Alteon version 29.5 Recommended OID For SNMP Monitoring

Size: px

Start display at page:

Download "Alteon version 29.5 Recommended OID For SNMP Monitoring"

Crystal Norman
6 years ago
Views:

1 Alteon version 29.5 Recommended OID For SNMP Monitoring Radware Knowledgebase August 2014

2 TABLE OF CONTENTS 1 GENERAL MP CPU UTILIZATION SP CPU UTILIZATION MP MEMORY UTILIZATION SP MEMORY UTILIZATION INTERFACE UTILIZATION (BPS AND PPS) VIRTUAL SERVER UTILIZATION REAL SERVER UTILIZATION (CONNECTIONS AND BPS) GROUPS STATISTICS FILTER UTILIZATION THROUGHPUT USAGE SESSION TABLE UTILIZATION AUXILIARY SESSION TABLE ALTEON DEVICE HARDWARE STATUS DEVICE SOFTWARE STATUS Page 2

3 1 General This document purpose is to provide Alteon customers a list of recommended SNMP OIDs to monitor in Alteon. This document is based on Alteon version 29.5 MIBs file. The document is based on Radware s knowledge and experience in various deployment projects. Notes It is recommended by Radware that customers will adjust their monitoring policy to their already existing IT policy in regards to what counters to monitor, how often to measure them and what is considered a threshold to watch. All Alteon form factors (Stand Alone, VA, VX) are using the same OIDs. 2 MP CPU Utilization MP CPU utilization over mpcpustatsutil1second sec (/stats/mp/cpu) MP CPU utilization over mpcpustatsutil4seconds sec MP CPU utilization over 64 sec mpcpustatsutil64seconds SP CPU Utilization The utilization of this SP spstatscpuutil1second over 1 second. SP CPU utilization over 4 spstatscpuutil4seconds sec SP CPU utilization over spstatscpuutil64seconds sec Current number of session on the SP slbstatspmaincurbindings Page 3

4 4 second average slbstatspmaincurbindings4seconds current number of sessions on the SP 64 second average current number of sessions on the SP slbstatspmaincurbindings64seconds MP Memory Utilization MP System Memory stats MpMemStatsTotal total (/stats/mp/mem) System MP Memory stats free MpMemStatsFree SP Memory Utilization The current memory of SpMemUsageStatsCurrentMemory SP. 6 Interface Utilization (bps and pps) The total number of portstatsphyifinoctet octets received on the interface, including framing characters. The total number of portstatsphyifoutoctet octets transmitted out of the interface, including framing characters Port input octets portstatsinoctetspersec Port output octets per portstatsoutoctetspersec seconds Amount of port input data portstatsinpktspersec in packets in the last sec Amount of port output data in packets in the last sec portstatsoutpktspersec Page 4

5 7 Virtual Server utilization The number of sessions that are currently handled by the virtual server. * The total number of sessions that are handled by the virtual server. * The highest sessions that have been handled by the virtual server.* The lower 32 bit value of octets received and transmitted out of the virtual server.* The total number of octets received and transmitted out of the virtual server * The higher 32 bit value of octets received and transmitted out of the virtual server. * The current HTTP total sessions * The total octets received and transmitted by the virtual server. * The number of sessions that are currently handled by the virtual server. ** The total number of sessions that are handled by the virtual server. ** The highest sessions that have been handled by the virtual server. ** slbstatenhvservercurrsessions slbstatenhvservertotalsessions slbstatenhvserverhighestsessions slbstatenhvserverhcoctetslow slbstatenhvserverhcoctetslow slbstatenhvserverhcoctetshigh slbstatenhvserverheadertotalsessi ons slbstatenhvserverhcoctets slbstatvservercurrsessions slbstatvservertotalsessions slbstatvserverhighestsessions The lower 32 bit value slbstatvserverhcoctetslow Page 5

6 of octets received and transmitted out of the virtual server. ** The total number of slbstatvserverhcoctetslow octets received and transmitted out of the virtual server ** The higher 32 bit value of octets received and transmitted out of the virtual server. ** slbstatvserverhcoctetshigh The current HTTP total slbstatvserverheadertotalsessions sessions ** The total octets received and transmitted by the virtual server. ** slbstatvserverhcoctets *This OID will be used once the device is set to By Name mode (support alphanumeric indexes). Note that By Name is the default mode. ** This OID will be used once the device is set to By Number mode (support numeric) indexes) Note: To change the default mode which is By name to By Number type the command cfg/sys/idbynumen. To change back to default type the command: cfg/sys/idbynum dis 8 Real server utilization (connections and bps) Real-Server current slbstatenhrservercurrsessions sessions * Real-Server total slbstatenhrservertotalsessions sessions * The total number of slbstatenhrserverfailures times that the real server is claimed down.* The highest sessions slbstatenhrserverhighestsessions that have been handled by the real server.* The total number of slbstatenhrserverhcoctets octets received and transmitted out of the real server * The total number of octets received and transmitted out of the real server * slbstatenhrserverhcoctetslow Page 6

7 Real-Server total rx/tx slbstatenhrserverhcoctets octets * Real-Server current slbstatrservercurrsessions sessions ** Real-Server total slbstatrservertotalsessions sessions ** The total number of slbstatrserverfailures times that the real server is claimed down.** The highest sessions slbstatrserverhighestsessions that have been handled by the real server.** The total number of slbstatrserverhcoctets octets received and transmitted out of the real server ** The total number of slbstatrserverhcoctetslow octets received and transmitted out of the real server ** Real-Server total rx/tx slbstatrserverhcoctets octets ** The Maximum allowed number of concurrent connections per real server in the configuration slbcurcfgrealservermaxconns [ Real_Server_ID] *This OID will be used once the device is set to By Name mode (support alphanumeric indexes). Note that By Name is the default mode. ** This OID will be used once the device is set to By Number mode (support numeric) indexes) Note: To change the default mode which is By name to By Number type the command cfg/sys/idbynumen. To change back to default type the command: cfg/sys/idbynum dis. 9 Groups Statistics The current memory of SpMemUsageStatsCurrentMemory SP in kilo bytes. The number of sessions that are currently slbstatenhgroupcurrsessions [Group_ID] handled by the real server group * The total number of slbstatenhgrouptotalsessions Page 7

8 sessions that are handled by the real server group.* The highest sessions that have been handled by the real server group.* The number of sessions that are currently handled by the real server group ** The total number of sessions that are handled by the real server group.** The highest sessions that have been handled by the real server group.** slbstatenhgrouphighestsessions [Group_ID] slbstatenhgrouphighestsessions [Group_ID] slbstatgroupcurrsessions [Group_ID] slbstatgrouptotalsessions [Group_ID] slbstatgrouphighestsessions [Group_ID] *This OID will be used once the device is set to By Name mode (support alphanumeric indexes). Note that By Name is the default mode. ** This OID will be used once the device is set to By Number mode (support numeric) indexes) Note: To change the default mode which is By name to By Number type the command cfg/sys/idbynumen. To change back to default type the command: cfg/sys/idbynum dis 10 Filter Utilization The number of instances that the received packet matches the filter rule FltStatFltFirings [filter_nember] 11 Throughput Usage Peak throughput of PeakThroughputUsage ports in bits per second. Current Throughput curthroughputusage Usage Peak SSL capacity PeakSslCapUsage usage in CPS Current SSL capacity CurSslCapUsage Page 8

9 usage in CPS. Peak compression PeakComprsnCapUsage capacity usage in Mbps. Current compression CurComprsnCapUsage capacity usage in Mbps Peak APM capacity PeakApmCapUsage usage in PgPM Current APM capacity usage in PgPM. curapmcapusage Session Table Utilization The maximum number slbstatmaintmaximumsessio entries in the session table ns The number of sessions slbstatmaintip6currsessions for ipv6. The Current Number of session in the session table in the last 4 seconds The Current Number of session in the session table in the last 64 seconds The Current Number of session in the session table Current number of entries for SLB sessions in device. slbstatmaintcurbindings4sec onds.0; Name/OID: slbstatmaintcurbindings64se conds.0; Value (Gauge): slbstatspmaintcurbindings switchcapslbsessionscurre nt Auxiliary Session Table The number of slbstatspauxsesscurconn connections in this auxiliary sessions table. The maximum number of connections handled by slbstatspauxsessmaxconn Page 9

10 this auxiliary session table. The total number of allocation failures for this auxiliary session table. slbstatspauxsessallocfails Alteon Current pblade pbladeinfooperatstate operational status Current pblade pbladeinfocfgstate processing status Pblade average SP Load pbladeinfoavgspload Pblade MP load pbladeinfompload Device Hardware Status The status of the hwtemperaturestatus temperature sensor. The temperature sensor hwtemperaturesensor The temperature sensor hwtemperaturesensor Get the temperature hwtemperaturewarningthresho warning threshold ldget Get the temperature hwtemperatureshutdownthresh shutdown threshold oldget Get the threshold status of CPU1 warning - if the warning threshold exceeded critical - if the shutdown threshold exceeded hwtemperaturethresholdstatus CPU1Get Get the threshold status of CPU2 hwtemperaturethresholdstatus CPU2Get Page 10

11 warning - if the warning threshold exceeded critical - if the shutdown threshold exceeded hwfanstatus hwfanstatus Alteon device MAC hwmacaddress address The switch serial number. hwserialnumber Defines the HW version of hwversion the product. DRAM Size hwdramsize Flash Size hwflashsize The number of hard hwnumberofhd drives. The status of the power hwpowersupplystatus supply The request Id of the request which caused the last error. (/info/sys/ps) agsnmperrorrequestid Device Software Status Time since the switch is agswitchuptime up in DisplayString, sysuptime also provides the same data in TimeTicks. The value of sysuptime agswitchconfigchangetime at the last configuration change. Last configuration change agswitchconfigchangetime times same as agswitchconfigchangeti me but in user readable format. Str The image name which is agactiveimagename active right now Company Name Details. liccompanyname Page 11

12 Switch Location Details. licswitchlocation Contact Details. liccontact Page 12

Alteon version 30.2 Recommended OID For SNMP Monitoring. Radware Knowledgebase

Alteon version 30.2 Recommended OID For SNMP Monitoring Radware Knowledgebase TABLE OF CONTENTS 1 GENERAL... 3 2 MP CPU UTILIZATION... 3 3 SP CPU UTILIZATION... 3 4 SYSTEM MEMORY UTILIZATION... 3 5 INTERFACE