Copyright Information. Trademark Information. General Notice

Transcription

1

2 Copyright Information Copyright 009 by LAUNCH TECH. CO., LTD. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of LAUNCH. The information contained herein is compiled only for the use of LAUNCH branch companies/dealers/marketing personnel/after-sales service personnel. LAUNCH is not responsible for any use of this information as applied to other units. Neither LAUNCH nor its affiliates shall be liable to the purchaser of this unit or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure to strictly comply with LAUNCH operating and maintenance instructions. LAUNCH shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original LAUNCH Products or LAUNCH Approved Products. Trademark Information EN LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (also called LAUNCH for short) in China and other countries. All other LAUNCH trademarks, service marks, domain names, logos, and company names referred to in this manual are either trademarks, registered trademarks, service marks, domain names, logos, company names of or are otherwise the property of LAUNCH or its affiliates. In countries where any of the LAUNCH trademarks, service marks, domain names, logos and company names are not registered, LAUNCH claims other rights associated with unregistered trademarks, service marks, domain names, logos, and company names. Other products or company names referred to in this manual may be trademarks of their respective owners. You may not use any trademarks, service marks, domain names, logos, or company names of LAUNCH or any third party without permission from the owner of the applicable trademarks, service marks, domain names, logos, or company names. You may contact LAUNCH by visiting the website at www. cnlaunch.com, or writing to LAUNCH TECH. CO., LTD., Launch Industrial Park, North of Wuhe Rd., Banxuegang, Longgang, Shenzhen, Guangdong, P. R. China, to request written permission to use Materials on this manual for purposes or for all other questions relating to this manual. General Notice Other product names used herein are for identification purposes only and may be trademarks of their respective owners. LAUNCH disclaims any and all rights in those marks. There is a possibility that this unit is inapplicable to some of the vehicle models or systems listed in the diagnostic section due to different countries, areas, and/or years. Do not hesitate to contact LAUNCH if you come across such questions. We are to help you solve the problem as soon as possible. i

3 Table of Contents. Brief Introduction.... GDS Configuration Components GDS Main Unit Parts GDS Main Unit Structure Exploded Diagram GDS Scopebox (optional) Structure Exploded Diagram GDS Sensorbox (optional) Structure Exploded Diagram GDS Batterybox (optional) Structure Exploded Diagram... 3 ii

4 . Brief Introduction This manual mainly introduces GDS configuration assembly, main unit parts list and parts list which include the items of ERP Code, Name, Qty. and Picture. The manual is provided only for LAUNCH agencies and dealers in order to enable them correctly deal with the management affairs about sales, aftersales service and product parts, etc.. GDS Configuration Components Table - shown as below contains a detailed list of GDS configuration assembly. No. ERP Code Name Qty. Picture EN 0077 GDS main unit GDS scopebox (optional, see Table - for detailed accessory checklist) GDS sensorbox (optional, see Table -3 for detailed accessory checklist) GDS batterybox (optional, see Table - for detailed accessory checklist) Diagnostic cable 6 Y03005 OBD II-6 extension cable CPDA stylus 8 Y Converting cable for diagnostic Switch power supply Power adaptor Y0300 Cigarette lighter cable

5 Thermal printing paper 3 Non-6PIN diagnositc (optional, see table -5) Table - shown as below contains a detailed list of GDS scopebox accessories. No. ERP Code Name Qty. Picture way universal guide line for -channel oscilloscope, TA way universal guide line for -channel oscilloscope, TA way universal guide line for -channel oscilloscope, TA Multimeter probe (black) Multimeter probe (red) Crocodile clips for -channel Oscilloscope (black) Crocodile clips for -channel Oscilloscope (red) Direct ignition extension cord Pin suite 0 Y03005 Double clip power cord Secondary pickup cable for -channel oscilloscope HT30 test leads HT0 attenuators 0008 Power adaptor

6 Table -3 shown as below contains a detailed list of GDS sensorbox accessories. No. ERP Code Name Qty. Picture Y03003 Electric control converting cable Y Y03005 Y03006 Electric control converting cable Electric control converting cable3 Electric control converting cable Sensor probe EN 6 Y03005 Double clip power cord Power adaptor 8 Y Sensor test cable (red) 9 Y Sensor test cable (black) Table - shown as below contains a detailed list of GDS batterybox accessories. No. ERP Code Name Qty. Picture USB data cable Y GDS battery clips 3

7 Table -5 formulates and summarizes a detailed list of optional non-6pin s. No. ERP Code Name Qty. Picture TOYOTA-7 Diagnostic TOYOTA- Diagnostic Mitsubishi-+6, Hyundai- +6 Y NISSAN-+6 Diagnostic HONDA-3 Diagnostic MAZDA-7 Diagnostic KIA-0 Diagnostic BENZ-38 Diagnostic 9 Y03003 BMW-0 Diagnostic GM/VAZ- Test Y FORD-6+ Diagnostic Chrysler-6 Diagnostic SUBARU-9 Diagnostic

8 Daewoo- Diagnostic 5 Y03007 Universal-3 Diagnostic (cable type) 6 Y FIAT-3 Diagnostic (cable type) 7 Y AUDI- Diagnostic (cable type) 8 Y03005 Ssangyong- Diagnostic (cable type) EN Ssangyong-0 Diagnostic 0 Y03007 BENZ- Diagnostic (cable type) 5

9 3. GDS Main Unit Parts 3. GDS Main Unit Structure Exploded Diagram Table 3- GDS Main unit Components Fig. 3- Main Unit Exploded View (Rear section) (Note: No.- in the following form are corresponding to Fig. 3-.) No. ERP Code Name Qty Black silica gel stopper for screws Left lower side housing Cross recessed pan head screws, M3* Diagnostic cable Red silica gel stopper for screws CPDA stylus Left upper side housing Dustproof mesh 85*7mm Cable box Cross recessed countersunk head screws, ST.6* Rear rolling screen 6

10 EN Fig. 3- Main Unit Exploded View (Central section) 7

11 Table 3- GDS Main unit Components (Note: No.-33 in the following form are corresponding to Fig. 3-.) No. ERP Code Name Qty Cross recessed pan head tapping screws, ST.9* M3 aluminium nut,*8*.5mm 0008 Bottom enclosure Dustproof mesh 55*0mm Printer PCA board Thermal printing paper Printer cover Printer cover pressboard Handle shaft Handle Buzzer Hold-down bar for securing LCD 0008 Battery " LCD Main unit PCA board Diagnostic power PCA board Thermal printer core Cross recessed pan head tapping screws, ST.* Printer bearing Cross recessed countersunk head screws, M* Side plate for main unit Side rolling screen 8

12 EN Fig. 3-3 Main Unit Exploded View 3 (Front section) Table 3-3 GDS Main unit Components (Note: No.3-3 in the following form are corresponding to Fig. 3-.) No. ERP Code Name Qty Front rolling screen Upper enclosure LCD Sponge (short) LCD Sponge (long) Power button Diagnostic PCA board Cross recessed pan head tapping screws, ST.5* Right upper side housing (black) Right lower side housing (red) Cover plate 9

13 Table 3- GDS Main unit Components (Others) No. ERP Code Name Qty Kingston memory bank SanDisk hard disc WiFi antenna WiFi module pin electrical wire pin electrical wire (for connecting P3 on the printer PCA to mainboard) pin electrical wire pin electrical wire pin electrical wire pin electrical wire (for connecting J3 on the power board to diagnostic PCA board) pin electrical wire (for connecting J on the power board to diagnostic PCA board) 0

14 3. GDS Scopebox (optional) Structure Exploded Diagram EN Fig. 3- GDS Scopebox Exploded View Table 3-5 GDS Scopebox Components (Note: No.-5 in the following form are corresponding to Fig. 3-.) No. ERP Code Name Qty Handle Handle shaft Upper enclosure 0095 Acrylic Left side enclosure (red) M3 aluminium nut,*8*.5mm Scopebox PCA board Cross recessed pan head screws, M3* Long embedded panel Right side enclosure (red) 0057 Red silica gel stopper for screws Cross recessed pan head tapping screws, ST.9* Lower enclosure Short embedded panel Long embedded panel

15 3.3 GDS Sensorbox (optional) Structure Exploded Diagram Fig. 3-5 GDS Sensorbox Exploded View Table 3-6 GDS Sensorbox Components (Note: No.-5 in the following form are corresponding to Fig. 3-5.) No. ERP Code Name Qty Handle Handle shaft Upper enclosure 0096 Acrylic Left side enclosure (red) M3 aluminium nut,*8*.5mm Sensorbox PCA board Cross recessed pan head screws, M3* Long embedded panel Right side enclosure (red) 0057 Red silica gel stopper for screws Cross recessed pan head tapping screws, ST.9* Lower enclosure Short embedded panel NCP long embedded panel

16 3. GDS Batterybox (optional) Structure Exploded Diagram EN Fig. 3-6 GDS Batterybox Exploded View Table 3-7 GDS Batterybox Components (Note: No.-6 in the following form are corresponding to Fig. 3-6.) No. ERP Code Name Qty Handle Handle shaft Upper enclosure Acrylic Left side enclosure (red) M3 aluminium nut,*8*.5mm NCP long embedded panel Batterybox PCA board Cross recessed pan head screws, M3* Long embedded panel Right side enclosure (red) 0057 Red silica gel stopper for screws Cross recessed pan head tapping screws Lower enclosure Short embedded panel Rubber cover 3