr POWER: (DC 12V) input Earphone out: Output for headphones or head units such as RV Media Head Units with TV input. AV Inputs: Composite Video & Audio (A/V) in. PC Audio Input: Connect to the audio output jack on a computer. VGA Input: Connect to a computer s VGA output jack. HDMI Input: HDMI in. COAXIAL Out: Digital Audio output for Surround Sound amplifiers and other devices. RF Input: Connect to an external antenna to receive ATV/DTV TV signals in ATV/DTV modes. 9. USB: USB/Multimedia input. 10. Y/Pb/Pr Input: Component Video in. 7

6 System Connection System Connection 3. HDMI PUT HDMI input: Use the SOURCE button on the remote control to select HDMI. NOTE: Please, make sure the inputs and outputs have firm connections before connecting power. 1. COMPOSITE A/V PUT Audio/video input: Use the SOURCE button to select AV on the remote control. Pr Pb Y Y Pb Pr Source eg. Blu-ray, DVD, Satellite, camcorder etc USB USB HDMI 1 DC 12V EARPHONE OUT VIDEO L R PC AUDIO VGA RF COAXIAL OUT COAXIAL OUT RF Video Cable Red/White/Yellow (Not supplied) DC 12V HDMI EARPHONE OUT VIDEO L R 2. PC PUT PC input: Use the SOURCE button on the remote control to select PC. PC AUDIO VGA HDMI Pb Pb VGA OUTPUT Pr Pr 4. YPbPr COMPONENT PUT Video component input: Use the SOURCE button on the remote control to select YPbPr. This input consists of both Video (Green/Blue/Red) and Audio (Red/White) VGA OUTPUT Pb Pr USB USB Y Y Y COAXIAL OUT COAXIAL OUT RF RF PC AUDIO OUTPUT DC 12V EARPHONE OUT DC 12V VIDEO L R 8 PC AUDIO VGA HDMI EARPHONE OUT VIDEO L 9 R PC AUDIO VGA HDMI

7 System Connection System Connection 5. COAXIAL OUTPUT Allows connection of Digital audio systems and Surround Sound. 7. Antenna connection Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be.connected to the antenna jack directly Y Pb Pr Antenna lead with 75 ohm male PAL Connector 75ohm coaxial cable COAXIAL RF USB Antenna cable COAXIAL OUT COAXIAL Cable (Not supplied) Remote Control Installing Batteries DC 12V EARPHONE OUT VIDEO L R PC AUDIO VGA 1 HDMI Open the battery compartment cover on the back of the remote. Battery 6. USB PUT Use the SOURCE button on the remote controller to select Media. Cover Insert two 1.5V AAA size batteries using the correct polarity as shown..don t mix old or used batteries with.new ones. 2 x size AAA 1.5V Y Pb Pr 2 To use the remote control, point it towards the remote sensor at the front of the television. The remote control has a range of up to approximately seven meters from the TV at an angle of up to 60 degrees. USB memory Replace the cover. USB 3 COAXIAL OUT RF Battery Cover DC 12V EARPHONE OUT VIDEO L R 10 PC AUDIO VGA - Batteries should not be exposed to excessive heat such as direct sunlight, fire or the like. - If not being used for a period of time, please remove the batteries from the remote in case of leakage. - Do not mix old & new batteries together. HDMI 11

8 Remote-Control Unit /25 22/ / /48 POWER SLEEP P.MODE S.MODE AUTO DISPLAY MENU FAV AUDIO SUBTITLE REVEAL DEX A-B REPEAT MUTE SOURCE EXIT EPG TIME SHIFT REC.MENU SIZE OK QT I/II ASPECT D.MENU SETUP D.DISP TEXT TV/RADIO CANCEL HOLD REC MIX SUBPAGE / /28 23/ /47 39/46 44/50 43/49 No. Button Description 1 POWER Turns the TV on or off to standby mode. 2 MUTE Press to mute the sound. Press again to regain sound Press 0 9 to select a TV channel directly. The cannel will change after 2 seconds. 5 Return to the previously viewed program SLEEP P.MODE S.MODE AUTO DISPLAY SOURCE MENU EXIT Set the delay time for the TV to turn off automatically. Select the picture mode. Select the sound mode. Use for adjustments in PC mode. Press to display the source and channel info. Press to select signal the source for the TV. Allows you to navigate the on screen menus (OSD). Exit from the current menu or sub menu. Allows you to navigate the on screen menus and adjust the system settings to your preference. 14 OK Select the option. 15 CH+/ Press these two buttons to change channels up/down VOL+/ QT Press these two buttons to increase/decrease the volume. Quick Tune. Quick TV Channel Autotune Button. 18 AUDIO Press to change the DTV or DVD audio language. Select NICAM audio mode. 19 I/II Only be available for TV programmers with NICAM transmission, and default mode is mono. 20 ASPECT Press this button to select the aspect ratio of the screen. 21 Eject/insert disc. 22 D.MENU Quick Teletext navigation or setup settings / DVD: Video DVD Menu button. 23 SETUP DVD system setup. 24 D.DISP Quick navigation during Teletext or setup settings / DVD: DVD Information button R (DELETE) G (RENAME) Y (MOVE) B (SKIP) Delete function button. Rename function button. Move function button. Skip function button. 29 FAV Selects favorite channel(s). 30 EPG Press to display EPG (Electronic Program Guide). 31 TIME SHIFT Press to switch to TIME SHIFT mode. 32 REC.MENU Press to switch to REC.MENU immediately (DTV only). 33 SUBTITLE Press to select the subtitle language. 34 REVEAL Shows hidden words or pages by Teletext. 35 TEXT Switch on/off of Teletext window. 36 REC/ Press to record the program immediately. 37 DEX Returns to Index page by Teletext. 38 TV/RADIO Press to switch between DTV and radio programs 12 13

9 No. Button Description 39 CANCEL MIX REPEAT SIZE HOLD SUBPAGE Switches the Teletext window to the background; only the current page no is visible. Sets the transparency of Teletext window. DVD: Repeat mode selection. Zoom In or Out of the Teletext window. Holds on the current Teletext page. Displays a sup page of upper Teletext options. Play and Pause Media Player / DVD. Fast Rewind Media Player and DVD. Fast Forward Media Player and DVD. Stops playback Media Player and DVD. Plays the previous Media Player or DVD file/chapter. Plays the next Media Player or DVD file/chapter.. OSD Menu Operation Source Selection Input DTV ATV AV YPbPr HDMI PC Media DVD Press SOURCE button to display the input source list. Press the / buttons to select the input source you want to watch, Press the OK button to select the input source. Main Menu Press MENU button to display the MA OSD MENU. Press / buttons to select the sub MENU that you want. Press ENTER button or button to enter the sub menu, and press button to return back to the previous menu. Press / buttons to select an option in the submenu and then press ENTER button or button to select the option. Press / buttons to adjust the value or press / buttons to select drop down options. You can press MENU button to save and return back to the previous menu, and press EXIT button to exit the entire menu.s 14 15

10 OSD Menu Operation Picture Menu Press TV MENU button to display the main menu. Press / buttons to select Picture in the main menu, then press ENTER button or button to select. OSD Menu Operation Press / buttons to select the option that you want to adjust in the Picture menu, and then press ENTER button or button to select.. Press / buttons to adjust or press / button to select. And press ENTER button or button to select the sub menu. After finishing your adjustment, press MENU button to save and return back to the previous menu, and press EXIT button to exit the entire menu.. Brightness Press / buttons to select Brightness, then press ENTER button or button to enter and press / buttons to adjust. Then press MENU button to return back the previous menu. Contrast Press / buttons to select Contrast, then press ENTER button or button to enter and press / buttons to adjust. Then press MENU button to return back the previous menu. Sharpness Press / button to select Sharpness, then press ENTER button or button to enter and press / buttons to adjust. Then press MENU button to return back the previous menu directly. Colour Press / button to select Colour, then press ENTER button or button to enter and press / buttons to adjust. Then press MENU button to return back the previous menu directly. Tint Press / buttons to select Tint, then press ENTER button or button to enter and press / buttons to adjust. Colour Temperature Press / buttons to select Colour Temperature, then press ENTER button or button to enter and / button to select Standard, Cool, Warm. Aspect Ratio Press / button to select Aspect Ratio, then press ENTER button or button to highlight and / button to select Auto,4:3,16:9,Zoom1,Zoom2 or Panorama

11 OSD Menu Operation Sound Menu Press MENU button to display the main menu.. Press / buttons to select Sound in the main menu, then press ENTER button or button to select. OSD Menu Operation Surround Press / button to select Surround, then press ENTER or button to enter and press / button to select ON or OFF. Turning this setting ON can also be useful in increasing the TV s overall volume level. AVL - Auto Volume This function when turned on will help even out the volume level between different A/V sources so one is not greatly louder than another. It can also help reduce the volume of loud TV ads compared to TV shows, although could lower the overall volume of the TV. The result depends greatly on the A/V source so this function is set by default to off. Press / button to select AVL, then press ENTER or button to enter and press / button to select ON or OFF. SPDIF Press / button to select SPDIF, then press ENTER or button to enter and press / button to select. (Available SPDIF modes: Off, PCM, Bitstream) Then press ENTER button or button to enter and press / buttons to adjust, then press MENU button to return back the previous menu. Press / buttons to select the option that you want to adjust in the Sound menu, then press ENTER button or button to enter.. Press / buttons to adjust or press / to select, and press ENTER or button to return to the submenu.. After finishing your adjustment, Press MENU button to save and return back to the previous menu, or press EXIT button to exit the entire menu. Audio Description Press / buttons to select Audio Description, then press ENTER or button to enter and press / buttons to select ON or OFF. Sound Mode Press / buttons to select Sound Mode, and then press ENTER or button to enter. Then press / buttons to select. (Available Sound mode: Bass, Treble, EQ, Balance). You can change the value of bass and treble, Balance and EQ, when the sound is in User mode. TIP: You can press S-MODE button on the remote control to change the Sound Mode directly.. Bass Press / buttons to select Bass, then press ENTER or button to enter and press / buttons to adjust. Then press MENU button to return back the previous menu. Treble Press / buttons to select Treble, then press ENTER or button to enter and press / buttons to adjust. Then press MENU button to return back the previous menu. Balance Press / buttons to select Balance, then press ENTER or button to enter and press / buttons to adjust. Then press MENU button to return back the previous menu

12 OSD Menu Operation Channel Menu Press MENU button to display the main menu. Press / buttons to select Channel in the main menu, then press ENTER button or button to enter. OSD Menu Operation Press the RED button to set the current channel to lock, if the current channel already locked, press the RED button again cancel the lock. Press the GREEN button to delete the current channel. Press the YELLOW button to skip the current channel, if the current channel already skipped, press the YELLOW button again to cancel the skip function. Press the BLUE button to swap the channel position. If one of the channel has been incorrectly placed in the station listing, you may move it to the current position you want using the / keys. Select the channel to be moved, press the BLUE button, move the channel to the new location and press the ENTER button or the BLUE button, this will move the station to the new location. If there is a delete channel icon, press the MENU button or the ENTER button. The following notification will appear: 1. Press / buttons to select the option that you want to adjust in the Channel menu, then press ENTER or button to enter. 2. Press / buttons to select and press ENTER or button to select the sub menu. 3. After finishing your adjustment, press MENU button to save and return back to the previous menu, or press EXIT button to exit the entire menu. Channel Management Press / buttons to select Channel Management, then press ENTER or button to enter. Press to choose OK, or press to cancel, press ENTER to confirm

13 OSD Menu Operation Press / buttons to select the channel, then press ENTER to open the rename channel menu. OSD Menu Operation Favorites Manager Press / buttons to select Favorite Manager, then press ENTER or button to enter. Press the RED button to enter a space. Press the GREEN button to change case, Press / or / buttons to select the character, and then press ENTER to confirm. Press the YELLOW button to delete the previous character. Press the BLUE button to save the change and return to the previous page. Press the EXIT button and the menu will appear as follows: Select Cancel to exit the entire menu without changes. Select OK to save the changes and the following notification will be displayed: Press / buttons to select Channel, press the RED button to set to Fav1. Press / buttons to select Channel, press the GREEN button to set to Fav2. Press / buttons to select Channel, press the YELLOW button to set to Fav3. Press / buttons to select Channel, press the BLUE button to set to Fav4. If the current channel already be one of your favorite channels, press the RED/ GREEN/ YELLOW/ BLUE button again will set it to a normal channel. Press the MENU button or EXIT button and the successfully updated menu will appear. Country Press ENTER button or button to enter, then Press / button to select the appropriate country, and press ENTER or button to confirm. TV Connection The default setting for this mode is AIR. This setting does not need to be changed for RV operation in Australia. Channel Auto Search Press / button to select TV Channel Auto Search, then press ENTER or button to enter (When the System Lock is on, please input the default password 0000 )

14 OSD Menu Operation Auto Search - cont d Press / buttons to select All, Digital or Analogue, then press ENTER or button to select. OSD Menu Operation Feature Menu Press MENU button to display the main menu. Press / button to select Feature in the main menu, then press ENTER or to enter. Press ENTER to Auto Search the selected channels, otherwise select CANCEL. NOTE: For most applications in Australia, only DTV channels are used for regular TV broadcasts. PVR/Timeshift 1. Press / buttons to select the option that you want to adjust in the Feature menu, then press ENTER or button to enter. 2. Press / buttons to adjust or press / button to select. 3. After finishing your adjustment, press MENU button to save and return back to the previous menu and press EXIT button to exit the entire menu. Child Lock Press / buttons to select Child Lock, then press ENTER or button to enter. (Please enter the default password 0000 ) When auto search finished, a Save Successful will appear to confirm the Auto Search function has completed

15 OSD Menu Operation Lock Channel This enables Parental Guidance to be activated and the TV s Password to be changed. Press / buttons to select Child Channel, then press / key to select off or on. Then press ENTER or button to confirm. Parental Guidance Press / buttons to select Parental Rating, then press ENTER or button to enter the sub menu. Then press / button to select the highest allowed program rating. Then press ENTER or button to confirm. Change Pin Code Press / buttons to select Change Pin Code, then press ENTER or button to enter and the Change Pin Code menu will appear as follows: OSD Menu Operation OSD Language Press / buttons to select OSD Language, then press ENTER or button to enter the sub menu, then press / buttons to select, then press ENTER or button to confirm. Preferred Subtitle (Language) Press / buttons to select Preferred Subtitle, then press ENTER or button to enter the sub menu, then Press / buttons to select, then press ENTER or button to confirm. Preferred Audio (Language) Press / buttons to select Preferred Audio, press ENTER or button to enter the sub menu, then press / buttons to select, then press ENTER or button to confirm. Digital Teletext Language (DTV) Press / buttons to select Digital Teletext language, then press ENTER or button to enter the sub menu, then Press / buttons to select, then press ENTER or button to confirm. Analog Teletext Language (ATV) Press / buttons to select Analog Teletext language, then press ENTER or button to enter the sub menu, then Press / buttons to select, then press ENTER or button to confirm. Enter the old password at (if the old password is incorrect, Invalid Password will be displayed). Then enter the new password. Finally, enter the new password again to confirm the new password. If successful, a notification will be displayed to confirm this. Language Press / button to select Language, then press ENTER or button to enter the sub menu. Clock Press / buttons to select Clock, then press ENTER or button to enter the sub menu, By default the clock information is supplied by DTV data. Press / buttons to select your time zone, then press ENTER or button to confirm. If you want to manually adjust the clock settings, first change DST to OFF then manually adjust the other clock settings. Sleep (Timer) Press / buttons to select Sleep, then press ENTER or button to select and press / buttons to select the desired time for the TV to automatically turn off. Auto Power Off Press / buttons to Auto Power Off, then press ENTER or button to enter and press / buttons to select the desired time of no activity (eg if you do not change the TV channel or adjust the volume for the selected time). Hearing Impaired Offers additional information and subtitles on selected programmes. Press / buttons to select Hearing Impaired, then press ENTER or button to enter and press / buttons to select ON or OFF

16 OSD Menu Operation Setup Menu Press MENU button to display the main menu. Press / button to select Setup in the main menu, then press ENTER or to enter. OSD Menu Operation PVR/Timeshift Press MENU button to display the main menu. Press / buttons to select PVR/Timeshift in the main menu, then press ENTER or to enter. PC Setup Blue Screen Home Mode Reset TV Setting Software Upgrade 1. Press / buttons to select the option that you want to adjust in the Setup menu, then press ENTER or button to select. 2. Press / buttons to adjust or press / button to select. 3. After finishing your adjustment(s), press MENU button to save and return back to the previous menu and press EXIT button to exit the entire menu. OSD Timer Press / buttons to select OSD Timer which controls how long the OSD menus will be displayed, then press ENTER or button to enter the sub menu, then Press / buttons to select. (OSD Timer options: 5 Second, 10 Second, 15 Second, 20 Second, 25 Second, 30 Second, never), then press ENTER or button to confirm. PC Setup Press / buttons to select PC Setup, then press ENTER or to enter the sub menu, Then Press to enter, then press ENTER or to confirm (when a PC signal is connected). Blue Press / buttons to select Blue screen when there is no input source, then press ENTER or to enter the sub menu, then Press / to select On or Off. Press ENTER or to confirm. Home Mode (Picture Mode) Press / buttons to select OSD Timer, then press ENTER or button to enter the sub menu, Then Press / buttons to select. (Home, Dynamic, Standard, Mild.), then press ENTER or button to confirm. Reset TV Setting To reset the TV to its fatory settings, press / buttons to select Reset TV Setting, and then press ENTER or to select. The password menu will appear when the Child Lock is on. Software Upgrade Caution - this function is only to be used with Software supplied for use with this RV Media TV by Camec. Load the supplied software on to the root directory of an empty USB drive and plug it into the TV s USB interface then press the ENTER key to upgrade. Do not turn the TV off during the upgrade process. The TV will restart when the upgrade process has completed.. Partition Select This function is not necessarily required but you have the ability to use partitions on your USB drive for the PVR (Personal Video Recorder) function. Press the / buttons to select Partition Select, then press ENTER or button to enter the sub menu, then Press / buttons to select the partition you want to use and press the GREEN button to set the highlighted partition as default. This will restrict PVR recordings to the selected partition. Auto Timeshift Press / button to select Auto Timeshift, then press ENTER or to enter the sub menu, then Press / to select On or Off. Timeshift Buffer This sets the period of time the Time Shift function con work for. This also depends on the available space on the USB drive. Press / buttons to select Timeshift Buffer, then press the ENTER or button to open the sub menu, then Press / buttons to select between: auto, 30Mins, 1Hr & 2Hr. Timer (Manual Recording) Use the Timer function to set up timer DTV recording. Press / button to select Timer, then press ENTER or button to enter the sub menu, then Press / buttons to select and use the following functions. Recorder - Turn the record function on/off; Channel - select the channel you want to record; Start Time - set the start time to record; Duration - set the record duration; Date - set the record date; Mode - select the record mode. Record List Press / button to view the program Record List, then press ENTER or button to enter the sub menu, then Press / buttons to select. Recorder Start Press / buttons to select Recorder Start, then press ENTER or button to enter the sub menu, then Press / buttons to select

17 OSD Menu Operation Channel List Press the LIST button on the remote control to display the channel list menu. OSD Menu Operation Subtitle Press the subtitle button on the remote control and subtitle menu will appear as follows: Press / buttons to turn OFF, then press the ENTER button to turn off subtitles. Press / buttons to you select ENG, then press the ENTER button to display subtitles in English. Press EXIT to exit. Press / button to select channel that you want to view, then press ENTER to view. FAV List Press the FAV button on the remote control to display the Favorite List menu.. EPG (ELECTRONIC PROGRAM GUIDE) Press the EPG button on the remote control to display the EPG daily view. Press / buttons to select channel that you want to view, then press the ENTER button to view the channel. Press / buttons to switch between Favorite 1, Favorite 2, Favorite 3 and Favorite

18 OSD Menu Operation 1. The display shows the current channel No. and channel name. 2. The display shows the program s start and finish time plus program name. 3. The display shows the current date and time. Press / buttons to select the channel or program. Press / buttons to select the channel program. Press the RED the button to switch between EPG weekly mode and EPG daily mode. OSD Menu Operation Press / buttons to select the audio language format - (available audio format: right, stereo, left). Press / buttons to change the setting. PVR Function (DTV Only) Press on the remote control to record the current programme when DTV is selected as the current Source. NOTE you must have a USB drive inserted in TV. If the USB drive is not fast enough to record on, the following message will be displayed: It is advisable to try another USB drive but you can select OK to continue with the current drive.press on the remote control to start recording which will display the following dialog: To view programs from the previous day or further back, press the YELLOW button to move to an earlier date. To view programs for the next day or further on, press the BLUE button increase the date. For more information about a particular program, press FO. Press the GREEN button once to add the selected channel to the record list. Press the GREEN button twice to set a Reminder for the program, which will display a small icon beside the selected program. Press EPG once more or EXIT once to cancel the operation. TEXT Press the TT/CC button on the remote control to display the text/closed captions; press the TT/CC button on the remote control again to stop the display. Multi-Audio Press AUDIO button on the remote control to display the multi-audio menu if available. Select Yes to start recording. The following dialog will be displayed: While Recording is in progress, a small dialog box will be displayed on the left of screen: Press on the remote control again to set the Record duration time. Rec Duration Time 0 0 : 0 0 Press on the remote control to stop recording. To stop recording select Yes ; to continue recording select No

19 OSD Menu Operation Auto Installation If you are turning on the TV for the first time and there are no TV stations stored on the TV, the Auto Installation menu will appear on the screen. There are 5 steps as follows: OSD Menu Operation Step 3: Set the Language Note: Australia is set as the default country Step 1: Set Home Mode (Picture Mode) Step 4: Set Auto Power Off Note: The default setting is Off. Step 2: Set the Country Note: Australia is set as the default country

20 OSD Menu Operation Step 5: Set up the TV Connection The default connection for this TV is Air. OSD Menu Operation Step 6: Set up the Auto Search Only DTV is required for most applications in Australia

21 Media Operation Press the MEDIA button on the remote control to access this menu. You can also access this menu by selecting MEDIA as a Source on the remote Control. Press the / buttons to select Photo/Music/Movie/Text, and then press ENTER button to select. NOTE: A USB device must be inserted to use these functions. Media Operation Thumbnails Thumbnails mode can be only be used in photo mode and is highlighted in file browser by pressing EXIT Right( ) as follows: Photo Formats Supported: JPG,JPEG/Progressive JPEG, BMP & PNG Function Introduction Press the FO button to see the file info of the current photo being viewed then press the button to play or pause. You can view the playback status on the right of screen. Press / or / buttons to rotate the picture. Note: Other menu options and descriptions are the same as for Movie menu. Playback Press the "PLAY" key to start photo slide show playback. Key Operation : Same as "PLAY" button on the remote, to start playing pictures in slide show mode. : Same as "PAUSE" button on the remote, to pause the file being played. : Same as "STOP" button on the remote, to stop the slide show and return to file browser. : Same as " <<" / ">> " buttons the on remote, to directly play the previous or next file. : Rotate the picture being viewed (0 º 90 º 180 º 270º). : Zoom in on the current picture. : Same as the "FO" key on remote, to display the current file s information. : Opens the Photo Setup menu which includes Repeat Mode, Background Music, Music Source, Slide Time, Effect. : Press to view the play list menu

22 Media Operation Music Formats Supported MUSIC WAVE WMA AAC AC3 MPEG Read Audio Ogg FLAC LPCM ADPCM WMA STD WMA Prof AAC-LC / HE-AAC AC3 E-AC3 MP1 MP2 MP3 AAC-LC HE-AAC Cook Vorbis FLAC Press / buttons to select the Song you want to listen to, then press the ENTER button or button or button to play. Press the button to return back to the previous menu. Media Operation Movie Formats Supported Type Container Video Decoder MOVIE AVI MPEG-4 ASP H.264 DivX Xvid WMV 9 / VC - 1 MPEG 1/2 MPEG4 WMV RealMedia MPEG-4 SP MJPEG MPEG-1 Video MPEG-2 Video MPEG-2 Video MPEG-4 ASP H.264 Xvid MJPEG WMV 9 / VC-1 RV30 / RV40 Flash QuickTime Sorenson H.263 H.264 MPEG-4 ASP H.264 MJPEG 40 41

23 Media Operation QuickTime ASF Matroska Video DivX TS Stream MPEG-4 ASP H.264 MJPEG WMV3 / WVC1 MP4S / M4S2 MPEG-2 Video MPEG-4 ASP H.264 Xvid DivX DivX Plus HD RV30 / RV40 WMV9 / VC-1 MPEG-4 ASP DivX Xvid MPEG-2 Video H.264 WMV 9 / VC-1 Media Operation Movie Press / button to select the folder that you want to view on the USB drive. Press the ENTER button to select a sub folder if required. Press the button to play, Press the button or EXIT button to stop playing. Press the button to return back to previous page. The first few seconds of the selected media will be shown in the video window. E-Book Press the / buttons to select E-Book Manager in the main menu, then press the ENTER button to open. Press the EXIT button to return back to the previous menu. Press / to select the file, then press the ENTER or button to view 42 43

24 Built-in DVD Player Operation Built-in DVD Player Operation (Cont.) 44 45

25 Built-in DVD Player Operation (Cont.) ITIAL SETTGS (DVD) Built-in DVD Player Operation (Cont.) - - General Setup Page - - TV Display Wide OSD Lang Eng Captions Off Last Memory Off - - Preference Page - - TV Type Audio Subtitle Disc Menu Parental Password Default NTSC Eng Eng Eng Go To Preference Page 1. TV DISPLAY: Sets the screen ratio options are: Normal/PS (4:3 Pan Scan), Nomal/PS (4:3 Letter Box) and Wide (16:9). The default setting is wide. 2. OSD Lang: Sets the OSD Language options. The default is English. 3. CAPTION: Play captions on supported DVD titles, Options: ON/OFF. 4. LAST MEMORY: Play DVD from last playback point. Options are: ON/OFF. - - General Setup Page - - Downmix STR Go To Speaker Setup Page 1. LT/RT: Logic Surround stereo audio output. This matrix-based coding process enables stereo audio tracks to carry four channels (left, center, right and surround) of audio data for surround sound amplifiers. 2. Stereo: Analog stereo audio output. The player sends the subwoofer and speech signals to the TV s speakers. 1. TV Type: The DVD player supports output of various systems including Multi, NTSC, PAL. The default setting is PAL and this should not need to be changed. 2. Audio: DVD language selection options. 3. Subtitle: This player can display DVD subtitle languages if supported by the DVD disc. When playing DVD s, you can hide the subtitle or choose any of them as the current subtitle language. 4. Disc menu: DVD Disc menu language selection options. 5. PARENTAL: This function disables playback of specific DVD s which may be unsuitable for children. Some DVDs are encoded with specific rating levels. lf the rating level of the disc is higher than that preset in this menu, playback of the disc will be prohibited. After selecting one of the PARENTAL codes, the screen will display the PASSWORD page. The default password is 8888". 6. PASSWORD [DVD only]: Allows you to change the current PASSWORD. 7. Default: This option will return the DVD to it s factory default settings

26 Built-in DVD Player Operation(Cont.) Title Search [DVD] Press [GOTO], then press the number buttons to enter the desired title number. Repeat Playback Press [REPEAT] during playback to activate repeat mode: Built-in DVD Player Operation(Cont.) Subtitle language [DVD] If the DVD you are watching has subtitles, press [SUBTITLE] repeatedly during playback until the desired subtitle language appears on the TV screen. Example: SUBTITLE 01/03 ENG NOTE: Not all discs support this function. Chapter Title All O? Audio soundtrack language (multilanguage) [DVD] This function works only with discs that have multiple audio soundtrack languages recorded. Press [AUDIO] repeatedly during playback until the desired language appears on the TV screen. NOTES: When the desired language is not selected, even though the button is pressed, the language is not available on the disc. If the language is not recorded on the disc, only the available language on the disc will be heard. When you turn off the power or change the disc, you have to select the language again. l On-screen information Press [DISPLAY] repeatedly to show the disc information available (Title, Chapter, Title elapsed playing time, Language, etc.). l l Picture/JPEG CD playback To start a slide show from the thumbnail pictures: 1. Press / / / to select the desired picture. To go to the next or previous thumbnail pictures, press or. 2. Press [OK] or / (Play) to start the slide show from the selected picture. During the slide show: PRESS to pause. Press (Play) to continue. PRESS or to skip to the next or previous file. If the picture appears upside down or sideways, press / / / to flip/rotate the picture

27 Cleaning and Maintenance Troubleshooting WARNG! For your personal safety, be sure to disconnect the power adaptor before proceeding with any maintenance or cleaning. Cleaning the TV screen Do not touch the TV screen with sharp objects. Use a clean, soft cloth to wipe off any dust and fingerprints from the TV screen surface. Wipe in a straight motion from the center of the TV panel to the outside. Do not clean the screen with water or chemical cleaners, as this may damage the TV screen surface. Never use chemicals such as household cleaning sprays, antistatic sprays or fluids, benzene or thinner to clean the TV screen. Cleaning the main unit Dust the TV set by wiping the screen and cabinet with a soft, clean cloth. If necessary, wipe the outside of the unit with a clean, soft cloth, moistened with lukewarm water. Do not use benzene, thinner or alcohol as these chemicals will smudge the surface finish. Maintenance Do not dismantle this product by yourself, as this may cause damage. There are no user-serviceable parts contained in the TV set. If your TV set has been damaged, contact the after sales support line for advice or take it to a local service center for inspection or repair. No liability can be accepted for any damage caused by non-compliance with these instructions or any other improper use or mishandling of appliance. This product should not be adjusted or repaired by anyone except properly qualified personnel

28 Troubleshooting (Cont.) Specifications *As RV Media continually strives to improve its products, Specifications may be subject to change without notice. Warranty This product is backed up with a Nationwide 2-Year Warranty. Camec Warranty Helpline: V1.0