13.56 MHz Contactless Technology How to Order Guide

Transcription

1 3.56 MHz Contactless Technology How to Order Guide D00529, Release B.8 September 9, 2008 The most current version of this document is always available for download at: To check status on your order, go to: to register This document is subject to change without notice

2 3.56 MHz How to Order Guide D00529, B.8 Contents Overview MHz Reader... 4 iclass Credentials... 8 Basics of Ordering iclass Contactless Smart Credentials... 9 Credentials /20 - iclass Card Ordering Guide /2 - iclass embeddable Card Ordering Guide /22 - Combination Card (iclass / Prox) Ordering Guide /23 - Combination (iclass Prox) embeddable Ordering Guide iclass Wiegand Card Ordering Guide iclass Key Ordering Guide iclass Tag Ordering Guide iclass eunit Ordering Guide iclass Clamshell Card Ordering Guide /440/436/446 MIFARE Card Ordering Guide /44/437/447 Combination (MIFARE /Prox) Card Ordering Guide /444 MIFARE Keyfob Ordering Guide /445 MIFARE Adhesive Tag Ordering Guide /456 DESFire Card Ordering Form Guide /457 Combination (DESFire / PROX) Card Ordering Guide DESFire Keyfob Ordering Guide DESFire Adhesive Tag Ordering Guide FlexSmart to HID Credential Cross Reference Contact Smart Card Request For Quotation Custom Credentials... 3 Artwork Checklist... 3 Electronic Artwork Checklist Anti-Counterfeiting Descriptions Custom Card Artwork Placement and Inkjet Location Guides Tag Credentials Clamshell Cards iclass Readers Read-Only Reader Part Numbers and Options multiclass Read-Only Reader Part Numbers and Options Read/Write Reader Part Numbers and Options iclass/multiclass Transit Reader Part Numbers and Options HADP/OSDP iclass Readers... 4 bioclass Read and Read/Write biometric Reader Part Numbers and Options iclass OEM50 Module Part Numbers and Options iclass OEM75 Module Part Numbers iclass OEM75 Antenna Part Numbers iclass OEM75 Accessory Part Numbers iclass & multiclass OEM 50 Module Part Numbers and Options Expansion Modules for Communication and Proximity Card Support Reader Wiegand Output Configuration Guide Programmer Ordering Guide SmartID Readers... 5 SmartID Single-Technology 3.56MHz Readers Part Numbers and Options GEN SmartTRANS Multi-Technology Readers Part Numbers and Options GEN SmartTOUCH Biometric Readers Part Numbers and Options - GEN SmartTOOLS Card Programming Software and Devices Part Numbers and Options SmartID Single-Technology Reader Part Numbers and Options - GEN SmartTRANS Multi-Technology Reader Part Numbers and Options - GEN SmartID Desktop Reader/Writer Part Numbers and Options - GEN SmartID Reader Cross Reference SmartID Custom Format MIFARE or DESFire Reader Ordering Guide FlexSmart Readers FlexSmart Reader Part Numbers and Options MIFARE Reader Wiegand Output Configuration Custom Format MIFARE or DESFire Reader Ordering Guide... 6 MIFARE Programmer/Developer Kit Ordering Guide Edge Readers Edge Solo Part Numbers and Options Edge Solo Kit Part Numbers and Options MHz Accessories Corporate 000 Format Request & Authorization Form iclass Elite Program Request & Authorization Form September 9, HID Global Corporation. All rights reserved Page 2 of 7

3 3.56 MHz How to Order Guide D00529, B.8 Overview Welcome to 3.56 MHz by HID. HID Global offers a variety of reader families that are compatible with most 3.56 MHz technologies existing in the market today. HID s primary 3.56 MHz product lines include iclass and SmartID. iclass is the first advanced contactless smart card technology designed by and for the access control professional. iclass readers and cards offer your customer the highest quality card and reader system. The access control system is designed to both pass card data to an access control host, and perform read/write functionality in card nonaccess control areas. SmartID is a highly customizable ISO4443 (MIFARE / DESFire ) reader platform enabling the dynamic application fit new and existing populations of custom defined card data structures. Customize authentication keys, communication encryption, data location and length, data output and much more. Making it easy for you to offer your customers exciting new products with enhanced benefits, HID has prepared this 3.56MHz How to Order Guide. This How to Order Guide provides information for: 3.56MHz reader and module products 3.56MHz credentials iclass Reader Identifiers The alpha designator indicates whether the reader is: READ ONLY (R) READ/WRITE (RW) READ ONLY/PROXIMITY (RP) READ ONLY WITH KEYPAD (RK) READ ONLY WITH KEYPAD/PROXIMITY (RPK) READ/WRITE WITH KEYPAD (RWK) SmartID Reader Identifiers The alpha designator indicates whether the reader is: READ ONLY (S) READ ONLY/PROXIMITY (SP) READ ONLY WITH KEYPAD (SK) READ ONLY WITH KEYPAD/PROXIMITY (SPK) The following numeric designator signifies the physical size of the unit. (The smaller the number, the physically smaller the unit.) September 9, HID Global Corporation. All rights reserved Page 3 of 7

4 3.56 MHz How to Order Guide D00529, B MHz Reader iclass Read Only Readers When your application requires the ability to read card numbers and output data using the standard Wiegand or Clock and Data protocols, use a read only (R series) iclass product. R0 - Physically the smallest reader, the R0 is ideal for mullion mounted door installations. The R0 will read HID card formats from iclass cards, or the card serial number (CSN) from a MIFARE card, and delivers the information to an existing access control panel using industry standard Wiegand protocol. R5 - The R5 is ideal for mullion mounted door installations. The R5 will read HID card formats from iclass cards, or the card serial number (CSN) from a MIFARE card. Delivering the information to an existing access control panel, the R5 uses industry standard Wiegand protocol. R30 - This 8.5 cm (3.3 ) square reader is designed to mount to and cover standard EU and APAC back boxes. This reader has the same read only abilities as the R0 with the added features of a longer read range and built-in tamper magnet. R40 - The R40 is designed to mount and cover single gang switch boxes primarily used in the United States and includes a slotted mounting plate for European and Asian back box spacing. It contains all the features of the R30 and offers longer read range. iclass Keypad Readers RK40 - This reader is the same size and shape as the R40. The 2-position weatherproof keypad features vandal-resistant metal keycaps and backlit numbering. The RK40 supports dual authentication of identity by combining card presentation and entry of a PIN. The PIN can be verified either at the access control panel or locally by the keypad reader. When verified locally, the PIN must be programmed into the iclass Card. RKL55 / RWKL550 This LCD/Keypad reader allows for dual-factor authentication in addition to user messages displayed on an LCD screen. The reader is designed to fit on a single gang switch box for US, EU or APAC usage. The reader is available in read only or read/write configuration. iclass Multi-Technology Readers (multiclass) RP5 - The RP5 reader simultaneously supports HID and AWID or Indala proximity, iclass, MIFARE (CSN), and HID multi-technology credentials. The RP5 is ideal for mullion mounted door installations. RP40 - The RP40 reader simultaneously supports HID and AWID or Indala proximity, iclass, MIFARE (CSN), and HID multi-technology credentials. The RP40's mounting plate attaches to US, EU or APAC back boxes with mm screw hole spacing (vertical or horizontal), or to any flat surface. The reader body snaps onto the mounting plate and the cover snaps over the reader body, and then secured with a screw. RPK40 The RPK40 simultaneously supports HID and AWID or Indala proximity, iclass, MIFARE (CSN), and HID multi-technology credentials. Additionally, the RPK40 supports dual factor authentication of identity by combining card presentation and PIN entry. Either verify the PIN at the access control panel or locally by the keypad reader. When verified locally, program the PIN into the iclass Card. The RPK40's mounting plate attaches to US, EU or APAC back boxes with mm screw hole spacing (vertical or horizontal), or to any flat surface. The reader body snaps onto the mounting plate and the cover snaps over the reader body, and then secured with a screw. iclass Biometric Readers (bioclass) RLB57 / RWKLB575 This biometric LCD/Keypad reader allows for three-factor authentication using biometric finger authentication, keypad and card. User messages are displayed on an LCD screen. The reader is designed to fit on a single gang switch box for US, EU or APAC usage. The reader is available in read only or read/write configuration. September 9, HID Global Corporation. All rights reserved Page 4 of 7

5 3.56 MHz How to Order Guide D00529, B.8 iclass Long Range Readers R90 - The R90 is the largest size (2 or 30.5 cm square) and longest read range iclass contactless smart card reader in the iclass product line. The R90 will read HID card formats from iclass cards, or the card serial number (CSN) from a MIFARE card, and delivers the information to an access control panel using industry standard Wiegand protocol. iclass Reader/Writers When your application requires the ability to read and write data to the card, use a read/write (RW series) iclass product. The four standard iclass reader/writers are: RW00 - Physically the smallest reader/writer, the RW00 is ideal for mullion mounted door installations. The RW00 contains all the features of the R0, with the added features of read/write capability via RS232, RS485, UART or USB. RW300 - This 80 mm (3.5 ) square reader is designed to mount to and cover standard EU and APAC back boxes. The RW300 contains all the features of the R30, with the added features of read/write capability via RS232, RS485, UART or USB. RW400 - The RW400 is designed to mount to and cover single gang switch boxes primarily used in the US. The RW400 contains all the features of the R40, with the added features of read/write capability via RS232, RS485, UART or USB. RWK400 - This reader/writer offers the same features as the RK40, with the extended ability to read/write user data to iclass credentials via RS-232, RS485, UART or USB. iclass OEM Modules OEM Modules assist third-party hardware manufacturers with the embedding of iclass technology into their products. Products might include: biometric, cashless vending, secure PC log-on, or alarm keypad arm/disarm. HID offers two distinctly different OEM Modules: OEM 50 - The OEM 50 has a small form factor. This board level product provides no voltage regulation (+5VDC +/-.25) and TTL interfaces for all communications and controls. Additionally, connect the module to several available remote antennas. This allows the embedding manufacturer to place the antenna away from electronics and any other metallic obstruction. OEM 50 - The OEM 50 is a slightly larger board level product that provides full iclass reader functionality. Voltage regulation (+5 and 6VDC), standard Wiegand level outputs, and LED/beeper/hold control lines are just a few of the OEM 50 features. The addition of an OEM 50 expansion module increases functionality at minimal extra cost. Currently available expansion modules convert the OEM 50 module reader into a reader/writer with the following interfaces; TTL, RS232, RS485, and USB. Order the OEM 50 with the expansion module or purchase the expansion module separately for field upgrades. Additionally, the reader can be connected to several remote antennas. This allows the embedding manufacturer to place the antenna away from electronics and any other metallic obstruction. Now GSA is approved for US Government PIVII projects. iclass Programmer The iclass CP400 & CP575A Card Programmers are designed for on-site programming of access control data, PIN codes, and user data onto HID iclass cards. The Card Programmer allows HID proximity formats, keypad PIN codes, and user data fields to be programmed directly into iclass contactless cards. The CP400 Card Programmer includes a desktop reader/writer, personalization diskette, universal power supply, and serial cable. The CP575A Card Programmer includes CP400 features with the added capability of programming biometric templates for use in the bioclass reader and includes a bioclass reader/writer, personalization diskette, universal power supply and USB cable. Ensuring security of the format and cards, required is an iclass Card Programmer license. September 9, HID Global Corporation. All rights reserved Page 5 of 7

6 3.56 MHz How to Order Guide D00529, B.8 SmartID Readers S0 The S0 is ideal for mullion mounted door installations. Reading MIFARE (sector), DESFire (application/file) or PIVII card data, the S0 delivers the card data to an access control system using industry standard protocols, including Wiegand. Mount the reader on a single gang switch box for US, EU or APAC usage by ordering an additional mounting accessory. SmartID Keypad Readers SK0 - The SK0 is ideal for mullion mounted door installations. The SK0 offers dual-factor authentication using keypad and card. Reading MIFARE (sector), DESFire (application/file) or PIVII card data, the SK0 delivers the card data to an access control system using industry standard protocols, including Wiegand. The reader can be mounted on a single gang switch box for US, EU or APAC usage by ordering an additional mounting accessory. SmartID Multi-Technology Readers (SmartTRANS) SP0 - The SP0 is ideal for mullion mounted door installations. The SP0 reads either 25KHz HID Prox and AWID card formats in addition to MIFARE (sector), DESFire (application/file) or PIVII card data. The SP0 delivers the card data to an access control system using industry standard protocols, including Wiegand. Mount the SP0 on a single gang switch box for US, EU or APAC usage by ordering an additional mounting accessory. SPK0 - The SPK0 is ideal for mullion mounted door installations. The SPK0 offers dual-factor authentication using keypad and card. The SPK0 reads either 25KHz HID Prox and AWID card formats in addition to MIFARE (sector), DESFire (application/file) or PIVII card data. The reader will deliver the card data to an access control system using industry standard protocols including Wiegand. Mount the reader on a single gang switch box for US, EU or APAC usage by ordering an additional mounting accessory. SmartID Biometric Readers (SmartTOUCH) SB0 / SBK0 This biometric reader comes with or without keypad and offers three-factor authentication using biometric finger authentication, keypad and card. The reader is designed for a mullion mount, but mount the biometric reader on a single gang switch box for US, EU or APAC usage by ordering an additional mounting accessory. SmartID Reader/Writers SW00 The SW00 is ideal for mullion mounted door installations. Read/Write application supports T=CL (or legacy 3964) bi-directional serial protocol implemented over RS232, RS485 or RS422 physical link. Enables read/write to MIFARE and ISO credentials (DESFire, SmartMX). SWK00 The SWK00 is ideal for mullion mounted door installations. Read/Write application supports T=CL (or legacy 3964) bi-directional serial protocol implemented over RS232, RS485 or RS422 physical link. Enables read/write to MIFARE and ISO credentials (DESFire, SmartMX). SWD00 Desktop reader/writer connects to a computer through a USB or RS232. The hosts send commands to SWD00 in order to read/write data to MIFARE, DESFire and any other ISO card through T=CL (RS232) or PC/SC (USB Only) protocols. SmartID Programmer (SmartTOOLS) SmartTOOLS is a card programming software suite providing custom access cards and configuration card programming of MIFARE cards. ProxBurn is an access card programming component of SmartTOOLS. ProxBurn programs custom MIFARE cards for use on SmartID access control readers. The ProxBurn package includes a CD with software application and manuals, RS232 cable and SWD00 with RS232 interface. ReaderTOOLS is a configuration card programming component of SmartTOOLS. ReaderTOOLS creates configuration cards configuring SmartID readers to perform custom access control applications against existing and new card populations with custom requirements. The ReaderTOOLS package includes a CD with software application and manuals, USB cable and SWD00 with USB interface. September 9, HID Global Corporation. All rights reserved Page 6 of 7

7 3.56 MHz How to Order Guide D00529, B.8 Multiple generations of SmartID readers are available. Both SmartID and SmartTRANS readers are available in the newest generation 2 (GEN 2) form, as well as generation (GEN ) form. Both SmartTOUCH and SmartTOOLS are available in generation (GEN ) only. For SmartID and SmartTRANS, GEN 2 product offers the following added benefit over GEN SmartID and SmartTRANS: Lifetime warranty HID MIFARE compatibility FlexSmart custom format compatibility Increased keypad outputs (same as HID Prox) Increased read range consistency Widened input power supply input Increased HID Prox/AWID compatibility (SmartTRANS only) September 9, HID Global Corporation. All rights reserved Page 7 of 7

8 3.56 MHz How to Order Guide D00529, B.8 iclass Credentials HID offers a full line of iclass credentials. When choosing a credential, there are several important decision points:. Which form factor (i.e., card, key or tag) of credential best meets my needs? 2. Do I have a heavy duty card application or will I be laminating a patch to the card, which will require a composite card for best results? 3. Do I need a multi-technology credential (i.e., iclass and proximity or iclass and Wiegand) to help leverage investments in existing access control systems while transitioning to new technologies or applications? 4. How much memory do I need (i.e. 2k bits, 6k bits or 32k bits)? 5. How many application areas (2 or up to 6) do I need? To help simplify the purchase of iclass credentials, all credentials are delivered pre-personalized with the default memory allocation and protection for the access control application. Within the part number, the numeric model number defines the technology, number of application areas and memory size. All credentials come in two memory sizes, 2k bits (256 Bytes) with two application areas or 6k bits (2k Bytes) with two or sixteen application areas or 32k bits (4k Bytes) in two separate books. Application Area is reserved by HID for access control use. The remaining application areas can be defined. Please review HID Application Note # 28 for more information about memory size and application areas. Credentials are available in several form factors. You may request the correct memory size and/or application area configuration on any form factor. The form factor is not limiting. Offered form factors include: iclass Clamshell cards iclass Clamshell cards offer single-coil, read/write 3.56 MHz contactless smart card technology in a value-priced and highly-durable, molded ABS shell with customizable PVC label. The card is available in the 2K bit (256 byte) memory size only. iclass Cards Standard, 3.56 MHz single-coil, iclass cards will be manufactured to meet ISO standard dimensions. Personalize these cards by adding a photo ID, or barcode (These cards are also available with an optional magnetic stripe). This card is also offered in an embeddable version (iclass embeddable card) to allow an optional contact smart chip module to be added to the card. iclass Prox Cards iclass Prox cards offer a dual technology solution (3.56 MHz contactless smart card technology and 25 khz proximity technology) in a single card. Personalize these cards by adding a photo ID, or barcode (These cards are also available with an optional magnetic stripe). This card is also offered in an embeddable version (iclass Prox embeddable card) to allow an optional contact smart chip module to be added to the card. iclass Wiegand Cards iclass Wiegand cards offer a dual technology solution (3.56 MHz contactless smart card technology and Wiegand strip technology) in a single card. Personalize these cards by adding a photo ID, or barcode (These cards are also available with an optional magnetic stripe). iclass Keys This newly designed hexagonal key is less obtrusive than a card in your pocket or handbag and has all the capabilities of a card or tag. The iclass Key was designed to fit on your existing key ring or used with a standard badge-clip. iclass Tags An adhesive tag can be placed onto an existing credential to allow for an easy transition from legacy technologies to iclass. The tag can also be placed onto any non-metallic object. However, HID recommends that every application be tested before purchase to ensure compatibility. iclass eunit A small iclass coil assembly to add full iclass card read-write functionality to partner products. iclass by HID. A new solution for the access control market that is Smart, Powerful and Trusted. Become acquainted with this technology. You will understand the difference you can make in your customers ability to secure and manage their environments by offering iclass! September 9, HID Global Corporation. All rights reserved Page 8 of 7

9 3.56 MHz How to Order Guide D00529, B.8 Basics of Ordering iclass Contactless Smart Credentials Each part number consists of a base number, to indicate the type of credential, and a number or letter to indicate each credential option. Each credential has a standard part number which includes default options, as indicated on the attached credential guides. When an order is placed for a credential, the base number and all options must be specified. If you require any options that are different from the default options, you must also indicate those options at the time the order is placed. All part numbers must be complete to be accepted by HID s order entry system. All reader orders must have the following information: BASE MODEL NUMBER STYLE READ RANGE TYPE COLOR OUTPUT FORMAT (reader s format or format number must also be given at time of order) All credential orders must have the following information: Base Part Number - Indicates type of credential Standard PVC Composite 40% Polyester/PVC (Recommended for long life applications or when applying an over-laminate) Memory Size and Allocation - 0 2k Bits (256 Bytes) with 2 Application Areas 6k Bits (2k Bytes) with 2 Application Areas 2 6k Bits (2k Bytes) with 6 Application Areas 3-32k Bits (4K Bytes) Application areas 6k/2+6k/ 4-32k Bits (4K Bytes) Application areas 6k/6+6k/ Programming - Indicates whether the credential is programmed at the factory by HID or programmed by you with an HID iclass card programmer. If the credential is ordered non-programmed, an HID iclass card programmer must be used for programming. (Contact an HID sales representative for iclass card programmer eligibility). Front Packaging - Indicates standard or custom artwork and type of finish. Back Packaging - Indicates standard or custom artwork and type of finish. iclass Credential Numbering - Internal 3.56 MHz programmed number and visible external credential number. Slot Punch Optional 25 khz Proximity or Wiegand Credential Numbering - Internal 25 khz Proximity or Wiegand programmed number and visible external credential number. All orders for custom artwork credentials must have the following information: Custom Artwork Number (Call your Customer Service Representative if number is not available) In addition, all credential orders must have the following programming information: Bit Format(s) Facility Code(s) Internal and External Start Numbers Internal PIN Code (Length: 2 2 Digits) Any Special Instructions September 9, HID Global Corporation. All rights reserved Page 9 of 7

10 3.56 MHz How to Order Guide D00529, B.8 Credentials 200/20 - iclass Card Ordering Guide The iclass contactless smart card offers read/write capability. Personalize the card with a photo ID, magnetic stripe, barcode, or anti-counterfeiting element. Please ensure each required option has been checked with the appropriate choice to fulfill a completed order form. Base Model 200 Standard PVC 20 Composite 40% Polyester / PVC* iclass Memory Size and Allocation (Check One) 0-2k Bits (256 Bytes) with 2 Application Areas 3-32k Bits (4K Bytes) Application areas 6k/2+6k/ - 6k Bits (2k Bytes) with 2 Application Areas 4-32k Bits (4K Bytes) Application areas 6k/6+6k/ 2-6k Bits (2k Bytes) with 6 Application Areas Programming (Check One) C - Configured, Non-Programmed iclass. Programming Information Not Required. P - Programmed iclass. Specify Programming Information. Front Packaging (Check One) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish Specify Custom Artwork Number Back Packaging (Check One) G - Plain White with Gloss Finish 2 Front Packaging C - Custom Artwork with Gloss Finish Specify Custom Artwork Number - Plain White with Gloss Finish with Magnetic Stripe Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number Card Numbering 3 (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) A - Sequential Matching Internal/External (Laser Engraved) 4 B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4 C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4 Slot Punch 5 (Check One) N - No Slot Punch (Printed location of vertical slot punch will remain) B - No Slot Punch (Printed location of Horizontal slot punch will remain) V - Vertical Slot Punch H - Horizontal Slot Punch Back Packaging 2345 = Card ID Number YYYYYYYY-YY = Sales Order Number Option - Custom Artwork (Specify Artwork Number Refer to the Custom Artwork Forms for new artwork) Please enter your final card options from check boxes above. Example: 200CGGNN Final Part Number - (Options #) iclass Card Programming Information Bit Numbers. (example: 26 bit) Format Number (example: H030) Facility Code. (Custom Formats) Site Code. City Code. OEM Code. Internal Card # Start. Stop. External Card # Start. Stop. PIN (2-2 digits) : Sequential: Start # Random: Length. Special Instructions:. For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is placed in the bottom right-hand corner on the back of the card. 4 For Laser Engraved external numbers, consult factory for lead times and cost. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. * The composite construction is recommended for all cards with overlaminate applied. Please consult with the printer manufacturer prior to ordering. September 9, HID Global Corporation. All rights reserved Page 0 of 7

11 3.56 MHz How to Order Guide D00529, B.8 20/2 - iclass embeddable Card Ordering Guide The iclass embeddable contactless smart card offers read/write capability. Personalize the card with a contact smart chip module, photo ID, magnetic stripe, barcode, or anti-counterfeiting element. Please ensure each required option has been checked with the appropriate choice to fulfill a completed order form. Base Model 20 Standard PVC 2 Composite 40% Polyester / PVC * iclass Memory Size and Allocation (Check One) 0-2k Bits (256 Bytes) with 2 Application Areas - 6k Bits (2k Bytes) with 2 Application Areas 2-6k Bits (2k Bytes) with 6 Application Areas Programming (Check One) C - Configured, Non-Programmed iclass. Programming Information Not Required. P - Programmed iclass. Specify Programming Information. Front Packaging (Check One) G - Plain White with Gloss Finish C - Custom Artwork/Contact Module with Gloss Finish Specify Custom Artwork/Contact Module Number Back Packaging (Check One) G - Plain White with Gloss Finish 2 C - Custom Artwork with Gloss Finish Specify Custom Artwork Number - Plain White with Gloss Finish with Magnetic Stripe Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number 2345 = Card ID Number YYYYYYYY-YY = Sales Order Number 3-32k Bits (4K Bytes) Application areas 6k/2+6k/ 4-32k Bits (4K Bytes) Application areas 6k/6+6k/ Back Packaging Front Packaging Card Numbering 3 (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) A - Sequential Matching Internal/External (Laser Engraved) 4 B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4 C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4 Slot Punch 5 (Check One) N - No Slot Punch (Printed location of vertical slot punch will remain) V - Vertical Slot Punch Chip Type Operating System Chip Capacity Option - Contact Smart Chip Module (Check One) Memory Microprocessor Java.NET 28K 72K 64K 32K 608W Gemalto Axalto 28K.NET X X X 608G Gemalto Axalto Cryptoflex e-gate 32K X X 608Y Gemalto Axalto CyberFlex Access 64K v2c (Pegasus) X X X 608X Gemalto Axalto Cyberflex Access e-gate 32K X X X 608Q Gemalto Gemplus GemSafeXpresso 64K X X X 608H Oberthur IDOne Cosmo 64K X X X 608J Infineon Infineon SLE5542 (replaces SLE4442) X 608D NXP SmartMX Java JCOP 4/72 P5CC072 X X C700 Crescendo Refer to Crescendo documentation X X C200 Crescendo Refer to Crescendo documentation X X Option - Custom Artwork (Specify Artwork Number Refer to the Custom Artwork Forms for new Artwork) Please enter your final card options from check boxes above. Example: 20CGGNN Final Part Number - (Options #) iclass Card Programming Information Bit Numbers. (example: 26 bit) Format Number (example: H030) Facility Code. (Custom Formats) Site Code. City Code. OEM Code. Internal Card # Start. Stop. External Card # Start. Stop. PIN (2-2 digits): Sequential: Start # Random: Length. Special Instructions:. For Contact Smart Chip selection, refer to Contact Smart Card Request For Quotation, page 29. Standard configuration does not include a contact smart chip module. For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is placed in the bottom right-hand corner on the back of the card. 4 For Laser Engraved external numbers, consult factory for lead times and cost. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. * The composite construction is recommended for all cards with overlaminate applied. Please consult with the printer manufacturer prior to ordering. September 9, HID Global Corporation. All rights reserved Page of 7

12 3.56 MHz How to Order Guide D00529, B.8 202/22 - Combination Card (iclass / Prox) Ordering Guide The iclass Prox contactless smart card offers read/write and HID proximity capability in a single card. Add new applications while leveraging your investment in existing access control systems. Personalize the card with a photo ID, magnetic stripe, barcode, or anti-counterfeiting element. Please ensure each required option has been checked with the appropriate choice to fulfill a completed order form. Base Model 202 Standard PVC 22 Composite 40% Polyester / PVC * iclass Memory Size and Allocation (Check One) 0-2k Bits (256 Bytes) with 2 Application Areas - 6k Bits (2k Bytes) with 2 Application Areas 2-6k Bits (2k Bytes) with 6 Application Areas 3-32k Bits (4K Bytes) Application areas 6k/2+6k/ Front Packaging 4-32k Bits (4K Bytes) Application areas 6k/6+6k/ iclass Programming (Check One) C - Configured, Non-Programmed iclass & 25 khz Proximity. Programming Information Not Required. A - Configured, Non-Programmed iclass, Programmed 25 khz Proximity. Specify Programming Information. P - Programmed iclass only and Prox configured. Specify Programming Information. B - Programmed 25 khz Proximity and iclass. Specify Programming Information - Front Packaging (Check One) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish Specify Custom Artwork Number 2345 = Card ID Number Back Packaging (Check One) YYYYYYYY-YY = Sales Order Number G - Plain White with Gloss Finish 2 C - Custom Artwork with Gloss Finish Specify Custom Artwork Number - Plain White with Gloss Finish with Magnetic Stripe Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number Back Packaging iclass Card Numbering 3 (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) Slot Punch 5 (Check One) N - No Slot Punch (Printed location of vertical slot punch will remain) V - Vertical Slot Punch 25 khz Card Numbering 3 (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) Option - Custom Artwork (Specify Artwork Number Refer to the Custom Artwork Forms for new artwork) A - Sequential Matching Internal/External (Laser Engraved) 4 B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4 C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4 A - Sequential Matching Internal/External (Laser Engraved) 4 B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4 C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4 Please enter your final card options from check boxes above. Example: 2022LGGNNM Final Part Number - (Options #) iclass Programming Information 25 khz Programming Information Bit Numbers. (example: 26 bit) Bit Numbers. (example: 26 bit) Format Number (example: H030) Format Number (example: H030) Facility Code. Facility Code. (Custom Formats) Site Code. City Code. (Custom Formats) Site Code. City Code. OEM Code. OEM Code. Internal Card No. Start. Stop. Internal Card No. Start. Stop. External Card No. Start. Stop. External Card No. Start. Stop. PIN: Sequential: Start # Random: Length. Special Instructions:. For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is placed in the bottom right-hand corner for iclass 3.56 MHz and in the bottom center for 25 khz Proximity on the back of the card. 4 For Laser Engraved external numbers, consult factory for lead times and cost. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. * The composite construction is recommended for all cards with over-laminate applied. Please consult with the printer manufacturer prior to ordering. September 9, HID Global Corporation. All rights reserved Page 2 of 7

13 3.56 MHz How to Order Guide D00529, B.8 203/23 - Combination (iclass Prox) embeddable Ordering Guide The iclass Prox embeddable contactless smart card offers read/write and HID proximity capability in a single card. Personalize the card with a contact smart chip module, photo ID, magnetic stripe, barcode, or anti-counterfeiting element. Base Model 203 Standard PVC 23 Composite 40% Polyester / PVC * iclass Memory Size and Allocation (Check One) 0-2k Bits (256 Bytes) with 2 Application Areas - 6k Bits (2k Bytes) with 2 Application Areas 2-6k Bits (2k Bytes) with 6 Application Areas Programming (Check One) C - Configured, Non-Programmed iclass & 25 khz Proximity. Programming Information Not Required. A - Configured, Non-Programmed iclass, Programmed 25 khz Proximity. Specify Programming Information. P - Programmed iclass only. Specify Programming Information. Front Packaging (Check One) G - Plain White with Gloss Finish C - Custom Artwork/Contact Module with Gloss Finish Specify Custom Artwork/Contact Module Number Back Packaging (Check One) G - Plain White with Gloss Finish 2 C - Custom Artwork with Gloss Finish Specify Custom Artwork Number - Plain White with Gloss Finish with Magnetic Stripe Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number iclass Card Numbering 3 (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) A - Sequential Matching Internal/External (Laser Engraved) 4 B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4 C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4 Slot Punch 5 (Check One) N - No Slot Punch (Printed location of vertical slot punch will remain) V - Vertical Slot Punch 25 khz Card Numbering 3 (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) A - Sequential Matching Internal/External (Laser Engraved) 4 B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4 C - Random Internal/Non-Matching Sequential External (Laser Engraved) k Bits (4K Bytes) Application areas 6k/2+6k/ 4-32k Bits (4K Bytes) Application areas 6k/6+6k/ B - Programmed 25 khz Proximity and iclass. Specify Programming Information = Card ID Number YYYYYYYY-YY = Sales Order No. Optional Contact Smart Chip Module (Front or Back side) Front Packaging Back Packaging Chip Type Operating System Chip Capacity Option - Contact Smart Chip Module (Check One) Memory Microprocessor Java.NET 28K 72K 64K 32K 608W Gemalto Axalto 28K.NET X X X 608G Gemalto Axalto Cryptoflex e-gate 32K X X 608Y Gemalto Axalto CyberFlex Access 64K v2c (Pegasus) X X X 608X Gemalto Axalto Cyberflex Access e-gate 32K X X X 608Q Gemalto Gemplus GemSafeXpresso 64K X X X 608H Oberthur IDOne Cosmo 64K X X X 608J Infineon Infineon SLE5542 (replaces SLE4442) X 608D NXP SmartMX Java JCOP 4/72 P5CC072 X X C700 Crescendo Refer to Crescendo documentation X X C200 Crescendo Refer to Crescendo documentation X X Option - Custom Artwork (Specify Artwork Number Refer to the Custom Artwork Forms for new Artwork) Please enter your final card options from check boxes above. Example: 2033CGGMNM Final Part Number - (Options #) September 9, HID Global Corporation. All rights reserved Page 3 of 7

14 3.56 MHz How to Order Guide D00529, B.8 iclass Programming Information Bit Numbers. (example: 26 bit) Format Number (example: H030) Facility Code. (Custom Formats) Site Code. City Code. OEM Code. Internal Card No. Start. Stop. External Card No. Start. Stop. PIN: Sequential: Start # Random: Length. 25 khz Programming Information Bit Numbers. (example: 26 bit) Format Number (example: H030) Facility Code. (Custom Formats) Site Code. City Code. OEM Code. Internal Card No. Start. Stop. External Card No. Start. Stop. Special Instructions:. For Contact Smart Chip selection, refer to Contact Smart Card Request For Quotation, page 29. Standard configuration does not include a contact smart chip module. For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is placed in the bottom right-hand corner for iclass 3.56 MHz and in bottom center for 25 khz Proximity on the back of the card. 4 For Laser Engraved external numbers, consult factory for lead times and cost. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. * The composite construction is recommended for all cards with over-laminate applied. Please consult with the printer manufacturer prior to ordering. September 9, HID Global Corporation. All rights reserved Page 4 of 7

15 3.56 MHz How to Order Guide D00529, B iclass Wiegand Card Ordering Guide The iclass Wiegand contactless smart card offers read/write and Wiegand strip capability in a single card. Add new applications and/or use a transition card during upgrades from Wiegand to iclass. Please ensure each required option has been checked with the appropriate choice to fulfill a completed order form. Base Model 204 Standard PVC iclass Memory Size and Allocation (Check One) 0-2k Bits (256 Bytes) with 2 Application Areas - 6k Bits (2k Bytes) with 2 Application Areas 2-6k Bits (2k Bytes) with 6 Application Areas Programming (Check One) C - Configured, Non-Programmed iclass. Programming Information Not Required. P - Programmed iclass. Specify Programming Information. Front Packaging (Check One) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish Specify Custom Artwork Back Packaging (Check One) G - Plain White with Gloss Finish 2 C - Custom Artwork with Gloss Finish Specify Custom Artwork Number - Plain White with Gloss Finish with Magnetic Stripe Custom Artwork with Gloss Finish with Magnetic Stripe Specify Custom Artwork Number iclass Card Numbering 3 (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) A - Sequential Matching Internal/External (Laser Engraved) 4 B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4 C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4 Slot Punch 5 (Check One) N - No Slot Punch (Printed location of vertical slot punch will remain) V - Vertical Slot Punch H - Horizontal Slot Punch Wiegand Card Numbering 3 (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) A - Sequential Matching Internal/External (Laser Engraved) = Card ID Number YYYYYYYY-YY = Sales Order Number 3-32k Bits (4K Bytes) Application areas 6k/2+6k/ 4-32k Bits (4K Bytes) Application areas 6k/6+6k/ Front Packaging Back Packaging B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4 C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4 Wiegand Style & Bit - Number of Bits in Code Strip ( XX = Bit # between 8 and 44) (Check One) XXA - Strip toward left edge of card XXA - Strip toward right edge of card Option - Custom Artwork (Specify Artwork Number Refer to the Custom Artwork Forms for new Artwork) Please enter your final card options from check boxes above. Example: 2042PGGMNM26A Final Part Number (Options #) iclass Programming Information Wiegand Programming Information Bit Numbers. (example: 26 bit) Bit Numbers. (example: 26 bit) Format Number (example: H030) Format Number (example: CC260) Facility Code. Facility Code. (Custom Formats) Site Code. City Code. (Custom Formats) Site Code. City Code. OEM Code. OEM Code. Internal Card No. Start. Stop. Internal Card No. Start. Stop. External Card No. Start. Stop. External Card No. Start. Stop. PIN: Sequential: Start # Random: Length. Special Instructions:. For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is placed in the bottom right-hand corner for iclass 3.56 MHz and in the bottom center for Wiegand on the back of the card. 4 For Laser Engraved external numbers, consult factory for lead times and cost. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Please consult with the printer manufacturer prior to ordering. September 9, HID Global Corporation. All rights reserved Page 5 of 7

16 3.56 MHz How to Order Guide D00529, B iclass Key Ordering Guide The iclass contactless smart Key offers read/write capability. Attach to a key ring or badge clip for convenient use. Please ensure each required option has been checked with the appropriate choice to fulfill a completed order form. 205 Base Model Part Number Worksheet iclass Memory Size and Allocation (Check One) 0-2k Bits (256 Bytes) with 2 Application Areas - 6k Bits (2k Bytes) with 2 Application Areas 2-6k Bits (2k Bytes) with 6 Application Areas Programming (Check One) C - Configured, Non-Programmed iclass. Programming Information Not Required. P - Programmed iclass. Specify Programming Information. Front Packaging K - Black with HID Standard Artwork Back Packaging N - None Key Numbering M - Sequential Matching Internal/External (Inkjetted) N - No External Key Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) Slot Punch 2 N - None 3-32k Bits (4K Bytes) Application areas 6k/2+6k/ 4-32k Bits (4K Bytes) Application areas 6k/6+6k/ Please enter your final Key options from check boxes above. Example: 2052CKNNN Final Part Number 205 K N N iclass Key Programming Information Bit Numbers. (example: 26 bit) Format Number (example: H030) Facility Code. (Custom Formats) Site Code. City Code. OEM Code. Internal Card # Start. Stop. External Card # Start. Stop. PIN: Sequential: Start # Random: Length. Special Instructions: The external key number is placed on the back of the key. 2 Key Ring sold separately (Part Number: ).. September 9, HID Global Corporation. All rights reserved Page 6 of 7

17 3.56 MHz How to Order Guide D00529, B iclass Tag Ordering Guide The iclass contactless smart Tag offers read/write capability. iclass enable existing credentials or non-metallic devices such as cell phones or PDAs by adhering the iclass Tag. Please ensure each required option has been checked with the appropriate choice to fulfill a completed order form. 206 Base Model Part Number Worksheet iclass Memory Size and Allocation (Check One) 0-2k Bits (256 Bytes) with 2 Application Areas - 6k Bits (2k Bytes) with 2 Application Areas 2-6k Bits (2k Bytes) with 6 Application Areas Programming (Check One) C - Configured, Non-Programmed iclass. Programming Information Not Required. P - Programmed iclass. Specify Programming Information. Front Packaging (Check One) S - Gray with HID Standard Artwork K - Black with HID Standard Artwork C - Custom Artwork Specify Custom Artwork Number 2 Back Packaging S - Adhesive Backing Tag Numbering (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Tag Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) Slot Punch N - None Option - Custom Artwork 3-32k Bits (4K Bytes) Application areas 6k/2+6k/ 4-32k Bits (4K Bytes) Application areas 6k/6+6k/ Front Packaging (Specify Artwork Number Refer to the Custom Artwork Forms for new artwork) Please enter your final Tag options from check boxes above. Example: 2062CSSNN Final Part Number 206 S N - (Options #) iclass Tag Programming Information Bit Numbers. (example: 26 bit) Format Number (example: H030) Facility Code. (Custom Formats) Site Code. City Code. OEM Code. Internal Card # Start. Stop. External Card # Start. Stop. PIN: Sequential: Start # Random: Length. Special Instructions: The external tag number is placed on the back of the tag. 2 For new artwork files, contact Customer Service for custom artwork number, lead-times, minimum order quantities, and cost. 3 The iclass Tag is not for use on cards that use full insertion or tractor feed type readers. Do not adhere to metal surfaces. Metal shields the RF, making the tag inoperable. Due to variations in cards and reading devices, HID does not claim that the iclass Tag will work in every situation. Functional and non-functional iclass Tags are available for compatibility testing with existing credential and reader technologies. Compatibility should be confirmed prior to ordering.. September 9, HID Global Corporation. All rights reserved Page 7 of 7

18 3.56 MHz How to Order Guide D00529, B iclass eunit Ordering Guide These OEM embedded products are available to OEM HID Connect Development Partners only. Contact your regional HID Connect sales representative for more information. September 9, HID Global Corporation. All rights reserved Page 8 of 7

19 3.56 MHz How to Order Guide D00529, B iclass Clamshell Card Ordering Guide The iclass contactless smart card offers read/write capability. Please ensure each required option has been checked with the appropriate choice to fulfill a completed order form. 208 Base Model Part Number Worksheet iclass Memory Size and Allocation (Check One) 0-2k Bits (256 Bytes) with 2 Application Areas Programming (Check One) C - Configured, Non-Programmed iclass. Programming Information Not Required. P - Programmed iclass. Specify Programming Information. Front Packaging (Check One) M - Plain White Vinyl with Matte Finish G - Plain White with Gloss Finish A - iclass Clamshell - Adhesive Front C - Custom Artwork - Specify Custom Artwork Number 2 Back Packaging (Check One) S - Base with Molded HID Logo C - Custom Artwork - Specify Custom Artwork Number 2 Card Numbering 3 (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) Slot Punch 5 (Check One) V - Vertical Slot Punch 2345 = Card ID Number YYYYYYYY-YY = Sales Order Number (Cover) Front Packaging (Base) Back Packaging Option - Custom Artwork 2 (Specify Artwork Number Refer to the Custom Artwork Forms for new Artwork) Please enter your final card options from check boxes above. Example: 2080PGSMV Final Part Number V - (Options #) iclass Card Programming Information Bit Numbers. (example: 26 bit) Format Number (example: H030) Facility Code. (Custom Formats) Site Code. City Code. OEM Code. Internal Card # Start. Stop. External Card # Start. Stop. PIN (2-2 digits): Sequential: Start # Random: Length. Special Instructions:. The part numbers for non-adhesive labels to be used with the iclass Clamshell with the adhesive front are 324GGN3 without slot and 324GGV3 with slot. 2 For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 3 The external card number is placed in the top left-hand corner on the back of the card. HID logo molded into base on back. September 9, HID Global Corporation. All rights reserved Page 9 of 7

20 3.56 MHz How to Order Guide D00529, B.8 430/440/436/446 MIFARE Card Ordering Guide Please ensure each required option has been checked with the appropriate choice to fulfill a completed order form. Base Model 430 (K) Standard PVC 440 (4K) Standard PVC Base Model 436 (K) Composite 40% Polyester / PVC * 446 (4K) Composite Polyester 40% / PVC * Programming (Check One) M - Programmed, (3.56 MHz with HID Format, 6 for instance H030). Specify Programming Information. N - Non-Programmed (3.56 MHz ) 6. Programming Information Not Required. S - Custom Programmed, Specify Programming Information. Front Packaging (Check One) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish Specify Custom Artwork Number E - Contact Module Embeddable Plain Gloss White Finish Optional Contact Smart Chip Module (Front or Back side) Back Packaging (Check One) G - Plain White with Gloss Finish 2 S - Standard HID MIFARE Artwork 2 - Plain White with Gloss Finish with Magnetic Stripe Standard HID MIFARE Artwork with Magnetic Stripe C - Custom Artwork with Gloss Finish Specify Custom Artwork Number, Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number, 2 Card Numbering 3 (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) A - Sequential Matching Internal/External (Laser Engraved) 4 B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4 C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4 Slot Punch 5 (Check One) N - No Slot Punch (Printed location of vertical slot punch will remain) V - Vertical Slot Punch Back Packaging Front Packaging 2345 = Card ID Number YYYYYYYY-YY = Sales Order Number Chip Type Operating System Chip Capacity Option - Contact Smart Chip Module (Check One) Memory Microprocessor Java.NET 28K 72K 64K 32K 608W Gemalto Axalto 28K.NET X X X 608G Gemalto Axalto Cryptoflex e-gate 32K X X 608Y Gemalto Axalto CyberFlex Access 64K v2c (Pegasus) X X X 608X Gemalto Axalto Cyberflex Access e-gate 32K X X X 608Q Gemalto Gemplus GemSafeXpresso 64K X X X 608H Oberthur IDOne Cosmo 64K X X X 608J Infineon Infineon SLE5542 (replaces SLE4442) X 608D NXP SmartMX Java JCOP 4/72 P5CC072 X X C700 Crescendo Refer to Crescendo documentation X X C200 Crescendo Refer to Crescendo documentation X X Option - Custom Artwork (Specify Artwork Number Refer to the Custom Artwork Forms for new Artwork) Please enter your final card options from check boxes above. Example: 430NGGNN Final Part Number - (Options #) 3.56 MHz Card Programming Information Bit Numbers. (example: 26 bit) Format Number (example: H030) Facility Code. (Custom Formats) Site Code. City Code. OEM Code. Internal Card No. Start. Stop. External Card No. Start. Stop. Special Instructions:. For Contact Smart Chip selection, refer to Contact Smart Card Request For Quotation, page 29. Standard configuration does not include a contact smart chip module. For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is placed in the bottom right-hand corner on the back of the card on Proximity Format Programming only. Permanent Unique MIFARE 32 Bit serial # cannot be printed on cards. 4 For Laser Engraved external numbers, consult factory for lead times and cost. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Please consult with the printer manufacturer prior to ordering. 6 Includes a permanent Unique MIFARE 32 Bit Serial number. * The composite construction is recommended for all cards with over-laminate applied. September 9, HID Global Corporation. All rights reserved Page 20 of 7

21 3.56 MHz How to Order Guide D00529, B.8 43/44/437/447 Combination (MIFARE /Prox) Card Ordering Guide Please ensure each required option has been checked with the appropriate choice to fulfill a completed order form. Base Model 43 (K) Standard PVC 44 (4K) Standard PVC Base Model 437 (K) Composite 40% Polyester / PVC * 447 (4K) Composite 40% Polyester / PVC * MIFARE Programming (Check One) L - Programmed, (25 khz only with HID Format) 6. Specify Programming Information. M - Programmed, (3.56 MHz only with HID Format 6, for instance H030). Specify Programming Information. B - Programmed, (25kHz and 3.56 MHz with HID Format) 6. Specify Programming Information. N - Non-Programmed (25 khz & 3.56 MHz without HID Format) 6. Programming Information Not Required. S - Custom Programmed, (3.56 MHz only) 6, Prox configured Specify Programming Information. R - Custom Programmed, (25kHz and Custom 3.56 MHz with HID Format) 6, Specify Programming Information. Front Packaging (Check One) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number E - Contact Module Embeddable Plain Gloss White Finish Back Packaging (Check One) G - Plain White with Gloss Finish 2 S - Standard HID Proximity & MIFARE Artwork 2 - Plain White with Gloss Finish with Magnetic Stripe Standard HID MIFARE Artwork with Magnetic Stripe 3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number, 2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number, 2 25 khz Proximity Card Numbering 3 (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) A - Sequential Matching Internal/External (Engraved) 4 B - Sequential Internal/Sequential Non-Matching External (Engraved) 4 C - Random Internal/Non-Matching Sequential External (Engraved) 4 Optional Contact Smart Chip Module (Front or Back side) Back Packaging Slot Punch 5 (Check One) N - No Slot Punch (Printed location of vertical slot punch will remain) V - Vertical Slot Punch 3.56 MIFARE Card Numbering 3 (Check One) M - Sequential Matching Internal/External (Inkjetted) A - Sequential Matching Internal/External (Engraved) 4 Front Packaging 2345 = Card ID Number YYYYYYYY-YY = Sales Order Number N - No External Card Numbering B - Sequential Internal/Sequential Non-Matching External (Engraved) 4 S - Sequential Internal/Sequential Non-Matching External (Inkjetted) C - Random Internal/Non-Matching Sequential External (Engraved) 4 R - Random Internal/Non-Matching Sequential External (Inkjetted) Chip Type Operating System Chip Capacity Optional Contact Smart Chip Module (Check One) Memory Microprocessor Java.NET 28K 72K 64K 32K 608W Gemalto Axalto 28K.NET X X X 608G Gemalto Axalto Cryptoflex e-gate 32K X X 608Y Gemalto Axalto CyberFlex Access 64K v2c (Pegasus) X X X 608X Gemalto Axalto Cyberflex Access e-gate 32K X X X 608Q Gemalto Gemplus GemSafeXpresso 64K X X X 608H Oberthur IDOne Cosmo 64K X X X 608J Infineon Infineon SLE5542 (replaces SLE4442) X 608D NXP SmartMX Java JCOP 4/72 P5CC072 X X C700 Crescendo Refer to Crescendo documentation X X C200 Crescendo Refer to Crescendo documentation X X Option - Custom Artwork (Specify Artwork Number Refer to the Custom Artwork Forms for new Artwork) Please enter your final card options from check boxes above. Example: 44NGGNNN Final Part Number - (Options #) 3.56 MHz Programming Information 25 khz Programming Information Bit Numbers. (example: 26 bit) Bit Numbers. (example: 26 bit) Format Number (example: H030) Format Number (example: H030) Facility Code. Facility Code. (Custom Formats) Site Code. City Code. (Custom Formats) Site Code. City Code. OEM Code. OEM Code. Internal Card No. Start. Stop. Internal Card No. Start. Stop. External Card No. Start. Stop. External Card No. Start. Stop. PIN: Sequential: Start # Random: Length. Special Instructions:. For Contact Smart Chip selection, refer to Contact Smart Card Request For Quotation, page 29. Standard configuration does not include a contact smart chip module. For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is placed in the bottom left-hand corner (25kHz) and in the bottom right-hand corner (3.56 MHz) on the back of the card on Proximity Programming only. Permanent unique MIFARE 32 Bit serial # cannot be printed on cards. 4 For Laser Engraved external numbers, consult factory for lead times and cost. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Please consult with the printer manufacturer prior to ordering. 6 Includes a permanent Unique MIFARE 32 Bit Serial number. * The composite construction is recommended for all cards with over-laminate applied. September 9, HID Global Corporation. All rights reserved Page 2 of 7

22 3.56 MHz How to Order Guide D00529, B.8 434/444 MIFARE Keyfob Ordering Guide Please ensure each required option has been checked with the appropriate choice to fulfill a completed order form. Base Model 434 (K) 444 (4K) Programming (Check One) M - Programmed, (3.56 MHz with HID Format, for instance H030). Specify Programming Information. N - Non-Programmed (3.56 MHz). Programming Information Not Required. S - Custom Programmed, Specify Programming Information. Front Packaging (Check One) S - Standard HID Artwork C - Custom Artwork - Specify Custom Artwork Number Back Packaging S - Standard Key Numbering (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) A - Sequential Matching Internal/External (Laser Engraved) 4 B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4 C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4 Slot Punch 2 N - None Please enter your final Key options from check boxes above. Example: 434NSSNN Final Part Number S N 3.56 MHz Card Programming Information Bit Numbers. (example: 26 bit) Format Number (example: H030) Facility Code. (Custom Formats) Site Code. City Code. OEM Code. Internal Card # Start. Stop. External Card # Start. Stop. Special Instructions: The external key number is placed on the back of the key. 2 Key Ring sold separately (Part Number: ). 3 Includes a permanent Unique MIFARE 56 Bit Serial number. 4 For Laser Engraved external numbers, consult factory for lead times and cost.. September 9, HID Global Corporation. All rights reserved Page 22 of 7

23 3.56 MHz How to Order Guide D00529, B.8 435/445 MIFARE Adhesive Tag Ordering Guide Please ensure each required option has been checked with the appropriate choice to fulfill a completed order form. Base Model 435 (K) 445 (4K) Programming (Check One) M - Programmed, (3.56 MHz with HID Format). Specify Programming Information. N - Non-Programmed (3.56 MHz). Programming Information Not Required. S - Custom Programmed, Specify Programming Information. Front Packaging (Check One) S - Standard HID Artwork C - Custom Artwork - Specify Custom Artwork Number Back Packaging S - Standard Tag Numbering (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) Slot Punch 2 N - None Please enter your final Tag options from check boxes above. Example: 435NSSNN Final Part Number S N 3.56 MHz Card Programming Information Bit Numbers. (example: 26 bit) Format Number (example: H030) Facility Code. (Custom Formats) Site Code. City Code. OEM Code. Internal Card # Start. Stop. External Card # Start. Stop. Special Instructions: The external tag number is placed on the back of the tag. 2 For new artwork files, contact Customer Service for custom artwork number, lead-times, minimum order quantities, and cost. 3 The Tag is not for use on cards that use full insertion or tractor feed type readers. 4 Includes a permanent Unique MIFARE 56 Bit Serial number.. Do not adhere to metal surfaces. Metal shields the RF, making the tag inoperable. Due to variations in cards and reading devices, HID does not claim that the Tag will work in every situation. Functional and non-functional Tags are available for compatibility testing with existing credential and reader technologies. Compatibility should be confirmed prior to ordering. September 9, HID Global Corporation. All rights reserved Page 23 of 7

24 3.56 MHz How to Order Guide D00529, B.8 450/456 DESFire Card Ordering Form Guide Please ensure each required option has been checked with the appropriate choice to fulfill a completed order form. Base Model 450 (4K) Standard PVC 456 (4K)Composite 40% Polyester / PVC * Programming (Check One) N - Non-Programmed (3.56 MHz) 6. Programming Information Not Required. S - Custom Programmed, (3.56 MHz only) 6, Specify Programming Information. Front Packaging (Check One) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish Specify Custom Artwork Number Front Packaging E - Contact Module Embeddable Plain Gloss White Finish Back Packaging (Check One) G - Plain White with Gloss Finish = Card ID Number YYYYYYYY-YY = Sales Order Number - Plain White with Gloss Finish with Magnetic Stripe 2 C - Custom Artwork with Gloss Finish Specify Custom Artwork Number, Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number, 2 Card Numbering 3 (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) Back Packaging A - Sequential Matching Internal/External (Laser Engraved) 4 B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4 C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4 Slot Punch 5 (Check One) N - No Slot Punch (Printed location of vertical slot punch will remain) V - Vertical Slot Punch Chip Type Operating System Chip Capacity Option - Contact Smart Chip Module (Check One) Memory Microprocessor Java.NET 28K 72K 64K 32K 608W Gemalto Axalto 28K.NET X X X 608G Gemalto Axalto Cryptoflex e-gate 32K X X 608Y Gemalto Axalto CyberFlex Access 64K v2c (Pegasus) X X X 608X Gemalto Axalto Cyberflex Access e-gate 32K X X X 608Q Gemalto Gemplus GemSafeXpresso 64K X X X 608H Oberthur IDOne Cosmo 64K X X X 608J Infineon Infineon SLE5542 (replaces SLE4442) X 608D NXP SmartMX Java JCOP 4/72 P5CC072 X X C700 Crescendo Refer to Crescendo documentation X X C200 Crescendo Refer to Crescendo documentation X X Option - Custom Artwork (Specify Artwork Number Refer to the Custom Artwork Forms for new Artwork) Please enter your final card options from check boxes above. Example: 450NGGNN Final Part Number - (Options #) 3.56 MHz Card Programming Information Bit Numbers. (example: 26 bit) Format Number (example: H030) Facility Code. (Custom Formats) Site Code. City Code. OEM Code. Internal Card No. Start. Stop. External Card No. Start. Stop. Special Instructions:. For Contact Smart Chip selection, refer to Contact Smart Card Request For Quotation, page 29. Standard configuration does not include a contact smart chip module. For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is placed in the bottom right-hand corner on the back of the card on Proximity Format Programming only. Permanent Unique MIFARE 56 Bit serial # cannot be printed on cards. 4 For Laser Engraved external numbers, consult factory for lead times and cost. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Please consult with the printer manufacturer prior to ordering. 6 Includes a permanent Unique MIFARE 56 Bit Serial number. * The composite construction is recommended for all cards with over-laminate applied. September 9, HID Global Corporation. All rights reserved Page 24 of 7

25 3.56 MHz How to Order Guide D00529, B.8 45/457 Combination (DESFire / PROX) Card Ordering Guide Please ensure each required option has been checked with the appropriate choice to fulfill a completed order form. Base Model 45 (4K) Standard PVC 457 (4K) Composite 40% Polyester / PVC * DESFire Programming (Check One) L - Programmed, (25 khz only) 6. Specify Programming Information. N - Non-Programmed (25 khz & 3.56 MHz) 6. Programming Information Not Required. S - Custom Programmed, (3.56 MHz only) 6, Prox Configured Specify Programming Information. R - Custom Programmed, (25kHz and Custom 3.56 MHz) 4, 6, Specify Programming Information. Front Packaging (Check One) G - Plain White with Gloss Finish C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number E - Contact Module Embeddable Plain Gloss White Finish Back Packaging (Check One) G - Plain White with Gloss Finish 2 - Plain White with Gloss Finish with Magnetic Stripe Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number, 2 C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number, 2 25 khz Proximity Card Numbering 3 (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) A - Sequential Matching Internal/External (Engraved) 4 B - Sequential Internal/Sequential Non-Matching External (Engraved) 4 C - Random Internal/Non-Matching Sequential External (Engraved) 4 Slot Punch 5 (Check One) N - No Slot Punch (Printed location of vertical slot punch will remain) V - Vertical Slot Punch 3.56 DESFire Card Numbering 3 (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) 2345 = Card ID Number YYYYYYYY-YY = Sales Order Number Optional Contact Smart Chip Module (Front or Back side) Back Packaging A - Sequential Matching Internal/External (Engraved) 4 B - Sequential Internal/Sequential Non-Matching External (Engraved) 4 C - Random Internal/Non-Matching Sequential External (Engraved) 4 Chip Type Operating System Chip Capacity Option - Contact Smart Chip Module (Check One) Memory Microprocessor Java.NET 28K 72K 64K 32K 608W Gemalto Axalto 28K.NET X X X 608G Gemalto Axalto Cryptoflex e-gate 32K X X 608Y Gemalto Axalto CyberFlex Access 64K v2c (Pegasus) X X X 608X Gemalto Axalto Cyberflex Access e-gate 32K X X X 608Q Gemalto Gemplus GemSafeXpresso 64K X X X 608H Oberthur IDOne Cosmo 64K X X X 608J Infineon Infineon SLE5542 (replaces SLE4442) X 608D NXP SmartMX Java JCOP 4/72 P5CC072 X X C700 Crescendo Refer to Crescendo documentation X X C200 Crescendo Refer to Crescendo documentation X X Option - Custom Artwork (Specify Artwork Number Refer to the Custom Artwork Forms for new Artwork) Please enter your final card options from check boxes above. Example: 457NGGNNN Final Part Number - (Options #) 3.56 MHz Programming Information 25 khz Programming Information Bit Numbers. (example: 26 bit) Format Number (example: H030) Facility Code. (Custom Formats) Site Code. City Code. OEM Code. Internal Card No. Start. Stop. External Card No. Start. Stop. PIN: Sequential: Start # Random: Length. Bit Numbers. (example: 26 bit) Format Number (example: H030) Facility Code. (Custom Formats) Site Code. City Code. OEM Code. Internal Card No. Start. Stop. External Card No. Start. Stop. Special Instructions:. For Contact Smart Chip selection, refer to the Contact Smart Card Request For Quotation on page 29 of this document. Standard configuration does not include a contact smart chip module. For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is placed in the bottom left-hand corner (25kHz) and in the bottom right-hand corner (3.56 MHz) on the back of the card on Proximity Programming only. Permanent unique MIFARE 56 Bit serial # cannot be printed on cards. 4 For Laser Engraved external numbers, consult factory for lead times and cost.. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Please consult with the printer manufacturer prior to ordering. 6 Includes a permanent Unique MIFARE 56 Bit Serial number. * The composite construction is recommended for all cards with over-laminate applied. September 9, HID Global Corporation. All rights reserved Page 25 of 7

26 3.56 MHz How to Order Guide D00529, B DESFire Keyfob Ordering Guide Please ensure each required option has been checked with the appropriate choice to fulfill a completed order form. Base Model 454 (4K) Programming (Check One) N - Non-Programmed (3.56 MHz). Programming Information Not Required. S - Custom Programmed, Specify Programming Information. Front Packaging (Check One) S - Standard HID Artwork C - Custom Artwork - Specify Custom Artwork Number Back Packaging S - Standard Key Numbering (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) A - Sequential Matching Internal/External (Laser Engraved) 4 B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4 C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4 Slot Punch 2 N - None Please enter your final Key options from check boxes above. Example: 454NSSNN Final Part Number 454 S N 3.56 MHz Card Programming Information Bit Numbers. (example: 26 bit) Format Number (example: H030) Facility Code. (Custom Formats) Site Code. City Code. OEM Code. Internal Card # Start. Stop. External Card # Start. Stop. Special Instructions: The external key number is placed on the back of the key. 2 Key Ring sold separately (Part Number: ). 3 Includes a permanent Unique MIFARE 56 Bit Serial number. 4 For Laser Engraved external numbers, consult factory for lead times and cost.. September 9, HID Global Corporation. All rights reserved Page 26 of 7

27 3.56 MHz How to Order Guide D00529, B DESFire Adhesive Tag Ordering Guide Please ensure each required option has been checked with the appropriate choice to fulfill a completed order form. Base Model 455 (4K) Programming (Check One) N - Non-Programmed (3.56 MHz). Programming Information Not Required. S - Custom Programmed, Specify Programming Information. Front Packaging (Check One) S - Standard HID Artwork C - Custom Artwork - Specify Custom Artwork Number Back Packaging S - Standard Tag Numbering (Check One) M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) Slot Punch 2 N - None Please enter your final Tag options from check boxes above. Example: 455NSSNN Final Part Number 455 S N 3.56 MHz Card Programming Information Bit Numbers. (example: 26 bit) Format Number (example: H030) Facility Code. (Custom Formats) Site Code. City Code. OEM Code. Internal Card # Start. Stop. External Card # Start. Stop. Special Instructions: The external tag number is placed on the back of the tag. 2 For new artwork files, contact Customer Service for custom artwork number, lead-times, minimum order quantities, and cost. 3 The Tag is not for use on cards that use full insertion or tractor feed type readers. 4 Includes a permanent Unique MIFARE 56 Bit Serial number.. Do not adhere to metal surfaces. Metal shields the RF, making the tag inoperable. Due to variations in cards and reading devices, HID does not claim that the Tag will work in every situation. Functional and non-functional Tags are available for compatibility testing with existing credential and reader technologies. Compatibility should be confirmed prior to ordering. September 9, HID Global Corporation. All rights reserved Page 27 of 7

28 3.56 MHz How to Order Guide D00529, B.8 FlexSmart to HID Credential Cross Reference Old Indala Part Number New HID Part Number MXISO 430 MXKEY 434 MXTAG 435 MXISO 440 MXKEY 444 MXTAG 445 DXISO 450 DXKEY 454 DXTAG 455 Description HID MIFARE Contactless Smart Card - Utilizes MIFARE 3.56 MHz Internal Smart Chip, Standard S50, K Memory with 6 Sectors HID MIFARE Contactless Smart Keyfob - Utilizes MIFARE 3.56 MHz Internal Smart Chip, Standard S50, K Memory with 6 Sectors HID MIFARE Contactless Smart Adhesive Tag - Utilizes MIFARE 3.56 MHz Internal Smart Chip, Standard S50, K Memory with 6 Sectors HID MIFARE Contactless Smart Card - Utilizes MIFARE 3.56 MHz Internal Smart Chip, Standard S70, 4 K Memory with 40 Sectors HID MIFARE Contactless Smart Keyfob - Utilizes MIFARE 3.56 MHz Internal Smart Chip, Standard S70, 4 K Memory with 40 Sectors HID MIFARE Contactless Smart Adhesive Tag - Utilizes MIFARE 3.56 MHz Internal Smart Chip, Standard S70, 4 K Memory with 40 Sectors HID DESFire Contactless Smart Card - Utilizes DESFire 3.56 MHz Internal Smart Chip, Standard D40, 4K memory with flexible file system HID DESFire Contactless Smart Keyfob - Utilizes DESFire 3.56 MHz Internal Smart Chip, Standard D40, 4K memory with flexible file system HID DESFire Contactless Smart Adhesive Tag - Utilizes DESFire 3.56 MHz Internal Smart Chip, Standard D40, 4K memory with flexible file system September 9, HID Global Corporation. All rights reserved Page 28 of 7

29 3.56 MHz How to Order Guide D00529, B.8 Contact Smart Card Request For Quotation Customer and Channel Information Sales Person: Date: (mm,dd,yr) Customer: Location: Direct HID Customer: Yes No (City, State, Country) Contact: Telephone #: Customer Type: OEM Integrator Dealer VAR Apps. Provider End User Other: Distribution Channel: Is the End User currently an HID Customer: Yes No What technology/technologies do they currently use: iclass HID Proximity Wiegand Mag. Stripe Barium Ferrite MIFARE Other Proximity: Other: What format do they use: Corp. 000 iclass Elite Standard 26 Bit OEM Proprietary Standard 37 Bit Other Proprietary: End User: Location: (City, State, Country) Contact: Telephone #: Does HID have permission to contact the Customer and/or End User directly: Customer: Yes No End User: Yes No Quantity: Requested Delivery Date: Base Card and Packaging Standard PVC Composite PVC/Polyester* * Composite Card is 25% Polyester and 75% PVC. 200 iclass embeddable 20/2/3/4 iclass embeddable 2030 iclass Prox embeddable 203/2/3/4 iclass Prox embeddable 397 Smart ISOProx II 398 Smart DuoProx II 450 DESFire Card 45 Proximity & DESFire Card 430 HID MIFARE (K) 440 HID MIFARE (4K) 43 Proximity and MIFARE (K) 44 Proximity and MIFARE (4K) Card Numbering Options: M - Sequential Matching Internal/External (Inkjetted) N - No External Card Numbering S - Sequential Internal/Sequential Non-Matching External (Inkjetted) R - Random Internal/Non-Matching Sequential External (Inkjetted) A - Sequential Matching Internal/External (Engraved): B - Sequential Internal/Sequential Non-Matching External (Engraved) C - Random Internal/Non-Matching Sequential External (Engraved) Slot Punch Options: Vertical Slot Punch Required Yes No Mag. Stripe: Yes No Location: Front Back # Tracks: Oersted: Type: (Primary) (, 2, 3) (2750, 4000,..) (HID Standard, Debitek, E-Mag,.etc) Mag. Stripe: Yes No Location: Front Back # Tracks: Oersted: Type: (Secondary) (, 2, 3) (2750, 4000,..) (HID Standard, Debitek, E-Mag,.etc) Packaging Front Packaging: Plain White Gloss Custom Artwork If Custom Artwork, # Colors: Back Packaging: Plain White Gloss Custom Artwork If Custom Artwork, # Colors: Custom Artwork: Custom Laminated by HID Surface Printing by HID HID Card Personalization Service Artwork printed by Customer: Dye Sublimation/Thermal Image UV Waterless Ink Process If using a printing process other than Dye Sublimation/Thermal Image Transfer, be sure to run samples and test for proper adhesion prior to the production print run. Do you need to print photos/barcode on the card after the base artwork is printed: Yes No Do you need a clear overlay to keep the ink from previously printed artwork from bleeding when the photo/barcode is printed: Yes No If an overlay is required, this will increase the card thickness by.002 to.004. This may result in the card thickness exceeding the ISO 786/ISO 780 standard. An increase in card thickness may prevent the card from fitting in a contact smart card reader. HID does not recommend placing custom graphics on either side of the Contact Smart Chip area. September 9, HID Global Corporation. All rights reserved Page 29 of 7

30 3.56 MHz How to Order Guide D00529, B.8 Programming iclass Programmed iclass Non-Programmed iclass Configured iclass Facility Code: Bit Format: iclass Elite: Yes No Inkjet Card Number: Yes No Laser Engraved Card Number: Yes No 25 khz Proximity Programmed 25 khz Proximity Non-Programmed 25 khz Proximity Facility Code: Bit Format: Corporate 000: Yes No Inkjet Card Number: Yes No Laser Engraved Card Number: Yes No MIFARE Standard MIFARE 3.56 MHz modules come from the manufacturer with a permanent unique 32-bit serial number burned into the memory. This number is not available to be marked on the back of the card. This number is determined by reading each individual card. Custom format programmed by HID into MIFARE memory: Yes No Facility Code: Bit Format: Corporate 000: Yes No Inkjet Card Number: Yes No Laser Engraved Card Number: Yes No Contact Smart Chip Module Information Applications Contact Smart Chip Module is to be Used for: E-Purse/Cashless Vending Secure Log On Loyalty Transportation Personal/Employee Info. Medical Records Physical Access Control Biometrics PKI (Public Key Infrastructure) Other: Applications Provider Schlumberger Gemplus Oberthur Datakey G & D Other: Undecided If undecided define contact module type: Processor Module Processor with Cryptographic Coprocessor Memory Module Contact Smart Chip Module Model If the Customer has decided on the contact module manufacturer and model please list: Typical Options:. Schlumberger: Cyberflex, Cryptoflex, Payflex 2. Gemplus: MPCOS-EMV, GPK, GemXpresso 3. Oberthur: AuthentiC, GalactiC4. Datakey: 330, 330J 5. G & D: Starcos 2., 2.3, 2.4 SPK, Smartcafe 6. etc Memory Size K 2k 4K 8K 6k 32k 64K Bits Bytes Note: Eight (8) Bits in One () Byte Operating System and File Structure (Unless specified the current available version of the O/S chosen will be supplied) Suppliers Standard JAVA Other: Undecided Desired Module Location: Front of Card Back of Card Desired Communication Protocol: T=0 T= I 2 C Other: Undecided Unknown Note: Module Communication Protocol must be the same as that of contact reader chosen. Comments: September 9, HID Global Corporation. All rights reserved Page 30 of 7

31 3.56 MHz How to Order Guide D00529, B.8 Custom Credentials Artwork Checklist Company Name: PO No. Date Quantity: Card/Key/Tag and Artwork File No. Minimum order quantity for Custom Artwork is 500 cards per order. Some Custom Artworks may be higher. Minimum order quantity for Custom Artwork Tags/Keys is 0,000 tags per order. This form, accompanied with the Custom Artwork placement and Inkjet Location Form MUST be filled out, SIGNED and returned to HID so that your order can be processed. Credential Type: Standard PVC Cards or Keys/Tags iclass Card 20 - iclass embeddable Card iclass Prox Card iclass Wiegand iclass Prox embeddable Card iclass Tag iclass Clamshell Card 430/440 - HID MIFARE 43/44 - HID Proximity & MIFARE 434/444 - HID MIFARE Keyfob 435/445 - HID MIFARE Tag HID DESFire 45 - HID DESFire & Proximity HID DESFire Keyfob HID DESFire Tag Credential Type: Composite PVC/Polyester Cards (Additional fee and longer lead-time) 20 - iclass Card 2 - iclass embeddable Card 22 - iclass Prox Card 23 - iclass Prox embeddable Card 24 - iclass Wiegand 436/446 - HID MIFARE 437/447 - HID Proximity & MIFARE HID DESFire HID DESFire & Proximity Artwork Placement, Font styles and Colors: Artwork Placement on Front Side of card Artwork Placement on Back Side of card. Font Style(s): Front Side Colors: Back Side Colors Do you plan to print over or around the custom artwork with a dye sublimation printer? Yes No Surface or Laminated Lithographic Printing (Refer to the Anti-Counterfeiting Descriptions page in this guide for details) Card Options: Slot Punch 2,5 : Yes No Horizontal Vertical Signature Panel: Yes No Size:. Front Card Finish: Gloss Back Card Finish: Gloss Magnetic Stripe Coercivity: HID Standard (4000 OE) (2750 OE) Magnetic Stripe Type: Standard 3 Track Debitek /8" Other:. Anti-Counterfeiting Options: Invisible Ink: Red Yellow Blue Green Glow in the Dark Micro-fine Print: Yes No Hologram 7 : Surface Embedded Notes:. Standard Composite Card is 25% Polyester and 75% PVC. A.035" thick card with 35% Polyester is also available. Contact Customer Service for details. 2. Some cards will have printed "indicators" on the back of the card to show the vertical slot punch location. 3. Some cards will have a small HID logo " " and reference number, custom artwork file number, and external number (optional) printed on the card. 4. Do not order slot punched cards for use in dye sublimation printers. Slot edge may damage the printer ribbon. Slot should be punched after dye sublimation printing. 5. Some video imaging printers cannot accommodate pre-slot punched cards. Please consult with the printer manufacturer prior to ordering 6. Surface Holograms cannot be placed over internal electronics. 7. Representation, Warranty and Indemnity. Customer represents and warrants to HID that it owns, controls, or otherwise has the full and unrestricted right to use the custom artwork provided to HID for use in connection with this Custom Artwork Checklist Form (the Custom Artwork ) and to authorize and license HID to use and apply the Custom Artwork to the cards in the manner provided in this Custom Artwork Checklist Form. Customer agrees to indemnify HID and hold it harmless from and against any claims, liabilities, losses and/or expenses (including reasonable attorney fees and costs of suit) arising out of the use by HID of the Custom Artwork in the manner provided by this Custom Artwork Checklist Form or by any custom artwork proofs approved by the Customer. 8. HID does not recommend placing custom graphics on either side of the Contact Smart Chip area. Name: Signature: Date:. September 9, HID Global Corporation. All rights reserved Page 3 of 7

32 3.56 MHz How to Order Guide D00529, B.8 Electronic Artwork Checklist File Submission & Preparation This document gives digital artwork specifications from our press department. Use these guidelines and your project should go smoothly through the pre-press department. MEDIA: Please submit files via or on CD. Compressed files should be self extracting. Submitted media will not be returned o the customer. FTP site available upon request. PLATFORM: MS WINDOWS /Macintosh Projects that are set up in any of the major applications (listed below under "Graphic Applications") generally translate to Macintosh smoothly. Please save your final file with pictures embedded, outlined fonts and EPS Vector editable file. FONTS: Use Type fonts and include screen and printer fonts on disk. Type may be converted to paths or outlines, but we cannot make copy changes to text submitted in this form. In addition, converted type loses the benefits of PostScript font definitions; hence, type quality may suffer. This is more noticeable in small type (-8 point). PLACED GRAPHICS: All placed graphics, saved as TIFF or EPS, should be included in their native program. If a Photoshop image is placed in a Quark document, we need the Photoshop image to produce the job. Sizing, cropping, rotation, etc. should all be done to the element in its native program and placed in Quark. Color images should be converted from RGB to CMYK. Special colors should be designated using PMS or provide color sample to be matched. Resolution of color images, B&W halftones, or duotones should be 300 dpi. GRAPHIC APPLICATIONS (latest version): Adobe Photoshop - Adobe Illustrator - QuarkXpress BITMAPS AND TRACING: Scanned line art converted to bitmaps should have a resolution of dpi. Lower resolutions will result in jagged curves. Many programs can convert (trace) bitmaps to vector drawings. Smoothing a traced image can be time consuming, but once completed yields a resolution independent graphic that will provide crisp reproduction for all future uses. We can provide this service for you at our regular file intervention rate. Minimum required DPI (dots per inch) is 300. BLEEDS: Please incorporate 0.25" of overwork for all bleed images. Any portion of the image that extends to the edge of the product is considered a bleed. Minimum required size with bleed is 2.227" x 3.477" for standard card size file. MARGINS: Elements that do not bleed should be at least 0.25" from the edge. September 9, HID Global Corporation. All rights reserved Page 32 of 7

33 3.56 MHz How to Order Guide D00529, B.8 Anti-Counterfeiting Descriptions Printing Types ) Laminated Lithographic Printing: High resolution (>3600 dpi) offset printing technology yields photographic quality images. Laminated printing places the ink layer under a rigid clear plastic overlay which protects the printed image from abrasion and allows you to re-print over the existing artwork on the card. The cards are compatible with all Photo ID printing methods: dye-sub, reverse transfer and resin transfer. 2) Surface Lithographic Printing: This process is identical to the Laminated Lithographic Printing, but the ink layer is applied to the outer surface of the finished card and may include a clear coat. You may not be able to re-print on the card. The inks and clear coat are not compatible with D2T2 printing (Dye Diffusion Thermal Transfer, AKA dyesublimation) but may be compatible with reverse transfer printing methods. The surface printing is durable enough for normal handling and use, but may wear more quickly in heavy use or swipe (magnetic stripe) applications. It is not recommended for high use applications, or for printing critical data such as emergency information. This process is often used for quick turnaround of simple text and graphics on card backs. Surface Hologram Holograms are one of the most recognizable anti-counterfeiting devices on the market. The optically variable image cannot be duplicated with standard printing. Surface holograms are applied via hot stamping to the exterior of the card surface. This style of application is common to all financial transaction cards. Embedded Hologram Embedded holograms are positioned under the rigid clear outer layer of the card surface. Unlike surface holograms, embedded holograms are amenable to dye sublimation allowing the entire card surface to be personalized. This application style furthers the effectiveness of the anti-counterfeiting feature by requiring expensive specialized equipment during manufacture. Embedded Advantage Security Seal The Advantage product is a specialized optically variable device that is manufactured in only one plant worldwide. It has been the OVD of choice for many government identity documents, including many states driver licenses and the INS card. Like the embedded hologram, this device is placed under the rigid clear outer layer and is not subject to surface abrasion and wear. Advantage images shift from orange to green at different viewing angles. Invisible Ultra-Violet (UV) Fluorescing Images Common on credit card, currency and travel documents, invisible ink images provide a covert anti-counterfeiting mechanism. Though blue/violet fluorescing ink is readily available and inexpensive, red, green, yellow and orange fluorescing pigments remain difficult to acquire. This covert anti-counterfeiting device remains popular because of its relatively easy implementation in the field. Micro-fine Printing Very small spot color printing that exploits the limitations of inkjet, toner based (laser) and dye sublimation printers. Counterfeit reproductions can be determined with a handheld magnification tool. Guilloche Printing Fine line interlocking spot color patterns that are extremely difficult to scan and reproduce. These design elements are often multicolor and are commonly used on currency and travel documents. Composite Formulations Composite formulations are designed for durable applications and for use in dye sublimation printers that employ re-transfer technology and/or polyester laminate patches. Composite cards will minimize the warping caused by such processes. These formulations derive their strength from combining biaxial oriented polyester (OPET) with traditional polyvinyl chloride (PVC). September 9, HID Global Corporation. All rights reserved Page 33 of 7

34 3.56 MHz How to Order Guide D00529, B.8 Custom Card Artwork Placement and Inkjet Location Guides Standard PVC and Composite PVC/Polyester Cards Company Name: PO No. Date Quantity: Card and Artwork File No.. External Number: Standard Location: The standard external # location is shown on the template below. The external # can only be printed on the back of the card. The external # will be printed in the standard location, unless otherwise specified. Custom Location: Please indicate the desired external # location by writing "2345" on the appropriate template. The external # can only be printed on the back of the card. 2. An Artwork File Number is placed on each card. The standard location is indicated by the "CCCCC". The standard location for the custom artwork number is on the back side of the card. Please indicate/incorporate the artwork number on the artwork. If there will be front side printing only, the custom artwork number will be placed on the printed side, opposite the standard location. 3. Artwork Placement: Please indicate the placement of your artwork on the template below. Custom artwork must clear the slot punch locations and edges by a min. of 0.25". 4. Magnetic Stripe (Optional): If the location of the magnetic stripe is custom (other than standard) and/or if other types of magnetic stripes are to be added to the card (i.e. Debitek stripe), indicate the locations of the magnetic stripe(s) on the template. Standard Location Custom Location Slot Punch Indicators Card Artwork Templates Front 2345 = Card ID Number YYYYYYYY-YY = Sales Order Number Back Contact Smart Chip location to be embedded compliant with ISO 786 on front or back side. HID does not recommend placing custom graphics on either side of the Contact Smart Chip area. Notes:. External # location reads in the direction as shown. External # character height is approximately 0.". 2. Cards will have a small HID logo " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3. A standard custom artwork file number is printed on the back side of the card. Front side printing of this same number is an option. 4. Slot punch location "indicators" will appear on the back side of the card only. 5. Do not order slot punched cards for use in dye sublimation printers. Slot edge may damage the printer ribbon. Slot should be punched after dye sublimation printing. 6. Some video imaging printers cannot accommodate pre-slot punched cards. Please consult with the printer manufacturer prior to ordering. Name: Signature: Date:. September 9, HID Global Corporation. All rights reserved Page 34 of 7

35 3.56 MHz How to Order Guide D00529, B.8 Tag Credentials iclass Tag MIFARE Tag DESFire Tag Company Name: PO No. Date Quantity: Tag and Artwork File No.. External Number: Standard Location: The external # can only be printed on the back of the Tag. 2. Artwork Placement: Please indicate the placement of your artwork on the template below (Front side only). Custom artwork must clear the inner circle by a min. of 0.25". Tag Artwork Template Front Notes:. Minimum order quantity 0,000 pieces per Purchase Order. 2. Maximum two color artwork. Name: Signature: Date:. September 9, HID Global Corporation. All rights reserved Page 35 of 7

36 3.56 MHz How to Order Guide D00529, B.8 Clamshell Cards iclass Clamshell Cards Company Name: PO No. Date Quantity: Card and Artwork File No.. External Number: Standard Location: The standard external # location is shown on the template below. The external # can only be printed on the back of the card. The external # will be printed in the standard location, unless otherwise specified. Custom Location: Please indicate the desired external # location by writing "2345" on the appropriate template. The external # can only be printed on the back of the card. 2. Artwork Placement: Please indicate the placement of your artwork on the template below. Custom artwork must clear the slot punch location and edges by a min. of 0.25" Card Artwork Templates Cover (Front) 2345 = Card ID Number YYYYYYYY-YY = Sales Order Number Base (Back) Notes:. All iclass Clamshell cards have a molded HID logo on the back side (as indicated) as well as a beveled edge all the way around the card. Custom artwork graphics need to clear the molded logo and bevel by a minimum of 0.25" 2. External # location reads in the direction as shown. External # character height is approximately 0." 3. Please note that there is no custom artwork file number on the iclass Clamshell. Name: Signature: Date:. September 9, HID Global Corporation. All rights reserved Page 36 of 7

37 3.56 MHz How to Order Guide D00529, B.8 iclass Readers Read-Only Reader Part Numbers and Options Card Reader Description iclass R0 Contactless Smart Card Reader: Mullion Mount - Read-Only, RoHS Compliant iclass R5 Contactless Smart Card Reader: Mullion Mount - Read-Only, RoHS Compliant iclass R30 Contactless Smart Card Reader: European & Asian Back Box Mount Read-Only, RoHS Compliant iclass R40 Contactless Smart Card Reader: US, European & Asian Back Box Mount - Read-Only, RoHS Compliant iclass RK40 Contactless Smart Card Reader: With Keypad - US, European & Asian Back Box Mount Read-Only, RoHS Compliant iclass R90 Contactless Smart Card Reader: Long Read Range - Read-Only, RoHS Compliant iclass RKL55 Contactless Smart Card Reader: Read, with LCD and Keypad US, European and Asian Back Box Mount Wiegand or Clock and Data output RoHS Compliant (Wiegand) (C&D) (Wiegand) (C&D) (Wiegand) (C&D) (Wiegand) (C&D) (Wiegand) (C&D) (Wiegand) (Wiegand) (C&D) Base Part No Current Rev. No.* B A B B B Color Options G = Charcoal Gray K = Black G = Charcoal Gray K = Black G = Charcoal Gray K = Black G = Charcoal Gray K = Black G = Charcoal Gray K = Black Hardware Options N = Pigtail 8 (0.5 meter) T = Terminal Strip N = Pigtail 8 (0.5 meter) T = Terminal Strip N = Pigtail 8 (0.5 meter) T = Terminal Strip N = Pigtail 8 (0.5 meter) T = Terminal Strip N = Pigtail 8 (0.5 meter) T = Terminal Strip 650 A K = Black T = Terminal Strip B K = Black T = Terminal Strip Configuration Setting Options iclass Security 2 0 C D 0 C D 0 C D 0 C D 0 C D 0 C D 0 C D MIFARE CSN 3 or FIPS20 4 Wiegand Output Mode Z A C D F G H I J Z A C D F G H I J Z A C D F G H I J Z A C D F G H I J Z A C D F G H I J 0 = CSN option not available Z *Revision numbers and availability are subject to change without notice. Consult factory for availability. Configuration Setting Options are as follows (Factory or Field Configurable): 00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green 0 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green 02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green 2 iclass Security Options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management. 0 = Standard (Reads all iclass cards with unique keys diversified from HID master key) = Custom, not valid with FIPS20 options (Reads only iclass cards with unique keys diversified from matching site specific master key; consult factory for availability) C = Standard with Open Collector Tamper enabled D = Custom with Open Collector Tamper enabled 3 MIFARE Card Serial Number (CSN) Wiegand Output Modes are as follows (Factory or Field Configurable): Refer to the "iclass Reader Wiegand Output Configuration Guide for more details. 0 = 32 bit = 32 bit reverse (Same as 6055A and 6055BXX00) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Z = CSN Suppressed 4 FIPS20 (USA Government Smart Card) Formats: 7 = 200 bit, 8 = 64 bit, MSB, 9 = 64 bit, LSB, A = 40 bit, MSB, C = 40 bit, LSB, D = 75 bit GSA, F = HMAC bit, G = HMAC + 40 bit MSB, H = HMAC + 64 bit MSB, I = 80 bit combined, J = 32 bit HMAC For more information on the FIPS20 outputs, please refer to the output selection guide: (For additional outputs, expiration date, GUID, TWIC please contact HID for a Command Card). 5 Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options: 00 = Buffer one key, no parity, 4 bit message 09 = Buffer one key, add compliment, 8 bit message (Dorado) 0 = Buffer six keys and add parity = Buffer one key and add parity 4 = Buffer one to five keys (Standard 26 bit output) 9 = Buffer four keys and add parity 22 = Local PIN Verify. Requires User PIN code to be programmed into the iclass Credential at the factory or by using the iclass Card Programmer (please consult factory for availability.) 6 Contact Factory for pricing, availability, and minimum order quantity. Readers that are RoHS compliant (RoHS = Restriction of the use of certain hazardous substances in electrical and electronic equipment) will be appropriately marked on reader and box. Keypad Configuration Setting Options 5 For Keypad readers only For Keypad readers only For Keypad readers only For Keypad readers only For Keypad readers only For Keypad readers only For Keypad readers only For Keypad readers only Optional US Government (FIPS20) Format (N/A) -G3.0 (N/A) -G3.0 (N/A) -G3.0 (N/A) -G (N/A) G3.0 For Keypad readers only (N/A) N/A OptionalCu stom 6 -XXXX Y -XXXX Y -XXXX Y -XXXX Y -XXXX Y -XXXX Y September 9, HID Global Corporation. All rights reserved Page 37 of 7

38 3.56 MHz How to Order Guide D00529, B.8 multiclass Read-Only Reader Part Numbers and Options Card Reader Description Base Part No Current Rev No* Color Options Hardware Options Configuration Setting Options iclass Security 2 MIFARE CSN 3 or FIPS20 4 Wiegand Output Mode Keypad Configuration Setting Options 5 Optional US Government (FIPS20) Optional Custom 6 iclass RP5 Combination Tech Reader: HID, AWID or Indala Prox, iclass & FIPS20- Mullion Mount (Wiegand) Read Only, RoHS Compliant (C&D) A G = Charcoal Gray K = Black Pigtail Only N = HID and AWID Module D = Indala Module C D Z A C D F G H I J For Keypad readers only For Keypad readers only (N/A) -G3.0 -XXXX Y iclass RP40 Combination Technology Reader: HID, AWID, or Indala Prox, iclass & FIP20 US, European & Asian Back Box Mount - Read Only, RoHS Compliant (Wiegand)) (C&D) B G = Charcoal Gray K = Black Pigtail Only N = HID and AWID Module D = Indala Module C D Z A C D F G H I J For Keypad readers only For Keypad readers only (N/A) -G3.0 -XXXX Y iclass RPK40 Combination Tech Reader: HID, AWID, or Indala Prox, iclass & FIP20 US, European & Asian Back Box Mount - Read Only, RoHS Compliant (Wiegand) (C&D) A G = Charcoal Gray K = Black Pigtail Only N = HID and AWID Module D = Indala Module C D Z A C D F G H I J (N/A) -G3.0 -XXXX Y *Revision numbers and availability are subject to change without notice. Consult factory for availability. Configuration Setting Options are as follows (Factory or Field Configurable): 00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green 0 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green 02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green 2 iclass Security Options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management. 0 = Standard (Reads all iclass cards with unique keys diversified from HID master key) = Custom, not valid with FIPS20 options (Reads only iclass cards with unique keys diversified from matching site specific master key; consult factory for availability) C = Standard with Open Collector Tamper enabled D = Custom with Open Collector Tamper enabled 3 MIFARE Card Serial Number (CSN) Wiegand Output Modes are as follows (Factory or Field Configurable): Refer to the "iclass Reader Wiegand Output Configuration Guide for more details. 0 = 32 bit = 32 bit reverse (Same as 6055A and 6055BXX00) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Z = CSN Suppressed 4 FIPS20 (USA Government Smart Card) Formats: 7 = 200 bit, 8 = 64 bit, MSB, 9 = 64 bit, LSB, A = 40 bit, MSB, C = 40 bit, LSB, D = 75 bit GSA, F = HMAC bit, G = HMAC + 40 bit MSB, H = HMAC + 64 bit MSB, I = 80 bit combined, J = 32 bit HMAC For more information on the FIPS20 outputs, please refer to the output selection guide: (For additional outputs, expiration date, GUID, TWIC please contact HID for a Command Card). 5 Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options: 00 = Buffer one key, no parity, 4 bit message 09 = Buffer one key, add compliment, 8 bit message (Dorado) 0 = Buffer six keys and add parity = Buffer one key and add parity 4 = Buffer one to five keys (Standard 26 bit output) 9 = Buffer four keys and add parity 22 = Local PIN Verify. Requires User PIN code to be programmed into the iclass Credential at the factory or by using the iclass Card Programmer (please consult factory for availability.) 6 Contact Factory for pricing, availability, and minimum order quantity. Readers that are RoHS compliant (RoHS = Restriction of the use of certain hazardous substances in electrical and electronic equipment) will be appropriately marked on reader and box. September 9, HID Global Corporation. All rights reserved Page 38 of 7

39 3.56 MHz How to Order Guide D00529, B.8 Read/Write Reader Part Numbers and Options Card Reader Description iclass RW00 Contactless Smart Card Reader/Writer: Read/Write Mullion Mount Wiegand and RS232 or RS485 or USB or UART iclass RW50 Contactless Smart Card Reader/Writer: Read/Write Mullion Mount Wiegand and RS232 or RS485 or USB or UART iclass RW300 Contactless Smart Card Reader/Writer: Read/Write European and Asian Back Box Mount Wiegand and RS232 or RS485 or USB or UART iclass RW400 Contactless Smart Card Reader/Writer: Read/Write US, European and Asian Back Box Mount Wiegand and RS232 or RS485 or USB or UART iclass RWK400 Contactless Smart Card Reader/Writer: Read/Write, with Keypad US, European and Asian Back Box Mount Wiegand Output, and/or RS-232/422 or USB or UART (RoHS Compliant) (RoHS Compliant) (RoHS Compliant) (RoHS Compliant) (RoHS Compliant) iclass RWKL550 Contactless Smart Card Reader/Writer: Read/Write, with LCD and Keypad US, European and Asian Back Box Mount Wiegand Output, and/or RS-232, RS- 485, USB or UART (RoHS Compliant) Base Part No. Current Rev. No.* 60 B 64 A 6 B 62 B 63 B Color Options G = Gray K = Black G = Gray K = Black G = Gray K = Black G = Gray K = Black G = Gray K = Black 67 B K = Black Hardware Options 7 (All Terminal Strip) T = RS232 4 = RS485(Full-Duplex) U = USB B = Uart to Uart (All Terminal Strip) T = RS232 4 = RS485(Full-Duplex) U = USB B = Uart to Uart (All Terminal Strip) T = RS232 4 = RS485(Full-Duplex) U = USB B = Uart to Uart (All Terminal Strip) T = RS232 4 = RS485(Full-Duplex) U = USB B = Uart to Uart (All Terminal Strip) T = RS232 4 = RS485(Full-Duplex) U = USB B = Uart to Uart (All Terminal Strip) T = RS232 4 = RS485(Full-Duplex) U = USB B = Uart to Uart Configuration Setting Options iclass Security 2 0 C D 0 C D 0 C D 0 C D 0 C D 0 C D MIFARE CSN 3 or Optional Keypad Configuration FIPS20 4 Wiegand US Government Setting Options Output Mode 5 (FIPS20) Z A C D F G H I J Z A C D F G H I J Z A C D F G H I J Z A C D F G H I J Z A C D F G H I J Z For Keypad readers only For Keypad readers only For Keypad readers only For Keypad readers only For Keypad readers only For Keypad readers only For Keypad readers only For Keypad readers only *Revision numbers and availability are subject to change without notice. Consult factory for availability. Configuration Setting Options are as follows (Factory or Field Configurable): 00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green 0 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green 02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green 2 iclass Security options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management. 0 = Standard (Reads all iclass cards with unique keys diversified from HID master key) = Elite Key (Reads only iclass cards with unique keys diversified from matching site specific master key; consult factory for availability) C = Standard with Open Collector Tamper enabled D = Custom with Open Collector Tamper enabled 3 MIFARE Card Serial Number (CSN) Wiegand Output Modes are as follows (Factory or Field Configurable): Refer to the "iclass Reader Wiegand Output Configuration Guide for more details. 0 = 32 bit = 32 bit reverse (Same as 6055A and 6055BXX00) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Z = CSN Suppressed 4 FIPS20 (USA Government Smart Card) Formats: 7 = 200 bit, 8 = 64 bit, MSB, 9 = 64 bit, LSB, A = 40 bit, MSB, C = 40 bit, LSB, D = 75 bit GSA, F = HMAC bit, G = HMAC + 40 bit MSB, H = HMAC + 64 bit MSB, I = 80 bit combined, J = 32 bit HMAC For more information on the FIPS20 outputs, please refer to the output selection guide: (For additional outputs, expiration date, GUID, TWIC please contact HID for a Command Card). 5 Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options: 00 = Buffer one key, no parity, 4 bit message 09 = Buffer one key, add compliment, 8 bit message (Dorado) 0 = Buffer six keys and add parity = Buffer one key and add parity 4 = Buffer one to five keys (Standard 26 bit output) 9 = Buffer four keys and add parity 22 = Local PIN Verify. Requires User PIN code to be programmed into the iclass Credential at the factory or by using the iclass Card Programmer (please consult factory for availability.) 6 Contact Factory for pricing, availability, and minimum order quantity. 7 All the following communication modules allow host driven communication using the iclass Serial Protocol. All the following communication modules (except USB) allow for card ID reporting instantiated by the reader. For RS485 (Half-Duplex) compliancy, see iclass HADP/OSDP Readers. Readers that are RoHS compliant (RoHS = Restriction of the use of certain hazardous substances in electrical and electronic equipment) will be appropriately marked on reader and box. (N/A) -G3.0 (N/A) -G3.0 (N/A) -G3.0 (N/A) -G3.0 (N/A) -G3.0 N/A Optional Custom 6 -XXXX Y -XXXX Y -XXXX Y -XXXX Y -XXXX Y -XXXX Y September 9, HID Global Corporation. All rights reserved Page 39 of 7

40 3.56 MHz How to Order Guide D00529, B.8 iclass/multiclass Transit Reader Part Numbers and Options Card Reader Description Base Part No. Current Rev. No.* Color Options Hardware Options Configuration Setting Options iclass Security 2 MIFARE CSN 3 or FeliCa IDm Output iclass R0-T Contactless Smart Card Reader iclass and FeliCa G = Charcoal Gray N = Pigtail 8 (0.5 meter) Mullion Mount (Wiegand) 609 B K = Black Read-Only, RoHS Compliant 0 D E F Z iclass R5-T Contactless Smart Card Reader iclass and FeliCa G = Charcoal Gray 649 A N = Pigtail 8 (0.5 meter) Mullion Mount (Wiegand) K = Black Read-Only, RoHS Compliant 0 D E F Z iclass R30-T Contactless Smart Card Reader iclass and FeliCa G = Charcoal Gray 69 B N = Pigtail 8 (0.5 meter) European & Asian Back Box Mount (Wiegand) K = Black Read-Only, RoHS Compliant 0 D E F Z iclass R40-T Contactless Smart Card Reader iclass and FeliCa G = Charcoal Gray 629 B N = Pigtail 8 (0.5 meter) US, European & Asian Back Box Mount (Wiegand) K = Black Read-Only, RoHS Compliant 0 D E F Z iclass RK40-T Contactless Smart Card Reader with Keypad - iclass and FeliCa (Wiegand) G = Charcoal Gray 639 B N = Pigtail 8 (0.5 meter) US, European & Asian Back Box Mount K = Black Read-Only, RoHS Compliant 0 D E F Z multiclass RP5-T Combination Technology Reader Pigtail Only HID, AWID or Indala Prox, iclass and FeliCa G = Charcoal Gray 644 A N = HID and AWID Module Mullion Mount (Wiegand) K = Black D = Indala Module Read Only, RoHS Compliant 0 D E F Z multiclass RP40-T Combination Technology Reader Pigtail Only HID, AWID, or Indala Prox, iclass and FeliCa G = Charcoal Gray 624 B N = HID and AWID Module US, European & Asian Back Box Mount - (Wiegand) K = Black D = Indala Module Read Only, RoHS Compliant 0 D E F Z multiclass RPK40-T Combination Technology Reader Pigtail Only HID, AWID, or Indala Prox, iclass and FeliCa G = Charcoal Gray 634 A N = HID and AWID Module US, European & Asian Back Box Mount - (Wiegand) K = Black D = Indala Module Read Only, RoHS Compliant 0 D E F Z * Transit readers have the ability to read FeliCa IDm's. **Revision numbers are subject to change without notice. Consult factory for availability. Configuration Setting Options are as follows (Factory or Field Configurable): 00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green 0 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green 02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green 2 iclass Security Options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management. 0 = Standard (Reads all iclass cards with unique keys diversified from HID master key) 3 MIFARE Card Serial Number (CSN,) FeliCa IDm output modes are as follows (Factory or Field Configurable): Refer to the "iclass Reader Wiegand Output Configuration Guide for more details. D = 64 bit LSB E = 26 bit (Even parity + 24 bit LSB CSN + Odd parity) F = 64 bits LSB FeliCa or 64 bits LSB MIFARE Z = CSN Suppressed 5 Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options: 00 = Buffer one key, no parity, 4 bit message 09 = Buffer one key, add compliment, 8 bit message (Dorado) 0 = Buffer six keys and add parity = Buffer one key and add parity 4 = Buffer one to five keys (Standard 26 bit output) 9 = Buffer four keys and add parity 22 = Local PIN Verify. Requires User PIN code to be programmed into the iclass Credential at the factory or by using the iclass Card Programmer (please consult factory for availability.) 6 Contact Factory for pricing, availability, and minimum order quantity. Readers that are RoHS compliant (RoHS = Restriction of the use of certain hazardous substances in electrical and electronic equipment) will be appropriately marked on reader and box. Keypad Configuration Setting Options 5 For Keypad readers only For Keypad readers only For Keypad readers only For Keypad readers only For Keypad readers only For Keypad readers only Optional US Government (FIPS20) Format (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) Optional Custom 6 -XXXX Y -XXXX Y -XXXX Y -XXXX Y -XXXX Y -XXXX Y -XXXX Y -XXXX Y September 9, HID Global Corporation. All rights reserved Page 40 of 7

41 3.56 MHz How to Order Guide D00529, B.8 HADP/OSDP iclass Readers Card Reader Description iclass R5 Contactless Smart Card Reader HADP/OSDP Enabled Mullion Mount Read-Only, RoHS Compliant iclass R30 Contactless Smart Card Reader HADP/OSDP Enabled European and Asian Back Box Mount Read-Only, RoHS Compliant iclass R40 Contactless Smart Card Reader HADP/OSDP Enabled US, European and Asian Back Box Mount Read-Only, RoHS Compliant iclass RK40 Contactless Smart Card Keypad Reader HADP/OSDP Enabled US, European and Asian Back Box Mount Read-Only, RoHS Compliant iclass RKL55 Contactless Smart Card LCD/Keypad Reader HADP/OSDP Enabled US, European and Asian Back Box Mount Read-Only, RoHS Compliant Base Part No Current Rev No* 642 A 62 B 622 B 632 B 672 B Color Options G = Charcoal Gray K = Black G = Charcoal Gray K = Black G = Charcoal Gray K = Black G = Charcoal Gray K = Black G = Charcoal Gray K = Black Hardware Options 7 P = Terminal Strip with HADP/OSDP (RS485) Module P = Terminal Strip with HADP/OSDP (RS485) Module P = Terminal Strip with HADP/OSDP (RS485) Module P = Terminal Strip with HADP/OSDP (RS485) Module P = Terminal Strip with HADP/OSDP (RS485) Module Configuration Settings Options iclass Security 0 P Q 0 P Q 0 P Q 0 P Q 0 P Q MIFARE CSN Z A C D F G H I J Z A C D F G H I J Z A C D F G H I J Z A C D F G H I J Z A C D F G H I J Keypad Configuration For keypad readers only For keypad readers only For keypad readers only Optional US Government (FIPS20) N/A G3.0 N/A G3.0 N/A G3.0 N/A G3.0 N/A G3.0 Optional Custom -XXXXY -XXXXY -XXXXY -XXXXY -XXXXY *Revision numbers and availability are subject to change without notice. Consult factory for availability. Configuration Setting Options are as follows (Factory or Field Configurable): 00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green 0 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green 02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green 2 iclass Security Options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management. 0 = Standard (Reads all iclass cards with unique keys diversified from HID master key) = Elite Key (Reads only iclass cards with unique keys diversified from matching site specific master key; consult factory for availability) P = Standard with OSDP Tamper enabled Q = Elite with OSDP Tamper enabled 3 MIFARE Card Serial Number (CSN) Wiegand Output Modes are as follows (Factory or Field Configurable): Refer to the "iclass Reader Wiegand Output Configuration Guide for more details. 0 = 32 bit = 32 bit reverse (Same as 6055A and 6055BXX00) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Z = CSN Suppressed 4 FIPS20 (USA Government Smart Card) Formats: 7 = 200 bit, 8 = 64 bit, MSB, 9 = 64 bit, LSB, A = 40 bit, MSB, C = 40 bit, LSB, D = 75 bit GSA, F = HMAC bit, G = HMAC + 40 bit MSB, H = HMAC + 64 bit MSB, I = 80 bit combined, J = 32 bit HMAC For more information on the FIPS20 outputs, please refer to the output selection guide: (For additional outputs, expiration date, GUID, TWIC please contact HID for a Command Card). 5 Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options: 00 = Buffer one key, no parity, 4 bit message 09 = Buffer one key, add compliment, 8 bit message (Dorado) 0 = Buffer six keys and add parity = Buffer one key and add parity 4 = Buffer one to five keys (Standard 26 bit output) 9 = Buffer four keys and add parity 22 = Local PIN Verify. Requires User PIN code to be programmed into the iclass Credential at the factory or by using the iclass Card Programmer (please consult factory for availability.) 6 Contact Factory for pricing, availability, and minimum order quantity. 7 The HADP/OSDP communication modules allow host driven communication using HADP (HID Advanced Device Protocol) / OSDP (Open Supervised Device Protocol) over an RS485 (Half-Duplex) hardware interface. Readers that are RoHS compliant (RoHS = Restriction of the use of certain hazardous substances in electrical and electronic equipment) will be appropriately marked on reader and box. September 9, HID Global Corporation. All rights reserved Page 4 of 7

42 3.56 MHz How to Order Guide D00529, B.8 bioclass Reader/Enroller, Reader-Only and Read/Write Biometric Reader Part Numbers and Options Card Reader Description Base Part No. Current Rev. No.* Color Options Hardware Options 8 Configuration Setting Options iclass Security 2 MIFARE CSN 3 Wiegand Output Mode Keypad Configuration Setting Options 4 Optional Custom 5 iclass RKLB57 Contactless Smart Card Biometric Reader/Enroller: Reader with LCD, Keypad, and fingerprint biometric module US, European and Asian Back Box Mount (Wiegand Output) Read Only, RoHS Compliant 680 B K = Black R = Reader/Enroller C D 0 2 C D 0 = N/A XXXX Y iclass RKLB57 Contactless Smart Card Reader: with LCD, Keypad, and fingerprint biometric module US, European and Asian Back Box Mount (Wiegand Output) Read Only, RoHS Compliant (C&D Output) Requires reader/enroller or CP575A for enrolling fingerprint templates B K = Black T = Terminal Strip = N/A XXXX Y iclass RWKLB575 Contactless Smart Card Reader/Writer: Read/Write, with LCD, Keypad, and fingerprint biometric module US, European and Asian Back Box Mount Wiegand Output, and/or RS-232, RS-485, USB or UART Requires reader/enroller or CP575A for enrolling fingerprint templates. 68 B K = Black (All Terminal Strip) T = RS232 4 = RS485 (Full-Duplex) U = USB B = Uart to Uart C D 0 = N/A XXXX Y iclass BIO500 6 fingerprint biometric module upgrade (Sensor Only) 690 B K = Black N = None 00 0 = N/A 0 = N/A 00 N/A *Revision numbers and availability are subject to change without notice. Consult factory for availability. Configuration Setting Options are as follows (Factory or Field Configurable): 00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green 0 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green 02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green 2 iclass Security options (Factory or Field Configurable) 0 = Standard; protects access and biometric applications (Reads/Enrolls all iclass cards with unique keys diversified from HID master key) = Elite; protects access and biometric applications (Reads/Enrolls only iclass cards with site-specific Elite key; consult factory for availability) 2 = Bio-Elite Key; protects biometric application (Reads/Enrolls only iclass cards with site-specific Bio-Elite key; consult factory for availability) C = Standard with Open Collector Tamper enabled D = Elite with Open Collector Tamper enabled 3 MIFARE Card Serial Number (CSN) Wiegand Output Modes are as follows (Factory or Field Configurable): 0 = 32 bit = 32 bit reverse (Same as 6055A and 6055BXX00) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Refer to the "iclass Reader Wiegand Output Configuration Guide for more details. 4 Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options: 00 = Buffer one key, no parity, 4 bit message 09 = Buffer one key, add compliment, 8 bit message (Dorado) 0 = Buffer six keys and add parity = Buffer one key and add parity 4 = Buffer one to five keys (Standard 26 bit output) 9 = Buffer four keys and add parity 22 = Local PIN Verify. Requires User PIN code to be programmed into the iclass Credential by using Reader/Enroller or CP575A. 5 Contact Factory for pricing, availability, and minimum order quantity. 6 BIO500 fingerprint biometric module upgrade is compatible with the RWKL550 iclass LCD Keypad Reader only. 7 In addition to RKLB57 reader only (680BKT), this part provides additional enrollment capabilities and multi-lingual support. Reader/Enroller is field configurable for one of the following behaviors: reader/enroller, readeronly or enroller-only, and field configurable for one of 0 languages (see datasheet for more information). This product replaces CP575 fingerprint template enroller (no longer available). 8 All the following communication modules allow host driven communication using the iclass Serial Protocol. All the following communication modules (except USB) allow for card ID reporting instantiated by the reader. Readers that are RoHS compliant (RoHS = Restriction of the use of certain hazardous substances in electrical and electronic equipment) will be appropriately marked on reader and box. September 9, HID Global Corporation. All rights reserved Page 42 of 7

43 3.56 MHz How to Order Guide D00529, B.8 iclass OEM50 Module Part Numbers and Options OEM Modules Description iclass OEM 50 Read/Write Module, Read/Write: Circuit Card Assembly, Wiegand and/or TTL Output Dimensions:.200" X.00" X 0.272" (3.048 cm X cm X 0.69 cm) (RoHS Compliant) Base Part No. Current Rev. No.* Color Options Hardware Options Configuration Setting 33 A N = None N=None 00 iclass Security 0 C D MIFARE CSN 2 Wiegand Output Mode Z Optional Custom 3 -XXXX Y OEM Modules Antenna Description iclass OEM 50 Antenna, Circuit Card Assembly: Dimensions: 3.50" X 3.50" X 0.062" (8.00 cm X 8.00 cm X 0.58 cm) (RoHS Compliant) iclass OEM 50 Antenna, Circuit Card Assembly: Dimensions:.900" X.350" X 0.062" (4.826 cm X cm X 0.58 cm) (RoHS Compliant) Base Part No. Current Rev. No.* 332 A 333 A Hardware Options A = Air Tuned N = Not Tuned A = Air Tuned N = Not Tuned *Revision numbers and availability are subject to change without notice. Consult factory for availability. iclass Security Options (Factory or Field Configurable): 0 = Standard (Reads all iclass cards with unique keys diversified from HID master key) = High Security, Custom, not valid with FIPS20 options (Reads only iclass cards with unique keys diversified from matching site specific master key; consult factory for availability) C = Standard with Open Collector Tamper enabled D = Custom with Open Collector Tamper enabled See Application Note Number 28 for additional information on Key Management. 2 MIFARE Card Serial Number (CSN) Wiegand Output Modes are as follows (Factory or Field Configurable): 0 = 32 bit = 32 bit reverse (Same as 6055A and 6055BXX00) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Z = CSN Suppressed Refer to the "iclass Reader Wiegand Output Configuration Guide for more details. 3 Contact Factory for pricing, availability, and minimum order quantity. Readers that are RoHS compliant (RoHS = Restriction of the use of certain hazardous substances in electrical and electronic equipment) will be appropriately marked on reader and box. September 9, HID Global Corporation. All rights reserved Page 43 of 7

44 3.56 MHz How to Order Guide D00529, B.8 iclass OEM75 Module Part Numbers OEM75 Module Description Base Part No. Current Rev. No. Connectors Card Application / Sector Options Feature Bundle 2 Optional Config Suffix 3 iclass OEM75 Read/Write Module Circuit Card Assembly 3.56 MHz iclass or MIFARE Contactless Smart Card Module Dimensions:." x.2 (2.8cm x 3.0cm) Size Similar to: OEM50 (RoHS Compliant) 34 A D = None S = iclass or MIFARE N = iclass Only - A0 = iclass A02 = iclass & FIPS 20 B0 = MIFARE B02 = MIFARE & FIPS 20 - xxxxxx iclass OEM75 Read/Write Module Circuit Card Assembly 3.56 MHz iclass or MIFARE Contactless Smart Card Module Dimensions:.3" x.7 (3.3cm x 4.3cm) Size Similar to: eprox Lock (RoHS Compliant) 34 A A = Pwr/Int/Ant E = Pwr/Int S = iclass or MIFARE N = iclass Only - A0 = iclass A02 = iclass & FIPS 20 B0 = MIFARE B02 = MIFARE & FIPS 20 - xxxxxx None = No Connector Options, Pwr/Int/Ant = Power, Interface and Antenna Connector (3 connectors in total), Pwr/Int = Power and Interface (2 connectors in total). 2 The feature bundle is the set of firmware/ applications that is downloaded onto the module hardware. In the field it is possible to download the required feature bundle to the module to fit the card population. B0 and B02 Feature Bundles cannot be applied to the "iclass Only" option (see Card Application/Sector Options). 3 An optional configuration suffix is appended to any base parts that require non-default module/feature bundle configuration. If default configuration of the module/feature bundle is all that is required, the optional suffix need not be appended. For a list of non-default configuration suffixes consult the OEM75 Configuration Guide ( September 9, HID Global Corporation. All rights reserved Page 44 of 7

45 3.56 MHz How to Order Guide D00529, B.8 iclass OEM75 Antenna Part Numbers OEM75 Antenna Description Base Part No. Current Rev. No. Tuning iclass OEM75 Antenna Circuit Card Assembly Dimensions:.5" x 3.3 (3.8cm x 8.3cm) Size Like: OEM50 R0 (p/n 335B) FIPS 20 Compliant Capable (RoHS Compliant) 342 A A = Air Tuned N = Non-Tuned iclass OEM75 Antenna Circuit Card Assembly Dimensions: 0.9" x.5 (2.4cm x 3.8cm) Size Like: eprox Lock 25 khz Antenna (RoHS Compliant) 344 A A = Air Tuned N = Non-Tuned iclass OEM75 Antenna Circuit Card Assembly Dimensions:.5" x.7 (3.9cm x 4.4cm) Size Like: New size (RoHS Compliant) 346 A A = Air Tuned N = Non-Tuned iclass OEM75 Antenna Circuit Card Assembly Dimensions: 3." x 3. (8.0cm x 8.0cm) Size Like: OEM50 Large (p/n 332A) FIPS 20 Compliant Capable (RoHS Compliant) 348 A A = Air Tuned N = Non-Tuned iclass OEM75 Antenna Circuit Card Assembly Dimensions:.3" x.9 (3.4cm x 4.8cm) Size Like: OEM50 Small (p/n 333A) (RoHS Compliant) 353 A A = Air Tuned N = Non-Tuned Ability to read FIPS 20 cards depends on the environment. Any metal near the antenna impacts the ability to read FIPS 20 cards. September 9, HID Global Corporation. All rights reserved Page 45 of 7

46 3.56 MHz How to Order Guide D00529, B.8 iclass OEM75 Accessory Part Numbers OEM75 Accessory Description iclass OEM75 Antenna Cable, 4.5 For Use With: 34AD or 34AE Bare wire connections on both ends iclass OEM75 Antenna Cable, 4.0 For Use With: 34AA Bare wire connection on one end, OEM75 cable connector on the other end iclass OEM75 Communication & Power Cable For Use With: 34AA, 34AE Ribbon cable with 8 Position male connectors for connection to OEM75 and host iclass OEM75 Communication Cable For Use With: 34AA, 34AE Ribbon cable with 9 Position male connectors for connection to OEM75 and host iclass OEM75 8 Position Female Connector For Use With: Position female connector for use on host board iclass OEM75 9 Position Female Connector For Use With: Position female connector for use on host board Parts can alternatively be sourced through other vendors. Alternate part numbers are (Molex) and (Tyco) 2 Parts can alternatively be sourced through other vendors. Alternate part numbers are (Molex) and (Tyco) iclass OEM75 Packaged Part Numbers OEM75 Package Description OEM75 Read/Write Module Circuit Card Assembly, iclass or MIFARE (Singular p/n 34ADS-A0) OEM75 Antenna (Singular p/n 353AA) Base Part No Base Part No OEM75 Antenna Cable (Singular p/n ) September 9, HID Global Corporation. All rights reserved Page 46 of 7

47 3.56 MHz How to Order Guide D00529, B.8 iclass & multiclass OEM 50 Module Part Numbers and Options OEM50 Module Description iclass OEM50 Read Only Module Circuit Card Assembly Wiegand or Clock-and-Data Output Dimensions: 2.44" x.02" x 0.35" (6.200 cm x cm x cm) (RoHS Compliant) iclass OEM50 Read/Write Module Circuit Card Assembly 6 Wiegand Output Dimensions: 2.44" x.02" x 0.35" (6.200 cm x cm x cm) (RoHS Compliant) multiiclass OEM50 Combination Circuit Card Assembly HID/AWID or Indala Prox (25KHz) & iclass (3.56MHz) Read-Only Multi-technology Module Wiegand or Clock-and-Data Output Dimensions: 2.44" x.02" x 0.35" (6.200 cm x cm x cm) (RoHS Compliant) Base Part No Current Rev No* Color Options 32 B N = None N = None 32 B N = None 32 B N = None Hardware Options 2 = RS232 4 = RS485 (Full-Duplex) U = USB B = UART H = HID AWID Module D = Indala Proximity Module 7 Configuration Settings 00 = Wiegand 0 = Clock-and-Data 00 = None 00 = Wiegand 0 = Clock-and-Data iclass Security 0 C D 0 C D 0 C D MIFARE CSN Z A C D F G H I J Z A C D F G H I J Z A C D F G H I J Optional U.S. Government (FIPS20) N/A G3.0 N/A G3.0 N/A G3.0 Optional Custom -XXXXY -XXXXY -XXXXY OEM Modules Antenna Description Base Part No. Current Rev. No.* Tuning Options iclass/multiclass OEM MHz Antenna Circuit Card Assembly. R0 Size A N = Non-Tuned 335 Dimensions: 3.267" x.496" x 0.062" (8.300 cm x cm x 0.60 cm) (RoHS Compliant) B A = Air Tuned iclass/multiclass OEM MHz Antenna Circuit Card Assembly. R40 Size A N = Non-Tuned 336 Dimensions: 3.583" x 2.677" x 0.062" (9.800 cm x cm x 0.60 cm) (RoHS Compliant) B A = Air Tuned multiclass OEM50 25KHz Proximity Antenna Dimensions: 2.22" x.43" x.093 (5.64 cm x 3.63 cm x.236 cm) (RoHS Compliant) multiclass OEM50 25KHz Proximity Antenna Dimensions: 2.56" x.0" x.050 (6.50 cm x 2.79 cm x.27 cm) (RoHS Compliant) *Revision numbers and availability are subject to change without notice. Consult factory for availability. iclass Security Options (Factory or Field Configurable): 0 = Standard (Reads all iclass cards with unique keys diversified from HID master key) = High Security, Custom, not valid with FIPS20 options (Reads only iclass cards with unique keys diversified from matching site specific master key; consult factory for availability) C = Standard with Open Collector Tamper enabled D = Custom with Open Collector Tamper enabled See Application Note Number 28 for additional information on Key Management. 2 MIFARE Card Serial Number (CSN) Wiegand Output Modes are as follows (Factory or Field Configurable): 0 = 32 bit = 32 bit reverse (Same as 6055A and 6055BXX00) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Z = CSN Suppressed Refer to the "iclass Reader Wiegand Output Configuration Guide for more details. 3 FIPS20 (USA Government Smart Card) Formats: 7 = 200 bit, 8 = 64 bit, MSB, 9 = 64 bit, LSB, A = 40 bit, MSB, C = 40 bit, LSB, D = 75 bit GSA, F = HMAC bit, G = HMAC + 40 bit MSB, H = HMAC + 64 bit MSB, I = 80 bit combined, J = 32 bit HMAC For more information on the FIPS20 outputs, please refer to the output selection guide: (For additional outputs, expiration date, GUID, TWIC please contact HID for a Command Card). 4 Contact Factory for pricing, availability, and minimum order quantity. 5 Expansion Modules Available for Additional Serial Interface Capability 6 All the following communication modules allow host driven communication using the iclass Serial Protocol. All the following communication modules (except USB) allow for card ID reporting instantiated by the reader. For RS485 (Half-Duplex) compliancy, see iclass HADP/OSDP Readers. Readers that are RoHS compliant (RoHS = Restriction of the use of certain hazardous substances in electrical and electronic equipment) will be appropriately marked on reader and box. 7 Desired Indala format must accompany the order. For FlexEnterprise formats (non-open,) a format authorization must accompany every order. September 9, HID Global Corporation. All rights reserved Page 47 of 7

48 3.56 MHz How to Order Guide D00529, B.8 Expansion Modules for Communication and Proximity Card Support Expansion Module Description Base Part No. Current Rev. No.* iclass Communications Expansion Module, RS232 or UART Dimensions:.02" x 0.886" x 0.437" (2.800 cm x cm x.0 cm) Works with (terminal strip readers): R0, R5, R30, R40, RK40, RKL55, RKLB57 Works with (modules): OEM50 Protocol: Compliant with iclass Serial Protocol Use: Upgrade read-only reader/module to reader/writer 322 A N iclass Communications Expansion Module, RS485 (Full-Duplex) Dimensions:.02" x 0.886" x 0.437" (2.800 cm x cm x.0 cm) Works with (terminal strip readers): R0, R5, R30, R40, RK40, RKL55, RKLB57 Works with (modules): OEM50 Protocol: Compliant with iclass Serial Protocol Use: Upgrade read-only reader/module to reader/writer iclass Communications Expansion Module, RS485 (Half-Duplex) Dimensions:.260 x x (3.200 cm x cm x.650 cm) Works with (terminal strip readers): R5, R30, R40, RK40, RKL55 Works with (modules): OEM50 Protocol: Compliant with HADP/OSDP Use: Enable HADP/OSDP on reader/module iclass Communications Expansion Module, USB Dimensions:.02" x 0.886" x 0.437" (2.800 cm x cm x.0 cm) Works with (terminal strip readers): R0, R5, R30, R40, RK40, RKL55, RKLB57 Works with (modules): OEM50 Protocol: Compliant with iclass Serial Protocol Use: Upgrade read-only reader/module to reader/writer iclass Proximity (25KHz) Expansion Module, HID Prox and AWID (Embedded) 2 Dimensions:.47" x 0.886" x 0.256" (3.600 cm x cm x.65 cm) Works with (terminal strip readers): none Works with (modules): OEM50 Features: Reads HID Prox and AWID cards Use: Upgrade read-only 3.56MHz OEM50 Revision B (32B) iclass Proximity (25KHz) Expansion Module, HID Prox and AWID (RP Reader) Dimensions:.47" x 0.886" x 0.256" (3.600 cm x cm x.65 cm) Works with (RP readers): RP5, RP40, RPK40 Works with (modules): none Features: Reads HID Prox and AWID cards Use: Field swap of existing proximity expansion modules iclass Proximity (25KHz) Expansion Module, Indala Proximity (Embedded) 23 Dimensions:.47" x 0.886" x 0.276" (3.600 cm x cm x.70 cm) Works with (terminal strip readers): none Works with (modules): OEM50 Features: Reads Indala Proximity Cards Use: Upgrade read-only 3.56MHz OEM50 Revision B (32B) iclass Proximity (25KHz) Expansion Module, Indala Proximity (RP Reader) 3 Dimensions:.47" x 0.886" x 0.276" (3.600 cm x cm x.70 cm) Works with (RP readers): RP5, RP40, RPK40 Works with (modules): none Features: Reads Indala Proximity Cards Use: Field swap of existing proximity expansion modules Applies solely to Revision B iclass readers with plastic backplates (upper assembly ) and OEM50 Revision B (32B). 2 Applies solely to OEM50 Revision B (32B). 3 Desired Indala format must accompany the order. For Flex Enterprise formats (non-open,) a format authorization must accompany every order. Color Options E = RS232 B = UART Hardware Options Configuration Setting A Configuration Setting B A N E = Standard A N M = HADP / OSDP A N E = Standard B N M = Embedded Connections B N E = RP Reader Connections A N M = Embedded Connections A N E = RP Reader Connections September 9, HID Global Corporation. All rights reserved Page 48 of 7

49 3.56 MHz How to Order Guide D00529, B.8 Reader Wiegand Output Configuration Guide MIFARE CSN, 2 Wiegand Data Output formats Comments Model Number 3, 4 Any HID/OEM format. As encoded into the iclass card by HID factory or field programmer. All models 32-bit, MIFARE Card Serial Number. For MIFARE Cards only, random number burned into card chip. XXXXBXX0000YY 32-bit, MIFARE Card Serial Number, reverse output. 26-bit, derived from MIFARE Card Serial number. For MIFARE Cards only, reverse output matches HID MIFARE Reader base model number: 6055A and 6055BXX00 For MIFARE Cards only, ID = 6 lower bits of CSN. Reader generates fixed FC - defaults to 00, but can be factory or field configured. XXXXBXX000YY XXXXBXX0002YY 34-bit, MIFARE Card Serial number plus beginning/ending parity. For MIFARE Cards only XXXXBXX0003YY 40-bit, MIFARE Card Serial number plus 8-bit checksum. For MIFARE Cards only, Checksum per Philips standard. XXXXBXX0004YY 37 bit, derived from MIFARE Ultralight or DESFire Card Serial Number For Ultralight or DESFire Cards only, 37 lower bits of CSN in reverse order (Keypad Readers Only) 6XXBXX0005YY 56 bit, MIFARE Ultralight or DESFire Card Serial Number For Ultralight or DESFire Card Only, 56 bit CSN in reverse order (Keypad Readers Only) 6XXBXX0006YY FIPS20 (USA Government Smart Card) Wiegand Data Output formats Low Level 5 Comments Model Number 3, bit, FIPS20 output Output as defined by USA Government Smart Card Specification XXXXBXXXXX7YY-G bit, MSB First FIPS20 output Output as defined by USA Government Smart Card Specification XXXXBXXXXX8YY- G bit, LSB First FIPS20 output Output as defined by USA Government Smart Card Specification XXXXBXXXXX9YY- G bit, MSB FIPS20 output Output as defined by USA Government Smart Card Specification XXXXBXXXXXAYY- G bit, LSB FIPS20 output Output as defined by USA Government Smart Card Specification XXXXBXXXXXCYY- G3.0 HMAC bit, FIPS20 output Output as defined by USA Government Smart Card Specification XXXXBXXXXXFYY-G3.0 HMAC + 40 bit MSB, FIPS20 output Output as defined by USA Government Smart Card Specification XXXXBXXXXXGYY- G3.0 HMAC + 64 bit MSB, FIPS20 output Output as defined by USA Government Smart Card Specification XXXXBXXXXXHYY- G bit combined, FIPS20 output Output as defined by USA Government Smart Card Specification XXXXBXXXXXIYY-G bit HMAC, FIPS20 output Output as defined by USA Government Smart Card Specification XXXXBXXXXXJYY- G3.0 Notes:. MIFARE CSN = Card Serial Number, a 32-bit random number burned into the chip by the chip manufacturer (not HID). 2. iclass 64 bit CSN is never transmitted via the Wiegand Output. See HID Application Note Number 28 for details. 3. XX = Indicates model variations, color and hardware options. Refer to the iclass "How to Order Guide" for complete ordering instructions. 4. YY = Indicates Keypad Configuration Setting Options for iclass Keypad Readers Only. 5. Must use the -G2.0 suffix when ordering a FIPS20 Wiegand Data Output Format, (28 bit output is configurable with a Command Card) All trademarks and registered trademarks are the properties of their respective companies. September 9, HID Global Corporation. All rights reserved Page 49 of 7

50 3.56 MHz How to Order Guide, D00529, B.8 Programmer Ordering Guide 350BNN00 (Model: CP400 w/standard Security) Description: Programmer for HID 3.56MHz iclass Programmable RFID Standard Security 5 Transponders/Cards/Keys/Tags, with CD-ROM and diskette containing programmer software and plug-in power supply. 350BNH00 (Model: CP400 w/high Security) Description: Programmer for HID 3.56MHz iclass Programmable RFID High Security 5 Transponders/Cards/Keys/Tags, with CD-ROM and diskette containing programmer software and plug-in power supply. 6250ANN00 (Model: CP575A) Description: The CP575A programmer includes CP400 features with the added capability of programming biometric templates for use in our bioclass reader (RWKLB575) and includes a bioclass reader/writer, personalization diskette, universal power supply and USB cable. 375BNN00 (Only requires section 3 to be completed) Description: iclass SDK (Software Development Kit). Includes RW400 Reader/Writer stand mounted, RS232 connector, power supply, sample cards, and software development tools CD. (This product requires a license agreement and cannot be transferred or resold to a third party.) Section : To upgrade 4 an existing iclass Programmer please provide: HID Part Number: x Serial Number:. Software Name:. (Software name can be found on the Customer Specific Files Diskette) Section 2: Please specify the following, 2 : A - Format Number #. Facility Code Range, or specific Facility Code. Card Number Range (Start and Stop). B - Format Number # 2 (If required). Facility Code Range, or specific Facility Code. Card Number Range (Start and Stop). Section 3: Customer must also identify the final user of the iclass Programmer to HID 3 : Company Name:. Contact Name:. Address:. Phone #:. Fax #:. Address:. Only formats authorized for use by your company can be ordered. For HID Format Numbers, please contact HID Customer Service. Consult factory for a list of programmable RFID Transponders/Cards/Tags that can be programmed with this Programmer. 2 For Corporate 000 Format, iclass Elite Format, and Custom Facility Code & Card Number Range Programmers, please contact Customer Service for availability, lead times, and pricing. 3 To ensure security of the format and cards, a Software License Agreement must be signed by the final user of the iclass Programmers and iclass SDK, and be on file at HID prior to shipment. 4 Software License Agreement does not apply to iclass Programmer upgrades. 5 Find the difference between Standard and High Security iclass Cards and Readers, see CP400 Security FAQ.. September 9, HID Global Corporation. All rights reserved Page 50 of 7

51 3.56 MHz How to Order Guide, D00529, B.8 SmartID Readers SmartID Single-Technology 3.56MHz Readers Part Numbers and Options GEN 2 Card Reader Description Base Part No. Current Rev. No. Color Options Application SmartID S0 Contactless Smart Card Reader Mullion Mount, Terminal Strip Wiegand, Clock-and-Data, RS232, RS485 or RS422 (RoHS Compliant) 8030 D S = Silver HM = HID MIFARE (default) HC = HID MIFARE (non-default) CM = MIFARE DM = Dual MIFARE DF = DESFire PV = FIPS 20 PIVII SmartID SW00 Contactless Smart Card Reader/Writer Mullion Mount, Terminal Strip Host driven RS232, RS485 or RS422 (RoHS Compliant) 8030 D S = Silver TC = T/CL Protocol RW = 3964 Protocol (Legacy) SmartID SK0 Contactless Smart Card Keypad Reader Mullion Mount, Terminal Strip Wiegand, Clock-and-Data, RS232, RS485 or RS422 (RoHS Compliant) 803 D S = Silver HM = HID MIFARE (default) HC = HID MIFARE (non-default) CM = MIFARE DM = Dual MIFARE DF = DESFire PV = FIPS 20 PIVII SmartID SWK00 Contactless Smart Card Keypad Reader/Writer Mullion Mount, Terminal Strip Host driven RS232, RS485 or RS422 (RoHS Compliant) 803 D S = Silver TC = T/CL Protocol RW = 3964 Protocol (Legacy) All part numbers generated by the above grid (except HM = HID MIFARE) require an additional accompanying format configuration. The format configuration is a separate part number that is combined on a PO with the above part number to make up the full definition of a reader. Format configurations are either generic (for public use) or custom. For generic format information, see SmartID Generic Configuration Document ( For custom format definition, see Custom SmartID Format, MIFARE or DESFire Requirements on subsequent page. For more information on applications and format configurations, reference the whitepaper SmartID Application and Configurations ( The HM application provides standard reader configurations, including beeper and LEDs. The HC application allows for configuration of beeper and LEDs. September 9, HID Global Corporation. All rights reserved Page 5 of 7

52 3.56 MHz How to Order Guide, D00529, B.8 SmartTRANS Multi-Technology Readers Part Numbers and Options GEN 2 (3.56 MHz & 25 khz) Card Reader Description Base Part No. Current Rev. No. Color Options Application SmartID SP0 Multi-Technology Contactless Smart Card and Prox Reader HID Prox and AWID (25kHz) Mullion Mount, Terminal Strip Wiegand, Clock-and-Data, RS232, RS485 or RS422 (RoHS Compliant) 800 D S = Silver HM = HID MIFARE (default) HC = HID MIFARE (non-default) CM = MIFARE DF = DESFire PV = FIPS 20 PIVII SmartID SPK0 Multi-Technology Contactless Smart Card and Prox Keypad Reader HID Prox and AWID (25kHz) Mullion Mount, Terminal Strip Wiegand, Clock-and-Data, RS232, RS485 or RS422 (RoHS Compliant) 80 D S = Silver HM = HID MIFARE (default) HC = HID MIFARE (non-default) CM = MIFARE DF = DESFire PV = FIPS 20 PIVII All part numbers generated by the above grid (except HM = HID MIFARE) require an additional accompanying format configuration. The format configuration is a separate part number that is combined on a PO with the above part number to make up the full definition of a reader. Format configurations are either generic (for public use) or custom. For generic format information, see SmartID Generic Configuration Document ( For custom format definition, see Custom SmartID Format, MIFARE or DESFire Requirements on subsequent page. For more information on applications and format configurations, reference the whitepaper SmartID Application and Configurations ( The HM application provides standard reader configurations, including beeper and LEDs. The HC application allows for configuration of beeper and LEDs. SmartTOUCH Biometric Readers Part Numbers and Options - GEN Card Reader Description Part No. Prefix Base Part No. Application SmartID SB0 Indoor Contactless Smart Card Reader with Biometrics Fingerprint reader matches templates stored on 3.56MHz credentials Mullion Mount, Terminal Strip Wiegand, Clock-and-Data, RS232, RS485 or RS422 (RoHS Compliant) = MIFARE 2 = DESFire SmartID SBK0 Indoor Contactless Smart Card Keypad Reader with Biometrics Fingerprint reader matches templates stored on 3.56MHz credentials Mullion Mount, Terminal Strip Wiegand, Clock-and-Data, RS232, RS485 or RS422 (RoHS Compliant) = MIFARE 7 = DESFire All part numbers generated by the above grid require an additional accompanying format configuration. The format configuration is a separate part number that is combined on a PO with the above part number to make up the full definition of a reader. Format configurations are either generic (for public use) or custom. For generic format information, see SmartID Generic Configuration Document ( For custom format definition, see Custom SmartID Format, MIFARE or DESFire Requirements on subsequent page. For more information on applications and format configurations, reference the whitepaper SmartID Application and Configurations ( September 9, HID Global Corporation. All rights reserved Page 52 of 7

53 3.56 MHz How to Order Guide, D00529, B.8 SmartTOOLS Card Programming Software and Devices Part Numbers and Options Card Reader Description Part No. Prefix Base Part No. SmartID CP00 ProxBurn MIFARE Card and Tag Programmer Software and RS232 Desktop Card Programmer (RoHS Compliant) SmartID CP0 ReaderTOOLS Configuration Card Programmer Software and USB Desktop Card Programmer (RoHS Compliant) Prior to purchase, customer must sign a software license agreement 2 Prior to purchase, customer must sign a software license agreement and NDA September 9, HID Global Corporation. All rights reserved Page 53 of 7

54 3.56 MHz How to Order Guide, D00529, B.8 SmartID Single-Technology Reader Part Numbers and Options - GEN Contactless Smart Card Reader, Mullion Mount Size, Terminal Strip * SmartID S0 Read Only, CSN (MIFARE) * SmartID S0 Read Only, MIFARE * SmartID S0 Read Only, DUAL MIFARE * SmartID S0 Read Only, DESFIRE * SmartID S0 Read Only, PIVII (FIPS 20 end-point compliant), GSA Approved TC* SmartID SW00 Reader/Writer, MIFARE & ISO DESFire & SmartMX, T=CL Protocol Contactless Smart Card Keypad Reader, Mullion Mount Size, Terminal Strip * SmartID SK0 Read Only, MIFARE * SmartID SK0 Read Only, DUAL MIFARE * SmartID SK0 Read Only, DESFIRE * SmartID SK0 Read Only, PIVII (FIPS 20 end-point compliant), GSA Approved TC* SmartID SWK00 Reader/Writer, MIFARE & ISO DESFire & SmartMX, T=CL Protocol SmartTRANS Multi-Technology Reader Part Numbers and Options - GEN Multi Technology Reader, HID Prox, Mullion Mount Size, Terminal Strip CM* DF* SmartTRANS SP0 Read Only, MIFARE SmartTRANS SP0 Read Only, DESFire * SmartTRANS SP0 Read Only, PIVII (FIPS20 end-point compliant), GSA Approved Multi Technology Keypad Reader, HID Prox, Mullion Mount Size, Terminal Strip CM* DF* SmartTRANS SPK0 Read Only, MIFARE SmartTRANS SPK0 Read Only, DESFire * SmartTRANS SPK0 Read Only, PIV (FIPS 20 end-point compliant,) GSA approved SmartID Desktop Reader/Writer Part Numbers and Options - GEN Contactless Smart Card Reader/Writer, Desktop, USB and RS * * SmartID SWD00 Reader/Writer, MIFARE & ISO DESFire & SmartxMX, USB with PC/SC Protocol SmartID SWD00 Reader/Writer, MIFARE & ISO DESFire & SmartxMX, RS232 with T=CL Protocol To complete the part number, specify formatting information. For generic format information, see SmartID Generic Configuration Document ( ( For custom format definition, see Custom Format MIFARE or DESFire Reader Ordering Guide. September 9, HID Global Corporation. All rights reserved Page 54 of 7

55 3.56 MHz How to Order Guide, D00529, B.8 SmartID Reader Cross Reference GEN & 2 Generation Generation 2 Part Number Description Part Number Description ISO Mifare Sector ISO DESFire reader with MIFARE configuration 8030DSCM SmartID S0 Read Only, Custom MIFARE ISO Mifare PIN Reader ISO DESFire PIN reader with MIFARE configuration 803DSCM SmartID SK0 Read Only Keypad, Custom MIFARE ISO DESFire reader ISO DESFire reader (FIPS 20 mid point compliant) ISO DESFire and MIFARE reader (FIPS 20 mid point compliant) 8030DSDF SmartID S0 Read Only, DESFIRE ISO DESFire PIN reader ISO DESFire PIN reader (FIPS 20 mid point compliant) ISO DESFire and MIFARE PIN reader (FIPS 20 mid point compliant) 803DSDF SmartID SK0 Read Only Keypad, DESFIRE ISO Dual Mifare reader 8030DSDM SmartID S0 Read Only, DUAL MIFARE ISO Dual Mifare PIN reader 803DSDM SmartID SK0 Read Only Keypad, DUAL MIFARE ISO reader (ISO 786-4, PIV II Compliant) 8030DSPV SmartID S0 Read Only, PIVII ISO PINpad reader (ISO 786-4, PIV II Compliant) 803DSPV SmartID SK0 Read Only Keypad, PIVII TC ISO Reader/Writer, T=CL Protocol 8030DSTC TC ISO Reader/Writer with PINpad, T=CL Protocol 803DSTC SmartID SW00 Reader/Writer, MIFARE & ISO DESFire & SmartMX, T=CL Protocol SmartID SW00 Reader/Writer with Keypad, MIFARE & ISO DESFire & SmartMX, T=CL Protocol ISO Reader/Writer, 3964 Protocol 8030DSRW SmartID SW00 Reader/Writer, 3964 Protocol ISO Reader/Writer with PINpad, 3964 Protocol 803DSRW SmartID SW00 Reader/Writer with Keypad, 3964 Protocol CM SmartTRANS reader (ISO 4443 & HID Prox), MIFARE 800DSCM SmartTRANS SP0 Read Only, HID + AWID Prox, Custom MIFARE CM SmartTRANS PINpad reader (ISO 4443 & HID Prox), MIFARE 80DSCM SmartTRANS SPK0 Read Only Keypad, HID + AWID Prox, Custom MIFARE DF SmartTRANS reader (ISO 4443 & HID Prox), DESFire 800DSDF SmartTRANS SP0 Read Only, HID + AWID Prox, Custom DESFire DF SmartTRANS PINpad reader (ISO 4443 & HID Prox), DESFire 80DSDF SmartTRANS SPK0 Read Only Keypad, HID + AWID Prox, Custom DESFire SmartTRANS reader (ISO 4443 & HID Prox), PIVII 800DSPV SmartTRANS SP0 Read Only, HID + AWID Prox, PIVII SmartTRANS PINpad reader (ISO 4443 & HID Prox), PIVII 80DSPV SmartTRANS SPK0 Read Only Keypad, HID + AWID Prox, PIVII All format configurations previously ordered with GEN parts are backward compatible with GEN 2. When ordering GEN 2 product, order using the same format configuration number previously used when ordering GEN product. September 9, HID Global Corporation. All rights reserved Page 55 of 7

56 3.56 MHz How to Order Guide, D00529, B.8 GEN 2 & FlexSmart FlexSmart SmartID Gen 2 Part Number Description Part Number 2 Description 6075AKN0000 FlexSmart HID MIFARE 8030DSHM SmartID S0 Mullion Read Only, HID MIFARE* 6075AKNxxxx FlexSmart HID MIFARE, non default configuration 8030DSHC SmartID S0 Mullion Read Only, HID MIFARE* 607AKN FlexSmart HID MIFARE, Keypad 803DSHM SmartID SK0 Mullion Read Only Keypad, HID MIFARE* 607AKNxxxxxx FlexSmart HID MIFARE, Keypad, non default configuration 803DSHC SmartID SK0 Mullion Read Only Keypad, HID MIFARE* 6076AKNxxxx FlexSmart Custom MIFARE 8030DSCM SmartID S0 Mullion Read Only, Custom MIFARE* 6072AKNxxxxxx FlexSmart Custom MIFARE, Keypad 803DSCM SmartID SK0 Mullion Read Only Keypad, Custom MIFARE* 6077AKNxxxx FlexSmart Custom DESFIRE 8030DSDF SmartID S0 Mullion Read Only, Custom DESFire* 6073AKNxxxxxx FlexSmart Custom DESFIRE, Keypad 803DSDF SmartID SK0 Mullion Read Only Keypad, Custom DESFire* N/A * For wallswitch requirements, this part must be ordered with every reader 8090AS SmartID Single Gang Electrical Box Cover xxxx signifies non-0000 configuration 2 When ordering GEN 2 SmartID product with FlexSmart custom configurations, modify the format reference number (FMxxxx) previously used when ordering FlexSmart product as follows: (a) add 02 to FMxxxx and (b) separate FM and first x with a -. Thus the FlexSmart format configuration FMxxxx turns to 02FM-xxxx when ordering SmartID GEN 2 product. SmartID (GEN 2) & HID MIFARE HID MIFARE SmartID GEN2 Part Number Description Part Number Description 6055Byy0000 HID MIFARE 6055 (used for read only) 8030DSHM SmartID S0 Read Only, HID MIFARE 6055Byyxxxx HID MIFARE 6055 (used for read only) 8030DSHC SmartID S0 Read Only, HID MIFARE (non-default) 6055Byy0000 HID MIFARE 6055 (used for read/write) 8030DSTC SmartID SW00 Read/Write, T=CL Protocol 6055Byy0000 HID MIFARE 6055 (used for read-only and read/write) N/A Not Available 6074Ayy00 HID MIFARE 6074 (Legacy) 8030DSHM SmartID S0 Read Only, HID MIFARE 6074Ayyxx HID MIFARE 6074 (Legacy) 8030DSHC SmartID S0 Read Only, HID MIFARE xxxx signifies non-0000 configuration September 9, HID Global Corporation. All rights reserved Page 56 of 7

57 3.56 MHz How to Order Guide, D00529, B.8 SmartID MIFARE and DESFire Reader Custom Format Request Form Reader Part Numbers: 8030/800 MIFARE or DUAL MIFARE 8030/800 DESFire 803/80 MIFARE or DUAL MIFARE with Keypad 803/80 DESFire with Keypad Description: These custom MIFARE or DESFire readers offer a complete selection of keys and card formats for adding to existing installations or facilitating companies to manage their own keys and formats. This worksheet will help you to gather information that will be required to process orders for these readers. Please specify the following A - Custom Format Number: B - New Custom MIFARE Format: Use MAD (Yes/No): Yes No If Yes, AID (recommended): If No, Sector: Block where data is located: Starting bit: Number of bits to output: Block where data is located (2nd, DUAL Only) Starting bit (2nd, DUAL Only) Number of bits to output (2nd, DUAL Only) Custom Keys (Yes/No): Yes No C - New Custom DESFire Format: Specify APPLICATION to store data: File to store data: Address in file where data is located: Starting bit: Number of bits to output: Custom Keys (Yes/No) : Yes No Security Level: Plain communication Plain communication secured by DES/3DES MACing Fully DES/3DES enciphered communication Communication mode of the file is used September 9, HID Global Corporation. All rights reserved Page 57 of 7

58 3.56 MHz How to Order Guide, D00529, B.8 D - Output format: Clock-and-Data Number of digits: Wiegand Number of bits: Left Parity: Odd Even Calculation First Bit: Last Bit: Right Parity: Odd Even Calculation First Bit: Last Bit: E - Serial Number of chars: Type (RS232/RS485/RS422): Baud rate: User interface: Card reading beep (Yes/No): Yes No Keypad key press beep (Yes/No): Yes No LED, Left: Set LED constant green When combining green and red are combined, the LED will set to yellow. Set LED green when card is read Set LED green when key is stroked Set LED constant red Set LED red when card is read Set LED red when key is stroked LED, Right: Set LED constant green When green and red are combined, the LED will set to yellow. Set LED green when card is read Set LED green when key is stroked Set LED constant red Set LED red when card is read Set LED red when key is stroked Input pin (When active to GND): Used for LED (Left/Right): Left Right LED off LED to Green LED to Red LED to Yellow Input pin 2 (When active to GND): Used for LED (Left/Right): Left Right LED off LED to Green LED to Red LED to Yellow Transfer all keys securely and do not place keys in this Order Guide. All custom formats require additional time to develop and test. Required is a customer sign-off before fulfilling the first order. Once your key is encrypted using the HID Key Wrapper program, please fill-in the following information: Wrapped Keys: Access Key Sector Access Key MAD Wrapping Password (Pass Phrase) : DISTRIBUTE OVER PHONE ONLY Using the HID Key Wrapper program keeps your key secure during order processing. September 9, HID Global Corporation. All rights reserved Page 58 of 7

59 3.56 MHz How to Order Guide, D00529, B.8 FlexSmart Readers FlexSmart Reader Part Numbers and Options Card Reader Description HID FlexSmart MIFARE Reader, Read only Capability, Reads HID Formats in sector and/or CSN, Wiegand or C&D output (RoHS Compliant) HID FlexSmart MIFARE Reader, Read Only Capability, Custom Configurable, Wiegand or C&D output (Old Part # MX200) (RoHS Compliant) HID FlexSmart DESFire Reader, Read Only Capability, DESFire Custom Configurable, Wiegand or C&D output (Old Part # DX200) (RoHS Compliant) HID FlexSmart MIFARE Keypad Reader, Read only Capability, Reads HID Formats in sector and/or CSN, Wiegand or C&D (RoHS Compliant) HID FlexSmart MIFARE Keypad Reader, Read Only Capability, Custom Configurable, Wiegand or C&D output (RoHS Compliant) HID FlexSmart DESFire Keypad Reader, Read Only Capability, DESFire Custom Configurable, Wiegand or C&D output (RoHS Compliant) HID MIFARE Reader, Read/Write Capability, HID Formats and/or CSN, Wiegand & RS232 Output Base Part No. Current Rev. No.* 6075 B 6076 A 6077 A Color Options K = Black Arch Slim Z = No Bezel K = Black Arch Slim Z = No Bezel K = Black Arch Slim Z = No Bezel Hardware Options N = Pigtail 8 (0.5 meter) N = Pigtail 8 (0.5 meter) N = Pigtail 8 (0.5 meter) 607 A K = Black N = Pigtail 8 (0.5 meter) 6072 A K = Black N = Pigtail 8 (0.5 meter) 6073 A K = Black N = Pigtail 8 (0.5 meter) 6055 B G = Gray B = Beige W = White K = Black L = Long Pigtail (9 feet/3 meters) Configuration Setting Options Card Read Mode CSN Wiegand Output Mode Custom Key 5 Keypad 6 Custom 7 0 N/A XXXX Y N/A XXXX Y N/A XXXX Y N/A 0 9 XXXX Y 0 9 XXXX Y N/A N/A XXXX Y *Revision numbers and availability are subject to change without notice. Consult factory for availability. All trademarks and registered trademarks are the properties of their respective companies. Please refer to the 3.56 MHz Accessories page in this guide for additional bezel options , and 6077 Model Configuration Setting Options are as follows (factory programmed): 00 = Beep on, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 0 = Beep off, LED normally red, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green 02 = Beep on, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green 03 = Beep off, LED normally off, reader flashes green on tag read 07 = Beep off, LED normally off, host must flash red and/or green 3 Card Read Modes are as follows (factory programmed): Refer to the "HID FlexSmart Reader Wiegand Output Configuration" Guide for more details. 0 = HID Data only (Sector, MIFARE Application Directory or Sector Location, only applies if CSN Wiegand output Mode = 0) = Card Serial Number (CSN) Only 2 = HID MIFARE Data or CSN 3 = DESFire Custom 4 = MIFARE Custom 4 Card Serial Number (CSN) Wiegand Output Modes are as follows (factory programmed). Refer to the "HID MIFARE Reader Wiegand Output Configuration" Guide for more details. 0 = 32 bit = 32 bit reverse (as in 6055A) 2 = 26 bit 3 = 34 bit 4 = 40 bit Card Serial Number (CSN) Wiegand Output Modes options, 2, 3, and 4 cannot be used if Card Read Mode = 0 5 Custom Key: 0 = Standard keys, = Custom keys 6 Keypad: 0 = Buffer one key, no parity, 4 bit message 9 = Buffer one key, add compliment, 8 bit message (Dorado) 7 Consult Factory. September 9, HID Global Corporation. All rights reserved Page 59 of 7

60 3.56 MHz How to Order Guide, D00529, B.8 MIFARE Reader Wiegand Output Configuration Base Model Number: 6055B only Desired Wiegand Data Output format Comments Model Number Any HID/OEM format. As encoded into Mifare card by HID factory or field programmer. 6055BXX bit, Mifare Card Serial Number. Random number burned into card chip. 6055BXX bit, Mifare Card Serial Number, reverse output. Reverse output matches HID Mifare Reader base model number: 6055A. 6055BXX00 26-bit, derived from Mifare Card Serial number. ID = 6 lower bits of CSN. Reader generates fixed FC - defaults to 00, but can be custom configured. 6055BXX bit, Mifare Card Serial number plus beginning/ending parity. 6055BXX bit, Mifare Card Serial Number plus 8-bit checksum. Checksum per Philips standard. 6055BXX004 HID/OEM format or 32-bit (Mifare Card Serial Number). Reader searches for HID/OEM data in sector, then MAD; if no HID data found, then send CSN as configured. 6055BXX0020 HID/OEM format or (32-bit Mifare Card Serial Number in reverse output). Reader searches for HID/OEM data in sector, then MAD; if no HID data found, then send CSN as configured. 6055BXX002 HID/OEM format or 26-bit (derived from Mifare Card Serial Number). Reader searches for HID/OEM data in sector, then MAD; if no HID data found, then send CSN as configured. 6055BXX0022 HID/OEM format or 34-bit (Mifare CSN plus beginning/ending parity). Reader searches for HID/OEM data in sector, then MAD; if no HID data found, then send CSN as configured. 6055BXX0023 HID/OEM format or 40-bit (Mifare Card Serial number plus 8 bit checksum). Reader searches for HID/OEM data in sector, then MAD; if no HID data found, then send CSN as configured. 6055BXX0024 Notes:. MAD = Mifare Application Directory, a table of contents for the Mifare card located in Sector CSN = Card Serial Number, a 32-bit random number burned into the chip by the chip manufacturer (not HID). 3. XX = Indicates color and hardware options. Refer to the "How to Order Guide" for complete ordering instructions. September 9, HID Global Corporation. All rights reserved Page 60 of 7

61 3.56 MHz How to Order Guide D00529, B.8 Custom Format MIFARE or DESFire Reader Ordering Guide Reader Part Numbers: 6076 (MIFARE ) 6077 (DESFire ) 6072 (MIFARE With Keypad) 6073 (DESFire With Keypad) Description: These custom MIFARE or DESFire readers offer a complete selection of keys and formats for adding to existing installations or facilitating companies to manage their own keys and formats. This worksheet will help you to gather information that will be required to process orders for these readers. Please specify the following A - Custom Format Number. B - New Custom MIFARE Format Specify Sector. Block where data is located. Starting bit. Number of bits to output. Custom Keys (Yes/No). C - New Custom DESFire Format Specify APPLICATION to store data. File to store data. Number of bits to output. Custom Keys (Yes/No). All keys should be transferred securely and not placed in this Order Guide. All custom formats require additional time to develop and test, with a customer sign-off before the first order can be fulfilled. Once your key is encrypted using the HID Key Wrapper program, please fill-in the following information: Wrapped Key:. Wrapping password (Pass Phrase):. Using the HID Key Wrapper program will keep your key secure during order processing. September 9, HID Global Corporation. All rights reserved Page 6 of 7

62 3.56 MHz How to Order Guide D00529, B.8 MIFARE Programmer/Developer Kit Ordering Guide Standard Part Number 30AKN00: Programmer for 3.56 MHz MIFARE standard (S50) Transponders/Cards/Tags, with CD-ROM containing Windows 95/98/2000NT compatible software, plug-in power supply, and configuration diskette. 302AKN00: HID MIFARE Developer's Resource Kit (Reader Kit with CD) 302ANS00: HID MIFARE Developer's Resource CD Only To upgrade 4 an existing HID MIFARE Programmer please provide: Serial Number:. Software Name:. (Software name can be found on the Customer Specific Files Diskette) Please specify the following, 2 : A - Format Number #. Facility Code Range, or specific Facility Code. Card Number Range (Start and Stop). B - Format Number # 2 (If required). Facility Code Range, or specific Facility Code. Card Number Range (Start and Stop). Customer must also identify the final user of the HID MIFARE Programmer to HID 3 : Company Name:. Contact Name:. Address:. Phone #:. Fax #:. Address:. Only formats authorized for use by your company can be ordered. For HID Format Numbers, please contact HID Customer Service. Consult factory for a list of programmable RFID Transponders/Cards/Tags that can be programmed with this Programmer. 2 For Corporate 000 Format and Custom Facility Code & Card Number Range Programmers, please contact Customer Service for availability, lead times, and pricing. 3 HID requires that a Software License Agreement, signed by the final user of the HID MIFARE Programmer, be on file at HID prior to shipment. 4 Software License Agreement does not apply to HID MIFARE Programmer upgrades. All trademarks and registered trademarks are the properties of their respective companies.. September 9, HID Global Corporation. All rights reserved Page 62 of 7

63 3.56 MHz How to Order Guide D00529, B.8 Edge Readers Edge Solo Part Numbers and Options Edge Solo Product Description Base Part Rev. No.* Color Hardware Configuration Configuration Option iclass Elite Key EdgePlus Solo ES400 Single door, IP-based stand-alone controller with built in web interface. Allows external connection to any Wiegand output (up to 28 bit ID) or most HID Clock & Data readers. Indoor use only. Stand-alone integrated access control B K = Black E = Externally-mounted reader N/A N/A EdgeReader Solo ESR40 Single door, IP-based stand-alone controller with built in web interface, with Integrated R40 iclass reader. Indoor use only 8320 A K = Black I = Integrated reader 00 = Beep on, LED normally red, reader flashes green on tag read 0 Stand-alone integrated access control EdgeReader Solo ESRP Single door, IP-based stand-alone controller with built in web interface, with Integrated RP40 Multi-Class reader. Indoor use only Stand-alone integrated access control 8325 B K = Black I = Integrated reader 00 = Beep on, LED normally red, Reader flashes green on tag read 0 For Technical Support, please call (Press option 4). For Sales support, please call *Revision numbers and availability are subject to change without notice. 0 = Standard (Reads all iclass cards with unique keys diversified from HID master key) Example Part #: EdgePlus Solo ES400: 83000BKE EdgeReader Solo ESR40: 8320AKI000 EdgeReader Solo ESRP40: 8325BKI000 September 9, HID Global Corporation. All rights reserved Page 63 of 7

64 3.56 MHz How to Order Guide D00529, B.8 Edge Solo Kit Part Numbers and Options Edge Solo Product Description Base Part Rev No.* Color Hardware Configuration Configuration Option Reader / iclass Credential Elite Key Options Kit EdgePlus Solo ES400 with () RP5 and (20) iclass 37bit Cards K83000 B K = Black E = Externally mounted reader N/A N/A PC Kit EdgePlus Solo ES400 with () RP5 and (0) iclass 37bit Keyfobs K83000 B K = Black E = Externally mounted reader N/A N/A PK Kit EdgePlus Solo ES400 with () R5 and (20) iclass 37bit Cards K83000 B K = Black E = Externally mounted reader N/A N/A RC Kit EdgePlus Solo ES400 with () R5 and (0) iclass37bit Keyfobs K83000 B K = Black E = Externally mounted reader N/A N/A RK Kit EdgeReader Solo ESR40 with (20) iclass Cards K8320 A K = Black I = Integrated reader Kit EdgeReader Solo ESR40 with (0) iclass Keyfobs K8320 A K = Black I = Integrated reader 00 = Beep on, LED normally red, reader flashes green on tag read 00 = Beep on, LED normally red, reader flashes green on tag read 0 C 0 K Kit EdgeReader multiclass Solo ESRP40 with (20) iclass Cards K8325 B K = Black I = Integrated reader 00 = Beep on, LED normally red, reader flashes green on tag read 0 C Kit EdgeReader Solo multiclass ESRP40 with (0) iclass Keyfobs K8325 B K = Black I = Integrated reader 00 = Beep on, LED normally red, reader flashes green on tag read 0 K For Technical Support, please call (Press option 4). For Sales support, please call *Revision numbers and availability are subject to change without notice. 0 = Standard (Reads all iclass cards with unique keys diversified from HID master key) September 9, HID Global Corporation. All rights reserved Page 64 of 7

65 3.56 MHz How to Order Guide D00529, B.8 Example Part #: Kit EdgePlus Solo ES400 with R5 and Cards: K83000BKE000-RC Kit EdgeReader Solo ESR40 with Keyfobs: K8320AKI000-K Kit EdgeReader Solo ESRP40 with Cards: K8325BKI000-C Additional Card Packs and Keyfobs Edge Solo Card/Fob Description Base Part Memory Programming Front Packaging Back Packaging Card Numbering Slot Punch Option / Custom Edge Solo Card Pack - (20) EdgeSolo logo iclass 37bit Cards P C G M V EDGE Edge Solo Key Pack (0) iclass Keyfobs 37bit P K N M N Example Part #: Edge Solo Card Pack : 2000-PCGMV-EDGE Edge Solo Key Pack : 2050-PKNMN September 9, HID Global Corporation. All rights reserved Page 65 of 7