Nissan Techmate Video Borescope. J Tech Cam. User Guide INSPECTION TOOL

Transcription

1 Nissan Techmate Video Bescope J Tech Cam INSPECTION TOOL August Rev A

2 Nissan Techmate Video Bescope Table of Contents Introduction 3 Features 3 Structure 3 Components 3 Initial Set-Up 4 Attaching Camera 4 Attaching Monit 4 SD Memy Card 5 Monit Reset Procedure 5 To Connect USB Cable 5 To Connect Monit Power 5 Monit 5 Basic Operation 6 Recding Video 6 Taking Photos 7 Playback Videos Pictures 7 Deleting Videos Pictures 8 How to Enter the Setting Mode 8 Language Setting 9 Video System Setting 9 Fmatting 9 Default Setup 9 View Version Infmation 9 Date/Time Setting 9 Frame Rate Setting 10 Time Stamp Setting 10 Event Playback 10 PC Software Use 10 Specifications 11 FCC Infmation 11 Troubleshooting 12 Parts List 12 Warranty 13 Page 2

3 Nissan Techmate Video Bescope Introduction The Tech. Cam is a precision tool designed to allow a technician to view into inaccessible locations. It has a detachable wireless monit that enables the image to be viewed while the camera is in a confined area. The images and video can be saved onto the monits memy and transferred to a PC. These files and images can then be distributed f inspection. Features Allows f easy surveying of small, hard-to-reach places. Mini 5.5mm waterproof LED lens, 1.0 meter flexible tube. Manufactured and tested to IP67 waterproof standard. 3.5-in. TFT-LCD detachable/mountable monit, built-in rechargeable Li-battery. Video recding capability, suppts up to 32GB micro SD card. Adjustable brightness on lens-mounted LED light. Lightweight, hand-held design, flexible and convenient to use. Multi-language suppt. Components Camera Handle Assembly LCD Monit USB Cable Power Adapter Not Pictured Not Pictured Not Pictured SD Card Camera Flexible Tube 90 Mirr AA Batteries Case Structure Extension plug Mini 5.5mm water-proof LEDs lens Power indicat Page 3

4 Nissan Techmate Video Bescope Initial Set-up To Install Batteries in the camera handle: 1. Remove the battery cover as illustrated below. Attaching Camera To connect the flexible tube camera with control handle, first make sure that the keyed end of the tube is aligned with the slot in the handle, then use slight fce to push them together. Once properly aligned, twist the threaded knob clockwise until the connection is securely in place. Keyed end plugs into socket Fasten the threaded knob 2. Remove battery compartment and insert four AA batteries into their appropriate slots, with proper ientation, as indicated on the battery compartment. Attaching Monit To attach the monit, place the slot on the back of the monit over the tab on the camera handle. Push down on the monit until it clicks into place. Slide the monit 3. Reinstall battery compartment and replace battery cover. Installed successfully Page 4

5 Nissan Techmate Video Bescope SD Memy Card After SD card is successfully inserted into SD card slot, an SD card icon will appear on the monit screen; otherwise, the no SD card icon will show. Monit Reset Procedure If the monit appears to be locked up unresponsive, reste the facty defaults. To do this, insert a paper clip into the hole located on the back of the monit labeled reset and depress the reset button using the paper clip. To Connect USB Cable Use the provided USB cable to connect the monit to any PC with a USB slot. Your computer should automatically recognize the new hardware, which you may browse by double-clicking on the My Computer icon on your desktop, and then navigating into the Mobile Disk directy. To Connect Monit Power Connect the monit to an appropriate ( V - 50/60Hz) power source with the provided adapter to charge and the charging icon will flash on the LCD screen the status indicat lights yellow. Turned off, the status indicat lights red during charging. Monit Delete file/ zoom in picture Power ON/OFF Video out USB pt Micro SD card slot Power pt Right OK Reset Left Play video Recd video Take photo Microphone Menu Signal output Fixed socket Page 5

6 Basic Operation 1. As you roll the power switch to turn on the camera, the power indicat on the camera handle will light. The rolling switch then acts as a dimmer f the twin LEDs that surround the camera on the end of the flexible tube. Recding Video 1. In real-time moniting mode, press the button on top of the monit to begin recding. 2. Press again to stop recding. Battery Capacity Signal Strength Recding 2009/02/11 14:50:40 1.5x 2009/02/11 14:50:40 00:05:43 Multiple of the Current Video to Enlarge SD Card Icon Recded Time Twin LEDs provide light Current Date/Time Time Stamp 2. Press and hold the button on the top of the monit f 2 seconds until the picture from the lens in displayed on the monit. Note: The video will be automatically saved as an individual file every 30 minutes. In real-time moniting mode only, Video recding can be conducted by Memy Full! appears on the LCD screen indicates that the SD card memy is full. Page 6

7 Nissan Techmate Video Bescope Taking Photos In real-time moniting mode, press the take a photo. button to Note: In real-time moniting mode only, taking photos can be conducted by Memy Full! appears on the LCD screen indicates that the SD card memy is full. Playback Videos Pictures 1. In real-time moniting mode, press the button to toggle to the video/picture folder. 2. Press the end and buttons on bottom of the monit to select your desired folder, and then press the OK button to toggle to the right interface. Rewind: press and hold on the button f about 2 seconds (In the fast-fward rewind mode, press the OK button to return to nmal play mode.) Stop/Exit: press the MENU button 4. F view pictures: Press the button to select your desired video, press OK button to view and press again to exit. Note: In real-time moniting mode only, taking photos can be conducted by 00:00:04 00:03: :53:00 CH2 15:53:00 CH2 15:53:03 CH2 15:56:40 CH2 15:59:03 CH2 16:05:17 CH2 0001/0006 Indicates video file Indicates picture file 2010/04/27 15:35:23 Note: Mark next to a file name indicates that the file is a video, and mark next to a file indicates that the file is a picture. 3. F playback video: Press the button to select your desired video, and then press OK button to playback. Pause: press the OK button once to pause, press again to resume play Fast fward: press and hold on the f about 2 seconds button Page 7

8 Deleting Videos Pictures 1. In real-time moniting mode, press the button to toggle to the video/picture folder. 2. Press the button to select your desired folder, and then press OK 3. Press the button to select your desired file, and then press button on the top of the monit. Press the button to toggle between and, that is, to cancel delete. Once you have highlighted your desired selection, press OK :53:00 CH2 15:53:00 CH2 15:53:03 CH2 15:56:40 CH2 15:59:03 CH2 16:05:17 CH2? 0001/0006 Deleting folders Deleting a folder is done in the same way as deleting a single file ? 0001/0006 How to enter the Setting Mode In real-time moniting mode, press the MENU SYSTEM SETTING Note: In real-time moniting mode only, deleting videos pictures can be conducted by Page 8

9 Nissan Techmate Video Bescope Language Setting Default Setup 1. In the setting mode, press the button to select SYSTEM SETTING, and then press OK 1. In the setting mode, press the button to select SYSTEM SETTING, then press OK 2. Press the button to select Language, then press OK button, the following interface will appear: 2. Press the button to select Default Setup and then press OK Language 3. Press the button to toggle between YES and NO, that is to reste default cancel. Once you have highlighted your desired selection, press OK View Version Infmation OK 3. Press the language. English button to select a desired 4. Press OK button to confirm and exit. Video System Setting 1. In the setting mode, press the button to select SYSTEM SETTING, then press OK 1. In the setting mode, press the button to select SYSTEM SETTING, and then press OK 2. Press the button to select Version and then press OK You will now be able to view the version details of your product. Date/Time Setting 1. In the setting mode, press the button to select Date/Time and then press OK The right interface will appear: 2. Press the button to select Video System and then press OK Date/Time 3. Press the button to toggle between PAL and NTSC. Once you have highlighted your desired selection, press OK Fmatting 1. In the setting mode, press the button to select SYSTEM SETTING, and then press OK 2. Press the button to select Fmat, and then press OK 2011 / 02 / : 51 OK Year 2. Press OK button to select Date Time, press the button to adjust selection, and then press the MENU button to confirm and exit. 3. Press the button to toggle between YES and NO, that is, to fmat cancel. Once you have highlighted your desired selection, press the OK Page 9

10 Nissan Techmate Video Bescope Frame Rate Setting 1. In the setting mode, press the button to select RECORDER SETTING, and then press OK 2. Press the button to select Frame Rate and then press OK 3. Press the button to toggle between different frame rates. Once your desired rate is selected, press OK button to confirm and exit. Time Stamp Setting 1. In the setting mode, press the button to select RECORDER SETTING, and then press OK 2. Press the button to select Time Stamp and then press OK 3. Press the and buttons to toggle between On and Off. Once your desired selection is made, press OK button to confirm and exit. PC Software Use To download recded files to PC: 1. Connect the USB cable from the monit to the laptop and power on the monit. 2. The dialogue box should start automatically. Select copy pictures to a folder. 3. The wizard will then guide you through the download process. Note: You can also browse the files manually by clicking My Computer. Event Playback 1. In the setting mode, press the button to select EVENT PLAYBACK and then press OK 2. Refer to user manual instructions on Playback of Video/Picture, Deleting Video/Picture, and Deleting Folder f guidance. Page 10

11 Nissan Techmate Video Bescope Specifications Camera Receiver Items Specifications Imaging Sens 1/12-in. CMOS Total Pixels 720x525 View Angle 60º Transmission Frequency 2468MHz Minimum Illumination 0 Lux Modulation Type FM Bandwidth 18MHz Power Supply 4 x AA batteries Unobstructed Effective Range 10m Waterproof Capacity IP67 (Only f imager head) LCD Screen Type 3.5-in. TFT-LCD Effective Pixels 320 (R.G.B.) x 240 Video System PAL/NTSC Transmission Frequency 2468MHz Exteri Supply Voltage 5v DC Consumption Current (Max.) 500mA (Max.) Charge Time 4 hours Wk Time 2 hours Picture Fmat.jpg Video Fmat.AVI Built-in Li-Battery Capacity 1200mAh/3.7V Memy and Size Max. 32GB of Micro SD Card Picture/Video Resolution 640 x 480 Frame Rate 30 frame/second Receiving Sensitivity -85dBm Operating Temperature -10~50ºC/14~122ºF Operating Humidity 15~85%rh FCC Infmation This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference; 2. This device must accept any interference received, including interference that may cause undesired operation. Changes modifications not expressly approved by the party responsible f compliance could void the user s authity to operate the equipment. Page 11

12 Nissan Techmate Video Bescope Troubleshooting Problem Possible causes Possible Solutions Tool will not start power on Camera handle assembly will not power on LCD monit will not power on Camera tube will not light Image on the LCD display is too dark there is no image LCD Monit not charged LCD Monit needs to be reset Camera handle might have problem Camera flexible tube might be bad AA batteries in Camera Handle Assembly need charging replacement Camera Handle Assembly might be defective Power adapter cable not attached properly to LCD Monit Power adapter cable not connected to power LCD monit might not have adequate charge Camera tube might not be properly attached Camera handle might not be on charged Camera tube might be bad LEDs near camera need adjustment Camera tube might not be properly attached Use power adapter to charge LCD monit Replace AA batteries in the Camera Handle Assembly Perfm LCD monit reset procedure (see page 6 in user guide) Continue detailed troubleshooting Ensure AA batteries are charged new Rotate switch to the on position Make sure power adapter cable is connected crectly at the LCD monit connection point Make sure the power adapter cable is securely plugged into the 110 VAC wall socket LED on left side of monit is on but there is no display, might be bad monit Ensure that the camera handle assembly has power and is on Use dial on camera handle assembly to adjust brightness of LEDs Reattach camera tube Try the other camera tube from the kit Make sure monit is set to CH4 Parts List Service P/N J J J J J Description Monit, Power Adapter US Camera Handle Assembly LCD Monit, 3.5-in. 90º Mirr Attachment 1-meter-long camera, flexible-tube cable with 5.5mm outside diameter Page 12

13 Nissan Techmate Video Bescope Warranty THIS WARRANTY IS EXPRESSLY LIMITED TO ORIGINAL RETAIL BUYERS OF BOSCH ELECTRONIC DIAGNOSTIC TOOLS ( UNITS ). The following Bosch parts are warranted against defects in materials and wkmanship f one year (12 months from date of delivery: 5.5mm camera, Camera handle assembly, and LCD monit. The accessies are covered f 90 days. This warranty does not cover any part that has been abused, altered, used f a purpose other than that f which it was intended, used in a manner inconsistent with instructions regarding use. The sole and exclusive remedy f any part found to be defective is repair replacement, at the option of Bosch. In no event shall Bosch be liable f any direct, indirect, special, incidental consequential damages (including lost profit) whether based on warranty, contract, tt any other legal they. The existence of a defect shall be determined by Bosch in accdance with procedures established by Bosch. No one is authized to make any statement representation altering the terms of this warranty. THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Unit software is proprietary, confidential infmation protected under copyright law. Users have no right in title to Unit software other than a limited right of use revocable by Bosch. Unit software may not be transferred disclosed without the written consent of Bosch. Unit software may not be copied except in dinary backup procedures. F questions regarding Replacement Parts, New Orders Technical Suppt, contact TECH MATE Customer Service at: Page 13

14 Copyright No part of this manual may be reproduced, sted in a retrieval system transmitted, in any fm by any means, electronic, mechanical, photocopying, recding, otherwise, without the pri written permission of Bosch. Disclaimer All infmation, illustrations, and specifications contained in this technical instruction manual are based on the latest infmation available at the time of publication. The right is reserved to make changes at any time without obligation to notify any person ganization of such revisions changes. Further, Bosch shall not be liable f errs contained herein f incidental consequential damages (including lost profits) in connection with the furnishing, perfmance use of this material Rev A Bosch Automotive Service Solutions Inc. August 2015