KE2 Therm Evaporator Efficiency MODIFY STATUS. Mac Address: A Room Temp -8.5 F. Coil Temp 15.4 F. Compressor On. Dig Input 1 Closed

Transcription

1 Installation N.5. June 0 KE MasterView ABC Contracting (888) KE Therm Evaporator Efficiency IP Address: Location: Walk-in Freezer MODIFY STATUS Mac Address: A System Mode Cool Room Temp -8.5 F Coil Temp 5.4 F Compressor On Evaporator Fan All Clear Defrost Dig Input Closed Dig Input Dig Input Aux Temp Superheat 0.0 F Home Suct Pressure 96. F Settings Suct Temp 87.7 F Network Sat Temp 46.0 F Setpoints Valve Position Manual KE Therm Solutions, Advanced Energy Saving Technology for Commercial Refrigeration and AC Systems

2 Installation N.5. June 0 Page KE MasterView Introduction KE Master View is an ideal companion for the KE Evaporator Efficiency controllers. Out of the box, you have the ability to view system information and change set points of the KE Evaporator Efficiency controller remotely using a networked computer, laptop or smart mobile device -- such as the KE Master View. Using a graphical touch screen, the KE Master View can function as a stationary remote display that can be left on site, or used as a mobile service tool, for easy access to information. Master View instantly shows multiple system variables, providing and indepth understanding of system performance. Quickly review readings from the networked controllers, including the display of all system alarms, setpoints, and system data. And, Master View provides the ability to modify system settings for all of the networked controllers. Table of Contents Install and setup KE Router Page Verify KE Therm controller is connected to your LAN Page 4 How to setup KE Master View for your environment Page 6 Network Page 8 How to add more than four controllers to your LAN Page 9 Viewing system performance graphs Page 0 Appendix A: Verifying Master View is connected to a wireless network Page Copyright 0 KE Therm Solutions, Inc., Washington, Missouri 6090

3 ABC Contracting (888) System Mode Room Temp Cool -8.5 F KE Therm Evaporator Efficiency IP Address: Location: Walk-in Freezer MODIFY STATUS Mac Address: A Coil Temp Compressor Evaporator Fan 5.4 F On Defrost Dig Input Dig Input Dig Input Aux Temp Closed Superheat Suct Pressure Suct Temp 0.0 F 96. F 87.7 F Home Settings Network Setpoints ( (( Sat Temp Valve Position 46.0 F Manual All Clear Installation N.5. June 0 Page KE MasterView Install and setup KE Router The KE Therm router is a combination switch and router and is generally recommended instead of a standalone switch. It has 4 ports available and can be expanded to work in large commercial environments. This router will come pre-configured for wireless access. If modifications are required please refer to KE Router form Q.5.4 Quick Start. Attach the three wireless antennas to the KE Router as shown at right. POWER USB WAN 4 Internet Access KE EvaporatorEfficiency Connect one end of the Ethernet cable into one of the available RJ-45 connectors on the back of the KE Router Connect the other end of the cable to the Ethernet dongle on the Master View. Connect a CAT-5E network cable from the KE Master View to an available yellow Ethernet port on the KE Router Plug the power cable into the KE Router and the other end into an electrical outlet. FRONT 5 Power ON your computer. 6 Four green LEDs should be showing PWR (power),wlan, KE Evaporator Efficiency connected, KE Master View/computer connected. 6 PWR SYS WLAN 4 WAN USB QSS (( ( Copyright 0 KE Therm Solutions, Washington, Missouri 6090

4 Installation N.5. June 0 Page 4 KE MasterView Verify KE Therm controller is connected to your LAN. ON button Turn ON your KE Master View handheld device by pressing the power button until the screen illuminates. MODIFY STATUS The Master View will take a few moments to boot. System Mode Cool Room Temp -8.5 F Coil Temp 5.4 F Compressor On All Clear Defrost Dig Input Closed Dig Input Dig Input Aux Temp Superheat 0.0 F Suct Pressure 96. F Suct Temp 87.7 F Sat Temp 46.0 F Valve Position Manual Using a stylus or your fingernail, unlock the display by dragging the lock icon up. Before proceeding, make sure your Master View is connected to the LAN. See Appendix A for assistance. 0:0 stylus Open the web browser by tapping on the image of the globe 0:0 g Google Copyright 0 KE Therm Solutions, Inc., Washington, Missouri 6090

5 Installation N.5. June 0 Page 5 KE MasterView 4 Tap the white area of the screen and drag down until the address bar appears. Web Images 0:0 Tap the address field and the keyboard will appear. 4 Location unavailable - update Sign in igoogle Settings Help View Gogle in: Mobile l Classic Google.com in English 5 Enter the IP address for the controller (i.e., ) into the Address Field. The factory provided IP Address can be found on the back side of the controller on the white label. 6 Tap GO q w e a s d z x?, r t y u i o f g h j k l c v b n m. [ x Go 0:0 p Go 6 7 You should see the Master View screen at this time. 7 ABC Contracting (888) KE Therm Evaporator Efficiency IP Address: Location: Walk-in Freezer MODIFY STATUS Mac Address: A System Mode Cool Room Temp -8.5 F Coil Temp 5.4 F Compressor On Evaporator Fan All Clear Defrost Dig Input Closed Dig Input Dig Input Aux Temp Superheat 0.0 F Home Suct Pressure 96. F Settings Suct Temp 87.7 F Network Sat Temp 46.0 F Setpoints Valve Position Manual Copyright 0 KE Therm Solutions, Inc., Washington, Missouri 6090

6 Installation N.5. June 0 Page 6 KE MasterView How to setup Master View for your environment ABC Contracting (888) KE Therm Evaporator Efficiency IP Address: Location: Walk-in Freezer MODIFY STATUS Mac Address: A Click on SETTINGS. System Mode Cool Room Temp -8.5 F Coil Temp 5.4 F Compressor On Evaporator Fan All Clear Defrost Dig Input Closed Dig Input Dig Input Aux Temp Superheat 0.0 F Home Suct Pressure 96. F Settings Suct Temp 87.7 F Network Sat Temp 46.0 F Setpoints Valve Position Manual Enter your password and click on SUBMIT. User Password: Installer Password: If you will be using Master View to send alert s over the internet you will have to input the correct Server, User Name, Password, Address* and Subject. You can also input Your Business Name, Phone Number and Location of this device. 4 If no alerts are to be sent via then no entry is required. Once complete click on SAVE. * Instructions for setting up an account can be found in Q.5. 4 Copyright 0 KE Therm Solutions, Inc., Washington, Missouri 6090

7 Installation N.5. June 0 Page 7 KE MasterView 5 Verify these settings were saved by closing your browser and re-open to this IP Address. To test is operational, click on SETTINGS and click on the SUBMIT button. Login to your account and verify message was received from the controller. 5 Copyright 0 KE Therm Solutions, Washington, Missouri 6090

8 Installation N.5. June 0 Page 8 KE MasterView Network Click on NETWORK Click on CLEAR PAGE This will populate the screen with only the information from the contoller whose IP address is in the address bar. You can now change the Board Name to something that would make sense to you. i.e., Evaporator. Copyright 0 KE Therm Solutions, Inc., Washington, Missouri 6090

9 KE EvaporatorEfficiency KE EvaporatorEfficiency KE EvaporatorEfficiency KE EvaporatorEfficiency KE EvaporatorEfficiency KE EvaporatorEfficiency KE EvaporatorEfficiency KE EvaporatorEfficiency KE EvaporatorEfficiency Installation N.5. June 0 Page 9 KE MasterView How to add more than four controllers to your LAN Four or fewer controllers using a KE Router Make sure the KE Router and Switch are powered ON. Connect as shown at right. More than four controllers using a KE Router and KE Switch Link/ACT Green (solid): link to another device Green (blinking): activity occurring from link Not lit: nothing is detected on the port Power Green: power ON Not lit: power OFF POWER Link/ACT 00/000Mbps 00/000 Mbps Green: connection for the port is 000 (full/half) Amber: connection for the port is 00 (full/half) Not lit: connection for the port is 0 (full/half) OR nothing is detected on the port. Copyright 0 KE Therm Solutions, Inc., Washington, Missouri 6090

10 Installation N.5. June 0 Page 0 KE MasterView Verifying the second KE Therm Controller is connected to your LAN. Open your Web Browser and type the IP address of the first controller you installed into the address field and hit. ABC Contracting (888) System Mode Cool Room Temp -8.5 F KE Therm Evaporator Efficiency IP Address: Location: Walk-in Freezer MODIFY STATUS Mac Address: A Coil Temp 5.4 F Compressor On Evaporator Fan All Clear You should see the Master View screen at this time. Defrost Dig Input Closed Dig Input Dig Input Aux Temp Click on NETWORK. Superheat 0.0 F Home Suct Pressure 96. F Settings Suct Temp 87.7 F Network Sat Temp 46.0 F Setpoints Valve Position Manual Click on DISCOVER. 7 Change Board Name to something that makes sense in your environment. i.e., Evaporator. Important: Make sure the IP Address is the same as listed on the second controller. 4 Click on BOND. 4 Viewing system performance graphs Clicking on GRAPHS from the home page will show you an overlapping 5-day log of Room Temperature and Coil Temperature. When a defrost cycle occurs you will notice the spike in Room Temperature and Coil Temperature. Copyright 0 KE Therm Solutions, Inc., Washington, Missouri 6090

11 Installation N.5. June 0 Page KE MasterView Appendix A: Verifying Master View is connected to a Wireless Network Using a stylus or your fingernail, unlock the display by dragging the lock icon up. 0:0 stylus You will then see the Homepage. Select the Menu icon. 0:0 g Google 4 from the Menu, select the SETTINGS icon. 0:0 Adobe Reader ASTRO Browser Calculator Calendar Contacts Dev Tools Gallery Gmail Maps Market Music Navigation Search Settings Spare Parts talk SwiFTP Copyright 0 KE Therm Solutions, Washington, Missouri 6090 Talk Touch Calibration Wits BatchInstaller 4

12 Installation N.5. June 0 Page KE MasterView 5 Click on WIRELESS & NETWORKS Wireless & networks Ethernet configuration Sound play Location & security Applications Accounts & sync 5 0:0 6 Clicking on WIRELESS & NETWORKS shows you the available networks. 6 Wi-Fi Connected to KE Router Wi-Fi settings Set up & manage wireless access points Bluetooth Turn on Bluetooth Bluetooth settings Manage connections, set device name & discover ability VPN settings Set up & manage Virtual Private Networks (VPNs) G Data Card settings config G Data card and network state 0:0 7 Verify the KE Router is connected to the Master View. This is displayed under the Wi-Fi. The Network is pre-configured to connect the KE Router and Master View out of the box. Wi-Fi Connected to KE Router Network notification Notify me when an open network is available Wi-Fi networks KERouter Remembered 7 KE-Guest KETherm Secured with WPA/WPA PSK dd-wrt 0:0 Copyright 0 KE Therm Solutions, Washington, Missouri 6090 Bulletin N.5. June 0 supersedes Bulletin N.. April 0 and all prior publications. pn 046 KE Therm Solutions, Inc. 09 Lange Drive. Washington, MO