norsap.com Page 1 of 7

Transcription

1 Page 1 of 7

2 First choice, the base... Before you can use NorSap Modular Arm Rest Solution, you need to choose a base model. Underneath the short story: NorSap 2 A chair base with three way electrically adjustable seating. Electrically rise and lower of the column. Electrically turn of seating. Pneumatic rise and lower of the back rest. Manual seat tilt adjustment. Manual foot rest adjustment. Optional Electrically deck rail for forward, aft or traverse travel. Electrically adjustable foot rest. Heated seating Lumbar support Integrated communication Logo and pattern combination. NorSap 3 A chair base with eight way electrically adjustable seating. Electrically rise and lower of the column. Electrically rise and lower of the back rest. Electrically turn of seating. Electrically rise and lower of the whole seat. Electrically tilt adjustment in front of seat. Electrically tilt adjustment in back of seat. Electrically horizontal adjustment of the seat. Electrically back rest angle adjustment. Manual foot rest adjustment. Optional Electrically deck rail for forward, aft or traverse travel. Electrically adjustable foot rest. Heated seating Lumbar support Integrated communication Logo and pattern combination. Article number: NorSap 2 Base Seating height 6-87mm Article number: NorSap 3 Base Seating height 67-94mm The undercarriage of the seat allows mm extra height adjustment Page 2 of 7

3 3 Right Backpart: DEL-3677H and frontpart: DEL-376H Left Backpart: DEL-1276 and frontpart: DEL-376V The backpart and frontpart sold seperatly. Right Backpart: DEL-3677H and frontpart: DEL376H + Monitorholder: DEL-3844Left Backpart: DEL-1276 and frontpart: DEL-376V + Monitorholder: DEL XXL+ 2 2 Right Backpart: DEL-3677H and frontpart: DEL-3826 Left Backpart: DEL-3677V and frontpart: DEL XXL Right Backpart: DEL-3677H and frontpart: DEL-3678H Left Backpart: DEL-3677V and frontpart: DEL-3678V XL Right Backpart: DEL-3677H and frontpart: DEL-377H - / Left Backpart: DEL-3677V and frontpart: DEL-377V Has a practical handle in front - to ensure easy chair declining - and as a handrail in rough sea - and protection of the controllers LARGE The top covers, made in 3MM aluminum plates, are adapted to fit your equipment. Lacquered in black as standard. Mounted with 4 bolts, which ensures easy and fast access for eventually replacement configurations and maintenance. If you have chosen the NorSap 3 option, please leave space for the controlling panel in the cut out. 1xmm (horizontal or vertically.) 32 STANDARD+ Top covers 31 As shown on the illustrations beneath, you can get the modular armrests in various sizes. The size mentioned by the different models are the cut-out size available for placement of equipment placement. You have a play of approximately 2MM on each side of the cut-out until you hit the walls of the compartment. Other solutions are described on the next page. 2 Modular armrests Page 3 of 7

4 Functions NorSap can provide you with pre-designed modular arm rests in different shapes and sizes. Based on your needs of controlling equipment and other equipment, you can easily find a solution that fits your place of work. Each front and back part of the modular based arm rest system. The back part on the left side has the control panels for the adjustment of the chair itself as a standard. The right back part has a practical not pad holder combined with a cup holder. The modular solutions can be fitted on either our Nor- Sap 2 base chair or the NorSap 3 base chair. On your right you see a finished solution before insertion of the actual equipment. The equipment are to be assembled by the ships or bridge builders. This solution is based on the modular armrests, but the customer has chosen to use designed parts in anodized aluminum covers in stead of the standard black lacquered top cover with cut outs. The possibilities are endless, you may choose to go for the standard solutions or you may add your own touch. Any changes added to the standard products will create an additional cost. Adjustable angle on the equipment module. Specialized flush implementation with easy changeable cutouts. Note pad table integrated in the back of the right arm rest module. Optionally a cut-out for a cup holder. Page 4 of 7

5 Screen solutions By adding monitor holders mounted on the chairs seat base that turns with the operator or integrated in the arm rest. The 6664 / 666 A height, angle and distance adjustable monitor holder. The 6664 has a 2MM distance adjustment while the 666 has 2MM. All cabeling goes thru the tube and arm. The 6668 A height, angle and distance adjustable monitor holder with VESA mounting. Suits most computer monitors. All cabels go thru the tube and arm. Fits the NorSap 3 chair. Communication In addition to controller equipped armrests, we can add loudspeaker and microphone in the top of the chairs back rest. The gooseneck microphone is a stylish high quality unidirectional dynamic microphone, mainly intended for public address applications. Combined with an integrated loudspeaker, this ensures easy and seamless integration of necessary communication for the operator. The back rest can be prepared for your own custom microphone ready for cable pulling. The cables will be concealed within the chairs back rest. Your UHF radio, or other means of communication, can be integrated in the chairs armrest for easy access Microphone 6486 Loudspeaker 8 Ω 6489 Microphone mounting bracket Please state preferred mounting side when ordering, standard is right side. Intercom solutions The chairs back rest can be fitted with a microphone and loudspeaker for UHF or other means of communication. The radio can be centralized elsewhere or integrated in the armrests for easy access. Page of 7

6 Foot rest options Foot switches can also be equipped to ensure that you gain full control over all your in and out puts. Further questions... Make contact with NorSap for further solutions or if you have details that needs to be clarified further. Alternatively you can fit your chair with an glass infused foot rest, if your working position requires good sight straight downwards. NorSap AS Mjåvannsveien 4/ Kristiansand NORWAY web mail tel fax Page 6 of 7

7 Checkbox selection Logo on backrest Order number / ref 3 pillows PUTE-8 PUTE-86 2 pillows PUTE-1 PUTE-2 Adjustable seatframe DEL-137 Standard seatframe DEL-132 Modular armrests: Left side Backpart DEL-3677V Backpart DEL-1276 Frontpart Standard+ DEL-377V Frontpart Large DEL-3678V Frontpart XL DEL-3827 Frontpart XXL DEL-376V Frontpart XXL+ DEL-376V+DEL-3844 Frame with channels for the modular armrests DEL-13 Frame without channels for custom armrests DEL-1299 Electrical turn DEL-1297 Manual turn DEL-1296 Electrical footrest DEL-1322 Manual footrest DEL-1318 MX top with footrest DEL-129 MX top without footrest DEL-1289 MX base height adjustable column DEL-1287 MX complete fixed height with footrest DEL-1333 MX complete fixed height with footrest low edition DEL-133 MX complete fixed height without footrest DEL-1332 Right side Backpart DEL-3677H Frontpart Standard+ DEL-377H Frontpart Large DEL-3678H Frontpart XL DEL-3826 Frontpart XXL DEL-376H Frontpart XXL+ DEL-376H+DEL-3844 Standard treadplate DEL-136 Wooden treadplate SAP-129 Art.no.: 6467 Art.no.: 6468/6469 As standard the text/logo is centered on the backside from a sat position from the top. Desired text Height in cm: (propotional adjustment might be needed in some cases) Color of thread not apliccable when logo supplied. White Silver Red Green Yellow Blue Custom Custom color can be provided, or supplied Typeface not apliccable when logo supplied. Helvetica Front or backside Front Back Times Article numbers: simple text, vessel, company or user name complete full colored logo on backrest advanced logo, several colors and patterns Page 7 of 7