Product End-of-Life Disassembly Instructions

Transcription

1 Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs Marketing Name / Model [List multiple models if applicable.] HP Laptop PC 17 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Quantity of items Item Description Notes included in product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) Batteries Mercury-containing components Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm With a surface greater than 10 sq cm M/B All types including standard alkaline and lithium coin or button style batteries Main battery For example, mercury in lamps, display backlights, scanner lamps, switches, batteries Includes background illuminated displays with gas discharge lamps 17.3'' Cathode Ray Tubes (CRT) 0 Capacitors / condensers (Containing PCB/PCT) 0 Electrolytic Capacitors / Condensers measuring 0 greater than 2.5 cm in diameter or height External electrical cables and cords Power cords 1 Gas Discharge Lamps 0 Plastics containing Brominated Flame Retardants 0 weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above) Components and parts containing toner and ink, Include the cartridges, print heads, tubes, vent 0 including liquids, semi-liquids (gel/paste) and toner chambers, and service stations. Components and waste containing asbestos 0 Components, parts and materials containing 0 EL-MF Page 1 Template Revision B PSG instructions for this template are available at EL-MF

2 refractory ceramic fibers Components, parts and materials containing radioactive substances Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Electric screwdriver (Cross) #1, Cross ODD BRKT support fixture Support fixture 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: 1. Follow steps described in Disassembly instruction (file attached) 2. If parts can be removed without using a tool, remove it first 3. Use correct screwdriver and torque value before unlock the screw Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations). EL-MF Page 2 Template Revision B PSG instructions for this template are available at EL-MF877-01

3 MANUFACTURING PROCESS INSTRUCTIONS MECHANICAL ASSEMBLY MODEL : Harry Potter 17 Auditor:Lee Chung-Sheng Tabulator:Chang Nevil

4 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 1(1/1) Name : Loosen screws 1. Loosen screws M2.5x6 * Electric screwdriver #1 1

5 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 2(1/1) Name : Remove Rubber Rear 1. Remove Rubber Front 下殼腳墊選用配置 DF FF FF+ D cover Front rubber Rear rubber Jet Black 6054B B Snow White 6054B B Smoky Grey 6054B B Sapphire Blue 6054B B Velvet Burgundy 6054B B Serenity Mint 6054B B Natural Silver 6054B B Pale Gold 6054B B Scarlet Red 6054B B

6 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 3(1/1) Name : Loosen screws 1. Loosen screws M2.5x6 * Electric screwdriver #1 1

7 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 4(1/1) Name : Disassemble ODD Ver. : 1.01 Date : 2018/3/ Disassemble ODD() 2. Loosen screws M2x2*2 (Fig.1) 3. Disassemble ODD Bezel 2 Electric screwdriver #1 1

8 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 5(1/1) Name : Disassemble ODD BRKT 螺絲拆解孔鐵件定位孔 1. Put ODD on the support fixture (/) 2. Loosen M2x2.5* 1, and disassemble ODD BRKT (/) Electric screwdriver #1 1 ODD BRKT support fixture 1

9 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 6(1/1) Name : Disassemble D cover 1. Disassemble D cover

10 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 7(1/1) Name : Loosen battery screws 1. Loosen batteryscrews M2x3*4 () Electric screwdriver #1 1

11 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 8(1/1) Name : Disassemble DDR & BATT 1. Disassemble DDR() 2. Disassemble battery() DDR DIMM1

12 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 9(1/1) Name : Disconnect Antenna cable 1. Disconnect WLAN Antenna cable terminal ()

13 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 10(1/1) Name : Remove Antenna cable 1. Remove Antenna Cable ()

14 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 11(1/1) Name : Loosen SSD WLAN Module screws 1. Loosen SSD, WLAN Module screws M2x3 *2( ~3) 2. Disassemble SSD & WLAN Module Fig3 Electric screwdriver #1 1

15 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 12(1/1) Name : Disassemble SSD/B SSD bracket 1. Disconnect SSD/B FFC CNTR from M/B () 2. Loosen screws M2x3*2() 3. Disassemble SSD/B & SSD BRKT 1 2 Electric screwdriver #1 1

16 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 13(1/1) Name : Disassemble HDD HDD 1. Disconnect HDD FFC CNTR from M/B() 2. Disassemble HDD from C Cover, () 3. Disassemble HDD Bumper(6051B ) OK NG NG Fig3

17 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 14(1/1) Name : Disconnect EDP & ODD/B FFC CNTR 1. Disconnect edp Cable CNTR from M/B () 2. Remove edp cable() 3. Disconnect ODD/B FFC CNTR Fig3

18 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 15(1/1) Name : Disassemble Hinge hp 1. Open the machine to 135degrees and place it on the fixture 2. Loosen Hinge screws M2.5x6*4 in the order Fig3 3 4 Fig4 Support fixture 1 Electric screwdriver #1 1

19 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 16(1/1) Name : Disconnect pick button FFC CNTR 1. Disconnect FFC & Pick Button CNTR,()

20 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 17(1/1) Name : Disconnect TP & KB backlight FFC 1. Disconnect TP PCB CNTR,() 2. Disconnect KB BL FPC CNTR only for BL SKU()

21 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 18(1/1) Name : Disconnect USB FFC&KB CNTR 背膠 背膠 1. Disconnect USB FFC CNTR, () 2. Disconnect KB membrane CNTR 上 ()

22 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 19(1/1) Name : Loosen FAN /Hook screws 1 1. Loosen FAN screw M2x3*2() 2. Loosen MB screw M2x3*1() 3. Loosen Hook screw M2x3*1(Fig.3) Fig3 Electric screwdriver #1 1

23 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 20(1/1) Name : Disconnect Speaker & FAN CNTR 1. Disconnect Speaker Cable CNTR() 2. Tear off the tape 3. Disconnect FAN CNTR() 4. Disassemble Fan

24 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 22(1/1) Name : Loosen screws Loosen Thermal Module screws (/2) M2*3(6052A )*4 (UMA) M2*3(6052A )*6 (Discrete) M2*3(6052A )*4 (Fan-less) 2. Disassemble Thermal Module or Fanless BRKT (/) Electric screwdriver #1 1

25 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 23(1/1) Name : Loosen MB screws 1. Loosen M/B screws M2x3*4() Electric screwdriver #1 1

26 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 24(1/1) Name : Disassemble MB 缺口對齊 1. Fan-less SKU Tear off the Mylar(6054B )() 2. Disassemble DC-In Jack and M/B

27 Document No. : Harry Potter 17 (Snape / Dumbledor) FA SOP Station : 25(1/1) Name : Disconnect USB/B FFC & DC-in cable 1. Disconnect USB/B FFC () 6035B Cvilux 6035B 玖東 2. Disconnect DC-in Cable DC-in Cable FOXCONN( 富士康 ) 6017B Singatron( 信音 ) 6017B 實盈 6017B TE( 泰科 ) 6017B