SEL-2411 Programmable Automation Controller
|
|
|
- Coleen Pearson
- 5 years ago
- Views:
Transcription
1 SEL-2411 Programmable Automation Controller - Chassis - Processor and Communications Board - Front Panel - EIA-232 Port - LCD Display - IRIG-B Time Code - Operator Control Interface - Power Supply with 2 DI, 3 DO - EIA-232 Port - Optional I/O Cards Part Number: Chassis Horizontal Panel Mount (Small LCD, 4 Programmable Push Buttons with 4 LEDs, 6 Programmable LEDs) Horizontal Surface Mount (Small LCD, 4 Programmable Push Buttons with 4 LEDs, 6 Programmable LEDs)* Vertical Panel Mount (Large LCD, 4 Programmable Push Buttons with 8 LEDs, 7 Programmable LEDs)* Vertical Surface Mount (Large LCD, 4 Programmable Push Buttons with 8 LEDs, 7 Programmable LEDs)* Slot A Power Supply 125/250 Vdc/Vac Power Supply 24/48 Vdc 24 Vdc/Vac Digital 48 Vdc/Vac Digital 110 Vdc/Vac Digital 125 Vdc/Vac Digital 220 Vdc/Vac Digital 250 Vdc/Vac Digital 24 Vdc/Vac Digital 48 Vdc/Vac Digital 110 Vdc/Vac Digital 125 Vdc/Vac Digital 220 Vdc/Vac Digital 250 Vdc/Vac Digital 1 B 1 C 1 D 1 A 1 G 1 H 2 D 2 G 2 H Slot C No Card Empty 0 X EIA-232/EIA-485 Serial Communication Card* A 0 1 of 9 WI-5038
2 4 DI and 4 EM DO 4 Digital / 4 Digital Output (1) 24 Vdc/Vac DI* 1 B 4 Digital and 3 Digital Output (2 Form C and 1 Form B) 8 Digital Output 48 Vdc/Vac DI* 1 C 110 Vdc/Vac DI* 1 D 125 Vdc/Vac DI* 1 A 220 Vdc/Vac DI* 1 G 250 Vdc/Vac DI* 1 H 4 DI and 4 Fast HC Interrupting DO 24 Vdc/Vac DI* B B 48 Vdc/Vac DI* B C 110 Vdc/Vac DI* B D 125 Vdc/Vac DI* B A 220 Vdc/Vac DI* B G 250 Vdc/Vac DI* B H 24 Vdc/Vac DI* C B 48 Vdc/Vac DI* C C 110 Vdc/Vac DI* C D 125 Vdc/Vac DI* C A 220 Vdc/Vac DI* C G 250 Vdc/Vac DI* C H 8 Form A 8 Form B 6 Form A and 2 Form B 6 Form B and 2 Form A 2 X 8 Digital 24 Vdc/Vac* 3 B 8 Analog 4 Analog / 4 Analog Output (2) 48 Vdc/Vac* 3 C 110 Vdc/Vac* 3 D 125 Vdc/Vac* 3 A 220 Vdc/Vac* 3 G 250 Vdc/Vac* 3 H 8 s: ±20 ma or * 4 s: ±20 ma or 4 s: ±300 V Only* 4 s: ±20 ma or 4 Outputs* 5 X X 2 of 9 WI-5038
3 Slot D No Card Empty 0 X 10 RTD RTD Analog * 9 X 10 RTD/TC inputs RTD and Thermocouple Analog s(only available in the vertical chassis)* DI and 4 EM DO 4 Digital / 4 Digital Output (1) 24 Vdc/Vac DI* 1 B 4 Digital and 3 Digital Output (2 Form C and 1 Form B) 8 Digital Output 48 Vdc/Vac DI* 1 C 110 Vdc/Vac DI* 1 D 125 Vdc/Vac DI* 1 A 220 Vdc/Vac DI* 1 G 250 Vdc/Vac DI* 1 H 4 DI and 4 Fast HC Interrupting DO 24 Vdc/Vac DI* B B 48 Vdc/Vac DI* B C 110 Vdc/Vac DI* B D 125 Vdc/Vac DI* B A 220 Vdc/Vac DI* B G 250 Vdc/Vac DI* B H 24 Vdc/Vac DI* C B 48 Vdc/Vac DI* C C 110 Vdc/Vac DI* C D 125 Vdc/Vac DI* C A 220 Vdc/Vac DI* C G 250 Vdc/Vac DI* C H 8 Form A 8 Form B 6 Form A and 2 Form B 6 Form B and 2 Form A 2 X 8 Digital 24 Vdc/Vac* 3 B 8 Analog 48 Vdc/Vac* 3 C 110 Vdc/Vac* 3 D 125 Vdc/Vac* 3 A 220 Vdc/Vac* 3 G 250 Vdc/Vac* 3 H 8 s: ±20 ma or * 5 X 3 of 9 WI-5038
4 4 Analog / 4 Analog Output (2) 4 s: ±20 ma or 4 s: ±300 V Only* 4 s: ±20 ma or 4 Outputs* X Slot E No Card Empty 0 X 3 AC Voltage 300 Vac Maximum* AC Current / 3 AC 8 Vac Maximum, 5A Voltage Phase* Vac Maximum, 5A Phase* DI and 4 EM DO 4 Digital / 4 Digital Output (1) 24 Vdc/Vac DI* 1 B 4 Digital and 3 Digital Output (2 Form C and 1 Form B) 8 Digital Output 48 Vdc/Vac DI* 1 C 110 Vdc/Vac DI* 1 D 125 Vdc/Vac DI* 1 A 220 Vdc/Vac DI* 1 G 250 Vdc/Vac DI* 1 H 4 DI and 4 Fast HC Interrupting DO 24 Vdc/Vac DI* B B 48 Vdc/Vac DI* B C 110 Vdc/Vac DI* B D 125 Vdc/Vac DI* B A 220 Vdc/Vac DI* B G 250 Vdc/Vac DI* B H 24 Vdc/Vac DI* C B 48 Vdc/Vac DI* C C 110 Vdc/Vac DI* C D 125 Vdc/Vac DI* C A 220 Vdc/Vac DI* C G 250 Vdc/Vac DI* C H 8 Form A 8 Form B 6 Form A and 2 Form B 6 Form B and 2 Form A 2 X 4 of 9 WI-5038
5 8 Digital 24 Vdc/Vac* 3 B 8 Analog 4 Analog / 4 Analog Output (2) Slot Z 48 Vdc/Vac* 3 C 110 Vdc/Vac* 3 D 125 Vdc/Vac* 3 A 220 Vdc/Vac* 3 G 250 Vdc/Vac* 3 H 8 s: ±20 ma or * 4 s: ±20 ma or 4 s: ±300 V Only* 4 s: ±20 ma or 4 Outputs* 5 X X No Card Empty 0 X 4 AC Current 1 Amp Phase, 1 Amp Neutral* Amp Phase, 5 Amp Neutral* Amp Phase, 5 Amp Neutral* Amp Phase, 1 Amp Neutral* DI and 4 EM DO 4 Digital / 4 Digital Output (1) 24 Vdc/Vac DI* 1 B 4 Digital and 3 Digital Output (2 Form C and 1 Form B) 48 Vdc/Vac DI* 1 C 110 Vdc/Vac DI* 1 D 125 Vdc/Vac DI* 1 A 220 Vdc/Vac DI* 1 G 250 Vdc/Vac DI* 1 H 4 DI and 4 Fast HC Interrupting DO 24 Vdc/Vac DI* B B 48 Vdc/Vac DI* B C 110 Vdc/Vac DI* B D 125 Vdc/Vac DI* B A 220 Vdc/Vac DI* B G 250 Vdc/Vac DI* B H 24 Vdc/Vac DI* C B 48 Vdc/Vac DI* C C 110 Vdc/Vac DI* C D 125 Vdc/Vac DI* C A 220 Vdc/Vac DI* C G 5 of 9 WI-5038
6 8 Digital Output 250 Vdc/Vac DI* C H 8 Form A 8 Form B 6 Form A and 2 Form B 6 Form B and 2 Form A 2 X 8 Digital 24 Vdc/Vac* 3 B 8 Analog 4 Analog / 4 Analog Output (2) 48 Vdc/Vac* 3 C 110 Vdc/Vac* 3 D 125 Vdc/Vac* 3 A 220 Vdc/Vac* 3 G 250 Vdc/Vac* 3 H 8 s: ±20 ma or * 4 s: ±20 ma or 4 s: ±300 V Only* 4 s: ±20 ma or 4 Outputs* 5 X X Slot B Standard EIA-232 Front/Rear, IRIG Connector: SEL Protocols, Modbus EIA-232 Front/Rear, IRIG Connector: SEL Fiber-Optic Serial Serial ST: SEL Protocols, Modbus* Serial ST: SEL Ethernet EIA-232 Front/Rear, IRIG Connector - Single 10/100 Base-T Ethernet: SEL Protocols, Modbus* EIA-232 Front/Rear, IRIG Connector - Single 10/100 Base-T Ethernet: SEL EIA-232 Front/Rear, IRIG Connector - Single 10/100 Base-T Ethernet: SEL Protocols, Modbus - DNP3 - IEC-61850* Dual 10/100 Base-T Ethernet: SEL Protocols, Modbus* Dual 10/100 Base-T Ethernet: SEL of 9 WI-5038
7 Dual 10/100 Base-T Ethernet: SEL Protocols, Modbus - DNP3 - IEC-61850* Single 100 Base-FX Ethernet LC: SEL Protocols, Modbus* Single 100 Base-FX Ethernet LC: SEL Single 100 Base-FX Ethernet LC: SEL Protocols, Modbus - DNP3 - IEC-61850* Dual 100 Base-FX Ethernet LC: SEL Protocols, Modbus* Dual 100 Base-FX Ethernet LC: SEL Dual 100 Base-FX Ethernet LC: SEL Protocols, Modbus - DNP3 - IEC-61850* Serial ST - Single 10/100 Base-T Ethernet: SEL Protocols, Modbus* Serial ST - Single 10/100 Base-T Ethernet: SEL Serial ST - Single 10/100 Base-T Ethernet: SEL Protocols, Modbus - DNP3 - IEC * Fiber Serial ST - Dual 10/100 Base-T Ethernet: SEL Protocols, Modbus* Fiber Serial ST - Dual 10/100 Base-T Ethernet: SEL Fiber Serial ST - Dual 10/100 Base-T Ethernet: SEL Protocols, Modbus - DNP3 - IEC-61850* Fiber Serial ST - Single 100 Base-FX Ethernet LC: SEL Protocols, Modbus* Fiber Serial ST - Single 100 Base-FX Ethernet LC: SEL Protocols, Modbus - DNP3* Fiber Serial ST - Single 100 Base-FX Ethernet LC: SEL Protocols, Modbus - DNP3 - IEC-61850* Fiber Serial ST - Dual 100 Base-FX Ethernet LC: SEL Protocols, Modbus* Fiber Serial ST - Dual 100 Base-FX Ethernet LC: SEL Fiber Serial ST - Dual 100 Base-FX Ethernet LC: SEL Protocols, Modbus - DNP3 - IEC * Fiber-Optic Serial and Ethernet of 9 WI-5038
8 Conformal Coat None 0 Conformal Coated Circuit Boards* 1 Accessories Horizontal Configurable Label Kit (5 label sheets) Vertical Configurable Label Kit (2 label sheets) SEL-241X Wetting Voltage Jumper Kit, Eight 4 Prong Jumpers* Wetting Voltage Jumpers Bulk, 100 pack 4- Prong Jumpers* X / 7XX Blanker Plate* Degree Connector Kit* NEMA4 Outdoor Enclosure + FT-1 Cutout, Horizontal* NEMA4 Outdoor Enclosure, No FT-1 Cutout, Horizontal* NEMA4 Outdoor Enclosure + FT-1 Cutout, Vertical* NEMA4 Outdoor Enclosure, No FT-1 Cutout, Vertical* Dust-Protection Assembly* Single Horizontal 7xx/24xx Bracket* Two Horizontal 7xx/24xx Bracket* Horizontal 7xx/24xx + FT-1 Test Switch Bracket* Horizontal 7xx/24xx + Two FT-1 Test Switch Bracket* Single Vertical 7xx/24xx Bracket* Two Vertical 7xx/24xx Bracket* Vertical 7xx/24xx + FT-1 Test Switch Bracket* Fixed Wall-Mount Bracket* Hinged Wall-Mount Bracket, Horizontal* Hinged Wall-Mount Bracket, Vertical* Indoor Enclosure + FT-1 Test Switch, Horizontal* Indoor Enclosure, No FT-1 Test Switch, Horizontal* Indoor Enclosure + FT-1 Test Switch, Vertical* Indoor Enclosure, No FT-1 Test Switch, Vertical* Literature Printed Instruction Manual (4) P M Mounting Gasket* * Additional Cost (1) Unless otherwise specified, all digital outputs are Form A. (2) Only one (1) 4 AI / 4 AO card per chassis. (3) One complimentary printed instruction manual is available upon request with each product purchased. Additional Accessories: 1. ACSELERATOR QuickSet SEL-5030 software ( or on CD upon request. 2. The SEL-2411 comes standard with a CD instruction manual. 8 of 9 WI-5038
9 3. External AC powered RTD module SEL-2600A. 4. External DC powered RTD module SEL-2600D. 5. Option cards are orderable separately for field installation, contact your SEL representative and reference the SELECT I/O Card guide on the web (WI-5932). 6. Replacement rear panel cover plate options, contact your SEL representative NE Hopkins Court - Pullman, WA USA Phone: Fax: of 9 WI-5038
SEL-2414 Transformer Monitor
SEL-2414 Transformer Monitor SEL-2414 Base Unit Vertical Chassis Front Panel Large LCD Display 4 Programmable Pushbuttons w/leds 7 Programmable LEDs Operator Control Interface EIA-232 Port Processor and
Power Quality and Recording Field Upgrade Available SEL-734, Standard Power Quality, 32 MB Memory SEL-734P, Advanced Power Quality, 128 MB Memory*
SEL-734 Advanced Metering System with ANSI and IEC Class 0.2 Accuracy Standard with: ANSI Type 2 Optical Port, 2 Rear EIA-232 Ports, ACSELERATOR QuickSet SEL-5030 Software, Modbus RTU Communications Protocol,
Serial Communication Card (SELECT EIA-232/485) Part Number Serial Communication 9787LA0_ (1) Note: Slot C option only.
pbib`qfll`~êçë m~êíkìãäéêëñçêíüépbijtutjp~åçpbijtutjq lêçéêáåöfåñçêã~íáçå OPRMkbeçéâáåë`çìêí mìääã~åit^vvnspjrsmprp^ müçåéwhnkrmvkppoknuvm c~ñwhnkrmvkppoktvvm fåíéêåéíwïïïkëéäáååkåçã bjã~áäwáåñç]ëéäáååkåçã
SELect I/O Cards Part Numbers for the SEL 710 5
SELect I/O Cards s for the SEL 710 5 Ordering Information OPRMkbeçéâáåë`çìêí mìääã~åit^vvnspjrsmprp^ müçåéwhnkrmvkppoknuvm c~ñwhnkrmvkppoktvvm fåíéêåéíwïïïkëéäáååkåçã bjã~áäwáåñç]ëéäáååkåçã Serial Communication
USB Interface. Power Supply. Manual Raise/Lower Operators. Communications Port (Port 1) Communications Port (Port 2)
SEL-2431 Single-Phase Voltage Regulator Control, Two 120 Vac Voltage Inputs, Eight Contact Inputs (Two 120 Vac Programmable, Four 12 Vdc Self-Whetted Programmable, and Two Dedicated), Seven Contact Outputs
Firmware. Control Cable Interface
SEL-651R-2 Recloser Control with Automatic Network Reconfiguration, Harmonic Analysis, Single-Phase Trip Capability, 6 Voltage Inputs, Power Quality Monitoring, 8 Settings Groups, Template Storage, SEL
SEL-710 Motor Protection Relay
SEL-710 Motor Protection Relay SEL-710 ase Unit Vertical hassis Front Panel Large L isplay 4 Programmable Pushbuttons w/8 LEs 8 Target LEs (6 Programmable) Operator ontrol Interface EI-232 Port Processor
SEL-700G Generator and Intertie Protection Relays
SEL-700 enerator and Intertie Protection Relays SEL-700 ase Unit Vertical hassis Front Panel Large L isplay 4 Programmable Pushbuttons w/8 LEs 8 Target LEs (6 Programmable) Operator ontrol Interface EI-232
Maximize process uptime with the SEL-patented motor thermal model.
SEL-710 Motor Protection Relay Maximize process uptime with the SEL-patented motor thermal model. Optimize motor performance with separate thermal models for the stator and rotor. Monitor stator and ambient
2 ms arc-flash protection and feeder relay in one platform
Feeder Protection Relay 2 ms arc-flash protection and feeder relay in one platform Combine light sensor inputs with high-speed overcurrent protection to achieve secure arc-flash protection in as fast as
NTX Series Product Comparison
NTX Function Primary design application Pole-top/pad-mount switch automation; small substation installations Small substation installations with medium serial and Ethernet port requirements Some legacy
Submittal Data Sheet WAGO Node for itm
The WAGO Node integrates ancillary equipment into the Intelligent Touch Manager (itm) DCM601A71 with the use of DI, DO, AI and AO signals. It provides monitoring and control of non-daikin equipment via
Real-Time Automation Controller (RTAC) Powerful, reliable, and secure multifunction controller
SEL-3530 Real-Time Automation Controller (RTAC) Powerful, reliable, and secure multifunction controller Versatile RTAC operates as a supervisory control and data acquisition (SCADA) remote terminal unit
SEL-487B. A Powerful Solution for Busbar Differential Protection. Bus Differential and Breaker Failure Relay
Bus Differential and Breaker Failure Relay A Powerful Solution for Busbar Differential Protection Features and Benefits Select the for the differential protection of busbar systems with up to 18 terminals.
Getting Started With SEL-3555 RTAC
Getting Started With SEL-3555 RTAC What You Will Need Required Items: SEL-3555 RTAC Microsoft Windows PC a ACSELERATOR RTAC SEL-5033 Software CD Power cable(s) Ethernet cable 1/8-in slotted screwdriver
TABLE I RANGE, POWER, OUTPUT (CONDUCTIVITY MEASUREMENTS)
Issue 11 Page 1 of 5 Model Selection Guide Instructions Consult Steps to Selecting Appropriate Conductivity Instrumentation and Cells before making selections below. Select the desired key number. The
Protect induction and synchronous motors with one relay.
SEL-710-5 Motor Protection Relay Protect induction and synchronous motors with one relay. Patented, accurate thermal protection improves motor availability for production. Synchronous motor protection
2 ms arc-flash protection and feeder relay in one platform
Feeder Protection Relay 2 ms arc-flash protection and feeder relay in one platform Directly monitor and control your system using the 5-inch, 800 480 color touchscreen display. Prevent insulation damage
A low-cost, economical solution for distribution feeder protection
SEL-351A Protection System A low-cost, economical solution for distribution feeder protection Achieve sensitive and secure fault detection using comprehensive protection functions. Track breaker status
S800 I/O ABB Automation
S800 I/O 3BCNIIT F HW02-S800-V0102 Rev. 02/01 Page 1 S800 I/O S800 I/O 3 : Fieldbus Communication Interface (FCI) I/O Module Module Termination Unit (MTU), Compact or Extended version 3BCNIIT F HW02-S800-V0102
MICRO SERIES PROCESS DISPLAYS LARGE DIGIT MODELS
The MICRO SERIES PROCESS DISPLAYS LARGE DIGIT MODELS Mighty-5 DPM MODELS Micro-P & Mighty-1 Mighty-1 Micro-P ELECTRO-NUMERICS, INC. Introduction The Electro-Numerics family of Digital Panel Meters and
RTAC. SEL Real-Time Automation Controller. Integrate station control, a web-based HMI, and logging through one reliable system.
SEL-3530-4 Real-Time Automation Controller Integrate station control, a web-based HMI, and logging through one reliable system. Features and Benefits Integrated Security As with its bigger brother, the
MINER-S Station Controller
MINER-S Station Controller Substation Automation MINER-S Station Controller The MINER-S Station Controller is a SCADA enabled fixed point remote terminal unit (RTU) with a data concentrator, event reporter,
High Voltage DC Meter
High Voltage DC Meter Javelin D PD644 0-300 VDC input NEMA 4X, IP65 front Scale in engineering units Sunlight readable LED display 4-20 ma analog output Two form C 3 A relays option RS-485 serial communications
AC5160 SiPass integrated controller kit
AC5160 SiPass integrated controller kit SiPass integrated Wall housing with pre-assembled basic SiPass integrated components Equipped with one ACC (AC5100), two dual reader interfaces (ADD5100) and one
53MC5 53IT5 53ML5 53SL5
Main Processor Boards 686B608U01* 53MC5000A single loop, standard functionality OBSOLETE - order 614C189U01 686B608U02 53MC5000A two loop, standard functionality OBSOLETE - order 614C189U02 686B608U03
SEL-2440 Discrete Programmable Automation Controller
Discrete Programmable Automation Controller Complete System for Control and Monitoring Rack Panel Surface DIN Rail 32 Inputs 16 Outputs 4 Ports (Standard) Major Features and Benefits Fast and Powerful
Getting Started With the SEL-3505/SEL
Getting Started With the SEL-3505/SEL-3505-3 What You Will Need Microsoft Windows PC* ACSELERATOR RTAC Installation CD Type B USB Cable * Computer running one of the following operating systems: Windows
Redundant System Redundant System P9-1-1
.. P-- Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P-- idcs-8830/idcs-8830r - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Active UTP Transceiver Hub with Integral Isolated Camera Power
Active UTP Transceiver Hub with Integral Isolated Installation Guide HubWayEX16SP - UL Listed sixteen (16) Channel Active UTP Transceiver Hub with Integral Isolated Rev. 011810 More than just power. TM
HIGH-VOLTAGE DC METER
HIGH-VOLTAGE DC METER Javelin D PD644 0-300 VDC input NEMA 4X, IP65 front Scale in engineering units Sunlight readable LED display 4-20 ma analog output Two form C 3 A relays option RS-485 serial communications
Transceiver Hub with Integral Camera Power
Passive UTP Transceiver Hub with Integral Installation Guide Models Include: HubWay8CD HubWay16CD - UL Listed eight (8) Channel Passive UTP - UL Listed sixteen (16) Channel Passive UTP Transceiver Hub
Power-Over-Ethernet (PoE) Weatherproof 14 x12 x7 Enclosure with Mounting Plate and Cooling Fan. Model: NB F. Applications and Features
Power-Over-Ethernet (PoE) Weatherproof 14 x12 x7 Mounting Plate and Cooling Fan Model: NB141207-40F Applications and Features Applications: Remote Wireless LAN WiFi equipment installations using Power-Over-
One relay for safety and process continuity
Motor Management Relay One relay for safety and process continuity Improve safety at each motor control center (MCC) with secure, fast arc-flash detection. Use the enhanced thermal model for more precise
NovaTech Orion I/O Overview
NovaTech Orion I/O 2 NOVATECH ORION I/O 3 NovaTech Orion I/O Overview NovaTech Orion I/O is an extension of the family of OrionLX Automation Platforms for substation automation and incorporates the same
PT-7728/7828 Quick Installation Guide
PT-7728/7828 Quick Installation Guide Moxa PowerTrans Switch Edition 9.0, April 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777
2 NOVATECH. This page is intentionally left blank.
NovaTech Orion I/O 2 NOVATECH This page is intentionally left blank. ORION I/O 3 NovaTech Orion I/O Overview NovaTech Orion I/O is an extension of the family of OrionLX Automation Platforms for substation
INTRINSICALLY SAFE INSTRUMENTATION FOR HAZARDOUS AREAS
INTRINSICALLY SAFE INSTRUMENTATION FOR HAZARDOUS AREAS SHORT FORM 2002 SERIES D1000 Intrinsically Safe Galvanic Isolators SERIES D1000, for DIN Rail Mounting, provide the most simple and cost effective
Protection, Automation, and Control System. Combine subcycle line protection with complete substation bay control
Protection, Automation, and Control System Combine subcycle line protection with complete substation bay control Subcycle distance protection minimizes damage and expensive repairs on transmission lines.
PS-4100 POWER SUPPLY MANUAL
PS-4100 POWER SUPPLY MANUAL Manual Part Number 180-0573 December 7, 2006 TABLE OF CONTENTS TITLE PAGE Table of Contents... 2 List Of Figures... 3 1. Introduction... 4 1.0. General... 4 1.1. Features...
APS SCALE SERIES DIMENSIONS
APS SCALE SERIES DIMENSIONS 4300 Section page 4 Model APS4300 Recommended Column/Base Combinations 14 Atlas Column 20 Atlas Column 30 Atlas Column Atlas Scale Series Dimensions: 4300 OPTIONS 4300 Section
Click Desktop Kit. Click Desktop Kit
Click Desktop Kit Click Desktop Kit The Click Desktop Kit is a desktop-mounted set that gives you the building blocks necessary to work with your Click modules at your computer, whether you re testing
Passive UTP Transceiver Hub with Integral Camera Power Installation Guide
Passive UTP Transceiver Hub with Integral Installation Guide Models Include: HubWay8D HubWay16D - Eight (8) Channels - Sixteen (16) Channels HubWay82D HubWay162D - HubWay8 w/eight (8) HubWayAv - HubWay16
Advanced distribution feeder solution with integrated protection, monitoring, and control
Protection System Advanced distribution feeder solution with integrated protection, monitoring, and control Achieve sensitive and secure fault detection using comprehensive protection functions. Keep track
12-36 VDC/12-24 VAC Power Option 4-Digit Display, 0.56 (14.2 mm) or 1.20 (30.5 mm)
4-20 ma & Relay Output Features 4-20 ma, ± 10 V, TC & RTD Inputs 12-36 VDC/12-24 VAC Power Option 4-Digit Display, 0.56 (14.2 mm) or 1.20 (30.5 mm) 24 VDC @ 200 ma Transmitter Power Supply Options Type
Passive UTP Transceiver Hub with Integral Isolated Camera Power Installation Guide
Passive UTP Transceiver Hub with Integral Isolated Installation Guide Models Include: HubWay8Di HubWay16Di - UL Listed eight (8) Channel Passive UTP - UL Listed sixteen (16) Channel Passive UTP Transceiver
Power-Over-Ethernet (PoE) Weatherproof 14 x12 x7 Enclosure with Mounting Plate. Model: NB Applications and Features
Power-Over-Ethernet (PoE) Weatherproof 14 x12 x7 Mounting Plate Model: NB141207-400 Applications and Features Applications: Remote Wireless LAN WiFi equipment installations using Power- Over-Ethernet Indoor
BITRONICS 878 DIOD Product Description BITRONICS 878 DIOD DISTRIBUTED INPUT/OUTPUT DEVICE
BITRONICS 878 DIOD Product Description BITRONICS 878 DIOD DISTRIBUTED INPUT/OUTPUT DEVICE This page intentionally left blank 2 l BITRONICS 878 DIOD APPLICATION NOTE 878 Distributed Input/Output Device
Active UTP Transceiver Hub with Integral Camera Power Installation Guide
Active UTP Transceiver Hub with Integral Installation Guide Models Include: HubWayLD8D HubWayLD16D - Eight (8) Channels - Sixteen (16) Channels HubWayLD82D HubWayLD162D - HubWayLD8D w/eight (8) HubWayAv
DVBS November 13, (12)
DVBS November 13, 2009 1(12) LUMINATO CHASSIS Luminato web-site: www.telesteluminato.com DVBS November 13, 2009 2(12) Luminato Chassis The Teleste Luminato chassis is a base for an IPTV modular platform
AcquiSuite Ally 48 Advanced Branch Circuit Monitor
AcquiSuite Ally 48 Advanced Branch Circuit Monitor AMC48-MD AMC48-ED Split Core CT Split Core CT Ally Rogowski Rope CT DESCRIPTION The AcquiSuite Ally 48 is the perfect companion to the data acquisition
Simplified information where and how you want it.
ConsolIdator 4 & 8 Multi-channel controllers Simplified information where and how you want it. ConsoliDator 4 Model PD940 ConsoliDator ConsoliDator 4 Features Four 4-20 Inputs Four 4-20 Outputs ConsoliDator
Active UTP Transceiver Hub with Integral Camera Power Installation Guide
Active UTP Transceiver Hub with Integral Installation Guide Models Include: HubWayLD8CDS - UL Listed eight (8) Channel Active UTP Transceiver Hub with Integral HubWayLD82CDS - UL Listed eight (8) Channel
Trident and Trident X2 Digital Process and Temperature Panel Meter
Sign In New User ISO 9001:2008 Certified Quality System Home Products Online Tools Videos Downloads About Us Store Contact Policies Trident and Trident X2 Digital Process and Temperature Panel Meter Products
Bus Differential and Breaker Failure Relay. Advanced bus protection with built-in breaker failure detection
SEL-487B Bus Differential and Breaker Failure Relay Advanced bus protection with built-in breaker failure detection Protect busbars with up to 21 terminals using high-speed, low-impedance bus differential
L200 LINE/SUM/MIKE AMPLIFIER OPERATING AND MAINTENANCE MANUAL
L200 LINE/SUM/MIKE AMPLIFIER OPERATING AND MAINTENANCE MANUAL Copyright 1997-2005, Audio Technologies Incorporated - Printed in USA DESCRIPTION Your L200 Dual Line/Buffer Amplifier is an inexpensive, high
Pre-Installation Information--S8700 IP Connect
Pre-Installation Information--S8700 IP Connect Avaya S8700 Media Server for IP Connect Configuration This job aid provides information, hardware, and tools required for installing an Avaya S8700 Media
Protect induction and synchronous motors with one relay
SEL-710-5 Motor Protection Relay Protect induction and synchronous motors with one relay Patented, accurate thermal protection improves motor availability for production. The 5-inch, 800 480 color touchscreen
General Specifications
General Specifications Yokogawa Y-Flow Remote Terminal Unit (YRTU) Overview Yokogawa s low power YRTU offers flexible I/O points and superior data collection with a wide range of connectivity options.
Power-Over-Ethernet Weatherproof 18" x 16" x 8" Enclosure with Equipment Mounting Plate and Cooling Fans
Power-Over-Ethernet Weatherproof 18" x 16" x 8" Equipment Mounting Plate and Cooling Fans Applications and Features Applications: Remote Wireless LAN WiFi equipment installations using Power- Over-Ethernet
Active UTP Transceiver Hub with Integral Isolated Camera Power Installation Guide
Active UTP Transceiver Hub with Integral Isolated Installation Guide Models Include: HubWayLD8Di HubWayLD16Di - UL Listed eight (8) Channel Active UTP - UL Listed sixteen (16) Channel Active UTP Transceiver
Surge Protection for Surveillance Systems
Surge Protection for Surveillance Systems 1-in-1 Protection for Network Cameras 2-in-1 Protection for Power and Audio/Video Signals 3-in-1 Protection for Power, Audio/Video and PTZ Control Signals Application:
ASTAT XB/XBm Remote Operator
ASTAT XB/XBm Remote Operator User Manual 1 Introduction 1.1 Important User Information Observe all necessary safety precautions when controlling the soft starter remotely. Alert personnel that machinery
Specifications SmartACU2000B-D-PLC SmartACU2000B-D-2PLC SmartACU2000B-D-PID/PLC SmartACU2000B-D-2PID/2PLC Configuration
ACU2000B ACU2000B ( Array Controller) is a powerful integration of PV array communication and other smart functions. What s more, it supports 1000V/1100V/1500V DC system perfectly. built-in PID2000 module
User s Guide. Includes Mounting, Installation, and Product Registration nd Avenue NE Arlington, WA USA (+1)
User s Guide Includes Mounting, Installation, and Product Registration 500 19009 62nd Avenue NE Arlington, WA USA (+1) 360-435-6030 European Sales Office Barcelona, España (+34) 600-843-845 www.outbackpower.com
Keysight Technologies 6550A Series Single-Output, 500 W DC Power Supplies
Keysight Technologies 6550A Series Single-Output, 500 W DC Power Supplies Speed and accuracy for test optimization Data Sheet Introduction This reliable series of 500 W DC power supplies can be controlled
INTERSAFE Data Interface Ports are mounted on an enclosure to allow programming access to devices inside without opening the enclosure door.
Spec-00131 INTERSAFE Data Interface Ports, Type 4/4X/12 INDUSTRY STANDARDS Mild Steel Painted Ports UL 508A Component Recognized; Type 4, 12; File No. E61997 cul Component Recognized per CSA C22.2 No 94;
Bus Differential and Breaker Failure Relay. Advanced bus protection with built-in breaker failure detection
SEL-487B Bus Differential and Breaker Failure Relay Advanced bus protection with built-in breaker failure detection Protect busbars with up to 21 terminals using high-speed, low-impedance bus differential
MODCELL 2050R Single Loop Controllers
Isolated universal process and remote set-point input Four internal set-points No jumpers required to define instrument parameters Ratio/bias on process and remote set-point Totalizer Ramp/soak profile
Platform. Product Data Sheet PDS A01 January, 2004 NGA 2000
Product Data Sheet PDS 103-610.A01 January, 2004 NGA 2000 Platform Modular design single platform supports multiple analyzer and Input/Output modules Local network with intelligent, bi-directional communication
Accessory Guide Indoor AP Accessories
Indoor AP Accessories INDOOR SKU Compatible Products Description Kit Contents 902-0120-0000 R720 R710 R700* R600* R610* R500* R510* R310 * fits AP, but does not support padlock security Multipurpose mounting
irbx6gf Features Intelligent 6 Port HSR/PRP Ethernet Switch IEC and IEEE 1613 Compliant
irbx6gf www.is5com.com Intelligent 6 Port HSR/PRP Ethernet Switch IEC 61850 and IEEE 1613 Compliant Features Fully compliant with IEC 62439-3 HSR High-availability Seamless Redundancy Supports 4 x 10/100/1000Base-T(X)
DATAWATCH IX MONITOR/RECORDER OVERVIEW FEATURES AND BENEFITS. Datasheet
OVERVIEW The DATAWATCH IX monitor offers an excellent graphical display and recording device for a box of its size. The compact panel mount unit offers four isolated or eight non-isolated high accuracy
SEL-3332 Intelligent Server
Complete Automation System for Data Concentration and IED Integration Solid-state disk activity lights help identify system activity USB ports conveniently located for file transfer access LEDs indicate
ftserver 3300 Service Bulletin
ftserver 3300 Service Bulletin Last Updated 2/12/04 1. Overview The ftserver 3300 is based on the 2.4-GHz or 3.06-GHz Intel IA32 architecture using Intel s Xeon processors and one-way or two-way (one or
Accessory Guide ZoneFlex Indoor AP Accessories
ZoneFlex Indoor AP Accessories INDOOR SKU Compatible Products Description Kit Contents 902-0120-0000 ZoneFlex R720 ZoneFlex R710 ZoneFlex R700* ZoneFlex R600* ZoneFlex R610* ZoneFlex R500* ZoneFlex R510*
HDMI and Ethernet Extender via 2 Multimode Fibers LC Duplex Connector Extends HDMI+ 10/100M Ethernet Link Up To 800 Meters
Description APAC AHE-FD-800-2LC extender enables HDMI and 10/100M Ethernet extension up to 800 meters over duplex multi-mode fibers (OM3). It is definitely applicable for server room PC and client terminal
INTERSAFE DATA INTERFACE PORTS, TYPE 4/4X/12
SPEC-00131 INTERSAFE Data Interface Ports INTERSAFE Data Interface Ports, Type 4/4X/12 INTERSAFE DATA INTERFACE PORTS, TYPE 4/4X/12 INDUSTRY STANDARDS Mild Steel Painted Ports UL 508A Component Recognized;
HC900 Redundant Hybrid Controller Assemblies
Page 1 of 5 HC900 Redundant Hybrid Controller Assemblies Model Selection Guide Power Supplies 120/240VAC, 60W 120/240VAC, 28W Note 5 24Vdc, 60W Redundant Controller Rack Redundant CPU Rack Controller C70R
Installing the DX LCD Display
DX LCD Display User s Guide 3-1 Chapter 3 Installing the DX LCD Display Introduction Use the DX LCD Display as either a portable device, or permanently mount it in a panel or on the wall. For panel and
63 to 125 A. Functions. Conformity standards. General characteristics. Changeover switches SIRCO VM1 changeover switches.
comut_004_a_1_cat Changeover switches switches 63 to 125 A switches are manually operated three or four pole switches. They provide, source inversion or switching under load between two low voltage power
INDUSTRIAL RTU & I/O DEVICES
Sixnet Automation Series INDUSTRIAL RTU & I/O DEVICES www.redlion.net/sixnet Sixnet Automation Series Sixnet rugged RTUs and I/O provide a simple yet powerful means to reliably monitor and control remote
iologik E2200 Series Smart Ethernet remote I/O with Click&GO Logic Introduction Remote I/O PC-Free Alarm and Control Intelligence
iologik E2200 Series Smart Ethernet remote I/O with Click&GO Logic Active communication with patented MX-AOPC UA Server and Active OPC server Smart alarm management with email, SNMP traps, TCP, UDP Save
This Datasheet for the IC697CHS790. Rack, 9 Slots, Rear Mount.
This Datasheet for the IC697CHS790 Rack, 9 Slots, Rear Mount. http://www.cimtecautomation.com/parts/p-14771-ic697chs790.aspx Provides the wiring diagrams and installation guidelines for this GE Series
IT-467-*-BT 22" (1680 x 1050)
IT-467-*-BT 22" (1680 x 1050) The IT-467-*-BT with luminous 22" display is the Panel PC of the future for all widescreen applications in industrial areas. The 1680 x 1050 pixel resolution (WSXGA) is the
DECS-250 Digital Excitation Control System
DECS-250 Digital Excitation Control System Basler Electric's DECS-250 digital excitation control system offers high performance, high flexibility, and extreme reliability for brushless excited AC synchronous
Bus Differential and Breaker Failure Relay. Advanced bus protection with built-in breaker failure detection
SEL-487B Bus Differential and Breaker Failure Relay Advanced bus protection with built-in breaker failure detection Protect busbars with up to 21 terminals using high-speed, low-impedance bus differential
120 VAC 18x16x8 Inch Weatherproof Enclosure with Mounting Plate, Cooling Fans and Solid State Fan Controllers Model: NB FS
120 VAC 18x16x8 Inch Weatherproof Enclosure with Mounting Plate, Cooling Fans and Solid State Fan Controllers Model: NB181608-10FS Applications and Features Features: Molded Fiberglass Reinforced Polyester
MODEL SIB-V245 / V453
WILKERSON INSTRUMENT CO., INC INSTALLATION & OPERATION MANUAL SCADA INTERFACE BOARD MODEL SIB-V245 / V453 FOR MOTOROLA ACE3600 MIXED I/O MODULE RoHS Compliant UL/cUL Recognized Motorola is a registered
tapcon 230 user-friendly, FleXiBle and reliable. transformer control
tapcon 230 user-friendly, FleXiBle and reliable. transformer control Tapcon 230 tapcon 230 the new standard in voltage control. 2 Maschinenfabrik Reinhausen (MR) has been developing and manufacturing voltage
Automation, Ethernet & Wireless Solutions
Sixnet Industrial Series Automation, Ethernet & Wireless Solutions www.redlion.net/sixnet This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 Sixnet Automation Series Sixnet rugged RTUs
TOKISTAR LIGHTING INSTRUCTION MANUAL
TokiLux TM WG Series TOKISTAR LIGHTING INSTRUCTION MANUAL 24 VDC or 24 VAC General Description Tokistar s TokiLux WG Series may be operated at 24 VDC or 24 VAC. Light Bars are installed end-to-end within
SCC Inc. TS Series. Technical Instructions Document No. TS-1050 March 10, TS Serial Communication Kits for use with LMV3, LMV5, and RWF Controls
SCC Inc. TS Serial Communication Kits for use with LMV3, LMV5, and RWF Controls Technical Instructions March 10, 2017 Description A TS series serial communication kit connects a Siemens LMV linkageless
4K8 8-port Ethernet 10/100 Switch, 4K-Series
Magnum 4K Series 4K8 8-port Ethernet 10/100 Switch, 4K-Series Boosting the performance of Ethernet LANs with the flexibility of both twisted-pair and a bonus configurable Magnum Model 4K8 Ethernet 10/100
Simplified information where and how you want it.
ConsolIdator 4 & 8 Multi-channel controllers Simplified information where and how you want it. ConsoliDator 4 Model PD940 ConsoliDator ConsoliDator 4 Features Four 4-20 Inputs Four 4-20 Outputs ConsoliDator
TCP. Control and Protection Terminal Data sheet
TCP Control and Protection Terminal Data sheet DSE_TCP_eng_AP No part of this publication may be reproduced by whatever means without the prior written permission of Ingeteam T&D. One of the main aims
Smart. Simple. Reliable. 600mm 1,100mm 600mm ( ft.) Weight 80 kg (176.4 lb.) [1] Protection Rating Ground-Mounted, Wall-Mounted, Rack-Mounted
![Smart. Simple. Reliable. 600mm 1,100mm 600mm ( ft.) Weight 80 kg (176.4 lb.) [1] Protection Rating Ground-Mounted, Wall-Mounted, Rack-Mounted](/thumbs/93/113353328.jpg "Smart. Simple. Reliable. 600mm 1,100mm 600mm ( ft.) Weight 80 kg (176.4 lb.) [1] Protection Rating Ground-Mounted, Wall-Mounted, Rack-Mounted")
ACU2000 Series ACU2000 ( Array Controller Unit) is a powerful integration of PV array communication and other smart functions. built-in Anti-PID module built-in (optional) Multiple communication interfaces
See instructions to download and install the latest version of LinkBoxMB and the user's manual at
Safety Instructions WARNING Follow carefully this safety and installation instructions. Improper work may lead to serious harmful for your health and also may damage seriously the IntesisBox and/or any
Roughneck V920D Series Camera Domes XX Quick Guide
Quick Guide XX258-20-06 Roughneck V920D Series Camera Domes Vicon Industries Inc. Tel: 631-952-2288 Fax: 631-951-2288 Toll Free: 800-645-9116 24-Hour Technical Support: 800-34-VICON (800-348-4266) UK:
M650 Family Multifunction SCADA Meters
M650 Family Multifunction SCADA Meters M650 / Model Selection Guide: M650 back M650 Family of Multifunction SCADA Meters Model Display Measurements 3-line plus alphanumeric Instantaneous plus demands and