6BA USER'S MANUAL. For Intel Pentium II / III / Celeron Processor MAINBOARD REV. 3.0 First Edition R
|
|
|
- Tabitha Watson
- 5 years ago
- Views:
Transcription
1 USER'S MANUAL. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System power on by Keyboard: If your ATX power supply supports larger than 300 ma 5V Stand-By current, you can power on your system by entering password from the Keyboard after setting the Keyboard power on jumper (JP) and password in CMOS Setup. 3. Support Modem Ring-On. (Include internal Modem and external modem on COM A and COM B). Wake-up on LAN supports(on J): Your ATX power supply must support larger than 720 ma 5V Stand-By current. 5. Support 3 steps ACPI LED. 6. Support LDCM For Intel Pentium II / III / Celeron Processor MAINBOARD REV. 3.0 First Edition R
2
3 The author assumes no responsibility for any errors or omissions which may appear in this document nor does it make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners. Sound Blaster is a registered trademark of Creative Technology Ltd in the United States and certain other countries. Sound Blaster-LINK and SB-LINK are trademarks of Creative Technology Ltd. May 26, 999 Taipei, Taiwan
4 Quick Installation Guide I. Quick Installation Guide : CPU SPEED SETUP The system bus speed can be selectable between 66.6MHz and 00MHz. The user can select the system bus speed (JP8) and change the DIP SWITCH selection to set up the CPU speed for MHz processor. The CPU speed must match with the frequency RATIO. It will cause system hanging up if the frequency RATIO is higher than CPU's. FREQ. RATIO DIP SWITCH 2 3 X 3 ON OFF ON ON X 3.5 OFF OFF ON ON X ON ON OFF ON X.5 OFF ON OFF ON X 5 ON OFF OFF ON X 5.5 OFF OFF OFF ON X 6 ON ON ON OFF X 6.5 OFF ON ON OFF X 7 ON OFF ON OFF X 7.5 OFF OFF ON OFF X 8 ON ON OFF OFF X 8.5 OFF ON OFF OFF X 9 ON OFF OFF OFF X 9.5 OFF OFF OFF OFF 2
5 JP8 (Select the system speed between 66.6MHz and 00MHz) -2 Close Set system speed to 66MHz - system 3 2 always run at 66MHz FSB (Front Side Bus). 2-3 Close Set system speed to Auto - system 3 2 speed detect automatically (66/ 00MHz FSB) Open Set system speed to 00MHz - system 3 2 always run at 00MHz FSB (Front Side Bus). There are two ways to set system speed A. 66MHz forced (JP8-2 short) or Auto detect (2-3 short) B. 00MHz forced (JP8-2-3 open) or Auto detect (2-3 short) The black part in the picture is the white extruding piece of the DIP switch.. Pentium II / Celeron 233 / 66 MHz FSB ON OFF SW 3 2 JP8 JP8 3 2 PIIX LX 823BX 3
6 Quick Installation Guide 2. Pentium II / Celeron 266 / 66 MHz FSB SW ON 32 OFF JP Pentium II / Celeron 300MHz / Celeron 300A MHz/66MHz FSB SW ON 32 OFF JP Pentium II / Celeron 333 / 66 MHz FSB SW ON 32 OFF JP Pentium II / Celeron 366 / 66 MHz FSB SW 32 ON 6. Pentium II / Celeron 00 MHz / 66MHz FSB OFF JP8 3 2 SW ON 32 OFF JP8 3 2
7 7. Pentium II / Celeron 33 MHz / 66MHz FSB SW ON 32 OFF JP Pentium II 350 / 00 MHz FSB SW ON 32 OFF JP Pentium II 00 / 00 MHz FSB SW ON 32 OFF JP Pentium III 50 / 00 MHz FSB SW ON 32 OFF JP Pentium III 500 / 00 MHz FSB SW ON 32 OFF JP
8 Quick Installation Guide 2. Pentium III 550MHz / 00MHz FSB SW 32 JP8 ON 3. Pentium III 600MHz / 00MHz FSB OFF 3 2 SW 32 JP8 ON. Pentium III 650MHz / 00MHz FSB OFF 3 2 SW ON 32 OFF JP
9 II. Jumper setting : IR : Infrared Connector (Optional) + Pin Function IR Data Output 2 GND 3 IR Data Input NC 5 POWER (+) PIIX 823LX 823BX PWR : Power LED / Key-Lock Connector Pin Function LED anode (+) 2 LED cathode ( ) 3 LED cathode ( ) Key Lock 5 GND PIIX 823LX 823BX 7
10 Quick Installation Guide SPK : Speaker Connector Pin Function VCC 2 NC 3 NC Data PIIX 823LX 823BX TD : Turbo LED Connector Pin Function LED anode (+) 2 LED cathode ( ) PIIX 823LX 823BX 8
11 TB : Turbo Switch Connector PIIX Function Reserved 823LX 823BX RST : Reset Switch Open : Normal operation PIIX Close : Reset system 823LX 823BX 9
12 Quick Installation Guide GD : Green Function LED Pin Function LED anode (+) 2 LED cathode ( ) PIIX 823LX 823BX GN : Green Function Switch Open : Normal operation PIIX Close: Entering Green Mode 823LX 823BX 0
13 HD : IDE Hard Disk Active LED Pin Function LED anode (+) 2 LED cathode ( ) PIIX 823LX 823BX Soft PWR : Soft Power Connector Pin Function GND 2 CTRL-Signal PIIX 823LX 823BX
14 Quick Installation Guide POWER : P8&P9 Power Connector Pin Function Power Good 2,0,,2 VCC 3 +2V -2V 5,6,7,8 GND 9-5V PIIX 823LX 823BX ATX POWER : ATX POWER Connector Pin Function 3,5,7,3, GND 5-7 PIIX,2, 3.3V,6,9,20 VCC (+5V) 0 +2V 2 2V 8 5V 8 Power Good 9 5V SB (Stand by +5V) PS-ON (Soft 823LX 823BX ON/OFF) 2
15 CPU FAN : CPU Cooling Fan Power Connector Pin Function GND 2 +2V 3 Signal PIIX 823LX 823BX SYSTEM FAN : SYSTEM Fan Power Connector PIIX Pin Function GND 2 +2V 3 Signal 823LX 823BX 3
16 Quick Installation Guide POWER FAN : POWER Fan Connector PIIX Pin Function GND 2 +2V 3 Signal 823LX 823BX IDE: Primary IDE port PIIX RED LINE 823LX 823BX
17 IDE2: Secondary IDE port PIIX RED LINE 823LX 823BX FLOPPY : FLOPPY PORT PIIX 823LX 823BX RED LINE 5
18 Quick Installation Guide LPT : LPT PORT RED LINE PIIX 823LX 823BX COMB : COM B PORT PIIX RED LINE 823LX 823BX 6
19 COMA : COM A PORT PIIX 823LX 823BX RED LINE JP : Keyboard Power On (for ATX Power Supply only) -2 Close : Enable Keyboard Power On PIIX 2-3 Close : Disable Keyboard Power On 823LX 823BX 7
20 Quick Installation Guide K.B : Keyboard Connector PIIX Pin Function Key Clock 2 Key Data 3 NC GND 5 VCC (+5V) 823LX 823BX J : PS/2 MOUSE PIIX RED LINE 823LX 823BX 8
21 USB : USB Port Pin Function VCC 2 USB D0 3 USB D0+ GND 5 VCC 6 USB D 7 USB D+ 8 GND PIIX 823LX 823BX J : Wake on Lan (for ATX Power Supply only) PIIX Pin Function +5V SB 2 GND 3 Signal 823LX 823BX 9
22 Quick Installation Guide JP9 : CLEAR CMOS PIIX -2 Short :Clear CMOS 2-3 Short : Normal 823LX 823BX JP0 : CASE OPEN (Optional) PIIX Pin Function Signal 2 GND 823LX 823BX 20
23 J9 : Internal Modem Card Ring PWR On PIIX Pin Function Signal 2 GND 823LX 823BX SB-LINK : For PCI Audio / Sound Card use only (Creative PCI Sound Card Support) 5 PIIX 6 2 Pin Function Signal 2 GND 3 NC Signal 5 GND 6 Signal 823LX 823BX 2
24 Quick Installation Guide JP & JP2 (This function is support in PCB version 3.0 and above) PIIX JP JP2 Open :Normal (Default) JP JP2 Close :For Voodoo3 VGA card 823LX 823BX BAT : For Battery + Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer s instructions. PIIX BAT 823LX 823BX 22
25 III. Top Performance Test Setting: The following performance data list is the testing results of some popular benchmark testing programs. Users have to modify the value for each item in chipset features as follow for top performance setting. 23
26 Quick Installation Guide These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.) CPU DRAM CACHE SIZE DISPLAY STORAGE Pentium II processor (32x)MB SDRAM (LGS GM72V666CT7J) 52 KB included in CPU GA-60 AGP Display Card (MB SGRAM) Onboard IDE (Seagate ST36530A) O.S. Windows NT.0 DRIVER Display Driver at 02 x 768 x 6k colors x 75Hz. TRIONES Bus Master IDE Driver 3.70 Processor Intel Pentium II 350MHz(00x3.5) 00MHz(00x) Winbench98 CPU mark FPU Winmark Business Disk Hi-End Disk Business Graphics Hi-End Graphics 28 2 Winstone98 Business Hi-End
6SMM7 USER'S MANUAL. Celeron TM Socket 370 Processor MAINBOARD REV. 1.1 First Edition R
USER'S MANUAL. System power on by Keyboard: If your ATX power supply supports larger than 00 ma 5V Stand-By current (dependent on the specification of keyboards), you can power on your system by entering
6BMM USER'S MANUAL. 3. Support Modem Ring-On. (Include internal Modem and external modem on COM A and COM B)
USER'S MANUAL. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System power
5AMMC USER'S MANUAL. Support Intel Pentium, MMX, Cyrix/IBM 6x86MX, MII, AMD K5, K6, K6-2 & IDT C6 CPUs. Support auto detect CPU Voltage.
5AMMC USER'S MANUAL Support Intel Pentium, MMX, Cyrix/IBM 6x86MX, MII, AMD K5, K6, K6-2 & IDT C6 s. Support auto detect Voltage. Support Parity check or Ecc Function. Support Fully.0 Specification. Support
5AA USER'S MANUAL. than 720 ma 5V Stand-By current ). Support Intel Pentium, MMX, Cyrix/IBM 6x86MX, MII, AMD K6, K6-2, K6-III & IDT Winchip II CPUs.
AA USER'S MANUAL Support Intel Pentium, MMX, Cyrix/IBM xmx, MII, AMD K, K-, K-III & IDT Winchip II s. Support Parity check or Ecc Function. Support Fully AGP.0 Specification. Support itching mode Voltage
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6BA
6BA TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II / III Processor...1-4 1.6. What is AGP?...1-5
686BX USER'S MANUAL. 3. Supports 3 steps ACPI LED. 4. Modem Ring-On. (COM B) 5. Wake-Up on LAN. (on J13) 6. Supports LDCM
686BX USER'S MANUAL. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION. Table of Contents 1.1. PREFACE KEY FEATHERS...
Table of Contents TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE... 1-1 1.2. KEY FEATHERS... 1-1 1.3. PERFORMANCE LIST... 1-2 1.4. BLOCK DIAGRAM... 1-3 1.5. INTRODUCE THE PENTIUM II/ III PROCESSORS...
6BXC USER'S MANUAL. 3. Supports 3 steps ACPI LED. 4. Modem Ring-On. (COM A, B).
USER'S MANUAL. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System power
6VXE USER'S MANUAL. 3. Supports 3 steps ACPI LED. 4. Modem Ring-On. (COM A, B).
USER'S MANUAL. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System power
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6EM 1.1. PREFACE KEY FEATURES PERFORMANCE LIST...
6EM TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II Processor & AGP...1-4 1.6 What is AGP?...1-6
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6VX PREFACE KEY FEATHERS
6VX7 TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE... 1-1 1.2. KEY FEATHERS... 1-1 1.3. PERFORMANCE LIST... 1-2 1.4. BLOCK DIAGRAM... 1-3 1.5. INTRODUCE THE INTEL Celeron TM Socket 370 Processor... 1-4
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION. Table Of Contents 1.1. PREFACE KEY FEATURES...
Table Of Contents TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II Processor & AGP...1-4 1.6.
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6LX7 / 6LX7A 1.1. PREFACE KEY FEATHERS...
TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATHERS...1-1 1.3. PERFORMANCE LIST...1-3 1.4. BLOCK DIAGRAM...1-4 1.5. INTRODUCE THE INTEL Celeron TM Socket 370 Processor...1-5 1.6. WHAT
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6EX 1.1. PREFACE KEY FEATURES PERFORMANCE LIST...
6EX TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II Processor & AGP...1-4 1.6 What is AGP?...
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6BXDS 1.1. PREFACE KEY FEATURES...1-1
6BXDS 1. INTRODUCTION TABLE OF CONTENTS 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II Processor...1-4 1.6. What is AGP?...1-6
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6BMM 1.1. PREFACE KEY FEATURES...1-1
6BMM TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II Processor & AGP...1-4 1.6. What is AGP?...1-6
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION. Table of Contents 1.1. PREFACE KEY FEATURES...
Table of Contents 1. INTRODUCTION TABLE OF CONTENTS 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II Processor...1-4 1.6. What
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6VMA 1.1. PREFACE KEY FEATURES...1-1
6VMA TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II / III Processor...1-4 1.6. What is AGP?...1-5
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION. Table of Contents 1.1. PREFACE KEY FEATURES...
Table of Contents TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE INTEL Celeron TM Socket 370 Processor...1-4
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION. Table of Contents 1.1. PREFACE KEY FEATURES...
Table of Contents TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II/III Processor...1-4 1.6.
GA - 686LX USER'S MANUAL. Pentium II Processor MAINBOARD. REV. 1 First Edition
GA - 686LX USER'S MANUAL Pentium II Processor MAINBOARD REV. 1 First Edition GA-686LX The author assumes no responsibility for any errors or omissions which may appear in this document nor does it make
TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE KEY FEATURES PERFORMANCE LIST BLOCK DIAGRAM...
TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE... 1-1 1.2. KEY FEATURES... 1-1 1.3. PERFORMANCE LIST... 1-3 1.4. BLOCK DIAGRAM... 1-4 1.5. INTRODUCE THE PCI - BUS... 1-5 1.6. FEATURES... 1-5 2. SPECIFICATION
3.11. GREEN FUNCTION INSTALLATION PERIPHERAL DEVICE INSTALLATION BIOS CONFIGURATION 4.1. ENTERING SETUP...
3.11. GREEN FUNCTION INSTALLATION... 3-8 3.12. PERIPHERAL DEVICE INSTALLATION... 3-8 4. BIOS CONFIGURATION 4.1. ENTERING SETUP... 4-1 4.2. CONTROL KEYS... 4-2 4.3. GETTING HELP... 4-3 4.3.1. Main Menu...
TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE KEY FEATURES PERFORMANCE LIST BLOCK DIAGRAM...
Table of Contents TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE... 1-1 1.2. KEY FEATURES... 1-1 1.3. PERFORMANCE LIST... 1-3 1.4. BLOCK DIAGRAM... 1-4 1.5. INTRODUCE THE PCI - BUS... 1-5 1.6. FEATURES...
TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE KEY FEATURES PERFORMANCE LIST BLOCK DIAGRAM...
TABLE OF CONTENTS. INTRODUCTION.. PREFACE... -.2. KEY FEATURES... -.3. PERFORMANCE LIST... -3.4. BLOCK DIAGRAM... -4.5. INTRODUCE THE PCI - BUS... -5.6. FEATURES... -5.7. What is AGP... -6 2. SPECIFICATION
6BXE USER'S MANUAL. 3. Supports 3 steps ACPI LED. 4. Support Modem Ring-On. (Include internal Modem and external modem on COM A and COM B)
6BXE USER'S MANUAL 1. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE KEY FEATURES PERFORMANCE LIST BLOCK DIAGRAM...
Table of Contents TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE... 1-1 1.2. KEY FEATURES... 1-1 1.3. PERFORMANCE LIST... 1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE PCI - BUS... 1-4 1.6. FEATURES...
6BX USER'S MANUAL. 3. Supports 3 steps ACPI LED. 4. Modem Ring-On. (COM B)
6BX USER'S MANUAL 1. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
6VXE USER'S MANUAL. 3. Supports 3 steps ACPI LED. 4. Modem Ring-On. (COM A, B).
6VXE USER'S MANUAL 1. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
6BXC USER'S MANUAL. 5. Wake-Up on LAN. (on JP7) (The ATX power supply supports larger than 600 ma 5V Stand-By current) REV. 1.
USER'S MANUAL 1. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System power
6LMM7 USER'S MANUAL. 3. Support 3 steps ACPI LED selectable. 4. Support Modem Ring-On. (Include internal Modem and external modem on COM A and COM B)
6LMM7 USER'S MANUAL. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
Quick Start Guide. SY-6BB V1.0 Mainboard F C. Introduction. Installation. Hardware. Quick BIOS Setup. The SOYO CD
SY-6BB V.0 Mainboard Quick Start Guide Introduction Hardware Installation Quick BIOS Setup The SOYO CD F C Tested To Comply With FCC Standards FOR HOME OR OFFICE USE POST CONSUMER 00% RECYCLED PAPER SOYO
6VXE7+ USER'S MANUAL. Celeron TM /Pentium!!! Socket 370 Processor Motherboard REV. 3.0 Third Edition R ME-6VXE7P-3003
6VXE7+ USER'S MANUAL 1. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
BX2000+ USER'S MANUAL. 1. Support Suspend To RAM Function. (Optional) 2. CPU Over Voltage Select (Magic Booster).
BX2000+ USER'S MANUAL 1. Support Suspend To RAM Function. (Optional) 2. CPU Over Voltage Select (Magic Booster). 3. Support Dual and Write Protection. 4. System power on by PS/2 Mouse: First, enable this
Chapter 1 Specification
SL-I / I-L Chapter Specifications COM LPT Chapter Specification - Mainboard Layout and Components Setup CPU Fan Analog Monitor Front Audio CD-ROM Audio LAN Controller (for I-L) ne in CD AC'97 IT872F JKB
JumperFree TM CUA
JumperFree TM CUA 2 2000 3 4 5 6 7 8 9 10 11 3D Graphics 12 1 2 3 4 5 6 7 8 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 109 13 21.3 cm (8.38 in) PS/2KBMS VIO USB 2MB SDRAM IC_ PWR_ FAN COM2 2MB
5AX USER'S MANUAL. Support Intel Pentium, MMX, Cyrix/IBM, 6x86MX, MII, AMD, K6, K6-2 & IDT C6 CPUs. Support 3 Steps ACPI LED.
5AX USER'S MANUAL Support Intel Pentium, MMX, Cyrix/IBM, 6x86MX, MII, AMD, K6, K6-2 & IDT C6 CPUs. Support 3 Steps ACPI LED. Support Parity check or Ecc Function (at 66, 75 MHz). Support Fully AGP.0 Specification.
GA 686SLX USER'S MANUAL
GA 686SLX USER'S MANUAL. System power on by PS/2 Mouse: If you are using ATX power supply, you are able to power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
BX2000+ USER'S MANUAL. 1. Support Suspend To RAM Function. 2. CPU Over Voltage Select (Magic Booster). 3. Support Dual BIOS and BIOS Write Protection.
BX2000+ USER'S MANUAL 1. Support Suspend To RAM Function. 2. CPU Over Voltage Select (Magic Booster). 3. Support Dual and Write Protection. 4. System power on by PS/2 Mouse: First, enable this function
CUV4X. JumperFree TM PC-133 AGP/4X
CUV4X JumperFree TM PC-133 AGP/4X 2 2000 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 13 20.9cm (8.22in) PS/2 VIO CPU_FAN Socket 370 cyrix 133 VIA VT82C694X
6VXE7+ USER'S MANUAL. Celeron TM /Pentium!!! Socket 370 Processor Motherboard REV. 1.0 Second Edition R
6VXE7+ USER'S MANUAL 1. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System
Introduction CHAPTER 1
CHAPTER 1 Introduction The ACTI-788 all-in-one single board computer is designed to fit a high performance Celeron based CPU and compatible for high-end computer system application with PCI/ISA bus architecture.
5AX USER'S MANUAL. Support Keyboard Power ON/OFF function. Thermal Protection. Pentium Processor PCI - ISA BUS MAINBOARD REV. 3.
5AX USER'S MANUAL Support Intel Pentium, MMX, Cyrix/IBM 6x86MX, MII, AMD K5, K6, K6-2 & IDT C6 CPUs. Support auto detect CPU Voltage. Support Parity check or Ecc Function. Support Fully AGP.0 Specification.
CUV4X-E. JumperFree TM PC-133/VC MHz FSB AGP PRO/4X Socket 370
CUV4X-E JumperFree TM PC-133/VC133 133MHz FSB AGP PRO/4X Socket 370 2 2000 3 4 5 6 7 8 9 10 11 12 1 2 3 4 567 8 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 13 20.9cm (8.22in) PS/2 VIO USB COM1 LED Socket
CLK. Slot1 VIA ATX Mainboard. User s Manual 4
2.1. Mainboard Layout Drawing CLK AGP 1 H14.318 Slot1 VIA693-133 ATX Mainboard ISA2 ISA1 User s Manual 4 2.2. Hardware Installation Steps 2.2.1. Installing System Memory The mainboard is equipped with
A7A266-E DDR RAM/SDRAM 266MHz FSB AGP Pro/4X Socket A
A7A266-E DDR RAM/SDRAM 266MHz FSB AGP Pro/4X Socket A 2 2001 3 4 5 6 7 8 9 10 11 / 12 1 2 3 4 5 6 7 27 26 25 24 23 22 21 20 19 18 17 16 15 14 131211 109 8 13 24.5cm (9.64in) PS/2 CPU_FAN USB1 USB2 01 01
5AA USER'S MANUAL. Support Intel Pentium, MMX, Cyrix/IBM 6x86MX, MII, AMD K6, K6-2, K6-III, IDT Winchip 2, IDT Winchip 3 & RISE MP6 CPUs.
AA USER'S MANUAL Support Intel Pentium, MMX, Cyrix/IBM xmx, MII, AMD K, K-, K-III, IDT Winchip, IDT Winchip & RISE MP CPUs. Support parity check or ECC function. Support fully AGP.0 specification. Support
ROBO-603. User's Manual
ROBO-603 Embedded System Board User's Manual P/N: 861106030041 Version 1.0 Copyright Portwell, Inc., 2001. All rights reserved. All other brand names are registered trademarks of their respective owners.
6VA+ USER'S MANUAL. Pentium II/!!!/Celeron TM Processor Motherboard REV. 1.0 First Edition R
VA+ USER'S MANUAL. System power on by PS/ Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/ Mouse.. System power
6BX7+ USER'S MANUAL. Celeron TM /Pentium!!! Socket 370 Processor MAINBOARD REV. 1.1 First Edition R
6BX7+ USER'S MANUAL. Support Suspend To RAM Function. 2. CPU Over Voltage Select (Magic Booster). 3. Support Dual BIOS and BIOS Write Protection. 4. System power on by PS/2 Mouse: First, enable this function
Introduction CHAPTER 1
CHAPTER 1 Introduction The ROBO-667 all-in-one single board computer is designed to fit a high performance Pentium-III based CPU and compatible for high-end computer system with PCI/ISA Bus architecture.
IV. Suspend to RAM Installation A.1 Introduce STR function: A.2 STR function Installation. There are two ways to accomplish this:
Suspend To RAM Installation IV. Suspend to RAM Installation A.1 Introduce STR function: Suspend-to-RAM (STR) is a Windows 98 ACPI sleep mode function. When recovering from STR (S3) sleep mode, the system
The ROBO-8710VLA package should cover the following basic items
The ROBO-8710VLA all-in-one full size single board computer is designed to fit high performance and scalable Intel Pentium 4/Celeron processors and compatible for high-end industrial computer system with
IV. Suspend to RAM Installation A.1 Introduce STR function: A.2 STR function Installation
6WXM IV. Suspend to RAM Installation A.1 Introduce STR function: Suspend-to-RAM (STR) is a Windows 98 ACPI sleep mode function. When recovering from STR (S3) sleep mode, the system is able, in just a few
A7PRO. Jumper TM PC133/VC MHz FSB AGP Pro/4X
A7PRO Jumper TM PC133/VC133 200MHz FSB AGP Pro/4X 2000 2 3 4 5 6 7 8 9 10 11 / 12 1 2 3 4 5 6 7 8 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 13 24.5cm (9.64in) PS/2 JTPWR PWR_FAN VIO USB COM1 Socket
PCM-4153-A2 PC/104+ SBC w/amd LX800, VGA, LCD, Dual LAN, USB 2.0, On-board Flash and Memory Startup Manual
PCM--A PC/0+ SBC w/amd LX800, VGA, LCD, Dual LAN, USB.0, On-board Flash and Memory Startup Manual Packing List Specifications Before you begin installing your card, please make sure that the following
User s Manual Full-Size PICMG 1.3 SHB Version 1.0
3308360 User s Manual Full-Size PICMG 1.3 SHB Version 1.0 Copyrights This document is copyrighted and all rights are reserved. It does not allow any non authorization in copied, photocopied, translated
FS-A70. Test Report. Edition 1.2
FS-A70 Test Report Edition 1.2 Index Index...2 1. Function test...4 2 1.1 Hardware function... 4 1.2 BIOS function... 6 1.3 Driver... 8 2. Compatibility test...9 2.1 CPU Test... 9 2.2 Memory Test... 10
810DTC/810DT+ Pentium II/III Celeron Twin Processor
810DTC/810DT+ Pentium II/III Celeron Twin Processor AT MAINBOARD ( VER. 3.x ) USER S MANUAL DOC. NO. UM-810DTC-E2...PRINTED IN TAIWAN TABLE OF CONTENTS TABLE OF CONTENTS CHAPTER & SECTION Page 1. INTRODUCTION...1-1
Introduction CHAPTER 1
CHAPTER 1 Introduction The ACTI-777 all-in-one single board computer is designed to fit a high performance Pentium-III FC-PGA based CPU and compatible for high-end computer system application with PCI/ISA
P4BWA. Test Report. Edition 1.0
P4BWA Test Report Edition 1.0 Index Index...2 1. Function test...4 2 1.1 Hardware function... 4 1.2 BIOS function... 6 1.3 Driver... 8 2. Compatibility test...9 2.1 CPU Test... 9 2.2 Memory Test... 10
Chapter 2 HARDWARE INSTALLATION. 2.1 Central Processing Unit: CPU CHAPTER 2
Chapter 2 HARDWARE INST 2.1 Central Processing Unit: CPU The mainboard operates with Intel Pentium II/Celeron TM processor. The mainboard uses a CPU Slot called Slot 1 for easy CPU installation and a jumper
MAINBOARD. Installation Guide
MAINBOARD Rev: 1.01H Date: May - 99 All other product names are trademarks or copyrights of their respective owners. Specifications and information contained in this manual are subject to change without
FAN3 Connector AUX-IN Connector. CD-IN Connector FAN2 Connector. Intel /100 LAN Controller CPU2 FAN Connector AGP Pro Slot USB Connector
PS/2 Mouse Connector SPP/EPP/ECP Parallel Port RJ45 0/00 LAN Jack (Optional) Speaker Out FAN3 Connector AUX-IN Connector PS/2 Keyboard Connector USB Port Port 2 Port Line-In MIC-In CD-IN Connector FAN2
Important Information
Important Information Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual,
Trademarks. IBM, PC/AT, and PC/XT are trademarks of International Business Machines Corporation.
The information presented in this publication has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. Specifications are subject to change without notice. Trademarks
ES-270. Test Report. Edition /08/02
ES-270 Test Report Edition 1.1 2007/08/02 Identify:Gary Test Engineer: Les Index Index...2 1. Function test...4 2 1.1 Hardware function... 4 1.2 BIOS function... 6 1.3 Driver... 7 2. Compatibility test...8
AIMB-210 (Intel Atom processor N GHz FSB 533 MHz Mini-ITX Motherboard with VGA, LVDS, TV-Out, 6 COM, Dual GbE, 8 USB, 2 SATA II) Startup Manual
AIMB-210 (Intel Atom processor N270 6 GHz FSB 533 MHz Mini-ITX Motherboard with VGA, LVDS, TV-Out, 6 COM, Dual GbE, 8 USB, 2 SATA II) Startup Manual Before you begin installing your card, please make sure
ROBO-698 is a full-sized SBC, and therefore is able to run on any PICMG backplane, active or passive.
Troubleshooting This chapter provides you a few useful tips to quickly get your ROBO-698 running with no failure. As basic hardware installation has been addressed in Chapter 3, this chapter will basically
P4B533-X. Motherboard
P4B533-X Motherboard C1458 2003 2 3 4 5 6 7 1 2 2 3 Jumper Mode Jumper Free (Default) 8 9 10 1-1 1-2 1-3 1-4 SB_PWR1 P4B533-X P4B533-X Onboard LED ON Standby Power OFF Powered Off 1-5 CPU_FAN1 ATX12V1
FCC Compliance Statement:
DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 077(a) Responsible Party Name: G.B.T. INC. Address: 8305 Valley Blvd., Suite#A LA Puent, CA 9744 Phone/Fax No: (88) 854-9338/ (88) 854-9339 hereby declares
TriGem Micro-ATX Motherboard (FLORIDA-C)
TriGem Micro-ATX Motherboard (FLORIDA-C) Table of Contents I. Introduction 1. Generation Description ------------------------------------------------------------ 2 2. Function Block Diagram ------------------------------------------------------------
PCM-9584 Onboard Intel Pentium M EBX SBC with Audio, VGA 2LVDS and LAN
PCM-9584 Onboard Intel Pentium M EBX SBC with Audio, VGA 2LVDS and LAN Packing List Before you begin installing your card, please make sure that the following materials have been shipped: 1 PCM-9584 all-in-one
PCA-6781 ISA Celeron M Half-sized SBC with VGA/ LCD/LVDS/10/100 Ethernet/USB2.0 and SSD Startup Manual
PCA-6781 ISA Celeron M Half-sized SBC with VGA/ LCD/LVDS/10/100 Ethernet/USB2.0 and SSD Startup Manual Packing List Specifications Before you begin installing your card, please make sure that the following
Product Test Report. Product Version. Report Edition 1.0 BIOS Version 1.0 Testing Engineer
Product Test Report Product Name FS-A71 Product Version A Issued Date 3.Setpember.2008 Report Edition 1.0 BIOS Version 1.0 Testing Engineer Gary Index Index...2 1. Function test...4 1.1 Hardware function...
CPU fan has a power connector which needs to be connected to CPU fan power socket on your motherboard as shown on the image above.
The first thing you should do is unpack your ATX case. Take off the cover of your case so that you can access the inside. Place the case on a desk so that you are looking down towards the open case. Your
PCM-9562 Intel Atom N450/D510 EBX SBC with 3LAN/6 COM/3 SATA/8 USB2.0/2 Watchdog Startup Manual
PCM-9562 Intel Atom N450/D510 EBX SBC with 3LAN/6 COM/3 SATA/8 USB2.0/2 Watchdog Startup Manual Packing List Before you begin installing your card, please make sure that the following items have been shipped:
BIOS Setup DESKPOWER 6000
BIOS Setup DESKPOWER 6000 1 Preface What is BIOS setup? BIOS setup is a program that helps the user set up a hardware environment, including memory, hard disks, and floppy disk drives. Minimum setup has
Copyright and Warranty Notice
Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility
LV-651 Test Report. Edition /09/26
LV-651 Test Report Edition 1.02 2006/09/26 Index Index...2 1. Function test...4 1.1 Hardware function... 4 1.2 BIOS function... 6 1.3 Driver... 7 2. Compatibility test...8 2.1 VGA Graphic Test... 8 2.2
MMX Enhanced. 586 GXM-AV Main Board. Trademarks and / or Registered trademarks are the properties of their respective owners.
586 GXM-AV Main Board Trademarks and / or Registered trademarks are the properties of their respective owners. User s Manual Version 1.1 The Information presented in this publication has been carefully
BIOS Setup DESKPOWER 5000
BIOS Setup DESKPOWER 5000 1 Preface What is BIOS setup? BIOS setup is a program that helps the user set up a hardware environment, including memory, hard disks, and floppy disk drives. Minimum setup has
LV-681. Mini-ITX motherboard. User s Manual. Edition: /04/09. LV-681 User s Manual 1
LV-681 Mini-ITX motherboard User s Manual Edition: 1.00 2007/04/09 LV-681 User s Manual 1 Copyright The trademarks mentioned in the manual are legally registered to their respective companies. Disclaimer
Frequently Asked Question
Appendix A Frequently Asked Question Q: How can I identify the mainboard BIOS version? A: The AOpen mainboard BIOS version appears on the upper-left corner of the POST (Power-On Self Test) screen. Normally,
EXP8049. User s Manual TABLE OF CONTENTS
EXP8049 User s Manual TABLE OF CONTENTS CHAPTER INTRODUCTION.... OVERVIEW....2 SYSTEM FEATURES....3 SYSTEM SPECIFICATION... 2.4 SYSTEM PERFORMANCE... 2.5 EXP8049 BOARD LAYOUT... 3 CHAPTER 2 INSTALLATION...4
PCM-9388 Celeron M 3.5 SBC with PC/104, VGA/ TTL/LVDS Ethernet/USB 2.0 and SSD Startup Manual
PCM-9388 Celeron M 3.5 SBC with PC/104, VGA/ TTL/LVDS Ethernet/USB 2.0 and SSD Startup Manual Packing List Specifications Before installation, please make sure that you have received the following: 1.
EC Declaration of Conformity
EC Declaration of Conformity We IWILL Corporation No. 10, Wu Chuan 3rd Rd., Hsin Chuang City, Taipei, Taiwan, R.O.C. Declare under sole responsibility that the VD133 motherboard Meets the intent of Directive
Copyright and Warranty Notice
Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility
Index. Index Function test Compatibility test Environmental test Reliability Test...22
Index Index...1 1. Function test...3 1.1 Hardware function... 3 1.2 BIOS function... 5 1.3 Driver... 7 2. Compatibility test...8 2.1 CPU Test... 8 2.2 Memory Test... 9 2.3 VGA Graphic Test... 10 2.4 Audio
MAINBOARD. Installation Guide
MAINBOARD Rev: 1.00H Date: April - 99 All other product names are trademarks or copyrights of their respective owners. Specifications and information contained in this manual are subject to change without
M ultiplie r Bus S pe e d (set Jm prs on board) (s et in BIOS) CPU speed JP10 JP11 JP12 JP13 3.5 100 350 133* 466 ON OFF OFF ON 4 100 400 133* 533 OFF ON ON ON 66 300 4.5 100 450 OFF ON OFF ON 133* 600
SY-6BA+III. Quick Start Guide. Motherboard F C. Introduction. Installation. Hardware. Quick BIOS Setup. The SOYO CD
SY-6BA+III Motherboard Introduction Quick BIOS Setup Hardware Installation Quick Start Guide The SOYO CD F C Tested To Comply With FCC Standards FOR HOME OR OFFICE USE POST CONSUMER 100% RECYCLED PAPER
5-1 Backplane & Power Supply setup. Q : Which backplane does ACTI-777 support??
CHAPTER 5 Troubleshooting This chapter provides you a few useful tips to quickly get your ACTI-777 running with no failure. As basic hardware installation has been addressed in Chapter 3, this chapter
Trademarks. IBM, PC/AT, and PC/XT are trademarks of International Business Machines Corporation.
The information presented in this publication has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. Specifications are subject to change without notice. Trademarks
FCC Compliance Statement:
DECLARATI OF CFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: G.B.T. INC. Address: 18305 Valley Blvd., Suite#A LA Puent, CA 91744 Phone/Fax No: (818) 854-9338/ (818) 854-9339 hereby declares
Motherboard Specifications, A8AE-LE (AmberineM)
1 of 7 6/28/2009 11:14 PM» Return to original page Motherboard Specifications, A8AE-LE (AmberineM) Motherboard specifications table Motherboard layout and photos Clearing the CMOS settings Clearing the
FCC Compliance Statement:
DECLARATI OF CFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: G.B.T. INC. Address: 18305 Valley Blvd., Suite#A LA Puent, CA 91744 Phone/Fax No: (818) 854-9338/ (818) 854-9339 hereby declares
PCM-4381 Intel Pentium M EPIC SBC with VGA/2 LVDS/ 2 Ethernet/ 4 COM/ 2 SATA/6 USB 2.0/ 16 bit GPIO
PCM-4381 Intel Pentium M EPIC SBC with VGA/2 LVDS/ 2 Ethernet/ 4 COM/ 2 SATA/6 USB 2.0/ 16 bit GPIO Before you begin installing your card, please make sure that the following items have been shipped: 1.
LS-371. Test Report. Edition /11/05
LS-371 Test Report Edition 1.2 2007/11/05 Identify: Gary Test Engineer: Les Index Index...2 1. Function test...4 2 1.1 Hardware function... 4 1.2 BIOS function... 6 1.3 Driver... 8 2. Compatibility test...9
PCM-9588 Intel Celeron M EBX SBC with DVI/ TTL/ VGA/ LVDS/ LAN/ 6 COM/ 2 SATA/ 6 USB2.0/16-bit GPIO Startup Manual
PCM-9588 Intel Celeron M EBX SBC with DVI/ TTL/ VGA/ LVDS/ LAN/ 6 COM/ 2 SATA/ 6 USB2.0/16-bit GPIO Startup Manual Packing List Before you begin installing your card, please make sure that the following