PSC-WCM-050-XX Single Channel Wireless Fixture Control Module

Transcription

1 TECHNICAL SPECIFICATIONS PSC-WCM-050-XX Single Channel Wireless Fixture Module Overview 1 Channel of 0-10 Dimming Active Output Active Bluetooth Mesh Enabled In compliance with CE, FCC, IC, AS/NZS and JAPAN for Radio Communication Applications The PacWave Wireless Fixture ler allows for one channel of 0-10 dimming, high relay control, sensor input, and is made to fit into a Bluetooth mesh system. This unit is controlled wirelessly via Bluetooth Mesh module allowing for wireless dimming of LED lighting and seamless integration of Bluetooth Mesh software solutions. The small physical size allows for this unit to be place within the fixture. Wireless Operation End users can program dimming levels and group multiple controls into a Bluetooth Mesh system for simultaneous wireless lighting control. 1 Channel Dimming: allows for one 0-10 dimming channel for driver control. The controller allows for Bluetooth Mesh system pairing with Bluetooth Mesh system providers. Relay : control output can be used to trigger relays or other control circuitry. : 12VDC sensor input for interfacing sensors into Bluetooth Mesh system. Accessories Power Pack: The PSC-WCM-50-EC-XX operates on 12-24VDC input and requires a separate power pack such as the PacWave PSC-AC-PP-200/300/400. This power pack incorporates a high current relay and a high voltage transformer which can accept universal input ( VAC). How to Order Model No. Description Input Voltage Output Input PSC-WCM-50 Wireless Fixture ler Module 12-24VDC 0-10V Dimming PSC-AC-PP-200 Dimming Power Pack for Fixture Mount VAC 12.5VDC PSC-AC-PP-700C Power Pack for Fixture Mount VAC 12.5VDC PSC-AC-PP-400 Power Pack for Fixture Mount no Relay VAC 12.5VDC Add Suffix for options: -BLE -BLE-SR / -BLE-FSR -BLE-CB For PacWave Standalone Bluetooth Enabled Version For Bluetooth Mesh in Silvair Enabled Version / For Bluetooth Mesh in Future-Silvair Enabled Version For Bluetooth Mesh in Casambi Enabled Version e.g. PSC-WCM-50-BLE-SR : with Bluetooth Mesh in Silvair Enabled Version Rev. 2/19/2019

2 Vin GND 0-10(+) 0-10(-) PSC-WCM-050-XX Summary Product Type Input Voltage 0-10V Dimming Wireless BLE Fixture ler VDC 100 ma sink, up to 50 LED source drivers Vin-2.5 V 100 ma source 2-Ø0.15 (2-Ø4mm) Physical Dimensions 0.51 (13mm) 12VDC Input Max Bluetooth Range* 49 ~ 65ft (15 ~ 20m) Operating Temperature -40 C to 85 C Storage Temperature -40 C to 85 C Relative Humidity 90-95% non-condensing at 30 C Mounting Fixture or ceiling mount Color White Warranty 5 years 3.21 (81.50mm) 2.56 (65mm) *Bluetooth Range is highly dependent on the integration of fixtures, surrounding environment and conditions. It is recommended to conduct testing for range accuracy (36.50mm) Drawings are Not to Scale Wireless ler Block Diagram: V mA Source 12-24VDC Power Source 2

3 TECHNICAL SPECIFICATIONS PSC-WCM-100/200 (-EC)(-BLE) Wireless Fixture Module Overview 2 Channels of 0-10 Dimming Active output for Relay drive Ambient Light Internal Temperature Sensing External Temperature Bluetooth add-on enables wireless control with greater customization of dimming levels, and sensor control. 48V Supply selectable E Suffix -BLE-FSR is also in compliance with IC, AS/NZS and JA- PAN for Radio Communication Applications The PacWave Wireless Fixture ler allows for two channels of 0-10 dimming, temperature monitoring, ambient light monitoring, active high relay control, and has a general purpose I/O. This unit is controlled wirelessly via the PacWave Bluetooth Smart module allowing for wireless dimming of LED lighting. The small physical size allows for this unit to be place within the fixture. Alternate input voltages are available for voltages rated 18-48V. Wireless Operation End users can program dimming levels, color temperature(two color white), temperature settings, and external ambient light sensor settings. 2 Channel Dimming: allows for two 0-10 dimming channels for driver control. The controller allows for color temperature mixing of the two color white using PacWave Bluetooth Smart module paired with Android or ios application. Relay : control output can be used to trigger relays or other control circuitry. Temperature Sensor: Allows temperature set point for ambient air temperature for both inside the controller case, or externally connected. Set point can engage 0-10 dimming to decrease temperature over a length of time. Accessories Power Pack: The PSC-WCM-100/200-DC0 operates on 12-24VDC/18-48VDC input and requires a separate power pack such as the PacWave PSC-AC-PP-200/300/400. This power pack incorporates a high current relay and a high voltage transformer which can accept universal input ( VAC). Alternatively, the sensor can also operate with a driver that has an auxiliary output (12V) or high voltage VDC. External Temperature Sensor External Ambient Light Sensor How to Order External Light Sensor: Allows user to set a Lux value point to control dimming of the lighting. Model No. Description Input Voltage Output Input PSC-WCM-200 HV Wireless Fixture ler Module VDC 0-10 VDC x2 PSC-WCM-200-EC HV Wireless Fixture ler Module VDC 0-10 VDC x2 PSC-WCM-100 Wireless Fixture ler Module VDC 0-10 VDC x2 PSC-WCM-100-EC Wireless Fixture ler Module VDC 0-10 VDC x2 PSC-AC-PP-200 Dimming Power Pack for Fixture Mount VAC 12.5VDC PSC-AC-PP-700C Power Pack for Fixture Mount VAC 12.5VDC PSC-AC-PP-400 Power Pack for Fixture Mount no Relay VAC 12.5VDC Add Suffix for options: -BLE -BLE-SR / -BLE-FSR -BLE-CB -BLE-CB-CCT1 -BLE-CB-CCT2 Temp-sensor Light Sensor Temp-sensor Light Sensor For PacWave Standalone Bluetooth Enabled Version For Bluetooth Mesh in Silvair Enabled Version / For Bluetooth Mesh in Future-Silvair Enabled Version For Bluetooth Mesh in Casambi Enabled Version (No Color Tuning) For Bluetooth Mesh in Casambi Enabled Version, Tunable White (Single Driver with Two Channel Output) For Bluetooth Mesh in Casambi Enabled Version, Tunable White (Two Drivers with One Channel Output) Rev. 2/18/2019

4 PSC-WCM-100/200-BLE Summary Product Type Input Voltage for PSC-WCM-100-BLE Input Voltage for PSC-WCM-200-BLE Wireless BLE Fixture ler 12-24VDC VDC Max Bluetooth Range* 49 ~ 65ft (15 ~ 20m) Relay 12 VDC 2-Ø0.15 (2-Ø4mm) Physical Dimensions 0.89 (22.50mm) 0.73 (18.50mm) Operating Temperature -30 C to 70 C Storage Temperature -40 C to 80 C Relative Humidity 90-95% non-condensing at 30 C Mounting Color Warranty Fixture or ceiling mount White 5 Years 3.21 (81.50mm) 2.56 (65mm) *Bluetooth Range is highly dependent on the integration of fixtures, surrounding environment and conditions. It is recommended to conduct testing for range accuracy (36.50mm) Drawings are Not to Scale Wiring Diagram Pin 1: Vin Pin 2: GND Pin 3: CH1 DIM + Pin 4: CH1 DIM - Pin 5: CH2 DIM + Pin 6: CH2 DIM - PSC-WCM-100-BLE / PSC-WCM-200-BLE Pin 7: DIGITAL I/O Pin 8: Relay Pin 9: GND Pin 10: ALS Sensor Pin 11: 3.3 V Supply Pin 12: Temp Sensor Pin 1: Vin Pin 2: GND Pin 3: CH1 DIM + Pin 4: CH1 DIM - Pin 5: CH2 DIM + Pin 6: CH2 DIM - PSC-WCM-100-EC-BLE / PSC-WCM-200-EC-BLE 2

5 Pin7: I/O Pin1: Vin Pin8: Pin2: GND Pin9: GND Pin3: 0-10(+) Pin10: ALS Sensor Pin4: 0-10(-) Pin11: 3.3 V Supply Pin5: 0-10(+) Pin12: TEMP Sensor Pin6: 0-10(-) PSC-WCM-100/200-DC0 Wireless ler Block Diagram: Thermistor ALS Sensor V mA Source 12-18V/18-48V Power Source 3