PC Enclosure Instruction

Transcription

1

2 PC Enclosure Instruction Congratulations on your purchase one of the PC Enclosure. This is a high-tech product that can provide multipurpose function for future home and enterprise usage. t the same time, this enclosure is well design for total thermal solution. Moreover, we use different materials to provide a variety of attractive body design for our customer to choose. Enjoy and have fun with our product for the pride that we are searching for. If you should run into any problem with this product, please visit our website at to get up to date and important product information from This instruction will help you to make the most detail of your PC enclosure. Please read through it before installation. lso, please keep your PC enclosure receipt and this instruction in safe place for the future need and reference. The Lascala series use streamlined modern body design with life-like aluminum alloy material. It will bring out the style of your home as well as the sophisticated taste of your office. From simple PC to complex DVR, the multi-function capability provides a world of fantasy for your imagination. Portable size, lightweight design and easy to upgrade are the theme behind this series. Over all, the performance of this enclosure not only increases PC usability, but also its value from high quality craftsmanship.

3 Detail of Parts ag : Parts Item and Function: 1. Copper Stand-off (C) : 15 pcs. First, arrange and fasten the Stand-off on the bottom plate. which is corresponding to the hole position on mother board. Second, put the mother board on the top of those Copper Stand-off and fix with screws P/W 3*6-Ni. WRNING: To avoid the damage, please make sure the Stand-off is on the right position which matching the hole on the mother board 2. Screw P/W 3*6-Ni () : 23 pcs. To fix the CD-ROM, FDD, Main board ( using together with Copper Stand-off ). 3. Screw H/W #6-32*6-Ni () :16 pcs. To fix the Power Supply Unit, Hard Disk Drive. P

4 Product Overview SST-LC01 Specification: Material: ll luminum lloy M/ Type: Standard TX/micro TX Mother oard Color: Silver, lack Drive ay: 5.25" x 2 ( Exposed ) / 3.5" x 2 ( Exposed ) / 3.5" x 4 (hidden) Cooling: 80 x 80 x 25 mm fan attached back panel ( Exhaust ) Expansion: Slot x 7 pcs Others: Dual standard US ports IEEE1394 Firewire. Weight: Case kg Dimension: 450 mm ( D ) x 425 mm ( W ) x 159 mm ( H ) Included: Enclosure Instruction x 1 : M3 Screw x 23 pcs : #6-32 Screw x 16 pcs C: Stand-off x 15 pcs

5

6 Please unscrew the 4 screws from the back panel. Slide the cover backward slowly and lift it up to remove it.

7 C Please place the PSU ( standad TX ) at the rear-left position and tighten up at the power supply frame with #6-32 ( ) screws. 2.To install the mother board, make sure the holes position are right above the stand-off. Fasten the screws gently through the holes into the stand-off ( C ).

8 4.To install the HDD, FDD, or CD-ROM on the front panel. Please unfasten the 3 screws of the left metal bracket and remove it first. Then, slide the metal bracket backward slowly and pull it out For any installation on the right side of the metal bracket: If it is the CD-ROM or FDD, insert it at the top and in-front of the metal bracket. Then, fasten the 4 screws ( 2 on each side ) at the side of the metal bracket. If it is the HDD, insert it at the lower back of the metal bracket. Then, fasten the 4 screws ( 2 on each side ) at the side of the metal bracket. For any installation on the left side of the metal bracket, install it before slide back into the case: If it is the CD-ROM or FDD, insert it at the top and in-front of the metal bracket. Then, fasten the 4 screws ( 2 on each side ) at the side of the metal bracket. If it is the HDD, insert it at the lower back of the metal bracket. Then, fasten the 4 screws (2 on each side ) at the side of the metal bracket.

9 5.fter all the installation are finished, please put the cover back gently on the case frame. Then, slide it forward slowly until touching the front panel. nd, fasten 4 screws at the back panel.

10 1 and

11

12 ug N0: