CMi- box. M-Bus Metering Gateway for Mobile Network GSM/GPRS TCP/IP. CMi-Box

Size: px

Start display at page:

Download "CMi- box. M-Bus Metering Gateway for Mobile Network GSM/GPRS TCP/IP. CMi-Box"

Joan Miller
5 years ago
Views:

CMi Series CMi-Box CMi- box M-Bus Metering Gateway for Mobile Network The CMi-Box is a flexible solution for collection of meter values which can be customized to meet each individual customer s

flexible CMi-Box can be customized to meet a wide range of customer needs. The product communicates with meters by the M-Bus or the wireless M-Bus protocol.

1 CMi Series CMi-Box CMi- box M-Bus Metering Gateway for Mobile Network The CMi-Box is a flexible solution for collection of meter values which can be customized to meet each individual customer s needs. CMi-Box is easy to mount and install and is ready to use with any meter following the M-Bus standard protocol. The enclosure provides good protection and can be sealed for extra safety. flexible CMi-Box can be customized to meet a wide range of customer needs. The product communicates with meters by the M-Bus or the wireless M-Bus protocol. It can be equipped with a CMi2110, an integrated Meter Connecticity Module, to communicate with head-end systems using the mobile network. CMi-Box is available with 24 V or 230 V power supply. Integrated M-Bus master CMi-Box can be equipped with an integrated M-Bus Master, which drives up to 8 wired M-Bus slaves. STANDARD OPEN PROTOCOLS The standard open protocol design allows fast and easy integration into existing billing and reporting systems. Meter value reports can be delivered using FTP, HTTP and . The report feature prevents firewall and IT-structure implementation problems. COST EFFECTIVE The integrated solution reduces the amount of equipment necessary in field, which lowers both installation and initial setup costs. The quality and the number of options available serve to minimize the overall cost of the product over the course of its life-cycle. wireless m-bus CMi-Box can be equipped with a wireless M-Bus Receiver to be able to communicate with meters using the wireless M-Bus protocol. All wireless M-Bus slaves within range can be automatically detected and configured for operation. GSM/GPRS TCP/IP CMi-Box

2 Technical data CMi-Box Product Art. No Max. number of wired meters Int.antenna 24V Int.antenna 230V Ext.antenna 24V Ext.antenna 230V GPRS Int.ant 24V GPRS Int.ant 230V GPRS Ext.ant 24V GPRS Ext.ant 230V GPRS 2 x Int.ant 24V GPRS 2 x Int.ant 230V CMi-Box Wired M-Bus GPRS Ext.ant 24V CMi-Box Wired M-Bus GPRS Ext.ant 230V Max. number of wireless meters GSM/ GPRS Storage of meter values External antenna Power supply N/A No No No VAC or Yes N/A No No No VAC Yes N/A No No Yes VAC or Yes N/A No No Yes VAC Yes Slave port Yes Yes No VAC or No Yes Yes No VAC No Yes Yes Yes VAC or No Yes Yes Yes VAC No Yes Yes No VAC or No Yes Yes No VAC No Yes Yes Yes VAC or No Yes Yes Yes VAC No 1: Please note that CMe3100 currently supports up to 256 slaves (actual number determined by license used) 2: When using the WMBUS GPRS solution, 128 is the recommended maximum number of slaves to use Elvaco AB Kungsbacka, Sweden Phone: Fax: info@elvaco.com Elvaco AB. Subject to changes in technology, design and availability without prior notice. CMi-Box Product Sheet English v3.0

CMi Series CMi5110 CMi 5110 Wireless M-Bus Receiver CMi5110 is a wireless M-Bus Receiver, integrated in a CMi-Box, which can be used by any existing wired M-Bus solution or together with Elvaco CMe

3 CMi Series CMi5110 CMi 5110 Wireless M-Bus Receiver CMi5110 is a wireless M-Bus Receiver, integrated in a CMi-Box, which can be used by any existing wired M-Bus solution or together with Elvaco CMe Series products. CMi5110 communicates with meters via the wireless modes S1, T1 and C1, and is compatible with all widely used wireless M-Bus meters on the market. The product handles up to 800 meters, which can be individually secured by encryption keys. Automatic installation By enabling the CMi5110 Automatic installation mode, all wireless M-Bus meters within range can be automatically detected and configured for operation. Installed wireless M-Bus meters can later be edited and configured to use encryption for secure connections. Simple configuration CMi5110 can easily be configured by sending it standard M-Bus commands. Use in existing M-Bus system All installed wireless M-Bus meters are easily read by sending standard M-Bus commands to the CMi5110 M-Bus slave port. This functionality makes the CMi5110 fully compatible with any existing wired M-Bus solution. Future proof The CMi5110 can be remotely configured using standard M-Bus commands. When new M-Bus wireless modes or M-Bus standard updates are available, the firmware can be remotely updated to meet new market demands. By using CMi5110 configured in OMS mode together with CMe Series products, a fully compliant MUC concept can be achieved. CMi5110

4 Technical data CMi5110 Mechanics Protection class IP20 Dimensions (w x h x d) 84 x 37 x 12 mm (CMi-Box: 141 x 157 x 44 mm) Weight 15 g (CMi Box: 250 g) Mounting In CMi-Box module slot Electrical connections Power supply Board connector 2 mm M-Bus slave port Screw terminal mm² Antenna Built-in, or optionally external via SMA-f Electrical characteristics Nominal voltage Frequency Power consumption Installation category CAT V power supply: VAC, 24 V power supply: VAC or, Internal power supply: 4 VAC 50/60 Hz <0.2 W Environmental specifications Operating temperature -20 to +55 C Operating humidity max 80 % RH at temperatures up to 31 C, decreasing linearly to 50 % RH at 40 C Operating altitude m Pollution degree Degree 2 Usage environment Inside of a CMi-Box Storage temperature -40 to +85 C M-Bus Interfaces Wireless M-Bus Receiver Maximum number of Up to 800 M-Bus devices (software limit) Decryption Yes Wireless M-Bus Receiver M-Bus standard EN Wireless M-Bus modes S1, T1, C1 Maximum number of 800 wireless M-Bus devices Radio frequency band 868 MHz Encryption AES-128 RF sensitivity -105 dbm OMS compliant Yes M-Bus slave interface M-Bus standard EN M-Bus baud rate 300 and 2400 bit/s Nominal voltage VDC Power consumption 1T/1.5 ma M-Bus search modes Primary, secondary, enhanced secondary M-Bus default address 251 Approvals EMC EN , EN Safety EN , CAT 2 Elvaco AB Kungsbacka, Sweden Phone: Fax: info@elvaco.com Elvaco AB. Subject to changes in technology, design and availability without prior notice. CMi5110 Product Sheet English v4.0

CMi Series CMi2110 CMi2110 G3 Integrated MCM for L+G UH50, Gateway for Mobile Network CMi2110 is mounted inside a Landis+Gyr UH50 heat meter to perform meter readouts and deliver meter value reports.

5 CMi Series CMi2110 CMi2110 G3 Integrated MCM for L+G UH50, Gateway for Mobile Network CMi2110 is mounted inside a Landis+Gyr UH50 heat meter to perform meter readouts and deliver meter value reports. The product uses standard open protocol for fast and easy integration with any existing system, is configurable by SMS and can receive software updates over the air. READY TO USE Mounted inside the Landis+Gyr UH50 meter, the CMi2110 can handle up to 8 external connected M-Bus slaves. The CMi2110 requires no configuration in the field, which reduces both installation costs and the risk of handling errors. The CMi2110 unit delivers immediate installation status and starts logging meter data directly after power up. STANDARD OPEN PROTOCOLS The standard open protocol design enables fast integration into existing billing and reporting systems. Transparent M-Bus communication with GSM and TCP works with any software supporting the M-Bus standard. The CMi2110 can send meter values using FTP, HTTP and . The report feature prevents firewall and IT-structure implementation problems. FLEXIBLE The CMi2110 has a flexible design with many integration and communication possibilities, which allows a wide range of customer implementations. Special needs can be met by adding new functionality to an existing installation using the remote update facility. COST EFFECTIVE The CMi2110 provides one of the most cost-effective solutions for district heating on the market. The integrated solution reduces the amount of equipment necessary in the field, which lowers both installation and initial setup costs. The quality and the number of options available serve to minimize the overall cost of the product over the course of its use. FUTURE PROOF The CMi2110 is built on standard SUN Java platform technology, a worldwide standard. Core platform and libraries are designed and tested by leading software companies. Updates and patches can easily be performed remotely, preventing unneccessary service calls or on site visits. sms L+G UH50 http ftp x8 gsm

6 Technical data CMi2110 Mechanics Protection class Dimensions (w x h x d) Weight Mounting Antenna SIM card Electrical connections Supply voltage Connection M-Bus USB slave port Network IP54 85 x 38 x 25 mm 30 g In Landis+Gyr UH50 module slot Built-in, or optionally external via SMA-f Slide, standard size WZU-AC110/ or WZU- ACDC24-50 Push-pull connector, cable area mm² Type micro B Mobile (Radio) Electrical characteristics WZU-AC110/ Nominal voltage VAC (+/- 10%) Frequency 50/60 Hz Power consumption (max) <6 W Power consumption (nom) <1 W Installation category CAT 2 Electrical characteristics WZU-ACDC24-50 Nominal voltage AC VAC Nominal voltage DC Frequency 50/60 Hz (or DC) Power consumption (max) <6 W Power consumption (nom) <1 W Installation category CAT 2 Environmental specifications Operating temperature -20 C to +55 C Operating humidity max 5 % to 90 %, non-condensing Operating altitude m Pollution degree Degree 2 Usage environment Indoors Storage temperature -40 C to +85 C User interface Green LED Red LED Yellow LED Blue LED Push button Configuration Power Error GSM status USB acitve Factory reset SMS, HTTP, GSM CSD, Telnet M-Bus Interfaces Maximum number of M-Bus devices (software limit) Transparent M-Bus Decryption Integrated M-Bus Master M-Bus standard M-Bus baud rate Nominal voltage Maximum unit loads Integrated M-Bus Master 128 GSM and TCP/IP (software limit does not apply to Transparent M-Bus mode) No EN 13757, full M-Bus decoder implemented 2400 and 9600 bit/s 28 VDC 8T/12 ma (in addition to the L+G UH50). Canbe extended with CMeX10-13S Series. Primary, secondary M-Bus search modes Maximum cable length 1000 m (100 nf/km, maximum 90 Ω) General Real time clock backup Real time clock accuracy Script engine Software/firmware update Measurement reports Data storage (examples) Number of meters: 1 Number of meters: 32 Number of meters: 64 Number of meters: h <2 s/day Intelligent script engine for active content generation Using GSM/GPRS/HTTP HTTP, FTP, SMTP ( ), SMS 15 minute values: ~200 days, Hourly values: ~800 days 15 minute values: ~6 days, Hourly values: ~25 days 15 minute values: ~3 days, Hourly values: ~12 days 15 minute values: ~1 day, Hourly values: ~6 days Mobile network GPRS class Up to 12 Band 850/900/1800/1900 MHz Integration Meter implementation Landis+Gyr UH50 Approvals EMC EN , EN Safety EN , CAT 2 Elvaco AB Kungsbacka, Sweden Phone: Fax: info@elvaco.com Elvaco AB. SUN Java, Java are registered trademarks of Sun Microsystems, Inc. UH50 is a registered trademark of Landis+Gyr. Subject to changes in technology, design and availability without prior notice. CMi2110 Product Sheet English v2.0

CMe2100/CMi21xx Operations guide English v 1.0

CMe2100/CMi21xx Operations guide English v 1.0 CMe200/CMi2xx Operations guide English v.0 Contents Document notes... 6. Copyright and trademark... 6.2 Contacts... 6 2 Using this manual... 7 2. Purpose and audience... 7 2.2 Online resources... 7 2.3