Operating Instructions. Sophos Access Points
|
|
- Lawrence Ford
- 6 years ago
- Views:
Transcription
1 Sophos Access Points
2 Foreword We are pleased to welcome you as a new Sophos Access Point customer. These operating instructions will help you install and configure the access point and provide technical specifications of all Sophos access point models. In addition, please also see the following documents that contain useful information on safety, regulatory compliance, and configuration options: Ì Ì Sophos Access Points Safety Instructions and Regulatory Information Ì Ì Sophos UTM Administration Guide: Configuring the UTM hardware and software appliance The instructions must be read carefully prior to using the device and should be kept in a safe place. You may download all user manuals and additional documentation from the Sophos Knowledgebase at knowledgebase.aspx. Introduction UTM Wireless Protection simplifies the operation of secure and reliable wireless networks. It combines affordable and configuration-less access points through a builtin wireless controller in the in Sophos UTM. The wireless controller itself centrally manages all wireless access points; all you need to do is plug in the device anywhere in your network. The access point will find the controller, fetch its configuration and become operable within seconds. In addition, it easily provides wireless guest Internet access during the initial setup, unless you explicitly deny automatic configuration. Installation AP 10/15/30/50/100 Preliminary steps Please update your UTM appliance to the latest version available. Note that you also need a valid UTM Wireless Protection subscription to operate the Sophos Access Points. Connect the access point to the internal network Decide where you would prefer to place the access point, and put the access point in that location. For mounting instructions, see below. Now connect the access point to your internal network by plugging in the network cable to the access point s RJ45 or LAN (PoE) Ethernet interface, respectively. 1
3 Connect the access point to the power supply The AP 30, AP 50, and AP 100 can be powered directly through the Power-over- Ethernet-injector. Note that it is also possible to power them by a PoE-compliant switch. For more information on PoE-injectors, see below. Connect the AP 10 and AP 15 to the power supply. Please use the power supply from the scope of supply. Start the communication between the access point and the UTM appliance When connected to the network, the access point will try to receive an IP address via DHCP. Therefore, you need either the UTM appliance (with a DHCP server enabled and listening on the interface the access point is connected to) or any other DHCP server to provide an IP address for the access point. After successfully receiving an IP address, the access point will communicate with the UTM appliance. For this to happen, the UTM appliance needs to be put in the upstream of the access points, either being the default gateway of the access points (which was provided by the DHCP service) or on the default route (most likely your route to the Internet). Please note that the actual Internet access is not necessary to use UTM Wireless Protection. While waiting for DHCP and searching for the UTM appliance, the access point s power LED will blink slowly. Enable UTM Wireless Protection on the UTM appliance In WebAdmin, navigate to the Wireless Protection menu entry. On the Global Settings tab, click the Enable button. When enabling Wireless Protection for the first time, the Initial Setup frame will appear. It shows the configuration which will be created: A separate Wireless Guest network using WPA2 personal with DHCP for wireless clients, which will be allowed to use DNS on the UTM appliance and the Web Surfing service. The pre-shared key is auto-generated and will only be shown in this section. This configuration is intended as a template, you can edit the settings at any time on the Wireless Protection > Wireless Networks tab. You can also skip the initial setup by ticking the checkbox on the bottom of the section. 2
4 Accepting the access point The UTM appliance will start to communicate with the access point and they will show up as Pending on the Wireless Protection > Access Points tab in WebAdmin. The ID of the Access Points, shown in square brackets, is also printed on the bottom of the device. It can be used to distinguish the access point. By clicking the Accept button, you are given the option to select the channel this access point will transmit on. When leaving the channel setting on Auto, the access point will use the least used channel. We also suggest to give the access point a meaningful location (e.g., Meeting Room ) as this will ease handling multiple access points. After clicking the Save button, the access points will reboot. Upon reconnect, the access point will check if a more recent firmware is available. If so, they will automatically perform a firmware update. During the firmware update, the access point s power LED will blink rapidly. Important note: Do not unplug the power while the firmware is updating. Otherwise the access point will be rendered inoperable and must be returned to the reseller. The access point will then reboot to complete the firmware update. If no new firmware is available, the access point is operational and appears as Active in WebAdmin. 3
5 AP 10 Scope of supply Sophos AP 10 Security Notes Power supply Detachable dipole antenna Ethernet cable Mounting instructions The Sophos AP 10 can be mounted on the wall. Screws are not included in delivery. Only use screws whose dimensions correspond with the mounting holes on the back side. AP 10 Controls Power (LED display) Off Blinking rapidly Blinking slowly Power off Power on Firmware update No connection to the Sophos UTM LAN connection (LED display) Network connection, no activity Blinking Network activity WLAN access (LED display) Power 10/100 Base-TX Reset Network connection, no activity Blinking Network activity Interfaces and buttons DC-IN Power RJ45 10/100 Base-TX interface Reset Currently not supported 4
6 Technical specifications Sophos AP 10 Chassis Plastic housing, white Maximum throughput 150 Mbit/s LAN interfaces 1 x 10/100 Base-TX Supported WLAN standards b/g/n 2.4 GHz Antenna 1 x detachable dipole antenna (2 dbi) Connector type: RP-SMA Frequencies / channels 2.412~2.462 GHz Channels 1-11 Power supply Power consumption Power-over-Ethernet Dimensions W x H x D Weight VAC, 50/60 Hz, max. 0.3 A 8 W (max.) No 124 x 25 x 96 mm 130 g Temperature range Operating: 0 C to 45 C Storage: -20 C to 70 C Humidity (non-condensing) 5% to 95% Mounting Supported security standards Desktop / wall WPA/WPA2, WEP, 802.1X (RADIUS) Number of supported SSIDs 8 Regulatory compliance CE FCC MIC/VCCI (Japan) Radio: EN CFR 47, Part 15 Subpart C EMC: EN , EN CFR 47, Part 15 Subpart B EMF: EN FCC , IEEE C95.1 N/a Safety: EN N/a N/a Certification ID: 201 WW V-3/ V-4/ AP 10 Mounting template Do not shrink to fit when printing 8,85 cm (3,48 in) 2mm 16mm 5mm 5
7 AP 15 Scope of supply Sophos AP 15 Security Notes Power supply 2 Detachable dipole antenna 2 screws and dowels Ethernet cable Important note: Sophos AP15 requires Sophos UTM V to be installed. Mounting instructions The Sophos AP 15 can be mounted on the wall. Screws are included in delivery. Controls LED Green - blinking slowly Green - blinking rapidly Orange - blinking slowly Orange - blinking rapidly AP is booting Network connectivity No connection to the Sophos UTM Firmware update Interfaces and buttons 12V DC-IN LAN (PoE) Power 10/100/1000 Base-TX interface 10/100/1000 Base-TX Power 6
8 Technical specifications Sophos AP 15 Chassis Plastic housing, white Maximum throughput 300 Mbit/s LAN interfaces 1 x 10/100/1000 Base-TX Supported WLAN standards b/g/n 2.4 GHz Antenna 2 x detachable dipole antenna (2 dbi) Connector type: RP-SMA Frequencies / channels ETSI FCC GHz (Channels 1-13) GHz (channels 1-11) Power supply Power consumption Power-over-Ethernet Dimensions W x H x D Weight 12 Vdc / 1 A 2.5 W (max.) 802.3af, 802.3at 194 x 32 x 115 mm 260 g Temperature range Operating: 0 C to 45 C Storage: -20 C to 60 C Humidity (non-condensing) 0% to 90% Mounting Supported security standards Desktop / wall WPA/WPA2, WEP, 802.1X (RADIUS) Number of supported SSIDs 8 Regulatory compliance CE FCC Radio: EN CFR 47, Part 15 Subpart C EMC: EN , EN CFR 47, Part 15 Subpart B EMF: EN FCC , IEEE C95.1 Safety: EN N/a 7
9 AP 15 Mounting template Do not shrink to fit when printing 12 cm (4,72 in) 8
10 AP 30 Scope of supply Sophos AP 30 Security Notes Power-over-Ethernet (PoE) injector + power cord 2 Detachable dipole antenna 2 screws and dowels Ethernet cable Mounting instructions The Sophos AP 30 can be mounted on the ceiling. Screws are included in delivery. Use the screws from the scope of supply or screws whose dimensions correspond with the mounting holes in the bracket. 1. Remove the bracket from the housing Unlock the bracket on the backside by turning it (approx. 5 ) counter-clockwise. Then you can take off the bracket. 2. Mount the bracket on the ceiling Use the screws and anchors from the scope of supply. 3. Place the access point on the bracket Place the housing on the bracket and lock it by turning clockwise until stop. Controls Power (LED display) Off Blinking rapidly Blinking slowly Power off Power on Firmware update No connection to the Sophos UTM Power 10/100 Base-TX LAN connection (LED display) Blinking WLAN access (LED display) Blinking Interfaces and buttons Reset Ethernet Network connection, no activity Network activity Network connection, no activity Network activity Currently not supported 10/100 Base-TX interface 12 V DC IN Power 9
11 Technical specifications Sophos AP 30 Chassis Maximum throughput LAN interfaces Supported WLAN standards Antennas Plastic housing, white (smoke detector design) 300 Mbit/s 1 x 10/100 Base-TX b/g/n 2.4 GHz 2 x directional internal antennas (4 dbi) Frequencies / channels 2.412~2.462 GHz Channels 1-11 Power supply Power consumption Power-over-Ethernet Dimensions Weight VAC, 50/60 Hz, max. 0.5 A 8 W (max.) Yes (IEEE 802.3af) 48 VAC/0.375A ø 120 mm, height 50 mm 230 g Temperature range Operating: 0 C to 45 C Storage: -20 C to 70 C Humidity (non-condensing) 5% to 95% Mounting Supported security standards Desktop / ceiling WPA/WPA2, WEP, 802.1X (RADIUS) Number of supported SSIDs 8 Regulatory compliance CE FCC MIC/VCCI (Japan) Radio: EN CFR 47, Part 15 Subpart C EMC: EN , EN CFR 47, Part 15 Subpart B EMF: EN FCC , IEEE C95.1 N/a Safety: EN N/a N/a Certification ID: 201 WW V-3/ V-4/
12 AP 50 Scope of supply Sophos AP 50 Security Notes Power-over-Ethernet (PoE) injector + power cord 2 Detachable dipole antenna Ethernet cable Mounting instructions The Sophos AP 50 can be mounted on the wall. Screws are not included in delivery. Only use screws whose dimensions correspond with the mounting holes on the back side. AP 50 Controls Power (LED display) Off Blinking rapidly Blinking slowly Power off Power on Firmware update No connection to the Sophos UTM LAN connection (LED display) Blinking Network connection, no activity Network activity Wireless LAN access with 2.4 GHz (LED display) 10/100/1000 Base-TX Reset Power Power on/off switch Network connection, no activity Blinking Network activity Wireless LAN access with 5 GHz (LED display) Network connection, no activity Blinking Network activity Interfaces and buttons WPS button Currently not supported OI DC 12V IN Reset PoE/LAN Power on/off switch Power Currently not supported 10/100/1000 Base-TX interface 11
13 Technical specifications Sophos AP 50 Chassis Maximum theoretical throughput LAN interfaces Supported WLAN standards Antennas Plastic housing, white 300 Mbit/s 1 x 10/100/1000 Base-TX a/b/g/n 2.4 GHz / 5 GHz 2 x 2.4G/5G (3dBi/5dBi) dual-band antenna Frequencies / channels Radio I: 11b/g/n: GHz (ETSI) Channels (FCC) Channels 1-11 (FCC) Radio II: 11a/n: GHz (ETSI / FCC) Channels 36, 40, 44, 48 (ETSI / FCC) GHz (FCC) Channels 149, 153, 157, 161, 165 (FCC) Power supply Power consumption Power-over-Ethernet Dimensions Weight VAC, 50/60 Hz, max. 0.3 A 9,6 W (800 ma/12 V)* Yes (802.3at) 154 x 119 x 30 mm 390 g Temperature range Operating: 0 C to 45 C Storage: -10 C to 70 C Humidity (non-condensing) 15% to 95% Mounting Supported security standards Desktop / wall WPA/WPA2, WEP, 802.1X (RADIUS) Number of supported SSIDs 8 Regulatory compliance CE FCC MIC/VCCI (Japan) Radio: EN , EN EMC: EN , EN EN (medical electrical equipment) CFR 47, Part 15 Subpart C, E CFR 47, Part 15 Subpart B EMF: EN FCC , IEEE C95.1 N/a Safety: EN N/a N/a Certification ID: V-3/ V-4/ * It is recommended to only use PoE+ capable (IEEE 802.3at) equipment to power the Sophos AP
14 AP 50 Mounting template Do not shrink to fit when printing 17,05 cm (6,71 in) 5mm 2mm 16mm 13
15 AP 100 Scope of supply Sophos AP 100 Security Notes Power-over-Ethernet (PoE) injector + power cord 3 Detachable dipole antenna 4 screws, dowels and metal plates Ethernet cable Important note: Sophos AP 100 requires Sophos UTM V to be installed. Mounting instructions The Sophos AP 100 can be mounted on the wall. A mounting kit is included in delivery. Controls LED Green - blinking slowly Green - blinking rapidly Orange - blinking slowly Orange - blinking rapidly AP is booting Network connectivity No connection to the Sophos UTM Firmware update Interfaces and buttons 12V DC-IN LAN (PoE) Console USB Power 10/100/1000 Base-TX interface Console access for debugging purposes Currently not used; reserved for future use Console USB 10/100/1000 Base-TX Power 14
16 Technical specifications Sophos AP 100 Chassis Plastic housing, white Physical security Kensington lock Maximum theoretical throughput 1.3 Gbps (5GHz / ac) Mbps (2.4GHz / n) LAN interfaces 1 x 10/100/1000 Base-TX Supported WLAN standards a/b/g/n/ac Antenna 3 x detachable dipole antenna (2 dbi) Connector type: RP-SMA Frequencies / channels ETSI GHz (Channels 1-13) RLAN sub-band 1: GHz (channels 36-64) FCC RLAN sub-band 2: GHz (channels ) GHz (channels ) Power supply Power consumption Power-over-Ethernet Dimensions W x H x D Weight GHz (channels 1-11) 12 Vdc / 4 A 13 W (max.) 802.3af, 802.3at 183 x 36 x 183 mm 505 g U-NII-1: GHz (channels 36-48) U-NII-2: GHz (channels 52-64) U-NII-2e: GHz (channels ) GHz (channels ) U-NII-3: GHz (channels ) Temperature range Operating: 0 C to 50 C Humidity (non-condensing) 0% to 90% Mounting Supported security standards Number of supported SSIDs Desktop / wall WPA/WPA2, WEP, 802.1X (RADIUS) 8 per radio (16 in total) Regulatory compliance CE FCC Radio: EN , EN CFR 47, Part 15 Subpart C, E EMC: EN , EN CFR 47, Part 15 Subpart B EMF: EN FCC , IEEE C95.1 Safety: EN N/a 15
17 Power-over-Ethernet injector (Optionally included with AP 30,AP 50, and AP 100) The PoE injector converts alternating current (AC) to direct current (DC), which is then provided over the Ethernet cable to power the Sophos Access Points AP 30,AP 50, and AP 100. Installation Warning: Do not use crossover cable between the PoE injector s output port and the access point. Before placing the PoE injector, please pay attention to the following safety instructions: Ì Ì Do not cover the PoE injector or block the airflow to the PoE with any foreign objects. Keep the PoE away from excessive heat and humidity and free from vibration and dust. Ì Ì Ensure that the cable length from Ethernet network source to the access point does not exceed 100 m (330 ft). The PoE is not a repeater and does not amplify the Ethernet data signal. To install the PoE injector, proceed as follows: LED Data & Power Out Data In 1. Connect an Ethernet cable to the Data & Power Out interface. 2. Connect the other end of this Ethernet cable to the Ethernet interface of the access point. 3. Connect an Ethernet cable to the Data In interface. 4. Connect the other end of this Ethernet cable to your network switch. 5. Connect the AC power cord from the scope of supply to the PoE injector. 6. Connect the AC power cable to an AC outlet ( VAC). Controls PoE injector PD-3501/AC (AP 30) PoE injector PD-9001GR/AC (AP 50/AP 100) Power LED display Off Power off Yellow continuously Power on Green continuously A remote terminal is connected A remote terminal is connected Green blinking Overload state or short-circuit Overload state or short-circuit Interfaces Input (Data In) 1 x 10/100 Base-TX 1 x 10/100/1000 Base-TX Output (Data & Power Out) 1 x 10/100 Base-TX, plus 50 VDC 1 x 10/100/1000 Base TX, plus 55 VDC 16
18 Technical specifications PoE injector PD-3501/AC (AP 30) PoE injector PD-9001GR/AC (AP 50/AP 100) Chassis Plastic housing Plastic housing Input power AC input voltage: VAC AC Input Voltage: 100 to 240 VAC AC input current: 0.5 A, VAC AC Input Current: VAC AC frequency: 47/63 Hz AC Frequency: 50 to 60 Hz Power-over-Ethernet output (max.) Output power voltage: 50 VDC Output power voltage: 55 VDC Output power: 15.4 W Output power: 30 W Supported PoE standard 802.3af compliant 802.3at compliant Weight 200 g 200 g Dimensions W x H x D 53 x 33 x 140 mm 1 x 10/100/1000 Base TX, plus 55 VDC Mounting Desktop / wall Desktop / wall Temperature 0 C to 40 C (operating) 0 C to 40 C (operating) -20 C to 70 C (storage) -20 C to 70 C (storage) Humidity (non-condensing) 10% to 90% 10% to 90% Regulatory compliance CE, FCC, VCCI, UL, GS, RoHS, WEEE CE, FCC, VCCI, UL, GS, RoHS, WEEE United Kingdom and Worldwide Sales Tel: +44 (0) sales@sophos.com North American Sales Toll Free: nasales@sophos.com Australia and New Zealand Sales Tel: sales@sophos.com.au Asia Sales Tel: salesasia@sophos.com Oxford, UK Boston, USA Copyright Sophos Ltd. All rights reserved. Registered in England and Wales No , The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, UK Sophos is the registered trademark of Sophos Ltd. All other product and company names mentioned are trademarks or registered trademarks of their respective owners DD.oina.simple
Operating Instructions. Sophos Access Points
Operating Instructions Sophos Access Points Foreword We are pleased to welcome you as a new Sophos Access Point customer. These operating instructions will help you install and configure the access point
More informationOperating Instructions APX 120
Foreword We are pleased to welcome you as a new Sophos APX Series customer. Sophos APX Series access points are high performance wireless products using the latest 82.11ac Wave 2 technology for a best-in-class
More informationOperating Instructions APX 320/530/740
APX 32/53/74 Foreword We are pleased to welcome you as a new Sophos APX Series customer. Sophos APX Series access points are high performance wireless products using the latest 82.11ac Wave 2 technology
More informationOperating Instructions APX 320/530/740
Foreword We are pleased to welcome you as a new Sophos APX Series customer. Sophos APX Series access points are high performance wireless products using the latest 82.11ac Wave 2 technology for a best-in-class
More informationQuick Start Guide. Indoor Stand-Alone Access Point. SunSpot AC1200 and SunSpot N300.
Indoor Stand-Alone Access Point SunSpot AC00 and SunSpot N300 The SunSpot N300 and the SunSpot AC00 are single- and dual-band concurrent access points (AP s) respectively. The units are designed to be
More informationSophos SG Series. The All-New Desktop Appliances. Unleash the full potential of your network
The All-New Desktop Appliances Unleash the full potential of your network The new SG Series Desktop appliances are built to provide optimal flexibility, connectivity and reliability at a best-in-class
More information300Mbps Wireless N Gigabit Ceilling Mount Access Point
Datasheet 300Mbps Wireless N Gigabit Ceilling Mount Access Point Highlights Wireless N speed up to 300Mbps Clustering function greatly simplified business wireless network management, to easy manage up
More informationMid-span 802.3af PoE Injector. Installation Guide KPOE-100
Mid-span 802.3af PoE Injector Installation Guide KPOE-100 Doc. 070521 1 (C) 2005 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used
More informationOperating Instructions. SG 310/330 Rev. 2
Foreword We are pleased to welcome you as a new customer of our Sophos SG appliances. To install and configure the hardware appliance you can use the following documents: Hardware Quick Start Guide: Connection
More informationNetCloud Services for Branch. AP22 Spec Sheet. Cradlepoint. All Rights Reserved cradlepoint.com
NetCloud Services for Branch AP22 Spec Sheet Cradlepoint. All Rights Reserved. +1.855.813.3385 cradlepoint.com Cradlepoint AP22 Access Point is sold as part of an all-inclusive branch networking package.
More informationIndustrial IEEE b/g/n wireless access point with 2x10/100Base-T(X) Features
IAP-420 / IAP-420+ Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X) Features High Speed Air Connectivity: WLAN interface support up to 150 Mbps link speed Highly Security Capability:
More information300Mbps Wireless N Gigabit Ceilling Mount Access Point
Datasheet 300Mbps Wireless N Gigabit Ceilling Mount Access Point 120 Highlights Wireless N speed up to 300Mbps The Controller Software enables administrators to manage hundreds of s easily from any PC
More informationMultiple Solutions in One Device
High-Power Wireless AC600 Dual-Band Outdoor Access Point and Repeater 433 Mbps Wireless AC (5 GHz) + 150 Mbps Wireless N (2.4 GHz), IP65, 28 dbm, Wireless Client Isolation, Passive PoE, Wall- and Pole-mount
More informationIAP-320 series are reliable a/b/g WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for
IAP-320 / IAP-320+ Industrial IEEE 802.11 a/b/g wireless access point with 2x10/100Base-T(X) Features High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed Highly Security Capability:
More informationAP22 Spec Sheet. Cradlepoint. All Rights Reserved cradlepoint.com
AP22 Spec Sheet Cradlepoint. All Rights Reserved. +1.855.813.3385 cradlepoint.com INTRODUCTION WHAT S IN THE BOX Semi-compact wireless access point designed for the commercial distributed branch market
More information300Mbps Wireless N Ceiling Mount Access Point
Datasheet Ceiling Mount Access Point 110 Highlights Wireless N speed up to 300Mbps Controller Software enables administrators to easily manage hundreds of s Supports passive PoE for convenient installation
More information802.3at ac 3x3 Dual Band Ceiling Mount Access Point/WDS. Datasheet. can be used with EAP1750H. Key Features. capable switches or injectors
Datasheet EAP1750H 802.11ac 3x3 Dual Band Ceiling Mount Access Point/WDS The EAP1750H leverages the breakthrough speed and performance of 802.11ac for connecting to laptops and other devices that need
More informationAP22 Spec Sheet. Cradlepoint. All Rights Reserved cradlepoint.com
AP22 Spec Sheet Cradlepoint. All Rights Reserved. +1.855.813.3385 cradlepoint.com Cradlepoint AP22 Access Point is sold as part of an all-inclusive branch networking solution in a NetCloud Solution Package.
More information802.3at ac 3x3 Dual Band Ceiling Mount Access Point/WDS. can be used with EAP1750H. Key Features
EAP1750H can be used with 802.3at capable switches or injectors 802.11ac 3x3 Dual Band Ceiling Mount Access Point/WDS The EAP1750H leverages the breakthrough speed and performance of 802.11ac for connecting
More information300Mbps Wireless Gigabit PoE Access Point
WAP-6150 Version: 1 300Mbps Wireless Gigabit PoE Access Point The tough, high performance WAP-6150 is designed for fast wireless connectivity in enterprise or industrial environments of all dimensions.
More information300Mbps Wireless N Gigabit Ceilling Mount Access Point
Datasheet 300Mbps Wireless N Gigabit Ceilling Mount Access Point 120 Highlights Wireless N speed up to 300Mbps The Controller Software enables administrators to manage hundreds of s easily from any PC
More informationManaged Gigabit Wireless Access Point, 300Mbps n, 802.3af PoE, Detachable Antenna
WAP-6150 Version: 1 Managed Gigabit Wireless Access Point, 300Mbps 802.11n, 802.3af PoE, Detachable Antenna The tough, high performance WAP-6150 is designed for fast wireless connectivity in enterprise
More informationOperating Instructions XG 750
Foreword We are pleased to welcome you as a new customer of our Sophos XG appliances. To install and configure the hardware appliance you can use the following documents: Hardware Quick Start Guide: Connection
More informationARUBA INSTANT IAP-92 and IAP-93 ACCESS POINTS
ARUBA INSTANT IAP- and IAP-93 ACCESS POINTS For low-density Wi-Fi client environments inherits the role of the primary Virtual Controller with no service disruption. The primary Virtual Controller operates
More information150Mbps Wireless Outdoor Passive PoE Access Point
WAB-6121 Version: 1 150Mbps Wireless Outdoor Passive PoE Access Point The LevelOne 150Mbps Outdoor Wireless Access Point WAB-6121 is dedicated to long distance outdoor wireless networks. The device combines
More information2-Port Gigabit PoE Extender
Product Highlights Long Range Power over Ethernet Exceed the physical limit of traditional connections by extending a Ethernet link over a distance of up to 500 meters using multiple units Plug and Play
More informationIndustrial IEEE a/b/g/n wireless access point with 2x10/100/1000Base-T(X) Features
IGAP-620 / IGAP-620+ Industrial IEEE 802.11 a/b/g/n wireless access point with 2x10/100/1000Base-T(X) Features High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed Highly Security
More informationNPort W2150A/W2250A Series Quick Installation Guide
NPort W2150A/W2250A Series Quick Installation Guide Edition 6.1, September 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax:
More informationAP22 Spec Sheet. Cradlepoint. All Rights Reserved cradlepoint.com
AP22 Spec Sheet Cradlepoint. All Rights Reserved. +1.855.813.3385 cradlepoint.com Cradlepoint AP22 Access Point is sold as part of an all-inclusive mobile networking solution in a NetCloud Solution Package.
More informationCisco Aironet 1240G Access Point
. Data Sheet Cisco Aironet 1240G Series Access Point Cisco Aironet 1240G Series Access Points provide single-band 802.11g wireless connectivity for challenging RF environments such as factories, warehouses,
More informationCreates a Feature-Rich, Enterprise-Grade Wireless LAN
aruba INSTANT Creates a Feature-Rich, Enterprise-Grade Wireless LAN Management and Visibility Multiple Aruba Instant networks can be securely and centrally managed by AirWave, allowing Aruba Instant to
More informationEWS310AP New Product Setup for Distribution & Messaging Guide
EWS310AP New Product Setup for Distribution & Messaging Guide Model (SKU): EWS310AP Product Name: Dual-Band Wireless N600 Managed Indoor Access Point UPC number: 6 55216 00711 6 MSRP: $349 Product Short
More information11N Wall Mount Access Point / WDS AP / Universal Repeater. Features. Fully compatible with IEEE b/g/n devices
EAP9550-KZ is a powerful and multi-functioned 11n Indoor Access Point and it can act three modes AP/WDS/Universal Repeater. Smoke detector appearance will minimize visibility. So this model can work properly
More informationAC1200 Dual Band Wireless Controller Kit TEW-821DAP2KAC (v1.0r)
AC1200 Dual Band Wireless Controller Kit TEW-821DAP2KAC (v1.0r) Centralized AP management Includes two dual band wireless AC1200 access points with PoE injectors Wireless controller with five gigabit ports
More informationHardware overview. Package contents V-M200, documentation, three antennas, and power supply.
The HP V-M200 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED 802.11a/b/g and 802.11n product. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. In HP V-M200 802.11n Access Point Quickstart
More informationBridge: The 702-W will operate in Layer 2 without network segmentation. Router: The 702-W offers Layer 3 routing to allow network segmentation.
THE INDUSTRIAL NETWORK COMPANY 700 SERIES Industrial Wireless Radio 702-W The N-TRON 702-W Industrial Wireless Radio provides outstanding performance and extreme reliability under the harshest industrial
More informationEAP600 Dual Band Long Range Ceiling Mount Access Point
Package Contents - 1* EAP600-1*Power Adapter - 1*QIG - 1*CD (User s Manual) - 1*Ethernet Cable - 1*T-Rail Mounting Kit - 1*Ceiling/ Wall Mount screw kit - 1*Mounting Bracket EAP600 is a wireless-11n 600Mbps
More informationEWS320AP New Product Setup for Distribution & Messaging Guide
EWS320AP New Product Setup for Distribution & Messaging Guide Model (SKU): EWS320AP Product Name: Dual-Band Wireless N900 Managed Indoor Access Point UPC number: 6 55216 00712 3 MSRP: $499 Product Short
More informationIAR-320 / IAR-320+ is a reliable IEEE a/b/g WLAN VPN router with 2 ports 10/100Base-T(X) router where ETH1
IAR-320 / IAR-320+ Industrial IEEE 802.11 a/b/g Cellular VPN Router Features High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed Provide HNAT enhance LAN to WAN routing performance
More informationCisco WAP121 Wireless-N Access Point with Single Point Setup
Data Sheet Cisco WAP121 Wireless-N Access Point with Single Point Setup Secure, Easy-to-Deploy, Affordable Wireless-N Connectivity Highlights Provides affordable high-bandwidth 802.11n wireless connectivity
More informationUSER GUIDE. AXIS T8120 Midspan 15 W 1-port ENGLISH
USER GUIDE AXIS T8120 Midspan 15 W 1-port ENGLISH Legal Considerations Video and audio surveillance can be prohibited by laws that vary from country to country. Check the laws in your local region before
More informationAdd performance and security to your business' wireless network with the Intellinet High-Power Wireless AC1750 Dual-Band Gigabit PoE Access Point.
High-Power Wireless AC1750 Dual-Band Gigabit PoE Access Point 450 Mbps Wireless N (2.4 GHz) + 1300 Mbps Wireless AC (5 GHz), WDS, Wireless client isolation, 27.5 dbm, wall-mount Part No.: 525787 Add performance
More informationArm-based wireless-enabled DIN-rail industrial computers with 2 serial ports and 2 LAN ports. Features and Benefits.
UC-8100 Series Arm-based wireless-enabled DIN-rail industrial computers with 2 serial ports and 2 LAN ports Features and Benefits Armv7 Cortex-A8 300/600/1000 processor Dual auto-sensing 10/100 Mbps Ethernet
More informationIndustrial IEEE a/b/g/n Cellular VPN Router
IAR-620 / IAR-620+ Industrial IEEE 802.11 a/b/g/n Cellular VPN Router Features High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed Provide HNAT enhance LAN to WAN routing performance
More informationModular 8-Port Mid-span Power over Ethernet Injector
Modular 8-Port Mid-span Power over Ethernet Injector KPOE-800-1P KPOE-800-2P Installation Guide DOC.090201 1 (C) 2008 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced
More informationClean wireless. High-performance clean wireless solutions
Clean wireless High-performance clean wireless solutions The demands on organizations wireless networks such as increased connection counts, bandwidth consumption, need for seamless roaming and extended
More informationMeraki Z-Series Cloud Managed Teleworker Gateway
Datasheet Z Series Meraki Z-Series Cloud Managed Teleworker Gateway Fast, Reliable Connectivity for the Modern Teleworker The Cisco Meraki Z-Series teleworker gateway is an enterprise class firewall, VPN
More informationPRODUCT OVERVIEW SOFTWARE FEATURES. System Windows Windows7, 98, ME, NT, XP, Mac OS X (10.4) System Status MAC, LAN MAC, Country, Current Time,
Dual Band Long Range Ceiling Mount Access Point 2.4 GHz + 5GHz 300Mbps + 300Mbps 29dBm AP/WDS/Repeater PRODUCT OVERVIEW is a wireless-11n 600Mbps (300Mbps + 300Mbps) High Power Dual Band concurrent ceiling
More informationINJ-24A Series Quick Installation Guide
INJ-24A Series Quick Installation Guide Moxa High-Power PoE+ Injector Edition 4.1, August 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777
More informationJetWave IEEE802.11a Wireless Outdoor AP/Bridge. Installation. Wireless Outdoor AP. RoHS LAN 1 LAN 2 LAN 1 LAN 2
IEEE802.11a /Bridge RoHS IEEE 802.11a 5GHz band with maximum net data rate of 54 Mbit/s High Gain 23dbi Panel Antenna maximizes transmission distance to at least 40KM Rugged IP67 Protection Housing for
More informationOperating Instructions. SG 430/450 Rev. 2
Foreword We are pleased to welcome you as a new customer of our Sophos SG appliances. To install and configure the hardware appliance you can use the following documents: Hardware Quick Start Guide: Connection
More informationIAR-120/120+ is a reliable IEEE b/g WLAN VPN router with 2 ports 10/100Base-T(X) router where ETH1 for LAN
IAR-120 / IAR-120+ Industrial IEEE 802.11 b/g Cellular VPN router Features High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed Provide HNAT enhance LAN to WAN routing performance
More informationMobility Point MP-371
Mobility Point MP-371 DATA SHEET Mobility Point MP-371 Single-radio Indoor Wireless Access Point for 802.11a or 802.11b/g The Mobility Point family provides access point, bridging and wireless mesh services
More informationSophos Pricing and Ordering Made Simple Partner FAQ
Sophos Pricing and Ordering Made Simple Partner FAQ When will the changes take effect? When will the new price list be in effect? Are the prices changing? Or just the way to generate a price? Can I build
More informationOutdoor 150 Mbps 1T1R Wireless-N Access Point - 2.4GHz b/g/n PoE-Powered WiFi AP
Outdoor 150 Mbps 1T1R Wireless-N Access Point - 2.4GHz 802.11b/g/n PoE-Powered WiFi AP Product ID: AP150WN1X1OE The AP150WN1X1OE Outdoor Wireless Access Point lets you create a long-range 150Mbps Wireless-N
More informationIGAR G is a reliable IEEE a/b/g/n WLAN VPN router with 2 ports 10/100/1000Base-T(X) router where
IGAR-1062+-4G Industrial IEEE 802.11 a/b/g/n 4G LTE Cellular Router with 2x10/100/1000Base-T(X) Features High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed Provide 2 port 10/100/1000Base-T(X)
More informationLantech. IPES /100TX with 4 PoE Injectors 24~48VDC Industrial Switch. User Manual
Lantech IPES-0008-4 8 10/100TX with 4 PoE Injectors 24~48VDC Industrial Switch User Manual V1.00 Jun 2010 FCC Warning This Equipment has been tested and found to comply with the limits for a Class-A digital
More information8-Port IP40 IEEE802.3af PoE Unmanaged Industrial Switch User s Manual
8-Port IP40 IEEE802.3af PoE Unmanaged Industrial Switch User s Manual Version 1.1 Content Overview... 1 Introduction... 1 Features... 2 Technical Specifications... 3 Packing List... 5 Safety Precaution...
More informationUnified Office Gateway UMG Quick Installation Guide. Version: 1.0
Unified ice Gateway UMG-2000 Quick Installation Guide Version: 1.0 Table of Contents 1. Package Contents... 3 2. Overview... 4 3. Hardware Installation... 6 3.1 Unpack the UMG-2000... 6 3.2 Choosing a
More informationBusiness Wi-Fi Solution. MODELS: AC500,AC50,CAP1750,CAP300, CAP300-outdoor
Business Wi-Fi Solution MODELS: AC500,AC50,CAP1750,CAP300, CAP300-outdoor Auranet Solution Business Integrated Wi-Fi Solution Experience the very latest in business-class Wi-Fi technology with TP-Link
More informationLightRules Network Infrastructure
System and Hardware Specifications LightRules Network Infrastructure The LightRules network infrastructure enables communication and data transfer between Intelligent Light Engines, the LightRules Appliance,
More informationTable of Contents. 1 Welcome. 2 Install your Access Point-I. 3 Using the Access Point-I
Table of Contents 1 Welcome Introducing the Avaya Wireless LAN 1-1 About the Access Point-I 1-2 Finding Information 1-3 2 Install your Access Point-I Overview 2-1 Verify Kit Contents 2-2 Write Down Product
More informationARC Series Router CBA850
ARC Series Router CBA850 Spec Sheet 2017 Cradlepoint. All Rights Reserved. +1.855.813.3385 cradlepoint.com 1 INTRODUCTION WHAT S IN THE BOX CBA850 with integrated MC400 Multi-Carrier Software-Defined Radio
More informationJetWave IEEE802.11a and b/g Wireless Outdoor AP/Bridge. Installation. Wireless Outdoor AP. RoHS LAN 1 LAN 2
JetWave 2640 IEEE802.11a and 802.11b/g Wireless Outdoor AP/Bridge RoHS Support both IEEE 802.11a and 802.11b/g with maximum net data rate of 54 Mbps High Gain 23dbi Panel Antenna maximizes transmission
More informationEAP300 v2. Long Range Ceiling Mount Access Point PRODUCT OVERVIEW
Long Range Ceiling Mount Access Point 2.4 GHz 300Mbps 11b/g/n AP/WDS/Repeater PRODUCT OVERVIEW equips with an advanced RF interface coupled with 802.11n technologies, offering data transmission rate up
More informationGlobeSurfer III. Quick Start Guide
GlobeSurfer III Quick Start Guide GlobeSurfer III User guide 2 Welcome to GlobeSurfer III Welcome to the GlobeSurfer III, your 3G wireless gateway router that connects you to the internet, allows you to
More informationProduct Line Matrix: Instant Access Points. 100 Series Instant APs. 90 Series Instant APs
PRODUCT LINE MATRIX: Instant Access points RAP- Applications Description Secure 802.11n wireless and wired networking for SMBs and access to corporate resources from branch offices. It is is ideal for
More informationsuch as vehicle, and railway applications. TGAP-620-M12 is a reliable a/b/g/n WLAN Access Point with 2
TGAP-620-M12 Series Industrial EN50155 IEEE 802.11 a/b/g/n wireless access point with 2x10/100/1000Base-T(X), M12 connector Features Leading EN50155-compliant wireless access point for rolling stock application
More information802.11ac 3x3 Dual Band High-Powered Wireless Access Point/Client Bridge
Datasheet ECB1750 802.11ac 3x3 Dual Band High-Powered Wireless Access Point/Client Bridge The ECB1750 marks a new speed and performance breakthrough for users with 802.11ac laptops and other devices, who
More informationFeatures Wireless Feature
WAP-854NP Industrial Class IEEE802.11n 300Mbps 100mW Access Point W/ Dual-Detachable Antenna (Reverse SMA Connector), IEEE802.3af POE Built-in, IP50 Certificated Aspiring to provide the best performance/price
More informationSpectraGuard Sensor SS-300-AT-C-50 Technical Specifications
SpectraGuard Sensor SS-300-AT-C-50 Technical Specifications 1 Product Overview ITEM Product Name Model Number Power Supply SpectraGuard Sensor SS-300-AT-C-50 802.3af Class 0 Power Over Ethernet Nominal
More informationEAP1200H a/b/g/n/ac Dual Radio Concurrent Ceiling Mount AP
EAP1200H Key Features IEEE 802.11ac and IEEE 802.11 a/b/g/n compliant Up to 300Mbps (2.4GHz) + 867Mbps (5GHz) wireless data transmission rate Gigabit Ethernet port with IEEE 802.3 at standard PoE support
More information300Mbps n Ceiling-mount Wireless Access Point
300Mbps 802.11n Ceiling-mount Wireless Access Point Key Features Wireless Standard Compliance Compliant with IEEE 802.11n wireless technology with data rate of up to 300Mbps Backward compatible with 802.11b/g
More informationDual Band Long Range Multi-Function Access Point/ Client Bridge. Software Features System Requirement. Status
ECB600 is a wireless-11n 600Mbps (300Mbps + 300Mbps) High Power Dual Band concurrent Access Point/ Client Bridge. It allows simultaneous operation of 2.4GHz and 5GHz wireless network. With media-optimized
More informationUbiquiti UniFi UAP-Pro Access Point
Product Name: Manufacturer: - Model Number: UAP-PRO Please Note: The UAP-PRO is no longer available. For an alternative, we recommend the UAP-AC-PRO. Ubiquiti UniFi Pro Access Point (UAP-Pro) The Ubiquiti
More informationIndustrial Ultra Power over Ethernet Splitter IPOE-171S
Industrial Ultra Power over Ethernet Splitter IPOE-171S User s Manual Table of Contents 1. Package Contents... 3 2. Product Features... 4 3. Product Specifications... 5 4. Hardware Introduction... 8 4.1
More informationCisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch
Data Sheet Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch Improved Coverage, Easy to Deploy, Secure Business-Class Wireless-N Connectivity Highlights Provides cost-effective 802.11n
More informationCisco WAP321 Wireless-N Selectable-Band Access Point with Power over Ethernet
Data Sheet Cisco WAP321 Wireless-N Selectable-Band Access Point with Power over Ethernet Secure Wireless-N Networking with Gigabit Ethernet Connectivity Highlights Provides selectable-band high-bandwidth
More informationIndustrial 5-Port Fast Ethernet Switches with SFP Slot and optional 4 PoE PSE Ports. Basic Model: KSD-541 PoE Model: KSD-541-P. Installation Guide
Industrial 5-Port Fast Ethernet Switches with SFP Slot and optional 4 PoE PSE Ports Basic Model: KSD-541 PoE Model: KSD-541-P Installation Guide DOC.080104-1- (C) 2008 KTI Networks Inc. All rights reserved.
More informationFeatures. Preliminary. Industrial IEEE b/g/n with 2x10/100Base-T(X) 1x RS-232/422/485 IoT LTE LPWAN Gateway. Introduction
IMG-4312-MN Industrial IEEE 802.11 b/g/n with 2x10/100Base-T(X) 1x RS-232/422/485 IoT LTE LPWAN Gateway Features Provide 2x10/100Base-T(x) port and single SIM card slot LTE CAT-M1/CAT-NB1 model included
More informationap 2-w cybox ap 2-w Industrial and Mobile IEEE ac Dual Radio Wireless Access Point
es cybox ap 2-w cybox ap 2-w Industrial and Mobile IEEE 802.11ac Dual Radio Wireless Access Point 1 Designed for harsh Industrial and Mobile Applications 1 EN 50155 Compliant 1 Wall Mount Solution 3 Main
More informationHigh Power over Ethernet Midspans PD Port Model PD Port Model
Data and Power on a Single Line High Power over Ethernet Midspans PD-8006-6 Port Model PD-8012-12 Port Model User Guide Notice The information contained herein is believed to be accurate and reliable at
More informationNAP ac Dual-Radio Smart Antenna 3x3 Nebula Cloud Managed Access Point
NAP303 802.11ac Dual-Radio Smart Antenna 3x3 Nebula Cloud Managed Access Point The Zyxel Nebula NAP303 802.11ac Dual-Radio Smart Antenna 3x3 Nebula Cloud Managed Access Point is a high-performance 3x3
More informationHP 527 Dual Radio ac Unified Wired-WLAN Walljack
HP 527 Dual Radio 802.11ac Unified Wired-WLAN Walljack Installation Guide Part number: 5998-7087a Document version: 6W101-20150318 Legal and notice information Copyright 2015 Hewlett-Packard Development
More information300Mbps Wireless N Access Point
300Mbps Wireless N Access Point East Network Expansion with N300 Wi-Fi 300Mbps 2.4GHz Passive PoE 5dBi Antennas Highlights Reliable Wi-Fi for Home Entertainment Passive PoE Supported With the use of 2
More informationCisco Aironet 1250 Series Ordering Guide
Cisco Aironet 1250 Series Ordering Guide The Cisco Aironet 1250 Series is the first enterprise-class access point to support the IEEE 802.11n draft 2.0 standard that provides the versatility, high capacity,
More informationPRODUCT DESCRIPTION. Learn more about EnGenius Solutions at
Wireless Long Range Multi-function Client Bridge 2.4 GHz EIRP up to 400mW Access point Client Bridge Repeater Client Router PRODUCT DESCRIPTION is a powerful client bridge. It supports several networking
More informationBusiness Wi-Fi Solution. MODELS: AC500,AC50,CAP1750,CAP1200, CAP300,CAP300-Outdoor
Business Wi-Fi Solution MODELS: AC500,AC50,CAP1750,CAP1200, CAP300,CAP300-Outdoor Auranet Solution Business Integrated Wi-Fi Solution Experience the very latest in business-class Wi-Fi technology with
More informationFeatures and Benefits. Certifications
UC-5100 Series Arm-based Industrial computing platform for industrial automation Features and Benefits Armv7 Cortex-A8 1000 MHz processor Dual auto-sensing 10/100 Mbps Ethernet ports 4 software-selectable
More informationJanuary 21, 2011 Release 5
January 21, 2011 Release 5 is a registered trademark of Xirrus, Inc. All other trademarks and brand names are marks of their respective holders. Please see Legal Notices, Warnings, Compliance Statements,
More informationIndustrial IEEE a/b/g/n wireless access point with 2x10/100/1000Base-T(X) Features
Wireless Access Point DIN-Rail W Access Point v.0 / Feb, 0 / + IEEE 80. a/b/g/n wireless access point with x0/00/000base-t(x) Features Wireless Access Point High Speed Air Connectivity: W interface support
More informationAC Wireless Gigabit Access Point AP500. Highlights
AC 1900 Wireless Gigabit Access Point Highlights Superfast Wi-Fi Simultaneous 600Mbps on 2.4GHz and 1300Mbps on 5GHz totals 1900Mbps Wi-Fi speeds, ideal for 4K streaming and online gaming Superior Wi-Fi
More informationWireless AC2600 Wave 2 Dual-Band Unified Access Point
Product Highlights Next Generation Connectivity Features next-generation 802.11ac Wave 2 technology to deliver a reliable wireless connection at unparalleled combined speeds Unparalleled Performance Experience
More information1750Mbps 11ac Dual Band Wall Mount Enterprise Wireless Access Point WDAP-1750AC
1750Mbps 11ac Dual Band Wall Mount Enterprise Wireless Access Point WDAP-1750AC Presentation Outlines Product Position Applications Product Overview Web UI Product Installation Product Comparison Product
More informationProduct Features. Wireless Compliance: IEEE a Compliant IEEE b Compliant IEEE g Compliant IEEE n draft Compliant
The N-TRON 702-W Industrial Wireless Radio offers outstanding performance and ease of use. It is ideally suited for connecting wireless devices to a wired network or for connecting two wired networks where
More informationQuick Installation Guide. PT8133W: 1MP WPS n
PT8133/33W Quick Installation Guide English 繁中簡中日本語 Français Español Deutsch Português Italiano Türkçe Polski Русский Česky Svenska PT8133: 1MP PoE PT8133W: 1MP WPS 802.11n Warning Before Installation
More informationCradlepoint ARC CBA850 Specifications
Cradlepoint ARC CBA850 Specifications Figure 1: Cradlepoint ARC CBA850 Key Features Cloud-managed for zero-touch deployment and intelligent management Out-of-Band Management Integrated Multi-Carrier Software-Defined
More informationNetCom Plus 411 (NetCom 411, NetCom 411 PRO)
VS Vision Systems GmbH / Part Number 6670 Main Features Ethernet to serial 4 port RS232 Virtual Com Port driver for Windows Secure Server with latest SSL/AES-256 encryption Operation in Driver Mode, TCP/IP
More informationSee instructions to download and install the latest version of LinkBoxLON and the user's manual at
Safety Instructions WARNING Follow carefully this safety and installation instructions. Improper work may lead to serious harmful for your health and also may damage seriously the IntesisBox and/or any
More informationelettriche DataSheet Zeus Link_Wi-Fi_EN
Zeus Link Wi-Fi Wireless AP Bridge/Client/Router 230 Vac Power supply Small footprint: 1 DIN module only Fast Ethernet Interface USB 2.0 Mass storage interface to connect external 3G modem Firmware upgradable
More information