User s Guide INCH TOUCH SCREEN DIGITAL PICTURE FRAME Part Number DPF-10QTCH. Display digital pictures without a computer Play MP3 audio files

Transcription

1 CLAIMS & WARRANTIES In case of possible product defects, please contact our customer support center. We recommend saving your purchase receipt. Service: For technical questions, information about our products, and spare part orders please contact us via , phone, or visit our website: Website: com Phone: Address: SP by Design Inc Research Drive Irvine, CA USA Important Note: Please do not send your device to our address without having been requested to do so by our service team. The costs and the risk of loss for unsolicited mailings will be borne by the sender. We reserve the right to refuse the acceptance of unsolicited mailings or return the corresponding merchandise to the sender carriage forward, that is, at the sender s expense. Warranty: If for any reason the registered product does not function as it should due to factory defects, it can be serviced within 90 Days from the date of purchase. This warranty does not cover failures due to abuse, misuse, accident, or unauthorized alterations or repairs. In no event will SP by Design Inc. be liable for any incidental, special, indirect, or consequential damages resulting from the use, misuse, or inability to use this product. Made in China 10.4-INCH TOUCH SCREEN DIGITAL PICTURE FRAME Part Number DPF-10QTCH Display digital pictures without a computer Play MP3 audio files User s Guide Inch Digital Picture Frame User s Guide

2 TROUBLESHOOTING Trouble Probable Cause Suggested Remedy The Digital Picture Frame doesn t power on. The AC adapter connector is not inserted fully into the frame. When you connect the AC adapter to the frame and power up the unit, the frame should enter the Slideshow mode. Without a memory card installed and no picutes in the frame s memory, an empty thumbnails screen should display. If the screen remains blank Make sure the AC adapter connector is fully inserted into the frame. If you plug the AC adapter into a switched wall outlet, make sure the switch is turned on. The thumbnails The memory card is not Make sure the memory card is screen is blank installed correctly. properly installed (for CF cards, with the label facing the front of the frame; for SD/MMC/XD/MS cards, with the label facing the rear of the frame). Make sure you are using a supported memory card. No photos on the The memory card is not Make sure the memory card is memory card installed correctly. properly installed (for CF cards, with the label facing the front of the frame; for SD/MMC/XD/MS cards, with the label facing the rear of the frame). Make sure you are using a supported memory card. One or more photos won t display The photos are saved in an incompatible file format. Make sure there is at least one supported (JPEG) photo file on the memory card Inch Digital Picture Frame User s Guide 43

3 TECHNICAL SUPPORT FREQUENTLY ASKED QUESTIONS Q: Does the Digital Picture Frame use touch-enabled technology? A: Yes, the frame can be operated using the touch screen. You may also use the buttons located on the top edge of the frame or the Remote Control to operate the Digital Picture Frame. Q: If I keep showing the same photo for a long time, will it damage the LCD screen? A: No. The Digital Picture Frame can display the same photo continuously for extended periods. However, it is recommended that you change photos once a month. Q: Does the Digital Picture Frame have built-in memory? A: Yes. The Digital Picture Frame has 512 Mbytes of internal memory for storing your photos and audio files. Files can be copied from a currently installed memory card or transferred from a personal computer (PC) using a USB cable (purchased separately. Q: What is the maximum picture size? A: The Digital Picture Frame is able to display pictures up to 10 Megapixels. Q: What is the best picture resolution displayed on the screen? A: The frame s best resolution is 640 x 480. Q: Why won t some of my photos display on the Digital Picture Frame? A: The Digital Picture Frame is designed to show photos following Joint Photographic Experts Group (JPEG) format. This is the same camera industry standards format as digital cameras. Images, such as web images, scanned images, or photos in RAW format are not stored according to camera industry standards and cannot be displayed correctly on the Digital Picture Frame. Most graphics software applications will let you convert images stored in incompatible formats to the JPEG format. Refer to the documentation provided with your software application for details. CONTENTS INTRODUCTION...1 FEATURES...1 SPECIFICATIONS...2 GETTING STARTED...3 PACKAGE CONTENTS...3 UNPACKING, ASSEMBLY AND POSITIONING...3 OPERATION...4 FRAME CONTROLS...4 TOUCH SCREEN CONTROLS...6 Thumbnails Screen Controls...6 Audio Directory Controls...7 Photo Display Controls...8 REMOTE CONTROL...10 SETTING UP THE FRAME...12 Installing the Memory Card...12 USING THE FRAME CONTROLS...13 Viewing Photos...13 USING THE TOUCH SCREEN...14 Selecting the Operating Mode...14 Viewing Photos...15 Viewing Selected Photos...16 Playing Music...16 USING THE REMOTE CONTROL...17 Viewing Photos...18 Viewing Selected Photos...19 Playing Music...19 Playing Selected Songs...20 SETUP MENU FUNCTIONS USING THE REMOTE CONTROL...21 Selecting the Display Source...21 Selecting the Operating Mode...22 Selecting the Display Language...23 Setting Up the Slideshow...23 Setting the Photo Effect...24 Adjusting the Image Display...24 Setting the Music Repeat Option...25 Enabling Slide Music...26 Calibrating the Touch Screen Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide i

4 Resetting Options...27 SETUP MENU FUNCTIONS USING THE TOUCH SCREEN...28 Selecting the Display Source...28 Selecting the Operating Mode...29 Selecting the Display Language...29 Setting Up the Slideshow...30 Setting the Photo Effect...30 Adjusting the Image Display...31 Setting the Music Repeat Option...32 Enabling Slide Music...32 Calibrating the Touch Screen...33 Resetting Options...33 DOWNLOADING FILES...34 DOWNLOADING FILES USING THE REMOTE CONTROL...35 Downloading Files from a Memory Card...35 Downloading Files from a PC...36 Deleting Files from Memory...37 DOWNLOADING FILES USING THE TOUCH SCREEN...38 Downloading Files from a Memory Card...38 Deleting Files from Memory...39 CARE AND MAINTENANCE...41 TECHNICAL SUPPORT...42 FREQUENTLY ASKED QUESTIONS...42 TROUBLESHOOTING...43 CLAIMS & WARRANTIES...44 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CARE AND MAINTENANCE Us e the following guidelines to keep your Digital Picture Frame in good operating condition, and to avoid possible damage to the unit. The Digital Picture Frame is for indoor use only. DO NOT use the unit outdoors, or place the unit where it may be affected by harsh environmental conditions (such as near an open window, or on a screened patio). To reduce the risk of fire or electric shock; DO NOT expose the unit to rain or moisture. DO NOT block the ventilation holes on the back of the Digital Picture Frame at any time. These holes allow the heat generated by the unit when it is powered to be released. Blocking the ventilation holes may result in overheating and damage to the unit. DO NOT use liquid cleaners or abrasives on the Digital Picture Frame. Clean dust from the frame and LCD display by wiping with a clean, dry cloth. Keep your Digital Picture Frames out of sunlight. Direct sunlight may cause damage to the unit. DO NOT open the case of the Digital Picture Frame. There is a risk of electric shock, and there are no user serviceable parts inside. Opening the case will void your warranty. Do not use the Digital Picture Frame if conditions could allow condensation to occur, or damage may result. Your Digital Picture Frame is a complicated electronic device and cannot withstand excessive shock. TAKE CARE when moving the unit to avoid dropping or otherwise jarring the unit. ii 10.4-Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 41

5 If you wish to delete audio files, access the audio directory for the computer s internal memory. 2. Touch the screen once to display the toolbar, then use the LEFT, RIGHT, UP and DOWN buttons as appropriate to highlight the first photo you wish to delete. 3. Touch the SELECT button to select the photo. A checkmark displays in the upper right corner of the thumbnail. 4. To unselect a photo or audio file, use the LEFT, RIGHT, UP and DOWN buttons as appropriate to highlight a selected photo/file, then press the SELECT button. The checkmark is removed. 5. Repeat steps 2 through 4 to select or unselect additional photos. 6. When all the desired photos have been selected, touch the SETUP button to display the Setup Menu. 7. Touch Delete jpg file. A confirmation message displays. 8. Touch the desired option. If you select Yes, a status message displays while the photo(s)/file(s) are being deleted. When the deletion is complete, the status message and Setup Menu close automatically. If you select No, the photos/files are not deleted from the frame s internal memory. Touch EXIT twice to close the menu. INTRODUCTION Congratulations on purchasing the 10.4-Inch Touch Screen Digital Picture Frame. This unit lets you view digital pictures directly from your camera's memory cards. No computer, digital camera or Internet connection is needed. You can display a single picture or a slide-show of all the pictures on a memory card. You can also play MP3 audio files through the internal speaker. The frame includes 512 Mbytes of memory for storing your photo and audio files. File transfer requires a PC and USB-A to USB 5-Pin Mini-B cable (provided with the frame). Before operating the unit, please read this manual thoroughly, and keep it for future reference. This manual will help you use many of the exciting and useful features that will make your Digital Picture Frame viewing more enjoyable. This Digital Picture Frame is compatible with the following popular memory card formats: xd, Memory Stick (MS) and Memory Stick Pro, SD, MultiMediaCard (MMC) Picture Cards and Compact Flash (CF) Memory Cards, FEATURES Displays digital pictures saved in Joint Photographic Experts Group (JPEG) format without a computer. Simply insert a compatible memory card (not included) into the Digital Picture Frame to display photos. Compatible with most digital cameras stored JPEG images files. Supports image sizes of up to 10 Megapixels. Bright 10.4-inch thin film transistor (TFT) active matrix liquid crystal display (LCD) screen. 512 Mbytes of internal memory for file storage. Automatic slide show feature with multiple transition effects. Plays MP3 audio files through the frame s internal speaker. Pushbutton controls and on-screen menus let you access all features and functions Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 1

6 SPECIFICATIONS Function Specification Screen Size 10.4 inches Screen Resolution 640 x 480 Brightness 350 cd/m 2 Contrast 300 Viewing Angle U/D/L/R: 40º/70º/70º/70º Screen size Mode 4 : 3 USB USB SLAVE / USB HOST JPEG Support 8K x 8K Pixel, Support up to 8MB files JPEG Format Baseline MP3 Support NAND FLASH 512 Mb Memory Card SD/MMC/MS/XD/CF Power Requirements 12 V Operating Temperature -20ºC ~ 65ºC Storage Temperature -30ºC ~ 75ºC Minimum System Requirements Microsoft Windows XP (or later) 128 Mb RAM minimum (256 Mb RAM recommended) 600 MHz Processor (or greater) 200 Mb hard disk space available Available USB port 6. Touch the screen once to display the toolbar, then use the LEFT, RIGHT, UP and DOWN buttons as appropriate to highlight the first photo you wish to select. 7. Touch the SELECT button to select the photo. A checkmark displays in the upper right corner of the thumbnail. 8. To unselect a photo or audio file, use the LEFT, RIGHT, UP and DOWN buttons as appropriate to highlight a selected photo/file, then press the SELECT button. The checkmark is removed. 9. Repeat steps 6 through 8 to select or unselect additional photos. 10. When all the desired photos have been selected, touch the SETUP button to display the Setup Menu. 11. Touch Copy jpg file to, then touch Memory. A confirmation message displays. 12. Touch the desired option. If you select Yes, a status message displays while the photo(s) are being downloaded. When the download is complete, the status message and Setup Menu close automatically. If you select No, the photo/file is not downloaded to the frame s internal memory. Touch EXIT twice to close the menu. Deleting Files from Memory If you no longer wish to keep one or more photo and/or audio files in the frame s internal memory, you can delete selected the files from memory. You can use the touch screen to select and delete photos from memory. You must use the Remote Control to select audio files for deletion (see Deleting Files from Memory on page 37 for details). 1. Access the thumbnails display for the computer s internal memory Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 39

7 8. Use the UP or DOWN button to highlight the desired option, then press the ENTER button. If you select Yes, a status message displays while the photo(s)/file(s) are being deleted. When the deletion is complete, the status message and Setup Menu close automatically. If you select No, the photos/files are not deleted from the frame s internal memory. Press the EXIT button twice to close the menu. PACKAGE CONTENTS GETTING STARTED Your Digital Picture Frame includes the following items: DOWNLOADING FILES USING THE TOUCH SCREEN Downloading Files from a Memory Card You can use the touch screen to select and download photos from a memory card. You must use the Remote Control to select audio files for download (see Downloading Files from a Memory Card on page 35 for details). 1. Turn the Digital Picture Frame OFF. 2. Install the memory card containing the files you wish to download. 3. Turn the Digital Picture Frame ON. 4. Touch the screen once to display the toolbar, then touch the EXIT button to display the thumbnails screen. 5. If necessary, use the Select card function from the Setup Menu to access the thumbnails screen for the memory card containing your files (see Selecting the Display Source on page 28 for details). If you wish to download audio files, touch the screen once to display the toolbar, then touch the MODE button to display the audio directory. You must use the Remote Control to select the audio files you wish to download (see Downloading Files from a Memory Card on page 35 for details). Digital Picture Frame with Support Bracket User s Guide AC Adapter Remote Control USB Cable UNPACKING, ASSEMBLY AND POSITIONING Your Digital Picture Frame is easy to assemble, easy to install and easy to use! Remove the Digital Picture Frame, support bracket, AC adapter and remote control from the carton. If you plan to display the frame on a table top, install the support bracket on the back of the frame. Simply insert the support bracket tabs into the slots in the back of the frame. You can position the frame for horizontal or vertical display. Horizontal display is recommended if you plan to use the slide show feature. Hook holes are also provided on the back of the frame for wall mounting. Plug the AC adapter into the connector in the side of the frame, then plug the adapter into a wall outlet. Horizontal Display Vertical Display Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 3

8 OPERATION 5. When all desired photos/files have been copied to the internal memory folder, turn the Digital Picture Frame OFF, and disconnect the USB cable. FRAME CONTROLS 6 UP DOWN ENTER LEFT RIGHT EXIT Deleting Files from Memory If you no longer wish to keep one or more photo and/or audio files in the frame s internal memory, you can delete selected the files from memory. 1. Access the thumbnails display for the computer s internal memory. 1. EXIT button If you wish to delete audio files, access the audio directory for the computer s internal memory. When in Single Photo or Slideshow display mode, returns the frame to the thumbnails display. 2. Use the LEFT, RIGHT, UP and DOWN buttons as appropriate to highlight the first photo or audio file you wish to delete. When in Setup mode, exits the Setup menu. 2. RIGHT button 3. Press the SELECT button to select the photo/audio file. When viewing the thumbnails screen or in Single Photo display mode, scrolls forward through the available photos. When in Setup mode, displays the submenu for the currently selected option. If you selected a photo, a checkmark displays in the upper right corner of the thumbnail. If you selected an audio file, a checkmark displays to the right of the file name. 3. LEFT button 4. To unselect a photo or audio file, use the LEFT, RIGHT, UP and DOWN When viewing the thumbnails screen or in Single Photo display mode, scrolls buttons as appropriate to highlight a selected photo/file, then press the SELECT backward through the available photos. button. When in Setup mode, closes the submenu for the currently selected option. The checkmark is removed. 4. ENTER button 5. Repeat steps 2 through 4 to select or unselect additional photos or audio files. When viewing the thumbnails screen, returns to the Single Photo display mode. When in Slideshow mode, pauses and resumes the Slideshow. When the frame is in Single Photo mode, the ENTER button is non-functional. You must use the Touch Screen to place the frame in Slideshow mode (see USING THE TOUCH SCREEN on page 14 for details). When in Setup mode, confirms the current menu selection. 6. When all the desired photos/files have been selected, press the SETUP button to display the Setup Menu. 7. Use the UP or DOWN button to highlight Delete jpg file (for photos) or Delete mp3 file (for audio files), then press the RIGHT button. A confirmation message displays Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 37

9 A confirmation message displays. 5. DOWN button 12. Use the UP or DOWN button to highlight the desired option, then press the When viewing the thumbnails screen, scrolls down through the available photos. ENTER button. When in Setup mode, scrolls forwards through the available menu options. If you select Yes, a status message displays while the photo(s)/file(s) are being 6. UP button downloaded. When the download is complete, the status message and Setup Menu close automatically. If you select No, the photo/file is not downloaded to the frame s internal memory. Press the EXIT button twice to close the menu. 7. POWER switch Downloading Files from a PC 1. Turn the Digital Picture Frame OFF. 2. Connect the Mini-B connector of the USB cable to the USB connector on the Digital Picture Frame. Connect the remaining end of the cable to an available USB port on your computer. 3. Turn the Digital Picture Frame ON. The Digital Picture Frame adds four removable disks to the My Computer directory, one for each memory card slot, and one for the frame s internal memory (this is the final removable disk in the list). Double-click the removable disk for the frame s internal memory to open. 4. Copy the desired photo and audio files from your PC to the internal memory using either of the following procedures: Drag and drop files from your PC s desktop (or other directory) onto the removable disk. Right-click the file you wish to copy, then choose Copy from the shortcut menu. Left-click the removable disk, then choose Paste to add the file to the removable disk. The standard practices for copying photo and audio files may vary between computers. Please consult your computer manual for the directions unique to your computer. When viewing the thumbnails screen, scrolls up (backwards) through the available photos. When in Setup mode, scrolls backwards through the available menu options. Turns power to the Digital Picture Frame on (I) and off (O). 8. Power connector Power connector for the Digital Picture Frame AC adapter. 9. Compact Flash (CF) Memory Card slots Card slot for inserting a CF memory card. 10. USB-A connector Connector slot for inserting a USB 2.0-compatible memory stick. 11. USB Mini-B connector Connector for inserting a USB cable to transfer files from a PC to the Digital Picture Frame. 12. Memory Card slot Slot for inserting the memory card from your digital camera. 13. Support Bracket Supports the Digital Picture Frame for tabletop display I O Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 5

10 TOUCH SCREEN CONTROLS DOWNLOADING FILES USING THE REMOTE CONTROL The controls available through the touch screen depend on the current operating mode of the frame; thumbnails mode, photo mode or audio mode. To access the Touch Screen controls, simply touch the screen once. The Touch Screen toolbar displays at the bottom of the screen. Downloading Files from a Memory Card 1. Turn the Digital Picture Frame OFF. 2. Install the memory card containing the files you wish to download. 3. Turn the Digital Picture Frame ON. Thumbnails Screen Controls 4. Press the EXIT button to display the thumbnails screen. CARD button Lets you select the source for photos, either internal memory or memory card. SETUP button Displays the Setup menu for the thumbnails screen. UP button Scrolls up (backward) through the available photos. DOWN button Scrolls down (forward) through the available photos. LEFT button Scrolls left (backward) through the available photos. RIGHT button Scrolls right (forward) through the available photos. SELECT button 5. If necessary, press the CARD button until the thumbnails screen for the memory card containing your files is displayed. If you wish to download audio files, press the MODE button to display the audio directory. 6. Use the LEFT, RIGHT, UP and DOWN buttons as appropriate to highlight the first photo or audio file you wish to select. 7. Press the SELECT button to select the photo/audio file. If you selected a photo, a checkmark displays in the upper right corner of the thumbnail. If you selected an audio file, a checkmark displays to the right of the file name. 8. To unselect a photo or audio file, use the LEFT, RIGHT, UP and DOWN buttons as appropriate to highlight a selected photo/file, then press the SELECT button. The checkmark is removed. 9. Repeat steps 6 through 8 to select or unselect additional photos or audio files. 10. When all the desired photos/files have been selected, press the SETUP button to display the Setup Menu. 11. Use the UP or DOWN button to highlight Copy jpg file to (for photos) or Copy mp3 file to (for audio files), then press the RIGHT button twice Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 35

11 1. Touch the screen once to display the toolbar, then touch the SETUP button to display the Setup Menu. 2. Touch Reset setting. A confirmation message displays. 3. Touch the desired option. If you select Yes, your custom settings are returned to the factory-default values. If you select No, your custom settings are retained. 4. Touch EXIT to close the menu. DOWNLOADING FILES The Digital Picture Frame provides 512 Mbytes of internal memory for storage of photo and audio files. If you do not wish to store your photos or audio files in the frame s internal memory, you must install a memory card containing the desired photos and audio files. The Digital Picture Frame offers two options for downloading files to the frame s internal memory: You can copy selected files from a currently installed memory card or other memory device. No additional hardware is required to use this option. You can copy files from a personal computer (PC). A computer connection and USB-A to USB 5-Pin Mini-B cable (provided) are required to download files from a PC to the frame s internal memory. REMEMBER! Photo files must be in.jpg format. Files of other formats will not display on the Digital Picture Frame. Audio files must be in.mp3 format. Files of other formats will not play back through the Digital Picture Frame. Lets you select one or more photos for display playback. SLIDESHOW button Exits the thumbnails display and places the frame in slideshow mode. MODE button Toggles the frame between photo and audio modes. Audio Directory Controls CARD button Lets you select the source for audio files, either internal memory or memory card. SETUP button Displays the Setup menu for the audio directory screen. PLAY button Starts playback of the currently selected audio file (the PLAY button is shown only when audio playback is paused or stopped). PAUSE button Pauses playback of the currently active audio file (the PAUSE button is shown only when audio playback is active). STOP button Stops playback of the currently active audio file. UP button Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 7

12 Scrolls up (backward) through the available audio files. DOWN button Scrolls down (forward) through the available audio files. VOL - button Decreases the audio playback volume. VOL + button Increases the audio playback volume. MODE button Toggles the frame between photo and audio modes. Photo Display Controls CARD button Lets you select the source for photos, either internal memory or memory card. SETUP button Displays the Setup menu for the photo screen. EXIT button Exits the Slideshow or Single Photo display mode, and displays the thumbnails screen. ROTATE button 4. Touch EXIT twice to close the menu. When Slide music is enabled, your audio files will play back while the Digital Picture Frame is in Slideshow display mode. If you pause the Slideshow, audio playback is also paused. Calibrating the Touch Screen If you have problems using the touch screen, the Touch Panel Correction feature lets you calibrate the touch screen to ensure proper operation of your Digital Picture Frame. The Touch Panel Correction feature is available from all Setup Menus. 1. Touch the screen once to display the toolbar, then touch the SETUP button to display the Setup Menu. 2. Touch Touch Panel Correction. A confirmation message displays. 3. Touch the desired option. If you select Yes, a red crosshair is displayed in the center of the screen. Touch the crosshair; the crosshair moves to the next calibration position in the upper left corner of the screen. Continue touching the crosshair each time it moves to a new calibration position. When the crosshair is touched at the final calibration position, the screen returns to the Setup Menu. If you select No, the confirmation message closes. 4. Touch EXIT to close the menu. Resetting Options The Reset setting feature lets you reset Setup Menu options to their factory-default settings. The Reset setting feature is available from all Setup Menus Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 33

13 Setting the Music Repeat Option When viewing the frame in Single Photo display mode, rotates the current photo in 90º increments (90º - 180º - 270º - Normal). The Music repeat feature lets you select the repeat option for your audio files. The Music repeat feature is not available when the Setup Menu is accessed from the thumbnails screen, or when the Digital Picture Frame is in Single Photo display mode. LEFT button Scrolls left (backward) through the available photos. 1. Touch the screen once to display the toolbar, then touch the SETUP button to display the Setup Menu. RIGHT button 2. Touch Music repeat to display the available repeat options. Scrolls right (forward) through the available photos. 3. Touch the desired repeat option: SLIDESHOW button None: Playback will cycle once through all available audio files, then stop. Exits the single photo display mode and places the frame in Slideshow mode One: Playback will repeat the current file continuously. (the SLIDESHOW button is shown only when the frame is in Single Photo All: Playback will cycle through all available audio files, then repeat the cycle mode). continuously. PAUSE button 4. Touch EXIT twice to close the menu. When in Slideshow mode, pauses the Slideshow (the PAUSE button is shown only when the frame is in Slideshow mode). Enabling Slide Music PLAY button The Slide music feature lets you enable or disable audio playback while viewing photos in Slideshow display mode. The Slide music feature is not available when the Setup Resumes playback of the Slideshow (the PLAY button is shown only when the Menu is accessed from an audio directory screen, or when the frame is in Single frame is in Slideshow mode and the Slideshow has been paused). Photo display mode. SPEED button 1. Touch the screen once to display the toolbar, then touch the SETUP button to Sets the Slideshow transition speed (display time for each photo in display the Setup Menu. Slideshow mode); either Slow, Normal or Fast (the SPEED button is shown 2. Touch Slide music to display the available options. only when the frame is in Slideshow mode). 3. Touch the desired slide music option: MODE button Select On to enable audio playback when the Digital Picture Frame is in Slideshow display mode. Toggles the frame between photo and audio modes. Select Off to disable audio playback when the Digital Picture Frame is in Slideshow display mode Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 9

14 REMOTE CONTROL 1. ON/OFF button Turns power to the Digital Picture Frame on and off. 2. MODE button Toggles the thumbnails screen between photo and audio modes. 3. UP button When viewing the thumbnails screen, scrolls up (backwards) through the available photos or audio files. When in Setup mode, scrolls backwards through the available menu options. 4. SETUP button Displays the Setup menu for the currently active screen. 5. LEFT button When viewing the thumbnails screen or in Single Photo display mode, scrolls backward through the available photos. When in Setup mode, closes the submenu for the currently selected option. 6. DOWN button When viewing the thumbnails screen, scrolls down through the available photos. When in Setup mode, scrolls forwards through the available menu options. 7. SELECT button Lets you select one or more photos or audio files for display playback Touch the screen once to display the toolbar, then touch the SETUP button to display the Setup Menu. 2. Touch Photo Effect to display the available effect options. 3. Touch the desired effect option: The Color option displays your photos in full color. The Mono option displays your photos in black and white. The Sepia option displays your photos in sepia tones. 4. Touch EXIT twice to close the menu. Adjusting the Image Display Depending on the original size of your photos, the photos may not completely fill the screen. The Photo mode feature lets you digitally stretch or crop your photos to better fit the screen. The Photo mode options only affect the way the photos are displayed on the Digital Picture Frame. The photos on your memory card are not changed. The Photo mode feature is not available when the Setup Menu is accessed from an audio directory screen. 1. Touch the screen once to display the toolbar, then touch the SETUP button to display the Setup Menu. 2. Touch Photo mode to display the available display options. 3. Touch the desired display option: The Auto fit option displays your photos at in their original sizes. The Full option stretches your photos to fill the screen. Your photos may appear slightly distorted when using the Full option. The Pan scan option enlarges your photos to better fit the screen, and crops parts of the photo from the sides, or from the top and bottom, depending on the orientation of the frame and the size of the photo. 4. Touch EXIT twice to close the menu Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 31

15 1. Touch the screen once to display the toolbar, then touch the SETUP button to display the Setup Menu. 2. Touch Language to display the available display languages. A checkmark is shown next to the currently selected display language. 3. Touch the desired display language. The screen refreshes to display the menu in the selected language. 4. Touch EXIT twice to close the menu. 8. CARD button Lets you select the source for photos or audio files, either internal memory or memory card. 9. SLIDESHOW button Exits the thumbnails display and places the frame in slideshow mode. 10. ROTATE button When viewing the screen in Single Photo display mode, rotates the current photo in 90º increments (90º - 180º - 270º - Normal). Setting Up the Slideshow 11. EXIT button The Slide speed feature lets you set the length of time each photo displays before Exits the Slideshow or Single Photo display mode, and displays the transitioning to the next photo. The available intervals are Fast, Normal, and Slow. The thumbnails screen. Slide speed feature is not available when the Setup Menu is accessed from an audio directory screen, or when the frame is in Single Photo display mode. 12. ENTER button 1. Touch the screen once to displa y the toolbar, then touch the SETUP button to When viewing the thumbnails screen, returns to the Single Photo display mode. display the Setup Menu. When in Slideshow mode, pauses and resumes the Slideshow. 2. Touch Slide speed to display the available display intervals. When the frame is in Single Photo mode, the ENTER button is non-functional. 3. Touch the desired slide speed. You must use the Touch Screen to place the frame in Slideshow mode (see USING THE TOUCH SCREEN on page 14 for details). 4. Touch EXIT twice to close the menu. When in Setup mode, confirms the current menu selection. When the Digital Picture Frame is placed in Slideshow display mode, photos will transition at the selected display interval. 13. RIGHT button When viewing the thumbnails screen or in Single Photo display mode, scrolls forward through the available photos. Setting the Photo Effect When in Setup mode, displays the submenu for the currently selected option. Normally, your photos are displayed in full color. The Photo Effect feature lets you stylize your photos by displaying them in sepia tones, or in black and white. The 14. VOL+ button Photo Effect options only affect the way the photos are displayed on the Digital Picture Frame. The photos on your memory card are not changed. The Photo Effect feature is Increases the audio playback volume. not available when the Setup Menu is accessed from an audio directory screen Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 11

16 15. SPEED button Sets the Slideshow transition speed (display time for each photo in Slideshow mode); either slow, normal or fast. 16. VOL+ button Decreases the audio playback volume. SETTING UP THE FRAME BE SURE to turn the Digital Picture Frame OFF before installing or removing a memory card or other memory device. Installing or removing a memory card with the power ON may damage the card or the frame. Installing the Memory Card 1. Remove the memory card from your digital camera. Refer to the User s Guide for your digital camera for instruction to safely remove the memory card from the camera. 2. Insert the memory card or memory stick into the appropriate slot in the side of the frame. BE SURE the label on the memory card faces the back of the frame. The memory card should slide easily into the slot. DO NOT force the memory card into the slot, Forcing the card may damage the Digital Picture Frame or the memory card. If the memory card does not slide easily into the slot, BE SURE you are using a supported memory card, and that the card is oriented properly. You can install a single digital camera memory card, or you can install a separate memory device in each available slot. Compact Flash (CF) Cards and memory sticks are installed in a similar manner. A checkmark is shown next to the currently selected source. 3. Touch the desired source for your photo and audio files. If the Select card feature was accessed from the Main Setup Menu, the menu closes and the thumbnails screen for the selected memory source displays. If the Select card feature was accessed from the Photo Setup Menu, the menu closes and the first photo on the selected memory source displays. If the Select card feature was accessed from the Audio Setup Menu, the menu closes and the audio directory for the selected memory source displays. Selecting the Operating Mode The Select mode feature lets you set the operating mode for the Digital Picture Frame to Photo or Music. The Select mode feature is available from all Setup Menus. 1. Touch the screen once to display the toolbar, then touch the SETUP button to display the Setup Menu. 2. Touch Select mode to display the available operating modes. A checkmark is shown next to the currently selected operating mode. 3. Touch the desired operating mode. If Music is selected, the menu closes and the audio directory for the currently selected memory source displays. If Photo is selected, the menu closes and the thumbnails display for the currently selected memory source displays. Selecting the Display Language The Language feature lets you select the display language for the menus, prompts, and other text information shown on the Digital Picture Frame. The available languages are En glish, French and Spanish. The Language feature is available from all Setup Menus Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 29

17 4. Press the EXIT button to close the menu. USING THE FRAME CONTROLS SETUP MENU FUNCTIONS USING THE TOUCH SCREEN The Digital Picture Frame includes several features that let you customize the way the frame operates to suit your tastes. The setup menus can be accessed while viewing the thumbnails display or audio directory, or with the frame in Single Photo or Slideshow display mode. Some features are available from all Setup Menus. Other features are available through a specific Setup Menu only. The following paragraphs describe the steps to customize your Digital Picture Frame using the touch screen. Optionally, you can use the Remote Control to customize your Digital Picture Frame. See SETUP MENU FUNCTIONS USING THE REMOTE CONTROL on page 21 for details. Selecting the Display Source You can display photos and play back studio files from the Digital Picture Frame s internal memory, or from a memory device connected to the frame. The Select card feature lets you select the source for your photos and audio files. The Select card featur e is available from all Setup Menus. 1. Touch the screen once to display the toolbar, then touch the SETUP button to display the Setup Menu. 2. Touch Select card to display the available options. The options listed depend on the memory device(s) that are currently connected to the frame. The buttons on the Digital Picture Frame provide the controls for basic operation of the frame. To access advanced feature and functions, refer to USING THE TOUCH SCREEN and USING THE REMOTE CONTROL. When your memory card is properly installed in the Digital Picture Frame, turn the POWER switch ON. The Digital Picture Frame enters the Slideshow mode. Press the EXIT button to display the thumbnails screen. The thumbnails screen shows a preview of all photos contained on the memory card. If a memory card is not installed, the thumbnails screen shows a preview of all photos in the frame s internal memory. Viewing Photos Use the LEFT, RIGHT, UP and DOWN buttons to scroll the screen backward and forward through the available photos. The currently selected photo is bordered in blue. Press the ENTER button to enter the Single Photo display mode, and display the currently selected photo. Use the LEFT and RIGHT buttons to scroll backward and forward through the available photos. When the frame is in Single Photo mode, the ENTER button is non-functional. You must use the Touch Screen to place the frame in Slideshow mode (see USING THE TOUCH SCREEN on page 14 for details). When the frame is in Slideshow mode, press the ENTER button to pause the Slideshow. The Pause PAUSE ( ) icon shows briefly on the screen, and the currently selected photo is displayed Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 13

18 Press the ENTER button again to resume the Slideshow. The Play ( ) icon shows briefly on the screen, followed by a slideshow of all available photos on the memory card. Press the EXIT button to return to the thumbnails screen. USING THE TOUCH SCREEN The Touch Screen lets you use the advanced features and functions of the Digital Picture Frame, as well as providing access to the Setup menus. Operation is accomplished directly from the frame. To operate the Digital Picture Frame using the Remote Control, refer to USING THE REMOTE CONTROL. For basic operation of the frame, refer to USING THE FRAME CONTROLS. The controls available through the touch screen depend on the current operating mode of the frame; thumbnails mode, photo mode or audio mode. To access the Touch Screen controls, simply touch the screen once. The Touch Screen toolbar displays at the bottom of the screen. Touch a toolbar button to perform the associated function. The toolbar closes automatically after a few moments if you do not make a selection. Selecting the Operating Mode When your memory card is properly installed in the Digital Picture Frame, turn the POWER switch ON. The Digital Picture Frame enters the Slideshow mode. With the frame in Slideshow mode, touch the screen once to display the toolbar, then touch the EXIT button to display the thumbnails screen. From the thumbnails screen, touch the screen once to display the toolbar, then touch the MODE button to display the audio directory screen. 2. Use the UP or DOWN button to highlight Touch Panel Correction, then press the RIGHT button. A confirmation message displays. 3. Use the UP or DOWN button to highlight the desired option, then press the ENTER button. If you select Yes, a red crosshair is displayed in the center of the screen. Touch the crosshair; the crosshair moves to the next calibration position in the upper left corner of the screen. Continue touching the crosshair each time it moves to a new calibration position. When the crosshair is touched at the final calibration position, the screen returns to the Setup Menu. If you select No, the confirmation message closes. 4. Press the EXIT button to close the menu. Resetting Options The Reset setting feature lets you reset Setup Menu options to their factory-default settings. The Reset setting feature is available from all Setup Menus. 1. Press the SETUP button to display the Setup Menu. 2. Use the UP or DOWN button to highlight Reset setting, then press the RIGHT button. A confirmation message displays. 3. Use the UP or DOWN button to highlight the desired option, then press the ENTER button. If you select Yes, your custom settings are returned to the factory-default values. If you select No, your custom settings are retained Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 27

19 Enabling Slide Music The Slide music feature lets you enable or disable audio playback while viewing photos in Slideshow display mode. The Slide music feature is not available when the Setup Menu is accessed from an audio directory screen, or when the frame is in Single Photo display mode. 1. Press the SETUP button to display the Setup Menu. From the audio directory screen, touch the screen once to display the toolbar, then touch the MODE button to display the thumbnails screen. See Viewing Photos on page 15 and Viewing Selected Photos on page 16 for information on operating the frame in Photo mode. See Playing Music on page 16 for information on operating the frame in Audio mode. 2. Use the UP or DOWN button to highlight Slide music, then press the Viewing Photos RIGHT button to display the available options. The thumbnails screen shows a preview of all photos contained on the memory card. If a memory card is not installed, the thumbnails screen shows a preview of all photos in the 3. Use the UP or DOWN button to highlight the desired slide music option, frame s memory. then press the ENTER button to confirm your choice: Select On to enable audio playback when the Digital Picture Frame is in Slideshow display mode. Select Off to disable audio playback when the Digital Picture Frame is in Slideshow display mode. 4. Press the EXIT button twice to close the menu. When Slide music is enabled, your audio files will play back while the Digital Picture Frame is in Slideshow display mode. If you pause the Slideshow, audio playback is also paused. Calibrating the Touch Screen If you have problems using the touch screen, the Touch Panel Correction feature lets you calibrate the touch screen to ensure proper operation of your Digital Picture Frame. The Touch Panel Correction feature is available from all Setup Menus. 1. Press the SETUP button to display the Setup Menu. Use the LEFT, RIGHT, UP and DOWN buttons to scroll the screen backward and forward through the available photos. Touch the CARD button to toggle the thumbnails display between the memory card, the frame s internal memory, and any other currently installed memory devices. Touch a photo on the thumbnails screen to enter the Single Photo display mode, and display the currently selected photo. Use the LEFT and RIGHT buttons to scroll backward and forward through the available photos. Touch the SLIDESHOW button to enter the Slideshow display mode. The screen shows a slideshow of all available photos on the memory card. Touch the SPEED button to change the Slideshow transition speed. Each time you touch the button, the new speed shows briefly at the bottom of the screen. Touch the PAUSE button to pause the Slideshow. The currently selected photo is displayed. Press the PLAY button to resume the Slideshow. Touch the ROTATE button to change the orientation of the photo. In some cases, a photo may not appear properly oriented in the frame. The ROTATE button lets you rotate the currently displayed photo so it is properly oriented in the frame. The photo is rotated in 90-degree increments Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 15

20 Touch the EXIT button to return to the thumbnails screen. 2. Use the UP or DOWN button to highlight Photo mode, then press the RIGHT button to display the available display options. Viewing Selected Photos Normally, when viewing photos in Slideshow display mode, the Digital Picture Frame shows all photos on your memory card. If you wish, you can choose to display a Slideshow of selected photos only. 1. Access the thumbnails screen. 2. Use the LEFT, RIGHT, UP and DOWN buttons to highlight the first photo you wish to select. 3. Touch the SELECT button to select the photo. A checkmark displays in the upper right corner of the thumbnail. 3. Use the UP or DOWN button to highlight the desired display option, then press the ENTER button to confirm your choice: The Auto fit option displays your photos at in their original sizes. The Full option stretches your photos to fill the screen. Your photos may appear slightly distorted when using the Full option. The Pan scan option enlarges your photos to better fit the screen, and crops parts of the photo from the sides, or from the top and bottom, depending on the orientation of the frame and the size of the photo. 4. Press the EXIT button twice to close the menu. 4. To unselect a photo, use the LEFT, RIGHT, UP and DOWN buttons to highlight a selected photo, then press the SELECT button. Setting the Music Repeat Option The checkmark is removed. 5. Repeat steps 2 through 4 to select or unselect additional photos. When all the desired photos have been selected, touch a photo to return to the Single Photo display mode. When you view photos in Slideshow display mode, the Digital Picture Frame will show only the photos you have selected. Playing Music With the thumbnails screen displayed, press the MODE button to switch to the audio directory screen. The directory screen displays a list of all audio files on the currently selected memory device. The Music repeat feature lets you select the repeat option for your audio files. The Music repeat feature is not available when the Setup Menu is accessed from the thumbnails screen, or when the Digital Picture Frame is in Single Photo display mode. 1. Press the SETUP button to display the Setup Menu. 2. Use the UP or DOWN button to highlight Music repeat, then press the RIGHT button to display the available repeat options. 3. Use the UP or DOWN button to highlight the desired repeat option, then press the ENTER button to confirm your choice: None: Playback will cycle once through all available audio files, then stop. One: Playback will repeat the current file continuously. All: Playback will cycle through all available audio files, then repeat the cycle continuously. 4. Press the EXIT button twice to close the menu Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 25

21 When the Digital Picture Frame is placed in Slideshow display mode, photos will transition at the selected display interval. Setting the Photo Effect Normally, your photos are displayed in full color. The Photo Effect feature lets you stylize your photos by displaying them in sepia tones, or in black and white. The Photo Effect options only affect the way the photos are displayed on the Digital Picture Frame. The photos on your memory card are not changed. The Photo Effect feature is not available when the Setup Menu is accessed from an audio directory screen. 1. Press the SETUP button to display the Setup Menu. 2. Use the UP or DOWN button to highlight Photo Effect, then press the RIGHT button to display the available effect options. 3. Use the UP or DOWN button to highlight the desired effect option, then press the ENTER button to confirm your choice: The Color option displays your photos in full color. The Mono option displays your photos in black and white. The Sepia option displays your photos in sepia tones. 4. Press the EXIT button twice to close the menu. Adjusting the Image Display Depending on the original size of your photos, the photos may not completely fill the screen. The Photo mode feature lets you digitally stretch or crop your photos to better fit the screen. The Photo mode options only affect the way the photos are displayed on the Digital Picture Frame. The photos on your memory card are not changed. The Photo mode feature is not available when the Setup Menu is accessed from an audio directory screen. 1. Press the SETUP button to display the Setup Menu. If the message NO MUSIC is shown, press the CARD button to locate the memory device that contains your audio files. Use the UP and DOWN buttons to scroll the screen backward and forward through the available files. Touch the PLAY button to play the currently selected file. Touch the PAUSE button to pause the playback; touch the PLAY button again to resume the playback. Use the VOL + button to increase the playback volume; use the VOL - button to decrease the playback volume. Pres the STOP button to stop the playback. Pres the MODE button to return to the photo thumbnails display. The Digital Picture Frame will play back only the audio files you have selected. USING THE REMOTE CONTROL The Remote Control lets you use the advanced features and functions of the Digital Picture Frame, as well as providing access to the Setup menus. For basic operation of the frame, refer to USING THE FRAME CONTROLS. When your memory card is properly installed in the Digital Picture Frame, turn the POWER switch ON. The Digital Picture Frame enters the Slideshow mode. Press the EXIT button to display the thumbnails screen. The thumbnails screen shows a preview of all photos contained on the memory card. If a memory card is not installed, the thumbnails screen shows a preview of all photos in the frame s internal memory Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 17

22 Viewing Photos Use the LEFT, RIGHT, UP and DOWN buttons to scroll the screen backward and forward through the available photos. Press the CARD button to toggle the thumbnails display between the memory card, the frame s internal memory, and any other currently installed memory devices. Press the ENTER button to enter the Single Photo display mode, and display the currently selected photo. Press the ROTATE button to change the orientation of the photo. In some cases, a photo may not appear properly oriented in the frame. The ROTATE button lets you rotate the currently displayed photo so it is properly oriented in the frame. The photo is rotated in 90-degree increments. Selecting the Display Language The Language feature lets you select the display language for the menus, prompts, and other text information shown on the Digital Picture Frame. The available languages are English, French and Spanish. The Language feature is available from all Setup Menus. 1. Press the SETUP button to display the Setup Menu. 2. Use the UP or DOWN button to highlight Language, then press the RIGHT button to display the available display languages. A checkmark is shown next to the currently selected display language. 3. Use the UP or DOWN button to highlight the desired display language, then press the ENTER button to confirm your choice. Use the LEFT and RIGHT buttons to scroll backward and forward through The screen refreshes to display the menu in the selected language. the available photos. 4. Press the EXIT button twice to close the menu. When the frame is in Single Photo mode, the ENTER button is non-functional. You must use the Touch Screen to place the frame in Slideshow mode (see USING THE TOUCH SCREEN on page 14 for details). Setting Up the Slideshow When the frame is in Slideshow mode, press the ENTER button to pause the Slideshow. The Pause PAUSE ( ) icon shows briefly on the screen, and the currently selected photo is displayed. Press the ENTER button again to resume the Slideshow. The Play ( ) icon shows briefly on the screen, followed by a slideshow of all available photos on the memory card. Press the SPEED button to change the Slideshow transition speed. Each time you press the button, the new speed shows briefly at the bottom of the screen. Press the EXIT button to return to the thumbnails screen. The Slide speed feature lets you set the length of time each photo displays before transitioning to the next photo. The available intervals are Fast, Normal, and Slow. The Slide speed feature is not available when the Setup Menu is accessed from an audio directory screen, or when the frame is in Single Photo display mode. 1. Press the SETUP button to display the Setup Menu. 2. Use the UP or DOWN button to highlight Slide speed, then press the RIGHT button to display the available display intervals. 3. Use the UP or DOWN button to highlight the desired slide speed, then press the ENTER button to confirm your choice. 4. Press the EXIT button twice to close the menu Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 23

23 2. Use the UP or DOWN button to highlight Select card, then press the RIG HT button to display the available options. The options listed depend on the memory device(s) that are currently connected to the fra me. A checkmark is shown next to the currently selected source. 3. Use the UP or DOWN button to highlight the desired source for your photo and audio files, then press the ENTER button to confirm your choice. If the Select card feature was accessed from the Main Setup Menu, the menu closes and the thumbnails screen for the selected memory source displays. If the Select card feature was accessed from the Photo Setup Menu, the menu closes and the first photo on the selected memory source displays. If the Select card feature was accessed from the Audio Setup Menu, the menu closes and the audio directory for the selected memory source displays. Selecting the Operating Mode The Select mode feature lets you set the operating mode for the Digital Picture Frame to Photo or Music. The Select mode feature is available from all Setup Menus. 1. Press the SETUP button to display the Setup Menu. 2. Use the UP or DOWN button to highlight Select mode, then press the RIGHT butt on to display the available operating modes. A checkmark is shown next to the currently selected operating mode. 3. Use the UP or DOWN button to highlight the desired operating mode, then pre ss the ENTER button to confirm your choice. If Music is selected, the menu closes and the audio directory for the currently selected memory source displays. If Photo is selected, the menu closes and the thumbnails display for the currently selected memory source displays Inch Digital Picture Frame User s Guide Viewing Selected Photos Normally, when viewing photos in Slideshow display mode, or scrolling through photos in Single Photo display mode, the Digital Picture Frame shows all photos on your memory card. If you wish, you can choose to display selected photos only. 1. Access the desired thumbnails screen. 2. Use the LEFT, RIGHT, UP and DOWN buttons to highlight the first photo you wish to select. 3. Press the SELECT button to select the photo. A checkmark displays in the upper right corner of the thumbnail. 4. To unselect a photo, use the LEFT, RIGHT, UP and DOWN buttons to highlight a selected photo, then press the SELECT button. The checkmark is removed. 5. Repeat steps 2 through 4 to select or unselect additional photos. When all the desired photos have been selected, press the ENTER button to return to the Single Photo display mode. When you view photos in Slideshow display mode, the Digital Picture Frame will show only the photos you have selected. Playing Music With the thumbnails screen displayed, press the MODE button to switch to the audio directory screen. The directory screen displays a list of all audio files on the currently selected memory device. If the message NO MUSIC is shown, press the CARD button to locate the memory device that contains your audio files Inch Digital Picture Frame User s Guide 19

24 Use the UP and DOWN buttons to scroll the screen backward and forward through the available files. Press the ENTER button to play the currently selected file. Press the ENTER button to pause the playback; press again to resume the playback. Pres the EXIT button to stop the playback. Pres the MODE button to return to the photo thumbnails display. Playing Selected Songs Normally, when you play back audio files, the Digital Picture Frame plays all files one your memory card, in the listed order. If you wish, you can choose to play selected files only. 1. Access the desired audio directory. 2. Use the UP and DOWN buttons to highlight the first audio file you wish to select. 3. Press the SELECT button to select the file. A checkmark displays to the right of the file name. 4. To unselect a file, use the UP and DOWN buttons to highlight a selected file, then press the SELECT button. The checkmark is removed. 5. Repea t steps 2 through 4 to select or unselect additional files. When all the desired files have been selected, press the ENTER button to return to the playback mode. The Digital Picture Frame will play back only the audio files you have selected. SETUP MENU FUNCTIONS USING THE REMOTE CONTROL The Digital Picture Frame includes several features that let you customize the way the frame operates to suit your tastes. The setup menus can be accessed while viewing the thumbnails display or audio directory, or with the frame in Single Photo or Slideshow display mode. Some features are available from all Setup Menus. Other features are available through a specific Setup Menu only. The following paragraphs describe the steps to customize your Digital Picture Frame using the Remote Control. Optionally, you can use the touch screen to customize your Digital Picture Frame. See SETUP MENU FUNCTIONS USING THE TOUCH SCREEN on page 28 for details. Selecting the Display Source You can display photos and play back studio files from the Digital Picture Frame s internal memory, or from a memory device connected to the frame. The Select card feature lets you select the source for your photos and audio files. The Select card feature is available from all Setup Menus. 1. Press the SETUP button to display the Setup Menu Inch Digital Picture Frame User s Guide 10.4-Inch Digital Picture Frame User s Guide 21