AC/DC power supplies KSENON series KS500, KS400

Transcription

1 BKJU TU Ordering information KS 500 A 230W S 15 S H N D _ 2 years of guarantee Parallel operation Output current up to 60А Input voltage ranges: VAC, VAC; VAC Low profile 35 mm design with blade solder pins, terminal blocks (option) or flexible wires (option) Mounting on DIN-rail (option) Compliant to EN55022, class А Compliant to IEC/EN60950 Power factor correction Operating temperature ranges of cases: -40 С +85 С, -50 С +85 С Models with one or two output channels Galvanically isolated output channels Fan supply output (12 VDC, Imax=200 ma) Short circuit, overvoltage protection and thermal protection Remote on/off Indicator of operation Adjustment of output voltage Feedback from load Typical efficiency: 86% for Uout=24 VDC Parallel or series connection by output Polymer hermetic sealing fill - «Ksenon» series - Max output power, W (maximum power is designated on the case for the given standard size, stipulated with order) - Index of voltage transformation class A AC/DC - Index of nominal input voltage range, VAC 230W 230 VAC ( ) VAC VAC ( ) VAC VAC ( ) VAC - Index of output channels quantity S one D - two - Index of nominal output voltage, VDC (two sign for a channel) - Index of design option S - modification with polymer potting protection Absence of index - modification with potting protection - Index of case design and outputs H - case with a cover and blade solder pins C - case with a cover and terminal blocks* V - metal case with flexible wires* F - metal case with blade solder pins* G - metal case with terminal blocks* - Index of operating temperature range of the case N -40 С +85 С P -50 С +85 С * - Index of mounting on DIN-rail D with clip for mounting on DIN-rail Absence of index without clip - Index of PFC В without PFC Absence of index - with PFC * - customized Advertising sign can be placed on the top surface of the module, which must be removed before installation. Technical parameters contained on this label are the maximal allowable, in case of agreement and confirmation with manufacturer. AC/DC power supplies «Ksenon» KS500 and KS400 series for industrial and special equipment. Though to a compact size (175 х 93 х 35 mm) the maximum output power of new modules can reach up to 600 W. These modules can operate in a wide ranges of temperatures -50 C +85 C. Depending on a version they have one or two galvanically isolated channels, they can be switched on/off by a signal, have a full protection complex against overcurrent, short circuit and overheating, also they can be connected in parallel or in series and compliant to EMC standard EN55022, class A. KS500-xN, KS500-SxN, KS400-xN, KS400-SxN of «Industrial» category are based on element base, which is tested in an expanded temperature range and have a thermal protection chip. Modules are designed to operate in temperature ranges of С. The power supplies are passing special temperature tests and burn-in tests. Modules are filled with special heat conductive compound and can reliably operate in harsh climatic conditions in industrial and special equipment. KS500-SxP, KS400-SxP of «Military» category (customized) are made from custom electronic components and have an expanded operating temperature range of С. They have a thermal protection chip. Modules are passing special temperature test including burn-in tests with extreme on/off modes. Input, output and service pins of a converter are made as a blade solder pins. Connection to them can be done either by using standard female terminals for blade pins, or by soldering. Connection of a module to the equipment with screw terminals allows to organize a possibility of fast installation or changing of module during testings or operation in the equipment, which is not influenced by vibration or aggressive environments. Connection of module to the equipment by soldering to the blade solder pins of flexible wires ensures maximum reliability and minimum voltage drop under effect of adverse mechanical, climatic and chemical factors. Usage of modules with blade solder pins allows to refuse from service of connections - commonly known need for periodic tightening of screw terminals for the whole life time of the modules, which is a significant advantage of these products and provides the convenience of their operation.

2 Standard models with one output Module Input voltage range Output power * Output voltage / nominal output current Max output current on agreement with producer KS500A-230WS12-XXX 12 VDC / 41,6 A 50 А KS500A-230WS15-XXX 15 VDC / 33,3 A 40 А KS500A-230WS24-XXX 500 W 24 VDC / 20,8 A 25 А KS500A-230WS27-XXX 27 VDC / 18,5 A 22,2 А KS500A-230WS48-XXX 48 VDC / 10,4 А 12,5 А KS400A-230WS05-XXX ~ VAC 300 W 5 VDC / 60 A 60 А KS400A-230WS12-XXX 12 VDC / 33,3 A 50 А KS400A-230WS15-XXX 15 VDC / 26,7 A 40 А KS400A-230WS24-XXX 400 W 24 VDC / 16,7 А 25 А KS400A-230WS27-XXX 27 VDC / 14,8 А 22,2 А KS400A-230WS48-XXX 48 VDC / 8,3 А 12,5 А KS500A-230S12-XXX 12 VDC / 41,6 A 50 А KS500A-230S15-XXX 15 VDC / 33,3 A 40 А KS500A-230S24-XXX 500 W 24 VDC / 20,8 A 25 А KS500A-230S27-XXX 27 VDC / 18,5 A 22,2 А KS500A-230S48-XXX 48 VDC / 10,4 А 12,5 А KS400A-230S05-XXX ~ VAC 300 W 5 VDC / 60 A 60 А KS400A-230S12-XXX 12 VDC / 33,3 A 50 А KS400A-230S15-XXX 15 VDC / 26,7 A 40 А KS400A-230S24-XXX 400 W 24 VDC / 16,7 А 25 А KS400A-230S27-XXX 27 VDC / 14,8 А 22,2 А KS400A-230S48-XXX 48 VDC / 8,3 А 12,5 А KS500A-115S12-XXX 12 VDC / 41,6 A 50 А KS500A-115S15-XXX 15 VDC / 33,3 A 40 А KS500A-115S24-XXX 500 W 24 VDC / 20,8 A 25 А KS500A-115S27-XXX 27 VDC / 18,5 A 22,2 А KS500A-115S48-XXX 48 VDC / 10,4 А 12,5 А KS400A-115S05-XXX ~ VAC 300 W 5 VDC / 60 A 60 А KS400A-115S12-XXX 12 VDC / 33,3 A 50 А KS400A-115S15-XXX 15 VDC / 26,7 A 40 А KS400A-115S24-XXX 400 W 24 VDC / 16,7 А 25 А KS400A-115S27-XXX 27 VDC / 14,8 А 22,2 А KS400A-115S48-XXX 48 VDC / 8,3 А 12,5 А Modules with non-standard output voltage from 5 to 60 VDC with maximal output current up to 60 A, could be delivered by request. * For input voltage 230W (wide input) maximal output power decrease at input voltage VAC according to the derating curves.

3 Standard models with two outputs Input voltage Output Module Output voltage / nominal output current range power * KS500A-230WD1212-XXX 12 VDC / 20,8 A ; 12 VDC / 20,8 A KS500A-230WD1515-XXX 15 VDC / 16,6 A ; 15 VDC / 16,6 A 500 W KS500A-230WD2424-XXX 24 VDC / 10,4 A ; 24 VDC / 10,4 A KS500A-230WD2727-XXX 27 VDC / 9,3 A ; 27 VDC / 9,3 A ~ VAC KS400A-230WD0512-XXX 5 VDC / 30 A ; 12 VDC / 12,5 A 300 W KS400A-230WD0515-XXX 5 VDC / 30 A ; 15 VDC / 10 A KS400A-230WD1212-XXX 12 VDC / 16,6 A ; 12 VDC / 16,6 A 400 W KS400A-230WD2424-XXX 24 VDC / 8,3 А ; 24 VDC / 8,3 А KS500A-230D1212-XXX 12 VDC / 20,8 A ; 12 VDC / 20,8 A KS500A-230D1515-XXX 15 VDC / 16,6 A ; 15 VDC / 16,6 A 500 W KS500A-230D2424-XXX 24 VDC / 10,4 A ; 24 VDC / 10,4 A KS500A-230D2727-XXX 27 VDC / 9,3 A ; 27 VDC / 9,3 A ~ VAC KS400A-230D0512-XXX 5 VDC / 30 A ; 12 VDC / 12,5 A 300 W KS400A-230D0515-XXX 5 VDC / 30 A ; 15 VDC / 10 A KS400A-230D1212-XXX 12 VDC / 16,6 A ; 12 VDC / 16,6 A 400 W KS400A-230D2424-XXX 24 VDC / 8,3 А ; 24 VDC / 8,3 А KS500A-115D1212-XXX 12 VDC / 20,8 A ; 12 VDC / 20,8 A KS500A-115D1515-XXX 15 VDC / 16,6 A ; 15 VDC / 16,6 A 500 W KS500A-115D2424-XXX 24 VDC / 10,4 A ; 24 VDC / 10,4 A KS500A-115D2727-XXX 27 VDC / 9,3 A ; 27 VDC / 9,3 A ~ VAC KS400A-115D0512-XXX 5 VDC / 30 A ; 12 VDC / 12,5 A 300 W KS400A-115D0515-XXX 5 VDC / 30 A ; 15 VDC / 10 A KS400A-115D1212-XXX 12 VDC / 16,6 A ; 12 VDC / 16,6 A 400 W KS400A-115D2424-XXX 24 VDC / 8,3 А ; 24 VDC / 8,3 А Modules with non-standard output voltage from 5 to 60 VDC with maximal output current up to 60 A, could be delivered by request. * For input voltage 230W (wide input) maximal output power decrease at input voltage VAC according to the derating curves.

4 Specifications for AC/DC power supplies KS500, KS400 series* Input specifications Input voltage range / Input voltage transient deviation (1 s)** 230W ~ VAC (= VDC)/ ~ VAC (= VDC) ~ VAC (= VDC)/ ~ VAC (= VDC) ~ VAC (= VDC)/ ~ VAC (= VDC) Input frequency Hz Output specifications Output voltage adjustment ±5% Instability of the output voltage: Line regulation ±1% for channel 1 ±3% for channel 2 Load regulation for single-channel models (for % load change) ±2% Load regulation for dual-channel models (for % load change) ±2% for channel 1 ±7% for channel 2 Ripple and noise (peak-to-peak) <2% Uout Short circuit protection*** auto repair Overvoltage protection*** <125% Uout Remote On/Off General specifications Temperature of case - operating N P - storage - power decrease (natural convection) - without power decrease with heatsink Shuts down outputs by applying 3,5 4,5VDC (10 35 mа) on + Remote, - Remote 40 C +85 C 50 C +85 C 50 C +85 C See diagram (dashed, dash-dotted curves) See diagram (solid curve) Humidity С Typical efficiency 80% for Uout=5 VDC 86% for Uout=24 VDC Switching frequency, fixed Withstand voltage input to case input to output output to case, output to output Isolation resistance (input to case, input to output, output to case 500 VDC) EMC standard Safety standard кhz ~2000 VAC ~3000 VAC ~500 VAC 20 МOhm EN55022, class A IEC/EN60950 Thermal resistance case - the environment 1,8 C/W Typical MTBF (Tcase = 50 C; Pout = 0,7 Pout max) hrs Cooling method Free air convection or forced air cooling Weight (max) 1100g Please notice that all information in this reference material is not full. You may find all needed information (additional requirements, manuals and circuit schemes) on our website in Documentation. * All specifications are valid for normal climatic conditions, Uin.nom., Iout.nom., unless otherwise stated. ** For input voltage 230W (wide input) maximal output power decrease at input voltage VAC according to the derating curves. *** Parameters are stated for the information purposes and could not be used at long term work, exciding maximum output current, at work outside of a range of working temperatures, at module s work with the output voltage over a range of adjustment.

5 Output power vs an ambient temperature at input voltage ~ VAC KS500 KS400 Dropping parts of the dashed and dash-dotted curves are in accordance with the maximum temperature of the case (for modules with index «N», «P» equal to +85 ºC). Output power must not exceed the values which are limited by corresponding curve for a given ambient temperature. Modules can be used without a heat sink only when screwing them heat conductive plate with thermal paste and with the length and width not less than case size and thickness of not less than 4 mm. Output power vs input voltage KS500 KS

6 Pin out (models with blade solder pins) pin Single output L N - REM + REM + RS - RS Dual output L N - REM + REM +U FAN - U FAN вывода Single output PARAL NOT USE - U FAN +U FAN +OUT +OUT -OUT -OUT Dual output NOT USE +OUT1 -OUT1 -OUT2 +OUT2 NOT USE NOT USE NOT USE Pin out (models with the terminal blocks) pin X1.1 X1.2 X1.3 X2.1 X2.2 X2.3 X2.4 Single output L N +OUT1 +OUT1 -OUT1 -OUT1 Dual output L N +OUT1 -OUT1 -OUT2 +OUT2 pin X3.1 X3.2 X3.3 X4.1 X4.2 X5.1 X5.2 X5.3 X5.4 Single output NOT USE -U FAN +U FAN -REM +REM +RS -RS PARAL NOT USE Dual output + U FAN -U FAN NOT USE -REM +REM NOT USE NOT USE NOT USE NOT USE

7 Single output model with blade solder pins Single output model with the terminal blocks

8 Dual output model with blade solder pins Dual output model with the terminal blocks

9 Case with a capability of DIN mounting (EN x15/7.5)