TERMS AND CONDITIONS PRODUCT GUIDE WITH LIST PRICING. FOR ORDERS: FAX (818) TOLL-FREE (877)

Transcription

1 TERMS AND CONDITIONS 2015 PRODUCT GUIDE WITH LIST PRICING FOR ORDERS: FAX (818) TOLL-FREE (877) Nordhoff Street, Chatsworth, CA PHONE (818) FAX (818) TOLL-FREE (800) Smart. Reliable. Secure. Pricing and Specifications subject to change without notice COPYRIGHT 2014

2 PRODUCT GUIDE MULTI-DOOR ACCESS CONTROL SYSTEMS 2-DOOR ACCESS CONTROL PANELS SK-ACPE-LE 2-Door Control Panel, w/ethernet, 10 X 11 Enclosure, Circuit Board and Connectors SK-ACPE-NE 2-Door Control Panel, w/ethernet, No Enclosure, Circuit Board and Connectors SK-ACPE-PCBA Board only for SK-ACPE, No Enclosure, no connectors (order as replacement for control panel board) Complete 2-Door Kits with e*tag Technology (Just Add Locks and Cable) e*access1 Starter Kit w/ SK-ACPE, Two e*tag Mullion Readers (ET8-RO-W-M), Software, RS-232E cable, DC Supply, 25 ETCI04 Cards 1, e*access2 Starter Kit w/ SK-ACPE, Two e*tag switchplate Readers (ET4-WXS), Software, RS-232E cable, DC Supply, 25 ETCI04 Cards 1, e*access3 Add-On Kit w/ SK-ACPE, Two e*tag Mullion Readers (ET8-RO-W-M), DC Supply 1, e*access4 Add-On Kit w/ SK-ACPE, Two e*tag switchplate Readers (ET4-WXS), DC Supply 1, e*access5 Starter Kit w/ SK-ACPE, Two e*tag Mullion Readers (ET8-RO-W-M), Software, RS-232E cable, DC Supply (no cards) 1, e*access6 Starter Kit w/ SK-ACPE, Two e*tag switchplate Readers (ET4-WXS), Software, RS-232E cable, DC Supply (no cards) 1, Complete 2-Door Kits with Radio Key Technology (Just Add Locks and Cable) SYSKIT-1 Starter Kit w/ SK-ACPE, Two RK-WM Readers, Software, RS-232E cable, DC Supply, 25 RKCM02 Cards 1, SYSKIT-2 Starter Kit w SK-ACPE, Two RK-WS Readers, Software, RS-232E cable, DC Supply, 25 RKCM02 Cards 1, SYSKIT-3 Add-On Kit w/ SK-ACPE, Two RK-WM Readers, DC Supply, 1, SYSKIT-4 Add-On Kit w/ SK-ACPE, Two RK-WS Readers, DC Supply, 1, SYSKIT-5 Starter Kit w/ SK-ACPE, Two RK-WM Readers, Software, RS-232E cable, DC Supply (no cards) 1, SYSKIT-6 Starter Kit w/ SK-ACPE, Two RK-WS Readers, Software, RS-232E cable, DC Supply (no cards) 1, MULTI-DOOR ACCESS CONTROL PANELS - Expand up to 16 doors SK-MRCP-LE NOVA.16 Multi-Reader Control Panel, 10 x 11 Enclosure, PCBA and connectors 1, SK-MRCP-NE NOVA.16 Multi-Reader Control Panel, No Enclosure, PCBA and connectors 1, SK-MRCP-PCBA NOVA.16 Multi-Reader Control Panel, No Enclosure, PCBA, no connectors 1, Complete 4-Door Kits with Radio Key Technology (Just Add Locks and Cable and Cards) SK-MRCP-4RKDT-M NOVA.16 4-door Kit, Panel, Software, Power Supply, 4 RKDT-SR (mullion) dual-tech prox smart readers (cards not incl). 2, SK-MRCP-4RKDT-S NOVA.16 4-door Kit, Panel, Software, Power Supply, 4 RKDT-SR (wall switch) dual-tech prox smart readers (cards not incl). 2, Complete 4-Door Kits with e*tag Technology (Just Add Locks and Cable and Cards) SK-MRCP-4ET8SR-M NOVA.16 4-door Kit, Panel, Software, Power Supply, 4 e*tag (mullion) contactless smart readers (cards not incl). 2, SK-MRCP-4ET8SR-S NOVA.16 4-door Kit, Panel, Software, Power Supply, 4 e*tag (wall switch) contactless smart readers (cards not incl). 2, SMART READERS - Use with NOVA.16 (SK-MRCP) - e*tag (ET-x) Technology ET8-SR-X-M Single-door Controller, RS485, e*tag Contactless Technology, mullion, black ET8-SR-X-D-I Single-door Controller, RS485, e*tag Contactless Technology, switchplate, Decorator (indoor), Ivory ET8-SR-X-D-W Single-door Controller, RS485, e*tag Contactless Technology, switchplate, Decorator (indoor), white Accessories for e*tag Smart Readers SK-SR1 SecuRelay Intelligent Relay Module- Use with Smart Readers for Exterior Applications Cards / Key Tags for e*tag Smart Readers and e*access Kits (see above) Specify Personalization when ordering: Data Format (26 or 32 bit), Facility Code, Card ID Number range Important: Custom Printed and/or Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces, unless buying a prepackaged set. ETCI04 C ISO Cards, Encrypted Wiegand Data. Secura Key logo standard, plain white/glossy is available Options: Slot (Portrait/Landscape), Photo Flap, Mag Stripe (1/2, 2750 Oerstad), Custom Artwork, ETCI04-PK25 Pack of 25 e*tag cards, pre-encoded facility code and sequential numbers ETCI C LOT card orders of 1000 or more, one facility code, sequentially numbered with no gaps 3.93 ETST03 C Compact Key Tag, Encrypted Wiegand Data 5.00 Options: Barcode (requires complete technical specification), Custom Artwork ETST03-PK25 Pack of 25 e*tag key tags, pre-encoded facility code and sequential numbers ETST C LOT card orders of 1000 or more, one facility code, sequentially numbered with no gaps 4.25 ETKT03 C Bullnose Key Tag, Encrypted Wiegand Data 5.08 ETKT C LOT orders of 1000 or more, one facility code, sequentially numbered with no gaps 4.32 Options: Punch (Hole/Moon), Eyelet, Barcode (requires complete technical specification) Custom Artwork ETAT03 C Adhesive Tag, Encrypted Wiegand Data

3 SMART READERS - Use with NOVA.16 (SK-MRCP)- Radio Key (RK-x) Technology RKDT-SR-M Single-door Controller, RS485, Radio Key & HID Proximity, mullion, black RKDT-SR-S Single-door Controller, RS485, Radio Key & HID Proximity, switchplate, black Accessories For Smart Readers SK-SR1 SecuRelay Intelligent Relay Module for Exterior Applications Cards / Key Tags for Radio Key Smart Readers & SYS-KITS (see above) Specify Personalization when ordering: Data Format (26 or 32 bit), Facility Code, Card ID Number range Important: Custom Printed and/or Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces, unless buying a prepackaged set. PRODUCT GUIDE RKCI02 C ISO Cards, Field Printable, Sequentially Numbered w/ Facility Code 4.69 RKCI C LOT card orders of 1000 or more, one facility code, sequentially numbered with no gaps 3.98 Options: Slot (Portrait/Landscape), Photo Flap, Mag Stripe (1/2, 2750 Oerstad), Custom Artwork RKCM02 C Molded Clamshell Cards, Sequentially Numbered w/ Facility Code 2.94 RKCM C Lot card orders of 1000 or more. One facility code and sequential numbers, with no gaps RKCM-02-PK25 Pack of 25 molded cards, 26-bit, pre-encoded facility code and sequential numbers RKKT02 C Key Tags, Black Plastic, Sequentially Numbered w/ Facility Code 5.08 RKKT-02-PK25 Pack of 25 key tags, 26-bit, pre-encoded facility code and sequential numbers RKKT C Lot tag orders of 1000 or more. One facility code and sequential numbers, with no gaps SOFTWARE SKNETDM Basic SK-NET Software w/ Disk & Manual (allows 1 TCP/IP connection) SKNETMLD SK-NET w/ Multi-Location, Dial-Up and multiple TCP/IP connections For 1 User, includes ID Badge Printing Capability SK-NET-MLD-UPGRADE Upgrade an existing SK-NET-MLD to latest version (must include serial number from customer s current software) SK-NET-MLD-CS2 C SK-NET Multi-Location Client/Server License For 2 Users, includes ID Badge Printing Capability 1, SK-NET-MLD-CS5 C SK-NET Multi-Location Client/Server License For 5 Users, includes ID Badge Printing Capability 1, SK-NET-MLD-CS10 C SK-NET Multi-Location Client/Server License For 10 Users, includes ID Badge Printing Capability 3, SK-NET-MLD-CS15 C SK-NET Multi-Location Client/Server License For 15 Users, includes ID Badge Printing Capability 4, Client/Server Database (ADS) Version Upgrade 9-to-11 (to add clients to older versions SK-NET-MLD)* (call factory for details) SK-ADS-VUP9-11/2 C Upgrade ADS from Version 9 to 11 for 2 users SK-ADS-VUP9-11/5 C Upgrade ADS from Version 9 to 11 for 5 users SK-ADS-VUP9-11/10 C Upgrade ADS from Version 9 to 11 for 10 users 1, SK-ADS-VUP9-11/15 C Upgrade ADS from Version 9 to 11 for 15 users 2, Client/Server Database (ADS) Version Upgrade 10-to-11 (to add clients to older versions SK-NET-MLD)* (call factory for details) SK-ADS-VUP10-11/2 C Upgrade ADS from Version 10 to 11 for 2 users SK-ADS-VUP10-11/5 C Upgrade ADS from Version 10 to 11 for 5 users SK-ADS-VUP10-11/10 C Upgrade ADS from Version 10 to 11 for 10 users SK-ADS-VUP10-11/15 C Upgrade ADS from Version 10 to 11 for 15 users 1, *Consult Technical Support Before Ordering System Expansion for Existing SK-NET-MLD CS software SK-ADS-EXP1-2 C Expand Existing SK-NET-MLD to 2 Users SK-ADS-EXP2-5 C Expand Existing SK-NET-MLD CS2 from 2 Users to 5 Users SK-ADS-EXP2-10 C Expand Existing SK-NET-MLD CS2 from 2 Users to 10 Users 2, SK-ADS-EXP2-15 C Expand Existing SK-NET-MLD CS2 from 2 Users to 15 Users 4, SK-ADS-EXP5-10 C Expand Existing SK-NET-MLD CS5 from 5 Users to 10 Users 1, SK-ADS-EXP5-15 C Expand Existing SK-NET-MLD CS5 from 5 Users to 15 Users 2, SK-ADS-EXP10-15 C Expand Existing SK-NET-MLD CS10 from 10 Users to 15 Users 1,

4 PRODUCT GUIDE Communications Accessories SK-PLUG9 DB9 Pigtail Computer Connector (for computers with COM port or SK-USB) SKQUICKCONN DB9 to RJ11 6 cable - Laptop to SK-ACP or 28SA+ (not used with SK-ACPE) NETCONVP RS-485 Converter with Power Supply (Required When Computer Is >100 From SK-ACPE, SK-MRCP or 28SA+) NETCONV RS-485 Converter without Power Supply SKMDM 56K Baud External Modem with Power Supply (Requires SK-NET-MLD software) Use with SK-ACPE or SK-MRCP SK-LAN TCP/IP External Device Server with Power Supply 1 (not used with SK-ACPE). Use with older SK-ACPs SK-LAN-MOD Serial-to-Ethernet adapter, plugs into SK-ACP New Revision. 1,2 (not used with SK-ACPE) SK-USB USB-to-Serial Converter (For Computers w/o a COM Port) SK-WLSE-MOD b/g LAN interface, plugs into CPU board at J12, use with SK-MRCP or SK-ACPE SK-WLS-MOD Serial-to-Wireless LAN adapter (802.11), plugs into SK-ACP New Revision. 1, 2 (not used with SK-ACPE) SK-ACP-CON Complete set of connectors for SK-ACP(E)-PCBA SK-WIO-1 Single-door interface, RS-485, Wiegand Input, use with SK-MRCP, fits in US J-Box More than one TCP/IP connection requires SK-NET-MLD software 2 LAN adapters do not work with older SK-ACPs or SK-ACPEs- call Factory for details. New Revision SK-ACP has larger 5A strike relays. When using LAN/WLS modules SK-ACP requires 1 Amp Power Supply. Other Accessories SK-ACP-ENC 10 x 11 Enclosure for SK-ACPE, MRCP etc, beige, no lock, no tamper switch SK-ACP-PS 24 VDC Plug-In Power Supply & 4.0 AH Standby Battery. Use with SK-ACPE or SK-MRCP SK-24VDC 24 VDC Plug-In Power Supply, 1 Amp. Use with SK-ACPE or SK-MRCP SK-BAT 4.0 AH, 12 VDC Battery. Use with SK-ACPE or SK-MRCP SK-DCPWR 12VDC 1.2 A Power Supply Board (Use w/ SK-XFRMR) SK-XFRMR 16.5 VAC, 40 VA Plug-In Transformer (Use w/ SK-DCPWR, or connect directly to SK-MRCP or SK-ACPE) SKLOCK Lock & Key Set For SK-ACP(E) - (included with SK-MRCP) DTK-XR Surge Suppressor, Power & Communication Lines. Use with SK-ACPE or SK-MRCP DTK-CR Surge Suppressor, Card Reader or Keypad. Use with SK-ACPE only SK-TS-CP Enclosure Tamper Switch, use with SK-ACPE (included with SK-MRCP) RS-232E Connects 4-Pin J11 MTA connector to DB9, 6 ft long, use with SK-MRCP, SK-ACPE READERS WITH WIEGAND OUTPUT (Use with SK-ACPE only) e*tag HIGH FREQUENCY CONTACTLESS SMART CARD READERS ET4-WXM e*tag Contactless Smart Card Reader/Writer, MHz ISO 15693, Mullion, S-shaped, Black ET4-WXS e*tag Contactless Smart Card Reader/Writer, MHz ISO 15693, Switchplate, Beige ET8-RO-W-D-W e*tag Contactless Smart Card Reader, MHz, Decorator Style-White ET8-RO-W-D-I e*tag Contactless Smart Card Reader, MHz, Decorator Style-Ivory ET8-RO-W-M e*tag Contactless Smart Card Reader, MHz, Mullion, Rectangular, Black ET9-RO-W-MR e*tag Contactless Smart Card Reader, MHz, Mid-range, Black *** REDUCED PRICING*** Accessories for ET4-WXS RK-BB Back box / Spacer for ET4-WXS, Beige RK-GM Glass-Mount Kit for ET4-WXS Cards / Key Tags for e*tag Contactless Smart Card Readers Specify Personalization when ordering: Data Format (26 or 32 bit), Facility Code, Card ID Number range Important: Custom Printed and/or Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces, unless buying a prepackaged set. ETCI04 C ISO Cards, Encrypted Wiegand Data. Secura Key logo standard, plain white/glossy is available Options: Slot (Portrait/Landscape), Photo Flap, Mag Stripe (1/2, 2750 Oerstad), Custom Artwork, ETCI04-PK25 Pack of 25 e*tag cards, pre-encoded facility code and sequential numbers ETCI C LOT card orders of 1000 or more, one facility code, sequentially numbered with no gaps 3.93 ETST03 C Compact Key Tag, Encrypted Wiegand Data 5.00 Options: Barcode (requires complete technical specification), Custom Artwork ETST03-PK25 Pack of 25 e*tag key tags, pre-encoded facility code and sequential numbers ETST C LOT card orders of 1000 or more, one facility code, sequentially numbered with no gaps 4.25 ETKT03 C Bullnose Key Tag, Encrypted Wiegand Data 5.08 ETKT C LOT orders of 1000 or more, one facility code, sequentially numbered with no gaps 4.32 Options: Punch (Hole/Moon), Eyelet, Barcode (requires complete technical specification) ETAT03 C Adhesive Tag, Encrypted Wiegand Data

5 RADIO KEY LOW FREQUENCY PROXIMITY READERS RKWM Proximity Reader, Mullion, 125 KHz, Black RKWS Proximity Reader, Switchplate, 125 KHz, Beige RKWL Proximity Reader, 12 X 12, 125 KHz, Extended Range, Black RKDT-WM Proximity Reader (Dual Technology), Mullion, 125 KHz, Black RKDT-WS Proximity Reader (Dual Technology), Switchplate, 125 KHz, Beige Reads Secura Key 26 or 32-bit cards and HID 26 bit and other HID non-proprietary formats up to 37 bits. Accessories For RK-WS and RK-WL RK-BB Backbox / Spacer For RK-WS, Beige RK-GM Glass-Mount Kit For RK-WS SK-DCPWR 12VDC 1.2 A Power Supply Board for RK-WL (Use w/sk-xfrmr) SK-XFRMR 16.5 VAC, 40 VA Plug-In Transformer (Use w/ SK-DCPWR) Cards / Key Tags For RK-WM, RK-WS & RK-WL Specify Personalization when ordering: Data Format (26 or 32 bit), Facility Code, Card ID Number range Important: Custom Printed and/or Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces, unless buying a prepackaged set. RKCM02 C Molded Clamshell Cards, Sequentially Numbered w/ Facility Code 2.94 RKCM C Lot card orders of 1000 or more. One facility code and sequential numbers, with no gaps RKCM-02-PK25 Pack of 25 molded cards, 26-bit, pre-encoded facility code and sequential numbers RKCMH02 C Same as RKCM-02, encoded with HID Format SK-IDL-100 C Pack of mil PVC Field Printable Adhesive Labels (Dye-sub printable, use with RKCM01, RKCM02) RKCI02 C ISO Cards, Field Printable, Sequentially Numbered w/ Facility Code 4.69 RKCI C LOT card orders of 1000 or more, one facility code, sequentially numbered with no gaps 3.98 Options: Slot (Portrait/Landscape), Photo Flap, Mag Stripe (1/2, 2750 Oerstad), Custom Artwork RKCIH02 C Same as RKCI-02, encoded with HID Format RKKT02 C Key Tags, Black Plastic, Sequentially Numbered w/ Facility Code 5.08 RKKT-02-PK25 Pack of 25 key tags, 26-bit, pre-encoded facility code and sequential numbers RKKT C LOT key tag orders of 1000 or more, one facility code, sequentially numbered with no gaps 4.32 RKKTH02 C Same as RKKT-02, encoded with HID Format RKCM, RKCI AND RKKT credentials are all available in HID formats: SK Format No. HID Format No. Description Format 701 H10301 SIA Standard 26-bit Wiegand Format 702 N10002 Honeywell/Northern 34-bit Wiegand Format 703 H10304 HID 37-bit Wiegand with Facility Code * Format 704 H10302 HID 37-bit Wiegand, no Facility Code * * HID 37-bit format is not compatible with Secura Key systems Piezo Keypads - Use with SK-ACPE or SK-MRCP with SK-WIO-1 SK-KPM Piezo Keypad, Mullion, 26-bit Wiegand Output SK-KPS Piezo Keypad, Switchplate, 26-bit Wiegand Output STAND ALONE PROXIMITY ACCESS CONTROL PRODUCTS PRODUCT GUIDE 125 khz Proximity Technology- Standard Wiegand Output RK-65K Proximity, 65,000 User Access Control Unit, Mullion Size Reader, Black RK-65KS Proximity, 65,000 User Access Control Unit, Switchplate Reader, Beige RK65KS-KIT1 Kit Includes RK65KS switchplate reader, beige RK-HHP hand-held programmer, RK-PS 12 VDC power supply and 10 RKKT02 keytags Dual Technology Standalone Proximity Readers RKDT-SA-S Access Control Unit reads Radio Key 26/32-bit or HID 26-bit proximity cards/tags, Black switch plate size RKDT-SA-M Access Control Unit reads Radio Key 26/32-bit or HID 26-bit proximity cards/tags, Black mullion size Accessories For RK-65K/ RKDT-SA RK-HHP Hand-Held Programmer DTK-CR Surge Suppressor, Card Reader or Keypad RK-PS 12VDC 500 ma Plug-in Power Supply SK-SR1 SecuRelay Intelligent Relay Module for Exterior Applications

6 PRODUCT GUIDE Cards / Key Tags For RK-65K / RKDT-SA 6 Specify Personalization when ordering: Data Format (26 or 32 bit), Facility Code, Card ID Number range Important: Custom Printed and/or Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces, unless buying a prepackaged set. RKCM02 C Proximity Molded Card, Sequentially Numbered w/ Fac.Code 2.94 RKCM C LOT card orders of 1000 or more, one facility code, sequentially numbered with no gaps 2.49 RKCM-02-PK25 Pack of 25 molded cards, 26-bit, pre-encoded facility code and sequential numbers SK-IDL-100 C Pack of mil PVC Field Printable Adhesive Labels (Dye-sub printable, use with RKCM-01, RKCM02) RKCI02 C ISO Cards, Field Printable, Sequentially Numbered w/ Facility Code 4.69 Options: Slot (Portrait/Landscape), Photo Flap, Magstripe (1/2, 2750 Oerstad), Custom Artwork, RKKT02 C Proximity Key Tag, Sequentially Numbered w/ Fac.Code 5.08 RKKT C LOT key tag orders of 1000 or more, one facility code, sequentially numbered with no gaps 4.32 RKKT-02-PK25 Pack of 25 key tags, 26-bit, pre-encoded facility code and sequential numbers RK600 / RK600E STANDALONE WITH AUDIT TRAIL RK-600 Proximity, 600 Users, Access Control Unit with Keypad, Beige RK600e Proximity, 600 User, Access Control Unit (without Keypad), Beige RK-600T RK-600 with 10 Key Tags, Beige Accessories For RK600/RK600e RKAR Auxiliary Reader for Connection to RK600 & RK600e RKAT Audit Trail & Computer Programming Upgrade for RK600 & RK600e RK-HHP Hand-Held Programmer for RK600e SK-USB USB-to-Serial Converter For Computers Without a COM Port RK-GM Glass-Mount Kit for Installing RK600 on Inside of Window RK-BB Back Box / Spacer for RK600 & RK600e ST-2 Security Tool for Tamper-Resistant Screw RK-PS 12VDC 500 ma Plug-in Power Supply DTK-CR Surge Suppressor, Card Reader or Keypad Cards / Keytags For RK600, RK600e Specify Personalization when ordering: Data Format (26 or 32 bit), Facility Code, Card ID Number range Important: Custom Printed and/or Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces, unless buying a prepackaged set. RKCM-01 Proximity Molded Card, Random Numbering 2.94 RKCM Proximity Molded Card, Random Numbering, Bag of RKCM Proximity Molded Card, Random Numbering, Bag of SK-IDL-100 Pack of mil PVC Field Printable Adhesive Labels (Dye-sub printable, use with RKCM01, RKCM02) RKCI01 Proximity ISO Card, Random Numbering 4.69 Options: Slot (Portrait/Landscape), Photo Flap, Magstripe (1/2, 2750 Oerstad), Custom Artwork, RKKT-01 Proximity Key Tag, Random Numbering 5.08 RKKT Proximity Key Tag, Random Numbering, Bag of RKKT Proximity Key Tag, Random Numbering, Bag of STAND ALONE TOUCHCARD PRODUCTS 26SASM Touchcard, Single-door, Standalone Access Control Unit, 65,500 User, Surface Lexan Housing Accessories For 26SA PD-26 C Program Card Deck (Specify Facility Code) SK-DCPWR 12 VDC Power Supply Board (Use with SK-XFRMR) SK-XFRMR Plug-In 16.5 VAC Transformer (Use alone or with SK-DCPWR) SK-24VDC 24VDC Plug-In Power Supply, 1 Amp PMA Post-Mount Adapter Plate FMA Flange-Mount Adapter Plate SK-SR1 SecuRelay Intelligent Relay Module (Prevents intrusion by external tampering) TS Tamper Switch ST-1 Security Tool for Tamper-Resistant Screws DTK-CR Surge Suppressor, Card Reader or Keypad

7 Cards / Key Tags For 26SA PRODUCT GUIDE Specify Personalization when ordering: Facility Code, Card ID Number range Important: Custom Printed and Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces. SKC-06 C Barium Ferrite Card, Sequential Numbering w/ Fac.Code 5.14 SKC C LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps 3.59 Options: Slot (Portrait), Photo flap, Magstripe (1/2, 2750 Oerstad), Custom Artwork, SKK-06-6 C Barium Ferrite Key Tag, Sequential Numbering w/ Fac.Code with Eyelet 6.33 SKK LOT key tag order of 1000 or more, one facility code, sequntially numbered with no gaps 4.54 PDC50 Program Deck with 50 Matching SKC-06 Cards - Sequentially Numbered PDC100 Program Deck with 100 Matching SKC-06 Cards - Sequentially Numbered PDC200 C Program Deck with 200 Matching SKC-06 Cards - Sequentially Numbered , PDC250 C Program Deck with 250 Matching SKC-06 Cards - Sequentially Numbered , PDC300 C Program Deck with 300 Matching SKC-06 Cards - Sequentially Numbered , PDC500 C Program Deck with 500 Matching SKC-06 Cards - Sequentially Numbered , PDC1000 C Program Deck with 1000 Matching SKC-06 Cards - Sequentially Numbered , STAND ALONE AND MULTI-DOOR TOUCHCARD ACCESS CONTROL PRODUCTS 28SASMP Touchcard, Single-door, Standalone Access Control Unit, 65,000 User, Networkable, Surface Housing 1, NOTE: SK-NC485, RS485 Network Cable INCLUDED with all 28SA-Plus Readers Accessories For 28SA-PLUS SK-NM485 Network Module with RS485 transceiver (One Per Reader Required When Networking legacy 28SA-PLUS with serial numbers 5xx-xxxx) PD-26 C Program Card Deck (Specify Facility Code) SK-DCPWR 12VDC 1.2 A Power Supply Board (Use with SK-XFRMR) SK-XFRMR 16.5 VAC, 40 VA Plug-In Transformer (Use alone or with SK-DCPWR) SK-24VDC 24VDC Plug-In Power Supply, 1 Amp PMA Post-Mount Adapter Plate FMA Flange-Mount Adapter Plate TS Tamper Switch ST-1 Security Tool for Tamper-Resistant Screws SKQUICKCONN DB9 to RJ11 6 cable - Laptop to SK-ACP or 28SA SK-PLUG9 DB9 Pigtail Computer Connector SK-USB USB-to-Serial Converter For Computers Without a COM Port NETCONVP RS-485 Converter w/power Supply (Required When Computer Is >100 Away From SK-ACP or 28SA+) NETCONV RS-485 Converter w/out Power Supply SKMDM 56K Baud External Modem w/ Power Supply (Requires SK-NET-MLD software) SK-LAN TCP/IP External Device Server w/ Power Supply (More than one TCP/IP connection requires SK-NET-MLD software) SK-029WSM34 Exit Reader For 28SA-PLUS, Surface Housing DTK-CR Surge Suppressor, Card Reader or Keypad Cards / Key Tags For 28SA Specify Personalization when ordering: Facility Code, Card ID Number range Important: Custom Printed and Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces. SKC-06 C Barium Ferrite Card, Sequential Numbering w/ Fac.Code 5.14 SKC C LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps 3.59 Options: Slot (Portrait), Photo flap, Magstripe (1/2, 2750 Oerstad), Custom Artwork SKK-06-6 C Barium Ferrite Key Tag, Sequential Numbering w/ Fac.Code with Eyelet 6.33 SKK C LOT key tag order of 1000 or more, one facility code, sequentially numbered with no gaps with Eyelet 4.54 PDC50 Program Deck with 50 Matching SKC-06 Cards - Sequentially Numbered PDC100 Program Deck with 100 Matching SKC-06 Cards - Sequentially Numbered PDC200 C Program Deck with 200 Matching SKC-06 Cards - Sequentially Numbered , PDC250 C Program Deck with 250 Matching SKC-06 Cards - Sequentially Numbered , PDC300 C Program Deck with 300 Matching SKC-06 Cards - Sequentially Numbered , PDC500 C Program Deck with 500 Matching SKC-06 Cards - Sequentially Numbered , PDC1000 C Program Deck with 1000 Matching SKC-06 Cards - Sequentially Numbered ,

8 PRODUCT GUIDE SOFTWARE SKNETDM Basic SK-NET Software w/ Disk & Manual (allows single TCP/IP connection) SKNETMLD SK-NET w/ Multi-Location, Dial-Up and multiple TCP/IP Connections, For 1 User, includes ID Badge Printing Capability SK-NET-MLD-CS2 C SK-NET Multi-Location Client/Server License For 2 Users, includes ID Badge Printing Capability 1, SK-NET-MLD-CS5 C SK-NET Multi-Location Client/Server License For 5 Users, includes ID Badge Printing Capability 1, SK-NET-MLD-CS10 C SK-NET Multi-Location Client/Server License For 10 Users, includes ID Badge Printing Capability 3, SK-NET-MLD-CS15 C SK-NET Multi-Location Client/Server License For 15 Users, includes ID Badge Printing Capability 4, System Expansion for Existing SK-NET-MLD CS software- Note that ADS Version upgrade may be required see page 2 for part numbers SK-ADS-EXP1-2 C Expand Existing SK-NET-MLD to 2 Users SK-ADS-EXP2-5 C Expand Existing SK-NET-MLD CS2 from 2 Users to 5 Users SK-ADS-EXP2-10 C Expand Existing SK-NET-MLD CS2 from 2 Users to 10 Users 2, SK-ADS-EXP2-15 C Expand Existing SK-NET-MLD CS2 from 2 Users to 15 Users 4, SK-ADS-EXP5-10 C Expand Existing SK-NET-MLD CS5 from 5 Users to 10 Users 1, SK-ADS-EXP5-15 C Expand Existing SK-NET-MLD CS5 from 5 Users to 15 Users 2, SK-ADS-EXP10-15 C Expand Existing SK-NET-MLD CS10 from 10 Users to 15 Users 1, CUSTOM CARD OPTIONS FOR TOUCHCARD, RADIO KEY AND e*tag PRODUCTS Important: Custom Printed and Custom Programmed cards are NOT RETURNABLE. Custom Printing- Minimum Order Quantity 250 GRAPHIC-SETUP C Custom Artwork Setup - one-time setup charge, 1-4 color 2-sided printing included with cost of cards GRAPHIC-SETUP is required for non-standard mag stripe configurations, and custom numbering locations SK-SIGSETUP C Setup Of Signature Panels, Per Order SK-NUM C Non-Sequential Numbering, Per Card 1.20 SK-CLIP C Strap Clips, Each 0.63 COMMON CODE READERS SKL-03P Common Code Insert Reader - SKP-03 Program Cartridge Required SKP-03 C Program Cartridge for SKL-03P Reader (Specify Facility Code) Cards For SKL-03P Specify Personalization when ordering: Facility Code Important: Custom Printed and Custom Programmed cards are NOT RETURNABLE. Minimum card/tag order is 50 pieces. For custom graphics a minimum of 250 cards is required, see page 8 for further details). SKC-03 C Standard Card 5.14 SKC C LOT card order of 1000 or more, one facility code 3.59 Important: Custom Printed and Custom Programmed cards are NOT RETURNABLE. Options: Slot (Portrait), Photo flap, Magstripe (1/2, 2750 Oerstad), Custom Artwork, SPECIALTY READERS SK-029WSM34 Reads SKC-06 Cards, Use as Exit Reader For 28SA-PLUS, Surface Housing SK-029WSM69 Reads SKC-06 Cards, 26-Bit Wiegand Output, Surface Housing (Use with SK-ACPE-LE) SK-034WSM1 C OEM Surface Mount Touchcard reader reads SKC-04 FMT1 cards, outputs standard 26-bit Wiegand Data SK-034WSM2 C OEM Surface Mount TouchCard reader reads SKC-04 FMT2 cards, outputs Sentex 30-bit Wiegand Data SK-034WSM7 C For Select Engineered Systems, Surface Housing SK028WOGV-FMT19 C For Casi-Rusco Systems, Reads Casi-Rusco Barium Ferrite Cards SK-028WSM22 C For Mosler Linx Systems, Surface Housing, Reads Casi-Rusco Barium Ferrite Cards SK-028WSM30 C For Mosler Linx Systems, Surface Housing, Reads Casi-Rusco Barium Ferrite Cards Cards For Modern Electronics Systems SKC-08 C Standard Cards For Modern 5.14 SKC LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps 3.59 Options: Slot (Portrait), Photo flap, Magstripe (1/2, 2750 Oerstad). Custom Artwork Facility Code and Numbering is assigned by Secura Key and can not be requested. Cards For Sentex/Chamberlain, Door King, and Select Engineered Systems SKC-04 C Must specify Format Number, OEM code, facility code and sequential numbering when ordering 5.14 SKC C LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps 3.59 Options: Slot (Portrait), Photo flap, Magstripe (1/2, 2750 Oerstad), Custom Artwork 8

9 PRODUCT GUIDE Photo I.D. Printers use with SK-NET-MLD Badge Printing FEATURE SK-IDPTR-1 C Ultra Magicard Pronto, single-sided hand-fed low volume printer (dye film not included) 1, SK-IDPTR-2 C Ultra Magicard Enduro+, single-sided, auto-feed, low volume printer (dye film not included) 2, SK-IDPTR-3 C Ultra Magicard Enduro+ Duo, two-sided, auto-feed, low volume printer (dye film not included) 3, SK-IDPTR-4 C Ultra Magicard Rio Pro, single-sided, auto-feed, high volume printer (dye film not included) 6, SK-IDPTR-5 C Ultra Magicard Rio Pro Duo, two-sided, auto-feed, high volume printer (dye film not included) 6, SK-IDPTR-6 C Ultra Magicard Prima4 Uno, single-sided, auto-feed, high volume retransfer printer (dye film not included) 7, SK-IDPTR-7 C Ultra Magicard Prima4 Duo, two-sided, auto-feed, high volume retransfer printer (dye film not included) 9, SK-DF-1 C Prima 431 Dye/Retransfer film, 1000 images, complete set SK-DF-2 C Prima 433 Dye Film, order with Prima 436, 750 images, double sided SK-RXF-3 C Prima 436, Retransfer film,order with Prima 433 dye film, 1000 images SK-DF-4 C MA100 YMCKO, Dye film, Color, 100 images- for Rio Pro, Pronto, Enduro SK-DF-5 C MA250 YMCKOK Dye film, Color, 100 images (Black on back) for Rio ProDuo, EnduroDuo SK-DF-6 C MA300 YMCKO, Dye film, Color, 300 images for RioPro, Pronto, Enduro SK-CK1 C Cleaning Kit, 5 T-cards, 1 pen for Pronto Printer SK-CK2 C Cleaning Kit, 10 cards, 1 pen for Enduro and Rio Pro Printers SK-CK3 C Prima 491 Prima 4 Cleaning Kit Wiegand Cards (Sensor/HID Compatible for Wiegand Swipe Readers)* WCCI-10-XXXXXXXX C 30-mil Wiegand Card 6.72 WCCI-10-xxxxxxxx C LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps 6.04 WCCI-11-XXXXXXXX C 37-mil Wiegand Card 6.34 WCCI-11-xxxxxxxx C LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps 5.70 WCCI-14-XXXXXXXX C 47-Mil Wiegand Tuffcard 7.92 WCCI-14-xxxxxxxx C LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps 7.12 WCCI-16-XXXXXXXX C 47-Mil Wiegand/Prox Card WCCI-16-xxxxxxxx C LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps WCCI-20-XXXXXXXX C 37-mil Wiegand/HF Card - specify inlay (DESFire, Mifare, etc - iclass not available) WCCI-20-xxxxxxxx C LOT card order of 1000 or more, one facility code, sequentially numbered with no gaps Options include Magstripe, Slot. Refer to Wiegand Card Ordering Guide or Contact Factory for assistance *NOTE: Secura Key does not offer zero-gap Wiegand card encoding; if gaps in number sequence occur due to production fallout, additional cards will be supplied to fulfill the quantity ordered. Minimum card/tag order is 100 pieces. Cards must be ordered in increments of 25 (i.e.: 100, 125, 150, etc) COMMON REPAIR PARTS Wire harness, 28SA-PLUS Medeco lock and 2 keys for 26SA & 28SA-PLUS Spiral-bound manual, SK-NET Connector from Exit Reader to 28SA-PLUS Cable from SK-MDM or SK-LAN to SK-ACP or 28SA-PLUS WIRE HARNESS 26SA-10PIN (JACKETED) Door, SK-ACPE-LE 10 X11 (Mates w/ # ) Housing, SK-ACPE-LE (10 X11 ) (Mates W/ ) SKNC485 RS-485 communications cable for 28SA-PLUS

10 CONDITIONS AGREED BY BOTH PARTIES LIST PRICES 2015 TERMS AND CONDITIONS A. Acceptance, Modification. Acceptance by Buyer of delivery of the goods indicates acceptance by Seller and Buyer of the Warranty and Terms and Conditions herein. Any additional or different terms proposed by Buyer shall be deemed objected to by Seller without need of further notice of objection and shall be of no effect nor in any circumstances binding upon Seller. No provision of these Terms and Conditions shall be deemed waived, amended or modified by either party unless such waiver, amendment or modification be in writing signed by a duly authorized signatory of the party against whom it is sought to enforce the waiver, amendment or modification. B. Cancellation. This sale cannot be canceled except upon terms that will compensate Seller against loss and not unless written approval of said cancellation has been obtained from Seller. C. Claims. (1) Buyer is deemed to have accepted the Products unless written notice of rejection is given within a reasonable time, which is agreed to be within three (3) business days after receipt. Failure to make such claim within the stated period shall constitute irrevocable acceptance and an admission that the goods fully comply with terms, conditions and specifications. (2) Claims of late delivery are barred unless made prior to receipt of Products and the receipt of any Products shall constitute a waiver of any claim that they were received late. (3) No return of Products will be accepted by Seller without a Return Material Authorization number (RMA#), which will be issued at Seller s sole discretion. Returned Products should be in original shipping cartons and be complete with all packing materials. A complete description regarding the nature of the returned goods must be included with all returned Products. (4) Custom programmed or custom printed cards or tags are not returnable. Stock items returned for credit must be pre-approved by Seller and must be assigned a return material authorization number. These Products must be in their original packaging. D. Delivery and Title. Subject to Seller s right of stoppage in transit, delivery of the Products to a carrier shall constitute delivery to Buyer, and risk of loss shall thereupon pass to Buyer, however title shall remain with Seller until Buyer makes payment in full under the contract. Products invoiced and held by Seller for any reason shall be at Buyer s risk and expense. Delivery route shall be at the discretion of Seller unless specifically designated by Buyer. E. Price Fluctuations and Product Specifications. Prices quoted are in effect for thirty (30) days from date of quotation after which time they are subject to labor and/or material cost fluctuations. Prices and product specifications are subject to change without notice. F. Governing Law. This sale shall be governed by the laws of the State of California. G. Taxes/Freight. Unless otherwise agreed in writing, the amount of all transportation charges from Seller s location and all taxes or other charges now or hereafter imposed by any governmental authority upon the sale, purchase, resale, delivery, manufacture, production or possession of the Products specified herein, which may be paid by Seller or for which Seller is liable, shall be paid to Seller by Buyer in addition to the purchase price of the Products. H. Payment of Invoices. When Secura Key grants an open account, payment is due within the terms set for the account. If payment is not received within that term, a finance charge of 1.5% per month will be assessed on the unpaid delinquent balance. In the event payment is not made in a timely manner and additional orders are received or are in process, Secura Key may place the account on hold pending receipt of all amounts due. I. Advice. If technical advice is offered or given in connection with the use of any Products it will be given as an accommodation to Buyer and without charge and Seller shall have no responsibilities or liabilities whatsoever for the content or use of such advice. J. Installation/Training. Buyer acknowledges that no installation, training or contracted education is contracted for or purchased under the terms of this contract unless specifically agreed in writing. In the event that Buyer receives any training from Seller with respect to the Products, then, in that event, such training is personal to the person receiving such training, and Buyer acknowledges that any person receiving such training may not be capable of operating the Products. K. General. (1) This contract contains the entire agreement between the parties and supercedes any prior or contemporaneous oral or written agreements or communications between them relating to the subject matter hereof. (2) This contract may not be assigned, modified or cancelled without Seller s prior written consent, and any attempt to assign, modify or cancel it without such consent shall be absolutely void (3) No delay or omission to exercise any right, power or remedy accruing to Seller upon breach or default by Buyer under this contract shall impair any such right, power or remedy of Seller, or shall be construed as a waiver of any such breach or default. All waivers must be in writing. (4) In the event any of the provisions hereof shall, for any reason, be held void or unenforceable, the remaining provisions shall remain in full force and effect and shall control. (5) Any provisions of this contract prohibited by the law of any state shall, as to said state, be ineffective to the extent of such prohibition without invalidating the remaining provisions of this contract. (6) It is agreed that in the event of a dispute between the parties, for any reason connected with the purchase of the items mentioned in this contract, or in any way related thereto, the parties agree to submit the controversy for decision to the American Arbitration Association to the office located in Los Angeles County, CA.

11 LIST PRICES 2015 MODEL # PRICE MODEL # PRICE MODEL # PRICE 26SASM SASMP 1, D DTK-CR DTK-XR E eaccess1 1, eaccess2 1, eaccess3 1, eaccess4 1, eaccess5 1, eaccess6 1, ET4-WXM ET4-WXS ET8-RO-W-D-W ET8-RO-W-D-I ET8-RO-W-M ET8-SR-X-M ET8-SR-X-D-I ET8-SR-X-D-W ET9-RO-W-MR ETAT ETCI ETCI04-PK ETCI Options for ETCI04 Cards: SLOT, PORTRAIT/ 0.24 LANDSCAPE PHOTO FLAP 1.55 MAG STRIPE 0.48 BARCODE 0.33 SIGNATURE PANEL 0.24 ETKT ETKT Options for ETKT03 Keytags EYELET 0.63 BARCODE 0.33 ETST ETST03-PK ETST Options for ETST03 Keytags BARCODE 0.33 F FMA G GRAPHIC-SETUP N NETCONV NETCONVP P PD PDC PDC PDC200 1, PDC250 1, PDC300 1, PDC500 2, PDC1000 3, PMA R RK-BB RK RK600E RK-600T RK-65K RK-65KS RK65KS-KIT RKAR RKAT RKCI RKCI RKCIH RKCI Options for RKCI01/02 Cards: SLOT, PORTRAIT/ 0.24 LANDSCAPE PHOTO FLAP 1.55 MAG STRIPE, HICO/LOCO 0.48 BARCODE 0.33 SIGNATURE PANEL 0.24 RKCM RKCM RKCM RKCM RKCMH RKCM-02-PK RKCM RKDT-WM RKDT-WS RKDT-SA-M RKDT-SA-S RKDT-SR-M RKDT-SR-S RK-GM RK-HHP RKKT RKKT O0 RKKT RKKT RKKTH RKKT-02-PK RKKT RK-PS RKWL RKWM RKWS RS-232E S SK028WOGV-FMT SK-028WSM SK-028WSM SK-029WSM SK-029WSM SK-034WSM SK-034WSM SK-034WSM SK-24VDC SK-ACP-CON SK-ACPE-LE SK-ACPE-NE SK-ACPE-PCBA SK-ACP-PS SK-ACP-ENC SK-ADS-VUP9-11/ SK-ADS-VUP9-11/ SK-ADS-VUP9-11/10 1, SK-ADS-VUP9-11/15 2, SK-ADS-VUP10-11/ SK-ADS-VUP10-11/ SK-ADS-VUP10-11/ SK-ADS-VUP10-11/15 1, P-1

12 LIST PRICES 2015 MODEL # PRICE MODEL # PRICE MODEL # PRICE SK-ADS-EXP SK-ADS-EXP SK-ADS-EXP2-10 2, SK-ADS-EXP2-15 4, SK-ADS-EXP5-10 1, SK-ADS-EXP5-15 2, SK-ADS-EXP , SK-BAT SKC SKC SKC SKC SKC SKC SKC SKC Options for SKC-03, -06 Cards: SLOT, PORTRAIT 0.27 PHOTO FLAP 1.71 MAG STRIPE 0.52 BARCODE 0.37 SIGNATURE PANEL 0.28 SK-CK SK-CK SK-CK SK-CLIP 0.63 SK-DCPWR SK-IDL SK-IDPTR-1 1, SK-IDPTR-2 2, SK-IDPTR-3 3, SK-IDPTR-4 6, SK-IDPTR-5 6, SK-IDPTR-6 7, SK-IDPTR-7 9, SK-DF SK-DF SK-RXF SK-DF SK-DF SK-DF SKK SKK SK-KPM SK-KPS SKL-03P SK-LAN SK-LAN-MOD SKLOCK SKMDM SK-MRCP-LE 1, SK-MRCP-NE 1, SK-MRCP-PCBA 1, SK-MRCP-4RKDT-M 2, SK-MRCP-4RKDT-S 2, SK-MRCP-4ET8SR-M 2, SK-MRCP-4ET8SR-S 2, SKNETDM SKNETMLD SK-NET-MLD-UPGRADE SK-NET-MLD-CS2 1, SK-NET-MLD-CS5 1, SK-NET-MLD-CS10 3, SK-NET-MLD-CS15 4, SK-NM SK-NUM 1.20 SKP SK-PLUG SKQUICKCONN SK-SIGSETUP SK-SR SK-TS-CP SK-USB SK-WIO SK-WLS-MOD SK-WLSE-MOD SK-XFRMR ST ST SYSKIT-1 1, SYSKIT-2 1, SYSKIT-3 1, SYSKIT-4 1, SYSKIT-5 1, SYSKIT-6 1, T TS SK-TS W WCCI-10-xxxxxxxx 6.72 WCCI-10-xxxxxxxx WCCI-11-xxxxxxxx 6.34 WCCI-11-xxxxxxxx WCCI-14-xxxxxxxx 7.92 WCCI-14-xxxxxxxx WCCI-16-xxxxxxxx WCCI-16-xxxxxxxx WCCI-20-xxxxxxxx WCCI-20-xxxxxxxx MAG STRIPE 0.49 SLOT, LANDSCAPE 0.25 Parts Wire Harness-28SAP Medeco lock & keys SK-NET manual Connector to 28SAP Cable SK-MDM to SK-LAN Wire Harness-26SA SK-ACP/E Door SK-ACP/E Housing SKNC RS-485 Cable - 28SAP P-2

13 TERMS AND CONDITIONS LIMITED WARRANTY Introduction This Return and Warranty Policy Statement applies to Secura Key manufactured equipment purchased directly from Secura Key. For other manufacturer s products supplied by Secura Key, refer to those manufacturers Warranty Policy for details. If you have acquired Secura Key equipment through a distributor, contact them to return the equipment to the place of purchase. The terms of Secura Key s Return and Warranty Policy have changed significantly for 2015, so please read this document carefully. As all statements herein are subject to change, please check our website at for the latest policy. If you have questions about this policy, contact Secura Key Customer Service (800) Effective date of this policy: January 1, 2015 Secura Key Limited Warranty (United States and Canada) Secura Key products are warranted against defects in materials and assembly for three (3) years. In the event that any Secura Key manufactured product fails to perform as intended during the warranty period, Secura Key will replace the defective product with a new or refurbished product. This is subject to the equipment being installed in accordance with the instructions and used appropriately in suitable conditions. The warranty period begins on the date of shipment from our factory, or if sold through a Distributor, on the date of sale (original receipt or documentation is required). This warranty does not include your cost for taxes, duties, or installation expenses. Warranty claims require a Return Material Authorization (RMA). Simply call our Technical Support Department at for help in evaluating your problem. If no resolution is achieved over the phone, Tech Support will give you a "ticket number", then you can request an RMA Request form, and then complete and submit the form to Secura Key to initiate the Warranty process. Refer to Secura Key s website for a downloadable RMA form. Return of E*TAG AND RADIO KEY READER AND ANY CARD defective products shall be at the discretion of Secura Key. Customer must retain the defective product for a thirty (30) day period following the issuance of the RMA, during which time Secura Key reserves the right to request return of the defective product. Products must be returned if requested, freight prepaid. If requested defective products are not returned within 30 days, the customer account is subject to full cost of the replacement unit. Return of Touchcard and Control Panel defective product is always required, and must be done within 30 days or customer account is subject to full cost of the replacement unit. Warranty Exclusions Products which have failed due to vandalism, willful damage, installation errors, inappropriate electrical loading, mis-use and Acts of God such as lightning, fire, flood, hurricane, etc. Cards that have been modified by third parties after sale in a manner that affects performance of the card. Reader Modules, Code Strips, Tags or Inserts that are embedded into other products - these are covered by a separate warranty check with factory. Products where the serial number has been defaced or removed. Products not manufactured by Secura Key are covered by their own original manufacturers warranty. These include but are not limited to SK-KPM/S (Barantec), NETCONV (B&B Electronics), SK-LAN (Lantronix), SK-MDM (U.S. Robotics), SK-IDPTR-1-7 (Ultra Magicard), SK-BAT (Union Battery), SK-USB (Belkin), DTK-XR/CR (Ditek). Please contact SECURA KEY Customer Service for warranty, repair or replacement instructions. Software all software is provided on an as-is basis without warranty, and it is non-returnable once the packaging is opened. Software media (memory stick or CD-ROM) is warranted against defects for 90 days. Telephone Technical Support will be provided at no charge during normal business hours, and software updates will be available at no charge at Secura Key s sole discretion. Secura Key does not grant any warranty with respect to any Software Program, and no warranties of any kind, whether written or oral, implied or statutory, including warranties of merchantability or fitness for a particular purpose, shall apply. Warranty Limitations THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. SECURA KEY SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. The remedies provided herein are the buyers sole and exclusive remedies. In no event shall Secura Key be liable for damages in excess of the purchase price of the product, for direct, indirect, special, incidental or consequential damages (including loss of profits) arising out of the installation, use, or inability to use such product, or loss resulting from the operation or performance of any third party product or any systems in which a Secura Key product is incorporated, whether based on contract, tort or any other legal theory. Export Warranty (All countries except U.S and Canada) Secura Key products are warranted against defects in materials and workmanship for a period of three (3) years from the date of purchase. Secura Key shall replace products which prove to be defective and are sent to Secura Key freight prepaid within the warranty period. Return freight will be charged to customer. This warranty does not include freight, taxes, duties, or installation expenses. The foregoing warranty shall not apply to defects resulting from abuse, misuse, accident, alteration, neglect, unauthorized repair or installation, and Acts of God, such as lightning, fire, flood, hurricane, etc. Secura Key shall have the right of final determination as to the existence and cause of the defect. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. SECURA KEY SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. The remedies provided herein are the buyers sole and exclusive remedies. In no event shall Secura Key be liable for direct, indirect, special, incidental or consequential damages (including loss of profits), whether based on contract, tort or any other legal theory. Warranty replacements Subject to the terms of the limited warranty in effect at the time of purchase, Secura Key will replace a product that fails to operate as intended within the product s warranty period. Products will be replaced with new or reconditioned products at Secura Key s sole discretion. For all warranty replacements, Secura Key will ship replacement equipment via UPS Ground at no additional charge. If you request expedited return shipping, we will charge for the shipping cost. In most cases, E*TAG AND RADIO KEY READER AND CARD defective products will be replaced as soon as the RMA is acknowledged, subject to standard lead times. Return of the defective products may be required at Secura Key s sole discretion within 30 days of the RMA, so the customer must retain the defective product for 30 days.

14 TERMS AND CONDITIONS LIMITED WARRANTY Touchcard and Control Panel defective product must be returned to the factory within 30 days of the issuance of the RMA, or the customer account will be charged the full cost of the replacement product. If Secura Key agrees to replace a defective product under the terms of this warranty, no extension of the original warranty period will occur. Non-warranty replacements have been discontinued as of July Credit returns At its sole discretion, Secura Key will issue the Customer a credit equal to the purchase price, minus a fifteen percent (15%) restocking charge, for all Secura Key approved returns for Standard Products (excluding Software Products). Standard Products may only be returned for credit within 90 days of the date of purchase from Secura Key. The Standard Product must be new and in complete original factory packaging with the unbroken original seal. Credit will not be issued for damaged, shop worn or previously installed Standard Products, or for Standard Products which have missing parts or which have defaced or damaged packaging. Freight to Secura Key s facility will be at Customer s expense. No Custom Products (including, without limitation, custom cards, standard cards, tags, keys, or transponders that have been programmed, encoded or marked to customer specifications, or custom-built readers with customer-specified hardware or firmware) can be returned to Secura Key for credit for any reason other than for a warranted Product defect. Procedures For Replacement or Return of SECURA KEY products Before you can return any product to Secura Key and/or obtain a warranty replacement, you must request a return material authorization (RMA) number. This applies to all product returns, including: Warranty repair/replacements Credit returns. To obtain an RMA 1. Contact Secura Key Technical Support at Tech Support will help you to correct the problem or quickly confirm that the product is defective. Tech Support will issue a Ticket Number (not the same as an RMA Number) which must be included on the RMA form (This is not necessary for credit returns). If the product is defective, you will need to submit an RMA Request Form to receive an RMA number. (Our RMA department will gladly assist you with this process contact them at rma@securakey.com.) You MUST have an account with Secura Key to obtain an RMA. If you purchased the product through a Dealer or Distributor, it must be returned through the Dealer or Distributor. 2. Submit the RMA Request Form to Secura Key RMA Department. We can fax or a copy of the blank form to you, or you may obtain a downloadable form from the Secura Key website (click on Support, Sales & Service, RMA Policy). To complete the RMA Request form you will need the following information: Ticket Number from Tech Support Original Invoice Number and/or Product Serial Number Model number or part number Reason the product is being returned 3. We will fax or the RMA acknowledgment form to you, which confirms your request and provides you with an RMA Number. 4. If you need to return product(s) to Secura Key under an RMA: a) Repackage the product appropriately to cushion and protect the product from damage, and include a copy of the RMA acknowledgement form. Print the RMA Number on the outside of the package. Packages received without the RMA number written on the outside of the package may be refused and returned to you at your expense. b) Send the product to Secura Key RMA Department, Nordhoff St., Chatsworth, CA c) All products must be returned freight prepaid within 30 days of obtaining an RMA. We will not accept unauthorized returns or freight collect returns; we will return these to you at your expense. If a returned product contains parts that are no longer available or repairable, we will contact you to discuss resolution and return of the material. If the customer returns defective products to Secura Key and those products are replaced, credit is issued, or the products are determined to be unrepairable, those products will become the property of Secura Key.