QCB Hardware DVT Test Report. Revision:V1.0. Dec Copyright EFCO EverFine Industrial Co. Ltd.

Transcription

1 QCB-3520 Hardware DVT Test Report Revision:V1.0 Dec 2015

2 Revision History Revision Date Author Changes /12/04 Think Chen Official Release

3 CONTENTS 1 Summary Product overview Product Image Functional Test Functional Tests Status: Test Setup Testing Result Summary Ethernet Testing Result Summary Ethernet Function Ethernet LED State Table Wake on LAN Power Functionality AT/ATX Mode (J9) of jumper setting ATX cold boot function AT cold boot function S3/S5 Mode Select (J10) of jumper setting LID and Sleep Function (Microsoft Windows OS support) USB Function USB Host and Client (J1) of jumper setting USB 1.1 and USB USB Display Function HDMI function LVDS Function Serial ATA Configuration msata or PCI Express (J5) of jumper setting SATA and msata port PCI Express BUS Function SDIO CAN BUS Transceiver Function GPIOs Function E-PORT Expansion Function Functional Tests Status: Compatibility Test QSeven Module of Specification Revision USB Devices SD Card Mini PCI Express Card Serial ATA Interface msata Display Monitor Power Source Compatibility Test Status: Performance Test Performance Test Status:... 18

4 4.2 SATA msata port SATA port USB USB USB SDIO Ethernet 1000 Base-T Reliability test Tested Interfaces Chamber Test High Temperature and Humidity Test Low Temperature Test Power-on and Power-off Self-Test ATX Mode High Temperature Power ON/OFF Test ATX Mode Low Temperature Power ON/OFF Test... 22

5 1 Summary 1.1 Product overview Product Image TOP Bot

6 I/O rear EPORT

7 2 Functional Test This section describes the basic functionality tests of QCB It includes functionality of connectors, ports, jumper settings, pin handers, wafer header, LEDs, buttons, switches, descriptions and element place. 2.1 Functional Tests Status: 2.2 Test Setup Equipment Description Carrier Board QSeven CPU Module Monitor Registration Number / Description EFCO QCB-3520 V10 Congtec conga-qa3 BenQ GW2265MH Keyboard Microsoft Wired Keyboard 600 model 1576 Mouse Microsoft Wired Keyboard 600 model 1113 SATA HDD msata Power Source(PSU or Adapter) USB Stick mini PCI Express WLAN card LCD Panel 2.3 Testing Result Summary WD WD5000LPVX Innodisk 3ME2 64GB DELTA DPS-60PBA rev03 PQI U273V 16 GB Intel 6235ANHMW AUO G121XN01V0 Test item Result Comment Processor Base on Q-seven modules Memory Base on Q-seven modules RTC Clear CMOS SATA msata SDIO Watch dog Timer(WDT) Base on Q-seven modules COM 1 Connector(RS-232) Base on Q-seven module LPC interface specification

8 COM 2 Connector(RS-232) Base on Q-seven module LPC interface specification Ethernet LAN1 Connector(RJ-45) Base on Q-seven module Ethernet LAN 2 Connector(RJ-45) Mini PCI Express Connector(Half size) Mini PCI Express Connector(Full size) USB Port1 (USB 2.0) USB Port2 (USB 2.0) USB Port3 (USB 2.0) USB Port4 (USB 3.0) EFP Connector (HDMI) HD Audio Audio Connector with jacks 12V DC Input E-PORT(expansion) LFP(LVDS) Backlight Control Power Panel Power Front Panel - Power Button Front Panel - Reset Button Front Panel - Power LED Front Panel - HDD LED Sleep Button LID Button SFAN1 CFAN1 SPI BIOS(Module) Base on Q-seven modules

9 2.4 Ethernet Testing Result Summary Test Step Result Remark LED State Table Wake on LAN Upload and download large file Ethernet Function Verify the LAN LED light for 10M, 100M and 1G Verify the LAN signals with 10M, 100M and 1000M speed Download large file from networking Ethernet LED State Table LAN1 Base on QSeven module. LAN2 Intel i210-at LAN Status LED1 (Link) LED2 (SPEED) Network link is not established or system power off OFF OFF 10 Mbps(10 Base- T) 100 Mbps(100 Base-TX) 1000 Mbps(1000 Base-T) 10 Full Duplex Amber OFF Link/Active Blinking OFF 100 Full Duplex Amber Green Link/Active Blinking ON 1000 Full Duplex Amber Orange Link/Active Blinking ON Wake on LAN

10 Test Step Result Remark Enter standby mode S3 (Suspend to RAM) Shut down into S5 (Soft off) Shut down into S4 (Hibernate) 2.5 Power Functionality AT/ATX Mode (J9) of jumper setting Set 1-2 pins of J5 short for Set 2-3 pins of J5 short for (Default) AT mode ATX mode ATX cold boot function ATX cold boot AT cold boot function AT cold boot S3/S5 Mode Select (J10) of jumper setting Set 1-2 pins of J10 short for ATX supply controlled by signal S3 (Default) Set 2-3 pins of J10 short for ATX supply controlled by signal S5 S3 S5

11 2.5.5 LID and Sleep Function (Microsoft Windows OS support) LID SLP 2.6 USB Function USB Host and Client (J1) of jumper setting Set 1-2 pins of J1 short for Client Set 2-3 pins of J1 short for Host (Default) Client Host N/A USB 1.1 and 2.0 Test step Port 0 Port 1 Port 2 Port 3 USB Keyboard and USB Mouse function Boot from USB-Stick Boot from USB-Stick with USB Hub USB 2.0 Test step Port 0 Port 1 Port 2 Port 3 Boot from USB-Stick (2.0) Boot from USB-Stick (2.0) with USB Hub (2.0) File transfer (2.0) mark BurnInTest (15min) Boot from USB-Stick (2.0) USB 3.0

12 Test step Port 0 Boot from USB-Stick (3.0) Boot from USB-Stick (3.0) with USB Hub (3.0) File transfer (3.0) mark BurnInTest (15min) 2.7 Display Function HDMI function Verify of HDMI port LVDS Function Backlight control (J2) of jumper setting Set 1-2 pins of J2 short for +12V (Default) Set 2-3 pins of J2 short for +5V +12V +5V Brightness function (J3) of jumper setting Set 1-2 pins of J3 short for +3.3V Set 2-3 pins of J3 short for +5V (Default) +3.3V +5V Backlight Enable (J4) of jumper setting Set 1-2 pins of J4 short for Backlight enable HIGH active (Default) Set 2-3 pins of J4 short for Backlight enable LOW active HIGH active

13 LOW active 2.8 Serial ATA Configuration msata or PCI Express (J5) of jumper setting Set 1-2 pins of J5 short for msata signal Set 2-3 pins of J5 short for PCI-Express signal (Default) msata PCI Express SATA and msata port Verify connected driver by BIOS Verify the installation the operation system Verify the boot status msata(mini PCI Express slot) at Sequential Read(Q= 32,T= 1) msata(mini PCI Express slot) at Sequential Write(Q= 32,T= 1) SATA port at Sequential Read(Q= 32,T= 1) SATA port at Sequential Write(Q= 32,T= 1) MB/s MB/s MB/s MB/s 2.9 PCI Express BUS Function Verify PCIE signal Verify USB signal 2.10 SDIO

14 Boot from SDIO HDD file transfer, 30 MByte, r/w File transfer mark BurnInTest (15min) Sequential Read(Q= 32,T= 1) Sequential Write(Q= 32,T= 1) MB/s MB/s 2.11 CAN BUS Transceiver Function Set 1-2 pins of J6 short for enable CAN BUS function Set 1-2 pins of J6 short for disable CAN BUS function CAN BUS Function *have not for CAN BUS fixture. TBD 2.12 GPIOs Function Verify GPIOs function *have not for CAN BUS fixture or API. TBD 2.13 E-PORT Expansion Function Verify E-PORT function Verify expansion IOM of Serial 4xRS-232/422/485 Verify expansion IOM of GPIO 16 x DI,16 x DO Verify expansion IOM of Network 3 x Gigabit Ethernet Verify expansion IOM of USB3 4 x USB 3.0 Verify expansion IOM of PoE 1 x PoE Verify expansion IOM of EXP 1x mini PCIe 2.14 Functional Tests Status:

15 3 Compatibility Test 3.1 Compatibility Test Status: QSeven Module of Specification Revision 2.0 Maker Model Function Result congatec Qseven conga-qa3 QSeven CPU on module congatec Qseven conga-qg QSeven CPU on module congatec QSeven conga-qmx6 ARM Base CPU on module *Conditional verify to test of conga-qmx6 module. 3.3 USB Devices Maker Model Function Result PQI U273V 16 GB USB-Stick Kingston DataTraveler 32 GB USB-Stick Transcend USB-Stick 8 GB USB-Stick Microsoft Wired Keyboard USB Mouse Microsoft Wired Keyboard USB Keyboard 3.4 SD Card Maker Model Function Result ADATA Premier UHS-I U1 MicroSDHC(C10) UHS-I 32GB(adapter) Silicon Power microsd SDHC 8GB class4 3.5 Mini PCI Express Card Maker Model Function Result Intel 6235ANHMW Intel Centrino Advanced-N 6235, Dual Band Bplus Tech MM2U MM2U V1.2(Half to Full minicard Adapter)

16 Spark WPER-116GN b/g/n Half Mini Card, Ralink RT3090, 1T1R Half Mini Card, Ralink RT3090, 1T1R 3.6 Serial ATA Interface Maker Model Function Result Western Digital WD1600BEVT 160GB HDD Seagate Laptop Think HDD ST500LT GB HDD SANSUNG HM251JI 250GB HDD Western Digital WD5000LPVX 500GB HDD Seagate Barracuda ST2000DL003 2TB HDD 3.7 msata Maker Model Function Result ADATA SP GB innodisk 3ME2 64GB 3.8 Display Monitor Maker Model Function Result Viewsonic VX2270Smh-LED x 1080 full HD BenQ GW2265MH 21.5" 16:9 1920x1080 AOC M2870V x 1080 (HD 1080) 3.9 Power Source Maker Model Function Result DELTA DPS-60PBA rev.03 Adapter 12V / 5A LEPA N400-SB ATX power supply Snake BT-400WL ATX power supply

17

18 4 Performance Test 4.1 Performance Test Status: 4.2 SATA msata PCI Express msata port msata(mini PCI Express slot) at Sequential Read(Q= 32,T= 1) msata(mini PCI Express slot) at Sequential Write(Q= 32,T= 1) MB/s MB/s SATA port SATA port at Sequential Read(Q= 32,T= 1) SATA port at Sequential Write(Q= 32,T= 1) MB/s MB/s 4.3 USB USB2.0 Test step Port 0 Port 1 Port 2 Port 3 Sequential Read(Q= 32,T= 1) MB/s MB/s 19.98MB/s 19.98MB/s Sequential Write(Q= 32,T= 1) MB/s MB/s 12.22MB/s MB/s USB 3.0 Test step Port 0

19 Sequential Read(Q= 32,T= 1) Sequential Write(Q= 32,T= 1) MB/s MB/s 4.4 SDIO Sequential Read(Q= 32,T= 1) Sequential Write(Q= 32,T= 1) MB/s MB/s 4.5 Ethernet 1000 Base-T Equipment Description Registration Number / Description Carrier Board EFCO QCB-3520 V10 QSeven CPU Module Congtec conga-qa3 Monitor BenQ GW2265MH Keyboard Microsoft Wired Keyboard 600 model 1576 Mouse Microsoft Wired Keyboard 600 model 1113 SATA HDD WD WD5000LPVX Power Source(PSU or Adapter) DELTA DPS-60PBA rev03 Lan 1 on QSeven module tested with 1000Mbit Cable length CAT6 ANSI/TIA-568-B AWG 2.0 meter Result Interval (Sec) Transfer (GBytes) Bandwidth (Mbits/Sec) 0.0 ~ Setting test server EMB-3510 E3845 Intel i-210at Lan 2 on board chipset tested with 1000MBit Cable length CAT6 ANSI/TIA-568-B AWG 2.0 meter Result Interval (Sec) Transfer (GBytes) Bandwidth (Mbits/Sec) 0.0 ~ Setting test server EMB-3510 E3845 Intel i-210at

20 5 Reliability test 5.1 Reliability Test Status: Equipment Description Registration Number / Description Carrier Board EFCO QCB-3520 V10 QSeven CPU Module Congtec conga-qa3 Monitor BenQ GW2265MH Keyboard Microsoft Wired Keyboard 600 model 1576 Mouse Microsoft Wired Keyboard 600 model 1113 HDD (SATA or msata) Innodisk 3ME2 64GB Power Source(PSU or Adapter) DELTA DPS-60PBA rev03 USB3 USB3 loopback USB2 Transcend 5.2 Tested Interfaces Ethernet cables connected to Switch HD Drive connected to SATA port Burn In Serial and Parallel Ports with loopback connectors attached USB2 and/or USB3 loopback adapters connected 5.3 Chamber Test Chamber: TERCHY MHK-408LK High Temperature and Humidity Test Purpose: Test according to IEC Bd Step. Test Condition Test Duration Test Procedure Result C 1 hrs. BurninTest

21 C to +60 C / 50% to 90% RH 35 min. BurninTest C / 90% RH 16 hrs. BurninTest C to +25 C / 90% to 50% RH 35 min. BurninTest C 1 hrs. BurninTest *Have not for wide temperature CPU module, 0 C to +60 C only Low Temperature Test Purpose: Test according to IEC Ad Step. Test Condition Test Duration Test Procedure Result C 1 hrs. BurninTest C to 0 C 1 hrs. BurninTest 3. 0 C 16 hrs. BurninTest 4. 0 C to 25 C 1 hrs. BurninTest C 1 hrs. BurninTest *Have not for wide temperature CPU module, 0 C to +60 C only. 5.4 Power-on and Power-off Self-Test Equipment Description Carrier Board QSeven CPU Module Monitor Registration Number / Description EFCO QCB-3520 V10 Congtec conga-qa3 BenQ GW2265MH Keyboard Microsoft Wired Keyboard 600 model 1576 Mouse Microsoft Wired Keyboard 600 model 1113 HDD (SATA or msata) Power Source(PSU or Adapter) Innodisk 3ME2 64GB DELTA DPS-60PBA rev03

22 ATX Mode High Temperature Power ON/OFF Test Step. Test Condition Test Duration Total times /Loops Result C 1 hrs C to +60 C / 50% to 90% RH 35 min C / 90% RH 16 hrs times C to +25 C / 90% to 50% RH 35 min C 1 hrs ATX Mode Low Temperature Power ON/OFF Test Step. Test Condition Test Duration Total times /Loops Result C 1 hrs C to 0 C 1 hrs C 16 hrs times 4. 0 C to 25 C 1 hrs C 1 hrs.