TECHNICAL SPECIFICATION

Transcription

1 Front View Back View Part Number: Page Number: 1 of 6

2 Introduction The is a multi-format switcher with 2 - HDMI, 1 - VGA, and 1 - Display Port inputs, and a single HDMI output. It supports multiple switching modes, and has a built-in audio de-embedder. The is able to be remotely controlled through RS232 commands and/or contact closure to provide for remote control needs. The unit also supports Talley feedback for remote mounting and integration into control panels. Package Contents 1 1 5V 2A DC power adapter 2 Wall/table mounting bracket Features Multi-format inputs for VGA/DP/HDMI(x2) Support for DP 1.2 with 4K@30Hz Supports resolutions up to 4K@30Hz or 4K@60Hz 4:2:0 HDCP compliant Internal or live EDID modes for each input port De-embedded analog audio at the output Support for RS232/button/contact closure with Talley Manual, hybrid, auto and priority switching modes Status LED for all connections on front Part Number: Page Number: 2 of 6

3 Video HDMI Compliance HDMI1.4a DP Compliance DP 1.2 VGA Compliance VESA HDCP Compliant Yes Max Resolution 30Hz Connectors Connectors (2) HDMI Input, (1) VGA Input, (1) DP Input, (1) RS232 TB, (1) 3.5mm TRS Audio Input, (1) HDMI Output, (1) 3.5mm Audio TRS Output Mechanical Dimensions 7.5 x 4.1 x 1.2 in. (L/W/H) [190 x103 x29 mm (L/W/H)] Net Weight 0.728lbs[330g] Package Size 9.5 x 7.1 x 2.8 in. (L/W/H) [240 x 180 x 70 mm (L/W/H)] Gross Weight 1.257lbs [570g] Power Power Supply 5V 2A DC Environmental Operation 32~131 F [0~55 C] Temperature Storage -4~185 F [-20~85 C] Temperature Relative Humidity 5~95% RH [no condensation] Part Number: Page Number: 3 of 6

4 Resolution H active x V active Refresh Rates Pixel Clock H (khz) V (Hz) (MHz) 480p 720 x p 720 x p 1280 x p 1280 x p 1280 x i 1920 x i 1920 x i 1920 x p 1920 x p 1920 x p 1920 x p 1920 x p 1920 x p 1920 x VGA 640 x VGA 640 x VGA 640 x SVGA 800 x SVGA 800 x SVGA 800 x SVGA 800 x SVGA 800 x XGA 1024 x XGA 1024 x XGA 1024 x XGA 1024 x WXGA 1280 x SXGA 1280 x SXGA 1280 x SXGA 1280 x UXGA 1600 x XGA x WXGA x WXGA x WUXGA x Supported VGA Resolutions Note: The VGA input on the SH4M- 110 does not have a built in scaler, it is a converter only. This means whatever resolution you insert will be sent to the monitor. Please check that your target resolution is supported by both the switch and your desired display. Part Number: Page Number: 4 of 6

5 Connection and Installation The factory default for the input ports are: VGA and Display Port inputs are set to internal EDID, and the HDMI input is set with external EDID. See User Manual for more information. Part Number: Page Number: 5 of 6

6 Panel Description Front Panel 1. HD-O: LED is solid when output is connected and there is a signal to display. LED will flash when the display is connected but there is no signal. LED will be off when there is no display connected. 2. HDMI-A, HDMI-B, VGA, DP: LED will be solid when it is the active input, flashing when a signal is present but not the active input, or off when there is no input signal detected. 3. PWR: Solid red when power is on. 4. SELECT: Button for switching input signal. Rear Panel Power: DC Power Input with locking thread 2. VGA: VGA Input 3. AUD: VGA Audio Input 3.5mm TRS (Line level, Stereo) 4. DP: Display Port Input 5. HDMI-A/B: HDMI Inputs 6. HDMI: HDMI Output 7. AUD: Analog Audio Output 3.5mm TRS (Line level, Stereo) 8. Terminal Block: RS232 and Contact Closure with Tally Part Number: Page Number: 6 of 6