LTC 8600 Series Allegiant Matrix/Control Systems - Modular

Transcription

1 Video 86 Series Allegiant Matrix/Control Systems - Modlar 86 Series Allegiant Matrix/Control Systems - Modlar Camera by 16 monitor switching Modlar constrction Powerfl alarm handling capabilities SalvoSwitching and SatelliteSwitch capability PC-based software package available The 86 Series Allegiant video switcher/control systems combine both switching and compter technology to provide powerfl performance and niqe system featres for the secrity ser. Offering fll matrix switching capability, these systems can be programmed to display the video from any camera on any monitor, either manally or via independent atomatic switching seqences. Fnctions General Constrction The 86 Series provide versatile modlar constrction accommodating p to 128 camera inpts, 16 monitor otpts, 16 keyboards, 512 alarm points, a compter interface port, and a logging printer port. Seqencing Capabilities These systems can be programmed with p to 6 seqences which can be rn independently of each other in either a forward or reverse direction. Any of the seqences can tilize the SalvoSwitching capability where any nmber of system monitors may be selected to switch as a grop. Using the optional 859/ master control software package, seqences can be made to activate and deactivate atomatically based pon the time of day and the day of week. Camera Control The 86 Series spport variable speed operation and fll programming access for AtoDome and AtoDome Easy II Series cameras. In addition, on-site receiver/drivers are available to provide operator control of pan, tilt, zoom, pre-positions, axiliaries, ato-pan, and random scan fnctions when sed with conventional pan/tilt devices. An integral local test fnction is also a standard featre. The 86 Series inclde an impressive ser-based priority system and a series of programmable lockot tables to limit operator access of remotely controlled devices. Operators can restrict control from lower priority operators either manally or atomatically. When enabled to operate atomatically, a bilt-in timeot period is ser programmable. Bilinx Capability When combined with an 816 Allegiant Bilinx Data Interface nit, these switcher/controllers spport operations sing Bilinx commnication. With Bilinx, PTZ control is accomplished sing a bidirectional

2 2 86 Series Allegiant Matrix/Control Systems - Modlar commnication protocol embedded in the video signal of Bosch Dinion, AtoDome, and AtoDome Easy II CCTV cameras. In addition, Bilinx ses the standard video cable to transmit alarm and stats messages from the cameras, providing sperior performance withot the need for separate data transmission cables. Alarm Capabilities With the addition of the 854/ Series alarm interface accessory nits, an external contact closre or logic level can be sed to atomatically activate any camera to be displayed. Any monitor or grop of monitors can be set to display cameras nder alarm conditions. The base system contains three bilt in alarm response modes: basic, ato-bild, and seqence and display. In addition to these three modes, the PC based software packages now incldes the ability to combine any or all of the three standard modes within the same system. Alarm video may be selected to reset either manally or atomatically. In addition, a 16-character alarm title can be selected to appear instead of the camera title dring alarm conditions. Programming/Software Capabilities The 86 Series incldes a black otlined 48- character on-screen display for time-date, camera nmber, camera ID (16-characters), an icon to identify controllable cameras, and monitor (12-characters) or stats information. A ser selectable option provides the ability to display a third line of on-screen text. This third line can be configred to display p to 24 additional camera title characters (4 characters total) or a 12-character monitor title. The on-screen display is also ser selectable to operate in "6-digit Camera ID" mode. When enabled, 2- digit "site nmbers" are displayed in addition to the 4- digit camera nmber. The 2-digit site nmber featre is especially sefl when grops of cameras are located in separate bildings, floors, or other common areas. Over 1 characters are available when programming camera ID and monitor titles. Utilizing a standard Windows -based PC and the optional 859/ Master Control Software package, enhanced programming and switching featres can be obtained. A ser-friendly spreadsheet format provides the ability to enter camera titles, operator names, 64 timed events, change system parameters, program camera seqences, install lockots, and access the advanced alarm handling screens with speed and efficiency. The programmed information may then be transferred into the Allegiant system, stored on disk, or printed ot directly from a printer connected to the PC. The 86 Series contain a logging printer otpt port. This RS-232 serial interface can be connected to the serial port of a PC to provide a permanent record of system stats showing time and date of changes sch as: incoming alarms, acknowledgment of alarms, loading of seqences, ser log-on to keyboard, transfer of system tables and seqences, video loss messages, and a power p reset message. In addition, lists of the system's configration tables and seqences can be sent to the printer port. The 86 system provides powerfl macro capabilities. The macros can be activated sing Allegiant Series system keyboards, system time event fnctions, and alarm activations. Expansion Capabilities The 86 Series can serve as the Master Switcher in a SatelliteSwitch configration. This innovative SatelliteSwitch featre enables a single 86 Series system to commnicate with remotely located "Satellite" systems. Any Allegiant system model can serve as a master or remote Satellite switcher. This powerfl featre permits the design of a distribted matrix video switching system with control at one central location and individal control at the local sites. The main control site can view/control local cameras pls cameras located at any of the remotely distribted Satellite sites. The Satellite sites can view/ control only cameras associated with their own site. When sed in this type of configration, the main 86 Series system can access p to 124 cameras located anywhere in the system. By combining mltiple Satellite systems of this type, matrix sizes of 124 cameras by 16 monitors can be designed in an extremely reliable, "Distribted Processing" configration. Certifications and approvals Electromagneti c Compatibility (EMC) ct Safety Region Complies with FCC Part 15, ICES-3, and CE reglations. This prodct also complies with EN railway application standards. Refer to website for link to applicable docments. Complies with CE reglations, UL, CSA, EN, and IEC Standards Certification Erope CE 861, 881, 882)

3 3 86 Series Allegiant Matrix/Control Systems - Modlar Installation/configration notes / 8834/ Series Configration Diagram (128 Cameras by 16 itors) 1 Video Coax 2 Up to 64 Maximm Video Inpts 3 Additional System Cameras 4 Inpt Cards (max. 8) 5 Otpt Cards (max. 4) 6 CPU-Modle 7 Power Spply Modle / m (1 ft) Interconnect Cable Spplied with Keyboard 9 8 itor Otpt Capability Fll Matrix itor Otpts Maximm, 16 Fll Fnction Keyboard Maximm itor Otpts 14 Pan/Tilt/Zoom and Satellite Control Data 2 Alarm Interface Unit 15 itor Otpts Used As Video Trnk Lines to Main Control Site 3 Pan/Tilt/Zoom and Satellite Control Data 16 Video Trnk Lines From Other Satellite Locations 4 Allegiant Main CPU Bay 17 Any Model Allegiant Main Bay 5 Inpts Used for Both Local and Trnk Lines 18 Local itors 6 Local Camera Video Inpts 19 Satellite Data Line 7 Alarm Inpts May Activate Either Local or Satellite Video on Main Control Center's itor 2 Console Port Inpt 8 Signal Distribtion Unit 21 Data Converter Units 9 To Any Local PTZ Camera Sites 1 Up to 1.5 km (5 ft) Using 1 mm 2 (18 AWG) Shielded Twisted Pair (Belden 876 or Eqivalent) 11 Allegiant Keyboard controls any local or remote camera on any local monitor (Video and PTZ) 12 Mltiple Video Trnk Lines From Each Remote Satellite Location 13 One Line to Each Remote Satellite System Location Technical specifications 22 To Any Local PTZ Camera Sites 23 Code Merger Unit 24 Alarm Interface Unit 25 Local PTZ Control Data Line 86 Series System Specifications 26 Allegiant Keyboard controls any local or remote camera on any local monitor (Video and PTZ) 27 Alarm Inpts Activate Only Local Video on Local itors Capacities Video Inpts Standard: 128 Satellite configration: Video Otpts 16 Keyboards 16 Alarm Inpts 512 Receiver/Drivers Standard: 128 Satellite configration: 124 Allegiant Satellite Switching System

4 4 86 Series Allegiant Matrix/Control Systems - Modlar Electrical Video Bandwidth (-3 db) Differential Gain Differential Phase K Factor.5% Signal-to-Noise Ratio Crosstalk (Inpt to Inpt Isolation) Feedthrogh (Inpt to Otpt Isolation) Gain Tilt Transient Protection (VIM Cards) Environmental Temperatre Altitde 12 MHz typical 1% maximm 2 maximm 7 db minimm 5 db typical 45 db typical Unity ± 2% (into 75 Ohm termination) 1% typical 35 W Peak Plse Power (tp = 8/2 µs) Operating 4 C to 5 C (4 F to 122 F) Storage 4 C to 6 C ( 4 F to 14 F) Hmidity Vibration 45 m (15, ft) % to 95% relative, non-condensing 3 g swept sine wave, 15 Hz to 2 Hz Video Connections 97 to 128 Looping Video Connections External Accessory Interfaces Connectors CONSOLE ALARM PRINTER SDA COM PORT 1 COM PORT 2 KEYBOARDS Two (2), 34-pin ribbon connectors sed in conjnction with the 888/ video interconnect panel Eight (8), 34-pin ribbon connectors sed in conjnction with the 888/ video interconnect panel 9-pin D-type RS-232 port for external PC or control interface (Defalt = 19.2 k bad) 9-pin D-type RS-232 port for Allegiant alarm accessory nit (Defalt = 19.2 k bad) 9-pin D-type RS-232 port for system logging printer (Defalt = 19.2 k bad) 9-pin D-type, TTL level, hi-speed control data otpt (Bi-Phase) for interface to Allegiant series signal distribtion nits (Data clock rate = khz) 9-pin D-type RS-485 port for external Allegiant accessory se 9-pin D-type RS-485 port for external Allegiant accessory se Eight (8), 6-pin RS-485 ports for Allegiant keyboard se Shock 5 g, 11 ms, 1/2 sine wave Eqipment Rack ct Reglatory Compliance 861 Series Eqipment Bay Incldes eqipment rack, 861/1 microprocessor modle, and 885 Series power spply. Power Model No. Rated Voltage Voltage Range Nominal Power 1 861/6 12 VAC, 5/6 Hz 861/ VAC, 5/6 Hz 1. Power at rated voltage flly loaded. Connectors 1 to 14 2 W 198 to W Video Inpts 1 to 96 One (1) sync inpt, and 16 monitor otpts, BNC Size (W x D x H) Constrction/Finish Finish EIA 48 cm (19 in.) rack, 483 x 42 x 267 mm (19 x 16.5 x 1.5 in.) 11.1 kg (24.5 lb) Top and bottom: steel front and sides back: alminm Charcoal Microprocessor Modle ( 861/1) Size (D x H) Power Spply 3 x 25 mm (11.8 x 9.8 in.).5 kg (1.1 lb) ( 885/6 12 VAC, 885/ VAC) Size (W x D x H) 67 x 36 x 247 mm (2.63 x 14.2 x 9.7 in.) 5.2 kg (11.5 lb) Indicators One power On/Off, ten fse alert, and one external sync LED

5 5 86 Series Allegiant Matrix/Control Systems - Modlar 8621/ Camera Inpt Modle Use p to eight (8) per eqipment bay. Camera Inpts 16 Size (D x H) 3 x 25 mm (11.8 x 9.8 in.).41 kg (.9 lb) 8834/ itor Otpt Modle Use p to (4) for per eqipment bay. itor Otpts 4 Size (D x H) 3 x 25 mm (11.8 x 9.8 in.).41 kg (.9 lb) 888/ Video Interconnect Panel The 888/ assembly contains an interconnect panel is sed to convert 32 BNC connectors into two 16-channel ribbon cable connectors. The two 16-condctor ribbon cables ( 889/), designed especially for se with video signals, are sed to interconnect the video between the panel and the 86 Series system. One 888/ assembly is inclded at time of shipment and is reqired for system video inpts 97 to 128. In addition to being sed for video inpts 97 to 128, the 888/ assembly can also be ordered as an option to provide looping capability. One 888/ (incldes panel and two, ribbon cables) is reqired for each grop of 32 cameras. 8621/ Camera Inpt Modle for 861, 16 video inpts per card Order nmber 8621/ 8834/ Video Otpt Modle for 86 and 88, 4 video otpts per card Order nmber 8834/ Accessories 885/5 Spare Power Spply for 861/5 bay, VAC, 5 Hz Order nmber 885/5 885/6 Spare Power Spply for 861/6 bay, 12 VAC, 6 Hz Order nmber 885/6 861/1 Spare CPU Modle for 861 bay Order nmber 861/1 Software Options 859/ Allegiant Master Control Software Order nmber 859/ Finish Size (W x D x H) Charcoal EIA 48 cm (19 in.) rack, 483 x 42 x 44 mm (19 x 1.65 x 1.75 in.) Panel.54 kg (1.2 lb) Ribbon Cables (2).3 kg (.7 lb) Allegiant Accessories The 86 Series accessory prodcts provide many optional featres to the base Allegiant switching systems. Accessory prodcts inclde keyboards, keyboard extension kits, receiver/driver nits, switcher/followers, code merger nits, Allegiant Bilinx Data Interface nit, video ribbon cables, and keyboard expansion nits. All accessory prodcts are designed to be installer-friendly and compatible throghot the Allegiant series systems. See the Allegiant Accessories datasheet. Ordering information 861/5 Allegiant Matrix Switcher p to 128 camera inpts, 16 monitor otpts, incl. single bay, CPU and power spply, 23 VAC, 5 Hz Order nmber 861/5 861/6 Allegiant Matrix Switcher p to 128 camera inpts, 16 monitor otpts, incl. single bay, CPU and power spply, 115 VAC, 6 Hz Order nmber 861/6

6 6 86 Series Allegiant Matrix/Control Systems - Modlar Represented by: Americas: Erope, Middle East, Africa: Asia-Pacific: China: America Latina: Bosch Secrity Systems, Inc. Bosch Secrity Systems B.V. Robert Bosch (SEA) Pte Ltd, Secrity Bosch (Shanghai) Secrity Systems Ltd. Robert Bosch Ltda Secrity Systems Division 13 Perinton Parkway Fairport, New York, 1445, USA Phone: Fax: secrity.sales@s.bosch.com P.O. Box BA Eindhoven, The Netherlands Phone: Fax: emea.secritysystems@bosch.com Systems 11 Bishan Street 21 Singapore Phone: Fax: apr.secritysystems@bosch.com 21 Bilding, No. 333 Fqan Road North IBP Changning District, Shanghai 2335 China Phone Fax: Via Anhangera, Km 98 CEP Campinas, Sao Palo, Brazil Phone: Fax: latam.boschsecrity@bosch.com Bosch Secrity Systems 215 Data sbject to change withot notice en, V2, 4. Feb 215